Publications

A avaliação do dano causado pela agitação incidente em modelos físicos de quebra mares de taludes pode ser realizada comparando volumes e profundidades erodidas entre levantamentos consecutivos de cada talude.Atualmente, estes levantamentos podem ser realizados de forma não intrusiva, recorrendo a técnicas fotogramétricas, a laser scan ou a sensores de posição baseados na metolodologia Time of Flight (ToF). Dependendo das condições de levantamento e da metodologia de pós-processamento das nuvens de pontos obtidas, estas técnicas permitem obter modelos tridimensionais de superfície, com elevada precisão.Em detalhe, as diferenças de volume entre os levantamentos inicial e

SAFEPORT safety system aims to daily reports to the Sines harbor administration, potential emergency situations regarding ships

Early warning systems are an important tool for local authorities to detect emergency situations in advance and initiate the necessary safety measure. These systems often depend on numerical models to estimate wave overtopping in the affected areas. The SWASH model has shown to deliver good results in recent overtopping studies. The To-SEAlert project has the aim of increasing the efficiency, robustness and reliability of the HIDRALERTA early warning system. This study shows a first intent to implement the SWASH model to simulate wave overtopping for the Ericeira prototype. SWASH was implemented for one breakwater profile used to simulate the overtopping discharge and evaluate the associated risk levels. It was compared to the current approach used in HIDRALERTA, which resorts to a neural network trained with a physical modeling database, NN_OVERTOPPING2. Finally, both approaches were compared with previously analyzed video images of the breakwater. The results showed that SWASH generally overestimates overtopping and is not in good agreement with the video images. NN_OVERTOPPING2 has a better agreement with the video images. A possible reason for the overestimation might be the wave direction, which cannot be included in one-dimensional simulations in SWASH.

Early Warning Systems are crucial disaster-risk-reduction strategies as they allow local authorities to prepare and implement in advance the necessary measures to avoid major destruction and risk for individuals and properties caused by storm events. HIDRALERTA is a forecast, early warning and risk assessment system for port and coastal areas that uses forecasts of sea waves and water levels to evaluate overtopping/flooding events and risks associated with the mooring of ships. The distinguishing feature of this system is that the risk assessment is based on specific parameters related to the actual risk being predicted, such as overtopping discharges, or the ship

In this study, performance of an oscillating water column wave energy converter inserted into a hypothetical composite breakwater with rubble mound foundation located at the southern Brazilian coast is analyzed. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes equations, is used in 2D numerical simulations by adopting the Volume of Fluid method to consider the two-phase flow (water and air). The influence of the rubble mound foundation on the pneumatic power, the run-up/down, the free surface elevation inside the chamber, and the energy balance for different incident waves are investigated. The rubble mound foundation of the composite breakwater slightly affected hydrodynamics; however, it reduced significantly the pneumatic power of the device from 7 to 15% comparing with that obtained to a vertical breakwater founded on an impermeable foundation.

This study aims proposing a novel geometry of the onshore Oscillating Water Column (OWC) device to increase its efficiency. A comparison between standard OWC

Este trabalho descreve a aplicação do sistema SAFEPORT no Porto de Sines, e em particular, o teste de uma das funcionalidades do sistema relacionada com otimização de operações marítimas em ambiente portuário. O SAFEPORT é um sistema de previsão e alerta de perigosassociados a navegação.A aplicação do sistema SAFEPORT permitiu a otimização dos esquemas de amarração de três navios distintos acostados em três terminais do Porto de Sines, sob as condições de agitação marítima provocadas pela tempestade Dora (4 de dezembro de 2020). Foram construídos os modelos dos três navios e analisados vários esquemas de amarração a fim de obter uma solução ótima para cada navio. Este exercício mostrou que o sistema SAFEPORT é uma ferramenta útil para apoio à decisão nos sistemas de amarração dos navios. A configuração dos cabos de amarração tem grande influência no comportamento, e consequentemente na segurança, dos navios amarrados sujeitos a situações de tempestade.

The assessment of damage evolution in scale model tests of rubble-mound breakwaters can be achieved by comparing eroded depths and volumes between consecutive surveys. Aiming to evaluate damage evolution on rubble-mound breakwater, scale model tests were recently conducted on the maritime hydraulic facilities of the National Laboratory for Civil Engineering. This paper focuses on the use of novel, non-intrusive survey methodologies such as the Time of Flight (ToF) principle technique. In this study, damage evaluation is based on the comparison of point clouds obtained before and after each test series, enabling the calculation of eroded depths and eroded volumes and the estimation of displaced units by using a non-dimensional damage parameter based on the eroded volume.

O conhecimento das forças devido à acção das ondas que atuam nos emissários submarinos, compostos por uma conduta e anéis de estabilização de betão, para agitação com direcção de propagação próxima da direcção do emissário, é essencial para o seu dimensionamento. Esta é uma configuração complexa, para a qual a modelação numérica, utilizando modelos 3D de tipo RANSVoF (Reynolds-Average-Navier-Stokes Volume-of-Fluid), é especialmente adequada para obter uma estimativa das forças na conduta e nos anéis. O presente estudo consiste na simulação de um emissário submarino com anéis de estabilização à escala 1:15 que foi ensaiado num tanque de ondas tridimensional, nas instalações do Danish Hydraulics Institute, para estudar a influência da direcção da agitação incidente e da distância da conduta ao fundo nas forças que atuam no emissário. Os resultados numéricos são comparados aos experimentais: obtém-se uma boa concordância nas forças de arrasto, mas as forças de sustentação são subestimadas numericamente.

Os quebra-mares de talude estão entre as obras de proteção marítimo-portuárias mais frequentes em Portugal. Devido ao ambiente marítimo agressivo a que estão sujeitos, requerem obras de manutenção periódicas que garantam o seu funcionamento adequado.O elevado valor associado às reparações e/ou reabilitações e às grandes dimensões dos quebra-mares, muitas vezes inviabilizam que intervenções em estruturas desta natureza sejam realizadas de forma completa.Realizou-se um estudo de análise multicritério, com objetivo de propor critérios a serem utilizados na metodologia Measuring Attractiveness by a Category Based Evaluation Technique (MACBETH), acrescida de informações técnicas da base de dados da aplicação de Análise de Observação Sistemática de Obras Marítimas (ANOSOM), com a intenção de otimizar o impacto dos investimentos e auxiliar a tomada de decisões quanto a priorização de intervenções diretamente relacionadas com a maximização da vida útil dos quebra-mares e o seu correto funcionamento. Os casos de estudo são os quebra-mares de Vilamoura, Quarteira e Faro-Olhão.

A geografia marítima nem sempre proporciona à costa um ambiente seguro para a instalação e manutenção de portos. Com este propósito, constroem-se obstáculos estruturais capazes de proteger o porto contra a agitação marítima, permitindo que as embarcações executem com segurança e eficiência as operações portuárias.Os quebra-mares de talude são as estruturas de proteção marítimo-portuárias mais frequentes em Portugal e estão sujeitos à ação de intempéries e agitação marítima intensa, requerendo obras de manutenção periódicas que garantam o seu funcionamento adequado. No entanto, devido ao elevado valor associado às reparações e/ou reabilitações e à envergadura deste tipo de obras, nem sempre é possível que as intervenções sejam realizadas de forma completa.As informações técnicas, relativas às intervenções em quebra-mares de talude, estão registadas na base de dados de Análise de Observação Sistemática de Obras Marítimas (ANOSOM), uma ferramenta de diagnóstico de estruturas marítimas de proteção portuária e de embocaduras, desenvolvida em MS ACESS pelo Laboratório Nacional de Engenharia Civil (LNEC), a qual mantém uma ampla biblioteca de registos originados em observações regulares de obras marítimas portuguesas, desde o ano de 1995 até à atualidade.As metodologias de análise de multicritério contribuem de forma significativa para a maximização do impacto dos investimentos, proporcionando a tomada de decisões de forma eficiente, no que tange a priorização das intervenções diretamente relacionadas com a vida útil da estrutura e com o seu correto funcionamento.O estudo contido na presente comunicação tem por objetivo propor a utilização de metodologias de análise multicritério para apoio à decisão, através do levantamento de diversos critérios, submetidos a avaliação de especialistas neste tipo de infraestruturas.

Damage evolution in rubble mound breakwaters is one of the key issues in coastal engineering, in particular their design, linked to maintenance and preventive strategies. One of the major challenges is to determine how the lower parts of the breakwaters evolve under sea states. The settlements and movements in this area are responsible of the evolution in the medium and upper parts, in particular the active zone, that are finally the areas where the initial damage and destruction are produced. To analyze these zones, scanning methodologies are increasing their application, specially to determine more precisely the initial movements of the pieces, porosity evolution and damage.This paper presents the application of a scanning device, a Kinect® system, both to analyze a rock armour and Antifer protection in 2D tests conducted in two facilities: LNEC (Portugal) and CITEEC (University of A Coruña, Spain). The analysis presents the initial approach to the validation process and calibration errors, and comparison with existing formulae. The comparison was done only in the initial and final steps, so no water was present in the flume when scanning. Further work is actually developed with intermediate steps (and water), and 3D tests including a roundhead (RODBreak project, Hydralab+, H2020-INFRAIA-2014-2015. Project ID: 654110).

Esta comunicação apresenta uma avaliação do risco de galgamento das estruturas de defesa marítima do Porto de Leixões, nomeadamente o quebra-mar norte e o quebra-mar sul.Recorrendo a previsões de agitação marítima em águas profundas fornecidas pelo modelo WAM, é feita a sua propagação com os modelos numéricos SWAN e DREAMS de modo a obter-se a caracterização da agitação marítima incidente nestas estruturas. Este trabalho assenta na utilização de dados de agitação marítima que cobrem um período de 38 anos (1979

Nesta comunicação descreve uma aplicação do modelo numérico XBEACH no cálculo do espraiamento, galgamento e consequente inundação de sete praias da zona da Costa da Caparica, concelho de Almada, recorrendo à metodologia desenvolvida no âmbito do projeto de investigação HIDRALERTA.Com base nos dados de 2007 a 2016 de agitação marítima ao largo, fornecidos pelo modelo de previsão da agitação marítima WAVEWATCH III, procede-se à transferência destes dados para locais em frente a cada uma das praias da Costa da Caparica, utilizando o modelo numérico SWAN, de modo a caraterizar o regime de agitação marítima nesses locais. De seguida, para o cálculo do espraiamento, galgamento e inundação, recorre-se ao modelo XBEACH, de previsão do efeito de tempestades marítimas na erosão e inundação de zonas costeiras. Os resultados numéricos obtidos para um conjunto de 4 tempestades e para as várias praias são comparados com valores calculados com base em fórmulas empíricas.Os resultados numéricos e das fórmulas empíricas apresentam uma concordância razoável em termos do nível máximo de inundação para a zona norte da Praia de São João da Caparica, o mesmo não se verificando nas zonas também protegidas por estruturas de defesa costeira.

This paper describes the 2D physical model tests performed for a rock armour breakwater at LNEC´s facilities, under the framework of the HYDRALAB+ project. The aim of the present work was to evaluate damage evolution under different approaches of storm sequences, corresponding to different climate change scenarios. The tested wave conditions intended to simulate different sequences of water levels (low water and high water), significant wave heights and peak periods. Damage evaluation was based on the traditional visual method and on stereo-photogrammetric techniques. Results in terms of the non-dimensional damage parameter, the non-dimensional damage depth and the percentage of displaced armour units are compared for the different storm sequences.

This paper describes the 2D physical model tests performed for a rock armour breakwater at LNEC´s facilities, under the framework of the HYDRALAB+ project. The aim of the present work was to evaluate damage evolution under different approaches of storm sequences, corresponding to different climate change scenarios. The tested wave conditions intended to simulate different sequences of water levels (low water and high water), significant wave heights and peak periods. Damage evaluation was based on the traditional visual method and on stereo-photogrammetric techniques. Results in terms of the non-dimensional damage parameter, the non-dimensional damage depth and the percentage of displaced armour units are compared for the different storm sequences.

Understanding damage progression under future climate changes is of utmost importance for effective management of coastal defenses. Significant wave height, wave period, storm direction and water level have been considered the main design variables for coastal structures. Usually, physical model tests support the design of breakwaters considering different incident wave conditions that include also extreme events.This paper describes the two-dimensional (2D) physical model tests of a rock armor breakwater, performed at LNEC´s experimental facilities, under the framework of the HYDRALAB+ project. The aim of the present work was to evaluate damage evolution under future climate change scenarios, by using different damage evaluation techniques. The tested wave conditions simulated a storm sequence where two water levels (low water and high water) were considered, as well as an increase of the wave height. The water levels and the wave heights were chosen to simulate extreme events forecasted on climate change scenarios.Damage evaluation was based on the traditional counting method and on stereophotogrammetric techniques. Test results are presented in terms of the damage parameter S (Broderick & Ahrens, 1982) and in terms of the percentage of removed armor units. The analysis is focused on the damage progression during the scale model tests, for the imposed storm sequence.The damage presents an oscillating behavior with two main damage areas corresponding to the active zones for each level, due to the variation of the water level between low-water and highwater. This behavior differs significantly from that found for the common storm sequences usually tested, where the water level does not change.Both measuring techniques lead to an intermediate damage of the cross-section breakwater. However, the damage parameter assessment with the stereo-photogrammetric technique allows a more versatile evaluation, since it is possible to characterize damage in representative zones of the cross-section.

This paper analyses the influence of water depth and speed variation in the hydrodynamic interaction between a navigating ship and a stationary one, using physical and numerical modelling. The passing ship is a self-propelled scale model of the

N/A

N/A

N/A

N/A

N/A

A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project

The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.

According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.

This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.

Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled

This deliverable is related to task 8.2

Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.

N/A

N/A

N/A

N/A

N/A

N/A