Papers
Info
Extensão do molhe norte do Porto de Leixões: modelação física de um navio amarrado no posto A
O Porto de Leixões, localizado na costa norte de Portugal, é um dos maiores do país, recebendo diariamentevários navios de grandes dimensões. Um dos principais postos de acostagem situa-se à entrada do porto e encontra-se sujeito à agitação marítima que é difratada pelo olhe principal de proteção do porto. Para avaliar dos movimentos induzidos no navio estacionado nesse posto de acostagem e as forças exercidas nas suas amarras e defensas pela agitação incidente, utilizou-se o modelo físico de Leixões, construído num dos tanques do LNEC. Neste modelo físico, encontra-se representada a envolvente do porto de Leixões, assim como a sua batimetria. O modelo do navio
Year: 2020
Number Pages:
17-28pp.
Author(s): Pinheiro, L.; Pedro, F.; Abdelwahab, H.S.; Fortes, C. J. E. M.; Santos, J. A.; Capitão, R.
: Revista Recursos Hidricos
Editor: APRH
Volume:
Volume 41, Nº 1.
Keywords: Motions measurement; Constitutive relations; Moored ship; Scale model
Info
Numerical analysis of an onshore oscillating water column wave energy converter for different wall slopes
An alternative to the energy matrix expansion, due to the increase of global electricity demand, is the renewable sea wave energy source, which has high energy potential. The Oscillating Water Column (OWC) converter is one of the most studied, although it is not yet used at commercial scale. Therefore, searching the optimal geometric configuration is fundamental to turn this device viable. This study proposes a numerical analysis of an onshore OWC for different slopes of chamber walls (from 40o to 90o) and equipped with a Wells turbine. Simulations of incompressible 2D flows are performed by means of the FLUENT® software, which is based on Reynolds-averaged Navier-Stokes (RANS) equations. The k-
Year: 2020
Number Pages:
10-22pp.
Author(s): Güths, A.K.; Teixeira, P. R. F.; Didier, E.
: Revista Interdisciplinar de Pesquisa em Engenharia
Editor: RIPE
Volume:
Volume 6 No. 2.
Keywords: Numerical simulation; Renewable energy; Wave energy; Oscillating water column
Info
Numerical analysis of the influence of air compressibility effects on an oscillating water column wave energy converter chamber
The most studied device used for extracting wave energy is the Oscillating Water Column (OWC). In general, numerical simulations of these cases by means of models based on Reynolds Averaged Navier-Stokes equations adopt the Volume of Fluid method to deal with the free surface flow which is considered incompressible in both water and air. The aim of this study is to investigate the influence of the compressibility effect on the air inside the OWC chamber by the FLUENT® numerical model. A methodology is implemented, taking into account both water and air flows incompressible, but, at every instant, a pressure condition is imposed on the top boundary of the chamber to consider the compressibility effect. This pressure condition is based on an analytical equation that considers the isentropic transformation of the air and effects of Wells and impulse turbines. Results of compressible and incompressible numerical models are compared. The amplification factor, the root mean square of air pressure inside the chamber and OWC efficiency in relation to incident wave period, wave height and turbine characteristic relation are analyzed. Results show that air compressibility effects can diminish the predicted OWC efficiency up to about 20% in both Wells and impulse turbines.
Year: 2020
Number Pages:
1183-1193pp.
Author(s): Gonçalves, R.; Teixeira, P.; Didier, E.; Torres, F.
Editor: Elsevier
Volume:
Volume 153.
Keywords: Air compressibility; Volume of fluid; Numerical simulation; Oscillating water column device; Wave energy
Info
Numerical analysis of the performance of two onshore oscillating water column wave energy converters at different chamber wall slopes
In this study, a numerical analysis of the performance of two Oscillating Water Column (OWC) wave energy converters, at different front and back wall slopes, was carried out. The first device had vertical front and back walls and the second one had its wall slopes of 40° in relation to the horizontal plane. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes (RANS) equations, was used. The Volume of Fluid (VoF) method was employed to take into account free surface flows. The case study comprised a 10 m deep flume with an onshore OWC at its end, equipped with a Wells turbine. A 2D hydrodynamic mathematical model was employed and a 3D air pressure effect inside the OWC air-chamber was considered. Analyses of the hydrodynamics behavior, fluid-structure interaction outside (run-up/down, reflected waves) and inside the chamber (free surface elevation, sloshing) and energy distribution (pneumatic extracted energy, reflected wave energy and energy losses) were conducted. Results showed that the device with inclined walls had the best efficiency in comparison with the other one. However, the latter showed lower variation in efficiency in the wave period range than the former.
Year: 2020
Number Pages:
14p.
Author(s): Gaspar, L. A.; Teixeira, P.; Didier, E.
: Revista Ocean Engineering
Editor: Elsevier
Volume:
Volume 201.
Keywords: Volume of fluid; Finite volume method; Numerical simulation; Oscillating water column device; Wave energy
Info
Numerical analysis of the response of an onshore oscillating water column wave energy converter to random waves
The main objective of this study is to investigate differences of random incident waves from regular ones in performance of wave energy converters (WEC). A numerical analysis of an onshore oscillating water column (OWC) WEC is carried out by means of the FLUENT® software, which is based on Reynolds - Averaged Navier-Stokes equations. Analyses of the efficiency of an onshore OWC device with similar characteristics of the Pico
Year: 2020
Number Pages:
12p.
Author(s): Teixeira, P. R. F.; Didier, E.
: Revista Energy
Editor: Elsevier
Volume:
Volume 220.
Keywords: Irregular/Random waves; RANS-VoF; Wells turbine; Oscillating water column; Wave energy
Info
O papel da engenharia na proteção do território e das suas gentes
Atualmente, mais importante que assegurar a resistência de um aglomerado urbano a um eventual invasor, importa garantir a sobrevivência a catástrofes naturais das infraestruturas críticas que garantem a salubridade das condições de vida nesse aglomerado, a mobilidade dos habitantes e o abastecimento de bens essenciais. Em rigor, face ao carater aleatório destas solicitações, pretende-se que, uma vez terminadas essas solicitações extremas, eventuais estragos causados pelas mesmas não impeçam o restabelecimento, em tempo útil, das atividades normais da população. Nesta comunicação apresentam-se ferramentas e procedimentos para avaliação do risco associado a infraestruturas críticas com um viés para o controlo de cheias urbanas e de infraestruturas de transporte marítimo.
Year: 2020
Number Pages:
201-221pp.
Author(s): Santos, J. A.; Pinheiro, L.; Fortes, C. J. E. M.
: Madeira Região Resiliente. Aprender com o Passado. Série Estudos Cindínicos
Editor: RISCOS - Associação Portuguesa de Riscos, Prevenção e Segurança
Volume:
Volume 9 (2020).
Keywords: Avaliação do risco; Resiliência; Infraestruturas críticas
Info
Sines breakwater harbour: the OSOM+ monitoring program
The current program of Systematic Observation of Maritime Works (OSOM+), under development at the National Laboratory for Civil Engineering (LNEC), is essentially applied to rubble mound breakwaters. The OSOM
Year: 2020
Number Pages:
49-57pp.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Silva, L. G.; Henriques, M. J.; Martins, T.
: Italian Journal of Engineering Geology and Environment
Editor: Sapienza Università Editrice
Volume:
1 (2020).
Keywords: Drone; Visual observations; Maintenance; Monitoring; Rubble mound breakwaters
Info
The HIDRALERTA system: Application to the ports of Madalena do Pico and S. Roque do Pico, Azores
HIDRALERTA is a forecast and early warning system for coastal and port regions capable of predicting emergency situations, as well as carrying out risk assessment. The system concentrates on evaluating wave overtopping and flooding scenarios. It uses offshore sea-wave and wind forecast data, as well as tide data, as input to determine wave overtopping at specific locations. The calculation of the mean overtopping discharge over a structure is made through artificial neural network (ANN) tools and/or empirical formulae, which are able to define the spatial distribution of the flow behind the structure.The HIDRALERTA system is composed of four modules developed in Open Source Web Technology, mainly using the Python Language. The Warning System can be configured and adapted for specific scenarios. The system has been successfully tested for the Port and Bay of Praia da Vitória, Terceira Island, Azores, Portugal, and is now under development and being implemented at the ports of Madalena do Pico and S. Roque do Pico.This paper describes the work carried out to date on the system and its application to these two ports in the Pico Island, Azores.
Year: 2020
Number Pages:
10p.
Author(s): Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Pinheiro, L.; Poseiro, P.; Serrazina, V.; Mendonça, A. C.; SMITHERS, N; SANTOS, M.I.; Barateiro, J.; Azevedo, E. B.; SALVADOR, M.; Reis, F.
: Revista Aquatic Ecosystem Health & Management
Editor: Taylor & Francis
Keywords: Warning system; Flooding; Wave overtopping
Info
3-D scale model study of wave run-up, overtopping and damage in a rubble-mound breakwater subject to oblique extreme wave conditions
A set of scale-model tests carried out to enlarge the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater
Year: 2019
Number Pages:
32-41pp..
Author(s): Santos, J. A.; Pedro, F.; Coimbra, M.; Figuero, A.; Fortes, C. J. E. M.; Sande, J.; Körner, M.; Lemos, R.; Bornschein, A.; Weimper, J.; van den Bos, J.; Dost, B.; Hofland, B.; Carvalho, R.; Alvarellos
: Defect and Diffusion Forum
Editor: Trans Tech Publications Ltd, Switzerland
Volume:
Volume 396.
Keywords: Instrumentation; 3D-Wave basin; Physical modelling
Info
A numerical tool for modelling oscillating wave surge converter with nonlinear mechanical constraints
Mechanical constraints have a non-negligible influence in the motion of oscillating wave surge converter (OWSC) devices. The key novelty of this paper is a numerical simulation tool for OWSCs that does not neglect or significantly compromise mechanical constraints such as hydraulic power take-off (PTO) system, revolute joints and frictional contacts among components. The paper is aimed at presenting the key components of the numerical simulation tool and at validating it with laboratory data featuring an OWSC with mechanical constraints under regular and irregular waves. It is based on the implementation of the multibody solver of Project Chrono under the Smoothed Particle Hydrodynamics (SPH) model of DualSPHysics, where the SPH solver resolves the interaction between wave and flap and the multibody solver resolves the interaction between flap and mechanical constraints. Comparison between numerical results and experimental data show that the numerical simulation tool properly predicts the dynamics of the OWSC. Furthermore, in what concerns hydrodynamics of the near-flap flow, the computed and measured free-surface elevations and phase-averaged flow field show reasonable agreement. Once properly validated, the numerical simulation tool is then applied to study the influence of several mechanical constraints, PTO damping characteristics and flap inertia on the hydrodynamic of the OWSC. The viability of OWSC design solutions based on the developed numerical simulation tool is emphasised, in view of its performance in the test cases to which it was subjected.
Year: 2019
Number Pages:
2024-2043pp.
Author(s): Brito, M.; R. Canelas; García-Feal, O.; Domínguez, J. M.; Crespo, A. C.; Ferreira, R. L.; Neves, M. G.; Teixeira, L.
: Renewable Energy
Editor: Elsevier
Volume:
146.
Keywords: Wave-structure interaction; Wave energy; Mechanical constraints; Oscillating wave surge converter (OWSC); Smoothed particle hydrodynamics (SPH); Numerical modelling
|
Comunicação
Info
Forecast, risk assessment and alert system for ships in ports
This work presents the development of a numerical integrated system to help prevent emergency situations and minimize risks associated with sea waves
Year: 2017
Number Pages:
13p.
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Lopes, P.; Poseiro, P.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Waves; Alert system; Risk assessment; Moored ships
Info
Galgamento em estruturas verticais: comparação de dados de ensaios com resultados do modelo numérico AMAZON e de fórmulas empíricas
Neste trabalho estuda-se o galgamento em estruturas marítimas verticais impermeáveis através da aplicação do modelo numérico AMAZON, que é um modelo bidimensional, baseado na resolução das equações não lineares de águas pouco profundas. Para validar a sua aplicação, os resultados de caudal médio galgado obtidos com o modelo foram comparados com os resultados de ensaios em modelo físico bidimensional realizados anteriormente e disponíveis na base de dados do projeto europeu CLASH. Os resultados foram ainda comparados com os das fórmulas empíricas / semi-empíricas de Van der Meer & Bruce (2014), Goda (2008) e de Hedges & Reis (Reis et al., 2013). A fórmula de Van der Meer & Bruce apresenta melhores aproximações aos caudais médios medidos que constam na base de dados do CLASH, seguida da fórmula de Goda e dos resultados do AMAZON, embora estes dois últimos apresentem valores bastante próximos. Assim, enquanto não se fizerem melhorias no modelo e/ou não se estender a outros ensaios a análise feita no âmbito deste trabalho, os resultados sugerem que não há vantagem na sua utilização face às formulações disponíveis, tendo também em conta o tempo computacional significativo exigido para executar o AMAZON.
Year: 2017
Number Pages:
17p.
Author(s): Reis, M. T. L. G. V.; Neves, M. G.; Gaspar, J.J.J.; Hu, K.
Editor: PIANC
Keywords: Modelo numérico AMAZON; Estruturas verticais; Galgamento
Info
Galgamento num quebra-mar de talude em cenários de alterações climáticas: resultados obtidos em modelo físico e com fórmulas empíricas
O projeto HYDRALAB+ (H2020-INFRAIA-2014-2015) reúne uma rede Europeia de institutos de hidráulica para o estudo de estratégias de adaptação às alterações climáticas através de ensaios experimentais e cujos resultados são essenciais para a calibração e validação de modelos numéricos, fórmulas empíricas, redes neuronais, etc. Os ensaios experimentais desenvolvidos no LNEC, no âmbito do HYDRALAB+, Tarefa 8.2 do RECIPE tem como objetivo a análise do dano num quebra-mar de talude, do galgamento e do espraiamento para quatro cenários de temporal correspondentes a situações extremas associadas a cenários de alterações climáticas. Os ensaios foram realizados num canal de ondas irregulares no qual foiimplementada uma secção transversal do quebra-mar, com um manto constituído por enrocamento.No presente estudo comparam-se os valores do galgamento medidos nos ensaios em modelo físico com resultados estimados por fórmulas empíricas. Testou-se o efeito de um temporal num cenário de alterações climático, através do aumento da altura significativa de onda com o aumento do nível de água. Foi testado um conjunto de condições de agitação incidentes em combinação com dois níveis de maré.A análise dos resultados é feita com o intuito de estimar com precisão a ocorrência de galgamento em quebra-mares, um fenómeno que ainda se torna mais relevante em cenários de alterações climáticas. Com efeito, nestes cenários é previsível a subida do nível médio do mar, bem como o aumento da intensidade e frequência de temporais, o que pode dar origem a fenómenos de espraiamento/galgamento cada vez mais frequentes, tornando assim cada vez mais vulneráveis as estruturas de proteção costeiras e portuárias, bem como as zonas por elas protegidas.
Year: 2017
Number Pages:
13p.
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Lemos, R.; Neves, M. G.; Ramos, A.; Capitão, R.
Editor: PIANC
Keywords: Fórmulas empíricas; Modelação física; Alterações climáticas; Galgamento; Quebra-mar
Info
HIDRALERTA: o sistema e as ferramentas de validação
Este trabalho pretende mostrar os procedimentos utilizados pelo sistema HIDRALERTA para a previsão dos galgamentos costeiros, bem como as ferramentas que têm sido utilizadas para a sua validação. Foram reproduzidas com o sistema as situações de tempestades passadas, para as quais houve relatos documentados de galgamentos significativos e que causaram danos. Esta simulação permitiu perceber a fiabilidade global do sistema e ajustar os limites pré- estabelecimentos para o acionamento de alertas. Com o sistema operacional desde 2015, a documentação que tem sido levantada, através de fotografias e vídeos, pelas autoridades e comunidade locais aquando da previsão da ocorrência de tempestades, têm sido um grande contributo para o melhoramento do sistema. Foi instalado no campo, um sistema de videovigilância que permite detetar e captar automaticamente imagens de galgamentos para comparar com os resultados do sistema. De forma complementar, para avaliação da agitação marítima, utilizam-se as medições da boia ondógrafo instalada junto ao porto e para a validação do fenómeno do galgamento, compararam-se as medições obtidas nos ensaios em modelo físico do perfil tipo do quebra-mar sul, com os resultados da ferramenta neuronal NN_OVERTOPPING2 (Coeveld et al., 2005) (atualmente incorporada no sistema) e com o modelo numérico SWASH (Zijlema et al., 2011) (que se encontra em processo de implementação).
Year: 2017
Number Pages:
20p.
Author(s): Poseiro, P.
Editor: PIANC
Keywords: Porto da Praia da Vitória; Previsões; Eventos históricos; Validação; Sistema HIDRALERTA
Info
Measuring damage in physical model tests of rubble mounds
This paper studies novel ways to evaluate armour damage in physical models of coastal structures. High-esolution damage data for reference rubble mound breakwaters obtained under the HYDRALAB+ joint-esearch project are analysed and discussed. These tests are used to analyse the way to describe damage, the influence of the sequence of testing, and touches on the possible influence of sea level rise. Results of two test programmes were used. Firstly, 3D physical model tests carried out at the University of Porto, in cooperation with Deltares, were used. Here a wide breakwater trunk was used for statistical reasons. Additionally, 2D test results from LNEC were analysed. Tests for a sea level rise scenario resulted in less damage to the seaside slope. In addition, clear differences between
Year: 2017
Number Pages:
10p.
Author(s): Hofland, B.; Rosa-Santos, P.; Taveira-Pinto, F.; Almeida, E.; Lemos, R.; Mendonça, A. C.; Fortes, C. J. E. M.
Editor: ICE - Institution of Civil Engineers
Keywords: Damage depth; Damage parameter; Breakwaters; Rubble-mound
Info
Modelação física e numérica da interação hidrodinâmica entre dois navios
Nesta comunicação, analisa-se, recorrendo à modelação física e à modelação numérica, a interação hidrodinâmica entre dois navios, um dos quais parado, o navio
Year: 2017
Number Pages:
20p.
Author(s): Pedro, F.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Hinostroza , M.
Editor: PIANC
Keywords: Interação navio-navio; Modelo numérico; Modelo físico; Movimentos dos navios; Ondas de esteira
Info
Numerical analysis of the distribution of incident wave energy on an onshore oscillating water column wave energy converter
In this study, a numerical analysis to evaluate the energy efficiency of an Oscillating Water Column (OWC) wave energy converter is carried out. The device geometry is based on the pilot plant installed on Pico Island, Azores, Portugal. The methodology consists in calculating the percentage of the incident energy that is distributed along the wave energy conversion. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes (RANS) equations, is used. The Volume of Fluid (VoF) method is employed to take into account the water and air fluids. The case study comprises a flume 10 m deep with an onshore OWC at its end. The distribution of the incident wave energy (1 m wave height with a 9 s period) is determined in terms of reflected wave energy, water column oscillation potential energy, pneumatic energy and energy losses due to viscosity and turbulence dissipations. Results show that the incident wave energy is distributed around 37% for the sum of reflected wave energy and viscosity energy loss, 52% for pneumatic energy and 11% for water column oscillation potential energy.
Year: 2017
Number Pages:
13p.
Author(s): Gaspar, L. A.; Teixeira, P.; Didier, E.; Neves, M. G.
Editor: Não disponível
Keywords: Volume of fluid; Oscillating water column device; Finite volume method; Numerical simulation; Wave energy
Info
Numerical analysis of the influence of air compressibility effects on the oscillating water column water energy converter chamber
The most studied device used for extracting wave energy is the Oscillating Water Column (OWC). In general, numerical simulations of these cases by means of models based on Reynolds-Averaged-Navier-Stokes (RANS) equations adopt the Volume of Fluid (VoF) method to take into account the water and air whose flows are incompressible. The aim of this study is to investigate the influence of the compressibility effect on the air inside the chamber by means of FLUENT® numerical model. Both water and air flows are still considered incompressible, but, at every instant, a pressure based on an analytical equation that takes into account the turbine characteristic relation (kt) of a Wells turbine and the isentropic transformation of the air is imposed on the top boundary of the chamber. Incident waves with period of 9 s and 1 and 2 m high are imposed in a flume 10 m deep with an onshore OWC at its end (kt = 240 Pa s m-3). Results show differences between incompressible and compressible air around 12% in the air pressure amplitude inside the chamber and about 21% in the average pneumatic power.
Year: 2017
Number Pages:
14p.
Author(s): Gonçalves, R.; Teixeira, P.; Didier, E.; Torres, F.
Editor: Não disponível
Keywords: Volume of fluid; Finite volume method; Numerical simulation; Oscillating water column device; Wave energy
Info
Overtopping events in breakwaters: comparison of 2D physical experiments and empirical formulae
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure as well as the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase run-up/overtopping events and make the existing coastal/harbour structures more vulnerable to damage. Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. Project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios. The experimental work developed at LNEC within HYDRALAB+, TASK 8.2 of RECIPE, entitled
Year: 2017
Number Pages:
3749-3757pp.
Author(s): Mendonça, A. C.; Lemos, R.; Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Neves, M. G.; Ramos, A.; Capitão, R.
Editor: IAHR & USAINS HOLDING SDN BHD
Keywords: Hydralab; Empirical formulae; Physical experiments; Breakwaters; Overtopping
Info
Simulação numérica da propagação de ondas regulares num canal tridimensional utilizando o código IHFOAM
O conhecimento das características de propagação, transformação e rebentação das ondas próximo da costa é fundamental para estudos de hidrodinâmica e para o projeto de estruturas costeiras e portuárias.No presente artigo apresentam-se as simulações numéricas feitas utilizando o pacote de software OpenFOAM®, recorrendo ao solver IHFoam, para simular a propagação de ondas regulares sem rebentação num canal tridimensional. O código numérico resolve as equações de Navier-Stokes em regime transitório e utiliza um esquema do tipo VoF (Volume of Fluid) para identificar a superfície livre. Foi considerada uma onda regular incidente com 1,5 s de período e 0,1 m de altura. Esta é uma das condições de entre o vasto conjunto de ensaios em canal de ondas, realizado no Laboratório Nacional de Engenharia Civil (LNEC) cujo objetivo foi a análise da hidrodinâmica da propagação de ondas sobre um fundo de batimetria variável, para várias condições de agitação incidente.São feitas comparações entre os resultados numéricos e os experimentais. Estas comparações incluem: evoluções temporais de sondas de nível em várias localizações ao longo do canal e correspondentes espetros de amplitude; evolução da altura significativa e do período médio das ondas ao longo do canal; evolução temporal das componentes da velocidade em localizações selecionadas no canal e distribuição bidimensional dessas componentes.Constata-se que os resultados numéricos obtidos apresentam valores próximos dos experimentais. As diferenças verificadas são atribuíveis a imprecisões numéricas bem como a diferenças entre a forma de geração e dissipação de ondas entre o numérico e o experimental.
Year: 2017
Number Pages:
15p.
Author(s): Conde, J. M.; Cardoso, J.M.S.M.; Fortes, C. J. E. M.
Editor: PIANC
Keywords: Análise temporal; Análise espectral; Propagação de onda; Ondas regulares; Canal de ondas; IHFoam; OpenFOAM; Simulação numérica
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|