Publications

In the framework of a research project entitled

Neste trabalho, descreve-se a metodologia desenvolvida para a avaliação do risco associado à ocorrência de galgamentos de estruturas portuárias e costeiras que foi implementada no sistema integrado de apoio à decisão na gestão portuária e costeira, GUIOMAR.Componente básica desta metodologia é a caracterização da agitação marítima incidente no trecho da estrutura em estudo e a estimação dos valores correspondentes do caudal médio galgado por unidade de comprimento do coroamento daquela estrutura. A determinação da agitação marítima é efetuada recorrendo a uma metodologia de acoplamento de modelos numéricos de propagação de ondas, com base em dados de agitação marítima provenientes de bóias ou de modelos regionais de previsão da agitação. O cálculo dos galgamentos é efetuado com recurso a uma ferramenta baseada na análise de redes neuronais.A avaliação simplificada do risco dos galgamentos aqui apresentada resulta da combinação dos valores da probabilidade e das consequências associados à ocorrência de caudais médios galgados que ultrapassam um determinado limiar de caudal galgado. Embora a definição deste limiar dependa das consequências dos galgamentos para a zona em estudo, considera-se apenas um valor para as consequências da ultrapassagem do limiar fixado, sem refletir a expectável variação dos prejuízos com o valor do caudal galgado. A probabilidade de excedência do limiar é determinada calculando o quociente entre o número de estados de agitação marítima incidentes na estrutura em que tal ultrapassagem ocorreu pelo número total de estados de agitação marítima incidentes na zona em estudo.Uma vez obtido o valor do risco é possível representar graficamente o grau de risco e o grau de aceitabilidade desse mesmo risco em cada zona e estrutura estudada. Esta informação é crucial do ponto de vista de planeamento a longo prazo de intervenções em zonas portuárias ou costeiras .Testou-se a metodologia com três trechos distintos de estruturas de proteção costeira ou portuária existentes na baía da Praia da Vitória, Ilha Terceira, Açores, onde se localiza o porto da Praia da Vitória. Os trechos estudados são: a secção do molhe sul do porto que protege diretamente o cais 12, um trecho da proteção marginal da baía diretamente em frente à entrada da baía da Praia da Vitória e o trecho corresponde ao perfil corrente do enraizamento do esporão existente na mesma zona. Em qualquer dos trechos estudados, avaliou-se o risco associado ao galgamento provocado pela agitação marítima incidente, sendo esta caraterizada pelas previsões correspondentes aos anos de 2009 e de 2010.Verificou-se que a metodologia aqui apresentada é simples e eficaz e que pode ser facilmente estendida a outros tipos de risco (navegação, inundação, etc.). Mais ainda, a metodologia agora implementada no sistema GUIOMAR constitui mais um passo e um contributo valioso no sentido de o tornar um sistema mais robusto e eficaz de apoio à gestão portuária e costeira.

This work presents the new developments and the validation of a SmoothedParticle Hydrodynamics (SPH) numerical model used in the NationalLaboratory of Civil Engineering (Laboratório Nacional de Engenharia Civil- LNEC) for studies in coastal engineering processes. Although the modelrequires a high CPU time, it proved to be very promising in the simulationof complex flows, such as the wave-structure interaction and the wavebreaking phenomenon. For the SPH model validation, physical modelingtests were performed in one LNEC

The vortex-induced vibration (VIV) phenomenon has drawn the attention ofresearchers in Engineering for several decades. An example is the riser usedfor petroleum exploration, in which it is subjected to marine flows that maycause oscillations due to vortex shedding. In this paper, numerical analysesof the phenomena that occur in the interaction among flows at low Reynoldsnumbers and elastically mounted cylinders are presented. The simulation iscarried out by using the numerical model Ifeinco that uses a semi-implicittwo-step Taylor-Galerkin method to discretize the Navier-Stokes equationsand the arbitrary Lagrangean-Eulerian formulation to follow the cylindermotion. The rigid body motion description is calculated by using theNewmark method. Firstly, the characteristics of the vortex generationprocess for the fixed cylinder are analyzed. In this case, the Strouhalnumber, the mean drag and the RMS lift coefficients for Reynolds numbersranging from 90 to 140 are shown. Afterwards, an analysis of a flexiblesupported cylinder (with a spring and a damper) in transverse directionsubject to flows with Reynolds numbers ranging from 90 to 140 is carriedout. The cylinder displacement and the vibration frequencies are studied;the synchronization between the vortex shedding and the vibrationfrequency (lock-in) is analyzed. Similar results to the experimental onesdeveloped by Anagnostopoulos and Bearman (1992) were obtained in thisstudy.

Coastal waters are an integral part of the natural environment. Careful planning and management is needed to protect andconserve them, and to ensure that the water supply is useful for a variety of uses.Submarine outfalls for effluent disposal are used to ensure that the water quality is maintained and that the environmental valuesand water uses are protected.Decision on treatment and disposal is based on objectives set by national and international legislation and on coastal and maritimeuses identification.An operational forecast methodology is proposed for the management of submarine outfalls providing information to deal with themarine environment problems and to satisfy needs at different levels for coastal communities.From a management perspective the forecast methodology will support decision making by predicting where a discharged plume islikely to be transported over a few days from its last known location.Short-term forecasts of maritime climate and hydrological conditions along with foreseen effluent characteristics (depending onseasons and population equivalent) of the studied region are used for an accurate estimation of the effluent plume advection anddiffusion processes near the coastline.The operational forecast methodology, continuously evaluating the plume behavior and its relation with the protection perimeter(identified through a coastal usage map), allows the implementation of a precautionary and adjustable management of thesubmarine outfall. Corrective measures (e.g. increase dilution, increase the number of outlets, increase outflow speed) may avoidpossible operational disruptions and minimize potential water quality impacts.To illustrate the application of the procedure, a submarine outfall case study located in the Portuguese coast is analysed.

Neste trabalho é analisado um dispositivo de extração de energia das ondas do tipo coluna de água oscilante sob a ação de ondas regulares de diferentes períodos. São realizadas variações no comprimento submerso da parede frontal e no comprimento da câmara. Para tal é utilizado o código numérico FLUINCO, o qual é baseado nas equações RANS e a discretização é realizada utilizando o método semi-implícito de Taylor-Galerkin de dois passos. Uma formulação lagrangeana-euleriana arbitrária (ALE) é utilizada para permitir a solução de problemas que envolvem movimentos da superfície livre. Alguns resultados são comparados com os obtidos utilizando o programa FLUENT. São apresentados a amplificação (relação entre a altura da onda incidente a e dentro da câmara), distribuição das velocidades e vetores de velocidade.

This paper describes an application of theBoussinesq-type COULWAVE model to study the wavehydrodynamics in the vicinity of a multi-functional artificialreef (MFAR). This reef is under investigation and consists ofa supplementary protection solution for the Leirosa sanddune system located at South of Figueira da Foz, on thePortugueseWest coast. Such installation near the coastline isexpected to contribute to enhance the surfing conditions inthe area, protect the sand dune system in the surroundings ofLeirosa beach, and increase its environmental value.Numerical calculations with the COULWAVE model wereperformed for four test cases, considering two reef geometries(differing in the reef angle) and two incident waveconditions (storm condition and a common wave condition).Comparisons between the results obtained, in terms of waveheights and breaking line positions allow us to assess theinfluence of the reef on the hydrodynamics near the beachand around the reef. Moreover, the reef performance wasanalysed in terms of surfability and coastal protection. Thesurfability parameters (breaker height, Iribarren number andpeel angle) were calculated for each test case using thenumerical wave heights, wave directions and wave breakingpositions. Comparisons of parameters allow characterizingthe most appropriate configuration of the reef to improve thesurfing conditions in the study area. A methodology basedon numerical free surface elevations and horizontal velocitycomponents was developed to calculate wave directions,since this is not a direct output of the COULWAVE model.Concerning coastal protection, analyses of the mean currentsaround the reef were used together with observationsof the velocity cells near the shoreline as an indication of thesediment transport.

The knowledge of wave transformation and breaking characteristics nearcoastline is essential for the nearshore hydrodynamics and the design ofcoastal structures. This paper describes a wide range of wave flume testsperformed at the National Laboratory for Civil Engineering (LNEC),located in Lisbon (Portugal), which main objective was to study waveshoaling and breaking over a set of different gentle slopes for severalincident waves and thus to contribute for a better understand of thehydrodynamics of wave transformation.The experimental conditions, the measurement equipment, the incidentwave characteristics, the type of measurements performed (free surfaceelevation and particle velocity) and the data obtained are described. Timeand spectral analysis based upon the measured data are also performed andpresented. For a regular wave with a period of 1.5s and a height of 0.1m arepresented and discussed the following results: free surface elevation atselected sections along the flume; the spectral analysis; the significant waveheight and average period along the flume; the particle velocity componentsat different locations along the flume; the average, maximum and minimumvalues of the longitudinal component of the velocity along the flume; thetwo dimensional distribution of the three components of the velocity; andlongitudinal velocity component vertical profiles.

Neste trabalho, analisa-se o desempenho do modelo numérico SWAN (Booij et al., 1999) na caracterização da agitação marítima na zona costeira da praia da Amoreira, em Aljezur, Algarve. Para este efeito, efectua-se uma análise comparativa entre as medições de agitação marítima realizadas na Praia da Amoreira e as estimativas produzidas por esse modelo. Assim, partindo dos resultados do modelo regional de previsão da agitação marítima, WAVEWATCH III, Tolman (1999, 2002), para os dias em que foram realizadas as medições in-situ, efectuaram-se cálculos com o modelo SWAN, obtendo-se nos locais de medição valores de altura significativa, período de pico e período médio. A comparação das simulações numéricas com os dados medidos permitiu avaliar o desempenho do modelo numérico e reforçar a confiança que já existia neste modelo na sua utilização em estudos de morfodinâmica e dinâmica costeira.

N/A

Nowadays, renewable energy is a topic widely discussed in scientific community. Specifically wave energy attracts attention because it has a high energy potential distributed throughout the planet. Oscillating Water Column (OWC) wave energy converter is one of the most studied devices that have promising perspectives to be installed commercially. This study aims investigating the influence of chamber sizes and turbine characteristics dimensions of an OWC device located at the southern Brazilian coast is carried out. Numerical simulations for incident waves with period T = 7 s and 10 s and height H = 1.5 m, by using the FLUENT® model, based on the finite volume method (VFM) are carried out. Efficiencies for different chamber sizes and Wells turbine characteristic relations (kt) in each incident wave are determined. The highest efficiencies were obtained by a chamber with 5 x 5 m and kt = 530 Pa.s/m³ in the case of an incident wave with T = 7s (52%), and 30 x 30 m and kt = 15 Pa.s/m³ at T = 10s (65%).

Port terminals downtimes lead to large economic losses and largely affect the port

This paper describes the physical model, experimental setup and tests performed to study the motions and forces of a ship moored to the pier A at the Leixões oil terminal, following the breakwater

HIDRALERTA is a forecast, early warning and risk assessment system for port and coastal areas that uses measurements and estimates of sea-waves and water levels to evaluate overtopping/flooding events. The calculation of the mean overtopping discharge over a maritime structure is performed through artificial neural network-based tools and/or empirical formulae. The system is developed in open source software, mainly using the Python language. This paper presents the application of HIDRALERTA system to reproduce the hurricane Lorenzo conditions and impacts at Lajes das Flores port on October 2nd 2019, the most affected port in Azores. This hurricane was regarded as the strongest storm to hit Azores in 20 years. The system predicted the expected results for the hurricane wave characteristics, as well as overtopping discharge volumes. Further validation still need to be improved with the collaboration of the local authorities and the use of historical data.

Numerical models are useful tools to predict the effects of storms in coastal areas. The objective of this work was to simulate the effects of storms in São Pedro de Moel beach by using XBeach. The nearshore sea state was obtained by propagating offshore conditions using the SWAN model. The XBeach model was divided into two setups to analyse overtopping events and coastal evolution. Sensibility tests, calibration, and validation, using information from different storms, were performed for the different setups. The results from the overtopping simulation were compared against results from an empirical formula. The comparison showed lower values obtained with the empirical formula. The coastal evolution run point out to the necessity of having better field data before and after storms to improve the model setting and accuracy.

The assessment of damage evolution in scale model tests of rubble-mound breakwaters can be achieved by comparing eroded depths and volumes between consecutive surveys. This paper focuses on damage evolution of a model of a rubble-mound breakwater and on the novelty of the non-intrusive survey methodologies such as laser scanning and Time of Flight (ToF) techniques, based on point clouds, enabling the extraction of profiles and the calculation of eroded depths and eroded volumes. The final objective of this work is to evaluate the applicability of the estimation the number of displaced armour units, using a non-dimensional damage parameter based on the calculated eroded volume.The paper will also describe the experiments conducted under the RODBreak, a project sponsored by the HYDRALAB+ Transnational Access Program, in which a stretch of a rubble-mound breakwater was built at the wave-current basin of the Leibniz University Hannover (LUH) to assess the structure behavior. Four scan surveys were conducted using a Faro Focus 3D laser scan, as well as a ToF sensor. Those surveys were carried out before and after two test series, in order to evaluate the eroded volume and profile evolution.

Neste trabalho é efetuada a validação do protótipo To-SEAlert para o porto da Ericeira. Para a validação dos resultados do modelo SWAN foram utilizados os dados de duas boias situadas ao largo da Nazaré e para a validação das previsões do sistema de cálculo do grau de risco foram simuladas as depressões Elsa e Fabien (ocorridas em dezembro de 2019) e que foram responsáveis por fortes danos na cabeça do molhe do porto da Ericeira. Verificou-se uma boa concordância entre os dados das boias e os resultados do modelo SWAN, tendo no entanto o modelo reproduzido melhor a direção média e a altura significativa do que o período de pico. Relativamente aos valores de galgamento, os resultados obtidos na simulação das depressões Elsa e Fabien estiveram em concordância com os valores referidos na literatura como causadores de danos nas estruturas.

This work aims to determine the exploitable wave energy resource at six potential sites, located in the Azores, Madeira and Sines breakwater city harbours. For that purpose, the thirdgeneration wave model SWAN is used to estimate the sea-wave conditions over the last 40 years. Boundary conditions of the sea states and wind fields are provided by the climate reanalysis datasets (ERA5). Using those results as inputs to the SWAN model, the sea-states were propagated shoreward, in order to estimate and analyse the wave climate conditions in the regions of interest. By combining the average energy flux per unit-length of wave front and the probability of occurrence of each sea state, the average exploitable annual energy per unit length of wave crest can be computed. The variability of this energy flux is described, since it is of fundamental importance for the efficiency of the Wave Energy Converters (WEC).

Former investigations on wave run-up and overtopping of (impermeable and permeable) coastal structures aimed at quantifying the influence of oblique waves on mean overtopping discharge, water layer thickness and velocities by developing empirical formulas of a reduction factor for wave obliquity,

In 2017, the RODBreak experiment was conducted. The experiment aimed at characterizing wave run-up, overtopping and damage in rubble-mound breakwaters. The reason for these experiments was the huge impact that climate can have on maritime structures, particularly in rubble mound breakwaters. In fact, the forecast sea level rise associated with more frequent and severe storms will have consequences either on the increase of wave runup, wave overtopping or on damage on existent structures since they were not design for those extreme values. However, for those climate change scenarios, little is known about the actual failure probability of such structures.Within this framework, a stretch of a rubble-mound breakwater was built in a wave basin. Under extreme wave conditions, with different incident wave angles (from 40° to 90°), a total of 49 tests were performed. Each test had different testing parameters, such as significant wave height (Hs), peak period (Tp) and wave direction. Also, for each test, different types of measurements were considered. Incident sea waves were measured with 3 arrays of 6 acoustic wave probes each as well as with isolated acoustic wave probes and 5 Acoustic Doppler Velocimeters (ADV

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A