Papers
Info
Study of the turbine power output of an oscillating water column device by using a hydrodynamic - aerodynamic coupled model
The availability of clean energy of wind waves is enough to meet current demand of the world, attracting researches to find devices with good performance to extract this type of energy. The oscillating water column converter is a type of device that has been extensively studied for this purpose. This paper describes a numerical analysis of an onshore oscillating water column device taking into account hydrodynamic and aerodynamic coupling, performance curves of the turbine and air pressure control by a relief valve. The numerical analyses are carried out by the Fluinco model, based on slightly compressible flow method to solve the Navier-Stokes equations, and employing the two-step semi-implicit Taylor-Galerkin method. The aerodynamic model is based on the first law of thermodynamics applied to the air column inside the chamber and on turbines similar to Pico
Year: 2016
Number Pages:
147
Author(s): Torres, F.; Teixeira, P.; Didier, E.
Editor: Elsevier
Volume:
125.
Keywords: Air pressure control; Turbine model; Oscillating water column; Wave energy; Finite element method
Info
Força de impacto num quebra-mar vertical: comparação entre um modelo numérico SPH e formulações empiricas
O conhecimento dos esforços resultantes da interacção de uma onda com um quebra-mar verticaltorna-se essencial no dimensionamento deste tipo de estruturas. No presente trabalho, o modelo numérico SPHyCE, baseado numa metodologia de tipo SPH - Smoothed Particle Hydrodynamics, é utilizado para o cálculo das forças num quebra-mar vertical. Para analisar a evolução das forças de impacto foram consideradas várias condições de profundidade no pé da estrutura e de altura de onda incidente abrangendo diferentes regimes de forças. A comparação dos resultados do modelo numérico com os das formulações empíricas permitiu verificar que as forças previstas são semelhantes para os casos de regime de onda parcialmente estacionária. No entanto, para o regime de forças de impacto, existem diferenças que se devem a diversos factores: i) a rebentação da onda no modelo SPHyCE pode não corresponder necessariamente à forma de rebentação prevista nas formulações empíricas; ii) no caso da rebentação com aprisionamento de ar, cuja influência no valor das forças é relevante, o modelo numérico atinge o seu limite de aplicação, pois não integra o ar e não existem formulações aplicáveis; iii) as formulações empíricas aplicáveis com rebentação dão valores claramente por excesso.
Year: 2015
Number Pages:
3-26pp.
Author(s): Didier, E.; Rodrigues, A.; Neves, M. G.; Neves, D. R.; Dias, J.
: Revista Iberoamericana de Ingeniería Mecánica
Editor: UNED
Volume:
Vol. 19, N.º 2.
Keywords: Formulações empíricas; Interacção onda-estrutura; Modelação numérica; Quebra-mar vertical; Smoothed Particle Hydrodynamics; Forças de impacto
Info
Physical modelling as a fundamental tool for the design of harbours and maritime structures
In this paper, a brief description of the role of physical modelling to support the design of harbours and maritime structures is presented, followed by an example of the tests carried out for the studies of the expansion of Rabo de Peixe fi shing harbour, at São Miguel
Year: 2015
Number Pages:
135-145pp.
Author(s): Reis, M. T.; Silva, L. G.; Neves, M. G.; Lemos, R.; Capitão, R.; Fortes, C. J. E. M.
: PIANC Yearbook 2014
Keywords: Rabo de peixe harbour; Maritime structures; Harbours; Physical modelling
Info
Propuesta de estudio de la morfología determinada por el oleaje en playas fluviales. "La Concordia" en el río Uruguay, un caso práctico
Tanto el perfil como la forma en planta de las playas fluviales vienen establecidos por numerosos factoresentre los que cabría destacar las características del sedimento y la dirección y módulo de la velocidad de la corriente en el río. Sin embargo, en ciertos casos, lejos incluso de su estuario o desembocadura, esta morfología puede estar determinada principalmente por la incidencia del oleaje pese a no tratarse de un entorno marítimo.Se presenta aquí una metodología cualitativa que nos permitirá reconocer los aspectos que influyen en la existencia de este tipo de morfologías. Para ello, se estudiará un caso particular, el de la playa de La Concordia ubicada en la margen izquierda del río Uruguay a 70 km de su desembocadura en el estuario del Rio de la Plata. Asimismo se analizará la forma en planta y se verificará que la misma está determinada por la acción del oleaje.
Year: 2015
Number Pages:
49
Author(s): Muñoz-Perez, J.; Solari, S.; Teixeira, L; Alonso, R.; Neves, M. G.
: Geo-temas
Volume:
15.
Keywords: Oleaje; Difracción; Refracción; Playas fluviales
Info
Sinking of concrete modules into a sandy seabed: a case study
Three submerged coastal structures on the sandy seabed at SantaMaria delMar (SMM) Beach in Southwest Spain were monitored during the sixmonths after installation, starting inNovember of 2005. The monitoring evaluated the self-burial phenomenon of the 40 precast modular concrete elements of the three structures. Assessment included scouring around the structures, their vertical movement, the sinking velocity of the modules and the resulting beach profiles. Pressure sensors and precision topographies permitted continuous monitoring of the self-burial process for the first time in a full-scale case. Comparison of two bathymetries (one performed immediately prior to installation and another performed six months after installation) indicated slight accretion of the seabed,whereas intermediate topographic surveys indicated extensive scouring around the structures. The three structures began sinking into the sandy bottomplatform immediately after placement and continued until they reached the rocky bottom. This study implemented a new methodology using pressure sensors attached to the concrete modules to monitor the structural sinking. Unexpectedly, the average sinking speed was extremely rapid at approximately 3
Year: 2015
Number Pages:
26
Author(s): Muñoz-Perez, J.; Khan-Mozahedy, A.B.M.; Neves, M. G.; Tejedor, B.; Gomez-Pina, G.; Campo, J.; Negro, V.
: Coastal Engineering
Volume:
99.
Keywords: Self-buried; Low crested breakwaters; Liquefaction; Scouring; Sandy seabed
Info
Stability formula and failure probability analysis of wave-dissipating blocks considering wave breaking
The effects ofwave steepness andwave breaking on the stability of wave-dissipating blocks placed on caisson breakwaters are examined by hydraulic experiments under conditions with and without wave breaking. It is confirmed that there is a clear dependence of the block stability on the wave steepness through the wave-breaking type, such as plunging and spilling breakers. The stability parameter in thespilling breaker case is larger than that in the plunging breaker case. For non-breaking wave conditions, there is no effect of the wave steepness. An empirical stability formula is proposed taking into account the effects of the wave steepness and the wave-breaking type. Finally, by using the stability formula, failure probabilities of the wave-dissipating blocks having a nominal diameter are evaluated by the first-orderreliability method of the Level II reliability analysis.
Year: 2015
Number Pages:
45-54pp.
Author(s): Mase, H.; Yasuda, T.; Reis, M. T.; Karunarathna , H.; Yang , J.
: Journal of Ocean Engineering and Marine Energy
Editor: Springer
Volume:
Vol. 1(1).
Keywords: Failure probability; Reliability analysis; Wave-breaking effect; Stability formula; Wave-dissipating block stability
Info
Tools for forecasting and evaluation of structural risk on maritime works
This paper describes recent advances on maritime structures
Year: 2015
Number Pages:
146-158pp.
Author(s): Fortes, C. J. E. M.; Lemos, R.; Reis, M. T.; Capitão, R.; Neves, M. G.; Silva, L. G.; Poseiro, P.
: PIANC Yearbook 2014
Editor: PIANC
Keywords: ANOSOM; Maritime inspections; Warning system; Risk evaluation; Maritime structures
Info
Wave propagation on a flume: numerical simulation
This paper presents the numerical simulations done by using the waves2Foam, an OpenFOAM® library, to simulate the propagation of regular waves without breaking in a three-dimensional flume. The numerical code solves the unsteady Navier-Stokes equations and uses a Volume-of-Fluid (VoF) method to identify the free surface. A regular incident wave with a 1.5s period and 0.1m wave height, was considered. This is one of the conditions from the wide range of wave flume tests conducted at the National Laboratory for Civil Engineering (LNEC) whose objective was to analyze the hydrodynamics of wave transformation and wave breaking for different incident conditions over a variable bathymetry. Comparisons are made between the numerical and the experimental results. These comparisons include time-series of wave-gauges records at several locations along the flume and the corresponding amplitude spectra; significant wave height and average period evolution along the flume; time-series of the velocity components at one section of the flume, measured at the middle of the water column; and hodograph representation of the velocity components, in the middle of the water column, in the xy, xz, and yz planes along the flume. It was found that the numerical results obtained are close to the experimental data. The observed differences are attributable to numerical inaccuracies as well as the differences between the wave generation method in the numerical and experimental tests.
Year: 2015
Number Pages:
95-102pp.
Author(s): Conde, J. M.; Roberto, P.T.S; Fortes, C. J. E. M.
: Engenharia Térmica (Thermal Engineering)
Volume:
Vol 14 - nº 1.
Keywords: Wave propagation; Free-surface; OpenFOAM; Navier
Info
A modelação física no apoio ao projeto de obras marítimas
Neste artigo, apresenta-se uma breve descrição do papel da modelação física no apoio ao projeto de obras marítimas, seguida de um exemplo de ensaios realizados no âmbito da ampliação do porto de pesca de Rabo de Peixe, São Miguel
Year: 2014
Number Pages:
26-30pp.
Author(s): Fortes, C. J. E. M.; Reis, M. T.; Neves, M. G.; Silva, L. G.; Capitão, R.; Lemos, R.
: Construção Magazine
Volume:
Nº 62.
Info
Avaliação da probabilidade de ocorrência de galgamentos não admissíveis no posto 2 do Terminal de granéis líquidos do porto de Sines
Descrevem-se os procedimentos para avaliar o caudal médio galgado sobre um trecho de um quebra-mar de taludesa partir das caraterísticas da agitação marítima incidente no mesmo trecho. Apresenta-se uma metodologia paraestimação de valores extremos daquele caudal, partindo das séries temporais da mesma variável, e ilustram-se essesprocedimentos num trecho do molhe oeste do porto de Sines que protege o posto 2 do terminal de granéis líquidos daação da agitação marítima. Este regime de extremos do caudal médio galgado é fundamental para a avaliação do riscode ocorrência de galgamentos não admissíveis no posto 2.
Year: 2014
Number Pages:
95-113pp.
Author(s): Reis, M. T.; Santos, J. A.; Capitão, R.; Neves, D. R.; Fortes, C. J. E. M.
: Territorium
Volume:
21.
Keywords: Porto de sines; Caudais médios extremos; Redes neuronais; Galgamento
|
Comunicação
Info
Renaturalização da zona do Lugar de Baixo, Madeira
O presente trabalho descreve a aplicação do modelo numérico COULWAVE ao estudo da propagação de ondas na zona da Praia do Lugar de Baixo, Madeira, com vista a simular as características hidrodinâmicas na zona de estudo permitindo analisar as alturas de ondas, zona de rebentação e reflexão da onda junto à costa. O objetivo final é propor soluções para a renaturalização desta zona e o melhoramento das condições de surf.
Year: 2018
Number Pages:
226-229pp.
Author(s): Castro, J.; Mendonça, A. C.; Fortes, C. J. E. M.
Editor: Instituto Hidrográfico
Keywords: Reflexão; Rebentação; COULWAVE; Madeira; Surf
Info
Survey of a three-dimensional scale model of a rubble-mound breakwater using different 3D surface modelling techniques
The objective of this paper is to describe and compare the use of different high-resolution survey techniques to create and analyse 3D surface models made up of point clouds, using open-source and freeware post-processing tools. Within this framework, several tests were conducted on a three-dimensional scale model of a breakwater, with surveys performed by a smartphone, the Microsoft® Kinect® sensor and a UAV camera. All the tests were conducted for a physical model placed in an empty wave tank. For this comparison, a number of post-processing software were used: the Microsoft Kinect Fusion Application, Visual SFM and MicMac, all freeware software. The clouds of points were compared using the CloudCompare freeware software and the Golden Software Surfer commercial software.In order to obtain a clear comparison between these tools (i.e., to better evaluate accuracy and associated errors), all the point clouds (with RGB colour information) were aligned with data coming from a survey used to coordinate some points in the model (Ground Control Points). All the clouds were compared with a corrected cloud based upon coordinated points painted on the concrete floor of the wave tank.The specific experimental conditions needed for using each of these methodologies were investigated and classified.
Year: 2018
Number Pages:
10p.
Author(s): Lemos, R.; Henriques, M. J.; Capitão, R.; Fortes, C. J. E. M.; Jónatas, R.; Silva, H.
Editor: IHCantabria
Keywords: 3D surface models; Kinect sensor; Photogrammetric techniques; Damage evolution
Info
SWAMS: Novos desenvolvimentos
Nesta comunicação apresenta-se os novos desenvolvimentos que estão em curso no sistema SWAMS ALERT, que é um sistema previsão, alerta e avaliação de risco de eventos perigosos associados à navegação em áreas portuárias e ao comportamento dos navios amarrados.O sistema usa as características da agitação marítima previstas para determinar os seus efeitos em termos de forças em amarras e defensas, bem como de movimentos de um navio amarrado. Para isso, o sistema utiliza um conjunto de modelos numéricos. O sistema consiste em quatro módulos: I - Características da agitação marítima; II - Navegação em áreas portuárias; III - Avaliação de Risco e IV - Sistema de Alerta. A interface do sistema é através de uma plataforma web totalmente interativa e amigável.Ilustra-se a aplicação deste sistema ao porto da Praia da Vitória.
Year: 2018
Number Pages:
95-98pp.
Author(s): Pinheiro, L.; Lopes, P.; Poseiro, P.; Fortes, C. J. E. M.; Santos, J. A.
Editor: Instituto Hidrográfico
Keywords: Sistema de alerta; Previsão em tempo real; Navegação
Info
Systematic observation of maritime works. The new OSOM+
This paper presents recent new features of the Systematic Observation of Maritime Works (OSOM+) program, under development at LNEC since 1986, for using in an extensive number of maritime structures of mainland Portugal. Those functionalities are illustrated with applications to a real case scenario (the port of Ericeira) and by indicating their added-value on the existing methodology.
Year: 2018
Number Pages:
466-469pp.
Author(s): Capitão, R.; Lemos, R.; Henriques, M. J.; Fortes, C. J. E. M.; Neves, M. G.; Silva, L. G.; Reis, M. T. L. G. V.
Editor: Instituto Hidrográfico
Keywords: Drones; VANT; Serial surveys; Maritime works; Systematic observation
Info
The
It is common for the local sea state in coastal waters to be a complex combination of waves due to local and recent wind (the "sea") and long period waves resulting from earlier weather systems, which have travelled many 100s of km with little attenuation of these very long waves (the "swell"). Sea and swell may have very different directions and periods.
Year: 2018
Author(s): Bruce, T.; Franco, L.; Romano, A.; Menendez, M.; Reis, M. T. L. G. V.; Pinheiro, L.; Van der Meer, J.
Keywords: Overtopping; Bimodal wave; Crossover project
Info
A 3D RANS-VOF wave tank for oscillating water column device studies
This paper presents the validation of a wave maker with active absorption method implemented in FLUENT® RANS-VOF code for modelling long time series of waves propagating and interacting with coastal structures, more specifically, with Oscillating Water Column devices, to cancel out the reflected wave that reaches the wave maker. Verification of the numerical technique was performed in a 3D wave tank in which a technique of multiple active absorption wave makers was used. Good results were obtained in quasi-3D and fully-3D applications showing that active absorption should be used for modelling accurately the complex interaction between wave and coastal structures, in the present case, with an oscillating water column device integrated in a vertical breakwater.
Year: 2017
Number Pages:
710-721pp.
Author(s): Teixeira, P.; Didier, E.; Neves, M. G.
Editor: CIMNE
Keywords: Wave dynamic absorption; RANS-VOF; Numerical modelling; Oscillating water column
Info
A web platform for the systematic monitoring of coastal structures
Due to both its geographic location and maritime importance, Portugal is equipped with a large number of port infrastructures, the majority of which built for goals such as to guarantee the tranquility of the sheltered areas of the harbour basins, to help controlling sedimentation by guiding the currents, to protect water taken from thermoelectric plants, amongst others. In Portugal, the most common of these structures is the rubblemound breakwater. Due to its characteristics, maintenance or repair works are common throughout its lifetime. However, the need for these repair works should be evaluated in advance, in order to avoid significant costs associated to those works or, even worse, the collapse of the structure. It is therefore quite important to evaluate the Present Condition of the structure, as well its Evolution and Risk Conditions. The Present Condition is periodically checked on-site and all relevant data gathered is recorded, by filling in inspection forms, in order to perform further comparisons and analyses with previous inspections of the structure, as to eventually characterize Evolution and Risk conditions. To expedite all this process and prevent likely occurrence of errors in data collection, a monitoring tool, supported through a map-based online geographic information system (WebGIS) was developed, enabling the georeferencing of the structures concerned. This system adapts to the location of the user
Year: 2017
Number Pages:
102-111pp..
Author(s): Maia, A.; Rodrigues, A.; Lemos, R.; Capitão, R.; Fortes, C. J. E. M.
Editor: SCITEPRESS
Keywords: Mobile devices; Georeferencing; Adaptation; Risk assessment; Coastal structures; Geographic information system
Info
Air injection effect on wave propagation: experimental modelling
The air entrainment effect on wave breaking is of the highest importance for the wave energy dissipation. Wave breaking is a complex phenomenon with several physical processes, making it difficult to quantify the contribution of the air in the energy dissipation process. This study presents a different approach where the wave propagation is exposed to air injected in the bottom of a wave flume. The experiment allows studying in a controlled environment the direct effect of the air bubbles in the wave propagation. The measurements show the free surface elevations and velocity profiles at two sections of the wave flume. The turbulence effect of the air injection on the wave propagation was evaluated. The results show differences for the three types of air injection that were tested. The air injection rate of each orifice is an important factor for the wave dissipation. The wave heights were found to decrease due to the air injection. The Turbulent Kinetic Energy shows an increase along the water column and on the downstream direction of the flume.
Year: 2017
Number Pages:
11p.
Author(s): Neves, D. R.; Pires Silva, A.; Siebring, A.; Fortes, C. J. E. M.; Matos, J.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Wave dissipation; Wave flume; Turbulence; Wave propagation; Air bubbles
Info
Análise de imagem para estudo do emulsionamento de ar na rebentação de onda
Apresenta-se nesta comunicação uma técnica baseada em análise de imagem para a medição e caraterização da concentração de ar produzida no processo de rebentação de onda. Para este efeito, realizaram-se filmagens dos ensaios num canal de ondas no Laboratório Nacional de Engenharia Civil (LNEC), que reproduzem dois tipos de rebentação de onda, progressiva e mergulhante. A validação da técnica de análise de imagem é feita por dois métodos, o primeiro com recurso à injeção de bolhas de ar através de uma bomba de ar e o segundo com a medição pontual da concentração de ar com uma sonda de deteção de bolhas de ar. Os resultados, relativos aos dois tipos de rebentação de onda, mostram as concentrações de ar e a distribuição da pluma de bolhas de ar. As medições realizadas permitem quantificar e caracterizar o ar emulsionado no processo de rebentação de onda.
Year: 2017
Number Pages:
18p.
Author(s): Neves, D. R.; Pires Silva, A.; Fortes, C. J. E. M.; Matos, J.
Editor: PIANC
Keywords: Emulsionamento de ar; Rebentação de onda; Modelação física; Canal de ondas; Análise de imagem
Info
Análise hidrodinámica de um dispositivo de coluna de água oscilante near-shore usando um modelo RANS-VOF 3D
Um dispositivo de aproveitamento da energia das ondas de tipo coluna de água oscilante (CAO) near-shore (que pode se assimilar a um cilindro vertical oco com a sua parte inferior aberta e a parte superior equipada com uma turbina Wells) implementada em profundidade intermédia pequena é estudado numericamente recorrendo a um modelo RANS-VOF 3D. O modelo numérico integra técnicas de geração e absorção das ondas por batedores múltiplos que permite dispor de um tanque de onda eficiente, eliminando as ondas reflectidas e difractadas. O dispositivo de CAO near-shore é um dispositivo alternativo ao clássico dispositivo integrado em quebra-mar ou na linha de costa e ao dispositivo off-shore (assimilado a um cilindro vertical oco estabilizado por um sistema de ancoragem por cabos) e tem duas vantagens: a resposta do dispositivo é independente da direcção das ondas e pode ser facilmente afundado no fundo do mar já que o dispositivo é desenhado para ser implementado em profundida pequena (~20 m). No entanto, a proximidade do fundo e a interacção complexa onda-estrutura resultante podem interferir em termo hidrodinâmico e energético na resposta do dispositivo CAO near-shore, comparativamente a um dispositivo off-shore. O artigo apresenta os primeiros resultados deste projecto através da análise pormenorizada de um caso de agitação marítima. Também, permite evidenciar e prever respostas diferentes do dispositivo CAO near-shore de um dispositivo clássico off-shore através da analise das series temporais de elevação de superfície livre, do caudal na turbina, da pressão na câmara-de-ar da CAO, da potência pneumática e dos vectores e campos de velocidade e de vorticidade ao redor e dentro do dispositivo.
Year: 2017
Number Pages:
10p.
Author(s): Didier, E.; Teixeira, P.; Neves, M. G.
Editor: Faculdade de Ciências e Tecnologia. Universidade Nova de Lisboa
Keywords: Near-shore; RANS-VOF; Modelação numérica; Coluna de água oscilante
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Estudo dos sistemas de esvaziamento e enchimento das docas secas do estaleiro naval da Margueira. Sistema de esvaziamento.
N/A
Year: 1967
Author(s): Martins, R. B.
Info
Estudo em modelo de obras do porto de Leixões. Ensaios de Estabilidade
N/A
Year: 1967
Author(s): Vera-Cruz, D.
Info
Para o estudo das ondas na rebentação. O espraiamento
N/A
Year: 1967
Number Pages:
33 pp.
Author(s): Ramos, F. S.
Info
Ponte cais do Malembo. Obras de abrigo. Ensaios de agitação
N/A
Year: 1967
Author(s): Vera-Cruz, D.; Morais, C. C.
Info
Estudo da agitação do porto de Vilamoura
N/A
Year: 1966
Author(s): Morais, C. C.
Info
Estudo das soluções mais convenientes para os problemas de erosão costeira
N/A
Year: 1966
Author(s): Abecasis, F.
Info
Prolongamento do molhe de Ponta Delgada. Ensaios de agitação.
N/A
Year: 1966
Author(s): Vera-Cruz, D.
Info
Ensaio em modelo do molhe de Porto Santo.
N/A
Year: 1965
Author(s): Vera-Cruz, D.
Info
Ensaio em modelo reduzido do porto de Angra do Heroísmo. Comparação sumária de diferentes soluções. Ensaios de agitação.
N/A
Year: 1965
Author(s): Vera-Cruz, D.
Info
Estudo da agitação da doca de Pedrouços.
N/A
Year: 1965
Author(s): Vera-Cruz, D.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|