Publications

Apresenta-se um método expedito, baseado em ábacos, de estimativa de caudais de ventilação natural considerando as componentes eólica e térmica

Apresentam-se modelos preditivos para a ventilação natural, como contribuição para a redução de sistemas AVAC, mantendo a Qualidade do Ar Interior.

A ventilação natural requer a estimativa adequada dos caudais de ar em circulação, as taxas de renovação, função da velocidade do vento e da distribuição de pressão na envolvente. A turbulância atmosférica introduz perturbações neste processo simplificado induzindo variações na velocidade e direcção do vento, podendo dar origem a reversões do escoamento.

Probabilistic seismic hazards maps have been prepared either for the archipelago of the Azores in general terms, or for the islands of the Central Group using updated seismic information for the region, including a revision of the earthquake catalogue for the period 1522-1998. Two different approaches were used: (i) a standard seismic source model and (ii) a semi-zonified source model based on spatially smoothed seismicity where no delineation of seismic sources is needed. Preliminary data point out that high PGA values were obtained for an area located to the west of the Central Group and for an area between Terceira and the São Miguel Islands. Deaggregation of hazard for some counties was evaluated and results are presented in terms of mean and modal values of magnitude and distance, showing that the main contributions to hazard in all counties are from close-in and not very severe earthquakes.

Neste artigo apresentam-se inicialmente algumas considerações sobre ensaios dinâmicos in situ de estruturas, focando-se em especial a utilização de ensaios de vibrações ambiente para a avaliação das características dinâmicas de estruturas de pontes. São referidos vários trabalhos onde foram utilizados ensaios deste tipo. Descrevem-se em seguida dois estudos recentemente realizados pelo LNEC com vista à caracterização dinâmica da ponte da Arrábida na cidade do Porto e da ponte da Figueira da foz, apresentando-se o equipamento utilizado, as técnicas de ensaio e análise adotadas e os resultados obtidos.

The Azores Islands are located in the mid-Atlantic region near the triple junction where the Euro-Asiatic-African-American plates join together. Seismic activity in the area is very high, as can be observed either from historical events since the fifteenth century, from present day microseismicity, and from direct and indirect measurements of recent tectonic deformation. Volcanic activity is also present throughout the region.All available information, even data exhibiting low quality, was used to develop hazard models of São Miguel Island. Source zones were established based on both the global tectonic behaviour of the region and on the local active fault structures. Recurrence laws for São Miguel Island, for which historical information seemed quite incomplete, were obtained from the large events in the entire archipelago and from their remarkable pattern of time and space dependence, and complimented by information on long-term fault deformation (for the longer recurrence periods) and on high precision instrumental network (for the very short recurrence periods).Attenuation laws were derived from data on events felt and/or recorded in the Island.Hazard maps were obtained through a modified version of McGuire's algorithm for several geometries of source areas and results compared with the maximum observed intensity of historical events.

O presente relatório descreve os estudos efetuados no LNEC, que visaram o desenvolvimento e implementação computacional de um algoritmo representativo das relações histeréticas forças-deslocamentos generalizados observados em ensaios de elementos de betão armado sujeitos à flexão.Foi dado um carácter geral à implementação do modelo e, de forma a poder ser usado em trabalhos futuros de análise dinâmica em regime não linear de estruturas de betão armado, sujeitas à ação dos sismos. O algoritmo computacional resultante é suficientemente versátil uma vez que através da introdução de alguns parâmetros pode reproduzir diferentes comportamentos estruturais, tais como: degradação de rigidez e resistência, efeito de

Double-skin facade is an architectural/engineering solution developed from the need to increase comfort in buildings with full glazed facades. The actual concept of holistic approaches to the building energy system considers DSF as an element of an Advanced Integrated Facade. DSF were developed for colder climates and uncertainty remains on their applicability to warmer areas. Moreover there is a need for data under post-occupancy buildings in order to properly evaluate how they work from comfort and energy use points of view and to improve and validate models and predictions from design tools. Double skin facades (DSF) may show different layouts, flow path or type of ventilation (natural, mechanical or hybrid). In order to evaluate the thermal behaviour of such a facade LNEC (39º N) assembled a south facing test facility allowing changing among some of the possible configurations. Being a reversible flow type of DSF it means that it is possible to test configurations such as (according to the classification established within the IEA ANNEX 44 (Marques da Silva and Gosselin, 2006)): Outdoor Air Curtain (OAC); Indoor Air Curtain (IAC); Exhaust Air (EA), or; Supply Air (SA). It is also possible to use any kind of ventilation type, the layout being established as a box window (BW) or, as a limit, a Buffer (Bf) configuration. Some of these DSF configurations have been tested by others authors through either test cells experiments (Saelens, 2002) or field monitoring (Corgnati et al.,2003; Marques da Silva et al., 2005, 2006, 2008

A wide experimental campaign on transparent advanced integrated façades with a mechanically, naturally andhybrid ventilated air gap has been carried out both at the Department of Energetics at Politecnico di Torino and at Laboratório Nacional de Engenharia Civil (LNEC) in Lisbon. Measurements were performed by means of: - the TWINS (Testing Window INnovative Systems); test facility, at Politecnico di Torino; the reversible flow type DSF test cell, at LNEC. At Politecnico di Torino a mechanically ventilated climate façade and a hybrid ventilated DSF with an outdoor air curtain ventilation scheme have been investigated. At LNEC a naturally ventilated DSF with different ventilation schemes (outdoor air curtain, indoor air curtain, exhaust air, supply air or, as a limit, a buffer configuration) has been tested. The energy efficiency and thermal comfort implications of these different types of advanced integrated façade have been evaluated. Theimprovement of performance by varying configurations and operative conditions has also been investigated.

The development of the Portuguese National Annexes of Eurocode 8 required the definition of a seismic zonation for Portugal. The goal of this paper is to present the applied methodology to perform the Probabilistic Seismic Hazard Analysis (PSHA) and to obtain seismic zonation for Portugal Mainland, Azores and Madeira Archipelagos. Similarly to the Portuguese code presently enforce (RSA, 1983), two scenarios were considered in PSHA computation: (i) a scenario labeled seismic action 1, characterizing earthquakes with their epicenters mainly offshore and (ii) a scenario labeled seismic action 2, referring to events with their epicenters mainly inland. The model of gross-source zones and the parameters defining seismic occurrence process in each source zone, like the Poissonian process and the exponential distribution of magnitudes, was adapted from Sousa (1996). Two different spectral attenuation laws were applied, consistent with the two above mentioned seismic scenarios, namely: (i) a recent regional attenuation law derived for Portuguese seismotectonic environment, based on a finite fault non-stationary stochastic seismological model calibrated for the region (Carvalho et al., 2008), valid for seismic action 1 and (ii) the Ambraseys et al. (1996) model, valid for seismic action 2. The PSHA was performed for all Portuguese counties and for the 475 years return period. The correspondent hazard map was used as the basis for seismic zonation. Portuguese counties were sorted according to their Housner intensity, which was used as a criterion to classify each county in a pre-defined number of seismic zones.

One of the goals of the COVICOCEPAD project is to develop a mathematical model of tuned liquid dampers (TLD) devices. This new model will take into account the damping forces resisting the actions resulting from the viscous interactions between the liquid and its rigid container, the hydrodynamic head losses subsequent to orifices passing and the internal viscosity of the liquid. To calibrate the mathematical models full scale tests on shaking table are being performed. A performance evaluation of the TLD devices will be accomplished by the comparison between the behaviour of a specific structure with and without passive protection. This work addresses on the possibility of exploiting the liquid sloshing motion in tanks for specific vibration control purposes of civil engineering structures. Analytical, numerical and experimental issues are referred and the test steel frame is presented.

Seismic protection systems may be classified in three main categories: pas-sive, active and semi-active. The goal of this paper is to provide a global and current vision of the active and semi-active seismic protection systems. Basic concepts are presented, several devices operations are briefly described and also the main advantages and disadvantages.

Nesta comunicação são apresentados os testes efetuados com um modelo de edifício assimétrico, em alvenaria de pedra, sob diferentes condições de reforço. O estudo em causa foi desenvolvido no âmbito do projeto

Os efeitos dum sismo num sistema de distribuição de água (SDA) traduzem-se em danos físicos e em danos funcionais. Os primeiros consistem geralmente em roturas nas condutas enterradas, cedência das juntas, fendilhação ou colapso em reservatórios, avarias em estações de tratamento, falhas em estações elevatórias, etc. Os danos funcionais são consequência dos primeiros e manifestam-se com a diminuição do caudal abastecido ou mesmo a sua interrupção, abaixamento da pressão disponível e potenciais problemas de qualidade da água, causados por contaminação da água transportada. Estes sistemas funcionam sob pressão, o que significa que, para além da interrupção topológica, a falha de uma conduta se reflete no funcionamento hidráulico do conjunto, caso aquela esteja inserida numa malha.O objetivo do trabalho descrito no presente artigo é o de avaliar o risco de falha de um SDA sujeito à ação de sismos. Para o efeito recorre-se a uma ferramenta computacional integrada num sistema de informação geográfica (SIG). Este sistema integra toda a informação de base necessária à simulação do cenário sísmico, avalia o efeito das solicitações sísmicas num simulador hidráulico da rede, sintetiza os resultados de forma automática e mapeia-os. A simulação recorre ao software de simulação hidráulica Epanet 2.0 para avaliar o impacto da desativação de cada conduta em termos de pressão e eventual diminuição do caudal abastecido à rede. São utilizados modelos estatísticos relativos a danos físicos no SDA que são função da amplitude do movimento transiente do terreno resultante da propagação das ondas sísmicas e do movimento permanente do terreno devido à liquefação. É efetuada uma aplicação ilustrativa a um SDA de um concelho da Área Metropolitana de Lisboa, partindo-se de um cenário sísmico derivado da desagregação da perigosidade sísmica do local, para o período de retorno de 475 anos, e avaliando a ação sísmica à superfície considerando as condições geotécnicas locais.

Esta comunicação descreve os ensaios efetuados no LNEC a nós viga-pilar e pilar-fundação de uma solução pré-fabricada de betão armado para edifícios. Este sistema estrutural foi anteriormente testado num ensaio em mesa sísmica, recorrendo a um modelo de 2 pisos à escala 1:3. O trabalho apresentado nesta comunicação resultou da necessidade, que surgiu, em avaliar com maior pormenor o comportamento estrutural dos nós de ligação entre elementos pré-fabricados, cuja importância para o comportamento global da estrutura foi confirmada no ensaio em mesa sísmica. Assim sendo, foram efetuados ensaios quasi-estáticos, monotónicos e cíclicos, a ligações viga-pilar e a ligações pilar-fundação. Nesta comunicação apresenta-se a descrição do programa experimental e um resumo dos principais resultados obtidos. Apresenta-se também as principais conclusões que foram possíveis extrair deste trabalho, com maior ênfase no comportamento sísmico das ligações.

Double Skin Façades are characterized by having at least two membranes between the interior occupied space and the exterior environment, separated by an air gap. They are becoming a possible solution to design new and retrofitted aesthetic buildings, with a great visual connection to the outside. They also allow for the possibility of using natural ventilation techniques on buildings, even when subjected to great external noise and wind loads. This paper presents the results of two post-occupancy monitoring campaigns, during the summer and winter seasons respectively, on a DSF building situated in Lisbon.The experimental data showed a close dependency of the air gap temperatures on incoming radiation and outdoor temperature and also on the type of shading device. These results can provide useful information for the design of DSF configuration and ventilation strategies to achieve an overall performance improvement under typical Portuguese weather conditions.

This paper presents the results of shaking table tests performed on two full-scale masonry houses typical from North-European countries. The main objective of the experimental study is to assess the seismic behaviour of such houses for situations of low to moderate seismicity and to investigate the actual effect of some reinforcing details.

This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe

The applications of discrete elements models based on rigid block formulations to the analysis of masonry walls under horizontal out-of-plane loading is simplified block pattern are addressed. Two procedures for creating irregular block systems are presented, one using Voronoi polygons, the other based on a bed and cross joint structure with random deviations. A test problem provides a comparison of various regular and random block patterns, showing their influence on the failure loads. The estimation of manual frequencies of rigid block models, and its application to static pushover analyses, is addressed. An example of application of rigid block model to wall capacity problem is presented.

The overall aim of Sub-Project 10 (Earthquake disaster scenario predictions and loss modelling for urban areas) has been to create a tool, based on state-of-the-art loss modelling software, to provide strong, quantified statements about the benefits of a range of possible mitigation actions, in order to support decision-making by urban authorities for seismic risk mitigation strategies. A further larger aim has been to contribute to a seismic risk mitigation policy for future implementation at European level. Among the European cities for which loss estimation studies have been carried out are Istanbul, Lisbon and Thessaloniki, and tools, using GIS mapping, have been developed by research teams in each of these cities; these were made available for further development to examine mitigation strategies within SP10. Related research studies

Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. One European result is EN 1998, which will be in several years the main seismic code for all European countries. But it is well known, that older existing structures cause in many large earthquakes much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical - structures and lifeline structures must have priority. In September 2004 the European Integrated Research Project LESSLOSS on Risk Mitigation for Earthquakes and Landslides was started. The project will run for three years and comprises 13 Sub-Projects (SP´s). The consortium consists of 46 partners (see http:\\www.lessloss.org). LESSLOSS SP5 is on In-situ Assessment, Monitoring and Typification of buildings and Infrastructure. The project partners of SP5 are ARS, CESI, LNEC, RWTH and VCE. This Sub Project focuses mainly on the assessment of important existing structures and tries to integrate experimental methods into the assessment procedure. The progress of SP5 obtained in the first year is summarized in this paper. Highlights presented by all partners are mentioned and the assessment of Hospital Innsbruck is presented in more detail. The most innovative task of LESSLOSS/ SP5 is Update of vulnerability estimates via monitoring, which was also started in the first year.

In order to study the behavior of bridge structures in relation to traffic, wind and seismic loads, it is extremely important to know their actual dynamic properties (natural frequencies, vibration mode shapes and damping). The experimentally identified dynamic properties of bridge structures are also an effective way to characterize their actual global structural behavior. Whether included in the reception load tests of recently built bridges, before they are opened to the traffic, or as part of the inspection works of bridges already in service, LNEC has performed modal analysis studies based on the results of ambient vibration tests. Some of the studies carried out recently in important bridges are reported in this paper.

O sismo de Northridge ocorreu na parte norte da área metropolitana de Los Angeles, Califórnia, às 4:31 h do dia 17 de janeiro, uma segunda-feira coincidente com dia de feriado nacional, tendo atingindo uma magnitude de 6.6 na escala de Richter. O número total de vítimas mortais cifra-se em 57, havendo para cima de 8 000 feridos e 20 000 desalojados.As estimativas de perdas totais, feitas em meados de fevereiro de 1994, apontavam para valores de 15 biliões de US dólares, tendo o Estado da Califórnia apresentado um impacto económico total de ordem dos 30 biliões de dólares, perto do valor do Orçamento Geral do estado Português para 1994. Os prejuízos infligidos na indústria e no comércio são também surpreendentemente elevados, exigindo longos períodos de interrupção das atividades económicas.

Within the realm of natural hazards, geohazards are recognised as being particularly complex and often having the potential of triggering disasters. This complexity has led to increased political commitment and interest in engaging multi-stakeholder and citizens in disaster risk management. The AGEO project explored new forms to foster collaboration between civil society and authorities, using the rapidly developing field of citizen science and its innovative tool of citizens

Communicating science within disaster risk reduction using methods that encourage two-way dialogue between scientists and laypersons is a challenging task. This paper aims at presenting a methodological strategy of communicating risk and non-structural seismic protection measures through participatory approach. Such methodological strategy is part of a pilot experience of risk communication in two schools in Lisbon (Portugal) under the EU project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements). The efficacy of education for seismic safety is often inhibited by an incomplete understanding of the process by which individuals decide to protect themselves from harm (Becker JS, Paton D,Johnston DM, Ronan KR. Nat Hazards 64(1):107

Most of the Lisbon 18th century timber-framed masonry

Good performance of non-structural elements can be decisive in saving lives and costs when an earthquake strikes. The European project KnowRISK aims to educate and encourage households to take the necessary precautionary measures to protect people, houses, and contents. Preparedness and prevention act on community resilience. Within the KnowRISK project, the idea of a Practical Guide has been conceived suggesting seismic mitigation solutions for non-structural components to non-experts stakeholders. It is intended to guide people into the first steps of prevention in a straightforward manner, minimizing or avoiding injuries, damage, and long-term financial consequences. The novelty of the Guide belongs to his philosophy: a path through increasing challenges corresponds to a growing level of safety. The idea is that anyone can mitigate seismic risk in its own environment by adopting simple and low cost measures. The Practical Guide may contribute to increase risk awareness. This kind of initiatives if undertaken at larger scales may also enhance social resilience.

When one of the dimensions of a structural member is not clearly larger than the two orthogonal ones, engineers are usually compelled to simulate it with refined meshes of shell or solid finite elements that typically impose a large computational burden. The alternative use of classical beam theories, either based on Euler-Bernoulli or Timoshenko

A non

N/A

This text reflects the first of the four lectures that the author has presented at Udine, Italy, at CISM

Um dos principais problemas e interesses da engenharia sísmica é a caracterizaçãoda acção sísmica, envolvendo a estimativa da intensidade, conteúdo em frequência,duração e variabilidade espacial dos movimentos intensos do solo mais gravosos, emtermos dos seus efeitos nas estruturas, que pode ocorrer num local.O presente trabalho de investigação desenvolve e aplica a metodologia estocástica etécnicas de modelação de fonte

Os sismos são encarados frequentemente como desastres naturais inevitáveis. Todavia,deveriam ser considerados fenómenos naturais, cujos efeitos adversos podem ser minimizadoscaso se proceda a uma gestão efectiva do risco sísmico.O objectivo principal do presente trabalho de investigação é o de avaliar o risco sísmicoem Portugal Continental.Sendo um tema de natureza multidisciplinar, apresentam-se e discutem-se modelos deavaliação probabilística da perigosidade sísmica e sua desagregação, de vulnerabilidade efragilidade sísmicas de tipologias construtivas, de danos e de perdas económicas e humanas.Aplica-se a análise probabilística da perigosidade sísmica, e sua desagregação, aPortugal Continental, obtendo-se cenários modais capazes de reproduzir os níveis deperigosidade que os condicionam. Apresenta-se o inventário do parque habitacional e seushabitantes, descriminado por factores de vulnerabilidade, e classifica-se a sua vulnerabilidadesegundo os modelos de dano. Procede-se à actualização e aferição de uma metodologia parasimulação de cenários sísmicos, integrada num Sistema de Informação Geográfico. Avalia-seo risco sísmico, seguindo diversas abordagens, comparando-se os resultados com o risco deoutros países.Construiu-se assim uma ferramenta de avaliação de perdas devidas a sismos, queconstitui uma primeira contribuição para o desenvolvimento de um processo de gestão dorisco sísmico aplicado ao Continente Português.

O parque habitacional de Portugal Continental contém algumas tipologias construtivas deelevada vulnerabilidade sísmica em relação às quais urge actuar no sentido de reduzir o riscosísmico a elas associado. No projecto de investigação

O Laboratório Nacional de Engenharia Civil (LNEC) participa atualmente numa das sete Tarefas, doprojeto Europeu SHARE- Seismic Hazard Harmonization in Europe, mais precisamente na tarefa nº 2,intitulada Requisitos de engenharia e aplicações.O presente relatório de progresso descreve a participação do LNEC na sub-tarefa 2.5 - Cenários derisco sísmico para cidades Europeias selecionadas

N/A

No presente relatório pretendem-se apresentar e definir alguns das linhasorientadoras para a simulação do comportamento dinâmico de fluidos no interior deAmortecedores de Líquido Sintonizado (TLDs), de acordo com o proposto na literatura.O problema da modelação do comportamento de fluidos no interior deAmortecedores de Líquido Sintonizado, à semelhança do que acontece parareservatórios, é complexo, sendo apresentados os principais modelos matemáticos emecânicos utilizados na actualidade.Assim serão descritos modelos de comportamento adoptados no casoparticular dos Amortecedores de Líquido Sintonizado (TLDs) e modelos simplificadosde sistemas de 1 (SDOF) ou mais graus (MDOF) de liberdade com com os referidosdispositivos de mitigação de acções dinâmicas acopladosO presente relatório servirá, à semelhança dos relatórios Sistemas passivos,activos, híbridos e semi-activos: Estado dos conhecimentos, Actividade experimentalna área dos sistemas passivos para a protecção sísmica de estruturas: Experiência doNESDE e Modelos de comportamento dinâmico para fluidos no interior dereservatórios como uma das linhas orientadoras para o desenvolvimento dos trabalhospropostos no âmbito do PIP 2009-2012 do NESDE-DE Protecção Sísmica deEstruturas: Reabilitação, reforço e sistemas inteligentes.

N/A

N/A

N/A

This Report corresponds to Task 2 of the NEFOREEE (New Fields of Research inEarthquake Engineering Experimentation) Project and comprises the description of theLNEC triaxial seismic platform and a presentation of the experimental programdeveloped in the scope of this Project.It is presented a description of the facility and the 3D seismic table with graphicalsupport, drawings of sizing and photographs, as well as its control system. The maininstrumentation available at the NESDE laboratory and used for this test is alsoincluded in this report.The model tested is described as well as the sequence of tests and the correspondingobtained results. Finally a brief analysis of the results is made.

O presente relatório final do projecto USuET integra o trabalho já apresentado norelatório de progresso de Sousa & Afonso [2007], nomeadamente no que toca aoscapítulos 2, 3 e parte do capítulo 4 e, adicionalmente, descreve, em detalhe, asactividades desenvolvidas no projecto desde a data desse relatório (secção 4.2, ecapítulos 5 e 6). A parte da investigação conducente à actualização do Simulador deCenários Sísmicos para ambiente WebSIG, aplicado ao Arquipélago dos Açores, não seencontra descrita com o mesmo detalhe, neste relatório, pois enquadra-se na tese demestrado em Sistemas de Informação Geográfica de Afonso [2007], submetida àUniversidade Técnica de Lisboa. A versão definitiva desta tese, cuja discussão se prevêainda em 2008, será enviada oportunamente.

N/A

This report describes the second phase activity of the Portuguese group in the Precast Structures EC8 research project. The Portuguese group is composed by Laboratório Nacional de Engenharia Civil (LNEC) and the Civibral, S.A. precast company. This phase follows the shaking table tests of a 2 stories structure of the same precast system, which is commercialized by Civibral. More information about these tests can be found in the repor.The goal of the work presented in this document is to assess the seismic behaviour of column-foundation and beam-column connections from the same precast system. To help achieve this goal, 4 column-foundation and 10 beam-column connections were tested using quasi-static, monotonic and cyclic tests, which were made imposing displacements to the specimens. The column-foundation connections (CFC) can be categorized as socket connections and the beam-column connections (BCC) as dry connections using only mechanical devices to transmit forces between elements. All the specimens were supplied and mounted by Civibral personal.

Análise dos registos históricos de eventos climáticos e o seu impacto no setor da energia da AML, para identificar o grau em que este setor foi afetado por estímulos relacionados com o clima. Avaliação de capacidades adaptativas.

Análise da forma das edificações nas ações do vento

As condicionantes arquitetónicas e de urbanização na ventilação natural

Caracterização do vento. Ações sobre estruturas. Ensaios em túnel de vento