Papers
Info
Wave overtopping and flood risk assessment in harbours: a case study of the port of Las Nieves, Gran Canaria
This paper presents the analysis of the probability of occurrence of wave overtopping events as well as its consequences at the Port of Las Nieves in Agaete, Gran Canaria Island, with the evaluation of the resulting level of flood risk. The study has been conducted using a third-generation spectral wave model to reproduce wave propagation from deep to shallow water depths considering the associated mean sea level, and a neural network-based model, for estimating mean wave overtopping discharges. Results reveal that overtopping in the initial sections of the port, located in the port access area, is substantially higher than that associated with the cross-sections of the main body of the breakwater, so that control actions to reduce overtopping are required due to the important socioeconomic implications regarding the infrastructure inoperability.
Year: 2017
Number Pages:
1-10pp.
Author(s): Santana-Ceballos, J.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Rodríguez, G.
: WIT Transactions on the Built Environment
Editor: WIT Press
Volume:
Vol. 170.
Keywords: Port of Las Nieves; Neural networks; Flood risk; Wave overtopping
Info
Avaliação comparativa de ferramentas neuronais. Aplicação à Praia da Vitória, Terceira, Açores
Neste trabalho, descreve-se a aplicação ao porto e baía da Praia da Vitória, na ilha Terceira, Açores, Portugal, da metodologia de avaliação do risco de galgamentos em estruturas marítimas em desenvolvimento no LNEC, considerando duas ferramentas neuronais para cálculo dos galgamentos baseadas em resultados da aplicação de redes neuronais artificiais, nomeadamente a ferramenta NN_Overtopping2 e a Overtopping Predictor v1.1. Em particular, avalia-se comparativamente quais as implicações que a utilização de cada uma destas ferramentas tem em termos de número de eventos de galgamento e magnitude dos caudais médios galgados, bem como consequente grau de risco, para as 9 secções-tipo de estruturas marítimas estudadas no porto e baía da Praia da Vitória. O período de estudo é de 5 anos (2008 a 2012).
Year: 2016
Number Pages:
49-68pp.
Author(s): Reis, R.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.; Santos, J. A.
: Vetor
Editor: FURG
Volume:
Volume 26, n. 1.
Keywords: Galgamentos; Risco; Praia da Vitória; Porto; Overtopping predictor V1.1; NN_Overtopping2; Ferramentas neuronais
Info
Galgamento de uma estrutura portuária protegida por um quebra-mar submerso: o caso do Porto de Leixões, Portugal
O galgamento de estruturas portuárias consiste na passagem de água sobre o coroamento da estrutura pela ação da agitação marítima e é um dos fenómenos com maior impacto na integridade da estrutura e na segurança da zona por ela protegida. O principal objetivo deste trabalho é estudar o galgamento num quebra-mar de taludes, com um importante muro cortina, protegido por um quebra-mar submerso. Em particular, pretende-se otimizar a geometria do quebra-mar submerso situado a barlamar do quebra-mar de taludes, no qual se pretende diminuir o galgamento.A estrutura marítima em estudo é o molhe norte do Porto de Leixões, em frente ao qual já existe um quebra-mar submerso na zona da cabeça. Pretende-se estender a zona do molhe protegida pelo quebra-mar submerso e, para tal, é necessário estudar qual a melhor geometria e posição a adotar para este quebra-mar.Para estudar a influência da geometria e da posição do quebra-mar submerso no galgamento do molhe norte, utilizou-se o modelo numérico IH2VOF. Simularam-se três condições de agitação regular, que diferem somente na altura de onda, e sete geometrias do quebra-mar submerso, que diferem da configuração original (a existente atualmente) em três características: a distância entre o quebra-mar submerso e o molhe, a cota de coroamento do quebra-mar submerso e a sua largura de coroamento.Com a realização deste estudo, para as condições de agitação consideradas, verificou-se que as características com maior impacto na redução do galgamento no molhe norte do Porto de Leixões são: o aumento da distância entre o quebra-mar submerso e o molhe e o aumento da cota de coroamento do quebra-mar submerso. O caudal médio de galgamento para as condições de agitação em estudo reduziu-se de um valor máximo de 0,71 l/s/m para a configuração original para 0,02 l/s/m em duas das novas configurações analisadas, ou seja, uma redução de 97% face à configuração original.
Year: 2016
Number Pages:
121-131pp.
Author(s): Bairrão, M.; Neves, M. G.; Reis, M. T.; Taveira-Pinto, F.
: Revista de Gestão Costeira Integrada / Journal of Integrated Coastal Zone Management
Editor: APRH
Volume:
16 (2).
Keywords: Modelação física; IH2VOF; Modelação numérica
Info
Improving the aerodynamic performance of Vila-Real Bridge deck-section
The susceptibility of bridge decks to vortex induced oscillations can b eaddressed through wind-tunnel testing. This paper considers the case of the Vila-Real Bridge, in the north of Portugal, which has the highest deck above ground (230m), among concrete-deck bridges cable-stayed in the central plane. It has a single-cell rectangular box girder with a wide top flange supported by regularly spaced inclined struts. Aeroelastic studies of this precise type of deck seem nonexistent in the literature.Results of sectional model tests are presented for a selection of three distinct angles of attack and three deck configurations, including a solution, alternative to the usual mitigation measures, that solved the susceptibility to vortex induced vibration of the deck and that has no relevant additional design or building costs.With the proposed approach, bridge designers may be able to relegate the use of sections with high aerodynamic performance
Year: 2016
Number Pages:
72-83pp.
Author(s): Vaz, D.; Almeida , R.A.S.B; Didier, E.; Urgueira, A.P.V.; Borges, A.R.J.
: Journal of Wind Engineering and Industrial Aerodynamics
Editor: Elsevier
Volume:
Volume 156.
Keywords: Box girder; Wind tunnel testing; Sectional model; Oscillations mitigation; Bridge aeroelasticity
Info
Mechanics of the scouring and sinking of submerged structures in a mobile bed: A physical model study
Wave-induced flow velocity and turbulence may cause scouring in the seabed around coastal structures depending on the wave climate and tidal water depth. A 3-D physical modelling study was conducted to investigate the possible causes of the sinking of two submerged coastal structures on the Santa Maria del Mar (SMM) beach, Spain. The experimental investigation was conducted by employing a Froude similarity law with a geometric scale of 1:20, and the submerged modular structure was subjected to different wave climates and tidal water levels. The combinations of the significant wave height and peak period were chosen from in-situ real wave conditions thatwere monitored during the sinking of the prototype structures. Linking and unlinking conditions for the modules in the structure were investigated in this study. The results show that the modules sank to approximately 48% of their height at the end of the tests with storm waves and semi-linking conditions of low water depth. Most of the experimental results were compatible with the prototype monitoring results. Tests with proper linking among themodules and testswith an appropriate gravel foundation resulted in a sustainable solution because they presented much less or almost no scouring and sinking.
Year: 2016
Number Pages:
50
Author(s): Khan-Mozahedy, A.B.M.; Muñoz-Perez, J.; Neves, M. G.; Sancho, F. E.; Cavique, R.
: Coastal Engineering
Editor: Elsevier
Volume:
110.
Keywords: Gravel bed; Sandy bed; Pumice stone; Submerged modular structure; Sinking; Scour
Info
Numerical simulation of flow interaction between stationary and downstream elastically mounted cylinders in tandem at low Reynolds numbers
Despite the simplicity of the geometry of the circular cylinders, the uniform flow around them is complex,since it may induce unsteady forces on structures associated with vortex shedding. This paper describes the study of two circular cylinders (the downstream one is elastically mounted in transversal direction) in tandem arrangement subject to bi-dimensional uniform laminar flows at low Reynolds numbers. The academic numerical model Ifeinco, which is based on the finite element method and uses a partitioned scheme that considers two-way interaction of fluid flow and structure, has been employed to the analysis.Firstly, both stationary cylinders in tandem arrangement for Re = 100 are analysed for center to center distance between the cylinders, L/D, from 1.5 to 6.0. Results of lift and drag coefficients and Strouhal number are compared with other numerical results and good agreement is found. Secondly, numerical results for L/D = 5.25, considering downstream elastically mounted cylinder, are analysed for Reynolds numbers ranging from 100 to 140. It shows that the resonance occurs for Reynolds numbers between 115 and 120 and the maximum dimensionless amplitude of oscillation is 0.721 for Re = 118.
Year: 2016
Number Pages:
11p.
Author(s): Teixeira, P.; Didier, E.
: Journal of the Brazilian Society of Mechanical Sciences and Engineering
Editor: Springer
Keywords: Wake interference; Tandem arrangement; Circular cylinders; Flow-induced vibration; Finite element method
Info
Numerical simulation of wave interacting with a submerged cylinder using a 2D RANS model
A 2D RANS numerical model (IH2VOF) is employed to study wave interacting with a circular cylinder with a diameter of 0.02 m in a water depth of 0.27 m, with a wave period of 1.08 s and a wave height of 0.047 m. The influence of the wall proximity on the forces is analyzed for ratiosbetween the pipe (i.e. circular cylinder) distance from the bottom and the pipe diameter varying from 0.04 to 1.5. Results of lift forces and streamlines are compared with the experimental results of Jarno-Druaux et al. (1995) and good agreement is found. Lift, drag and inertia coefficients are also compared with experimental results and the same trend of fundamental quantities with the gap between the cylinder and the bottom was obtained with the model giving slightly larger values. Finally, the influence of the method to estimate the drag and inertia coefficients in the force calculated using Morison equation is analyzed and Morison method shows the better agreement.
Year: 2016
Number Pages:
1
Author(s): Inverno, J.; Neves, M. G.; Didier, E.; Lara, J. L.
: Journal of Hydro-environment Research
Editor: Elsevier
Volume:
12.
Keywords: Hydrodynamic forces; Submerge circular cylinder; Drag and inertia coefficients; RANS modeling
Info
Performance of a fuzzy ARTMAP artificial neural network in characterizing the wave regime at the Port of Sines (Portugal)
Techniques based on artificial neural networks (ANNs) have been increasingly applied to predict emergency situations, such as extreme wave conditions, wave overtopping or flooding, and damage to maritime structures, in coastal and port areas. In this work, a fuzzy adaptive resonance theory with mapping (FAM) ANN was trained to predict the wave regime both inside and at the entrance to the Port of Sines, one of the major trade and economic gateways of the Iberian Peninsula, located on the Portuguese west coast. In situ measurements using pressure sensors, wave buoy data, and results from two numerical wave propagation models
Year: 2016
Number Pages:
1362
Author(s): Santos, F.; Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Lotufo, A.; Neves, D. R.; Poseiro, P.; Maciel, G.
: Journal of Coastal Research
Editor: Coastal Education and Research Foundation
Volume:
Volume 32, Issue 6.
Keywords: Artificial neural network (ANN) training and validation; In situ measurements; Wave buoy data; Numerical wave propagation modeling
Info
Photogrammetric analysis of rubble mound breakwaters scale model tests
The main goal of this paper is to develop a photogrammetric method in order to obtain arobust tool for damage assessment and quantification of rubble-mound armour layers during physicalscale model tests. With the present work, an innovative approach based on a reduced number ofdigital photos is proposed to support the identification of affected areas. This work considers twosimple digital photographs recording the instants before and after the completion of the physicaltest. Mathematical techniques were considered in the development of the procedures, enabling thetracking of image differences between photos. The procedures were developed using an open-sourceapplication, Scilab, nevertheless they are not platform dependent. The procedures developed enablethe location and identity of eroded areas in the breakwater armour layer, as well as the possibilityof quantifying them. This ability is confirmed through the calculation of correlation coefficients ineach step of the search for the more damaged area. It is also possible to make an assessment of themovement of armour layer units.
Year: 2016
Number Pages:
541
Author(s): Lemos, R.; Loja, M.A.R.; Rodrigues, J.; Rodrigues, J.A.S.
: AIMS Environmental Science
Editor: AIMS Press
Volume:
3(3).
Keywords: Scale model tests; Pphotogrammetric analysis; Rubble-mound breakwaters
Info
Smoothed particle hydrodynamics numerical model for modelling an oscillating water chamber
This paper presents theapplicatio nand thevalidation of the SPH numerical model SPHyCE, based on astandard Smoothed Particle Hydrodynamics formulation, for modeling anonshore oscillating waterchamber, comparing results of amplification factor and phase lag with those obtained by a mesh-basedRANS model .Firstly, ananalysis of the results for differentre solutions (i.e.particle dimension) showedthe independence of results with refinement. Secondly, the amplification factor of mean free surfaceelevation inside th eoscillating water chamber and the phase lag between time series of free surfaceelevation outside and inside the water chamber were analysed. A good agreement was achieved between the mesh free SPHyCE model and the mesh-based RANS model. SPHyCE model was finally applied to analyse the hydrodynamic fluid flow inside and outside the water chamber and to quantify the forces onthe vertical wall and the amplification factor for different incident wave heights for a rough sea state with complex wave breaking, impact loads and overtopping, contributing to the future applications ofSPH models for development and studies of OWC devices.
Year: 2016
Number Pages:
397
Author(s): Didier, E.; Neves, D. R.; Teixeira, P.; Dias, J.; Neves, M. G.
: Ocean Engineering
Editor: Elsevier
Volume:
123.
Keywords: Coastal engineering; Hydrodynamic forces; Wave
|
Comunicação
Info
Application of URANS-VOF models in hydrodynamic study of oscillating water column
This paper presents a comparison of two URANS models based on the VoF approach, FLUENT (Fluent, 2006) and IH2VOF (Lara et al., 2011), to perform a detaiied analysis of the hydrodynamic phenomena outside and inside an open Oscillating Water Coiumn (OWC) device. This analysis is important to determine the ability of each solver in accurate modelling the complex non-linear phenomena which occur in the wave-fluid-structure interaction, in order to use it in the deveiopment of an innovative integrated tool at prototype scale. Numerical results of free surface elevation, oscillating free surface inside the water chamber, amplification factor and phase lag are analysed and compared with experimental data for several incident wave conditions. For an OWC with a fuliy open chamber, good agreement was achieved between experimental data and numerical results obtained with two modeis with different numerical methodologies.
Year: 2016
Number Pages:
209-220pp.
Author(s): Dias, J.; Mendonça, A. C.; Didier, E.; Neves, M. G.; Conde, J. M.; Teixeira, P.
Editor: EdiBios
Keywords: Amplification factor; Oscillating water column; URANS-VOF
Info
Design of scour protections and structural reliability techniques
In order to account for scour problems, protection systems are usually employed around the foundations, i.e. Arklow Bank OWF and Scroby Sands OWF (Whitehouse et al., 2011). Their design is main-ly of semi empiric nature (De Vos et al., 2011) and probabilistic approaches haven
Year: 2016
Number Pages:
527
Author(s): Fazeres-Ferradosa, T.; Taveira-Pinto, F.; Neves, L.; Reis, M. T. L. G. V.
Editor: CRC Press
Keywords: Structural reliability; Monopile foundations; Protections systems; Scour
Info
Design optimization of an oscillating water column wave energy converter: analytical and numerical modeling
An analytical model is applied to a schematic case of an oscillating water column (OWC), without head loss, to obtain a first estimation of the chamber hydraulic efficiency. The IH2VOF numerical model of wave-structure interations is applied to perform an investigation, useful to complement and verify the analytical approach and analyses the flow characteristics on the OWC, including nonlinear effects. The numerical model was validated against physical model tests on a schematic OWC stucture at the National Laboratory of Civil Engineering, presenting god agreement.A significant difference of amplification factor parameter was observed between lhe analytical results and numerical results and experimental data, which may be attributed to the absence of head loss in the analytical model.
Year: 2016
Number Pages:
221-232pp.
Author(s): Mendonça, A. C.; Jalon, M.L.; Correia, R.; Dias, J.; Neves, M. G.; Didier, E.
Editor: EdiBios
Keywords: Numerical modelling; Analytical modelling; Oscillating water column
Info
Ensaios em modelo físico de agitação marítima em redor de um navio livre
Nesta comunicação, descrevem-se os ensaios em modelo físico realizados com o objetivo de caracterizar o campo de ondas em torno de um navio livre, quando sujeito a condições de agitação incidente regular e irregular. Estes dados são especialmente importantes para a validação de modelos numéricos de caracterização da resposta de navios à ação da agitação incidente. Assim, para cada condição de agitação incidente, efetuaram-se medições da elevação da superfície livre e das componentes da velocidade em diversos pontos em redor do navio. Apresentam-se as seguintes análises dos dados experimentais: análise temporal e espetral (espetro de energia e wavelets) dos valores de elevação da superfície livre e análise temporal da velocidade das partículas, a meio da coluna de água. A análise temporal e espetral de cada série de medições obtida permite a caracterização da agitação nos pontos em redor do navio, em termos de alturas, períodos e velocidade. Avalia-se também a influência do navio nas características da agitação.
Year: 2016
Number Pages:
12p.
Author(s): Ramos, A.; Fortes, C. J. E. M.; Pinheiro, L.
Editor: LNEC
Keywords: Análise espetral; Análise temporal; Velocidade; Elevação da superfície livre
Info
Evaluation of wave overtopping consequences for risk assessment. The case study of Praia da Vitória harbour (Azores, Portugal)
This paper aims at presenting two diíferent methodologies to evaluale wave overtopping consequences: the Analytic Hierarchy Process (AHP) and the Analytic Network Process (ANP). The AHP is based on lhe comparison of successive and paired information that was selecled and quantified having in mind its hierarchic prioritization by taking into account lhe estimated relevance of each considered criterion or indicator. The ANP provides a general framework lo deal with decisions without making assumplions about the independence of higher level elements from lower level eiements and about the independence of the elements within a levei. In fact, the ANP uses a network without the need lo specify leveis as in a hierarchy structure iike lhe AHP. Influence is a central concept in the ANP. Applicalion of the AHP and the ANP melhodologies to lhe case study of Praia da Vitória harbour (Azores, Porlugal) is presenied. With the AHP, a consequences level map is obtained.
Year: 2016
Number Pages:
411-422pp.
Author(s): Lourenço, I.; Santos, J. A.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Garcia, T.; Poseiro, P.; Craveiro, J.
Editor: EdiBios
Keywords: Analytic Network Process (ANP); Analytic Hierarchy Process (AHP); Risk assessment; Consequences overtopping; Wave overtopping
Info
Investigating the use of a video technique for wave run-up measurements on a breakwater in a laboratory flume
Wave run-up parameters are key factors in studying coastal flooding. An experiment was performed at LNEC to study wave run-up and overtopping on a breakwater.This work investigates the possibility of measuring wave run-up by using a video-monitoring technique.Water level oscillations were identified on the breakwater slope over time. Wave run-up was marked on each timestack image produced for each test.Run-up events were identified and related to the surf similarity parameter. Properties of wave run-up derived from video imagery were analysed and compared to data from a wave gauge placed over the breakwater cross-section. Results confirmed that the video imagery technique is an alternative technique for measuring run-up in physical model experiments.
Year: 2016
Number Pages:
478-480pp.
Author(s): Andriolo, U.; Poseiro, P.; Reis, M. T.; Bastos, A.P.; Fortes, C. J. E. M.; Garcia, T.
Editor: Instituto Hidrográfico
Keywords: Timestack; Image processing; Physical model; Overtopping; Run-up; Hydrodynamics
Info
Metodologia de análise e correção de medições de componentes de velocidade por ADV para propagação de ondas
Neste artigo apresenta-se uma metodologia que visa minimizar os erros associados à medição por ADV (Acoustic Doppler Velocimetry). Estes erros podem ter duas causas: insuficiência de partículas em suspensão na coluna de água; e desalinhamento dos eixos do ADV com os eixos coordenados do problema. Seguindo esta metodologia, aplica-se primeiramente um filtro digital para eliminar as frequências elevadas fisicamente irrealistas e, em seguida, aplica-se uma transformação de coordenadas para alinhar as componentes de velocidade medidas com o sistema de coordenadas do problema, sendo possível identificar o desalinhamento do ADV face a esse sistema de coordenadas.Apresenta-se a aplicação desta metodologia na propagação de ondas regulares num canal.
Year: 2016
Number Pages:
101-104pp.
Author(s): Conde, J. M.; Neves, C. F.; Fortes, C. J. E. M.
Editor: Instituto Hidrográfico
Keywords: Canal de ondas; Ondas regulares; Transformação de coordenadas; Filtro digital; ADV
Info
Modelação física em canal da propagação de ondas na Praia da Galé, Algarve
Para a praia da Galé, Algarve, foram efetuados um conjunto de ensaios em modelo físico (canal de ondas) com o principal objetivo de analisar a hidrodinâmica da propagação de ondas sobre um fundo rochoso, para várias condições de agitação regular e irregular incidente. Efetuaram-se medições da elevação da superfície livre com sondas resistivas ao longo do canal e das componentes da velocidade com ADV, a meio da coluna de água em várias secções ao longo do canal. A evolução dos resultados ao longo do canal permite um melhor conhecimento do processo de propagação e contribui com dados para a validação de modelos numéricos.
Year: 2016
Number Pages:
463-466pp.
Author(s): Ramos, A.; Fortes, C. J. E. M.; Conde, J. M.; Gabriel. S.; Reis, R.
Editor: Instituto Hidrográfico
Keywords: Análise espectral; Análise temporal; Canal de ondas; Praia da Galé; Modelação física
Info
Numerical simulation of the motions and forces of a moored ship in Leixões harbour
Ships berthed inside sheltered basins can experience excessive movements due to waves. The paper presents an integrated numerical tool that interconnects several numerical models to reproduce the most relevant physical phenomena associated to wave action on a moored ship, the resulting ship movements and the forces on mooring lines and fenders. A new methodology was developed to determine the hydrodynamic forces on the ship.A non-linear phase resolving Boussinesq model is used to propagate waves from outside the harbour to wherever desired location inside the harbour. A modified version of a 3D panel method model computes the hydrodynamic coefficients of the ship, whereas the Haskind relations determine the wave forces on the ship. The time series of the moored ship motions and forces on moorings are obtained with another numerical model. This new methodology is used to replicate the scale model tests of a moored tanker inside Leixões Harbour.
Year: 2016
Number Pages:
217-223pp.
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Rosa-Santos, P.
Editor: Taylor & Francis Group
Keywords: Harbour; Leixões; Forces on mooring lines; Wave propagation; Moored ship
Info
O papel da modelação física no apoio aos estudos de engenharia costeira e portuária. Desafios e oportunidades
Neste artigo, apresenta-se uma descrição do papel da modelação física no apoio aos estudos de Engenharia Costeira e Portuária, ilustrando-se as suas potencialidades com exemplos de casos de estudo.Referem-se os contributos inovadores em conceitos, equipamentos, técnicas e procedimentos experimentais que têm sido desenvolvidos nos recentes anos. Assim, apresentam-se metodologias a explorar no futuro, tais como procedimentos destinados a facilitar, agilizar e automatizar as análises de estabilidade e galgamentos de quebra-mares, assim como dos danos no manto protetor, provocados pela agitação marítima nele incidente, e o acesso remoto a ensaios experimentais, e à informação associada à realização destes, a clientes/investigadores interessados.Por fim, são apontados cenários de desenvolvimento para a modelação física de modo a lidar com as consequências das alterações climáticas, e que incorporem: a) sequências de eventos de temporal, incluindo efeitos cumulativos, b) a subida do nível médio do mar; c) técnicas de medição não intrusivas que permitam obter a análise de fenómenos complexos, com características de grande variabilidade temporal e espacial, sem interferir nos mesmos ou no próprio sistema modelado.
Year: 2016
Number Pages:
13p.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Pinheiro, L.; Reis, M. T. L. G. V.
Editor: LNEC
Keywords: Engenharia costeira e portuária; Desafios e oportunidades; Casos de estudo; Modelação física
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
An integrated harbour navigation control system. NATO Po-Navigation. Adenda ao "Project Plan" proposto ao "Programa Ciência para a Estabilidade. Fase III" da OTAN
N/A
Year: 1994
Author(s): Covas, J. A.
Info
Cais da Calheta, Ilha de S. Jorge - Açores. Memorando
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido de uma protecção marítima aderente.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios tridimensionais de estabilidade e galgamentos do molhe de protecção do porto de recreio náutico do porto de Sines.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Análise das condições do porto de Sines. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Selecção de locais viáveis. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Ligação da lagoa de Óbidos ao mar - Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Carvalho, M. M.; Capitão, R.; Fortes, C. J. E. M.; Covas, J. A.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Coimbra.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.; Capitão, R.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Palma de Maiorca.
N/A
Year: 1994
Author(s): Covas, J. A.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|