Publications

This paper presents a study of the effect of a superabsorbent polymer (SAP) for autogenous shrinkage control on the uniaxial tensile behavior of steel fiber reinforced concrete (SFRC). The use of fibers and SAP potentially increases the durability of the concrete, preventing cracking by autogenous shrinkage and enhancing post-cracking behavior. Furthermore, SAP can provide further hydration for self-healing purposes and improve the ductility of the SFRC. In order to evaluate the effect of the addition of SAP in SFRC, dog-bone SFRC specimens with different dosages of superabsorbent polymers were cast and tested under uniaxial tension. The digital image correlation (DIC) technique was used to understand the effect of SAP on the steel fibers’ crack-bridging mechanisms. Surface strains and crack openings were inferred using the DIC technique. The effect of SAP and fibers on fresh and hardened concrete was individually investigated by flow tests and compressive strength tests. Autogenous shrinkage was measured in plain concrete to investigate the minimum SAP content required to mitigate autogenous shrinkage of 0.3%. The use of 0.3% SAP was also suffcient to reach multiple cracking behavior. This content of SAP completely suppressed the autogenous shrinkage with minimal side effects on compressive strength. An analytical formulation for the tensile behavior of SFRC was developed using the variable engagement model, presenting a mean correlation of R2 of 0.97 with the experimental results.

There is an increasing awareness and advocacy claim for engaging the society in the production of public openspaces. This contribution seeks to increase knowledge on the relationship between spaces and the social practicesof teenagers, towards a more inclusive and interactive process of public space co-creation. It is based on twoEuropean Projects: CyberParks and C3Places, and explores teenagers' spatial practice and needs, and how toengage them in the process of co-creating more sensitive public spaces, while exploring the challenges andopportunities ICT open. It this paper, the results of a case study taking place in Lisbon and the analysis ofquestionnaires and interviews are discussed.

Counter to the notion that the production of azulejos in Portugal during the 16th century was scant, recent excavations are bringing to light shards that point to the opposite. The variety of fragments recovered from the ground will need many years of study to return a clear notion of what actually was produced at the time. In some instances, we come across particularly interesting cases, which are in a condition good enough to allow attribution based on previous research. A recent excavation at an area once part of the grounds of the ancient Convento do Carmo (Carmo Convent) recovered a large fragment that offers stylistically an immediate connection with less known productions of Antwerp. This paper includes the results of an analytical research of that fragment and discusses its provenance, significance and likely chronology.

The manufacture of majolica azulejos in Portugal started, as far as we know presently, during the 1550s by the workshop of Hans Goos, a Flemish potter established in Lisbon as João de Góis. The productions of what we may call the “circle of João de Góis” (maybe only a single workshop, or maybe several sharing the same technology) encompasses a period starting with his own productions before 1560 and lasting at least until the 1580s, possibly beyond. To address the characteristics of those productions and what makes them distinguishable, we have to compare them with those that chronologically preceded or followed it. This article attempts such a study, noting however that the notions of “antecedent” and “subsequent” do not imply a technological connection in the form that the latter is rooted in the former.

The azulejos in the Capela de São Roque (Saint Roch Chapel) in the church of the same saint, in Lisbon, are justly considered one of the major majolica works made anywhere during the last quarter of the 16th century. The earliest known surviving ensemble of Portuguese manufacture signed and dated, (“Francisco de Matos / 1584”) has long puzzled art historians mostly because their magnificence seems to have sprouted literally by spontaneous generation with no predecessors and few immediate successors. This communication reviews José Queirós’ references to the panels made over a century ago, when a hitherto unknown part of the lining was uncovered, and his information is compared with the objective proofs gained from instrumental results. The results also point to a definite technological ancestry that goes counter the notion that the work does not have antecedents.

This study of the early production of faience azulejos in Lisbon relies on three panels or groups of panels of known Portuguese origin: the incomplete and dispersed panels at Igreja da Graça signed by João de Góis and presumably datable to the 1560s; the panel of the demolished Capela de Nossa Senhora da Vida bearing a text that we believe identifies João de Góis as the workshop master and datable to ca. 1580, and the panels that line Capela de São Roque in Lisbon, dated “1584” and signed “Francisco de Matos”. In this article the information obtained from the microscopic observations and instrumental analyses of samples collected from tiles of the several panels is compared aiming to determine their common characteristics and most relevant differences.

One of the jewels in the collections of the Museu Nacional do Azulejo is a renaissance azulejo panel representing the Annunciation and the Adoration of the Shepherds, originally from the Capela de Nossa Senhora da Vida (Chapel of Our Lady of Life) of the now demolished Igreja de Santo André (Church of Saint Andrew) in Lisbon. Before the chapel was demolished, in 1845, the panel was removed and put in storage, while a second panel, considered of lesser value, was left in place and presumably destroyed. An archaeological excavation in 2018 on the site of the church unearthed a number of fragments from figurative azulejos, thought to be part of the lost panel. This paper includes the results of an analytical study of azulejos from both the Nossa Senhora da Vida panel and from the excavated shards, compares the results and discusses the possibility that the findings were indeed once part of the lost azulejo panel.

O artigo aborda a noção de ‘bairro’ como um importante recurso simbólico da construção do imaginário de Lisboa na atualidade, não só confirmando a continuidade transformativa de que a cidade é “uma cidade de bairros”, mas também influenciando a realidade quotidiana destes lugares-bairro. Para o efeito, realiza-se uma revisitação da noção de bairro na literatura. Seguidamente exemplifica-se, através de determinados casos, alguns recursos à noção de bairro e respetiva resignificação do conceito, procurando observar algumas das problemáticas contemporâneas da cidade e, como tal, dos seus bairros.

A reflexão discute e propõe uma abordagem do ato de caminhar como método integrado e interdisciplinar para captar a experiência territorial das pessoas e, no campo do urbanismo, perspetivar a cidade. Atenta aos amplos benefícios do uso caminhado da cidade, às virtualidades do incrementar espaços caminháveis, ao caminhar como ato de resistência e assimilação estético-sensorial da cidade, o objetivo aqui é, todavia, abordar o caminhar como recurso metodológico de apreensão compreensiva, cocriativa e mais responsiva da cidade. A acuidade do caminhar advém aqui, por um lado, de um percurso etnográfico de investigação que, por outro lado, tem colaborado para insinuar sobre o interesse de uma maior ingerência didático-pedagógico que, em defesa de que se caminhe mais antes de intervir na cidade, assuma efetivamente o caminhar como um potencial método cocriativo do captar e fazer o espaço urbano.

In the interior of Igreja de São Roque (Saint Roch Church) in Lisbon, on both sides of the nave near the entrance, a close inspection of the tile linings promptly reveals a potpourri of azulejos hastily intermixed with the otherwise orderly panels bought from Seville in the late 16th century. Presumably this is, at least partially, a consequence of the 1755 earthquake that brought down a part of the façade of the church, certainly affecting the azulejo panels in the surrounding area. Some of these azulejos are obviously connected with the Seville panels but others are very different. In this paper, we present the results of a first study concerning those odd dispersed azulejos on the walls of the lower nave of São Roque and discuss their origin, significance and chronology.

A significant number of problems related to concrete deterioration have been detected in large concrete structures in Portugal and worldwide, the leading cause being ASR. The importance of these structures, the number of for which ASR has already been identified or is very likely to be diagnosed in a near future, as well as the number of structures that are under or planned for construction, which may also come to develop ASR is why it is still nowadays a major concern and a complex problem. Therefore, a study is being conducted at LNEC to diminish the negative impact of ASR by increasing knowledge on how to reliably control ASR in new structures and on how to properly assess its extent and potential for future development in the existing ones, so that the risks to structural integrity and need for mitigation/remediation actions can be properly assessed. This paper presents methodologies, based on state-of-the-knowledge collected on that study, which may be used by construction industry stakeholders in the prevention of ASR in new concrete structures and on ASR diagnosis and prognosis in existing concrete structures.

In the second half of the nineteenth century the Roseira factory in Lisbon was one of the most important manufacturers of façade tiles used both in Portugal and in Brazil. “Casa das Bolas”, a condominium building in Lisbon informally named after the glazed tiles decorated with spherical elements in trompe l'oeil of its ground-floor façade, was owned by a member of the Roseira family who erected it using parts of an earlier construction in 1871-72. In its interior can be seen an authentic showcase of patterns produced by the factory and applied in apparently random order under the inside of the window sills and in some service areas. The singularities of this application, associated with the high number of patterns therein (over 50), make it an important reference for the study of façade tiles in the first decades of their use. It is an invaluable source of information about a factory that was possibly the first to produce façade tiles in Lisbon and despite having supplied many of the tiles seen at the Royal Pena Palace in Sintra and at other important constructions of the time, such as the Beau Séjour Palace in Lisbon, remains almost unknown.

Propõe-se apresentar o projeto CyberParks, cujo principal objetivo é criar uma plataforma de intercâmbios e conhecimentos sobre Tecnologias de Informação e Comunicação (TIC), a produção e práticas de uso de espaços públicos urbanos e a sua relevância para o desenvolvimento urbano sustentável. Exploramse as principais perspectivas teórico-metodológicas delineadas no âmbito da realização de estudos de caso em Lisboa. Com base nos avanços até aqui conseguidos, discute-se alguns dos desafios que se colocam no âmbito do gerir os riscos e as potencialidades no recurso as tecnologias da informação e comunicação (TIC), nomeadamente quando consideradas mediadoras ativas da relação entre a produção de conhecimento sobre o uso do espaço público urbano – investigação – e a definição de eixos orientadores de intervenção – planeamento.

This reflection is part of a wider interest in the study of the social processes of development of cultural heritage. Based on the knowledge of how these values are formed and represented, this more ambitious purpose is oriented towards the identification of how social and symbolic meanings related to cultural heritage can, in a dynamic, interactive and negotiated way, collaborate with protection and conservation practices. As a general framework, it is assumed that the process of heritage invention is a social practice, simultaneously mentioning that so are also are the preservation and conservation, which require social involvement and other types of commitment. In fact the tile heritage is no exception to this starting frame. Therefore, this reflection whose goals are more modest, illustrates some of the preambles leading to the interest in starting a research on the social meanings associated with the azulejo (ceramic tile) integrated in architecture. The focus of the reflection is the Portuguese context, where it is supposedly consistent to refer that the azulejo is a secular element of material culture: present with special relevance in the country's cultural landscape and presenting itself as an identity marker; with a permanent place in a national museum, the tile material comprises the contents that define the heritage category, protagonist in the internationalization of the country. The significant exaltation of the expression of tile matter is echoed in several different contexts, discourses and representations. Values of use, function, artistic, decorative and aesthetic, historical, technical and scientific, support the secular tile culture, potentially setting a cultural uniqueness that is plural in diversity through which styles, themes, textures, materials, techniques, colours and patterns are revealed to the eyes of careful observers. However, the secular taste for azulejo also seems to reveal an ambiguous relationship of people and communities with the tile as a material, recognized in the relationship of simultaneous affection and disaffection, reflecting the enhancement in the use of tiles and its trivialization, due to the habit of using and seeing them. What do the appreciable demonstration of enjoyment for the tile, and the manifestations of carelessness, disinterest, vandalization and substitution explain about the relationship between society and heritage? This first perplexity of the relationship of people and communities with the azulejo is the initiatic preamble of an anthropologist to learn about the social universe that covers the culture of the ceramic tile. Therefore, this reflection raises questions about the potential interest of broadening the scope of comprehending azulejo heritage also to its social meaning.

For five centuries, azulejos have been widely used in Portugal as decorative architectural linings. The most serious form of degradation is the spall of the glaze containing the decoration. Crystallisation of soluble salts is often pointed as its main cause, but that remains yet to be proven. Indeed, there are publications on many simulations of salt decay in porous materials such as stone or brick. However, azulejos have a largely impermeable surface which excludes the possibility of through evaporation, and thus represent a very different physical model. This communication reports a study on the physical degradation of azulejos caused by cycles of dissolution and re-crystallisation of sodium chloride (NaCl). Ageing tests were carried out on 26 Portuguese azulejos from the 17th to the 19th century, some of which with original manufacturing defects or with varying degrees of decay arising from their in situ usage. Ageing cells were developed to try to reproduce conditions to which azulejos are subjected to in walls, namely imbibition from the backside and drying through the glazed surface. The azulejos initially contaminated with a NaCl saturated solution were submitted to 81 accelerated full cycles of imbibition/drying. The tests caused damage in some cases- sometimes very extensive damage indeed- particularly settling in areas where the solution could evaporate freely, but failed to reproduce other sorts of damage often found in situ. It did not verify that the action of NaCl alone could trigger an accelerated loss of glaze in a healthy and properly applied azulejo. Moreover, we concluded that the decaying action of soluble salt is facilitated by pre-existing degradation or defects.

Currently, the restoration materials used to fill gaps in architectural historic azulejos (e.g. lime or organic resin pastes) present relevant drawbacks in terms of compatibility, efficacy or durability. The current solutions are not able to fully protect the azulejos resulting in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude, durability and versatile range of physical properties that may be obtained through the manipulation of their formulation and curing conditions. This communication presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers (type and concentration of activators, aluminosilicate source and water content) and curing conditions was optimized. The need for post-curing treatments (desalination) was also taken into consideration in view of the purpose of their application: the restoration of outdoor architectural historic azulejos, which are exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos is also discussed.

The important set of azulejos that can be seen today in the ante-sacristy of the Graça Church, in Lisbon, dated from between circa 1565 (year when the building of the new complex was finished) and 1580, is probably one of the most relevant indications of a local production of azulejos in the faience technique during the 2nd half of the 16th century. In the course of a research conducted to determine the origin of this technique in Portugal we tried to regroup these azulejos, some of them randomly set on the walls, using digital techniques. It is now possible to see some of the coherent images that once they represented. At the same time an important monogram was found in one of the panels, which helped to formulate an hypothesis on the possible author of these panels and brings to light the significant role that Flemish artisans had in the spreading of the faience technique in the manufacture of azulejos by the Lisbon workshops during the 2nd half of the 16th century.

Pattern or figurative azulejos are commonly found decorating the interior of churches, palaces and religious buildings in Portugal, representing local productions from the late 16th century onwards. The history and micro-climatic background of each building determined that not every azulejo reached the present day in good condition. Restorers tend to associate azulejo decay to the action of soluble salts through cycles of dissolution and crystallization. NaCl is often mentioned and the suspicion of its presence justifies long desalinization processes during restorations. Whenever there are glaze lacunas and the ceramic biscuit is exposed, efflorescence is sometimes apparent at the surface. Other times there is no visible efflorescence, even in locations inaccessible to cleaning actions, and no signs of sanding associated to crypto-florescence. The aim of this research was the survey of in situ forms of degradation, and the sampling of efflorescence and decaying biscuits, aimed at: i) determining the occurrence of soluble salts even if unapparent; ii) determining analytically their nature; iii) establishing circumstantial relations between the occurrence of particular soluble salts and decay, to be later explored through laboratorial simulations. 29 properties throughout Portugal were visited (of which 14 inland and 15 in coastal areas) in which walls were lined with azulejos produced in Coimbra or Lisbon. The salt samples and small fragments collected in situ were analysed with a HITACHI 3700N Scanning Electron Microscope with microanalysis unit (SEM-EDS) at the Hercules Laboratory (Évora University). The communication will illustrate the results of the study, connecting some forms of decay to the action of soluble salts recurrently found associated with them such as NaCl, more abundantly found in near-shore properties, along with sodium carbonate (trona). Magnesium and calcium sulphate were more common in inland properties.

In the last decades, a significant number of problems related to concrete deterioration have been detected in large concrete structures in Portugal and throughout the world; the leading cause being internal expansive reactions (IER), more specifically, alkali-silica reaction (ASR) and internal sulfatic reaction (ISR). Current knowledge on IER does not allow for a complete assessment of the actual condition of an IER affected structure and the accurate prediction of the deterioration of the mechanical properties and, consequently, of the period during which the structure will effectively perform its function, essential for the timely and cost-effective planning of the necessary mitigation/rehabilitation/reconstruction works. This is of upmost importance in large concrete structures, like bridges and dams, where IER can have severe consequences in terms of structural safety and serviceability. Therefore, to help surpassing this situation, a research project is being conducted at LNEC to contribute to the establishment of a method for the accurate determination of current level of IER progression and for obtaining data relating the level of expansion with deterioration of mechanical properties. These are essential to the adequate overall appraisal of an affected structure, and the development of structural models that predict risks to structural integrity, potential for further deterioration due to other mechanisms, need for mitigation/remediation actions, and the remaining service life of the affected structure. To study the effect that IER have in the deterioration of concrete, the common practice is to perform tests on specimens exposed to an artificial environment that promotes IER. However, these tests take several months or years to produce results. Thus, this paper presents the work carried out on the above research project to devise a method capable of producing internal damage to concrete in a short period and in a way that the produced deterioration affects the concrete mechanical properties similarly to IER.

Jorge Colaço is a Portuguese painter who started his artistic career as painter, oil painting on canvas and making cartoons for newspapers. In the early twentieth century, due to curiosity and interest in tiles, he devoted himself to tile painting. The vastness and the quality of his artwork (tile and frame panels) required mastery and accuracy in drawing and painting, but also a developed knowledge of the ceramic techniques, which the artist acquired in the factories where he worked: Sacavém Factory (Fábrica de Sacavém) and Lusitânia Factory (Fábrica Cerâmica Lusitânia). In the context of the inventory and identification of his artistic creation we highlight the conservation issues. Towards a deeper understanding of these problems it was necessary to corroborate by laboratorial analysis the information provided by written and oral sources about the techniques he once used. For the analytic part of this research we were limited by the samples made available that were nonetheless considered sufficient to draw conclusions: two samples of indoor polychrome panels from Casa do Alentejo in Lisbon, painted while he worked at the Sacavém Factory; and one sample retrieved from the outdoor panels that line the façade of the Santo Ildefonso Church, in Oporto, painted while at the Lusitânia Factory.

This e-book and correspondent platform MyC3Place present the collection of the outcomes carried out by the partners of the C3Places Project. It explores the new dynamics of open spaces as a trusted service for community and expands our understanding on how mediated public open spaces function, paying attention to stakeholders, local context and different social groups. The e-book shows how it's possible to increase the quality of public open spaces (squares, parks, green spaces) as a community’s service, reflecting through ICT the needs of different social groups. Public spaces are critical for cultural identity, as they offer the place for interactions among generations and ethnicities. Even in the digital era, people still need contact with nature and other people to develop different life skills, values and attitudes, to be healthy, satisfied and environmentally responsible. Using ICT and co-creating with users, this e-book expands our knowledge on meeting emerging citizens’ needs about the future public space. All the contents are classified by means of keywords that are described on the following pages. Then the work of each partner is presented in detail.

C3Places - using ICT for Co-Creation of inclusive public Places is a project funded under the scheme of the ERA-NET Cofund Smart Urban Futures / Call joint research programme (ENSUF), JPI Urban Europe, https://jpi-urbaneurope.eu/project/c3places. C3Places aims at increasing the quality of public open spaces (e.g. squares, parks, green spaces) as community service, reflecting the needs of different social groups through ICTs. The notion of C3Places is based on the understanding that public open spaces have many different forms and features, and collectively add crucial value to the experience and liveability of urban areas. Understanding public open spaces can be done from a variety of perspectives. For simplicity’s sake, and because it best captures what people care most about, C3Places considers the “public” dimension to be a crucial feature of an urban space. Public spaces are critical for cultural identity, as they offer places for interactions among generations and ethnicities. Even in the digital era, people still need contact with nature and other people to develop different life skills, values and attitudes, to be healthy, satisfied and environmentally responsible. The book aims to spark discussion on the co-creation of public open spaces through the active involvement of different stakeholders in the production of a more inclusive, attractive and responsive urban environment. It intends to help researchers, governments and drivers in understanding and implementing more collaborative actions. The authors share experiences, visions and reflections on how co-creation and participatory processes can open up possibilities for a sustainable and equitable future. This book emphasises three dimensions: practice, reflection, and learning. Practice concerns driving actions, identified and analysed experiences that serve as key models. Reflection refers to exploring and examining the results and performances of a co-creation process. Co-creation is not the search for a final product, but rather a process and a new path to more responsive and inclusive communities. Learning refers to the knowledge transfer and replication induced by the synergy of the different actors involved in this book. The chapters which constitute this work were completed prior to Spring 2020, so the research and insights do not reference the global public health crisis caused by Covid-19. However, in such challenging times the argument for co-creation approaches to increase the potential of public spaces to support a range of inclusiveness outcomes is even stronger. This publication is based upon work of C3Places Project. The C3Places Project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement No 693443 and from FCT (Portuguese Funding Agency for Science, Research and Technology).

This volume aims to promote discussion and critical thinking on the urban environment at the intersection of the neighbourhood and the city, along their socio-spatial relations, from an interdisciplinary, multidimensional and international perspective. The chapters cover various aspects related to the meaning of living, intervening, planning, managing, thinking about and producing the city in the digital era, with a view to increasing the understanding of neighbourhoods as part of a wider consideration of social and sustainable development and the need for greater care of urban communities. This has a direct impact on public open spaces, which lie at the core of CyberParks. The international scope of the edition is enhanced by its bilingual nature, as this volume targets, in addition to a European readership, also the readership of Portuguese-speaking countries. This publication is based upon work from COST Action TU1306, supported by COST (European Cooperation in Science and Technology).

Vários

Publicação que regista os resumos expandidos realizados no âmbito do Congresso Ibero-americano "Património, suas matérias e imatérias", realizado nos dias 2-3 de novembro de 2016 no LNEC, contendo ainda em CDrom, os artigos completos.

Em 2011 cumpriram-se 100 anos sobre a publicação da Lei de Reorganização dos Serviços Artísticos e Arqueológicos da 1ª República (Maio de 1911). Este diploma constituiu uma referência incontornável no enquadramento do conceito de património que iria influenciar toda a prática da sua salvaguarda em Portugal. Por coincidência, cumpriram-se também neste ano os 80 anos da Carta de Atenas (Outubro de 1931), um marco histórico na produção de documentos orientadores de cariz internacional, que veio incentivar a produção de novas cartas e outros documentos internacionais que, em larga medida, ainda definem e sustentam as actuais práticas de preservação do património. O Instituto de História da Arte da Universidade de Lisboa e o Laboratório Nacional de Engenharia Civil quiseram com este simpósio assinalar aquelas efemérides oferecendo às comunidades científicas e profissionais uma oportunidade de reflectirem sobre estes acontecimentos pioneiros e debaterem as consequências que eles tiveram no período transcorrido desde então, como forma de compreender melhor a salvaguarda do património nos dias de hoje, perante os desafios e exigências da sociedade moderna. Os artigos recebidos, e que constam nas presentes actas, demonstram o interesse que o tema suscita e confirmam que o País está bem apetrechado para cuidar do seu património em todas as vertentes que tal objectivo exige. Ao juntarmos as valências de duas instituições tão diferenciadas, procurámos mostrar que a preservação é um conceito multifacetado, que necessita de contributos diversos, mas precisos, e que não pode ser abordado de forma unilateral ou voluntarista por um qualquer grupo profissional ou ditado por meios burocráticos como medida normalizada ou normalizável. Os trabalhos agora publicados dão conta dos primórdios das preocupações sobre preservação, discutem problemáticas que percorreram o Séc. XX e reflectem sobre as situações actuais, cumprindo cabalmente as nossas expectativas e enriquecendo o acervo de exemplos e de doutrinas que nos permitem afirmar que não é por falta de conhecimento, de experiências ou de competências realizadoras que ainda hoje vemos acontecerem intervenções desqualificadas, mal preparadas e desajustadas. As presentes actas aí estão para demonstrar que fazer mal ou abandonar património não têm que ser fatalidades de um país.

N/A

In the construction sector, overall policies on resource efficiency and the circular economy have as one of their objectives the shift from the use of natural mate-rials to industrial by-products and materials recovered from waste. In this context, the assessment of the presence of hazardous substances in construction products and the corresponding implications for the environment

The Lisbon Living Lab will be centred on teenagers (young people 13 to 17 years of age) as they are a particular age group with specific needs and interests on public spaces, the relationship between teens and public spaces is very intrinsic, as public spaces may serve as a fundamental (play)ground for teenagers’ development. The Lisbon’s Alvalade neighbourhood will be living lab to explore how teenagers use and behaviour in urban fabric and what are they needs and preferences on public open spaces. The main objective is to engage teenagers in a process of the co-creation of urban spaces, by exploring the leading research question: “How can we capitalise on teenagers’ new-found love of the wired life (Thomas, 2013) to encourage them to be more outdoors?”

This chapter explores the potential of co-creation for the planning of public open spaces that could be more attentive to different, unequal and diverse social ideas, needs and desires. Co-creation is discussed as an innovative opportunity for learning and (re)thinking urban planning. Exploring ideas, literature and experiences (from the European Project C3Places), the chapter discusses the role of co-creation for involving citizens in placemaking. This reflection addresses co-creation as a collective, contextual and engaged process of learning. From this perspective, co-creation is discussed as an open process of learning about predictable ideas in the relationship between socio-spatial imaginary, requirements, needs and urban design procedures from a transformative perspective.

Public open space is a subject that belongs to us all. Every time we leave our homes, our private territory, we enter a space we have to share with others. Public space is the place for social interactions, strengthening sociability and ultimately exercising democracy. As a subject of study, public space has also long been analysed, explored and researched in various ways and under different guises, by planners, landscape architects and designers, anthropologists, social and cultural geographers, and urban historians. They all bring evidence on the role of public space in urban life, in the quality of urban environment and in the construction of cultural identity. Consequently, public space should deserve serious consideration by all - starting with those in charge and who hold regulatory responsibilities for those who use the places and ultimately give them life. As the UN-Habitat (2015) rightly recognises, a public space represents a key resource for social cohesion, economic development, and in particular liveability in urban settings. Public space is a resource that critically affects community values and positively impacts the quality of urban life. Backed by these premises, this book is about the co-creation of public open spaces, an issue at the core of the C3Places Project. To better understand the process, particularly the values of engaging people in the production of public space, is one of the C3Places’ objectives. The project is developing strategies and tools to help increase the quality and responsiveness of public spaces. In this process, the Project also aims to better understand how Information and Communication Technologies (ICTs) can influence co-creation and social cohesion. The chapters of this book bring science a little closer to the knowledge about the design, production and management of public spaces. 37 authors responded to the Project’s call to share experiences, visions and reflections on how co-creation and participatory processes can create possibilities for a sustainable and equitable future.

Face à metamorfose que se presencia na região da Avenida Almirante Reis, este capítulo discute a sua correlação com a criação de um novo discurso sobre a diversidade sociocultural. A partir do apelo a determinadas expressões — por exemplo, mundo e mundos — para enunciar a diversidade local, sugere-se a crescente transfiguração do discurso e a conexão com a economia cultural amplamente estimulada pela intervenção ali protagonizada. No desenvolvimento desta reflexão, privilegia-se o discurso produzido pela comunicação social.

The chapter considers the link between urban transformations in the Mouraria neighbourhood in Lisbon and the digital environment.The guiding thread of reflection is based on the tension between the production of sociocultural symbolic local references, and their (dis)appropriation by a creative economy that, relying on digital as a resource, helps to reshape the sociocultural local world into marketing. It concludes that digital has, not only a tangible social dimension, but also a tangible dimension in the processes of urban transformation. As such, it is pertinent to create alternative ways in defence of the right to the city that economize the social and its imageries taking more advantage of the articulated combination between real-digital.

This chapter is concerned with how digital technologies are changing habits, expectations and motivations in the use of public open spaces. These digital developments are a societal challenge with reflections on social practices and, on planning and design approaches to public spaces. This might also challenge the future development of information and communication technologies (ICTs). The discussion in this Chapter is based on knowledge and experience exchanges carried out within the COST Action CyberParks. The leading issue of CyberParks is how to use ICTs to transform our cities into more human environments, rather than just more high-tech places, and to understand that “smartness” should be people friendly. Through the structure of the project, the importance of comprehensive and trans-disciplinary development is introduced and justified. A theoretical approach and frameworks from ethnographic and technological perspectives that help us to better understand (potential) interactions are being developed, and both are at the centre of this discussion.

The aim of this chapter is to discuss the production of mediated public open spaces by investigating the impact of ICTs in a participation process, and from this discussion to develop arguments to base a theory on co-creating a cyberpark. It focuses on how digital interconnectivity, through its potential for engaging potential users, gives rise to new forms of agency in the design of public spaces.The conceptual framework is backed by the COST-Action Cyberparks, and the Project Flussbad, both tackle the reflection of the proliferation of ICT-related media in public open spaces.

This chapter discusses the act of walking as a method of capturing the socio-spatial needs of users in a contemporary urban space. Walking as method is considered a way to assimilate a socio-spatial proximity experience, and to (re)invent the response to urban space needs in a fast-changing city. This reflection discusses the purposes of urban planning, provides a framework, which goes from socio-spatial urban needs to (possible) responses, and discusses the complexity of evaluating the information gathered. It highlights the role of walking in planning, but also the relationship between plan and walk, discussing some of the key aspects to bear in mind when taking the act of walking as a way to learn how to plan. From the sensitive act of walking to the rational processes of collecting information, e.g., techniques for basic information collection for urban planning, this chapter also presents the role that ICT can play as an instrument of socio-spatial design in capturing relevant information for urban planning professionals.

The chapter discusses how ICT can be used to enhance the understanding of the relationship between space, users and social practices. As an example of possible use of ICT for capturing and better understanding user’s needs, the new digital tool WAY Cyberparks is presented and discussed. A “cyberpark” is defined as a new type of urban landscape where nature and ICTs blend together to generate hybrid experiences and enhance quality of life. The WAY Cyberparks digital tool consists of a smart phone application, server/cloud and web services. Through the experiences from testing it in selected urban open spaces in Barcelona, Lisbon and Ljubljana opportunities are presented and lessons are drawn about relevant aspects of the ICT towards building a more participatory and collaborative process in planning of public spaces. A relevant aspect of the ICT lays in their ability to enhance communication with (potential) users, transforming the production of public open spaces into an interactive process, and enabling creative community participation and empowerment. Furthermore, some challenges of the increasing penetration of digital technologies devices (smart phones, smart watches, tablets, etc.) within the broader context of their use in public urban open spaces such as parks, gardens, squares, plazas are discussed, together with the consequences of this interweaving, which is growing at a rapid pace, unfolds research needs in the future.

Atualmente existe grande interesse pelas técnicas construtivas com terra crua, que tinham caído em desuso mas que ressurgiram com a conscencialização face à ecoeficiencia e no sentido de explorar recursos locais reutilizáveis. A taipa é, a nível mundial, uma das mais antigas e difundidas técnicas de construção. Em Portugal a taipa reune grande atenção porque é uma das principais técnicas utilizadas na nova construção com terra. Mas esta atenção decorre também da necessidade de reabilitação de edifícios antigos e da existência de um vasto e valioso património arquitetónico, que precisa ser preservado. Muitos dos edifícios antigos de terra deterioraram-se por falta (ou ineficiência) de manutenção e reparação. De fato, existe um elevado desconhecimento ao nível das técnicas de reabilitação e conservação. O presente trabalho de investigação explora a questão da adequabilidade de argamassas para a reparação de paredes de taipa. A escassa informação nesta área justificou o estudo das caraterísticas mais adequadas para estas argamassas de reparação e definição de recomendações para sua aplicação. Partiu-se do pressuposto que, para perspetivar intervenções de reparação com maior ciclo de vida, é importante asseverar não só a durabilidade das argamassas de reparação, mas também a sua compatibilidade com a parede. A principal conclusão é que, sempre que possível, as argamassas devem ser efetuadas com a mesma terra utilizada na parede ou com materiais tão semelhantes a esses quanto possível, para que as propriedades físicas, mecânicas e químicas sejam compatíveis com as da parede a reparar. Se a taipa não tiver sido estabilizada com ligantes minerais, estes não devem também ser utilizados nas argamassas de reparação. Observou-se ainda que as argamassas estabilizadas com ligantes minerais apresentam uma absorção capilar muito mais rápida do que o mesmo tipo de argamassas sem estabilização e que a utilização de fibras vegetais potencia o aparecimento de bolores, quando as argamassas se encontram em ambientes com elevadas humidade relativa.

This thesis was aimed at understanding the behaviour of plasters and renders on salt-loaded walls. The current state-of-the-art and state-of-the-practice were accessed focusing particularly on old plastered/rendered buildings and their conservation practice in Portugal. Afterwards, experimental work was carried out aiming at answering the identified questions. Two laboratory techniques, for relative humidity control with salt solutions and for salt content determination by hygroscopic moisture content measurements, were investigated. Drying of salt-loaded materials was studied by means of drying experiments monitored using a magnetic resonance imaging (MRI) technique. The behaviour of plasters and renders in relation to salt crystallization was then accessed by means of crystallization tests and MRI-monitored drying tests. Most drying and crystallization tests were carried out on specimens composed by a plaster or render applied on a given substrate. Finally, the study of five old buildings in Portugal provided an insight into practice-related salt decay features. On the basis of this research, guidelines are proposed to select plasters and renders for salt loaded walls. Conclusions were also achieved on: (i) possibilities and limitations of the test methods, particularly salt crystallization tests, and diagnostic methodology used; (ii) salt decay processes, namely, influence of soluble salts on drying, mechanisms of salt-induced dampness and salt distribution in masonry; (iii) reasons for sodium chloride being typically much less damaging than sodium sulfate in laboratory tests; (iv) influence of factors such as the type of salt, kind of substrate material or presence of a paint layer on the behaviour of plasters and renders; (v) factors that can account for a worsening of salt damage after restoration interventions; (vi) field or application conditions that favour salt damage.

A ação dos sais solúveis e humidade nos edifícios antigos é uma causa frequente da sua degradação. Pretende-se com este trabalho estudar experimentalmente, através de ensaios laboratoriais, de que forma diferentes tipos de sais dissolvidos em água influenciam a absorção por capilaridade em materiais porosos. O levantamento do estado da arte incidiu sobre a ação de degradação dos sais solúveis sobre os materiais porosos, sobre as características dos materiais porosos e foca também os mecanismos de transporte da água, no estado liquido e de vapor, envolvidos nos processos de absorção capilar e secagem. A campanha experimental realizada incluiu o ensaio de absorção por capilaridade e o ensaio de secagem. Os materiais porosos utilizados foram o tijolo e a argamassa e utilizaram-se seis soluções salinas, de concentração saturada: cloreto de sódio, sulfato de sódio, cloreto de potássio, nitrato de sódio, nitrato de potássio e carbonato de sódio. Realizaram-se os mesmos ensaios com água, que serviram como referência. Esta dissertação permitiu tirar conclusões sobre: i) a influência dos sais na absorção por capilaridade; ii) processos de degradação, influência dos sais solúveis na secagem de materiais porosos; iii) a correlação existente entre a degradação dos materiais porosos com o tipo de sal.

Although Portuguese azulejos are such an important heritage asset, having been extensively studied from the Art Historian viewpoint, the knowledge concerning the raw materials used and the details of the technological manufacturing process is very limited. The research project behind this dissertation was aimed at improving the present knowledge as concerns the composition of the blue pigment used in the 17th and 18th centuries. A representative set of azulejos spanning at least 200 years from ca. 1600 to 1800 was selected and the composition of the blue colour in their glazes analysed. The results were assessed aiming to answer the following main questions: i- What are the characteristic compositions of the colour (pigment and impurities) and how do they relate with the chronology of the azulejos? ii- What are the compositional traits that bear on the shades of the blue colour? iii- Can Portuguese azulejos be separated from Dutch and Spanish productions, at times when they co-existed in Portugal, solely by the composition of the blue colour? iv- Is the composition of the blue colour related with provenance of azulejos within Portugal? v- Are there grounds to suspect that at some time the Portuguese used, besides the well-known German zaffre, alternative sources of blue colour imported through their wide sea trade routes?

The presence of moisture inside a material whose surface was treated with a water repellent agent may give rise to unwanted side-effects. Indeed, the temporal and spatial significance of moistening events may be intensified if a water-repellent, as any other kind of treatment, hinders drying. This effect can be particularly relevant for historical buildings, where moisture from varied origins is recurrently present in the masonry, but is also pertinent for more recent constructions since water often finds ways to penetrate the building elements, through cracks or joints. This article discusses the application of water repellent treatments on ceramic brick, with regard to drying of the masonry. The influence of cracks parallel or perpendicular to the surface is taken into account. Five silicone-based treatments were studied. The treated or untreated material was subjected to capillary absorption tests by which the effectiveness of the water repellent effect was estimated, as well as water vapour permeability tests and drying tests. The effectiveness of four out of the five treatments is high. Vapour permeability is not much affected in one case, when the cracks are parallel to the surface, and in none of the cases, when they are perpendicular. Nonetheless, drying is significantly delayed by any of the five products, both in the case where the cracks are parallel to the surface as when they are perpendicular.

A presente dissertação visa avaliar a eficácia de dois modificadores de cristalização com baixa toxicidade quando em aplicados em dois materiais porosos, contaminados com dois tipos de sal. Foram testados o ácido cítrico e o ácido fosfocítrico, aplicados por absorção capilar ou por pulverização, em provetes de argamassa de cal aérea ou pedra de Malta saturados com soluções salinas de cloreto de sódio ou sulfato de sódio a 10% (percentagem ponderal). Foi efectuada uma análise macroscópica do efeito dos dois modificadores, baseada em ensaios de secagem. A pesquisa do estado-da-arte incidiu sobre as características dos materiais porosos, transporte de água, sais solúveis e modificadores de cristalização. Na campanha experimental foram ainda realizados ensaios de caracterização da argamassa fresca, da argamassa endurecida e da pedra de Malta utilizadas. Determinaram-se também as características de porosidade, permeabilidade ao vapor de água, tensão superficial e evaporação das soluções, capilaridade e secagem. O trabalho realizado permitiu conhecer os principais desenvolvimentos recentes sobre modificadores de cristalização e concluir sobre a influência na secagem e a relevância dos dois modos de aplicação testados do ácido cítrico e do ácido fosfocítrico.

A acção dos sais solúveis é uma causa frequente de degradação dos edifícios antigos, reflectindo-se a vários níveis (e.g., estético, habitabilidade, segurança estrutural). Esta dissertação tem como objectivo efectuar a análise e sistematização de um leque abrangente de práticas actualmente utilizadas para controlo da degradação por sais solúveis. Neste âmbito, foi utilizada a análise documental de bibliografia posterior a 2000 e procedeu-se à análise crítica de métodos de controlo da degradação seleccionados: remoção mecânica de eflorescências; remoção de materiais contaminantes; compressas; remoção electroquímica de sais; microrganismos; modificadores de cristalização; rebocos; controlo ambiental; controlo da humidade ascensional; método do hidróxido de bário. Analisaram-se também algumas medidas práticas para prevenção do risco de ocorrência ou agravamento desta degradação. Adicionalmente, avaliou-se a complementaridade entre métodos, identificando eventuais benefícios de uma acção conjugada. A sistematização das práticas analisadas envolveu o seu enquadramento segundo três abordagens distintas: prevenção, correcção, e mitigação. A dissertação permitiu tirar conclusões sobre: (i) a actuação face à degradação provocada por sais solúveis, a qual deve pautar-se por uma compreensão global do problema; (ii) a importância das medidas preventivas, como meio para evitar os danos e custos associados; (iii) a relevância dos métodos de controlo da degradação, nas vertentes correctiva e de mitigação; (iv) a experiência actual sobre a utilização prática dos métodos em edifícios, designadamente com relação ao número de casos de estudo existentes; (v) a necessidade de uma boa compreensão das práticas referidas, nomeadamente em relação às vantagens e inconvenientes, a qual pode ser facilitada pela sua sistematização.

Estudou-se um conjunto de fragmentos de azulejos datados do século XVII, de produção portuguesa, cedido pelo Museu Nacional do Azulejo. O objectivo foi caracterizar morfológica e quimicamente a camada pictórica da azulejaria portuguesa do século XVII. O estudo utilizou uma abordagem multi-analítica, incluindo a espectrometria de fluorescência de raios X dispersiva de energias (µ-EDXRF), espectroscopia de Raman, o microscópio electrónico de varrimento com microanálise de raios X (SEM-EDS), e técnicas de observação incluindo o SEM e microscopia óptica. A azulejaria portuguesa do século XVII caracteriza-se por uma paleta cromática relativamente rica, que engloba o azul, amarelo, laranja, verde, púrpura, um tom púrpura acastanhado e ainda outro castanho muito escuro utilizado em contornos. As cores integram um fundo branco – o vidrado estanífero característico da majólica. Confirmou-se que o azul se deve ao óxido de cobalto, o púrpura ao óxido de manganês e um dos verdes, de aparência transparente, ao óxido de cobre. Os resultados indicam que o amarelo será uma variante do pigmento amarelo de Nápoles (antimoniato de chumbo), constituído por um óxido triplo de Pb-Sb-Zn. As outras cores são obtidas através de misturas: o laranja resulta da adição de hematite ao pigmento amarelo, o verde-seco resulta da adição de óxido de cobalto também ao pigmento amarelo, e os vários tons entre púrpura e castanho resultam da mistura de hematite com óxido de manganês em teores variáveis. Observaram-se morfologias distintas das cores: o amarelo, laranja e castanho-escuro permanecem à superfície do vidrado e conferem-lhe cores opacas. O azul, o verde-cobre e o púrpura difundem no vidrado em profundidade e, por vezes, horizontalmente. Os seus óxidos dissolvem-se na matriz vítrea, obtendo-se uma cor transparente. Com o verde-seco ocorre uma separação dos componentes da cor, na medida em que as partículas de pigmento amarelo permanecem à superfície, enquanto o azul difunde no vidrado.

A presente dissertação tem por finalidade compreender a influência dos tratamentos hidrófugos na secagem do tijolo cerâmico, tendo assentado na realização de ensaios de absorção capilar, permeabilidade ao vapor de água e secagem. Foi inicialmente avaliada a possibilidade de utilização de tijolo cerâmico maciço de três proveniências distintas. Uma destas origens foi a Praça de Touros do Campo Pequeno, em Lisboa, que permitiu estudar quatro tipos distintos de tijolo antigo. As outras duas origens foram as cerâmicas Torreense e de Vale de Gândara, tratando-se portanto neste caso de tijolos de fabrico recente. Os diferentes tipos de tijolo foram caracterizados quanto à sua aparência, morfologia, teor de sal, absorção capilar e comportamento em secagem. O tijolo de Vale de Gândara foi o tipo seleccionado para a aplicação dos tratamentos hidrófugos. Foi detectada a presença de fissuras neste tipo tijolo, tal como em todos os outros tipos caracterizados. Sendo este defeito relevante para o transporte de humidade, foi necessário ter em consideração a influência da orientação preferencial das fissuras. Assim, utilizaram-se em todos os ensaios provetes com fissuras paralelas e provetes com fissuras perpendiculares à superfície. Estudaram-se cinco tratamentos hidrófugos com base em silicone. Foram realizados ensaios de absorção capilar através da face tratada, ensaios de permeabilidade ao vapor de água e ensaios de secagem (método RILEM da curva de evaporação). Realizaram-se ensaios semelhantes sobre o material não-tratado, que serviram como referência. Os resultados do ensaio de absorção capilar indicam que a eficácia de quatro dos tratamentos é elevada, sendo a secagem do tijolo significativamente dificultada por esses quatro produtos. Verificou-se, no entanto, que o decréscimo da permeabilidade ao vapor apenas é significativo para três hidrófugos. A influência dos hidrófugos na permeabilidade ao vapor apenas é mensurável no caso dos provetes com fissuras paralelas à base. Quando as fissuras são perpendiculares à base, a permeabilidade ao vapor é bastante mais elevada, não sendo afectada pelo hidrófugo.

A presente dissertação visa compreender a influência dos revestimentos por pintura na secagem de materiais de construção porosos, tendo focado a nível experimental o caso dos substratos constituídos por uma argamassa de cal aérea. Aborda-se, em particular, o caso dos edifícios antigos e, mais especificamente, a situação das paredes com teor de humidade não desprezável que é muito corrente neste tipo de edifícios. O levantamento do estado-da-arte incide sobre as características dos materiais porosos, em particular as argamassas de cal aérea, e de diferentes tipos de revestimentos por pintura indicados para este tipo de utilização. Foca também os mecanismos de transporte de humidade envolvidos nos processos de secagem. Efectuou-se uma pesquisa de mercado e um inquérito ao meio técnico com o objectivo de perceber quais os revestimentos por pintura usados em intervenções de reabilitação / conservação e, assim, avaliar a situação da prática em Portugal. A campanha experimental a seguir realizada incluiu ensaios de permeabilidade ao vapor de água, de absorção capilar e de secagem e incidiu sobre dezasseis revestimentos por pintura disponíveis no mercado português. Treze destes revestimentos são tintas de silicatos, de silicone ou de pliolite que os respectivos fornecedores indicaram serem apropriadas para aplicação em paredes com problemas de humidade. Ensaiaram-se ainda duas tintas de cal de fabrico industrial e uma “tinta plástica” que serviu como referência. A dissertação permitiu obter dados sobre o estado-da-prática em Portugal, em particular no que se refere aos tipos de tintas usados em paredes de edifícios antigos com teor de humidade não desprezável. Permitiu também retirar conclusões sobre: (i) a influência dos revestimentos por pintura na secagem, na absorção de água por capilaridade e na permeabilidade ao vapor de água; (ii) a influência que o estado de humidificação do suporte pode ter no comportamento dos revestimentos; (iii) a correlação existente entre o comportamento à secagem (índice de secagem) e a permeabilidade ao vapor de água, que é a característica correntemente utilizada para prever o desempenho dos revestimentos.

A realização de auditorias pré-demolição a edifícios requer o envolvimento de várias partes interessadas, desde o proprietário, ao projetista e ao empreiteiro, com vista a maximizar a recuperação de materiais e elementos construtivos e minimizar a quantidade de resíduos de construção e demolição, de modo a impulsionar a economia circular no setor da construção. Estas auditorias devem ser realizadas antes do projeto de demolição ou reabilitação do edifício, de acordo com recomendações comuns. Para a realização dessas auditorias, foi desenvolvido este Guia Português para Auditorias Pré-Demolição e uma ferramenta em Excel com modelos padrão para a realização de um inventário aos recursos presentes no edifício. O inventário teve como base as orientações da União Europeia e do Quadro comum da União Europeia de Edifícios Sustentáveis

Os resíduos de construção e demolição (RCD) representam 46% do total de resíduos produzidos na Europa, cerca de 820 milhões de toneladas por ano, ou 5190 kg per capita. Vários constituintes dos RCD são potencialmente reutilizáveis e recicláveis, o que foca a atenção no seu papel relevante na promoção dos princípios da economia circular no setor da construção, na fase de fim de vida. Este enquadramento conceptual visa reunir as melhores práticas dos diferentes países relativamente à aplicação de auditorias de pré-demolição em edifícios como uma ferramenta útil para o desenvolvimento do guia português. É também abordada a necessidade de minimizar a geração de resíduos contaminados, durante a demolição ou reabilitação de edifícios, como um caminho relevante para maximizar a reutilização e reciclabilidade dos RCD e a qualidade dos materiais recuperados. Para este efeito, é apresentada uma lista de substâncias perigosas críticas e feita a identificação dos materiais de construção que potencialmente contêm constituintes perigosos. Neste relatório é descrita a atividade desenvolvida na tarefa T2

Foi fabricado um betão com agregados de minério de ferro proveniente de jazida de Moncorvo, para avaliação do potencial destes agregados para o fabrico de betão de elevada densidade. Com base nos resultados obtidos são feitas considerações sobre a densidade do betão que será possível obter em função da massa volúmica do agregado.

The research project DRYMASS – Drying of porous building materials possibly contaminated with soluble salts (PTDC/ECM/100553/2008) took place from February 2010 to January 2014. The project allowed advancing the knowledge on drying of porous building materials, as well as about how soluble salts and some types of surface layers affect that behaviour. A new method to characterize salt decay processes by optical profilometry was proposed, and the usefulness of NMR to clarify the causes of such processes demonstrated. There was also a provisional patent application, which was based on research results about the influence that lime coatings have on drying. The main findings of the project were specifically the following. Lime coatings may accelerate the drying of porous substrates. Also due to their high drying rate, ordinary building materials have a high evaporative cooling potential. With salt solutions, the drying kinetics of porous building materials is slower than with pure water. One of the causes is the reduction in sorptivity. Occasionally, there is also obstruction to vapour transport by the efflorescence. However, in most cases, porous efflorescence occurs, which pose no obstruction to this transport. Further, fissures or disaggregation may accelerate drying. Soluble salts amplify the effects that the natural heterogeneity of porous materials has on the drying kinetics. Due to the chaotic nature of the process, lime coatings will not necessarily enhance drying in this case. Sodium sulfate can be very destructive in the absence of high temperature or successive wet/dry cycles. A delamination pattern similar to those found in real constructions was observed on the well-known Ançã limestone. NMR showed that mirabilite and heptahydrate can both be responsible for this delamination pattern, in different conditions. Thermal expansion may be one of the mechanisms involved in salt decay processes.

In this report we describe an experimental study carried out at LNEC within the research project DRYMASS (ref. PTDC/ECM/100553/2008). The study was aimed at evaluating the possibility of increasing the drying rate of porous building materials by means of nano-treatments. It was justified by previous results of other authors that observed an apparently unexplainable increase in the evaporation rate of natural stone after application of nano-calcium hydroxide solutions as consolidating agents. Two commercial treatments, consisting on alcoholic or aqueous suspensions of nano-lime or nanosilica, respectively, were tested on three porous building materials. The treatments are generally used for consolidation. The materials were a lime mortar and two natural stones (Ançã limestone and Bentheimer sandstone). It was concluded that neither of the nano-treatments hinders drying. However, they were also not able to increase the drying kinetics of any of the three substrates.

The decay of porous building materials due to salt crystallization is very frequent and often significant in the built heritage and, thus, a proper understanding of the underlying processes has major importance for conservation. In this light, a new method for characterization of salt decay processes was developed within the DRYMASS research project, which is based on continuously measuring by optical profilometry the micrometric changes that occur on the material surface during drying. This method produces three different types of output: the so-called "alteration curve", as well as the current gravimetric evaporation curve and time-lapse photographs of the decay. But the three features had, until now, to be recorded using different specimens. This is an important limitation because the high uncertainty of salt decay processes may give rise to different decay patterns in similar specimens. Here, we present a development of the original study, which was afterwards carried out within the same project to allow evaluating the three features in a single specimen, by using an integrated set-up. This new study was carried out with two salts often found in salt decayed constructions, Na2SO4 and NaCl, and a material frequently used in the architectural heritage, Ançã limestone. Some of the experiments were performed after application of a water repellent treatment on the stone.

This is the third progress report of the research project "DRYMASS - Drying of porous materials possibly contaminated with soluble salts". It includes the following main sections: (i) A summary of the work, which briefly describes the activities undertaken in the reporting period and the results achieved, referring specifically to the tasks under execution in that period. (ii) A justification of the deviations from the Approved Proposal, both from a scientific or financial viewpoint. It also identifies the major difficulties in implementing the approved work plan, and how they will be overcome. (iii) A list of publications. It includes also the following annexes: Annex I – 2nd reformulation proposal with updated timeline; Annex II – Cryspom III - Book of abstracts and conference program; Annex III – Summary report on Cryspom III; Annexe IV – Figures and abstracts; Annexe V – Article submitted to Transport in Porous Media.

Conserving the built heritage today entails decisions and planning at several different levels. Firstly, analysis is necessary regarding what to conserve: values, authenticity and integrity are the key concepts at this macro level. Then, decisions on how to conserve them should consider the chief principles of good conservation practice, among which compatibility, retreatability and minimum intervention are prominent today. This report analyses these concepts and the different ways in which they were translated into the decision support systems that are nowadays resorted to, from values-based decision making and risk management in conservation to intervention planning and performance assessments. The ultimate goal of this analysis is to compile tools that promote a more rational decision making in conservation.

Este relatório sintetiza a atividade desenvolvida no LNEC visando contribuir para a aplicação dos materiais obtidos no processamento de resíduos de construção e demolição (RCD) no sector da construção, nomeadamente em betões e argamassas, em pavimentos rodoviários e em aterros e camadas de leito de infraestruturas de transporte. Esta atividade abrange as áreas de investigação programada, de investigação por contrato e outras atividades científicas e técnicas das quais se destaca a preparação de especificações técnicas específicas para estes materiais, a difusão de conhecimentos através da realização de ações de formação, da elaboração de documentos e da participação em conferências e outras reuniões científicas e técnicas. Nesta atividade integra-se também a cooperação com entidades, nacionais e estrangeiras, designadamente com universidades e associações de carácter científico e técnico. Sendo esta uma atividade transversal no LNEC O presente relatório integra o trabalho desenvolvido no Departamento de Materiais, no Departamento de Edifícios, no Departamento de Geotecnia e no Departamento de Transportes.

A empresa Repsol Polímeros, Lda, através de correio electrónico no dia 6 de Abril de 2011, solicitou ao Laboratório Nacional de Engenharia Civil (LNEC) a avaliação do estado de degradação de estruturas do Terminal Portuário do Porto de Sines, que incluíam dois viadutos localizados entre os postos de acostagem 4/5 e 9/10 da Área do Porto de Sines (APS)1 e o porto-cais do terminal de Graneis Líquidos2, e a apresentação de recomendações relativas à solução a adoptar para a recuperação das estruturas.

O Laboratório Nacional de Engenharia Civil tem vindo a desenvolver um estudo no domínio da conservação dos azulejos históricos que permitiu, nalguns casos relevantes, estabelecer uma ligação entre determinados defeitos de fabrico e formas específicas de degradação. Esse estudo demonstrou a conveniência no estabelecimento de um glossário ilustrado, incluindo defeitos de fabrico e formas de degradação e contemplando alguma terminologia nova. É esse trabalho, saído de uma colaboração com o Museu Nacional do Azulejo, que agora se apresenta num vocabulário que inclui também algumas definições básicas, cobrindo termos necessários às definições subsequentes de defeitos de fabrico e de formas de degradação. Os termos em relação aos quais pareceu aos autores poderem subsistir dúvidas têm anexas ilustrações exemplificativas.

N/A

N/A

N/A

N/A

This paper delivers actionable recommendations towards building a rationale for activating and promoting Underground Built Heritage (UBH) based on the nexus heritage, territory and society, and making use of existing literature and findings from five international cases. The research was conducted in the framework of the working group on Planning Approaches of the COST Action Underground4value. The analysis of the cases aims to provide guidelines for this working group and to benchmark good practices in activating UBH. It highlights the importance of community-led initiatives, leadership and dialogue and power sharing between the local/regional authorities and communities aiming for better understanding of the potential of UBH. The successes and/or failures of the five cases emphasise the importance of knowledge and experience in participatory approaches. Success was verified, when effectiveness and democratic principles were combined in the planning process, and local history is integrated with citizen science, co-creation and placemaking. The analysed approaches stimulate a new hybrid layer for activating UBH, provide mechanisms of mediation between people and heritage, and contribute to cultural and social dimensions of sustainability. This is a highly challenging endeavour, as it seeks to support and advance a sound understanding of UBH as a sustainable resource, backed by strategic stakeholder dialogue and contextual knowledge. Such effort requires a dynamic understanding of UBH values, knowledge, abilities and skills, towards creating more effective coalitions of “actors” within localities, by developing structures, which encourage long term collaborative relationships.

N/A

A caracterização dos materiais históricos e a identificação do respetivo estado de conservação engloba um corpus de conhecimento teórico, prático e metodológico essencial para a conservação e o restauro do património cultural arquitetónico e arqueológico. Refletir sobre os materiais históricos para intervir no património requer, pois, contemplar a variedade de materiais a partir das suas múltiplas facetas, reivindicando uma perspetiva pluri e interdisciplinar na elaboração do conhecimento científico. Requer também aprofundar o estudo das tecnologias e materiais tradicionais, o que contribui para densificar o campo de conhecimento sobre o património e, cientificamente, definir os requisitos de compatibilidade e eficiência dos novos materiais, paralelamente colaborando para a salvaguarda do saber técnico tradicional.

O artigo trata de uma síntese de resultados do Congresso Ibero-Americano “Património, suas matérias e imatérias”, LNEC, Lisboa, 2-3 de novembro de 2016, constituindo-se um artigo de noticías.

O tabalho faz uma apresentação crítica do Livro " A supremacia do Pedestre", da autoria de Fábio Fonseca e Antonio Colchete Filho, tendo o Livro sido editado pela UNALFA: Editora da Unviersidade FEderal de Juiz de Fora, Minas Gerais, Braisl.

É analisada uma amostra de betonilha para determinação do teor de cimento. As análises incluíram a realização de ensaios de resistência à compressão, termogravimetria e químicos.