Papers
Info
Wave overtopping and flood risk assessment in harbours: a case study of the port of Las Nieves, Gran Canaria
This paper presents the analysis of the probability of occurrence of wave overtopping events as well as its consequences at the Port of Las Nieves in Agaete, Gran Canaria Island, with the evaluation of the resulting level of flood risk. The study has been conducted using a third-generation spectral wave model to reproduce wave propagation from deep to shallow water depths considering the associated mean sea level, and a neural network-based model, for estimating mean wave overtopping discharges. Results reveal that overtopping in the initial sections of the port, located in the port access area, is substantially higher than that associated with the cross-sections of the main body of the breakwater, so that control actions to reduce overtopping are required due to the important socioeconomic implications regarding the infrastructure inoperability.
Year: 2017
Number Pages:
1-10pp.
Author(s): Santana-Ceballos, J.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Rodríguez, G.
: WIT Transactions on the Built Environment
Editor: WIT Press
Volume:
Vol. 170.
Keywords: Port of Las Nieves; Neural networks; Flood risk; Wave overtopping
Info
Avaliação comparativa de ferramentas neuronais. Aplicação à Praia da Vitória, Terceira, Açores
Neste trabalho, descreve-se a aplicação ao porto e baía da Praia da Vitória, na ilha Terceira, Açores, Portugal, da metodologia de avaliação do risco de galgamentos em estruturas marítimas em desenvolvimento no LNEC, considerando duas ferramentas neuronais para cálculo dos galgamentos baseadas em resultados da aplicação de redes neuronais artificiais, nomeadamente a ferramenta NN_Overtopping2 e a Overtopping Predictor v1.1. Em particular, avalia-se comparativamente quais as implicações que a utilização de cada uma destas ferramentas tem em termos de número de eventos de galgamento e magnitude dos caudais médios galgados, bem como consequente grau de risco, para as 9 secções-tipo de estruturas marítimas estudadas no porto e baía da Praia da Vitória. O período de estudo é de 5 anos (2008 a 2012).
Year: 2016
Number Pages:
49-68pp.
Author(s): Reis, R.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.; Santos, J. A.
: Vetor
Editor: FURG
Volume:
Volume 26, n. 1.
Keywords: Galgamentos; Risco; Praia da Vitória; Porto; Overtopping predictor V1.1; NN_Overtopping2; Ferramentas neuronais
Info
Galgamento de uma estrutura portuária protegida por um quebra-mar submerso: o caso do Porto de Leixões, Portugal
O galgamento de estruturas portuárias consiste na passagem de água sobre o coroamento da estrutura pela ação da agitação marítima e é um dos fenómenos com maior impacto na integridade da estrutura e na segurança da zona por ela protegida. O principal objetivo deste trabalho é estudar o galgamento num quebra-mar de taludes, com um importante muro cortina, protegido por um quebra-mar submerso. Em particular, pretende-se otimizar a geometria do quebra-mar submerso situado a barlamar do quebra-mar de taludes, no qual se pretende diminuir o galgamento.A estrutura marítima em estudo é o molhe norte do Porto de Leixões, em frente ao qual já existe um quebra-mar submerso na zona da cabeça. Pretende-se estender a zona do molhe protegida pelo quebra-mar submerso e, para tal, é necessário estudar qual a melhor geometria e posição a adotar para este quebra-mar.Para estudar a influência da geometria e da posição do quebra-mar submerso no galgamento do molhe norte, utilizou-se o modelo numérico IH2VOF. Simularam-se três condições de agitação regular, que diferem somente na altura de onda, e sete geometrias do quebra-mar submerso, que diferem da configuração original (a existente atualmente) em três características: a distância entre o quebra-mar submerso e o molhe, a cota de coroamento do quebra-mar submerso e a sua largura de coroamento.Com a realização deste estudo, para as condições de agitação consideradas, verificou-se que as características com maior impacto na redução do galgamento no molhe norte do Porto de Leixões são: o aumento da distância entre o quebra-mar submerso e o molhe e o aumento da cota de coroamento do quebra-mar submerso. O caudal médio de galgamento para as condições de agitação em estudo reduziu-se de um valor máximo de 0,71 l/s/m para a configuração original para 0,02 l/s/m em duas das novas configurações analisadas, ou seja, uma redução de 97% face à configuração original.
Year: 2016
Number Pages:
121-131pp.
Author(s): Bairrão, M.; Neves, M. G.; Reis, M. T.; Taveira-Pinto, F.
: Revista de Gestão Costeira Integrada / Journal of Integrated Coastal Zone Management
Editor: APRH
Volume:
16 (2).
Keywords: Modelação física; IH2VOF; Modelação numérica
Info
Improving the aerodynamic performance of Vila-Real Bridge deck-section
The susceptibility of bridge decks to vortex induced oscillations can b eaddressed through wind-tunnel testing. This paper considers the case of the Vila-Real Bridge, in the north of Portugal, which has the highest deck above ground (230m), among concrete-deck bridges cable-stayed in the central plane. It has a single-cell rectangular box girder with a wide top flange supported by regularly spaced inclined struts. Aeroelastic studies of this precise type of deck seem nonexistent in the literature.Results of sectional model tests are presented for a selection of three distinct angles of attack and three deck configurations, including a solution, alternative to the usual mitigation measures, that solved the susceptibility to vortex induced vibration of the deck and that has no relevant additional design or building costs.With the proposed approach, bridge designers may be able to relegate the use of sections with high aerodynamic performance
Year: 2016
Number Pages:
72-83pp.
Author(s): Vaz, D.; Almeida , R.A.S.B; Didier, E.; Urgueira, A.P.V.; Borges, A.R.J.
: Journal of Wind Engineering and Industrial Aerodynamics
Editor: Elsevier
Volume:
Volume 156.
Keywords: Box girder; Wind tunnel testing; Sectional model; Oscillations mitigation; Bridge aeroelasticity
Info
Mechanics of the scouring and sinking of submerged structures in a mobile bed: A physical model study
Wave-induced flow velocity and turbulence may cause scouring in the seabed around coastal structures depending on the wave climate and tidal water depth. A 3-D physical modelling study was conducted to investigate the possible causes of the sinking of two submerged coastal structures on the Santa Maria del Mar (SMM) beach, Spain. The experimental investigation was conducted by employing a Froude similarity law with a geometric scale of 1:20, and the submerged modular structure was subjected to different wave climates and tidal water levels. The combinations of the significant wave height and peak period were chosen from in-situ real wave conditions thatwere monitored during the sinking of the prototype structures. Linking and unlinking conditions for the modules in the structure were investigated in this study. The results show that the modules sank to approximately 48% of their height at the end of the tests with storm waves and semi-linking conditions of low water depth. Most of the experimental results were compatible with the prototype monitoring results. Tests with proper linking among themodules and testswith an appropriate gravel foundation resulted in a sustainable solution because they presented much less or almost no scouring and sinking.
Year: 2016
Number Pages:
50
Author(s): Khan-Mozahedy, A.B.M.; Muñoz-Perez, J.; Neves, M. G.; Sancho, F. E.; Cavique, R.
: Coastal Engineering
Editor: Elsevier
Volume:
110.
Keywords: Gravel bed; Sandy bed; Pumice stone; Submerged modular structure; Sinking; Scour
Info
Numerical simulation of flow interaction between stationary and downstream elastically mounted cylinders in tandem at low Reynolds numbers
Despite the simplicity of the geometry of the circular cylinders, the uniform flow around them is complex,since it may induce unsteady forces on structures associated with vortex shedding. This paper describes the study of two circular cylinders (the downstream one is elastically mounted in transversal direction) in tandem arrangement subject to bi-dimensional uniform laminar flows at low Reynolds numbers. The academic numerical model Ifeinco, which is based on the finite element method and uses a partitioned scheme that considers two-way interaction of fluid flow and structure, has been employed to the analysis.Firstly, both stationary cylinders in tandem arrangement for Re = 100 are analysed for center to center distance between the cylinders, L/D, from 1.5 to 6.0. Results of lift and drag coefficients and Strouhal number are compared with other numerical results and good agreement is found. Secondly, numerical results for L/D = 5.25, considering downstream elastically mounted cylinder, are analysed for Reynolds numbers ranging from 100 to 140. It shows that the resonance occurs for Reynolds numbers between 115 and 120 and the maximum dimensionless amplitude of oscillation is 0.721 for Re = 118.
Year: 2016
Number Pages:
11p.
Author(s): Teixeira, P.; Didier, E.
: Journal of the Brazilian Society of Mechanical Sciences and Engineering
Editor: Springer
Keywords: Wake interference; Tandem arrangement; Circular cylinders; Flow-induced vibration; Finite element method
Info
Numerical simulation of wave interacting with a submerged cylinder using a 2D RANS model
A 2D RANS numerical model (IH2VOF) is employed to study wave interacting with a circular cylinder with a diameter of 0.02 m in a water depth of 0.27 m, with a wave period of 1.08 s and a wave height of 0.047 m. The influence of the wall proximity on the forces is analyzed for ratiosbetween the pipe (i.e. circular cylinder) distance from the bottom and the pipe diameter varying from 0.04 to 1.5. Results of lift forces and streamlines are compared with the experimental results of Jarno-Druaux et al. (1995) and good agreement is found. Lift, drag and inertia coefficients are also compared with experimental results and the same trend of fundamental quantities with the gap between the cylinder and the bottom was obtained with the model giving slightly larger values. Finally, the influence of the method to estimate the drag and inertia coefficients in the force calculated using Morison equation is analyzed and Morison method shows the better agreement.
Year: 2016
Number Pages:
1
Author(s): Inverno, J.; Neves, M. G.; Didier, E.; Lara, J. L.
: Journal of Hydro-environment Research
Editor: Elsevier
Volume:
12.
Keywords: Hydrodynamic forces; Submerge circular cylinder; Drag and inertia coefficients; RANS modeling
Info
Performance of a fuzzy ARTMAP artificial neural network in characterizing the wave regime at the Port of Sines (Portugal)
Techniques based on artificial neural networks (ANNs) have been increasingly applied to predict emergency situations, such as extreme wave conditions, wave overtopping or flooding, and damage to maritime structures, in coastal and port areas. In this work, a fuzzy adaptive resonance theory with mapping (FAM) ANN was trained to predict the wave regime both inside and at the entrance to the Port of Sines, one of the major trade and economic gateways of the Iberian Peninsula, located on the Portuguese west coast. In situ measurements using pressure sensors, wave buoy data, and results from two numerical wave propagation models
Year: 2016
Number Pages:
1362
Author(s): Santos, F.; Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Lotufo, A.; Neves, D. R.; Poseiro, P.; Maciel, G.
: Journal of Coastal Research
Editor: Coastal Education and Research Foundation
Volume:
Volume 32, Issue 6.
Keywords: Artificial neural network (ANN) training and validation; In situ measurements; Wave buoy data; Numerical wave propagation modeling
Info
Photogrammetric analysis of rubble mound breakwaters scale model tests
The main goal of this paper is to develop a photogrammetric method in order to obtain arobust tool for damage assessment and quantification of rubble-mound armour layers during physicalscale model tests. With the present work, an innovative approach based on a reduced number ofdigital photos is proposed to support the identification of affected areas. This work considers twosimple digital photographs recording the instants before and after the completion of the physicaltest. Mathematical techniques were considered in the development of the procedures, enabling thetracking of image differences between photos. The procedures were developed using an open-sourceapplication, Scilab, nevertheless they are not platform dependent. The procedures developed enablethe location and identity of eroded areas in the breakwater armour layer, as well as the possibilityof quantifying them. This ability is confirmed through the calculation of correlation coefficients ineach step of the search for the more damaged area. It is also possible to make an assessment of themovement of armour layer units.
Year: 2016
Number Pages:
541
Author(s): Lemos, R.; Loja, M.A.R.; Rodrigues, J.; Rodrigues, J.A.S.
: AIMS Environmental Science
Editor: AIMS Press
Volume:
3(3).
Keywords: Scale model tests; Pphotogrammetric analysis; Rubble-mound breakwaters
Info
Smoothed particle hydrodynamics numerical model for modelling an oscillating water chamber
This paper presents theapplicatio nand thevalidation of the SPH numerical model SPHyCE, based on astandard Smoothed Particle Hydrodynamics formulation, for modeling anonshore oscillating waterchamber, comparing results of amplification factor and phase lag with those obtained by a mesh-basedRANS model .Firstly, ananalysis of the results for differentre solutions (i.e.particle dimension) showedthe independence of results with refinement. Secondly, the amplification factor of mean free surfaceelevation inside th eoscillating water chamber and the phase lag between time series of free surfaceelevation outside and inside the water chamber were analysed. A good agreement was achieved between the mesh free SPHyCE model and the mesh-based RANS model. SPHyCE model was finally applied to analyse the hydrodynamic fluid flow inside and outside the water chamber and to quantify the forces onthe vertical wall and the amplification factor for different incident wave heights for a rough sea state with complex wave breaking, impact loads and overtopping, contributing to the future applications ofSPH models for development and studies of OWC devices.
Year: 2016
Number Pages:
397
Author(s): Didier, E.; Neves, D. R.; Teixeira, P.; Dias, J.; Neves, M. G.
: Ocean Engineering
Editor: Elsevier
Volume:
123.
Keywords: Coastal engineering; Hydrodynamic forces; Wave
|
Comunicação
Info
Estudos de agitação e ressonância no porto de Leixões
Com vista a otimizar a geometria do prolongamento do quebra-mar exterior do Porto de Leixões, bem como avaliar os impactes desse prolongamento nas condições de agitação na praia de Matosinhos, efetuou-se a caraterização da agitação marítima na zona de estudo, considerando várias soluções alternativas para o quebra-mar. A presente comunicação descreve os estudos realizados em modelo numérico para: a) o estabelecimento de regimes de agitação no exterior do porto, b) a caracterização da agitação e ressonância no interior do porto; c) a avaliação dos impactes do prolongamento do quebra-mar nas condições de agitação da praia de Matosinhos.
Year: 2018
Number Pages:
474-477pp.
Author(s): Fortes, C. J. E. M.; Neves, M. G.; Pinheiro, L.; Capitão, R.; Lopes, H.
Editor: Instituto Hidrográfico
Keywords: Modelação numérica; Ressonância; Agitação marítima; Porto de Leixões
Info
Evolução do dano num quebra-mar de taludes em cenários de alterações climáticas
No âmbito do projeto HYDRALAB+ (H2020-INFRAIA-2014-2015), foi realizado no LNEC um conjunto de ensaios em modelo físico bidimensional (2D) de um perfil de um quebra-mar de talude em enrocamento, construído à escala geométrica 1:30, para diferentes condições de agitação marítima e níveis de maré correspondentes a cenários de alterações climáticas. Estas experiências tinham como objetivo analisar o dano, o espraiamento e o galgamento, nesses cenários.Em paralelo, na Faculdade de Engenharia da Universidade do Porto (FEUP), e em colaboração com Deltares, NL, foram realizados testes com a mesma configuração do quebra-mar, mas utilizando um modelo físico tridimensional (3D), à escala geométrica 1:35. Os resultados obtidos permitiram analisar a evolução do dano no manto resistente do quebra-mar (talude anterior, talude posterior e cabeça), assim como o galgamento, para condições de teste com e sem sobrelevação do nível médio da água do mar, considerando ou não a reconstrução do talude do quebramar entre testes consecutivos de uma mesma série de testes. Foram também realizados testes com ondas multidirecionais.O presente trabalho incide sobre a análise da evolução do dano para as diferentes sequências de tempestade em cenários de alterações climáticas. O dano é avaliado com base no tradicional método de contagem de blocos removidos e ainda com base no parâmetro adimensional do dano, S recorrendo a técnicas estereofotogramétricas.Em termos gerais, concluiu-se que o dano era mais elevado na proximidade do nível de repouso da água e que aumentava com a altura de onda significativa. Os danos foram, em geral, menores nos testes com ondas multidirecionais. Observaram-se, ainda, diferenças significativas entre os testes com danos cumulativos e com reconstrução do quebra-mar após cada teste. Nos ensaios realizados no LNEC com aumento do nível médio do mar e alternância entre dois níveis de maré, verificou-se um ligeiro aumento do dano devido ao aumento faixa onde ocorre erosão do perfil.
Year: 2018
Number Pages:
16p.
Author(s): Lemos, R.; Fortes, C. J. E. M.; Mendonça, A. C.; Rosa-Santos, P.; Taveira-Pinto, F.; Almeida, E.; Hofland, B.
Editor: APRH
Keywords: Modelação física; Alterações climáticas; Evolução do dano
Info
Experimental measurments of movements and mooring forces of a ship under wave action
This paper presents a series of tests on a reduced physical model to reproduce the behavior of a moored oil tanker. The measurement techniques used and all the instrumentation are presented. Data analysis techniques are also presented. The objective of the tests is the characterization of the incident marine agitation and the response of the ship, including the movements according to 6 degrees of freedom and the forces in the mooring system.The tests were carried out in one of the tanks of the Marine Hydraulic Pavilion of the National Laboratory of Civil Engineering, using for the generation of marine agitation a batter capable of generating irregular waves.The vessel used is a scale model of the "Esso Osaka" tanker with a length of 3.43 m, a width of 0.53 m and a maximum draft of 0.23 m and is lying in terminal A of the Port of Leixões. The entire port area was built at 1:80 scale, including bathymetry and port structures. The waves are generated outside the port to the bathymetric of -20m ZHL (zero hydrographic of Leixões). Several sea states were simulated with irregular waves with periods between 10s and 16s and significant wave heights between 2m and 6m.The vessel is instrumented with an optical motion capture system according to the six degrees of freedom, composed of 4 cameras of high resolution that allows to follow the position of several targets placed in the ship and 6 load cells to measure the forces in the moorings and defenses. The measurement of free surface elevation was performed with a set of resistive probes and an ADV.
Year: 2018
Number Pages:
221-222pp.
Author(s): Pinheiro, L.; Pedro, F.; Abdelwahab, H.S.; Hinostroza , M.; Santos, J. A.; Fortes, C. J. E. M.
Editor: FEUP
Keywords: Movement and force measurement systems; Marine agitation; Ship movements; Physical model
Info
Galgamento em estruturas de proteção marginal face à subida de nível do mar
O sistema de proteção costeira da Cova-Gala, a sul da Figueira da Foz, inclui defesas longitudinais aderentes datadas de 1975 que têm como objetivo proteger a povoação da ação do mar. Ao longo dos anos têm-se registado eventos de galgamento destas obras que colocam em risco pessoas e bens. Face a uma possível subida do nível do mar na costa oeste portuguesa, é importante analisar a sua influência no agravamento do galgamento destas estruturas. Para tal, calculou-se o galgamento com a fórmula de Mase et al. (2013) utilizando as condições de agitação ao largo e níveis de mar obtidas de modelos de hindcast. Calculou-se ainda o caudal galgado para as mesmas condições de agitação e diferentes projeções de subida do nível do mar. A comparação de resultados permitiu concluir sobre o efeito da subida do nível do mar no galgamento para os valores considerados.
Year: 2018
Number Pages:
455-458pp.
Author(s): Pires, D.; Neves, M. G.; Oliveira, F. S. B. F.
Editor: Instituto Hidrográfico
Keywords: Subida do nível do mar; Estruturas de proteção marginal; Galgamento
Info
Influence of wave conditions in damages at scale model tests of rubble-mound breakwaters under sea level rising
Usually, physical model tests support the design of breakwaters considering different incident wave conditions, including extreme events. This paper describes two-dimensional physical model tests of a rock armour breakwater, performed at LNEC´s experimental facilities, under the framework of the HYDRALAB+ project. The goal of the present work is to evaluate damage evolution under wave conditions resulting from future climate change scenarios. Test results are presented in terms of the non-dimensional damage parameter (S) and of the percentage of displaced armour units (D). The data analysis is focused on the cumulative damage progression related with wave parameters as Hmax and H2%, for the imposed storm sequences. The use of the stability number (Ns), considering both H=Hs and H=H2% revealed a good agreement in order to characterize its relationship with damage evolution. On the other hand, the use of Hmax revealed a decrease of the linearity on damage evolution.
Year: 2018
Number Pages:
470-473pp..
Author(s): Lemos, R.; Neves, M. G.; Fortes, C. J. E. M.; Mendonça, A. C.; Ramos, A.; Capitão, R.; Reis, M. T. L. G. V.
Editor: Instituto Hidrográfico
Keywords: Storm sequences; Climate change; Damage evolution; Physical model
Info
Influence of wave conditions in damages at scale model tests of rubble-mound breakwaters under sea level rising
Usually, physical model tests support the design of breakwaters considering different incident wave conditions, including extreme events. This paper describes two-dimensional physical model tests of a rock armour breakwater, performed at LNEC´s experimental facilities, under the framework of the HYDRALAB+ project. The goal of the present work is to evaluate damage evolution under wave conditions resulting from future climate change scenarios. Test results are presented in terms of the non-dimensional damage parameter (S) and of the percentage of displaced armour units (D). The data analysis is focused on the cumulative damage progression related with wave parameters as Hmax and H2%, for the imposed storm sequences. The use of the stability number (Ns), considering both H=Hs and H=H2% revealed a good agreement in order to characterize its relationship with damage evolution. On the other hand, the use of Hmax revealed a decrease of the linearity on damage evolution.
Year: 2018
Number Pages:
470-473pp.
Author(s): Lemos, R.; Neves, M. G.; Fortes, C. J. E. M.; Mendonça, A. C.; Ramos, A.; Capitão, R.; Reis, M. T. L. G. V.
Editor: Instituto Hidrográfico
Keywords: Storm sequences; Climate change; Damage evolution; Physical model
Info
Modelação física do espraiamento e do galgamento de um quebra-mar de talude em cenários de alterações climáticas
Nesta comunicação descreve-se a análise bidimensional (2D) em modelo físico do espraiamento e galgamento de um quebra-mar de talude, em cenários de alterações climáticas, realizado no âmbito do projeto HYDRALAB+ (H2020-INFRAIA-2014-2015). Com efeito, a subida do nível médio do mar, bem como o aumento da intensidade e frequência de temporais, previsível em tais cenários, pode dar origem a fenómenos de espraiamento e galgamento das estruturas de proteção costeiras e portuárias, cada vez mais intensos e frequentes, tornando as estruturas mais vulneráveis, bem como as zonas por elas protegidas.Assim, num canal de ondas irregulares do LNEC, foi construído um perfil de um quebra-mar de enrocamento, à escala 1:30, e definido um programa de 15 ensaios, considerando valores de altura de onda significativa, período de pico e níveis de água representativos de condições de agitação incidente extremas, a que se poderão associar os referidos cenários de alterações climáticas.Para cada ensaio, efetuaram-se medições da elevação da superfície livre, do espraiamento e do caudal médio galgado. Os valores experimentais de espraiamento e de galgamento foram comparados com os previstos pelas formulações empíricas do EurOtop, para um dos cenários de alterações climáticas testado.
Year: 2018
Number Pages:
11p.
Author(s): Mendonça, A. C.; Lemos, R.; Fortes, C. J. E. M.; Capitão, R.; Neves, M. G.; Reis, M. T. L. G. V.
Editor: APRH
Keywords: Galgamento; Espraiamento; Fórmulas empíricas; Modelação física; Alterações climáticas
Info
Observing and monitoring maritime works through the use of the new OSOM+ methodology
This paper describes a programme under the responsibility of LNEC for the systematic observation and monitoring of maritime works, termed OSOM+, that has successfully been applied to an extensive number of maritime structures on the Portuguese mainland coast and abroad.The OSOM+ programme comprises the following four main components for each structure: Periodic visual inspections by a trained technician; Periodic aerial inspections with a UAV/drone; The ANOSOM-GIS database, to store and/or query obtained information, as well as to diagnose present, evolution and risk conditions; A mobile, portable, application, for real-time input and visualization of the database information.This recently updated methodology encompasses a number of tools and functionalities that are illustrated in this paper with applications to a real case scenario, the Ericeira
Year: 2018
Number Pages:
2035-2050pp.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Henriques, M. J.; Lemos, R.; Neves, M. G.; Reis, M. T. L. G. V.; Silva, L. G.
Editor: FURG
Keywords: Ericeira
Info
Physical modelling of motions and forces on a moored ship at the Leixões port
This paper describes the physical model, experimental setup and tests performed at the Portuguese Civil Engineering Laboratory (LNEC), to study the motions and forces of a moored ship at the Leixões port, for different sea states in irregular waves. The tests were carried out at one of the wave tanks of LNEC, where the Leixões port layout was implemented at scale 1:80 with the detailed model similar to the prototype bathymetry and surrounding structures. The moored ship is a 3.43 m long scale model of the well-known
Year: 2018
Number Pages:
2501-2517pp.
Author(s): Santos, J. A.; Pinheiro, L.; Abdelwahab, H.S.; Pedro, F.; Fortes, C. J. E. M.; Capitão, R.; Hinostroza , M.; Guedes Soares, C.
Editor: FURG
Keywords: Physical modelling; Irregular waves; Fenders; Mooring loads; Ship motions
Info
Reliability of scour protections with copula-based models
Scour protections are commonly designed according to semi-empiric methodologies, which are based on a deterministic approach. This often results in overestimated dimensions of the protection, namely, regarding the required minimum stone size for offshore engineering. Therefore, excessive costs of the protection are expected, when the deterministic design methodology is used. Moreover, these methodologies do not provide a measure of safety associated to the design of the scour protection. In this paper, one uses copulas theory to model the correlated long-term behaviour of the significant wave height and peak period. The statistical models are then used to address the probability of failure of a case study scour protection. The results show that the copula models influence the safety assessment of the scour protection. The research also includes a brief analysis of physical model tests, which were successfully used to define dynamically and statically stable scour protections for the case study analysed.
Year: 2018
Number Pages:
9p.
Author(s): Fazeres-Ferradosa, T.; Taveira-Pinto, F.; Reis, M. T. L. G. V.; Neves, L.
Editor: IHCantabria
Keywords: Physical modelling; Probability of failure; Scour protection; Copula
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
An integrated harbour navigation control system. NATO Po-Navigation. Adenda ao "Project Plan" proposto ao "Programa Ciência para a Estabilidade. Fase III" da OTAN
N/A
Year: 1994
Author(s): Covas, J. A.
Info
Cais da Calheta, Ilha de S. Jorge - Açores. Memorando
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido de uma protecção marítima aderente.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios tridimensionais de estabilidade e galgamentos do molhe de protecção do porto de recreio náutico do porto de Sines.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Análise das condições do porto de Sines. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Selecção de locais viáveis. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Ligação da lagoa de Óbidos ao mar - Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Carvalho, M. M.; Capitão, R.; Fortes, C. J. E. M.; Covas, J. A.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Coimbra.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.; Capitão, R.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Palma de Maiorca.
N/A
Year: 1994
Author(s): Covas, J. A.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|