Artigos de Revista
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Comunicações
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Livros
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Capítulos de Livros
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Teses de Doutoramento
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Dissertações de Mestrado
Info
Characterization of mortar from Casa Barbot (Portugal), a case study from the beginning of the 20th century
The popularity of natural cement (Roman cement) in buildings from the late 19th and thebeginning of the 20th century and the high diversity of characteristics of natural cement demandresearch of mortar and binders used in the buildings of this period in Portugal. Understandingthe type of binder used in the historic buildings will help the project/intervention team to makethe best decisions in terms of the development of compatible mortars for historical conservationpurposes. Casa Barbot is one of the Art Nouveau examples of the beginning of the 20th century inPortugal. The garden of this building is characterized by peculiar elements in terms of materials andarchitecture. Full characterization of the mortars employed in the construction of this building as wellas identification of the used binder is the main objective of this study. The study comprises a widerange of laboratory characterization techniques such as X-ray fluorescence (XRF), X-ray diffraction(XRD), petrography, open porosity, density, water absorption by capillarity, and compressive strength.The results show the diversity of compositional characteristics in the mortars used in the decorativeelements in the period garden of Casa Barbot. All mortars are composed of Portland cement with amix of additives such as blast furnace slag, limestone filler, air lime, and the occasional presence ofcharcoal. The results raise doubt about the use of natural cement as stated in the historical documents.This study will broaden the scientific knowledge of the materials of that period in Portugal to providea comprehensive plan for the preservation of historical buildings.
Ano: 2023
Número Páginas:
18p..
Autor(es): Maljaee, H.; Velosa, A.; Santos Silva, A.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Conservation; Art Nouveau; Portland cement; Mortar; 20th century
Info
Composition of renders and plasters of award-winning buildings in Lisbon (Portugal): A contribution to the knowledge of binders used in the 20th Century
This paper reports on the study of renders and plasters from 20th-century award-winning buildings in Lisbon (Portugal) with the Valmor Prize for Architecture. The mortars have been investigated through XRD, optical and electronic microscopy (SEM-EDS), thermal analysis (TGA/DTA), wet chemical analyses and AAS. The results reveal that the use of air lime lasted until the 1940s. It also highlights the beginning of using of Portland cement in mortars in the 1930s, mixed with airlime, and the abandonment of mortar formulations solely based on air lime. This study highlights the use of finishing lime-gypsum-based mortars until the 1940s and different types of Portland cement from the 1940s onwards. Portland cement was the main binder for the analysed stoneimitating mortars from 1940s to 1970s. Finally, salt contamination was occasionally found in mortars, which generally reveal a good state of conservation
Ano: 2023
Número Páginas:
31p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: International Journal of Architectural Heritage
Editor: Taylor & Francis
Keywords: Pasters; Renders; Mineralogy; Microscopy; Hydraulic mortars; Characterisation; Aerial mortars; 20th century
Info
Conceptual and quantitative categorization of wave
Beaches combined with sloping structures are frequently the frst element of defense to protect urban areas from the impact of extreme coastal fooding events. However, these structures are rarely designed for null wave overtopping discharges, accepting that waves can pass above the crest and threat exposed elements in hinterland areas, such as pedestrians, urban elements and buildings, and vehicles. To reduce risks, Early Warning Systems (EWSs) can be used to anticipate and minimize the impacts of fooding episodes on those elements. A key aspect of these systems is the defnition of non-admissible discharge levels that trigger signifcant impacts. However, large discrepancies in defning these discharge levels and the associated impacts are found among the existing methods to assess foodings. Due to the lack of standardization, a new conceptual and quantitative four-level (from no-impact to high-impact) categorization of food warnings (EW-Coast) is proposed. EW-Coast integrates and unifes previous methods and builds on them by incorporating feld-based information. Thus, the new categorization successfully predicted the impact level on 70%, 82%, and 85% of the overtopping episodes afecting pedestrians, urban elements and buildings, and vehicles, respectively. This demonstrates its suitability to support EWSs in areas vulnerable to wave-induced fooding.
Ano: 2023
Autor(es): Zózimo, A. C.; Fortes, C. J. E. M.; Ferreira, A. M.; Reis, M. T. L. G. V.; Ferreira, O.; Garzon, J.L.
Revista: Scientific Reports
Editor: Communications Engineering
Info
Conservação e restauro de edifícios antigos: soluções multifuncionais compatíveis de revestimento de paredes.
N/A
Ano: 2023
Número Páginas:
22-25pp..
Autor(es): Veiga, M. R.
Revista: Construção Magazine
Editor: Engenho e Média, Lda
Volume:
nº 115.
Keywords: edificios antigos; revestimento de paredes; restauro; Conservação
Info
Cooperativas, coohousing e habitação colaborativa ou participada
No presente artigo abordam-se, sumariamente, algumas matérias ligadas à habitação dirigida para idosos e fragilizados, promovida correntemente por cooperativas de habitação, ou no âmbito dos atuais processos propostos de
Ano: 2023
Número Páginas:
10p..
Autor(es): Baptista Coelho, A.
Revista: Infohabitar
Editor: Associação Portuguesa para a Promoção da Qualidade Habitacional - GHabitar APPQH
Volume:
Ano XIX, n.º 858.
Keywords: Intergeracionalidade; Habitação para idosos; Habitação intergeracional; Habitação
Info
Damage Evolution in Physical Scale Model Tests of a Stretch of the Breakwater of Peniche Harbour.
During physical scale model tests of rubble mound breakwaters, the assessment of the eroded volume of the armour layer subjected to incident sea waves can be determined from consecutive surveys of the surface of the armour layer after each test run. This enables one to assess the damage level of the struc ture by comparing erosion profiles and by the eroded volume between consecutive surveys of the tested section. The present study aimed to evaluate the damage evolu tion of a section of the Peniche harbour west breakwater, whose armour layer is made of tetrapods, A dimensionless damage parameter was computed, based on the eroded volume at the end of each test. The test program consisted of three test series (A, B and C) with different durations and wave conditions sequences, considering the low-water level (water depth of 0.20 m at the toe of the structure) and high-water level (0.24 m) and sea states with peak periods Tp = 1.70 s and Tp = 1.98 s and significant wave heights, Hm0, ranging between 0.12 m and 0.19 m. The model was built and operated according to Froude
Ano: 2023
Autor(es): Mendonça, A. C.; Santos, J. A.; Fortes, C. J. E. M.; Lemos, R.
Editor: Rilem
Keywords: 3D surface model; Position sensor; Damage evolution; Breakwater
Info
Damage Evolution Prediction during 2D Scale-Model Tests of a Rubble-Mound Breakwater: A Case Study of Ericeira
Melby presents a formula to predict damage evolution in rubble-mound breakwaterswhose armour layer is made of rock, based on the erosion measured in scale-model tests and thecharacteristics of the incident sea waves in such tests. However, this formula is only valid for armourlayers made of rock and for the range of tested sea states. The present work aims to show howthe Melby methodology can be used to establish a similar formula for the armour layer damageevolution in a rubble-mound breakwater where tetrapods are employed. For that, a long-durationtest series is conducted with a 1:50 scale model of the quay section of the Ericeira Harbour breakwater.The eroded volume of the armour layer was measured using a Kinect position sensor. The damageparameter values measured in the experiments are lower than those predicted by the formulationfor rock armour layers. New ap and b coefficients for the Melby formula for the tested armour layerwere established based on the minimum root mean square error between the measured and thepredicted damage. This work shows also that it is possible to assess the damage evolution in scale model tests with rubble-mound breakwaters by computing the eroded volume and subsequently, thedimensionless damage parameter based on the equivalent removed armour units.
Ano: 2023
Autor(es): Fortes, C. J. E. M.; Santos, J. A.; Lemos, R.
Revista: Modelling
Editor: MDPI
Keywords: Position sensor; Damage evolution; Rubble-mound breakwater
Info
Damage of Infill Masonry Walls due to Vertical Loads in Buildings with Reinforced Concrete Structure
Buildings are subjected to deformations of their reinforced concrete structure due to vertical loadsthat can lead, in certain cases, to the significant cracking of the unreinforced masonry (URM) infill walls,therefore requiring the development of specific knowledge of these types of deformations in order to minimisethem.Aiming the evaluation of buildings with reinforced concrete structures subjected to vertical deformations, themechanical characteristics of their infill masonry walls, as well as of their interface with the supportingconcrete elements, are here analysed. The basic compression behaviour of brick masonry is assessedparticularly through the previous analysis of a vertical compression test of a masonry specimen. Themechanical behaviour characteristics of the constituents (bricks, and mortar joints) are analysed to account fortheir influence on the compression behaviour of masonry infill, aiming particularly for the prevision of theircracking in case of vertical deformations of the supporting reinforced concrete (RC) elements. Based on thatevaluation, the analysis of masonry walls subjected to vertical deformations of their supports is made throughthe assessment of the relevant characteristic behaviour of masonry wall-beam/slab assembly in case of verticalload. A general modelling approach of the behaviour of URM infills and the interaction with their supports isgenerally accessed. Finally, the preventive control of deformations of masonry wall-beam/slab assembly isdiscussed.
Ano: 2023
Número Páginas:
32-49pp.
Autor(es): Miranda Dias, J.
Revista: Journal - WSEAS Transactions on Applied and Theoretical Mechanics (artigo disponível no link: https://wseas.com/journals/articles.php?id=7765)
Editor: WSEAS TRANSACTIONS
Volume:
Vol. 18, Art. #4.
Keywords: Buildings; Vertical loads; Reinforced concrete elements; Masonry infill walls
Info
Damage of infill masonry walls due to vertical loads in buildings with reinforced concrete structure
Buildings are subjected to deformations of their reinforced concrete structure due to vertical loads that can lead, in certain cases, to the significant cracking of the unreinforced masonry (URM) infill walls, therefore requiring the development of specific knowledge of these types of deformations in order to minimise them.Aiming the evaluation of buildings with reinforced concrete structures subjected to vertical deformations, themechanical characteristics of their infill masonry walls, as well as of their interface with the supportingconcrete elements, are hereanalysed. The basic compressionbehaviour of brick masonry is assessedparticularly through theprevious analysis of a vertical compression test of a masonry specimen. Themechanical behaviour characteristics of the constituents (bricks, and mortar joints) are analysed to account for their influence on the compression behaviour of masonry infill, aiming particularly for the prevision of theircracking in case of vertical deformations of the supportingreinforced concrete (RC) elements. Based on thatevaluation, the analysis of masonry walls subjected to vertical deformations of theirsupports is made throughthe assessment of the relevant characteristic behaviour of masonry wall-beam/slab assembly in case of vertical load. A general modelling approach of the behaviour of URM infills and the interaction with their supports is generally accessed. F inally, the preventive control of deformations of masonry wall-beam/slab assembly is discussed
Ano: 2023
Número Páginas:
32-49pp..
Autor(es): Miranda Dias, J.
Revista: WSEAS Transactions on Appled and Theoretical Mechanics
Editor: WSEAS
Volume:
Vol. 18, Art.#4.
Keywords: Buildings; Vertical loads; Reinforced concrete elements; Masonry infill walls
Info
DB-HERITAGE Building Materials Data Aggregation in ARIADNE - challenges and opportunities
DB-HERITAGE provides open and free sharing of wide-ranging technical data on hundreds of samples of building materials from diverse periods, extracted from Portuguese built heritage all over the world. It has been developed to improve know-how for historic building materials and as a basis for developing best practices for built heritage conservation. It incorporates both physical and digital repositories for building material samples and related data, providing tools for the systematic recording of data concerning the history, properties, and performance of materials used in Portuguese built heritage.DB-HERITAGE targets different communities, researchers, and stakeholders involved in the preservation of archaeological and architectural heritage. It provides a systematisation of building assets, within their related environmental, social, and cultural contexts, as well as displaying technical and scientific information on structural elements, built components and their constituent materials. Although the rationale of the wide context sustaining the DB-HERITAGE concept is clear, coordinating communities and reduced time-to-value represent extra requirements for data quality, improved tools, and an efficient management plan.The participation in ARIADNEplus challenged DB-HERITAGE to get the most out of standardised procedures and the FAIR principles, strengthening its data management plan and practices. Data processing has been improved by deploying a common ontology and further developing standards, shared semantics, and identifiers. Updated protocols for data sharing and detailed information on provenance have also been developed to enhance data reuse.This article presents an overview of the aggregation process of DB-HERITAGE data into ARIADNEplus. It includes a summary of DB-HERITAGE's strengths and of the challenges faced within the scope of the aggregation process, with examples of some of DB-HERITAGE's major outputs. Additionally, it considers the benefits and opportunities provided by participation in ARIADNEplus.
Ano: 2023
Autor(es): Santos Silva, A.; Correia, M. J.
Revista: Internet Archaeology
Editor: UY
Volume:
64.
Keywords: FAIR data; building materials; heritage assets conservation; heritage safeguard
|
Relatórios
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Informações Científicas e Técnicas
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Memórias
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|
Outros
Info
Dynamics of CO2, CH4, and N2O in Ria Formosa coastal lagoon (southwestern Iberia) and export to the Gulf of Cadiz
A first characterization of greenhouse gases had been carried out to study their role and impact in a productive transitional coastal system of the southern Portugal
Ano: 2024
Número Páginas:
17p..
Autor(es): Cravo, A.; Rodrigues, M.; Forja, J.; Ortega, T.; Correia, C.; Sierra, A.
Revista: Science of the Total Environment
Editor: Elsevier
Volume:
(906)167094.
Keywords: Coastal lagoon; Ria Formosa; Gas mass transport; Water - atmosphere fluxes; Greenhouse gases
Info
Global and local geometrical imperfections of pultruded GFRP profiles based on a modal approach
ABSTRACT - The ultimate capacity of pultruded glass fibre reinforced polymer (pGFRP) profiles depends significantly on geometrical imperfections (GIs), given their sensitivity to buckling phenomena arising from both thin walls and low elastic moduli. However, GIs are not yet comprehensively addressed in design guidance. This paper proposes a new approach to characterize the initial GIs of pGFRP profiles based on a modal approach. Given the lack of comprehensive knowledge in this area, this study presents a highly accurate and robust methodology to measure GIs and dimensional deviations (DDs) in pGFRP profiles using a 3D contact coordinate measurement machine (CMM). The modal approach encompasses the measurement of dimensional parameters and a point cloud transformation that enables the assessment of GIs associated with pure buckling modes of pGFRP profiles. This procedure allows the quantification of three types of global GIs associated to (i) minor-axis (weak axis), (ii) major-axis (strong axis) bending, and (iii) twist. Additionally, the procedure also includes the assessment of local GIs, considering the wall (plate-like) imperfections. The separation of GIs into these four types (shape and amplitude) is of major relevance as its paves the way to the development of analytical design formulas for the strength prediction of pGFRP members. The approach described in this paper also serves two important purposes: (i) the statistical analysis of DDs and GIs of pGFRP members, and (ii) the identification of distinct shapes and amplitudes of GIs that form the basis for reliable design considerations of pGFRP members.
Ano: 2024
Número Páginas:
18p..
Autor(es): Silvestre, N.; Correia, J.; Pinheiro, A.; Ribeiro, A.; Lages Martins, L.; Lazzari, J.
Revista: Construction and Building Materials
Editor: ELSEVIER
Volume:
412 (2024) 134813.
Keywords: Modal decomposition; Geometrical imperfections; Dimensional deviation; 3D contact measurements; Pultruded profiles; Glass fibre reinforced polymer (GFRP)
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Número Páginas:
26p..
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: Compatibility; 20th century; Portland cement; Lime
Info
20th Century Mortars: Physical and Mechanical Properties from Awarded Buildings in Lisbon (Portugal)
This paper addresses the study of renders and plasters
Ano: 2023
Autor(es): Mirão, J.; Veiga, M. R.; Santos Silva, A.; Almeida, L.
Revista: buildings
Editor: MDPI
Volume:
13.
Keywords: compatibility; 20th century; Portland cement; lime
Info
2DH modelling and mapping of surfbeat-driven flooding in the shadow of a jettied tidal inlet
Near estuaries and harbours, submerged shoals and defence structures impact the exposure to overtopping. These features may be accounted for in two-dimensional horizontal (2DH) numerical models, either based on phase resolving or phase-average solvers for wave propagation. In between, surfbeat solvers, such as in XBeach, combine an affordable computational cost with the ability to generate and propagate the longer infragravity (IG) waves. However, surfzone wave characteristics and the overtopping exposure modelled with XBeach are sensi tive to settings such as the shape of the forcing wave spectra and the numerical scheme for wave propagation. The present paper explores this sensitivity and assesses the performance of different inundation models built with the 2DH surfbeat solver of XBeach. These models were forced with downscaled water levels and directional wave spectra and the results fuelled a discussion bounded by data collected downdrift of the entrance to the harbour of Figueira da Foz (Portugal). The original second-order upwind scheme, which propagates short-waves with a lower numerical diffusion improved the model performance in terms of long-wave height, and an unconventional breaking criterion better represented the cross-shore distribution of short-wave height near the shore. A cali brated model was validated through the hindcast of an overtopping event observed under moderate swell forcing, and was used to map the overtopping exposure during a hypothetical combination of an energetic swell with a water level having a return period of ~70 years. Compared to the default wave spectra shape and model settings, using an appropriate representation of the short-wave directional spectrum at the open boundary was necessary to reproduce the observed overtopping extent. Refining the cross-shore resolution of the model helped to better represent the observed inundation extents, as also did the reduction of the friction coefficient. Addi tional phase-resolving simulations in 1DH overestimated IG wave energy and produced higher and more frequent overtopping discharges. The differences with the calibrated 2DH surfbeat model increased with the proximity of the inlet and with short-wave height and angle of incidence. Overall, required calibration steps were provided. They aim at making 2DH XBeach surfbeat a credible tool for 1) predicting short and IG wave characteristics up to the shoreline, as well as for 2) providing first estimates of exposure to overtopping in areas with shallow and alongshore-irregular morphologies.
Ano: 2023
Número Páginas:
1-21pp.
Autor(es): Freire, P.; Baptista, P.; Silva, P. A.; Henriques, M.; Azevedo, A.; Oliveira , F.; Fortunato, A. B.; Nahon, A.
Revista: Coastal Engineering
Editor: Elsevier B.V.
Volume:
184.
Keywords: XBeach; Infragravity waves; Ebb-tidal delta; Intermediate beach; Overtopping
Info
A ciência é do povo? Citizen science, reflexões sobre o conceito e os processos científicos da produção da verdade num mundo cada vez mais inseguro
À medida que as ameaças ambientais se multiplicam à escala global exige-se uma mais apurada reflexividade sobre as práticas humanas, as formas de utilização dos territórios e seus recursos e a capacidade de previsão e resposta quanto a eventos ambientais extremos, socialmente disruptivos. Ora, é esta capacidade de previsão que a ciência experimenta em uma dimensão cada vez menos segura, entrando em crise os modelos causais e a pertinência do conhecimento empírico baseado em observações do passado, pois o futuro torna-se progressivamente mais incerto e ameaçador. Incerteza e ameaça que se antecipam em cada crise, sob a manifestação dos riscos ambientais [1]. Algumas destas manifestações tornam-se indetetáveis para os sentidos humanos, a não ser pela própria visibilidade das consequências. As comunidades humanas encontram-se, assim, cada vez mais dependentes da análise e do discurso da ciência para perceberem (mesmo que na impossibilidade de compreenderem com exatidão os mecanismos de exposição) os riscos a que estão expostas. A humanidade parece, pois, acossada numa estrutura medieval do medo, o medo do invisível, na emergência de um novo tipo de sociedade colonizada pelo medo e que dá lugar a todas as derivas políticas [2]....
Ano: 2023
Autor(es): Craveiro, J.
Revista: Plataforma Barómetro Social
Editor: Instituto de Sociologia da Universidade do Porto
Keywords: Citizen Science.; Participação; Riscos ambientais
Info
A comprehensive performance assessment system for diagnosis and decision-support to improve water and energy efficiency and its demonstration in Portuguese collective irrigation systems.
In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.
Ano: 2023
Número Páginas:
15p..
Autor(es): Alegre, H.; Cordeiro, D.; Arranja, C.; Moreira, M.; Beceiro, P.; Loureiro, D.
Revista: Agricultural Water Management
Editor: Elsevier
Volume:
Vol- 275.
Keywords: Water Users Association; Water and energy efficiency; Performance assessment system; Decision support; Diagnosis; Collective irrigation systems
Info
A European and Brazilian cross-national investigation into the Portuguese translation of soundscape perceptual attributes within the SATP project
This paper presents a cross-national investigation into the soundscape perceptual attributes translation from English into European and Brazilian Portuguese. It is a study within the scope of a larger project
Ano: 2023
Autor(es): Ribeiro, L. C.; Alves, S.; Carvalho, M. L. U.; Michalski, R.; Antunes S.
Revista: Applied Acoustics
Editor: Elsevier
Volume:
Vol. 211.
Keywords: ISO/TS 12913-2:2018; Translation Cross-national; Soundscape attributes
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Ano: 2023
Número Páginas:
420
Autor(es): Teixeira, P.; Didier, E.
Revista: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
Aerodynamic characterization of the 516 Arouca Pedestrian suspension Bridge over the Paiva River
Given the 516 Arouca pedestrian suspension bridge
Ano: 2023
Número Páginas:
18 pp.
Autor(es): Marques da Silva, F.
Revista: Wind
Editor: MDPI
Volume:
3.
DOI:
10.3390/wind3010006
Keywords: wind tunnel; wind loading; suspended bridges
|