Papers
Info
Projeto BSAFE4SEA - Controlo da segurança de quebra-mares através da análise de um sistema de previsão e apoio à decisão - Metodologia e resultados
Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto
Year: 2022
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Santos, J. A.; Capitão, R.; Pinheiro, L.; Lemos, R.; Andriolo, U.; Soares, F.; Henriques, M. J.; Reis, M. T. L. G. V.
Editor: INEGI/FEUP
Keywords: apoio à decisão; previsão; dano; quebra-mares de talude; BSafe4Sea
Info
Projeto TO-SEALERT. Desenvolvimentos recentes
O projeto To-SEAlert tem como objetivo a inclusão de um conjunto de ferramentas/metodologias de modo a tornar o sistema HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) mais eficiente, fiável e robusto. Essas ferramentas incluem o uso de imagens de satélite e de vídeo, de modelação numérica e física, métodos quantitativos e probabilísticos para a avaliação do risco e planeamento de emergência, para melhorar a eficiência e a confiança no sistema, bem como proporcionar a sua validação. Este projeto tem como objetivo principal a implementação de um sistema que seja capaz de apoiar as autoridades responsáveis na monitorização, prevenção e gestão de situações de emergência. Este artigo apresenta o trabalho desenvolvido recentemente nas diferentes tarefas do projeto, entre o qual se pode destacar o desenvolvimento do protótipo do sistema para a zona costeira da Costa da Caparica, a validação do protótipo do porto da Ericeira com recurso a imagens de vídeo-monitorização, o teste de modelos numéricos para o cálculo do galgamento, e a implementação de metodologias de avaliação quantitativa das consequências do risco.
Year: 2022
Author(s): Zózimo, A. C.; Fortes, C. J. E. M.; Santos, J. A.; Pinheiro, L.; Lemos, R.; Capitão, R.; Fonseca, A. M.; Roque, D.; Taborda, R.; Silva, A.; Serrazina, V.; Craveiro, J.; Reis, M. T. L. G. V.; Andriolo,
Editor: PIANC
Info
SAFEPORT-SINES. SISTEMA DE SEGURANÇA PARA O PORTO DE SINES
O SAFEPORT-SINES é um sistema de previsão e alerta para a segurança da navegação em zonas portuárias, englobando situações de emergência associadas a navios em trânsito ou amarrados, devidas a condições meteo-oceanográficas extremas. O sistema fornece previsões com 3 dias de antecedência da agitação marítima, das condições de vento e de maré, assim como dos movimentos dos navios, identificando as situações que possam ter consequências gravosas nos navios em manobra ou amarrados dentro do porto. Os níveis de risco associados baseiam-se em critérios de segurança e de operacionalidade, nomeadamente nos movimentos do navio e nos esforços nos elementos de amarração. Neste trabalho apresenta-se o sistema SAFEPORT em termos do seu desenvolvimento e arquitetura, do fluxo e tratamento de dados e do funcionamento dos modelos numéricos utilizados. Apresenta-se ainda o funcionamento da plataforma web e da aplicação móvel onde é possível consultar os parâmetros relevantes para aferir os riscos referidos
Year: 2022
Author(s): Santos, J. A.; Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Guedes Soares, C.
Editor: PIANC
Info
Safety System for Ships in Harbours
SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.
Year: 2022
Author(s): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.
Editor: E. Rizzuto and V. Ruggiero (Eds.)
Keywords: Risk assessment; storm Dora; Moored ships; Wave propagation; SWAMS; SAFEPORT
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Year: 2022
Author(s): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: PIANC
Keywords: fenders; docking; ship; Physical model
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Year: 2022
Author(s): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: TEST&E2022
Keywords: fenders; docking; ship; Physical model
Info
SEAlert project. Validation
The To-SEAlert project (Fortes et al., 2021) aims to include a set of tools/methodologies into the Early Warning System HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) to make it more efficient, reliable and robust.
Year: 2022
Author(s): Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.; Lemos, R.; Capitão, R.; Taborda, R.; Reis, M. T. L. G. V.; Andriolo, U.; Ferreira, J.; Santos, C.; DUARTE, C.M.
Editor: 16th International Conference Littoral22
Info
SHIP IMPACT ON FENDERS. NUMERICAL MODEL VALIDATION USING EXPERIMENTAL MODELLING TESTS
Marine fenders provide the necessary interface between berthing ships and berth structures (PIANC, 2002). Their absence can cause damage to either the quay or the ship or both the quay and the ship, endangering lives, and property. Due to the complex hydrodynamics around berthing ships, the characterization of the maximum force applied to an individual fender and the force distribution among a set of fenders is an essential factor in the design and safety of maritime structures and the fenders themselves, as well as for improving existing ones. This paper aims to describe a combining physical and numerical modelling of a ship impact on fenders, in order to improve the numerical modelling of this problem.Physical modelling represents a good practice in hydraulic studies, where a scale model is used to reproduce complex dynamic phenomena. However, the use of a sophisticated numerical model (or a package of numerical models) can provide a good means to evaluate the samecomplex physical processes and, in addition, to design and test a large number of alternatives in a short time span.Both types of models have their strengths and weaknesses (Gerritsen and Sutherland, 2011). Physical models provide a natural reproduction of complex non-linear physical phenomena, therefore they are well established and considered to be truthful. On the other hand, these models can be expensive and time consuming. In addition, one has to deal with the scale effect and measurement difficulties and errors are frequent. Numerical models in turn are very efficient to simulate rapidly many physical processes and the results can be easily extracted. On the other hand, to improve the reliability of their use in practice, it is necessary to calibrate several parameters through physical model measurements and field experiments. In order to take advantage of the potentiality of the two models emerged the composite modelling which is the integrated and balanced use of physical and numerical models (Gerritsen and Sutherland, 2011). This technique also costs but provides results with a better quality than those model techniques separately and increases the confidence in the use of numerical models.The physical modeling consists of a ship scaled model, whose impact on the fenders was performed in a wave basin. Various impact velocities and angles between the ship axis and the fenders alignment were used to represent possible collision conditions. The same conditions were reproduced by a numerical package. The numerical modeling was performed using MOORNAV (Santos, 1994), which estimates the ship motions and the forces exerted on the elements of the mooring system, namely mooring lines and fenders.
Year: 2022
Author(s): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.; Simão, J.; Costa, C.E.B.C.
Editor: PIANC
Keywords: Physical Modelling; Numerical Modelling; GulfStream Ship; Fenders; Composite modelling
Info
Simulação com o SAFEPORT do impacto da tempestade Célia nos navios amarrados no porto de Sines
Esta comunicação diz respeito à fase de testes do sistema SAFEPORT, tendo-se avaliado o seu desempenho numa situação de tempestade. Trata-se de um sistema desenvolvido para a segurança da navegação do porto de Sines, e, mais concretamente, nos seus terminais de Granéis Líquidos, Multiusos e Contentores. Para estes terminais, simulou-se o impacto da tempestade Célia nos esforços nos cabos de amarração de um navio petroleiro, de um navio de carga geral e de um navio porta contentores, respetivamente. O sistema SAFEPORT demonstrou ser capaz de antecipar os efeitos nos navios amarrados dos estados de agitação associados à tempestade Célia.
Year: 2022
Author(s): Gomes, A.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.
Editor: 7as Jornadas de Engenharia Hidrográfica / 2as Jornadas Luso-Espanholas de Hidrografia
Keywords: tempestade Célia; SAFEPORT; Sines; navios amarrados
Info
Structural monitoring of a breakwater using UAVs and photogrammetry
The present project addresses a problem related to the erosion effects on a breakwater barrier due to waves which leads to its degradation and that may eventually lead to lack of functionality of the structure. In the present case, the breakwater acts as a physical barrier between the Atlantic Ocean and the cargo Harbour of Leixões, in Matosinhos, Portugal, justifying the needs of health monitoring of the barrier.To monitor this structure, with a length of roughly 700 m, the need of a fast data acquisition system led to the choice of imaging techniques which allow for a fast acquisition of a diversified data set. The images were acquired using a high-resolution camera attached to an unmanned aerial vehicle (UAV), enabling a faster and more automated procedure that leads to the systematization of the process, while being compatible with the difficult accessibility of the structure, which is surrounded by sea waves. Point clouds corresponding to the breakwater
Year: 2022
Author(s): Sousa, P.; Cachaço, A.; Barros, F.; Tavares, P.; Moreira, P.; Capitão, R.; Neves, M. G.; Franco, E.
: Procedia Structural Integrity
Editor: ELSEVIER
Keywords: Breakwater monitoring; Unmanned aerial vehicle; Photogrammetry
|
Comunicação
Info
Ferramenta de apoio à gestão costeira e portuária: o sistema HIDRALERTA
Nesta comunicação, descreve-se o sistema HIDRALERTA (sistema de previsão e alerta de inundações em zonas costeiras e portuárias), sistema em ambiente SIG que tem como ideia-base a utilização de previsões da agitação marítima (a 180 horas) para calcular os seus efeitos na costa, nomeadamente em termos de galgamentos e inundações. Dos desenvolvimentos mais recentes ou em curso destacam-se: a construção de mapas de risco costeiro, a partir da análise de uma série de 30 anos de dados de agitação marítima; o desenvolvimento e aplicação do sistema de alerta e da plataforma WEB para a zona da praia de São João da Caparica e para o porto e baía da Praia da Vitória (Terceira, Açores); a aplicação, com recurso a ferramentas SIG, de metodologias quantitativas de análise das consequências do galgamento/inundação (por exemplo, o Processo de Análise Hierárquica
Year: 2015
Number Pages:
18p.
Author(s): Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.; Santos, J. A.; Garcia, T.; Capitão, R.; Pinheiro, L.; Reis, R.; Craveiro, J.; Lourenço, I.; Lopes, P.; Rodrigues, A.; Sabino, A.; Araújo, J; Ferreira, J.
Editor: Carlos Coelho et al. Associação Portuguesa de Recursos Hídricos, 2015
Keywords: Sistema HIDRALERTA; SIG; Gestão costeira e portuária; Galgamento/inundação; Avaliação de risco; Agitação marítima
Info
Influence of coastal structures in velocity fields and wave height
The behaviour of a coastal structure depends on the nearshore hydrodynamics which isdependent from waves and their interaction with the structure. The knowledge of the wave transformationand breaking characteristics close to coastal structures becomes crucial for understanding the physicalprocesses that are involved and to the design of those coastal structures. Physical models and laboratoryexperiments are important tools for a better knowledge and characterization of these phenomena. In thiswork, wave flume tests were performed to analyse the wave hydrodynamics in the vicinity of a structure,constructed with a typical slope of a rubble-mound breakwater. We measured the free surface elevationand velocities by means of resistive probes and Acoustic Doppler Velocimetry. The results enable theidentification of complex phenomena in velocity field and several changes in the velocity field and waveheight caused by set-up, reflexion and wave breaking due to the presence of the structure. The increase ofthree-dimensional effects in the vicinity of the structure was also verified. The reliable experimental datacould be used to numerical models data validation.
Year: 2015
Number Pages:
196-206pp.
Author(s): Carvalho, R.; Fortes, C. J. E. M.; Castro, M.
Keywords: Breaking waves; Surf zone; Velocity fields; Wave height; Coastal structure physical models
Info
Monitoring of the water particle velocity field near the seabed under different wave and tidal scenarios: a real case
Monitoring of water particle velocity on the sea bed is crucial to study morphological shore changes in a coast at intermediate and shallow water depth under progressive surface waves and tidal flow current. Therefore, 3-D particle velocity was monitored continuously at the bottom of Santa Maria del Mar (SMM) beach (SW Spain) by means of a single point current meter during 3 weeks in 2007 since August 28. The current meter was placed at 0.45m above the seabed in order to acquire instantaneous velocity. Wave properties (height and period) were taken from the nearby wave buoy and tidal data were taken from a tidal gauge station. Wave-induced bottom particle velocities were obtained during spring and neap tides at a d/L (depth over wave length) parameter ranging from 0.06 to 0.3. Bottom water particle velocity near the seabed ranges from 0 to ± 0.5 m/sec of which about 82% does not exceed 0.2 m/sec during monitoring. Therefore, only 18% of the surveyed water particle velocities exceed the critical Shield parameter of the beach sand (d50 = 0.23mm) which is about 0.05-0.2 depending on Reynolds number. Results show that maximum horizontal speed is obviously lower during the slack tide (high or low tide) in comparison with flood tide and ebb tide. Moreover, speed is higher during ebb tide in comparison to adjacent flood tide, with steady wave climate. Finally and among other conclusions, the maximum real values of the bottom current surveyed in SMM, as well as the Shield parameter, substantially coincide with the theoretical estimates calculated for a given wave and tidal climate.
Year: 2015
Number Pages:
275-286pp.
Author(s): Khan-Mozahedy, A.B.M.; Muñoz-Perez, J.; Neves, M. G.
Keywords: Shield parameter; Intermediate water depth; Tidal current; Tide; Bottom orbital velocity
Info
Normas e recomendações em obras portuárias
No domínio específico do projeto e construção de obras marítimas e portuárias, ao contrário de outro tipo de obras de engenharia, não existe normativa de carácter obrigatório. No entanto, embora não haja legislação específica, existem, em diversos países, recomendações nacionais que reúnem os conceitos e critérios necessários ao Projeto, de forma a melhorar a segurança e otimizar obras de grande importância económica. Normalmente as recomendações focam não só o dimensionamento e construção de obras marítimo-portuárias e costeiras, novas ou extensão das existentes, mas também a sua monitorização e manutenção. Esta comunicação resume as recomendações internacionais existentes, já que em Portugal não há normativas nem recomendações nacionais para apoio ao dimensionamento hidráulico/estrutural de obras marítimas, incluindo as específicas para o dimensionamento geotécnico de obras marítimas e uma breve comparação entre elas.
Year: 2015
Number Pages:
4p.
Author(s): Neves, M. G.
Editor: SPG
Keywords: Obras portuárias; Recomendações
Info
Photogrametric techniques to health monitoring control of breakwater's structure using Scilab
The need for shelter zones in coastal areas leads to the construction ofstructures for shore protection such as breakwaters. Its design is mainly made based insemi-empirical formulas [1] [2] [3] and in the experience of the project designer, being thee ectiveness of the breakwater carried out through physical modelling.The Harbours and Maritime Structures Division of National Laboratory (NPE, portugueseacronym) for Civil Engineering (LNEC, portuguese acronym) have developed several ex-periments in bidimensional and tridimensional models. Through this experiments, thestability of the breakwater is tested and the evaluation of damage is made by counting thearmor units dislocated (movements or displacements).This damage evaluation is currentlydone by visual inspection thus being a subjective method where some relevant movementsmay go unnoticed.
Year: 2015
Number Pages:
9p.
Author(s): Lemos, R.; Loja, M.A.R.; Rodrigues, J.C.L.; Rodrigues, J.A.S.
Editor: ECCOMAS
Keywords: Scilab; Image processing; Breakwater; Health monitoring; Photogrametry
Info
Rubble-mound breakwater armour units displacement analysis by means of digital images processing methods in scale models
Rubble-mound structures are commonly used for coastal and port protection and needs aproperly design as well as inspection and maintenance during its lifetime. The design of such breakwatersusually requires a physical scale model to be tested under different irregular incident wave and tideconditions in order to evaluate its hydraulic and structural behaviour, namely the stability of the proposeddesign. Armour units displacement and fall analysis in physical models are then a key point in the designverification and usually requires a trained technician. In this work, an algorithm made in Matlab® ispresented, consisting in digital images processing and analysis which allows automatic and precisedisplacement detection as well as its location in time and space. For a selected displacement, it is alsopossible to characterize it.
Year: 2015
Number Pages:
171-184pp.
Author(s): Courela, J.M.; Carvalho, R.; Lemos, R.; Fortes, C. J. E. M.; Leandro, J.
Keywords: Armour units displacement; Image-processing; Matlab®; Rubble-mound breakwaters
Info
A comparison of wave characteristics at Caparica beach, Portugal, using in-situ and transferred wave data
The HIDRALERTA system is current1y being implemented as a novel ear1y warning system to assess the risk of flooding in coastal and port region areas. With forecasted sea wave conditions at coastal and port areas, the system is able to determine the effects of waves in terms of wave overtopping and flooding, to compare those results with pre-specified thresholds, to build alert maps, and, if necessary, to issue alert messages. The system will be applied to two case studies: Praia da Vitória harbor, in Terceira Island, Azores, and Caparica beach, near Lisbon. One of the major inputs of this integrated system is the characterization of sea wave conditions at the site of interest, so that both measured wave data and selected numerical models are used. Numerical models, however, should be calibrated for each area of application. This paper is a contribution to get a better insight of the wave characteristics at one of those case studies, the Caparica beach, to provide adequate calibration of the mentioned numerical models. Therefore, two measurement campaigns were organized at that location, using several instruments. Data was collected and analyzed, then compared with those transferred from the Port of Lisbon wave buoy, by using numerical wave propagation models, which then enabled one to evaluate SWAN's performance and to calibrate some of its parameters. Thus, the paper describes the sea wave characterization using both in-situ data and transferred data from the Port of Lisbon wave buoy, and discusses the SWAN' s strengths and weaknesses to simulate thewave conditions measured at the two above mentioned campaigns.
Year: 2014
Number Pages:
161-170pp.
Author(s): Capitão, R.; Fortes, C. J. E. M.; Poseiro, P.
Keywords: Swan model; Wave characterization; Waming and alert system
Info
Análise do desempenho do modelo SWAN na zona da Costa da Caparica
O sistema HIDRALERTA é um sistema de previsão e alerta de risco de galgamento e inundações emáreas costeiras e portuárias, atualmente em desenvolvimento. Para obtenção das condições de agitação marítimalocais são utilizados modelos numéricos de propagação de ondas, nomeadamente o modelo SWAN. Este trabalhovisa contribuir para uma melhor compreensão das características da agitação marítima local num dos casos deestudo considerados no projeto: a praia de S. João de Caparica. Assim, utilizaram-se os dados recolhidos em duascampanhas de medição naquela zona, os quais foram depois analisados e comparados com os resultados obtidospelo modelo SWAN para o mesmo local. Foi ainda feita a comparação entre os dados fornecidos pela boia daAPL e o modelo SWAN, no local da boia. Estes procedimentos permitiram avaliar o desempenho do modeloSWAN para este local.
Year: 2014
Number Pages:
183-186pp.
Author(s): Capitão, R.; Fortes, C. J. E. M.; Poseiro, P.; Raposeiro, P.
Keywords: Swan; Agitação marítima; Sistema de previsão e alerta
Info
Aplicação do modelo numérico SWAN em locais com vegetação na Hidrovia Tiete-Paraná
Este artigo descreve a aplicação do modelo SWAN-VEG para o lago da barragem de Ilha Solteira - São Paulo, Brasil, que faz parte da Hidrovia Tietê-Paraná, a fim de analisar a influência da vegetação sobre a redução da energia das ondas perto das margens do lago. Primeiramente, o modelo é aplicado, considerando uma profundidade constante em todo o reservatório da barragem e uma pequena área de vegetação localizada junto ao paredão da barragem. São testados vários valores de velocidade e direção do vento, bem como diferentes tipos de vegetação. Em seguida, a batimetria real do lago é considerada, bem como vegetação em determinadas zonas nas margens do lago. Várias condições de vento são testadas e comparadas para as situações com e sem vegetação.
Year: 2014
Number Pages:
189-198pp.
Author(s): Vieira, A. S.; Gregório, I.C.; Fortes, C. J. E. M.; Suzuki , T.; Maciel, G.
Keywords: Vegetação; Ilha Solteira; SWAN-VEG
Info
Aplicação do processo de análise hierárquica (AHP) na avaliação das consequências de galgamento em zonas portuárias
No presente trabalho descreve-se a aplicação de uma metodologia de avaliação do risco de galgamento em zonas costeiras e portuárias ao porto de Ponta Delgada, Açores, dando especial ênfase à avaliação das consequências da ocorrência de galgamentos não admissíveis através de uma análise multicritério (Processo de Análise Hierárquica, AHP).A metodologia de avaliação do risco é efetuada em três fases: Caraterização da agitação incidente nasestruturas do porto; Cálculo do galgamento; Avaliação do risco de galgamento, que inclui a avaliação daprobabilidade de ocorrência de galgamentos (acima de um certo limiar predefinido), assim como a avaliação das consequências dessas ocorrências. Por sua vez, esta avaliação das consequências é efetuada utilizando quer um procedimento simplista de classificação das consequências em termos de graus, quer uma metodologia baseada no AHP.Os resultados da aplicação desta metodologia da avaliação do risco são apresentados sob a forma de mapas de consequências e de risco, ferramentas importantes para o planeamento de operações e de futuras intervenções no porto de Ponta Delgada.
Year: 2014
Number Pages:
421-426pp.
Author(s): Rodrigues, J.; Poseiro, P.; Reis, M. T.; Fortes, C. J. E. M.; Taveira-Pinto, F.
Keywords: Estruturas marítimas; Portos; Inundação; Galgamento; Risco
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Relato da missão a Bruxelas (12 a 14 de Dezembro de 1995) para participação na 1.ª Reunião do Grupo de Trabalho para a tarefa 4 da Acção COST 326 ("ECDIS - Maritime Transport").
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Relato da missão a Bruxelas (22 a 24 de Novembro de 1995) para participação na 2.ª Reunião da Acção Concertada "Added Value Services in VTMIS" do Programa Comunitário de I&D "TRANSPORTS".
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Relato da missão a Bruxelas (5 a 11 de Novembro de 1995).
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Relato da missão a Bruxelas (de 4 a 6 de Julho de 1995) para participação na 1.ª Reunião da Acção Concertada "Added Value Services in VTMIS" do Programa Comunitário de I&D "TRANSPORTES". Relatório efe
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Relato da missão a Roterdão (de14 a 24 de Junho de 1995) para participação na 5.ª Reunião do Comité de Gestão da Acção COST 326. Relatório efectuado para a JNICT
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Simulação da agitação marítima. Agitação incidente e reflectida. Separação pelo método das duas sondas.
N/A
Year: 1995
Author(s): Capitão, R.; Carvalho, M. M.
Info
Summary presentation of the R&D project Integrated harbour navigation control system (NATO Po-Navigation).
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Summary presentation of the R&D project Integrated harbour navigation control system (NATO Po-Navigation). Documento de divulgação do Projecto NATO Po-Navigation no estrangeiro
N/A
Year: 1995
Author(s): Covas, J. A.
Info
Valores extremos da agitação marítima. Missão a Copenhaga, Dinamarca, para participação na conferência Offshore Mechanics and Arctic Engineering de 19 a 23 de Junho de 1995.
N/A
Year: 1995
Author(s): Capitão, R.
Info
Waterborne user's requirements.
N/A
Year: 1995
Author(s): Covas, J. A.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|