Papers
Info
Evolução do Dano em Modelos Físicos de Quebra Mares de Talude a Partir do Volume Erodido. Aplicações
A avaliação do dano causado pela agitação incidente em modelos físicos de quebra mares de taludes pode ser realizada comparando volumes e profundidades erodidas entre levantamentos consecutivos de cada talude.Atualmente, estes levantamentos podem ser realizados de forma não intrusiva, recorrendo a técnicas fotogramétricas, a laser scan ou a sensores de posição baseados na metolodologia Time of Flight (ToF). Dependendo das condições de levantamento e da metodologia de pós-processamento das nuvens de pontos obtidas, estas técnicas permitem obter modelos tridimensionais de superfície, com elevada precisão.Em detalhe, as diferenças de volume entre os levantamentos inicial e
Year: 2023
Author(s): Lemos, R.; Mendonça, A.C.; Fortes, C. J. E. M.; MARTINS, R.; Ferrão, R.
Editor: LisWater
Keywords: Porosidade do manto; Kinect; Modelos tridimensionais de superfície; Modelo físico; Quebra-mar
Info
Implementation and Validation of SAFEPORT System at Sines Harbour
SAFEPORT safety system aims to daily reports to the Sines harbor administration, potential emergency situations regarding ships
Year: 2023
Number Pages:
215
Author(s): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.
: Defect and Diffusion Forum
Editor: Trans Tech Publications, Ltd.
Volume:
Vol. 427.
Keywords: Risk analysis; Moored ships; Wave propagation; SWAMS; SAFEPORT
Info
Implementation of the SWASH model into HIDRALERTA system
Early warning systems are an important tool for local authorities to detect emergency situations in advance and initiate the necessary safety measure. These systems often depend on numerical models to estimate wave overtopping in the affected areas. The SWASH model has shown to deliver good results in recent overtopping studies. The To-SEAlert project has the aim of increasing the efficiency, robustness and reliability of the HIDRALERTA early warning system. This study shows a first intent to implement the SWASH model to simulate wave overtopping for the Ericeira prototype. SWASH was implemented for one breakwater profile used to simulate the overtopping discharge and evaluate the associated risk levels. It was compared to the current approach used in HIDRALERTA, which resorts to a neural network trained with a physical modeling database, NN_OVERTOPPING2. Finally, both approaches were compared with previously analyzed video images of the breakwater. The results showed that SWASH generally overestimates overtopping and is not in good agreement with the video images. NN_OVERTOPPING2 has a better agreement with the video images. A possible reason for the overestimation might be the wave direction, which cannot be included in one-dimensional simulations in SWASH.
Year: 2023
Number Pages:
20-31pp..
Author(s): Manz, A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.; Garzon, J.L.
: Latin-American Journal of Computing
Editor: Zenodo
Volume:
Vol 10, nº 2.
Keywords: SWASH model; Risk reduction; Wave overtopping; Early warning system
Info
New HIDRALERTA prototypes: Peniche and Quarteira
Early Warning Systems are crucial disaster-risk-reduction strategies as they allow local authorities to prepare and implement in advance the necessary measures to avoid major destruction and risk for individuals and properties caused by storm events. HIDRALERTA is a forecast, early warning and risk assessment system for port and coastal areas that uses forecasts of sea waves and water levels to evaluate overtopping/flooding events and risks associated with the mooring of ships. The distinguishing feature of this system is that the risk assessment is based on specific parameters related to the actual risk being predicted, such as overtopping discharges, or the ship
Year: 2023
Number Pages:
17p..
Author(s): Zózimo, A. C.; Pinheiro, L.; Manz, A.; Garzon, J.L.; Fortes, C. J. E. M.; Ferreira, Ó.
: Revista Mundi Engenharia, Tecnologia e Gestão
Editor: Mundi
Volume:
Vol 8, nº 1.
Keywords: Overwash; Overtopping; HIDRALERTA; Early warning systems
Info
Numerical analysis of performance of an oscillating water column wave energy converter inserted into a composite breakwater with rubble mound foundation
In this study, performance of an oscillating water column wave energy converter inserted into a hypothetical composite breakwater with rubble mound foundation located at the southern Brazilian coast is analyzed. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes equations, is used in 2D numerical simulations by adopting the Volume of Fluid method to consider the two-phase flow (water and air). The influence of the rubble mound foundation on the pneumatic power, the run-up/down, the free surface elevation inside the chamber, and the energy balance for different incident waves are investigated. The rubble mound foundation of the composite breakwater slightly affected hydrodynamics; however, it reduced significantly the pneumatic power of the device from 7 to 15% comparing with that obtained to a vertical breakwater founded on an impermeable foundation.
Year: 2023
Author(s): Teixeira, P.; Didier, E.
: Ocean Engineering
Editor: ELSEVIER
Volume:
278 (2023) 114421.
Keywords: RANS-VoF; Rubble mound foundation; Composite breakwaters; Oscillating water column; Wave energy
Info
Performance of an oscillating water column wave energy converter integrated with three types of harbor protection structures
Oscillating water column (OWC) wave energy converters can be integrated in harbor protection structures, such as vertical, rubble mound and piled breakwaters. The interaction between the incident wave and the structure, in which the OWC device is integrated, is significantly different, since the structure of the vertical breakwater is impermeable, while that of the rubble mound breakwater is porous. The performance of the OWC device for the three configurations is analyzed for a range of wave periods from 6 to 12 s and a wave height of 1 m. The OWC device integrated into the vertical breakwater shows the best performance (maximum mean pneumatic power of 70 kW), and the mean pneumatic power is globally 3 % higher than that of the OWC device integrated into the rubble mound breakwater (maximum mean pneumatic power of 67.4 kW). The performance of the OWC device integrated into the piled breakwater shows a similar trend to the OWC device integrated into the vertical breakwater for wave periods lower than 9 s, but it has a significant loss of performance for higher wave periods.
Year: 2023
Number Pages:
63-73pp.
Author(s): Didier, E.; Teixeira, P.
: Defect and Diffusion Forum
Editor: Trans Tech Publications Ltd, Switzerland
Volume:
Vol 427.
Keywords: Vertical Breakwater; Rubble Mound Breakwater; RANS; Oscillating Water Column; Numerical Simulation
Info
A novel geometry of an onshore Oscillating Water Column wave energy converter
This study aims proposing a novel geometry of the onshore Oscillating Water Column (OWC) device to increase its efficiency. A comparison between standard OWC
Year: 2022
Author(s): Güths, A.; Teixeira, P.; Didier, E.
: Renewable Energy
Editor: Elsevier
Keywords: Numerical simulation; Renewable energy; Wave energy; Oscillating water column
Info
Amarração de navios nos terminais do porto de Sines em situações de tempestade
Este trabalho descreve a aplicação do sistema SAFEPORT no Porto de Sines, e em particular, o teste de uma das funcionalidades do sistema relacionada com otimização de operações marítimas em ambiente portuário. O SAFEPORT é um sistema de previsão e alerta de perigosassociados a navegação.A aplicação do sistema SAFEPORT permitiu a otimização dos esquemas de amarração de três navios distintos acostados em três terminais do Porto de Sines, sob as condições de agitação marítima provocadas pela tempestade Dora (4 de dezembro de 2020). Foram construídos os modelos dos três navios e analisados vários esquemas de amarração a fim de obter uma solução ótima para cada navio. Este exercício mostrou que o sistema SAFEPORT é uma ferramenta útil para apoio à decisão nos sistemas de amarração dos navios. A configuração dos cabos de amarração tem grande influência no comportamento, e consequentemente na segurança, dos navios amarrados sujeitos a situações de tempestade.
Year: 2022
Author(s): Gomes, A.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.
Editor: PIANC
Info
An estimation of the damage of scale models of breakwaters using the time of flight method
The assessment of damage evolution in scale model tests of rubble-mound breakwaters can be achieved by comparing eroded depths and volumes between consecutive surveys. Aiming to evaluate damage evolution on rubble-mound breakwater, scale model tests were recently conducted on the maritime hydraulic facilities of the National Laboratory for Civil Engineering. This paper focuses on the use of novel, non-intrusive survey methodologies such as the Time of Flight (ToF) principle technique. In this study, damage evaluation is based on the comparison of point clouds obtained before and after each test series, enabling the calculation of eroded depths and eroded volumes and the estimation of displaced units by using a non-dimensional damage parameter based on the eroded volume.
Year: 2022
Number Pages:
49-58pp..
Author(s): Lemos, R.; Fortes, C. J. E. M.; Silva, L. G.; Pinheiro, L.
: Revista Mecânica Experimental
Editor: APAET
Volume:
Nº 35, APAET (2022).
Keywords: Measuring Techniques; 3D Surveying; Breakwater; Stability
Info
Aplicação do modelo SWASH para a estimativa de galgamentos em eventos de tempestade no porto da Ericeira
Este trabalho analisa a potencialidade do modelo numérico SWASH ser implementado no protótipo do sistema HIDRALERTA para o porto da Ericeira para a estimativa do galgamento.O modelo SWASH foi aplicado a dois perfis transversais do porto da Ericeira com características geométricas distintas, diferentes orientações face à agitação incidente e com diferentes blocos de betão no manto principal. Esta comunicação foca-se nos resultados para um perfil cujo manto principal é constituído por tetrápodes. O coeficiente de Manning foi utilizado como parâmetro de calibração dos resultados do modelo SWASH, na simulação de duas tempestades, tendo como referência os resultados da ferramenta neuronal NN_OVERTOPPING2. Foram deduzidas trêsexpressões empíricas para a determinação do coeficiente de Manning com base em variáveis conhecidas, pois a possibilidade de calcular os valores dos coeficientes de Manning de forma automática é essencial para que se possa implementar o modelo SWASH no sistema HIDRALERTA.
Year: 2022
Author(s): Manz, A.; Zózimo, A. C.; Garzon, J.L.
Editor: PIANC
|
Comunicação
Info
Simulation of wave overtopping of a rubble mound breakwater using SWASH
An investigation of the applicability of the SWASH model for wave overtopping estimation of a porous structure with a recurved wall was carried out. The results demonstrate the capability of SWASH to predict with good accuracy the mean overtopping discharges when compared to data from physical model tests. Also, detailed validation of the instantaneous wave overtopping shows a reasonable agreement.Whilst free surface is well represented without considering several parametrizations, even for one-layer mode, wave overtopping is very sensitive to any variation in numerical and physical parameters. Wave overtopping simulations are very sensitive to the non-linear Forchheimer coefficient,
Year: 2017
Number Pages:
13p.
Author(s): Poseiro, P.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Suzuki , T.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Praia da Vitória harbour; Rubble mound breakwaters; SWASH model; Overtopping
Info
Survey of a two-dimensional scale model of a rubble-mound breakwater using different stereo-photogrammetric techniques
This paper focus on the study of different methodologies for surveying two-dimensional scale models of a rubble mound breakwaters.Tests were conducted in one of the LNEC
Year: 2017
Number Pages:
245-252pp.
Author(s): Lemos, R.; Henriques, M. J.; Muralha, A.; Jónatas, R.; Fortes, C. J. E. M.; Capitão, R.
Editor: LNEC
Keywords: Photogrammetry; 3D surface models; Damage evolution; Scale model tests; Maritime structures
Info
SWAMS ALERT
Este artigo descreve os mais recentes desenvolvimentos do sistema SWAMS ALERT. O sistema consiste em quatro módulos: I - Características da agitação marítima; II - Navegação em áreas portuárias; III - Avaliação de Risco e IV - Sistema de Alerta. O sistema está a ser desenvolvido e implementado numa plataforma web totalmente interativa e amigável.O sistema SWAMS ALERT usa as características da agitação marítima medidas ou previstas para determinar os seus efeitos em termos de movimento vertical excessivo de uma embarcação em manobras que entra ou sai de uma bacia portuária ou em termos de forças em amarras e defensas, bem como de movimentos de um navio amarrado. Para isso, o sistema utiliza um conjunto de modelos numéricos. A comparação dos valores calculados das variáveis relevantes com valores máximos pré-definidos permite a avaliação em tempo real de possíveis situações de emergência ou quando a segurança das operações portuárias estiver em risco e emitir avisos às autoridades competentes; e ainda a construção de mapas de risco, considerando longas séries temporais de ondas de mar medidas ou previstas ou cenários predefinidos associados a alterações climáticas ou eventos extremos.Ilustra-se a aplicação deste sistema ao porto da Praia da Vitória.
Year: 2017
Number Pages:
16p.
Author(s): Pinheiro, L.; Lopes, P.; Poseiro, P.; Fortes, C. J. E. M.; Santos, J. A.
Editor: APRH
Keywords: Agitação marítima; Amarrações; Alerta; Previsão; Navios; Risco
Info
The conundrum of specifying very low wave overtopping discharges
The design of certain seawalls / breakwaters has often been required to achieve very low target overtopping discharges when these structures protect vulnerable infrastructure or activities. The balance between economically viable protection and performance requirements is often difficult to achieve without good knowledge on low overtopping. The paucity of data in this space and the high uncertainties associated with existing methods, increase the challenge. The occurrence of a low number of overtopping waves has the consequence that any test results are substantially more affected by the inherent variation of random waves, therefore more uncertain. The physical model test results presented hereafter were successful in obtaining low to very low overtopping discharge data. For low / very low overtopping, these test data present considerable scatter relative to the latest empirical prediction. A number of repetitions was performed for conditions giving very low overtopping discharges, which illustrated the inherent uncertainty associated with low overtopping.
Year: 2017
Number Pages:
10p.
Author(s): Silva, E.; Allsop, W.; Riva, R.; Rosa-Santos, P.; Taveira-Pinto, F.; Mendonça, A. C.; Reis, M. T. L. G. V.
Editor: ICE - Institution of Civil Engineers
Keywords: Physical experiments; Breakwaters; Overtopping
Info
Towards a mobile monitoring tool for coastal structures inspection: the Ericeira rubble-mound breakwater test case
Rubble mound breakwaters (RMB) are the most common maritime structures in Portugal. Their main goal is to reduce the action of waves on the sheltered area of the structure to achieve safety conditions for ships, people and harbour activities.To account and define the need for maintenance or repair works on such structures, it is necessary to evaluate its evolution along its expected lifetime. To predict damages that may occur in those structures and evaluate its importance in terms of structural safety and functionality, it is therefore of utmost importance to follow a monitoring program on such structures. For that purpose, a monitoring mobile tool to be used onsite by the observer would be very useful, adding in this way more efficiency to the existing traditional monitoring techniques used nowadays at LNEC, where visual, systematic, observations are made to attain relevant qualitative evaluation of those structures.Hence, a responsive WebGIS system was developed (Maia et al., 2017) for assisting the observation campaigns, enabling the introduction of photos and videos, their accurate georeferencing, the automatic evaluation of the current, and evolutive, structural state of the structure, and also the checking of physical characteristics of the structure and materials.Besides briefly describing the monitoring tool, this paper focuses primarily on demonstrating its application to a real case scenario of an inspection campaign to the RMB of Ericeira,Portugal, on the 20th of April 2017.
Year: 2017
Number Pages:
221-228pp.
Author(s): Capitão, R.; Maia, A.; Lemos, R.; Rodrigues, A.; Fortes, C. J. E. M.
Editor: LNEC
Keywords: Risk assessment; Mobile app; WebGIS; Inspection; Monitoring; Breakwaters
Info
A aplicação ANOSOM_SIG como ferramenta de gestão de risco em estruturas de proteção costeira e portuária
O LNEC tem implementado, desde 1986, um programa designado por OSOM (Observação Sistemática de Obras Marítimas) para quebra-mares de talude localizados em Portugal continental. Para armazenamento, consulta e análise da informação que vai sendo recolhida sobre os diferentes quebramares no programa OSOM, desenvolveu-se no LNEC a aplicação ANOSOM (Análise de Observação Sistemática de Obras Marítimas), a qual tem vindo a ser alvo de diversas atualizações, inclusivamente o manuseamento de nuvens de pontos provenientes de levantamentos dos quebra-mares com sistema de sondador multifeixe e/ou com a ajuda de UAV. Presentemente está em desenvolvimento uma aplicação Web a, ANOSOM_SIG, a qual virá a ser utilizada como interface da base de dados ANOSOM que inclui as funcionalidades de um Sistema de Informação Geográfica (SIG), transformando-se assim, numa ferramenta de gestão de risco em estruturas de proteção costeira e portuária.O objetivo desta comunicação é descrever a aplicação ANOSOM_SIG, bem como as suas funcionalidades até agora implementadas, apresentando alguns exemplos de aplicação.
Year: 2016
Number Pages:
409-412pp.
Author(s): Lemos, R.; Silva, J.; Fortes, C. J. E. M.; Reis, M. T.; Lopes, P.
Editor: Instituto Hidrográfico
Keywords: WebSIG; Gestão de risco; Levantamentos; Observação sistemática; Quebra-mares de talude
Info
A new application of the nonlinear shallow water numerical model AMAZON to study OWC in vertical breakwaters
This paper ilustrates lhe application of a non-linear shallow water numerical model, AMAZON, to study Oscillating Water Column Wave Energy Converters (OWC-WEC) inregrated in vertical breakwaters. This application has been performed within the scope of the research project DITOWEC - Development of an Integrated Tool for Numerical Modelling of Oscillating Water Cohumn Wave Energy Converters Integrated in Vertical Breakwaters. The main objective of DITOWEC is the development of an innovative integrated tool for numerical modeling of wave propagation from offshore to nearshore, of wave-structure interaction and of the complex nonlinear hydrodynamic and aerodynamic phenomena that occur in an OWC-WEC. This development is supported by field data from PICO power plant (Azores) and from two-dimensional experimental data, from physical model tests carried out at LNEC, which are used here for AMAZON calibration/validation. A sensitivity analysis on AMAZON parameters (grid resolution and momentum adjustment factor at vertical barrier) is presented and discussed, centered on wave height obtained near and inside lhe water chamber, amplification factor and phase lag. The obtained AMAZON results are encouraging though more tests are required for different water depths, vertical openings and incoming wave periods, allowing further calibration and validation of the momentum adjustment factor.
Year: 2016
Number Pages:
509-520pp.
Author(s): Reis, M. T. L. G. V.; Mestre, R.; Neves, M. G.; Hu, K.; Dias, J.; Mendonça, A. C.; Didier, E.; Fortes, C. J. E. M.
Editor: EdiBios
Keywords: Wave energy converter; Vertical breakwater; Numerical modelling; Oscillating water column; Nonlinear shallow water
Info
Análise de dados de agitação num ponto da costa portuguesa. Implicações para o dimensionamento de quebra-mares verticais
Com base em 10 anos de dados de temporais medidos na boía ondógrafo de Sines entre os anos 2001 e 2010, analisaram-se as características de diversos parâmetros da agitação, entre as quais as alturas de onda (significativa e máxima), o período médio e a direção de agitação. Em particular estudou-se a relação entre alturas de onda máxima e alturas de onda significativa durante condições de temporal, compararam-se as relações encontradas com as propostas na literatura e usualmente aplicadas no dimensionamento de quebra-mares verticais, e analisou-se a sua influência na estabilidade dessas estruturas. Verificou-se que os coeficientes de segurança calculados com base em valores de altura máxima registada são inferiores aos calculados com a relação proposta na literatura.
Year: 2016
Number Pages:
97-100pp.
Author(s): Ferreira, R.; Neves, M. G.; Oliveira, T.; Esteves, R.
Editor: Instituto Hidrográfico
Keywords: Quebra-mar vertical; Sines; Dimensionamento; Boía ondógrafo; Altura de onda significativa; Altura de onda máxima
Info
Análise numérica do desempenho de dois dispositivos de aproveitamento de energia das ondas de tipo coluna de água oscilante
O dispositivo de aproveitamento de energia das ondas de tipo coluna de água oscilante (CAO) é um sistema que foi desenvolvido há já algumas décadas. Em condições de agitação marítima forte, pode ocorrer entrada de ar na câmara-de-ar do dispositivo, pela abertura submersa, comprometendo assim o seu rendimento. A colocação de uma parede vertical submersa, em frente ao dispositivo (UCAO), permite evitar este problema, mas altera o seu desempenho. Neste artigo, o modelo SPH é utilizado para uma primeira análise comparativa da hidrodinâmica dos dois dispositivos. Verifica-se que o factor de amplificação é fortemente condicionado pela dimensão da abertura submersa, reduzindo-se para uma abertura pequena, particularmente para os períodos de onda mais baixos. A amplitude da cava, na câmara de água e em frente ao dispositivo, é menor na configuração de UCAO que na CAO. É, assim, evidente que a UCAO reduz fortemente o risco de sucção de ar na câmara, embora reduza o factor de amplificação, quando comparada com a CAO.
Year: 2016
Number Pages:
419-422pp.
Author(s): Didier, E.; Teixeira, P.; Neves, M. G.
Editor: Instituto Hidrográfico
Keywords: Smoothed particle hydrodynamics; UCAO; CAO; Energia das ondas
Info
Application of stereo photogrammetry to physical scale model tests with mobile beds
The phenomenon of scour in the vicinity of coastal and harbour protection structures, wind farms, offshore platforms and marine outfalls is one of the causes associated with its collapse. During the design of such structures, the prediction of the maximum erosion depth located in the vicinity of the structure is of utmost importance, requiring, frequently, a validation by scale-model tests. The objective of this study is to validate the use of stereo photogrammetry in such tests. To accomplish this goal, two sets of tests were conducted: A stereo photogrammetric survey of a well-known shape molded in a sand box was carried out in order to infer on the accuracy of the technique when applied to a sand bed. The second set of tests consisted on the survey of the scour around a pile, using the stereo photogrammetric method as well as a bed profiler in order to compare the results obtained with both methods.
Year: 2016
Number Pages:
12p.
Author(s): Pedro, F.; Lemos, R.; Fortes, C. J. E. M.; Santos, J. A.
Editor: LNEC
Keywords: Stereo photogrammetry; Scale model tests; Scour
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Porto de pesca de S. Miguel - Açores. Ensaios bidimensionais de estabilidade e galgamentos dos perfis do molhe de protecção
N/A
Year: 1992
Author(s): Neves, G.; Silva, L. G.
Info
Valores Extremos da Agitação Marítima. Síntese dos dados de temporais ocorridos em Portugal Continental.
N/A
Year: 1992
Author(s): Capitão, R.; Marcos Rita, M.; Baptista, J. M.; Carvalho, M. M.
Editor: LNEC
Keywords: Agitação marítima; Portugal continental
Info
Valores extremos da agitação marítima. Figueira da Foz - Tratamento local dos dados existentes,
N/A
Year: 1992
Author(s): Carvalho, M. M.
Info
Agitação marítima na costa Portuguesa. Dados de base. Observações efectuadas na Figueira da Foz.
N/A
Year: 1991
Author(s): Santos, J. A.
Info
Ensaios bidimensionais de estabilidade e galgamentos do perfil de reparação do molhe de abrigo do porto da Baleeira (2.ª Fase).
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Ensaios bidimensionais de estabilidade e galgamentos do perfil de reparação do molhe de protecção do porto da Baleeira.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido do molhe do Funchal. Ensaios bidimensionais de estabilidade e galgamentos.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido do molhe do Funchal. Ensaios tridimensionais da cabeça do molhe.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Estudo do reforço do molhe de Vila do Porto. Ensaios bidimensionais de estabilidade e galgamentos.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Estudo em modelo reduzido do reforço do molhe do porto da Horta. Ensaios tridimensionais de estabilidade e galgamentos.
N/A
Year: 1991
Author(s): Silva, L. G.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|