Papers
Info
Projeto BSAFE4SEA - Controlo da segurança de quebra-mares através da análise de um sistema de previsão e apoio à decisão - Metodologia e resultados
Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto
Year: 2022
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Santos, J. A.; Capitão, R.; Pinheiro, L.; Lemos, R.; Andriolo, U.; Soares, F.; Henriques, M. J.; Reis, M. T. L. G. V.
Editor: INEGI/FEUP
Keywords: apoio à decisão; previsão; dano; quebra-mares de talude; BSafe4Sea
Info
Projeto TO-SEALERT. Desenvolvimentos recentes
O projeto To-SEAlert tem como objetivo a inclusão de um conjunto de ferramentas/metodologias de modo a tornar o sistema HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) mais eficiente, fiável e robusto. Essas ferramentas incluem o uso de imagens de satélite e de vídeo, de modelação numérica e física, métodos quantitativos e probabilísticos para a avaliação do risco e planeamento de emergência, para melhorar a eficiência e a confiança no sistema, bem como proporcionar a sua validação. Este projeto tem como objetivo principal a implementação de um sistema que seja capaz de apoiar as autoridades responsáveis na monitorização, prevenção e gestão de situações de emergência. Este artigo apresenta o trabalho desenvolvido recentemente nas diferentes tarefas do projeto, entre o qual se pode destacar o desenvolvimento do protótipo do sistema para a zona costeira da Costa da Caparica, a validação do protótipo do porto da Ericeira com recurso a imagens de vídeo-monitorização, o teste de modelos numéricos para o cálculo do galgamento, e a implementação de metodologias de avaliação quantitativa das consequências do risco.
Year: 2022
Author(s): Zózimo, A. C.; Fortes, C. J. E. M.; Santos, J. A.; Pinheiro, L.; Lemos, R.; Capitão, R.; Fonseca, A. M.; Roque, D.; Taborda, R.; Silva, A.; Serrazina, V.; Craveiro, J.; Reis, M. T. L. G. V.; Andriolo,
Editor: PIANC
Info
SAFEPORT-SINES. SISTEMA DE SEGURANÇA PARA O PORTO DE SINES
O SAFEPORT-SINES é um sistema de previsão e alerta para a segurança da navegação em zonas portuárias, englobando situações de emergência associadas a navios em trânsito ou amarrados, devidas a condições meteo-oceanográficas extremas. O sistema fornece previsões com 3 dias de antecedência da agitação marítima, das condições de vento e de maré, assim como dos movimentos dos navios, identificando as situações que possam ter consequências gravosas nos navios em manobra ou amarrados dentro do porto. Os níveis de risco associados baseiam-se em critérios de segurança e de operacionalidade, nomeadamente nos movimentos do navio e nos esforços nos elementos de amarração. Neste trabalho apresenta-se o sistema SAFEPORT em termos do seu desenvolvimento e arquitetura, do fluxo e tratamento de dados e do funcionamento dos modelos numéricos utilizados. Apresenta-se ainda o funcionamento da plataforma web e da aplicação móvel onde é possível consultar os parâmetros relevantes para aferir os riscos referidos
Year: 2022
Author(s): Santos, J. A.; Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Guedes Soares, C.
Editor: PIANC
Info
Safety System for Ships in Harbours
SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.
Year: 2022
Author(s): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.
Editor: E. Rizzuto and V. Ruggiero (Eds.)
Keywords: Risk assessment; storm Dora; Moored ships; Wave propagation; SWAMS; SAFEPORT
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Year: 2022
Author(s): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: PIANC
Keywords: fenders; docking; ship; Physical model
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Year: 2022
Author(s): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: TEST&E2022
Keywords: fenders; docking; ship; Physical model
Info
SEAlert project. Validation
The To-SEAlert project (Fortes et al., 2021) aims to include a set of tools/methodologies into the Early Warning System HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) to make it more efficient, reliable and robust.
Year: 2022
Author(s): Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.; Lemos, R.; Capitão, R.; Taborda, R.; Reis, M. T. L. G. V.; Andriolo, U.; Ferreira, J.; Santos, C.; DUARTE, C.M.
Editor: 16th International Conference Littoral22
Info
SHIP IMPACT ON FENDERS. NUMERICAL MODEL VALIDATION USING EXPERIMENTAL MODELLING TESTS
Marine fenders provide the necessary interface between berthing ships and berth structures (PIANC, 2002). Their absence can cause damage to either the quay or the ship or both the quay and the ship, endangering lives, and property. Due to the complex hydrodynamics around berthing ships, the characterization of the maximum force applied to an individual fender and the force distribution among a set of fenders is an essential factor in the design and safety of maritime structures and the fenders themselves, as well as for improving existing ones. This paper aims to describe a combining physical and numerical modelling of a ship impact on fenders, in order to improve the numerical modelling of this problem.Physical modelling represents a good practice in hydraulic studies, where a scale model is used to reproduce complex dynamic phenomena. However, the use of a sophisticated numerical model (or a package of numerical models) can provide a good means to evaluate the samecomplex physical processes and, in addition, to design and test a large number of alternatives in a short time span.Both types of models have their strengths and weaknesses (Gerritsen and Sutherland, 2011). Physical models provide a natural reproduction of complex non-linear physical phenomena, therefore they are well established and considered to be truthful. On the other hand, these models can be expensive and time consuming. In addition, one has to deal with the scale effect and measurement difficulties and errors are frequent. Numerical models in turn are very efficient to simulate rapidly many physical processes and the results can be easily extracted. On the other hand, to improve the reliability of their use in practice, it is necessary to calibrate several parameters through physical model measurements and field experiments. In order to take advantage of the potentiality of the two models emerged the composite modelling which is the integrated and balanced use of physical and numerical models (Gerritsen and Sutherland, 2011). This technique also costs but provides results with a better quality than those model techniques separately and increases the confidence in the use of numerical models.The physical modeling consists of a ship scaled model, whose impact on the fenders was performed in a wave basin. Various impact velocities and angles between the ship axis and the fenders alignment were used to represent possible collision conditions. The same conditions were reproduced by a numerical package. The numerical modeling was performed using MOORNAV (Santos, 1994), which estimates the ship motions and the forces exerted on the elements of the mooring system, namely mooring lines and fenders.
Year: 2022
Author(s): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.; Simão, J.; Costa, C.E.B.C.
Editor: PIANC
Keywords: Physical Modelling; Numerical Modelling; GulfStream Ship; Fenders; Composite modelling
Info
Simulação com o SAFEPORT do impacto da tempestade Célia nos navios amarrados no porto de Sines
Esta comunicação diz respeito à fase de testes do sistema SAFEPORT, tendo-se avaliado o seu desempenho numa situação de tempestade. Trata-se de um sistema desenvolvido para a segurança da navegação do porto de Sines, e, mais concretamente, nos seus terminais de Granéis Líquidos, Multiusos e Contentores. Para estes terminais, simulou-se o impacto da tempestade Célia nos esforços nos cabos de amarração de um navio petroleiro, de um navio de carga geral e de um navio porta contentores, respetivamente. O sistema SAFEPORT demonstrou ser capaz de antecipar os efeitos nos navios amarrados dos estados de agitação associados à tempestade Célia.
Year: 2022
Author(s): Gomes, A.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.
Editor: 7as Jornadas de Engenharia Hidrográfica / 2as Jornadas Luso-Espanholas de Hidrografia
Keywords: tempestade Célia; SAFEPORT; Sines; navios amarrados
Info
Structural monitoring of a breakwater using UAVs and photogrammetry
The present project addresses a problem related to the erosion effects on a breakwater barrier due to waves which leads to its degradation and that may eventually lead to lack of functionality of the structure. In the present case, the breakwater acts as a physical barrier between the Atlantic Ocean and the cargo Harbour of Leixões, in Matosinhos, Portugal, justifying the needs of health monitoring of the barrier.To monitor this structure, with a length of roughly 700 m, the need of a fast data acquisition system led to the choice of imaging techniques which allow for a fast acquisition of a diversified data set. The images were acquired using a high-resolution camera attached to an unmanned aerial vehicle (UAV), enabling a faster and more automated procedure that leads to the systematization of the process, while being compatible with the difficult accessibility of the structure, which is surrounded by sea waves. Point clouds corresponding to the breakwater
Year: 2022
Author(s): Sousa, P.; Cachaço, A.; Barros, F.; Tavares, P.; Moreira, P.; Capitão, R.; Neves, M. G.; Franco, E.
: Procedia Structural Integrity
Editor: ELSEVIER
Keywords: Breakwater monitoring; Unmanned aerial vehicle; Photogrammetry
|
Comunicação
Info
Application of URANS-VOF models in hydrodynamic study of oscillating water column
This paper presents a comparison of two URANS models based on the VoF approach, FLUENT (Fluent, 2006) and IH2VOF (Lara et al., 2011), to perform a detaiied analysis of the hydrodynamic phenomena outside and inside an open Oscillating Water Coiumn (OWC) device. This analysis is important to determine the ability of each solver in accurate modelling the complex non-linear phenomena which occur in the wave-fluid-structure interaction, in order to use it in the deveiopment of an innovative integrated tool at prototype scale. Numerical results of free surface elevation, oscillating free surface inside the water chamber, amplification factor and phase lag are analysed and compared with experimental data for several incident wave conditions. For an OWC with a fuliy open chamber, good agreement was achieved between experimental data and numerical results obtained with two modeis with different numerical methodologies.
Year: 2016
Number Pages:
209-220pp.
Author(s): Dias, J.; Mendonça, A. C.; Didier, E.; Neves, M. G.; Conde, J. M.; Teixeira, P.
Editor: EdiBios
Keywords: Amplification factor; Oscillating water column; URANS-VOF
Info
Design of scour protections and structural reliability techniques
In order to account for scour problems, protection systems are usually employed around the foundations, i.e. Arklow Bank OWF and Scroby Sands OWF (Whitehouse et al., 2011). Their design is main-ly of semi empiric nature (De Vos et al., 2011) and probabilistic approaches haven
Year: 2016
Number Pages:
527
Author(s): Fazeres-Ferradosa, T.; Taveira-Pinto, F.; Neves, L.; Reis, M. T. L. G. V.
Editor: CRC Press
Keywords: Structural reliability; Monopile foundations; Protections systems; Scour
Info
Design optimization of an oscillating water column wave energy converter: analytical and numerical modeling
An analytical model is applied to a schematic case of an oscillating water column (OWC), without head loss, to obtain a first estimation of the chamber hydraulic efficiency. The IH2VOF numerical model of wave-structure interations is applied to perform an investigation, useful to complement and verify the analytical approach and analyses the flow characteristics on the OWC, including nonlinear effects. The numerical model was validated against physical model tests on a schematic OWC stucture at the National Laboratory of Civil Engineering, presenting god agreement.A significant difference of amplification factor parameter was observed between lhe analytical results and numerical results and experimental data, which may be attributed to the absence of head loss in the analytical model.
Year: 2016
Number Pages:
221-232pp.
Author(s): Mendonça, A. C.; Jalon, M.L.; Correia, R.; Dias, J.; Neves, M. G.; Didier, E.
Editor: EdiBios
Keywords: Numerical modelling; Analytical modelling; Oscillating water column
Info
Ensaios em modelo físico de agitação marítima em redor de um navio livre
Nesta comunicação, descrevem-se os ensaios em modelo físico realizados com o objetivo de caracterizar o campo de ondas em torno de um navio livre, quando sujeito a condições de agitação incidente regular e irregular. Estes dados são especialmente importantes para a validação de modelos numéricos de caracterização da resposta de navios à ação da agitação incidente. Assim, para cada condição de agitação incidente, efetuaram-se medições da elevação da superfície livre e das componentes da velocidade em diversos pontos em redor do navio. Apresentam-se as seguintes análises dos dados experimentais: análise temporal e espetral (espetro de energia e wavelets) dos valores de elevação da superfície livre e análise temporal da velocidade das partículas, a meio da coluna de água. A análise temporal e espetral de cada série de medições obtida permite a caracterização da agitação nos pontos em redor do navio, em termos de alturas, períodos e velocidade. Avalia-se também a influência do navio nas características da agitação.
Year: 2016
Number Pages:
12p.
Author(s): Ramos, A.; Fortes, C. J. E. M.; Pinheiro, L.
Editor: LNEC
Keywords: Análise espetral; Análise temporal; Velocidade; Elevação da superfície livre
Info
Evaluation of wave overtopping consequences for risk assessment. The case study of Praia da Vitória harbour (Azores, Portugal)
This paper aims at presenting two diíferent methodologies to evaluale wave overtopping consequences: the Analytic Hierarchy Process (AHP) and the Analytic Network Process (ANP). The AHP is based on lhe comparison of successive and paired information that was selecled and quantified having in mind its hierarchic prioritization by taking into account lhe estimated relevance of each considered criterion or indicator. The ANP provides a general framework lo deal with decisions without making assumplions about the independence of higher level elements from lower level eiements and about the independence of the elements within a levei. In fact, the ANP uses a network without the need lo specify leveis as in a hierarchy structure iike lhe AHP. Influence is a central concept in the ANP. Applicalion of the AHP and the ANP melhodologies to lhe case study of Praia da Vitória harbour (Azores, Porlugal) is presenied. With the AHP, a consequences level map is obtained.
Year: 2016
Number Pages:
411-422pp.
Author(s): Lourenço, I.; Santos, J. A.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Garcia, T.; Poseiro, P.; Craveiro, J.
Editor: EdiBios
Keywords: Analytic Network Process (ANP); Analytic Hierarchy Process (AHP); Risk assessment; Consequences overtopping; Wave overtopping
Info
Investigating the use of a video technique for wave run-up measurements on a breakwater in a laboratory flume
Wave run-up parameters are key factors in studying coastal flooding. An experiment was performed at LNEC to study wave run-up and overtopping on a breakwater.This work investigates the possibility of measuring wave run-up by using a video-monitoring technique.Water level oscillations were identified on the breakwater slope over time. Wave run-up was marked on each timestack image produced for each test.Run-up events were identified and related to the surf similarity parameter. Properties of wave run-up derived from video imagery were analysed and compared to data from a wave gauge placed over the breakwater cross-section. Results confirmed that the video imagery technique is an alternative technique for measuring run-up in physical model experiments.
Year: 2016
Number Pages:
478-480pp.
Author(s): Andriolo, U.; Poseiro, P.; Reis, M. T.; Bastos, A.P.; Fortes, C. J. E. M.; Garcia, T.
Editor: Instituto Hidrográfico
Keywords: Timestack; Image processing; Physical model; Overtopping; Run-up; Hydrodynamics
Info
Metodologia de análise e correção de medições de componentes de velocidade por ADV para propagação de ondas
Neste artigo apresenta-se uma metodologia que visa minimizar os erros associados à medição por ADV (Acoustic Doppler Velocimetry). Estes erros podem ter duas causas: insuficiência de partículas em suspensão na coluna de água; e desalinhamento dos eixos do ADV com os eixos coordenados do problema. Seguindo esta metodologia, aplica-se primeiramente um filtro digital para eliminar as frequências elevadas fisicamente irrealistas e, em seguida, aplica-se uma transformação de coordenadas para alinhar as componentes de velocidade medidas com o sistema de coordenadas do problema, sendo possível identificar o desalinhamento do ADV face a esse sistema de coordenadas.Apresenta-se a aplicação desta metodologia na propagação de ondas regulares num canal.
Year: 2016
Number Pages:
101-104pp.
Author(s): Conde, J. M.; Neves, C. F.; Fortes, C. J. E. M.
Editor: Instituto Hidrográfico
Keywords: Canal de ondas; Ondas regulares; Transformação de coordenadas; Filtro digital; ADV
Info
Modelação física em canal da propagação de ondas na Praia da Galé, Algarve
Para a praia da Galé, Algarve, foram efetuados um conjunto de ensaios em modelo físico (canal de ondas) com o principal objetivo de analisar a hidrodinâmica da propagação de ondas sobre um fundo rochoso, para várias condições de agitação regular e irregular incidente. Efetuaram-se medições da elevação da superfície livre com sondas resistivas ao longo do canal e das componentes da velocidade com ADV, a meio da coluna de água em várias secções ao longo do canal. A evolução dos resultados ao longo do canal permite um melhor conhecimento do processo de propagação e contribui com dados para a validação de modelos numéricos.
Year: 2016
Number Pages:
463-466pp.
Author(s): Ramos, A.; Fortes, C. J. E. M.; Conde, J. M.; Gabriel. S.; Reis, R.
Editor: Instituto Hidrográfico
Keywords: Análise espectral; Análise temporal; Canal de ondas; Praia da Galé; Modelação física
Info
Numerical simulation of the motions and forces of a moored ship in Leixões harbour
Ships berthed inside sheltered basins can experience excessive movements due to waves. The paper presents an integrated numerical tool that interconnects several numerical models to reproduce the most relevant physical phenomena associated to wave action on a moored ship, the resulting ship movements and the forces on mooring lines and fenders. A new methodology was developed to determine the hydrodynamic forces on the ship.A non-linear phase resolving Boussinesq model is used to propagate waves from outside the harbour to wherever desired location inside the harbour. A modified version of a 3D panel method model computes the hydrodynamic coefficients of the ship, whereas the Haskind relations determine the wave forces on the ship. The time series of the moored ship motions and forces on moorings are obtained with another numerical model. This new methodology is used to replicate the scale model tests of a moored tanker inside Leixões Harbour.
Year: 2016
Number Pages:
217-223pp.
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Rosa-Santos, P.
Editor: Taylor & Francis Group
Keywords: Harbour; Leixões; Forces on mooring lines; Wave propagation; Moored ship
Info
O papel da modelação física no apoio aos estudos de engenharia costeira e portuária. Desafios e oportunidades
Neste artigo, apresenta-se uma descrição do papel da modelação física no apoio aos estudos de Engenharia Costeira e Portuária, ilustrando-se as suas potencialidades com exemplos de casos de estudo.Referem-se os contributos inovadores em conceitos, equipamentos, técnicas e procedimentos experimentais que têm sido desenvolvidos nos recentes anos. Assim, apresentam-se metodologias a explorar no futuro, tais como procedimentos destinados a facilitar, agilizar e automatizar as análises de estabilidade e galgamentos de quebra-mares, assim como dos danos no manto protetor, provocados pela agitação marítima nele incidente, e o acesso remoto a ensaios experimentais, e à informação associada à realização destes, a clientes/investigadores interessados.Por fim, são apontados cenários de desenvolvimento para a modelação física de modo a lidar com as consequências das alterações climáticas, e que incorporem: a) sequências de eventos de temporal, incluindo efeitos cumulativos, b) a subida do nível médio do mar; c) técnicas de medição não intrusivas que permitam obter a análise de fenómenos complexos, com características de grande variabilidade temporal e espacial, sem interferir nos mesmos ou no próprio sistema modelado.
Year: 2016
Number Pages:
13p.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Pinheiro, L.; Reis, M. T. L. G. V.
Editor: LNEC
Keywords: Engenharia costeira e portuária; Desafios e oportunidades; Casos de estudo; Modelação física
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
An integrated harbour navigation control system. NATO Po-Navigation. Adenda ao "Project Plan" proposto ao "Programa Ciência para a Estabilidade. Fase III" da OTAN
N/A
Year: 1994
Author(s): Covas, J. A.
Info
Cais da Calheta, Ilha de S. Jorge - Açores. Memorando
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido de uma protecção marítima aderente.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios tridimensionais de estabilidade e galgamentos do molhe de protecção do porto de recreio náutico do porto de Sines.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Análise das condições do porto de Sines. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Selecção de locais viáveis. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Ligação da lagoa de Óbidos ao mar - Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Carvalho, M. M.; Capitão, R.; Fortes, C. J. E. M.; Covas, J. A.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Coimbra.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.; Capitão, R.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Palma de Maiorca.
N/A
Year: 1994
Author(s): Covas, J. A.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|