Publications

This paper presents the analysis of the probability of occurrence of wave overtopping events as well as its consequences at the Port of Las Nieves in Agaete, Gran Canaria Island, with the evaluation of the resulting level of flood risk. The study has been conducted using a third-generation spectral wave model to reproduce wave propagation from deep to shallow water depths considering the associated mean sea level, and a neural network-based model, for estimating mean wave overtopping discharges. Results reveal that overtopping in the initial sections of the port, located in the port access area, is substantially higher than that associated with the cross-sections of the main body of the breakwater, so that control actions to reduce overtopping are required due to the important socioeconomic implications regarding the infrastructure inoperability.

Neste trabalho, descreve-se a aplicação ao porto e baía da Praia da Vitória, na ilha Terceira, Açores, Portugal, da metodologia de avaliação do risco de galgamentos em estruturas marítimas em desenvolvimento no LNEC, considerando duas ferramentas neuronais para cálculo dos galgamentos baseadas em resultados da aplicação de redes neuronais artificiais, nomeadamente a ferramenta NN_Overtopping2 e a Overtopping Predictor v1.1. Em particular, avalia-se comparativamente quais as implicações que a utilização de cada uma destas ferramentas tem em termos de número de eventos de galgamento e magnitude dos caudais médios galgados, bem como consequente grau de risco, para as 9 secções-tipo de estruturas marítimas estudadas no porto e baía da Praia da Vitória. O período de estudo é de 5 anos (2008 a 2012).

O galgamento de estruturas portuárias consiste na passagem de água sobre o coroamento da estrutura pela ação da agitação marítima e é um dos fenómenos com maior impacto na integridade da estrutura e na segurança da zona por ela protegida. O principal objetivo deste trabalho é estudar o galgamento num quebra-mar de taludes, com um importante muro cortina, protegido por um quebra-mar submerso. Em particular, pretende-se otimizar a geometria do quebra-mar submerso situado a barlamar do quebra-mar de taludes, no qual se pretende diminuir o galgamento.A estrutura marítima em estudo é o molhe norte do Porto de Leixões, em frente ao qual já existe um quebra-mar submerso na zona da cabeça. Pretende-se estender a zona do molhe protegida pelo quebra-mar submerso e, para tal, é necessário estudar qual a melhor geometria e posição a adotar para este quebra-mar.Para estudar a influência da geometria e da posição do quebra-mar submerso no galgamento do molhe norte, utilizou-se o modelo numérico IH2VOF. Simularam-se três condições de agitação regular, que diferem somente na altura de onda, e sete geometrias do quebra-mar submerso, que diferem da configuração original (a existente atualmente) em três características: a distância entre o quebra-mar submerso e o molhe, a cota de coroamento do quebra-mar submerso e a sua largura de coroamento.Com a realização deste estudo, para as condições de agitação consideradas, verificou-se que as características com maior impacto na redução do galgamento no molhe norte do Porto de Leixões são: o aumento da distância entre o quebra-mar submerso e o molhe e o aumento da cota de coroamento do quebra-mar submerso. O caudal médio de galgamento para as condições de agitação em estudo reduziu-se de um valor máximo de 0,71 l/s/m para a configuração original para 0,02 l/s/m em duas das novas configurações analisadas, ou seja, uma redução de 97% face à configuração original.

The susceptibility of bridge decks to vortex induced oscillations can b eaddressed through wind-tunnel testing. This paper considers the case of the Vila-Real Bridge, in the north of Portugal, which has the highest deck above ground (230m), among concrete-deck bridges cable-stayed in the central plane. It has a single-cell rectangular box girder with a wide top flange supported by regularly spaced inclined struts. Aeroelastic studies of this precise type of deck seem nonexistent in the literature.Results of sectional model tests are presented for a selection of three distinct angles of attack and three deck configurations, including a solution, alternative to the usual mitigation measures, that solved the susceptibility to vortex induced vibration of the deck and that has no relevant additional design or building costs.With the proposed approach, bridge designers may be able to relegate the use of sections with high aerodynamic performance

Wave-induced flow velocity and turbulence may cause scouring in the seabed around coastal structures depending on the wave climate and tidal water depth. A 3-D physical modelling study was conducted to investigate the possible causes of the sinking of two submerged coastal structures on the Santa Maria del Mar (SMM) beach, Spain. The experimental investigation was conducted by employing a Froude similarity law with a geometric scale of 1:20, and the submerged modular structure was subjected to different wave climates and tidal water levels. The combinations of the significant wave height and peak period were chosen from in-situ real wave conditions thatwere monitored during the sinking of the prototype structures. Linking and unlinking conditions for the modules in the structure were investigated in this study. The results show that the modules sank to approximately 48% of their height at the end of the tests with storm waves and semi-linking conditions of low water depth. Most of the experimental results were compatible with the prototype monitoring results. Tests with proper linking among themodules and testswith an appropriate gravel foundation resulted in a sustainable solution because they presented much less or almost no scouring and sinking.

Despite the simplicity of the geometry of the circular cylinders, the uniform flow around them is complex,since it may induce unsteady forces on structures associated with vortex shedding. This paper describes the study of two circular cylinders (the downstream one is elastically mounted in transversal direction) in tandem arrangement subject to bi-dimensional uniform laminar flows at low Reynolds numbers. The academic numerical model Ifeinco, which is based on the finite element method and uses a partitioned scheme that considers two-way interaction of fluid flow and structure, has been employed to the analysis.Firstly, both stationary cylinders in tandem arrangement for Re = 100 are analysed for center to center distance between the cylinders, L/D, from 1.5 to 6.0. Results of lift and drag coefficients and Strouhal number are compared with other numerical results and good agreement is found. Secondly, numerical results for L/D = 5.25, considering downstream elastically mounted cylinder, are analysed for Reynolds numbers ranging from 100 to 140. It shows that the resonance occurs for Reynolds numbers between 115 and 120 and the maximum dimensionless amplitude of oscillation is 0.721 for Re = 118.

Techniques based on artificial neural networks (ANNs) have been increasingly applied to predict emergency situations, such as extreme wave conditions, wave overtopping or flooding, and damage to maritime structures, in coastal and port areas. In this work, a fuzzy adaptive resonance theory with mapping (FAM) ANN was trained to predict the wave regime both inside and at the entrance to the Port of Sines, one of the major trade and economic gateways of the Iberian Peninsula, located on the Portuguese west coast. In situ measurements using pressure sensors, wave buoy data, and results from two numerical wave propagation models

The main goal of this paper is to develop a photogrammetric method in order to obtain arobust tool for damage assessment and quantification of rubble-mound armour layers during physicalscale model tests. With the present work, an innovative approach based on a reduced number ofdigital photos is proposed to support the identification of affected areas. This work considers twosimple digital photographs recording the instants before and after the completion of the physicaltest. Mathematical techniques were considered in the development of the procedures, enabling thetracking of image differences between photos. The procedures were developed using an open-sourceapplication, Scilab, nevertheless they are not platform dependent. The procedures developed enablethe location and identity of eroded areas in the breakwater armour layer, as well as the possibilityof quantifying them. This ability is confirmed through the calculation of correlation coefficients ineach step of the search for the more damaged area. It is also possible to make an assessment of themovement of armour layer units.

An aerial monitoring system was developed for the maritime structures protecting the foundation columns of the airport infrastructure of the Madeira Island Airport, in the scope of research project MEGE, to complement the already existing monitoring program of visual observations. For the aerial monitoring of the berm breakwater, with about 770 m in length, a fast data acquisition system was envisaged. Imaging techniques acquired through a high-resolution camera coupled to an unmanned aerial vehicle (UAV) were used, which allowed for a very fast and efficient automated procedure, compatible with the difficult accessibility to the structure on the seaside. Point clouds corresponding to the breakwater geometry were obtained from the set of aerial images from the camera on board of the UAV, using photogrammetric techniques. In this paper, the two complementary parts of the monitoring of this structure are described and corresponding results are shown.

This paper aims to evaluate the impact of ships on fenders during the berthing process. Physical tests and numerical simulations with MOORNAV tool were performed with versions of the GulfStream ship in still water and under a set of different conditions. A comparative analysis was made between outputs of the two models considering specific conditions. The MOORNAV application resulted in a standard deviation from the physical model of 3% to 6% in relation to the maximum force exerted on each fender.

This paper aims to evaluate the impact of ships on fenders during the berthing process. Physical tests and numerical simulations with MOORNAV tool were performed with versions of the GulfStream ship in still water and under a set of different conditions. A comparative analysis was made between outputs of the two models considering specific conditions. The MOORNAV application resulted in a standard deviation from the physical model of 3% to 6% in relation to the maximum force exerted on each fender.

Neste trabalho, descreve-se a aplicação do programa OSOM+ às obras marítimas do Porto de Sines, em especial ao quebra-mar oeste. Assim, serão apresentados resultados de comparação entre as situações observadas em 2018 e 2020 no âmbito de inspeções visuais e com drone, mediante apreciação e análise de fotografias georreferenciadas, ortomosaicos, nuvens de pontos, modelos numéricos de superfície e perfis selecionados. É também ilustrada a forma como a aplicação e base de dados ANOSOM-WEB pode ser empregue quer durante as campanhas de observação, quer em gabinete. Conclui-se este trabalho com a apresentação das vantagens da recente atualização da metodologia e do que se julga ser a sua importância na tomada de decisões sobre a necessidade ou não de realizar obras de manutenção e/ou reparação nestas estruturas, ou similares.

Os mapas de risco costeiro, integrados em modelos de risco, são excelentes ferramentas de apoio à tomada de decisão no âmbito da gestão e proteção costeira em situações normais e de emergência [1], ajudando aproteger as populações e infraestruturas em risco de inundação costeira e galgamento oceânico proteger as populações e infraestruturas em risco de inundação costeira e galgamento oceânico.

SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.

A autoridade portuária do arquipélago dos Açores, Portos dos Açores, SA, identificou a necessidade de dispor de um sistema de alerta precoce para os riscos associados à agitação marítima, nomeadamente os relacionados com os galgamentos costeiros e com os navios amarrados. No âmbito do Projeto ECOMARPORT, associaram-se com a Universidade dos Açores e o LNEC para o desenvolvimento de três novos protótipos do sistema HIDRALERTApara os portos de S. Roque do Pico, Madalena do Pico e Praia da Vitória. Os novos protótipos têm, para além da previsão de eventos de galgamento das proteções portuárias, a capacidade de prever esforços e movimentos de navios amarrados. As situações de emergência podem ser previstas, permitindo que as autoridades portuárias possam tomar medidas de mitigação para evitar a perda de vidas e minimizar os danos.

Early warning systems (EWS) are fundamental tool to reduce risks in coastal areas since they provide in advance the necessary information for the responsible authorities to mitigate the effects of possible emergency situation due to storms.

The case studies are Costa da Caparica coastal area and Ericeira port, both on the West Portuguese Coast.

The To-SEAlert project (Fortes et al. 2019) aims to include a set of tools/methodologies into the Early Warning Systems (EWS) HIDRALERTA, (Poseiro, 2019, Fortes et al., 2021, Santos et al., 2020, Zózimo et al., 2021, Ferreira, et al. 2021a) to make it more efficient reliable and robust.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Realização de ensaios em modelo físico reduzido 3D para a avaliação da estabilidade do quebra-mar destacado do Porto Inlgês, Maio, Cabo-Verde

N/A

Adverse sea conditions can cause emergency situations associated to wave overtopping, which endanger the safety of people and goods, with negative impacts for society, the economy and the environment. Therefore, a methodology to assess the overtopping risk in port and coastal areas is essential for a proper planning and management of these areas.The Portuguese National Laboratory for Civil Engineering (LNEC) has been developing the HIDRALERTA system, an integrated decision-support tool for port and coastal management, which focus in preventing and supporting the management of emergency situations and the long-term planning of interventions in the study areas. It enables the user to calculate the risk for various port and coastal activities, starting with the characterization of sea-waves, wind field and tide levels at the study regions.HIDRALERTA was already tested at different places in Portugal: Costa da Caparica beach, in Almada, and port of Praia da Vitória, in the Azores. However, in both cases, the evaluation of wave overtopping / flooding consequences was carried out using a quite simple approach. In fact, such consequences were assessed only at a global and qualitative level, based on information provided by the responsible authorities.This paper aims at testing a quantitative methodology to evaluate overtopping consequences: the Analytic Network Process (ANP). This methodology was proposed to solve complex decision-making problems and its objective is to calculate the priorities among decision elements which will define their final weights on the consequences. The ANP approach can produce interdependencies between criteria and compute the respective weight of each criterion. Such a network model with dependence and feedback improves the priorities derived from judgements and makes prediction more accurate. So, the ANP allows comparison among clusters of elements. Furthermore, in this methodology we take into account the impacts of alternatives on the importance of criteria, by normalizing the comparison matrix. Thus, the given alternatives can influence the ranking of criteria.Application of the ANP methodology to the case study of Praia da Vitória port is presented and a consequences level map is obtained.

Apresenta-se um novo sistema de alerta para navios amarrados em portos que se encontra em desenvolvimento no Laboratório Nacional de Engenharia Civil. O sistema SWAMS_ALERTA é um sistema de previsão e alerta baseado na avaliação do risco associado ao comportamento de navios amarrados em zonas portuárias.Os riscos associados a navios amarrados decorrem de movimentos excessivos, quer no plano horizontal, quer no plano vertical. Estes movimentos podem condicionar as atividades portuárias, nomeadamente cargas e descargas, mas em casos extremos podem levar à ocorrência de situações de emergência, tais como rotura de cabos, rotura de cabeços de amarração ou até colisões com o cais. As consequências deste tipo de situações envolvem sempre grandes prejuízos materiais e por vezes humanos.O sistema SWAMS_ALERTA utiliza as medições e previsões de agitação marítima para a determinação dos seus efeitos em termos de movimentos nos seis graus de liberdade e forças nas amarras e defensas quando o navio se encontra estacionado no cais. Para tal, o sistema recorre a uma série de modelos numéricos, interligados entre si. A comparação destes valores com valores máximos admissíveis pré-estabelecidos permite a avaliação, em tempo real, de situações de emergência e a emissão de alertas dirigidos às entidades portuárias.O sistema é constituído por 4 módulos:I

N/A

N/A

N/A

N/A

N/A