Papers

A utilização de dispositivos de dissipação de energia é vista como forma eficiente para proteger estruturas contra ações sísmicas. Os dispositivos Amortecedores de Líquido Sintonizados (ALS) são uma forma simples mas eficaz para reduzir a resposta de estruturas face a ações dinâmicas. Este artigo descreve simulações numéricas sobre o comportamento de ALS, isolados e/ou incluídos numa estrutura de transmissão, comparando-as com os resultados obtidos experimentalmente. Para o efeito foi usado um software de acesso livre denominado CLAWPACK com potencialidades para simular os fenómenos que ocorrem no interior de ALSs. O CLAWPACK consiste num conjunto de rotinas em Fortran desenvolvidas para obtenção de soluções numéricas de sistemas hiperbólicos de equações parcialmente diferenciais no tempo, como é o caso dos fenómenos não-lineares subjacentes à shallow water wave theory. Foram necessárias adaptações e ajustes em algumas das rotinas principais para permitir a simulação das excitações dinâmicas pretendidas. Nas simulações numéricas são variados alguns parâmetros, em que se incluem a altura de água, a amplitude de excitação e o número de dispositivos. Os principais resultados obtidos são comparados, com os resultados obtidos experimentalmente, tanto para dispositivos isolados como para dispositivos incluídos nas estruturas ensaiadas. As principais conclusões obtidas serão também apresentadas.

N/A

N/A

N/A

N/A

N/A

The increasing use of glazed areas in the building envelope can lead to high solar gains and glare problems that can strongly impact the entire building energy consumption, peak loads and indoor comfort. An important and fundamental strategy in sustainable building design for controlling solar heat gains and daylighting through fenestration is the use of shading devices. Therefore, it is recommended to use detailed models that can accurately estimate the optical properties of the different types of shading devices (such as roller blinds and venetian blinds) and include their effects in the glazing system analysis. This paper describes a net radiation method for determining both solar and visible optical properties of glazing with shading devices, particularly venetian blinds. Some numerical results were compared with in situ experimental measurements carried out in an outdoor test cell. The experimental work included the measurement of illuminance and irradiance fluxes and the determination of the visible and solar transmission properties of the fenestration system. The agreement between numerical predictions and experimental results was better for overcast than clear sky conditions. Moreover, a venetian blind control strategy that blocks direct solar radiation, whilst enabling the transmission of diffuse radiation to indoors, is implemented.

In Portugal, given the large proportions of natural regeneration pine stands, a large amount of young trees must be removed from the forest, to assure the quality of mature trees and to decrease the risk of fire. With this problem in mind, a national study was launched to investigate the use of maritime pine small-diameter poles in structural applications. The study had two different tasks. The first task comprised the determination of mechanical properties and the establishment of visual and mechanical strength grading procedures and is already completed. The second task concerns the development of connections. This paper presents results within the second task. Three types of connections, regarding failure load and stiffness, were studied: connections using central plates; glued-in rods; and dowel nuts. The glued-in rods showed the highest mean failure load and, especially, stiffness. Indeed, the glued-in rods showed a mean stiffness around six times higher than the one obtained for the other studied connections. Additionally, the applicability of European Yield Model to estimate the failure load of these connections is also discussed. DOI: 10.1061/(ASCE)ST.1943-541X.0000752. © 2013 American Society of Civil Engineers.

This work is inserted in a wider project aiming at the conservation and durability of historical renders, through compatibles techniques and materials; in particular the restitution of cohesion of historical renders, turned friable by the loss of binder due to physical or chemical actions, is studied. Surface consolidation, directed to restore cohesion and stability, is based on the use of materials with aggregating properties. This operation is reached usually through the application of organic or mineral consolidants, but inorganic consolidants (such as calcium hydroxide or ethyl silicate) are preferred due to better compatibility and durability. Based on the results of previous studies, two mineral compatible products were selected: a commercial suspension of nanoparticles of calcium hydroxide in propanol (Nanorestore); a silicate product, consisting on a limewater dispersion of ethyl silicate. Consolidation products were than applied on different mortars samples previously prepared, in order to assess their efficacy by determining their physical, mechanical and microstructural properties before and after the consolidation treatment. Mechanical and physical analyses were performed, such as compression and flexural strenght and superficial hardness. Microstructural and chemical analyses of the consolidation product and of the consolidated samples are also reported.

Most of rail transports are considered low-polluting means of transport to different extents, and therefore are designated as "friends" of the environment. However, there are several aspects of their operation which may constitute an environmental problem. Among these aspects, is to consider different types of contamination of the ballast and the soil in the platform of the railway and in the associated technical installations.