Publications

Vehicle trajectory descriptions are required for the development of driving behaviour models and in the calibration of several traffic simulation applications. In recent years, the progress in aerial sensing technologies and image processing algorithms allowed for easier collection of such detailed traffic datasets and multiple-object tracking based on constrained flow optimization has been shown to produce very satisfactory results, even in high density traffic situations. This method uses individual image features collected for each candidate vehicle as criteria in the optimization process. When dealing with poor image quality or low ground sampling distances, feature-based optimization may produce unreal trajectories.In this paper we extend the application of the k-shortest paths algorithm for multiple-object tracking to the motion-based optimization. A graph of possible connections between successive candidate positions was built using a first level criteria based on speeds. Dual graphs were built to account for acceleration-based and acceleration variation-based criteria. With this framework both longitudinal and lateral motion-based criteria are contemplated in the optimization process. The k-shortest disjoints paths algorithm was then used to determine the optimal set of trajectories (paths) on the constructed graph.The proposed algorithm was successfully applied to a vehicle positions dataset, collected through aerial remote sensing on a Portuguese suburban motorway. Besides the importance of a new trajectory dataset that will allow for the estimation of new behavioural models and the validation of existing ones, the motion-based multiple-vehicle tracking algorithm allowed for a fast and effective processing using a simple optimization formulation.

The objective of this paper is the analysis of the state-of-the-art in risk indicators and exposure data for safety performance assessment in Europe, in terms of data availability, collection methodologies and use. More specifically, the concepts of exposure and risk are explored, as well as the theoretical properties of various exposure measures used in road safety research (e.g. vehicle- and person-kilometres of travel, vehicle fleet, road length, driver population, time spent in traffic, etc.). Moreover, the existing methods for collecting disaggregate exposure data for risk estimates at national level are presented and assessed, including survey methods (e.g. travel surveys, traffic counts) and databases (e.g. national registers). A detailed analysis of the availability and quality of existing risk exposure data is also carried out. More specifically, the results of a questionnaire survey in the European countries are presented, with detailed information on exposure measures available, their possible disaggregations (i.e. variables and values), their conformity to standard definitions and the characteristics of their national collection methods. Finally, the potential of international risk comparisons is investigated, mainly through the International Data Files with exposure data (e.g. Eurostat, IRTAD, ECMT, UNECE, IRF, etc.). The results of this review confirm that comparing risk rates at international level may be a complex task, as the availability and quality of exposure estimates in European countries varies significantly. The lack of a common framework for the collection and exploitation of exposure data limits significantly the comparability of the national data. On the other hand, the International Data Files containing exposure data provide useful statistics and estimates in a systematic way and are currently the only sources allowing international comparisons of road safety performance under certain conditions.

The European Commission Transport White Paper

Road restraint systems are roadside structures that include safety barriers, crash cushions, terminal of barriers, the transitions among different road restraint systems, motorcyclist protection devices, etc. These systems are used to protect vehicle occupants from dangerous roadside elements and are a key issue in roadside safety.In Europe, safety barriers are currently designed for different performance levels using three main criteria: containment, impact severity and deformation of the barrier.The impact severity level is exclusively associated with injury risk to vehicle occupants and assumes that different severity levels correspond to different levels of injuries.From these observations, three questions emerge: what consequences can be expected for the passengers of an errant vehicle when it is contained by a safety barrier? Systems with different impact severity levels lead to diverse severity consequences? What are the benefits of using barriers with lower impact severity levels?To answer these questions this paper examines how the number of run-off-the-road crashes and victims

The economic appraisal of the external effects of transport options can provide important data for policy making. On the other hand, impacts of non-motorized modes have often been undervalued in comparison to other transport modes. To this end, assessing the potential health benefits of walking and cycling is being increasingly recognized as an important step to promote sustainable mobility policies.This paper is built upon the contracted study for the World Health Organization (WHO) on the economic appraisal of health benefits of walking and cycling investments for the City of Viana do Castelo. This Portuguese city which integrates the WHO European Healthy Cities Network provided a suitable policy context for the former application in Portugal of the WHO Health Economic Assessment Model (HEAT) for appraising the health benefits of non-motorized transport. The study comprised the evaluation of the following investment actions: a) Improvements of the urban public space for pedestrians; b) Planning future cycling infrastructures. This paper provides a discussion of the methodological challenges and key findings that have arisen from the WHO HEAT application study, when trying to answer the following questions:- If x people cycle (or walk) a distance of y kilometers on most days, what is the economic value of the correspondent health benefits? - What levels of uptake of cycling in the future are required for the cycling plan to be economic viable? - What health benefits are associated to a projected increase in the traffic levels of pedestrians (% increase from the reference level)? - Do health benefits of cycling (and walking) investments outweigh their costs?Results from this study make it able to add novel evidence for the Portuguese urban context on the potential health benefits of walking and cycling (maximum and mean annual health benefits), including the cost-benefit ratio indicators. These indicators are expected to be useful for policy makers and city officers involved in the promotion of sustainable mobility.

This paper summarizes the result of a study regarding the creation of tools that can be used in intervention methods in the planning and management of urban road networks in Portugal. The first tool relates the creation of a geocoded database of road accidents occurred in Lisbon between 2004 and 2007, which allowed the definition of digital maps, with the possibility of a wide range of consultations and crossing of information.The second tool concerns the development of models to estimate the frequency of accidents on urban networks, according to different desegregations: road element (intersections and segments); type of accident (accidents with and without pedestrians); and inclusion of explanatory variables related to the road environment. Several methods were used to assess the goodness of fit of the developed models, allowing more robust conclusions.This work aims to contribute to the scientific knowledge of accidents phenomenon in Portugal, with detailed and accurate information on the factors affecting its occurrence. This allows to explicitly include safety aspects in planning and road management tasks.

Mobility has an important impact on the overall functioning of cities and quality of life of citizens. On the other hand, motorized road traffic is associated with high levels of noise and air pollutant emissions along with congestion and other externalities, leading to considerable social and environmental costs and degradation of human health. Following the World Health Organization, physical inactivity is one of the leading risks in Europe, associated with nearly 1 million deaths per year. In Portugal around 69% of the adult population do not reach the minimum recommended level of physical activity and 31% were considered sufficiently and highly active. Therefore, more sustainable transport modes such as walking and cycling are envisaged. This paper is built upon the contracted work with the city of Viana do Castelo, located in the North of Portugal, conducted for the World Health Organization (WHO) by the University of Minho and LNEC. The work integrates a research roadmap (case study plan for the application of the Health Economic Assessment Tool) for the appraisal of health benefits of specific walking and cycling investments in the city. The work presented here focus on the former part of the study which involved joint team work with the city officers for defining the target policy scenarios for using the WHO Economic Assessment Tool, the exchange of experiences and practices with other European cities regarding the use of this tool for health benefits assessment, the characterization of the mobility patterns at the reference and alternative policy scenarios set for the cost-benefit analysis, the data collection plan and the expected impacts from the early consideration of health benefits of those non-motorized investments. Results from the evaluation study can help the City elected officials to demonstrate the health benefits of walking and cycling investments. Individuals

This article is a comprehensive Book review of the "Handbook of Transport Economics" (904 pages) by A. de Palma, R. Lindsey and E. Quinet, published in 2011 by Edward Elgar, Cheltenham, UK, ISBN: 978 1 84720203 1.

According to official statistics, a large percentage of crashes in Portugal are reported on urban roads. For instance, from 2004 to 2007, about 70% of all injury accidents and 43% of the fatalities occurred inside urban agglomerations. This important safety problem has also been observed on the urban network of Lisbon. Understanding this significant problem, the Government of the Portuguese Republic via its research grant agency

Single carriageway multilane roads are not, in general, a very safe type of road, mainly because of the high number of seriously injured victims in head-on collisions, when compared with dual carriageway multilane roads, with a median barrier.In this paper the results of a study on the effect of the application of several low cost engineering measures, aimed at road infrastructure correction and road safety improvement on a multilane road EN6), are presented. The study was developed by the National Laboratory of Civil Engineering (LNEC) for the Portuguese Road Administration and involved a comparison of selected aspects of motorized trafficbehaviour (traffic volumes and speeds) measured in several sections of EN6, as well as monitoring of road safety developments in the same road. The applied low cost engineering measures allowed a reductionof 10% in the expected annual number of personal injury accidents and a 70% decrease in the expected annual number of head-on collisions; the expected annual frequency of accidents involving killed and seriously injured persons was reduced by 26%.

The objective of this paper is to provide an empirical analysis of the influence of traffic noise has on the housing market. Traffic noise can be considered as an environmental externality from road transport system. As so, it affects the value that people are willing to pay for their houses. The value of this effect has already been studied by some authors, with Stated Preference-choice (SP-choice) methods, the hedonic pricing model, or others. The approach used in this study combines traditional methods, namely linear modelling techniques used for quantifying the effect on housing prices fluctuation, with newer methods as the spatial analysis associate d to Geographical Information Systems. There are obvious advantages by using GIS asadding spatial analytical capabilities in terms of increasing its functionality and meeting a demand for systems that do something beyond storing, retrieving and displaying large amounts of information. Thisstudy was developed for the city of Lisbon, Portugal. A geographical database was created combining information from the Census, on the housing characteristics, with renting and sales activities. This study applies two different techniques to identify the relation between traffic noise and the variation on the housing value in Lisbon, and aims to contribute to the scientific knowledge of housing market in Lisbon, with detailed and accurate information on the factors affecting its variation.

Neste artigo são apresentadas ferramentas destinadas ao planeamento e gestão das redes viárias que consideram explicitamente a segurança dos utentes vulneráveis. Essas ferramentas referem-se à criação de umabase de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, que permitiu a definição de mapas digitais, com possibilidade de uma grande diversidade de consultas; e ao desenvolvimento de modelos de estimativa de frequência de acidentes para redes urbanas, em função de características do elemento rodoviário, que incorporam dados de exposição de utentes vulneráveis de forma a melhorar a capacidade de estimativa da sinistralidade em redes urbanas.

Neste artigo é apresentado o estudo da avaliação do impacte sobre a segurança rodoviária da implementação de planos de segurança municipais. Este estudo foi desenvolvido num concelho piloto, que já possuía um plano municipal de segurança rodoviária. O seu objectivo centrou-se na avaliação do impacte do conjunto deintervenções de segurança rodoviária previstas para a rede viária do concelho piloto, com a finalidade de ajuizar acerca da viabilidade dos objectivos visados (em termos de indicadores quantitativos) e apoiar as decisões acerca da prioridade e intensidade a atribuir a cada intervenção programada.

estudos rodoviários. Os custos associados às contagens manuais ou automáticas inviabilizam muitas vezes a adaptação destas técnicas para a caracterização do tráfego, pelo que o recurso a estimativas do valor de Tráfego Médio Diário Anual (TMDA) reveste-se de particular interesse. Este trabalho apresenta uma metodologia expedita para estimar o TMDA na rede viária urbana da cidade de Lisboa através do estabelecimento de factores de ajustamento horários, diários e mensais, com base em dados de tráfego obtidos a partir de sistemas de gestãode tráfego disponíveis na cidade (GERTRUDE e SICIT).

Transport externalities are an important issue concerning both academic researchers and policy makers. One of the strategic goals of the EU Transport policy, as stated in the Transport White Paper

Integrated energy and urban mobility systems are key components for achieving cities

The Port of Sines

This paper aims to assess the impact of missing income data on estimates of the accuracy of marginal costs of aviation noise externalities, namely missing socio-economic attributes which are normally used to segment the sample for policy purposes. The experimental approach comprised a comparison between the coefficient parameter estimates obtained by fitting multinomial logit models using econometric software to both the complete data set and to data sets where several amounts of income data were replaced by missing values (5%, 10%, 25% and 50%). The latter data sets were analysed employing the two most common methods for missingness: the LD and the Multiple Imputation (MI) method using the expectation-maximization Bayesian bootstrapping algorithm within the Amelia II software program. The most appropriate number of imputations and the set of variables used to obtain the imputations with the MI approach are further investigated. The comparisons will be made through measures of accuracy of parameter estimates and of the combined model.

The knowledge of factors affecting accident occurrence has been a relevant research area for many decades due to enormous costs to society of road accidents. In Portugal, the developments in this area have focused mainly on inter-urban roads. Urban areas, which are characterized by high percentages of injury accidents (about 69% of the total between 2004 and 2008), require priority attention.This paper summarizes the result of a study which contributes to the improvement of road safety in urban areas, through the creation of tools that can be used in intervention methods in the planning and management of road networks.The first tool relates the creation of a geocoded database of road accident occurred in Lisbon between 2004 and 2007, which allowed the definition of digital maps, with the possibility of a wide range of consultations and crossing of information.The second tool concerns the development of models to estimate the frequency of accidents on urban networks, according to different disagregations: according to the road element: at intersections (three legs, four legs and roundabouts) and in segments; and according to the inclusion of explanatory variables related to the road environment: simplified (only with the exposure variables) and global (with all potential explanatory variables). These two tools can be used directly in the management of road infrastructure providing entities with expertise in road safety with accurate and detailed information about the factors involved in accidents in urban areas and their spatial distribution.

N/A

The application of low-cost road and traffic engineering measures (LCEM) is a cost-effective method for reducing accidents and their consequences. Empirical evidence shows that enforcement contributes to improvements on driving behaviour and road safety; however, results from reducing enforcement are seldom presented.In this paper a presentation is made of the impact LCEM and changes in enforcement intensity had on selected driving behaviour variables and safety levels on a 170 km single carriageway trunk road. LCEM were implemented on the road, followed a year later by the commitment of exceptionally intense and severe law enforcement and, after two years, its relaxation. The impacts of these safety interventions were evaluated through observational before-after studies. The expected number of injury accidents was reduced by 41% (less 75% fatalities), when considering the combined effect of LCEM and enforcement; suppression of strict enforcement was related to a 20% increase in the number of fatalities.

This case study refers to a successful application of an asphalt rubber wearing course in the frame ofthe rehabilitation of the pavement of the National Road EN 1 between Landiosa and Picoto.It concerns asphalt rubber manufactured by the wet process, using gap-graded aggregates. / O presente caso de estudo refere-se à aplicação bem sucedida de misturas com betume modificadocom borracha reciclada de pneus em camada de desgaste, no âmbito das obras de reabilitação dopavimento da estrada nacional EN 1, entre Landiosa e Picoto.Diz respeito, em particular, ao fabrico, por via húmida, de mistura betuminosa com borrachautilizando agregados com granulometria descontínua.

Manual de boas práticas para uma mobilidade sustentável, no âmbito do projecto nacional "Mobilidade Sustentável" coordenado pela Agência portuguesa do Ambiente (Vol. II). O projecto Mobilidade Sustentável envolveu uma rede de 15 centros de investigação/universidades do país, incluindo o LNEC.

Nesta publicação apresentam-se os aspectos relativos à concepção do projecto Mobilidade Sustentável, principais conclusões e recomendações.

O tempo decorrido (ou a distância percorrida) até à ocorrência de um evento, ou a duração do mesmo, podem ser analisados através de modelos de duração baseados em risco (hazard-based duration models), os quais têm sido amplamente utilizados em campos como a medicina, as ciências sociais e a engenharia industrial. Contudo, são relativamente escassos os estudos que aplicaram modelos de duração à engenharia de transportes.Este capítulo inclui dois exemplos de aplicação de modelos de duração à investigação em engenharia de transportes. O primeiro diz respeito às distâncias percorridas por veículos descontrolados em despistes ocorridos na Carolina do Norte (E.U.A.). O segundo refere-se ao tempo decorrido até à transferência modal nas deslocações para a escola de um conjunto de alunos de 162 turmas de 51 escolas do ensino básico em Portugal.

Em Portugal, a investigação sobre o conhecimento dos fatores que afetam a probabilidade de ocorrência de acidentes tem-se centrado essencialmente nas estradas interurbanas. No entanto, as zonas urbanas, onde ocorrem elevadas percentagens de acidentes corporais requerem uma atenção prioritária. Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária em meio urbano, através da criação de ferramentas que podem ser utilizadas em métodos de intervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nas fases de planeamento e gestão das redes viárias. Uma das referidas ferramentas resultou da elaboração de modelos de estimativa de frequência de acidentes para redes urbanas, segundo diversas desagregações, em função de características do elemento rodoviário: em intersecções (três ramos, quatro ramos e rotundas) e em segmentos; segundo o tipo de acidente (atropelamentos e restantes acidentes com vítimas); e segundo a inclusão de variáveis explicativas relacionadas com o ambiente rodoviário: simplificados (apenas com as variáveis de exposição) e globais (com todas as potenciais variáveis explicativas). O desenvolvimento destes modelos foi apoiado numa base de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, com a qual foi possível explorar os dados de sinistralidade na área geográfica em análise. Estas ferramentas podem ser usadas diretamente na gestão das infraestruturas rodoviárias da cidade de Lisboa e, após pequenas adaptações, estendidas a outros municípios, dotando as respetivas entidades competentes em matéria de segurança rodoviária com informação rigorosa e detalhada sobre os fatores intervenientes na ocorrência de acidentes em meio urbano e a respetiva distribuição espacial.

Os dados discretos ou em escala nominal desempenham um papel fundamental nos transportes porque muitas análises de políticas lidam com estes tipos de dados. Exemplos de dados discretos nos transportes incluem o modo de transporte (automóvel, autocarro, comboio), o tipo ou categoria de veículo e o tipo de acidente rodoviário (despistes, colisões frontais, colisões traseiras, etc.). O conhecimento do efeito das diferentes intervenções de segurança rodoviária na redução da gravidade das lesões resultantes de acidentes rodoviários exige uma avaliação empírica detalhada das interações, reconhecidamente complexas, entre veículos, estrada e fatores humanos.Os avanços mais recentes nas metodologias estatísticas aplicadas a dados discretos sobre sinistralidade rodoviária permitiram o desenvolvimento de modelos sofisticados capazes de serem usados para determinar com rigor a influência dos fatores acima referidos nos níveis de gravidade das lesões resultantes dos acidentes rodoviários.Neste contexto, a aplicação de modelos de resultado discreto permite identificar um conjunto de fatores, relacionados com a envolvente rodoviária, que são estatisticamente relacionáveis com a gravidade das lesões dos utentes envolvidos em acidentes rodoviários, permitindo aperfeiçoar a conceção e o dimensionamento das estradas, bem como orientar políticas conducentes à melhoria da segurança rodoviária. Este capítulo inclui um exemplo de aplicação do modelo logit multinomial usando a gravidade das lesões no condutor como variável de resposta.

Spatial organization in cities has often given a special attention to the requirements of motorized vehicles, neglecting pedestrians and cyclists

The importance of sustainable urban mobility plans is widely recognized by local and regional authorities across Europe. Technological innovation opportunities such as those offered by current and future ICT can contribute for cities to advance towards sustainable mobility and accessibility for inclusive public spaces.This article is built on an innovative living lab experience of the Intermunicipal Community of the Algarve (AMAL), the regional transport authority, scientifically supported by the LNEC, in Portugal, that comprised the development of the designated

O conhecimento dos factores que afectam a probabilidade de ocorrência de um acidente éuma área de investigação relevante de há muitas décadas devido aos enormes custos para asociedade dos acidentes rodoviários. Em Portugal, os desenvolvimentos nesta matériacentraram-se essencialmente nas estradas inter-urbanas. No entanto, as zonas urbanas,caracterizadas por elevadas percentagens de acidentes corporais (cerca de 69% do total entre2004 e 2008), requerem uma atenção prioritária.Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária emmeio urbano, através da criação de ferramentas que podem ser utilizadas em métodos deintervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nasfases de planeamento e gestão das redes viárias.A primeira ferramenta correspondeu à criação de uma base de dados georreferenciada dosacidentes rodoviários ocorridos na cidade de Lisboa entre 2004 e 2007, que permitiu adefinição de mapas digitais, com possibilidade de uma grande diversidade de consultas e decruzamentos de informação.A segunda ferramenta refere-se à elaboração de modelos de estimativa de frequência deacidentes para redes urbanas, segundo diversas desagregações: segundo o elementorodoviário: em intersecções (intersecção de três ramos, intersecção de quatro ramos erotundas) e em segmentos; segundo o tipo de acidente: atropelamentos e restantes acidentescom vítimas; e segundo a inclusão de variáveis explicativas relacionadas com o ambienterodoviário: simplificado (apenas com as variáveis de exposição) e global (com todas aspotenciais variáveis explicativas). Foi considerada a incorporação de dados de exposiçãorelativos aos utentes vulneráveis por forma a melhorar a capacidade de estimativa dasinistralidade em redes urbanas.Estas duas ferramentas podem ser usadas directamente na gestão de infra-estruturas, dotandoas entidades com competência em matéria de segurança rodoviária com informação rigorosa edetalhada sobre os factores intervenientes na ocorrência de acidentes em meio urbano erespectiva distribuição espacial.

No período de 1988 a 1993, ocorreram anualmente nas estradas rurais de uma faixa de rodagem e dois sentidos da Rede Rodoviária Nacional de Portugal, em média, cerca de 1471 acidentes corporais anuais em curva fora de cruzamentos. Estes acidentes constituem cerca de 33% dos acidentes corporais fora de cruzamentos participados na referida rede.O objectivo do presente trabalho é contribuir para o conhecimento da influência da estrada na ocorrência de acidentes e para o desenvolvimento de um método para avaliação de traçados rodoviários do ponto de vista da segurança.Foram realizadas in situ campanhas de recolha de dados sobre as distribuições de velocidades dos condutores, os quais foram relacionados com as características geométricas das estradas e com a respectiva sinistralidade. Foram desenvolvidos modelos para estimativa de perfis de velocidade de circulação livre, bem como modelos para estimativa da frequência de acidentes, em estradas de uma faixa de rodagem e dois sentidos, adaptados às condições de tráfego nacionais. Os referidos modelos foram integrados num procedimento para detectar inconsistências de velocidade em especial associadas à ocorrência de acidentes em curva, o qual foi usado para fundamentar uma proposta de quantificação de critérios de homogeneidade de traçado, adaptados à realidade do sistema de tráfego rodoviário português.

O presente relatório refere-se à actividade em curso LNEC no âmbito da investigaçãoprogramada (2005-2008) sobre a segurança rodoviária em meio urbano.Neste documento relatam-se os resultados da aplicação de modelos de estimativa deacidentes, desenvolvidos internacionalmente, às intersecções da Av. do Brasil e da Av.Rio de Janeiro, em Lisboa, de forma a avaliar o ajuste das estimativas obtidas nocontexto nacional.São apresentadas as conclusões relativas à aplicabilidade dos modelos analisados. Acomparação entre as frequências de acidentes observadas e as estimadas permitiuconstatar uma desadequação dos modelos estudados ao contexto rodoviário urbanode Lisboa, uma vez que os valores estimados foram bastante superiores aosobservados.

O presente relatório tem como objectivo descrever o estado da prática actual no que se refere àanálise de risco em túneis rodoviários, designadamente no contexto europeu. Pretendeu-seigualmente apresentar o software de avaliação de riscos no transporte de mercadorias perigosas DGQRAM(Dangerous Goods - Quantitative Risk Assessment Model), desenvolvido pela ComissãoTécnica C3.3 do PIARC (World Road Association) em conjunto com a OCDE (Organização para aCooperação e Desenvolvimento Económico), e avaliar a viabilidade da sua aplicação em Portugal.É apresentado o contexto legal e analisado o enquadramento técnico-científico em que se inserem asanálises de risco, designadamente em túneis rodoviários. Descreve-se pormenorizadamente oprograma DG-QRAM, o respectivo funcionamento

Safety performance indicators (SPIs) can be used to improve our understanding of the causes of accidents, and they can be used to monitor policy interventions. In that sense, they are one of the elements of a safety management system. SafetyNet Work Package 3 deals with these indicators. On the basis of the ETSC report 'Transport Safety Performance Indicators' (2001) [1], seven domains for SPIs have been defined: 1. Alcohol and drug-use 2. Speeds 3. Protection systems 4. Daytime running lights 5. Vehicles (passive safety) 6. Roads 7. Trauma management In Work Package 3, seven tasks are defined that work on each of the respective SPI domains. Their findings are communicated through reports, presentations, conferences and a website. This deliverable deals with the communication of findings through the European Road Safety Observatory website (http://www.erso.eu). The report contains those web texts, published on the website, that are adapted from the contents of Deliverable 3.1 from SafetyNet WP3, the State-of-the-art report. The web text focuses on the explanation of the concept of SPIs, and gives background details of two SPI areas: alcohol & drugs, and speeds. In the future new web texts related to the subject of Road Safety Performance Indicators will be added to the ERSO website.

This report compares the safety performance of 27 European countries

This document provides details about the theory behind the development of Safety Performance Indicators (SPIs) in seven major areas which are central to the fields of activity in road safety in Europe. The fields of activity were selected as a result of reviews of national road safety plans in many of the EU countries and around the world and are considered the central themes of activity in road safety, necessary to bring about a significant improvement in road safety in the EU countries. Within each field SPIs were developed which are directly related to that field of activity, can be quantitatively measured, can provide the basis for the assessment of the level of road safety in each country and can serve as an indicator to describe the level of activity in that field and country and can provide a yardstick for comparison. Comparisons can be before and after certain actions are taken or can be comparisons between countries. As stated above, this document deals with the theory behind the development of each of the seven SPIs. It provides the rationale behind their development, the proofs for their relevance in the specific fields and the existing limitations that led to the adoption of the specific SPIs. The document provides also some recommendations for the possible improvements required to obtain better SPIs. Two companion documents are also being prepared. One is a manual which provides details on the procedures necessary to collects the required data for the development of each SPI in each country. The second document provides results on the data collected so far for each of the 25 EU countries and the SPIs developed so far, based on the data submitted by each of the countries. It can be seen that a lot of work still has to be done, both in collecting the necessary data and in improving the SPIs, once better and more detailed data becomes available.

Work Package 3 of SafetyNet deals with Safety Performance Indicators. They measure the operational conditions of the road traffic system. Work Package 3 deals with seven topics: alcohol and drug use; speeds; protective systems; daytime running lights; vehicles; road; trauma management. This deliverable concerns the contribution of Work Package 3 to the first SafetyNet conference, which was held in Prague on May 10 and 11, 2006. Each topic prepared a poster with an overview of the state-of-play. In this document, these posters are assembled. Each topic has a preferred indicator, which can be used for measuring safety performance across countries. This indicator is accompanied by requirements that should be met by the data, in order to be able to calculate the indicator. For most tasks, values could be calculated for the indicators by using the available data. Data are not available for all countries and/or all topics.

This report is one of three area reports that examine the road safety performance of the nine countries participating in the SUNflowerplus project. This area report compares the road safety situation of the Southern countries of Greece, Portugal and Spain (including a separate analysis for the Spanish autonomous region of Catalonia).The aim of this report is to identify the major road traffic risk differences between Southern European countries based upon a comparative approach initially applied by the SUN (Sweden, United Kingdom & the Netherlands) countries, and focussed on the analysis of fatalities by users of different modes of road transport.The method for comparing the Southern countries has been developed from that of the original SUNflower report (SWOV, 2002), and is reflected in the organisation of the chapters:- Description of national policy and plans. - Description of the transport context.- Fatalities by road user mode and collisions between modes.- Case studies for: drink-driving, seat belts, young drivers, speed management, pedestrians, mopeds and motorcycles.In some cases (for example, young drivers and pedestrians), the indicators used to compare the situation in the Southern countries are common to those reported in the SUN and Central areas. In other cases (for example, speed management) the situations are very different and there is less scope for comparison.SUNflower+6 compares statistics for road fatalities in terms of fatalities within 30 days of the accident. In all three Southern countries, the figures are based on national factors applied to police data recording deaths within 24 hours. In producing indicators, various efforts to improve data systems have been detected. In general, a greater use of information and communications technologies could improve the process of data registration as well as facilitating improved analysis.All three countries (and the autonomous region of Catalonia) have published a plan covering a period of three or more years (including the current year of 2005) that sets quantified targets for a reduction in the number of road accident fatalities. Such progress in road safety planning is a relatively new aspect of road safety activity in the Southern countries studied. The targeted reductions for Portugal are even more ambitious than those of the EU White Policy paper proposing a halving in road deaths by 2010, whilst those for Spain and Catalonia are in line with the European overall projection and those for Greece are more modest.

GeneralRoad safety can be assessed in terms of the social costs of crashes and injuries. However, simply counting crashes or injuries is an imperfect indicator of the level of road safety. When crashes occur it is the

The SUNflower+6 project is based on a comparative study regarding road safety in nine countries and one autonomous region from the EU. These countries are divided into three groups: -

Ce document est la traduction en langue française du manuel destiné à appuyer la mise en oeuvre d'audits de sécurité routière au projet d

O presente documento constitui o primeiro relatório referente à actividadedesenvolvida pelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdadede Ciências e Tecnologias da Universidade de Coimbra (FCT/UC) no âmbito doprojecto IRUMS

O presente documento constitui o quinto relatório referente à actividade desenvolvidapelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdade de Ciências eTecnologias da Universidade de Coimbra (FCT/UC) no âmbito do projecto IRUMS

The present document describes prediction models for accident, fatalities,serious injuries and killed and seriously injured victims, adjusted to bidirectionaldata of Portuguese motorway sections. The study was developed at LaboratórioNacional de Engenharia Civil (LNEC) in the scope of Workpackage 2 - SafetyImpact Assessment and Accident Prediction Model of the RIPCORD-ISERESTproject, carried out under the 6th European Framework Program. It covers theissues related to modeling accidents using the Negative Binomial modelregressions as well as detailed diagnostic checks of the models obtained.The data used were collected over a five year period, ranging from 1999 to2003. Several explanatory variables were measured concerning exposure,number of lanes, presence of an additional lane, lane widths, type and widths ofthe road

The main objective of the project was the benchmarking of road safety performances and developments of ten Latin American countries.The comparison allowed to identify the similarities and differences between countries, not only on the number of crashes and casualties, but also on the factors, circumstances and events that influence the risk of a crash and the severity of its outcome. The analysis was performed in the following areas

Neste relatório é proposta a estrutura organizacional para realização das contagens tendentes ao recenseamento de tráfego rodoviário na rede de estradas interubanas da Argélia, incluindo o dimensionamento do parque de equipamento de contagem a usar, sua configuração (cntagens permanentes e temporárias), bem como a avaliação dos prazos de realização, em função da dimensão das equipas encarregadas da colocação e exploração dos equipamentos nos trechos da rede rodoviária.

The European Conference of Transport Research Institutes (ECTRI) is an international non

The research reported in this paper is part of the R&D project COST-TRENDs, funded by the Portuguese Foundation for Science and Technology. It presents a strategic assessment study of the hinterland connections centred in the Port of Sines, in Portugal, that integrates the core network corridor of the Trans-European Transport Network (TEN-T) designated as the Atlantic corridor. The study comprised the analysis of trends of maritime freight costs until 2020 and the assessment of alternative intermodal freight transport options to reduce costs along the multimodal transport chains. The options evaluated focused in the Iberian section of the Atlantic corridor and included the combination of maritime-short sea shipping, maritime-rail, maritime-road and, also, rail-air modes. The study estimated several key performance indicators for each option which aim to provide useful inputs to transport policy.

The literature shows that the development of the railway system in most European countries had a key role both in the evolution of urban systems and regional dynamics. On the other hand, it can be said that railway stations might act as important drivers for promoting sustainable land-use changes, namely of node and place functions which can be consistently balanced.The future Portuguese High-Speed Railway (HSR) network is considered as a major strategic transport scheme at both the Iberian and national levels. Its first stage comprises three routes. Of these, one links the Lisbon Metropolitan Area with the Spanish border of Badajoz, being an integral part of the HSR between both Iberian capitals, whereas the other two form the Atlantic Axis, encompassing a system of cities ranging from Lisbon to Porto, an from the latter point to Braga, Vigo and Coruña, concentrating nearly 80% of the whole Portuguese population, and serving an area generating about 90% of Portugal