Papers
Info
Defining suitable Safe System projects: The experience of the SaferAfrica project in five African countries
When dealing with road safety in Africa, one should bear in mind that road safety problems need to be seen in their context as the solutions proposed to address them. While it is relevant to consider international good practices, African stakeholders should become owners of the interventions addressing their problems and take the responsibility for developing and implementing the appropriate solutions, taking advantage of suitable technical assistance, if needed. Based on these considerations, in this paper, a presentation is made of the process used in the European research project SaferAfrica to define suitable Safe System projects in Africa. This project aims at supporting policymakers and stakeholders with evidence on critical risk factors, related actions, and good practices drawn from high-quality data and knowledge. In the project, road safety and traffic management capacity reviews at the country level were carried out in five countries (Cameroon, Burkina Faso, Tunisia, Kenya, and South Africa), following the World Bank guidelines. After conducting such a capacity review, these guidelines recommend the preparation and implementation of Safe System projects, stand-alone, multisector initiatives targeting high-risk corridors and areas, with outcomes large enough to be reliably measured. In SaferAfrica, this approach aims at facilitating the implementation of Safe System projects in the considered countries, by identifying detailed short-term improvement plans and producing contextualized terms of reference for some interventions per selected country. These interventions are remedial, they address high-priority concerns and demonstrate the viability of high potential gains within current administrative and legislative frameworks. To design interventions suitable to the existing context, the transferability audit tool was adopted within a participative process, involving all possible interested parties, from the institutions to NGOs. Results from the process are presented and discussed.
Year: 2021
Number Pages:
14.
Author(s): Schermers, G.; Cardoso, J. L.
: IATSS Research
Editor: Elsevier Ltd.
Volume:
316.
Keywords: Políticas de transportes; Gestão de segurança; Visão zero; Sistema seguro; Segurança rodoviária
Info
Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models
Introduction: Roadway departure (RwD) crashes, comprising run-off-road (ROR) and cross- median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash.in a crash. Method: In this we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years (20102014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administrations Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.
Year: 2021
Number Pages:
161-169.
Author(s): Roque, C. A.; Jalayer, M.; Hasan, A.S
: Journal of Safety Research
Editor: Elsevier
Volume:
Volume 77.
Keywords: Crash severity model; Mixed logit model; Run-off-road; Roadway departure
Info
Asessing multimodal mobility trends using heterogeneous data sources: a case study for supporting sustainable mobility policy goals within the Algarve region
This paper is built around a research project developed with the support of the Regional Planning Authority of the Algarve Region in Portugal which assessed mobility patterns covering all modes of transport using heterogeneous data sources (time-series data). Data mining techniques helped to identify limitations in some data sets. The econometric analysis showed that integrated autoregressive models and moving averages for series with seasonality were successful in the prediction of passenger flows using time-series data gathered by the regional authority from transport operators and other entities. Results from the analysis are useful to support a strategy to reverse current trends on continued car growth (along with public transport decrease) and to devise policy measures to enable a sustainable mobility path towards decarbonisation and social equity goals until 2030.
Year: 2019
Number Pages:
12p.
Author(s): Arsénio, E.; Silva, S.; Pereira, H.; Domingues, A.
Editor: Elsevier
Keywords: Big data; Decarbonisation; Multimodal mobility; Trend analysis; Passenger flow prediction models; Sustainable mobility
Info
Improving roadside design policies for safety enhancement using hazard-based duration modeling
Roadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. Nationwide, from 2014 to 2016, annual RwD crashes accounted for 53% of all motor vehicle traffic fatalities. Several factors may cause a driver leave the travel lane, including an avoidance maneuver and inattention or fatigue. Roadway and roadside geometric design features (e.g., lane widths and clear zones) play a significant role in whether human error results in a crash. In this paper, we present a hazard-based duration model to investigate the distance traveled by an errant vehicle in a run-off-road crash, the stopping hazard rates, and associated risk factors. For this study, we obtained five years' (20102014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. The results indicate that over 50% of the observed vehicles traveled no more than 36 ft. in a ROR crash and 25% of the observed vehicles traveled at least 78 ft. We also found that seasonal, roadway, and crash variables, along with vehicle information and driver characteristics significantly contributed to the distances traveled by errant vehicles in ROR crashes. This paper presents methodological empirical evidence that the Cox proportional-hazards model is appropriate for investigating the distances traveled by errant vehicles in ROR crashes. In addition, it also provides valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles.
Year: 2018
Number Pages:
165-173pp..
Author(s): Roque, C. A.; Jalayer, M.
: Accident Analysis and Prevention
Editor: Elsevier
Volume:
120.
Keywords: Forgiving roadside; Roadside design; Cox model; Run-off-road crash; Hazard-based duration model
Info
Portuguese mainland road network safety performance indicator
Stepping away from traditional crash-based road safety measurements, several safety performance indicators (SPI) have been proposed in the past few years. SPI can incorporate quantitative and qualitative information on specific aspects that are known to have influence in the safety levels and, not only measure the influence of various safety interventions but also enable comparisons between different road systems. This paper presents the results of the application of a road network SPI to the entire Portuguese road network. This SPI aims at evaluating at the network level, if the connections between urban centres within a region are made by the adequate type of roads regarding generic safety criteria. To this end, the connections to be assessed were classified into pre-defined theoretical safety classes, based on the population of the connected urban centres. Then, the observed safety class of these connections was assessed according to the characteristics of their cross-section and associated road environment of the existing connection between the two urban centres. If the observed class is ensured by a road of higher or equal class than the pre-defined theoretical level in all its extension, the link is considered to be of the appropriate class. For each connection, the results of its evaluation are expressed as a binary value: 0 when the class is not appropriate; and 1 when it is appropriate. The evaluation results are weighted by the road length and aggregated by connection class and throughout the whole road network. The results show a satisfactory network configuration with an SPI of 94% connections with class equal to or higher than the adequate for the type of connection between urban centres they established. The above insights can help in the identification of potential operational inconsistencies that may require safety-related interventions and used for international benchmarks against existing SPI evaluations.
Year: 2018
Number Pages:
416-422pp.
Author(s): Vieira Gomes, S.; Cardoso, J. L.; Lima Azevedo, C.
: Case Studies on Transport Policy
Editor: ELSEVIER
Volume:
Volume 6, Issue 3.
Keywords: Road network; Spatial analysis; Geographic information system; Safety performance indicator
Info
Assessing intermodal freight transport scenarios bringing the perspective of key stakeholders
This paper extends the previous R&D project on the evaluation of intermodal freight transport scenarios (seamless multimodal logistic chains) centered in the Port of Sines in Portugal where a set of alternative investment options were compared: (i) maritime maritime (short-sea-shipping); (ii) maritime-road; (iii) maritime-rail; (iv) maritime-rail-air. This paper aims to bring the perspective of key stakeholders gathered in a specific workshop and assesses the impact of their views in the evaluation of options. The impact analysis focuses on most critical operational and environmental variables, namely shipping speed and CO2 emissions.
Year: 2017
Number Pages:
900-915pp.
Author(s): Prata, J.; Arsénio, E.
: Transportation Research Procedia
Editor: Elsevier
Volume:
25C.
Keywords: Corporate social responsability; CO2 emissons; Shipping speed; Freight transport costs; Intermodal transport
Info
Assessing the market potential of electric bicycles and ICT for low carbon school travel: a case study in the smart city of Águeda
Electric bikes (e-bikes) may help in transport decarbonisation in European cities. To fully assess the market potential of e-bikes, further research is needed to understand users preferences and the range of factors that can contribute for people to shift from car use to low carbon vehicles such as e-bikes. This paper is built on the Be4Schools R&D project implemented in the city of Águeda which is considered the first smart city in Portugal. It comprised the former study in the country that examined the willingness of students (aged 15-21 years) to use e-bikes for daily trips to school and that gathered their preferences towards specific ICT related attributes. The methodology comprised a mobility survey and a stated-choice experiment (SC). The SC experiment gathered 2232 observations which were able to provide the relevant attribute trade-off information between car travel and e-bike (with or without specific ICT equipment). An extensive econometric analysis was performed to assess the nature and extent of students heterogeneity of preferences which also considered gender issues. The study aimed to contribute to the regional economic cluster on powered two-wheels' industry & innovation. Research results are interesting for city mobility policies and the regional industry as the possible integration of ICT equipment in e-bikes may speed up the market uptake of this technology.
Year: 2017
Number Pages:
12p.
Author(s): Arsénio, E.; Dias, J.; Azeredo Lopes, S.; Pereira, H.
: Transportation Research Procedia
Editor: Elsevier
Keywords: Sustainable urban mobility; Low carbon transport; Electric bicycles; Cycling to school
Info
Sustainable urban mobility plans:bridging climate change and equity targets?
The European Commission (EC) introduced the concept of Sustainable Urban Mobility Plans (SUMPs) as a new planning paradigm with a focus on peoples needs - Planning for people. This represents a change from traditional planning approaches centred on motorized road traffic/infrastructure provision and a shift towards more sustainable transport options. SUMPs require a long-term and sustainable vision for cities and these are to pay special attention to the participation of citizens and stakeholders and to coordination of policies across sectors (transport, land use, health, energy, and so on). The EC guidelines on developing and implementing SUMPs (EC, 2013) establish the following primary objectives of this new way of planning urban mobility: accessibility and quality of life, as well as sustainability, economic viability, social equity, health and environment quality. Since urban areas in Europe account for 23% to 25% of CO2 emissions from transport (EC, 2013c; EEA, 2014), SUMPs are expected to contribute to meet long-term climate change policy goals. However, it is less clear how SUMPs can contribute to address key societal challenges such as equity issues in accessibility. According to the EC guidelines SUMPs are still non-existing concepts in most European member states. However, several cities in Europe and beyond have already formulated and adopted SUMPs. This paper builds on a review of voluntary SUMPs developed in Portugal. A sample of forty case studies is considered in the analysis. It aims: a) to understand how climate change goals and equity issues in accessibility have been addressed through the first generation of SUMPs; b) to reflect on the role of SUMPs as tools to answer climate change goals without putting at risk social equity issues, and c) to outline further research needs in the SUMP approach. The research results are expected to give insights into social equity needs in urban transport and climate change adaptation policies in Europe.
Year: 2016
Number Pages:
22p.
Author(s): Arsénio, E.; Martens, K.; Di Ciommo, F.
: Research in Transportation Economics
Editor: Elsevier
Volume:
462.
Keywords: Urban transport policy; Equity in transport; Sustainable urban mobility plans; Climate change
Info
A ESTIMATIVA DE FREQUÊNCIAS ESPERADAS DE ACIDENTES NA IDENTIFICAÇÃO DE ZONAS DE ACUMULAÇÃO DE ACIDENTES
Neste artigo são apresentadas ferramentas destinadas ao planeamento e gestão das redes viárias que consideram explicitamente a segurança dos utentes vulneráveis. Essas ferramentas referem-se à criação de uma base de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, que permitiu a definição de mapas digitais, com possibilidade de uma grande diversidade de consultas; ao desenvolvimento de modelos de estimativa de frequência de acidentes para redes urbanas, em função de características do elemento rodoviário, que incorporam dados de exposição de utentes vulneráveis de forma a melhorar a capacidade de estimativa da sinistralidade em redes urbanas e á sua aplicação na identificação de zonas de acumulação de acidentes.
Year: 2015
Author(s): Vieira Gomes, S.
: Revista Portuguesa de Sinalização
Editor: AFESP
Volume:
Número 6.
Keywords: Segmentos urbanos; Intersecções urbanas; Acidentes rodoviários; Modelação linear generalizada; Modelos de edtimativa de frequência de acidentes; SIG
Info
Dealing with uncertainty in detailed calibration of traffic simulation models for safety assessment
With the increasing level of detail of traffic simulation models, the need for a consistent understanding of simulators performance and the adequate calibration and validation procedures to control uncertainty is crucial, particularly in applications focusing on complex driving behaviour and detailed outputs, such as road safety analysis. In this work the calibration of traffic microscopic simulation models for safety analysis is analyzed considering four different key uncertainty sources: the input data, the calibration methodology, the model structure and its parameters, and the output data. The use of a multi-step sensitivity analysis (SA) framework is proposed and applied to the simulation of an urban motorway scenario, using a complex traffic simulation model with more than one hundred parameters. A three-level analysis is presented: (1) different advanced SA and calibration methods are described, compared and integrated in a multi-step global SA framework; (2) the proposed method is tested using both vehicle trajectory and aggregated traffic data to assess the impact of model parameters uncertainty and different types of input data on relevant outputs; and (3) accident and non-accident scenario-specific calibrations are performed to test the capacity of the simulator in replicating changes in detailed traffic and safety related measurements. Different techniques are adopted in each phase of the global SA and calibration method, attending to the problem complexity, the dimensionality of the experiment, and minimizing the necessary number of model evaluations. The proposed method successfully identified the role played by all parameters and by the model stochasticity on different safety outputs. The final model calibration, carried out by explicitly considering the presence of uncertainty at different levels, confirmed the potential of advanced microscopic traffic models to adequately replicate detailed traffic and safety measurements, shedding light on different aspects of the interaction between road safety and traffic dynamics.
Year: 2015
Number Pages:
395-412.
Author(s): Lima Azevedo, C.; Ciuffo, B.; Cardoso, J. L.; Ben-Akiva, M.
: Transportation Research Part C: Emerging Technologies
Editor: Elsevier
Volume:
58.
Keywords: Calibration; Uncertainty management; Traffic simulation; Road Safety
|
Comunicação
Info
Conceção de redes rodoviárias em zonas de 30 km/h
A conceção tradicional do ambiente rodoviário em zonas urbanas tem dado primazia ao espaço destinado ao tráfego automóvel, disponibilizando pouco espaço para os restantes utentes. A alteração do paradigma da mobilidade que vivemos atualmente tem invertido esta tendência, com uma crescente prioritização de espaço para os utentes vulneráveis. A conceção deste espaço deve no entanto ser efetuada de forma a garantir a segurança, a atratividade e a funcionalidade do espaço urbano, permitindo a fruição confortável desse espaço por todos os utentes. Neste contexto, as Zonas 30 podem ser vistas como soluções eficazes para alcançar esses objectivos. Neste resumo é apresentado o trabalho desenvolvido no âmbito de uma dissertação de mestrado sobre a conceção de redes rodoviárias em zonas de 30 km/h, no qual são apresentadas recomendações de soluções geométricas para estas áreas que assentam no conceito de estrada autoexplicativa e nos princípios do Sistema Seguro.
Year: 2021
Author(s): Ferreira, J.; Vieira Gomes, S.; Fontul, S.
Editor: ISEP
Keywords: Sistema Seguro; Arruamentos Urbanos; Segurança Rodoviária; Zona 30
Info
Identifying barriers to the potential implementation of road safety good practices in Africa
Africa is the worst performing Continent in road safety and year after year the situation worsens. To reverse this trend, it is essential to bear in mind that road safety problems in Africa should be preferably considered in their own context, as well as the proposed solutions to address them. Towards this direction, the objective of this paper is to present the development of the SaferAfrica Transferability Audit within the EU funded SaferAfrica project, and its pilot application to identify the barriers to the potential implementation of good road safety practices in five selected African Countries (Tunisia, Kenya, Cameroon, Burkina Faso, and South Africa). The proposed tool allows assessing whether the implementation of a given road safety intervention may face problems within one (or more) of the three domains of the Road Safety Space: Society/Culture, Economy, and Institutions. A total of 14 responses were obtained from stakeholders of the five countries. The stakeholders surveyed have different backgrounds: public employees, academics and non-governmental organizations participants. Cameroon had the largest participation, with a total of eight responses; two responses were received from Burkina Faso and Tunisia, each; and only one response was received from Kenya and South Africa. With a total of five responses, the Safer Road Users pillar of the African Road Safety Action Plan was the one with the highest participation. Economy issues are the most challenging for transferability of road safety interventions in Kenya, South Africa and Tunisia, while in Burkina Faso and Cameroon it is Society/Culture.
Year: 2020
Number Pages:
16.
Author(s): Gonzalez-Hernandez, B.; Meta, E.; Persia, L.; Usami , D.; Cardoso, J. L.
Editor: Transportation Research Board
Keywords: Safety and Human Factors; Policy
Info
A comparative analysis of transport policies and planning towards sustainable mobility
The research presented in this article reflects on the transport policy and planning processes in France and Portugal. The transport policy and planning processes in France began in 1982 with the publication of the law of orientation for inland transports (LOTI). France with more than thirty years of experience on developing Plans de déplacements urbains (PDUs) - an integrated planning tool equivalent to Sustainable urban mobility plans (SUMPS), has these plans as mandatory for agglomerations of more than 100,000 inhabitants by its national law issued in 1996 and that was made effective in 2000. The French experience of transforming the PDUs in Plans de mobilité urbaine soutenable (PMUS) is then analysed. It has led to the development of SUMPS at the European level with the publication of the EC recommendations and its 2013 former publication revised in 2014 SUMP. However, SUMPS are still non-existing planning tools in several Member States. Considering the cross-fertilisation of planning experiences between France and Portugal, the transport policy and planning processes in Portugal are analysed. Portugal has recent mobility planning experiences that had been trigged somehow by the requirements set by the external funding mechanisms and the willingness of policy makers to move together for reaching common societal goals such decarbonisation. This is the case of the living lab experience of the Intermunicipal Community of the Algarve (AMAL), a Regional Transport Authority, responsible for the development of the designated Action Plan for Sustainable Urban Mobility (Regional PAMUS) that had the scientific support of the LNEC on its methodological aspects. The development of the regional PAMUS included several interconnected components that represented innovative features in the context: an integrated approach for the development of the plans, that included a collaborative platform of all the sixteen cities in the region and more than fifty stakeholders; a formal agreement signed by all the City Mayors to work together towards sustainable mobility goals; a common vision (to reach carbon neutrality in the long-run); a communication strategy to the public; the acquisition of cycling data using the STRAVA interface; and, the development of a technological component to facilitate the interaction with citizens (app VAMUS). The research considers the above mentioned cross-fertilization of experiences for conducting a SWOT analysis such that the remaining challenges for future mobility and accessibility in the member states analysed can be outlined.
Year: 2019
Number Pages:
19p.
Author(s): Heddebaut, O.; Arsénio, E.
Editor: Elsevier
Keywords: Transport economics; Carbon-neutral mobility; Collaborative planning; Sustainable urban mobility plans; Transport policy; Transport planning
Info
A hybrid approach for prioritising road safety interventions in urban areas
Spatial organization in cities has often given a special attention to the requirements of motorized vehicles, neglecting pedestrians and cyclists needs. In order to privilege these road users, there is a need to consider their vulnerability and ensure they are provided with comfortable safety levels. Pedestrian safety can be improved with the knowledge of the underlying factors involved in crash occurrence and resulting injuries. The consideration of variables related to the built environment in explanation of crashes and injury outcomes is frequent and helpful. The city of Lisbon was the target for the development of models for the prediction of crash frequencies and their severity, wich could be used to identify high crash risk sites. This procedure contributed to support the intervention in road safety, concerning decisions about the choice of locations for intervention, the characterization of their safety problems, the selection of proper corrective interventions to implement as well as the assessment of the effects obtained with those interventions.
Year: 2019
Author(s): Vieira Gomes, S.; Roque, C.; Cardoso, J. L.
Editor: University of Brescia
Keywords: Injury Prediction Models; Crash prediction models; Pedestrian safety; Urban Areas; Road safety
Info
Análise da gravidade dos atropelamentos em Lisboa
A segurança dos peões pode ser melhorada através do conhecimento dos fatores influentes na ocorrência de acidentes e vítimas. Neste domínio é comum a consideração de variáveis relacionadas com o ambiente rodoviário para explicar o fenómeno e a gravidade das suas consequências. Nesta comunicação apresenta-se um estudo que visou aumentar o conhecimento nesta matéria, através da análise da influência de vários fatores nos níveis de gravidade das lesões por atropelamento, como sejam características selecionadas da infraestrutura, usos do solo, população e outros fatores de exposição. Foi utilizada para este fim uma base de dados georreferenciada de acidentes rodoviários e vítimas ocorridos em Lisboa entre 2008 e 2011.
Year: 2019
Author(s): Vieira Gomes, S.; Roque, C.; Cardoso, J. L.
Editor: CRP
Keywords: SIG; Modelo de regressão multinomial logística; Ambiente construído; Gravidade das lesões; Segurança pedonal
Info
Aplicação de modelos de duração à segurança rodoviária: o caso particular dos despistes.
A análise de dados de sinistralidade rodoviária tem sido usada para orientar políticas conducentes à melhoria da segurança rodoviária, bem como para melhorar a conceção e o dimensionamento de estradas e veículos. As metodologias estatísticas atualmente aplicadas à informação registada sobre sinistralidade permitem o desenvolvimento de modelos de estimativa de frequência dos acidentes e modelos explicativos da gravidade dos mesmos, capazes de serem usados para determinar com rigor a influência de múltiplos fatores na frequência e gravidade das lesões resultantes dos acidentes rodoviários. Outrossim, é possível aprofundar o conhecimento existente sobre os fatores acima mencionados, recorrendo a outras abordagens metodológicas. Neste contexto, é possível estudar o tempo decorrido (ou a distância percorrida) até à ocorrência de um evento ou a duração do mesmo. Dados como estes, são referidos na literatura como dados de duração, e podem ser analisados através de modelos de duração baseados em risco (Hazard-based duration models), os quais têm sido amplamente utilizados em campos como a medicina, as ciências sociais e a engenharia industrial. Contudo, são escassos os estudos que aplicaram modelos de duração à segurança rodoviária. Através do desenvolvimento destes modelos, o estudo reportado na presente comunicação permitiu identificar o efeito de diversos fatores na distância percorrida por um veículo descontrolado após sair da faixa de rodagem e embater num obstáculo perigoso presente na área adjacente à faixa de rodagem. Este estudo demonstra que os modelos de duração são adequados à investigação das distâncias percorridas por veículos descontrolados em despistes. Os resultados obtidos podem contribuir para a melhoria das características da área adjacente à faixa de rodagem e para a implementação de medidas mais eficientes para mitigar a gravidade dos despistes.
Year: 2019
Author(s): Roque, C. A.; Jalayer, M.
Editor: Centro Rodoviário Português
Keywords: Área adjacente à faixa de rodagem; Modelo Cox; Despiste; Modelo de duração
Info
Avaliação do impacte potencial do programa U-bike nos padrões de mobilidade da comunidade do Instituto Superior Técnico
O governo português lançou o programa nacional U-Bike que visa incentivar os alunos, professores e funcionários das universidades a optarem pela bicicleta nas suas deslocações regulares, através de um programa de aluguer de longa duração de bicicletas convencionais ou assistidas eletricamente. O objetivo deste artigo é analisar o potencial de adesão ao programa U-Bike e mudança de comportamento na mobilidade, baseado num inquérito on-line realizado à comunidade do campus da Alameda do Instituto Superior Técnico (IST), com 1406 respostas válidas. Os resultados sugerem que uma parte importante desta comunidade poderia aderir ao U-Bike, nomeadamente se as bicicletas fossem elétricas.
Year: 2019
Author(s): Moura, F.; Félix, R.; Roque, C. A.
Editor: Centro Rodoviário Português
Keywords: Instituto Superior Técnico (IST); Modelos Hierárquicos de Escolha Discreta; Mudança comportamental; Aluguer de longa duração; Sistemas partilhados de bicicletas
Info
Gravidade das consequências associadas à colisão com barreiras de segurança. Aspetos relevantes para as respetivas normas de desempenho
Os sistemas de retenção de veículos são utilizados para proteger os ocupantes dos veículos desgovernados do embate em obstáculos perigosos ou noutros veículos que circulem na faixa de rodagem de sentido contrária. A norma EN 1317 resulta da investigação realizada na Europa ao longo de vários anos e que permitiu desenvolver uma forma padronizada de caracterizar, ensaiar e avaliar o desempenho destes sistemas. A norma EN 1317 permite a comparação entre sistemas ensaiados sob as mesmas condições e permite obter um referencial para determinar e distinguir o âmbito de aplicação de cada sistema de retenção. Contudo, o desempenho de uma barreira em caso de choque depende de um conjunto de parâmetros contextuais, nomeadamente o local da respetiva instalação, as condições do solo e considerações ambientais, sendo igualmente importante considerar o ciclo de vida da barreira. Por outro lado, a gravidade dos ferimentos produzidos num acidente depende, fundamentalmente, dos limites de tolerância do ser humano relativamente a forças, desacelerações e tempos da correspondente atuação, bem como da eficácia dos dispositivos de absorção de energia cinética disponibilizados aos utentes rodoviários em caso de colisão. Os critérios de avaliação da gravidade das consequências são um meio de estimação do potencial de lesão para um ser humano ocupante de um veículo envolvido num acidente rodoviário. No caso das barreiras de segurança, o nível de gravidade do embate está associado exclusivamente ao risco de lesão para os ocupantes do veículo, o qual é estimado a partir de critérios de avaliação baseados no veículo. Neste âmbito, a análise reportada na presente comunicação permitiu constatar a ausência de estudos capazes de relacionar diretamente as consequências dos acidentes com os aspetos utilizados na norma EN 1317 para avaliação de desempenho dos sistemas de retenção de veículos, no que diz respeito aos níveis de gravidade nela definidos, bem como a ausência de referências na referida norma à gravidade esperada das lesões associadas a cada um destes níveis. Justifica-se assim a adoção de novos indicadores biomecânicos que representem mais fielmente o grau de segurança passiva disponibilizado pelos sistemas de retenção de veículos existentes.
Year: 2019
Author(s): Roque, C. A.; Cardoso, J. L.
Editor: Centro Rodoviário Português
Keywords: Nível de gravidade; EN 1317; Sistemas de retenção de veículos
Info
Investigação em segurança rodoviária em Portugal: a utilização de bases de dados hospitalares e sua ligação a outras bases
Da evolução crescente das tecnologias de informação, com a recolha de dados de forma sistemática e ininterrupta ao longo do tempo, associada aos avanços mais recentes nas metodologias estatísticas aplicadas à informação registada sobre sinistralidade, resulta a necessidade da junção de bases de dados de origens diversas. No presente estudo foram recolhidos dados de várias fontes. Por um lado, o conhecimento das características das vítimas foi possível através da base de dados disponibilizada pela Autoridade Nacional de Segurança Rodoviária (ANSR), a qual inclui um conjunto de parâmetros contextuais relativos às características das infraestruturas rodoviárias. A esta informação acresce a que diz respeito ao eventual transporte das vítimas para os hospitais, fornecida pelo Instituto Nacional de Emergência Médica (INEM). Tais dados são recolhidos nos casos de acidentes de maior gravidade, onde uma viatura de emergência médica é enviada ao local e as vítimas são transportadas para o hospital de referência. Este transporte é fornecido pelo INEM e os dados recolhidos para uma base de dados específica. Adicionalmente, foi utilizada a base de dados de morbilidade hospitalar da Administração Central do Sistema de Saúde. Esta base de dados, diz respeito ao período após a chegada das vítimas ao hospital, onde estas são avaliadas pela equipa clínica presente no serviço de urgência e em que, durante ou após o seu internamento, são classificadas perante um sistema de classificação pertencente à referida base de dados consoante o trauma apresentado. Serve o presente artigo para mostrar os principais desafios da junção de várias bases de dados de entidades tão distintas no seu âmbito de atuação e cujo resultado gerou a cooperação intersectorial entre a Escola Nacional de Saúde Pública (ENSP) da Universidade Nova de Lisboa, o Laboratório Nacional de Engenharia Civil (LNEC) e o INEM. No âmbito do presente artigo destaca-se a complementaridade dos dados disponíveis e dos conhecimentos existentes, na descodificação dos modelos biomecânicos, das lesões e das infraestruturas, mecanismo chave para o eficaz desenrolar da investigação e para a obtenção de resultados que cada entidade, trabalhando de forma independente, nunca conseguiria obter.
Year: 2019
Author(s): Santiago, R.; Roque, C. A.; Lavinha, P.; Nunes, C.
Editor: Centro Rodoviário Português
Keywords: Cooperação intersectorial; Segurança Rodoviária; Base de dados
Info
Mobilidade sustentável. A vertente do sistema seguro como elemento a integrar para abordagem holística dos problemas dos utentes vulneráveis
A mobilidade sustentável pode ser definida como a capacidade para atender às necessidades da sociedade (de livre movimentação, acessibilidade, comunicação, realização de trocas comerciais e de estabelecimento de relações) sem sacrificar outros valores humanos ou ecológicos essenciais, no presente e no futuro. A presente comunicação versa sobre a abordagem da segurança dos utentes rodoviários desprotegidos, particularmente nos aglomerados urbanos, dando-se ênfase à necessária introdução de novos indicadores de sinistralidade (conceito de acidente em viagem), à melhoria da supervisão da respetiva evolução e à configuração do espaço público na ótica do sistema seguro, imprescindíveis para atingir os objetivos do PENSE 2020.
Year: 2019
Author(s): Cardoso, J. L.; Vieira Gomes, S.
Editor: Centro Rodoviário Português
Keywords: Políticas de segurança de transportes; Indicadores socioeconómicos; Saúde pública; Segurança rodoviária
|
Books
Info
The effect of low cost engineering measures and enforcement on driver behaviour and safety on single carriageway interurban trunk roads. In Advances in Human Aspects of Road and Rail Transportation.
The application of low-cost road and traffic engineering measures (LCEM) is a cost-effective method for reducing accidents and their consequences. Empirical evidence shows that enforcement contributes to improvements on driving behaviour and road safety; however, results from reducing enforcement are seldom presented. In this paper a presentation is made of the impact LCEM and changes in enforcement intensity had on selected driving behaviour variables and safety levels on a 170 km single carriageway trunk road. LCEM were implemented on the road, followed a year later by the commitment of exceptionally intense and severe law enforcement and, after two years, its relaxation. The impacts of these safety interventions were evaluated through observational before-after studies. The expected number of injury accidents was reduced by 41% (less 75% fatalities), when considering the combined effect of LCEM and enforcement; suppression of strict enforcement was related to a 20% increase in the number of fatalities.
Year: 2012
Number Pages:
10.
Author(s): Cardoso, J. L.
Editor: CRC Press Taylor & Francis Group
Keywords: Driving behaviour; Low cost measures; Safety effects
Info
Application of a gap-graded asphalt rubber wearing course in the rehabilitation of the pavement of a stretch of the national road EN1 located in the north of Portugal - Field and laboratory case study
This case study refers to a successful application of an asphalt rubber wearing course in the frame of the rehabilitation of the pavement of the National Road EN 1 between Landiosa and Picoto. It concerns asphalt rubber manufactured by the wet process, using gap-graded aggregates. / O presente caso de estudo refere-se à aplicação bem sucedida de misturas com betume modificado com borracha reciclada de pneus em camada de desgaste, no âmbito das obras de reabilitação do pavimento da estrada nacional EN 1, entre Landiosa e Picoto. Diz respeito, em particular, ao fabrico, por via húmida, de mistura betuminosa com borracha utilizando agregados com granulometria descontínua.
Year: 2010
Number Pages:
20pp.
Author(s): Batista, F. A.; Antunes, M. L.
Editor: LNEC
Volume:
NS 124 Não Seriados.
Keywords: Laboratory test; In situ test; National road; Rubber; Recycled materials; Road pavement rehabilitation; Asphaltic road pavement; Asphalt; Pt
Info
Modos Suaves, Manual de Boas Práticas para uma Mobilidade Sustentável
Manual de boas práticas para uma mobilidade sustentável, no âmbito do projecto nacional "Mobilidade Sustentável" coordenado pela Agência portuguesa do Ambiente (Vol. II). O projecto Mobilidade Sustentável envolveu uma rede de 15 centros de investigação/universidades do país, incluindo o LNEC.
Year: 2010
Number Pages:
274p..
Author(s): Arsénio, E.; Viegas, F.
Editor: Agência Portuguesa do Ambiente (APA)
Volume:
Vol. II.
Keywords: Boas práticas; Portugal; Municípios; Planos de mobilidade; Mobilidade sustentável
Info
Projecto Mobilidade Sustentável. Concepção, Principais Conclusões e Recomendações
Nesta publicação apresentam-se os aspectos relativos à concepção do projecto Mobilidade Sustentável, principais conclusões e recomendações.
Year: 2010
Number Pages:
80p..
Author(s): Arsénio, E.; Viegas, F.
Editor: Agência Portuguesa do Ambiente (APA)
Volume:
Volume I.
Keywords: Planeamento de transportes; Mobilidade sustentável
|
Capítulo de Livro
Info
Modelos de Duração Aplicados à Engenharia de Transportes
O tempo decorrido (ou a distância percorrida) até à ocorrência de um evento, ou a duração do mesmo, podem ser analisados através de modelos de duração baseados em risco (hazard-based duration models), os quais têm sido amplamente utilizados em campos como a medicina, as ciências sociais e a engenharia industrial. Contudo, são relativamente escassos os estudos que aplicaram modelos de duração à engenharia de transportes. Este capítulo inclui dois exemplos de aplicação de modelos de duração à investigação em engenharia de transportes. O primeiro diz respeito às distâncias percorridas por veículos descontrolados em despistes ocorridos na Carolina do Norte (E.U.A.). O segundo refere-se ao tempo decorrido até à transferência modal nas deslocações para a escola de um conjunto de alunos de 162 turmas de 51 escolas do ensino básico em Portugal.
Year: 2021
Number Pages:
109-124.
Author(s): Roque, C. A.
: Modelação Matemática em Engenharia de Transportes. A Experiência do Departamento de Transportes do LNEC
Keywords: Modelo de duração; Engenharia de transportes
Info
Modelos de estimativa de frequência de acidentes rodoviários
Em Portugal, a investigação sobre o conhecimento dos fatores que afetam a probabilidade de ocorrência de acidentes tem-se centrado essencialmente nas estradas interurbanas. No entanto, as zonas urbanas, onde ocorrem elevadas percentagens de acidentes corporais requerem uma atenção prioritária. Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária em meio urbano, através da criação de ferramentas que podem ser utilizadas em métodos de intervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nas fases de planeamento e gestão das redes viárias. Uma das referidas ferramentas resultou da elaboração de modelos de estimativa de frequência de acidentes para redes urbanas, segundo diversas desagregações, em função de características do elemento rodoviário: em intersecções (três ramos, quatro ramos e rotundas) e em segmentos; segundo o tipo de acidente (atropelamentos e restantes acidentes com vítimas); e segundo a inclusão de variáveis explicativas relacionadas com o ambiente rodoviário: simplificados (apenas com as variáveis de exposição) e globais (com todas as potenciais variáveis explicativas). O desenvolvimento destes modelos foi apoiado numa base de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, com a qual foi possível explorar os dados de sinistralidade na área geográfica em análise. Estas ferramentas podem ser usadas diretamente na gestão das infraestruturas rodoviárias da cidade de Lisboa e, após pequenas adaptações, estendidas a outros municípios, dotando as respetivas entidades competentes em matéria de segurança rodoviária com informação rigorosa e detalhada sobre os fatores intervenientes na ocorrência de acidentes em meio urbano e a respetiva distribuição espacial.
Year: 2021
Number Pages:
71-96pp.
Author(s): Vieira Gomes, S.; Cardoso, J. L.
: Modelação Matemática em Engenharia de Transportes
Editor: LNEC
Keywords: Método empírico de Bayes; Acidentes rodoviários; Modelação linear generalizada; Zonas de acumulação de acidentes; Modelos de estimativa de frequência de acidentes
Info
Modelos Explicativos da Gravidade dos Acidentes Rodoviários
Os dados discretos ou em escala nominal desempenham um papel fundamental nos transportes porque muitas análises de políticas lidam com estes tipos de dados. Exemplos de dados discretos nos transportes incluem o modo de transporte (automóvel, autocarro, comboio), o tipo ou categoria de veículo e o tipo de acidente rodoviário (despistes, colisões frontais, colisões traseiras, etc.). O conhecimento do efeito das diferentes intervenções de segurança rodoviária na redução da gravidade das lesões resultantes de acidentes rodoviários exige uma avaliação empírica detalhada das interações, reconhecidamente complexas, entre veículos, estrada e fatores humanos. Os avanços mais recentes nas metodologias estatísticas aplicadas a dados discretos sobre sinistralidade rodoviária permitiram o desenvolvimento de modelos sofisticados capazes de serem usados para determinar com rigor a influência dos fatores acima referidos nos níveis de gravidade das lesões resultantes dos acidentes rodoviários. Neste contexto, a aplicação de modelos de resultado discreto permite identificar um conjunto de fatores, relacionados com a envolvente rodoviária, que são estatisticamente relacionáveis com a gravidade das lesões dos utentes envolvidos em acidentes rodoviários, permitindo aperfeiçoar a conceção e o dimensionamento das estradas, bem como orientar políticas conducentes à melhoria da segurança rodoviária. Este capítulo inclui um exemplo de aplicação do modelo logit multinomial usando a gravidade das lesões no condutor como variável de resposta.
Year: 2021
Number Pages:
97-108.
Author(s): Roque, C. A.; Cardoso, J.
: Modelação Matemática em Engenharia de Transportes. A Experiência do Departamento de Transportes do LNEC.
Keywords: Acidente rodoviário; Modelo de resultado discreto; Modelo logit multinomial
Info
A hybrid approach for prioritising road safety interventions in urban areas
Spatial organization in cities has often given a special attention to the requirements of motorized vehicles, neglecting pedestrians and cyclists needs. In order to privilege these road users, there is a need to consider their vulnerability and ensure they are provided with comfortable safety levels. Pedestrian safety can be improved with the knowledge of the underlying factors involved in crash occurrence and resulting injuries. The consideration of variables related to the built environment in explanation of crashes and injury outcomes is frequent and helpful. The city of Lisbon was the target for the development of models for the prediction of crash frequencies and their severity, wich could be used to identify high crash risk sites. This procedure contributed to support the intervention in road safety, concerning decisions about the choice of locations for intervention, the characterization of their safety problems, the selection of proper corrective interventions to implement as well as the assessment of the effects obtained with those interventions.
Year: 2020
Number Pages:
204-208pp.
Author(s): Vieira Gomes, S.; Roque, C. A.; Cardoso, J. L.
: Proceedings of the XXIV International Conference on Living and Walking in Cities.
Editor: CRC Press, Taylor & Francis Group
Keywords: High crash risk sites; Empirical Bayes method; GIS; Accident prediction models
Info
The role of sustainable urban mobility plans and ICT to improve public space for social inclusion
The importance of sustainable urban mobility plans is widely recognized by local and regional authorities across Europe. Technological innovation opportunities such as those offered by current and future ICT can contribute for cities to advance towards sustainable mobility and accessibility for inclusive public spaces. This article is built on an innovative living lab experience of the Intermunicipal Community of the Algarve (AMAL), the regional transport authority, scientifically supported by the LNEC, in Portugal, that comprised the development of the designated Actions Plans for Sustainable Urban Mobility (PAMUS) for a network of sixteen cities. Following the Regional Operational Program 2014-2020, these plans were to support the transition for a low carbon economy in all sectors, including mobility and transport. Inspired by best practices in Europe, the development of the regional PAMUS included several interconnected components: an integrated approach for the development of the plans that included a collaborative platform of stakeholders, a formal commitment signed by all Mayors to work together towards sustainable mobility goals, a communication strategy to the public, the development of a technological component (app VAMUS) and the acquisition of real-time cycling data using the STRAVA interface. This article is focusing on the potential benefits related to using the technological component of the PAMUS - the app VAMUS which means we go together (towards sustainable mobility goals). The app is currently available for two major mobile platforms (iOS and Android) and it provides information on the available public transport options and their connectivity along with other indicators as an incentive for users to choose more sustainable travel options. The PAMUS effort emerges as a disruptive approach to trigger behavioral changes for more cycling and walking (instead of car), leading to enhancing public space and quality of life objectives such as social inclusion and low carbon mobility.
Year: 2018
Number Pages:
109-122pp.
Author(s): Arsénio, E.; Coelho, J.
: Neighbourhood & City - Between digital and analogue perspectives
Editor: UL/COST
Keywords: Transport decarbonisation; Low carbon mobility; Accessibility; Transport planning and policies; Public spaces; App; Information and communications technology; Sustainable mobility
|
Tese de Doutoramento
Info
Avaliação da Influência da Infra?estrutura na Segurança Rodoviária em Meio Urbano
O conhecimento dos factores que afectam a probabilidade de ocorrência de um acidente é uma área de investigação relevante de há muitas décadas devido aos enormes custos para a sociedade dos acidentes rodoviários. Em Portugal, os desenvolvimentos nesta matéria centraram-se essencialmente nas estradas inter-urbanas. No entanto, as zonas urbanas, caracterizadas por elevadas percentagens de acidentes corporais (cerca de 69% do total entre 2004 e 2008), requerem uma atenção prioritária. Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária em meio urbano, através da criação de ferramentas que podem ser utilizadas em métodos de intervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nas fases de planeamento e gestão das redes viárias. A primeira ferramenta correspondeu à criação de uma base de dados georreferenciada dos acidentes rodoviários ocorridos na cidade de Lisboa entre 2004 e 2007, que permitiu a definição de mapas digitais, com possibilidade de uma grande diversidade de consultas e de cruzamentos de informação. A segunda ferramenta refere-se à elaboração de modelos de estimativa de frequência de acidentes para redes urbanas, segundo diversas desagregações: segundo o elemento rodoviário: em intersecções (intersecção de três ramos, intersecção de quatro ramos e rotundas) e em segmentos; segundo o tipo de acidente: atropelamentos e restantes acidentes com vítimas; e segundo a inclusão de variáveis explicativas relacionadas com o ambiente rodoviário: simplificado (apenas com as variáveis de exposição) e global (com todas as potenciais variáveis explicativas). Foi considerada a incorporação de dados de exposição relativos aos utentes vulneráveis por forma a melhorar a capacidade de estimativa da sinistralidade em redes urbanas. Estas duas ferramentas podem ser usadas directamente na gestão de infra-estruturas, dotando as entidades com competência em matéria de segurança rodoviária com informação rigorosa e detalhada sobre os factores intervenientes na ocorrência de acidentes em meio urbano e respectiva distribuição espacial.
Year: 2010
Number Pages:
371.
Author(s): Vieira Gomes, S.
Keywords: Sistemas de informação geográficos; Modelos matemáticos; Zona urbana; Segurança rodoviária
Info
Estudo das Relações entre as Características da Estrada, a Velocidade e os Acidentes Rodoviários. Aplicação a Estradas de Duas Vias e Dois Sentidos.
No período de 1988 a 1993, ocorreram anualmente nas estradas rurais de uma faixa de rodagem e dois sentidos da Rede Rodoviária Nacional de Portugal, em média, cerca de 1471 acidentes corporais anuais em curva fora de cruzamentos. Estes acidentes constituem cerca de 33% dos acidentes corporais fora de cruzamentos participados na referida rede. O objectivo do presente trabalho é contribuir para o conhecimento da influência da estrada na ocorrência de acidentes e para o desenvolvimento de um método para avaliação de traçados rodoviários do ponto de vista da segurança. Foram realizadas in situ campanhas de recolha de dados sobre as distribuições de velocidades dos condutores, os quais foram relacionados com as características geométricas das estradas e com a respectiva sinistralidade. Foram desenvolvidos modelos para estimativa de perfis de velocidade de circulação livre, bem como modelos para estimativa da frequência de acidentes, em estradas de uma faixa de rodagem e dois sentidos, adaptados às condições de tráfego nacionais. Os referidos modelos foram integrados num procedimento para detectar inconsistências de velocidade em especial associadas à ocorrência de acidentes em curva, o qual foi usado para fundamentar uma proposta de quantificação de critérios de homogeneidade de traçado, adaptados à realidade do sistema de tráfego rodoviário português.
Year: 1996
Author(s): Cardoso, J. L.
Keywords: estrada de 2 vias e 2 sentidos; Modelos de frequência de acidentes; Homogeneidade de traçado; Velocidade; Acidente rodoviário; Características da estrada
|
Dissertação de Mestrado
Info
Métodos de estimativa de volumes anuais de tráfego rodoviário
As características de utilização do automóvel no que diz respeito à flexibilidade nas distâncias praticáveis, ao conforto e à independência horária tornaram-no no meio de transporte mais utilizado no contexto actual da procura de transportes. A quantificação do uso do automóvel de forma regular e diversificada tornou-se numa necessidade manifesta da nossa sociedade, face aos impactes negativos associados ao tráfego rodoviário, tais como o congestionamento, a poluição ou a sinistralidade. O número de veículos que circulam numa rede rodoviária, ou parte dela, representado pelo volume de tráfego rodoviário, constitui uma fonte de informação fundamental sobre o estado de um determinado sistema de tráfego e na análise dos respectivos impactes. No presente trabalho é analisado o cenário actual em que se enquadram as estimações de volumes anuais de tráfego rodoviário ao nível nacional, lançando as bases para o desenvolvimento de um modelo sistemático de estimação para Portugal. São analisados os diferentes métodos internacionais de estimação de volumes de tráfego rodoviário, referindo as particularidades no seu desenvolvimento e na sua utilização. É feita uma análise dos dados relevantes actualmente disponíveis em Portugal e apresentado o desenvolvimento de um método de estimação de volumes anuais de tráfego rodoviário ao nível nacional, baseado fundamentalmente nas leituras de conta-quilómetros realizadas em inspecções técnicas. Por fim, são apresentadas as estimativas dos volumes de tráfego rodoviário ao nível nacional para os anos de 2004, 2005 e 2006, segundo o método de estimação desenvolvido. Estes valores constituem a primeira estimativa nacional de volumes de tráfego desagregados por tipo de veículo e tipo de estrada, permitindo um melhor conhecimento das distâncias percorridas segundo estas variáveis e uma actualização das estimativas agregadas existentes.
Year: 2008
Author(s): Lima Azevedo, C.
Keywords: Distâncias percorridas; Veículos x quilómetro; Vmt (vkt); Modelo de estimação; Volume de tráfego rodoviário nacional; Volume de circulação
Info
Medidas correctivas da infra-estrutura para melhoria da segurança rodoviária
Nesta dissertação de Mestrado aborda-se o tema das medidas correctivas da infra-estrutura e descrevem-se os principais aspectos a considerar num sistema de recolha e organização de informação relevante para avaliação dos resultados obtidos com as medidas aplicadas. Designam-se por medidas correctivas da infra-estrutura as intervenções que se destinam a corrigir as deficiências da infra-estrutura rodoviária que contribuem para a ocorrência de acidentes rodoviários ou a gravidade das suas consequências, para melhoria do nível de segurança do sistema de tráfego. Neste documento são apresentadas as conclusões da análise da aplicação de medidas correctivas da infra-estrutura em diversos países, bem como informação básica sobre as medidas mais comuns, designadamente no que se refere a critérios de selecção, a aspectos gerais de dimensionamento, a resultados obtidos e a custos de construção, contemplando-se, também, as vantagens e desvantagens registadas com a respectiva aplicação. São abordados aspectos relacionados com o necessário acompanhamento da aplicação deste tipo de medidas no nosso País, através de um plano de supervisão sistemática da respectiva eficácia. Por fim, é realizada a análise da evolução da sinistralidade da EN 6 na sequência de um conjunto de intervenções correctivas, através de um estudo antes-depois, no qual são avaliados os efeitos obtidos pela aplicação de medidas correctivas, quer ao nível do comportamento de condução quer quanto ao número de acidentes e respectiva gravidade.
Year: 2004
Number Pages:
205.
Author(s): Vieira Gomes, S.
Keywords: Ambiente rodoviário; Tratamento de zonas de acumulação de acidente; Medidas de engenharia; Risco de acidente; Medidas de engenharia de baixo custo; Segurança rodoviária
|
Relatório Científico
Info
Rapport dévaluation et propositions liées au Résultat 3 . Livrable du Contrat de jumelage DZ/20 CTTP
Resumem-se o contexto e as atividades de colaboração realizadas no âmbito do projeto de Jumelage DZ20, no âmbito do resultado 3, que visava estabelecer um sistema de recenseamento de tráfego rodoviário na rede interurbana argelina e contribuir para a melhoria do sistema de pesagem de veículos e controlo das cargas dos veículos pesados. Apresentam-se recomendações para a continuidade e sustentabilidade dos trabalhos do CTTP neste domínio.
Year: 2018
Author(s): Rème, A.; Klein, É.; Robin, V.; Cardoso, J. L.
Keywords: Sobrecarga; Rede rodoviária; Tráfego rodoviário
Info
Benchmarking de la seguridad vial en América Latina
Este informe describe y compara la gestión y el desempeño de la seguridad vial en diez países de América Latina: Argentina, Brasil, Chile, Colombia, Costa Rica, Cuba, Ecuador, México, Paraguay y Uruguay. La evaluación comparativa es una herramienta útil para equiparar países y aprender unos de otros. Las comparaciones en este estudio permiten identificar similitudes y diferencias entre países en cuanto al número de accidentes y víctimas, pero también a los factores que influyen en el riesgo de colisiones y la gravedad de sus resultados. El proyecto se llevó a cabo durante un período de dos años en estrecha cooperación con el Observatorio Iberoamericano de Seguridad Vial (OISEVI) y la participación activa de expertos de los diez países. Se basa en el análisis de una gran cantidad de datos e información sobre el contexto general del transporte para cada país, sus prácticas de gestión de la seguridad vial y las tendencias en el desempeño de la seguridad vial. Los aspectos específicos que se revisaron en detalle fueron la seguridad de los motociclistas y los peatones, el comportamiento al conducir y beber, el uso de cinturones de seguridad y sistemas de retención de niños, gestión de la velocidad y la atención posterior al accidente.
Year: 2017
Author(s): Vieira Gomes, S.; Feypell, V.; Wegman, F.
Keywords: Víctimas; Accidentes; Evaluación comparativa; América Latina; Seguridad Vial
Info
Benchmarking road safety in Latin America
What we did This report describes and benchmarks road safety management and performance in ten Latin American countries: Argentina, Brazil, Chile, Colombia, Costa Rica, Cuba, Ecuador, Mexico, Paraguay and Uruguay. Country benchmarking is a useful tool to compare countries and learn from each other. The comparisons in this study allow identifying similarities and differences between countries in the number of crashes and casualties, but also in the factors that influence the risk of crashes and the severity of their outcomes. The project was conducted over a two-year period in close co-operation with the Ibero American Road Safety Observatory (OISEVI) and active involvement of experts from the ten countries. It is based on the analysis of a large amount of data and information on the general transport context for each country, their road safety management practices, and trends in road safety performance. Specific aspects that were reviewed in detail were motorcyclist and pedestrian safety, drinking and driving behaviour, seat belt and child restraint use, speed management and post-crash care. What we found Road safety is a major issue in Latin America and substantial actions are needed to reduce the road safety toll. There is a high road mortality rate (fatalities per 100 000 population) in all ten countries compared to the European Union average, except in Cuba, where motorisation is much lower. Across the ten countries, more than 78 000 people were killed on the road in 2014. Some countries have seen a significant increase in the number of road deaths in recent years. For others, the number of road deaths has slightly increased or has more or less stabilised, despite a strong increase in motorisation. In the absence of targeted policy interventions, significant investment and strong leadership, the number of traffic fatalities will grow across Latin America over the next decade. Motorisation has been rising in all countries and significantly increasing the exposure to traffic risks. The deteriorating safety of motorcyclists is a particularly acute problem in Latin America due largely to the dramatic increase in the fleets of powered two-wheelers. In three countries, motorcyclists represent more than 40% of the total number of road deaths. Pedestrians are the largest or second largest group of road deaths in seven countries. While adequate legislations exist in all countries, speeding, drink driving and low levels of seat belt use and wearing motorcycle helmets are common issues in all ten countries. Addressing these issues, and reducing the toll of road deaths and serious injuries, will require substantial efforts.
Year: 2017
Author(s): Vieira Gomes, S.; Feypell, V.; Wegman, F.
Keywords: Data collection; Latin America; Benchmarking; Road safety
Info
Deliverable D3.2 - Report on common research challenges regarding safety and security
This report is a deliverable of USE-iT (Users, Safety, Security and Energy in Transport Infrastructure); a Horizon 2020 Coordination and Support Action (CSA) project managed by the Forum of European Highway Research Laboratories (FEHRL). The aim of USE-iT is to better understand the common challenges facing transport modes and in conjunction with stakeholders to produce a multi-modal research roadmap to develop technologies and approaches to addressing these challenges. In addition to a work package on management (WP1) and a work package on dissemination activities (WP5), USE-iT is divided into three technical Work Packages addressing important challenges facing all modes; providing better customer information (WP2); improving safety and security (WP3) and reducing carbon emissions and energy consumption (WP4). This report summarises the results of WP3.
Year: 2017
Author(s): Erdelean, I.; Rebelo, M.; Ambros, J.; Andriejauskas, T.; Bermejo, J.M.; Bodea, G.; Capitão, R.; Cardoso, J.L.; Fortes, C. J. E. M.; Vieira Gomes, S.; Ihs, A.; Neves, M. G.; Pressley, A.; Steinicke, W.
Keywords: energy consumption; carbon emissions; Security; customer information; multi-modal research; transport modes; Road safety
Info
Road safety curriculum for Africa. Deliverable 6.1
The specific aims of WP6 was to identify training needs and to develop capacity building programs on road safety in African countries. This deliverable will formulate the major issues for developing a curriculum for road safety experts in Africa. The different tasks to reach the final goal of this deliverable, are summarized in the following figure (...) On the one hand, the available knowledge and education in Europe (but also worldwide) was gathered. On the other hand, the same was done for Africa and also the different needs and training issues were analysed. Although we could not get information from each country or every existing high level educational institutes, there was enough material to make some analysis and conclusions. Not in every African country, high level education for different professionals (engineers, economics,
) includes a specific road safety module. Only at a few universities (South-Africa, Morocco, Ghana and Kenia) the curriculum for civil engineers includes a road safety module. Some institutions provide such a module as a post graduate training. A lot of African experts followed courses provided by international universities (Delft, Hasselt,
), or organized by companies working in Africa (Renault, FedEx,
). Worldwide a lot of E-learning modules are available. The deliverable gives an overview of the courses for Low and Middle Income countries (LMIC) and the different E-learning courses for professionals in English, French and Portuguese. To get a clear view on the educational needs, we developed a questionnaire (see annex 3). Unfortunately, the response was very low. Additional we made a limited literature review on the specific road safety issues in African countries. Both sources provide us with a good insight in the needs for education and training, as well as concerning the content as concerning some structural
Year: 2017
Author(s): Vieira Gomes, S.; Kluppels, L.; Schermers, G.
Keywords: Africa; Road safety; Capacity Building; Training
Info
Report on common research challenges regarding energy efficiency and carbon intensity
This report is a deliverable of USE-iT (Users, Safety, Security and Energy in Transport Infrastructure); a Horizon 2020 Coordination and Support Action (CSA) project managed by the Forum of European Highway Research Laboratories (FEHRL). The aim of USE-iT is to better understand the common challenges facing transport modes and in conjunction with stakeholders to produce a multi-modal research roadmap to develop technologies and approaches to addressing these challenges. In addition to a work package on management (WP1) and on dissemination activities (WP5), USE-iT is divided into three technical Work Packages addressing important challenges facing all modes: providing better customer information (WP2); improving safety and security (WP3) and reducing carbon emissions and energy consumption (WP4). This report relates to Work Package 4 (Deliverable D4.2) on reducing the carbon emissions and energy consumption associated with the transport sector. In the first WP4 report [D4.1], a significant number of technologies, materials and approaches were identified which could help reduce transport energy consumption and reduce carbon emissions. In the present report [D4.2], the common challenges facing all modes as they work to reduce transport carbon emissions are identified, and the potential areas of cross-modal research that could help to address these challenges are evaluated and prioritised.
Year: 2016
Author(s): Reeves, S.; Peeling, J.; Lamb, M.; Arsénio, E.; Bidnenko, N.; Saleh, P.; Carlson, A.; Chen, M.; Saleh, P.; Spicka, L.; Steinicke, W.; Zofka, E.
Keywords: Sustainable transport; Transport technology; Transport infrastructures; Transport decarbonisation; Vehicle fuel efficiency; Asset management; Greenhouse gas emissions; Climate change
Info
Benchmarking Road Safety in Latin America. Methodological Approach.
The objective of this project is to develop a methodology to assess road safety performance in a selection of Latin America countries and benchmark their performance against a set of indicators and best practices. The expected outcome is to offer policy makers in Latin America a tool to assess the weaknesses and strengths of each country and identify areas deserving policy attention and where the experience of other countries may be usefully applied. The results from this benchmarking analysis shall be useful to policy makers and researchers in understanding better road safety principles and in learning from each other in order to design effective road safety policies.
Year: 2015
Author(s): Vieira Gomes, S.
Keywords: Data collection; Latin America; Road safety; Benchmarking
Info
Deliverable D3.1 Preliminary report on safety and security based on investigation across modes and domains
This report is a deliverable of USE-iT (Users, Safety, Security and Energy in Transport Infrastructure); a Horizon 2020 Coordination and Support Action (CSA) project managed by the Forum of European Highway Research Laboratories (FEHRL). The aim of USE-iT is to better understand the common challenges facing transport modes and in conjunction with stakeholders to produce a multi-modal research roadmap to develop technologies and approaches to addressing these challenges. In addition to a work package on management (WP1) and a work package on dissemination activities (WP5), USE-iT is divided into three technical Work Packages addressing important challenges facing all modes; providing better customer information (WP2); improving safety and security (WP3) and reducing carbon emissions and energy consumption (WP4). This deliverable presents the preliminary results of WP3, in which technologies and approaches that have the potential of enhancing safety and security across all transport modes were investigated. Transport and mobility represent one of the most important elements of any economy and society. Moreover, global transport, across all modes, has a direct impact on the quality of life of people and their traveling. For this reason, not only ensuring but enhancing safe and secure transport across all modes is paramount. In WP3, a literature review was performed to identify best practice approaches that have the potential to cross over from one transport mode to another. A significant number of technologies and approaches with capabilities to improve transport safety and security were identified and categorized in areas and concepts. A detailed description of these technologies, along with barriers and opportunities for cross modal application can be found in Appendix A. The next step in the project is to discuss the technologies with key stakeholders from all modes in order to identify potential research topics that could benefit more than one mode. This will be done through: ? A stakeholder workshop to be held on 21st January 2016 in Brussels ? A questionnaire sent out to stakeholders in December 2015 The information gathered will be summarised in the next WP3 deliverable. The research topics from WP3 will be incorporated into the final USE-iT research roadmap, together with the outputs from the other WPs. This will represent an investment strategy for key infrastructure funders including European, national and regional public bodies and private infrastructure investors to be used in specific deployments.
Year: 2015
Author(s): Mocanu, I.; Saleh, P.; Machado, P.; Ambros, J.; Andriejauskas, T.; Bondar, T.; Capitão, R.; Cardoso, J.L.; El-koursi, E.; Eriksson, J.; Fortes, C. J. E. M.; Vieira Gomes, S.; Iglesias, I. J.; Pereira,
Keywords: security; safety; multi-modal research roadmap; Transport modes
Info
Preliminary report on energy efficiency and carbon intensity based on investigation across modes and domains
This report is a deliverable of USE-iT (Users, Safety, Security and Energy in Transport Infrastructure); a Horizon 2020 Coordination and Support Action (CSA) project managed by the Forum of European Highway Research Laboratories (FEHRL). The aim of USE-iT is to better understand the common challenges facing transport modes and in conjunction with stakeholders to produce a multi-modal research roadmap to develop technologies and approaches to addressing these challenges. In addition to a work package on management (WP1) and a work package on dissemination activities (WP5), USE-iT is divided into three technical Work Packages addressing important challenges facing all modes; providing better customer information (WP2); improving safety and safety (WP3) and reducing carbon emissions and energy consumption (WP4). This report relates to Work Package 4; reducing the carbon emissions and energy consumption associated with the transport sector. Transport is one of the largest contributors to global greenhouse gas emissions (GHG), and user of energy mainly fossil fuels. Following the European Commissions Transport White Paper [2], the EU transport sector needs to reduce its emissions by 60% by 2050 compared to 1990s levels, which represents a significant challenge for all modes. Over the past decade a multitude of different innovations have been developed which are designed to reduce carbon, however the difficulty for the industry is to identify which ones have the most potential to both reduce carbon and maintain/improve other vital characteristics such as safety, durability, affordability etc. In WP4 a significant number of technologies were identified which could help reduce energy and carbon.
Year: 2015
Author(s): Peeling, J.; Reeves, S.; Lamb, M.; Arsénio, E.; Bidnenko, N.; Leal, D.; Saleh, P.; Spicka, L.; Warner, H.; Zofka, E.
Keywords: Asset management; Alternative fuels; Low carbon; Transport infrastructures; Greenhouse gas emissions; Energy efficiency; Climate change; Transport technology
Info
Avaliação de cenários intermodais de transporte para o Porto de Sines: uma oportunidade para o transporte marítimo de curta distância?
O transporte marítimo representa 80% do comércio mundial, sendo que 40% do tráfego de mercadorias intraeuropeu é conseguido através de transporte marítimo de curta distância. A mercadoria contentorizada tem ganho uma importância crescente nas últimas décadas, registando um aumento de 3 para 16% nas trocas internacionais marítimas, entre 1980 e 2012. No Plano Estratégico dos Transportes 2011 2015 constam um conjunto de princípios orientadores onde o mar constitui um ativo estratégico para Portugal na medida em que, devido à localização geográfica, aqui confluem tráfegos marítimos provenientes de várias regiões do mundo. Encontram-se aí previstos vários investimentos para o setor marítimo-portuário, designadamente para o complexo de Sines. A Estratégia Nacional para o Mar 2013-2020 que assenta numa visão de crescimento azul, confere um conjunto de oportunidades para os sectores da economia do mar e apresenta, entre os seus objetivos, aumentar até 2020 em 50% a contribuição direta do setores do mar para o PIB. De acordo com o estudo mais recente da Direção Geral de Política do Mar, em 2010, a economia do mar representava cerca de 2,5% do valor acrescentado bruto e 2,3% do emprego nacional. Neste contexto, o Porto de Sines, sendo um dos poucos portos de águas profundas da Europa e um porto principal na rede transeuropeia de transportes (RTE-T), assume uma posição estratégica na fachada Atlântica para que o seu potencial seja aproveitado no segmento de carga contentorizada ao nível intercontinental. É de relevar que a rede transeuropeia de portos marítimos abarca 96% do tráfego de mercadorias e 93% do tráfego de passageiros que transitam pelos portos da UE. Relativamente ao tráfego de mercadorias intraeuropeu, o Livro Branco dos Transportes da Comissão Europeia recomenda a transferência de tráfego rodoviário de longo curso (para distâncias superiores a 300 km) para os modos ferroviário ou marítimo e fluvial, tendo em conta o objetivo da redução de gases com efeito de estufa: espera-se que até 2050 se concretize uma redução mínima de 60% das emissões de gases com efeito de estufa (gee) do setor dos transportes (com referência aos níveis de 1990), que é equivalente a uma redução de cerca de 70% com referência aos níveis de 2008 (no horizonte até 2030, a redução esperada de gee é de cerca de 20%). Face ao acima exposto, no contexto dos investimentos relativos ao transporte de mercadorias em prospetiva centrados no Porto de Sines e no corredor Sines/Setúbal/Lisboa-Caia, urge investigar quais as opções de investimento de maior custo-eficácia. O presente ensaio decorre do estudo desta problemática e constitui uma síntese de trabalho realizado no âmbito de projeto de I&DT financiado pela Fundação para a Ciência e Tecnologia e concluído em Dezembro de 2013. Dar-se-á destaque aos cenários desenvolvidos para o Porto de Sines, através de técnicas/métodos de prospetiva e planeamento de longo prazo e à avaliação dos seguintes cenários alternativos para o transporte de mercadorias (i) marítimo marítimo (Short Sea Shipping); (ii) marítimo - rodoviário; (iii) marítimo ferroviário, e (iv) marítimoferroviárioaeroportuário. A abordagem metodológica assumiu uma movimentação de carga na cadeia de abastecimento contínua (solução intermodal de transportes) e considerou a estrutura de custos médio total, integrando os custos de transporte internos das várias opções de transporte interligadas e ainda a componente ambiental de custos externos (externalidades ambientais) associada à redução esperada de gee, dada a sua importância na política de transportes europeia. A lista de pressupostos de base do estudo encontra-se descrita na ficha técnica do relatório científico de 119 páginas submetido em 31 de julho de 2014 ao concurso promovido pela APS S.A. (regulamento em http://www.divulgacao.uac.pt/uploads/uac_artigo_plugin/ficheiro/regulamento_ensaio_premio_porto_sines2014.pdf).
Year: 2014
Author(s): Arsénio, E.; Prata, J.
Keywords: Poltítica de transportes europeia; Transporte rodoviário; Transporte aéreo; Transporte ferroviário; Transporte marítimo de curta distância; Análise custo-eficácia; Emissões de co2e; Economia do mar e dos transportes; Acesssibilidades marítimo-portuárias; Transporte intermodal de mercadorias; Plano estratégico de transportes e infraestruturas; Intermodalidade/multimodalidade
|
ICT
Info
Audit de sécurité routière au projet de routes du réseau routier national Manuel dapplication
Ce document est la traduction en langue française du manuel destiné à appuyer la mise en oeuvre d'audits de sécurité routière au projet dinfrastructures routières du réseau routier national développé par le Laboratório Nacional de Engenharia Civil portugais. Le document est organisé en quatre sections. La première section présente la notion daudit de sécurité routière (ASR): un ensemble de procédures visant à intégrer, de manière explicite et formelle, les connaissances et informations sur la sécurité routière dans la planification et la conception de routes, afin datténuer les risques daccidents et de réduire leurs conséquences. Cette section présente également des informations sur la portée, le but et l'utilité des ASR dans la gestion de la sécurité routière tout au long du cycle de vie de l'infrastructure routière. Les principales compétences souhaitables pour le profil des auditeurs sont également décrites. Dans la seconde section, des recommandations sont formulées quant aux aspects techniques à prendre en compte dans la mise en oeuvre dun rapport daudit de sécurité routière, notamment en ce qui concerne linfluence de la route sur le risque daccident et aux fondements de bonnes pratiques. La troisième section est réservée aux aspects les plus directement liés aux procédures de mise en oeuvre des RSA, en particulier en ce qui concerne les rôles de chacune des parties prenantes. Enfin, dans la quatrième section, neuf listes de contrôle sont présentées, dont lutilisation est volontaires, ainsi que des exemples de résultats dASR en chacune des quatre phases du projet dinfrastructure routière. Ces listes de contrôle, figurant en annexe, concernent les aspects suivants: la phase des études préalables ; la phase des études davant-projet ; la phase des études de projet ; la phase immédiatement avant la mise en service ; les traversées dagglomération ; les intersections au contrôle par règle de priorité ou STOP; les intersections contrôlées par feux de circulation; les carrefours giratoires; et les échangeurs.
Year: 2018
Author(s): Cardoso, J. L.
Keywords: PT; La sécurité routière; Manuel; Audit; Projet routier
Info
Estado-da-arte sobre medidas de engenharia de segurança rodoviária em ambiente urbano e sobre modelos de estimativa da frequência de acidentes - Resultados do projecto IRUMS
O presente documento constitui o primeiro relatório referente à actividade desenvolvida pelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdade de Ciências e Tecnologias da Universidade de Coimbra (FCT/UC) no âmbito do projecto IRUMS Infra-estruturas Rodoviárias Urbanas Mais Seguras. Neste relatório apresenta-se o estado da prática corrente em medidas de engenharia de segurança rodoviária em ambientes urbanos e o estado da arte em modelos de estimativa da frequência de acidentes, elencando-se também variáveis potencialmente úteis para a estimação de volumes de tráfego de utentes rodoviários vulneráveis com especial incidência nos peões.
Year: 2011
Number Pages:
152pp.
Author(s): Vieira Gomes, S.; Cardoso, J. L.; Carvalheira, C.; Picado Santos, L.
Editor: LNEC
Keywords: Previsão estatística; Modelo estatístico; Acidente rodoviário; Área urbana; Segurança rodoviária
Info
Método para intervenção na infra-estrutura rodoviária urbana para melhoria da segurança - Resultados do projecto IRUMS
O presente documento constitui o quinto relatório referente à actividade desenvolvida pelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdade de Ciências e Tecnologias da Universidade de Coimbra (FCT/UC) no âmbito do projecto IRUMS Infra-estruturas Rodoviárias Urbanas Mais Seguras, que se integra também num protocolo assinado com a Câmara Municipal de Lisboa. Neste relatório final do projecto apresentam-se o resumo e as principais conclusões do trabalho desenvolvido no que diz respeito ao estado da arte sobre medidas de engenharia de segurança rodoviária em ambiente urbano e sobre modelos de estimativa da frequência de acidentes; ao desenvolvimento de modelos de estimativa de frequência de acidentes nos arruamentos da cidade de Lisboa; e ao desenvolvimento de uma metodologia capaz de identificar as fragilidades da infraestrutura rodoviária em zona urbana que contribuam para a ocorrência de acidentes e que possam ser tratadas com o objectivo da redução da sinistralidade rodoviária. É ainda sumariada a tarefa de recolha de dados, dada a sua relevância para a concretização deste projecto.
Year: 2011
Number Pages:
51pp.
Author(s): Vieira Gomes, S.; Cardoso, J. L.; Carvalheira, C.; Picado Santos, L.
Editor: LNEC
Keywords: Análise de dados; Modelo estatístico; Acidente rodoviário; Segurança rodoviária; Área urbana; Infra-estrutura rodoviária
Info
Accident prediction models for bidirectional data on portuguese motorways
The present document describes prediction models for accident, fatalities, serious injuries and killed and seriously injured victims, adjusted to bidirectional data of Portuguese motorway sections. The study was developed at Laboratório Nacional de Engenharia Civil (LNEC) in the scope of Workpackage 2 - Safety Impact Assessment and Accident Prediction Model of the RIPCORD-ISEREST project, carried out under the 6th European Framework Program. It covers the issues related to modeling accidents using the Negative Binomial model regressions as well as detailed diagnostic checks of the models obtained. The data used were collected over a five year period, ranging from 1999 to 2003. Several explanatory variables were measured concerning exposure, number of lanes, presence of an additional lane, lane widths, type and widths of the roads shoulders and medians; response variables include the number of accidents, killed and serious injuries, fatalities and serious injuries that occurred on the five year period. The data set was further divided into four subsets corresponding to all road sections whose variables with missing values were removed, road sections without missing values and the equivalent for road sections with values of the annual average daily traffic greater than 5000 vehicles. Models were fitted to the four data sets with the response variables consisting on the number of accidents, fatalities, serious injuries and killed and seriously injured victims. Statistical techniques of model selection and model checking, including deviance and likelihood ratio tests and the AIC procedure, as well as graphical methods, were intensively used as measures of goodnessof- fit.
Year: 2009
Number Pages:
153pp.
Author(s): Lopes, S.; Cardoso, J. L.
Editor: LNEC
|
|
Outro
Info
Benchmarking road safety in Latin American countries
The main objective of the project was the benchmarking of road safety performances and developments of ten Latin American countries. The comparison allowed to identify the similarities and differences between countries, not only on the number of crashes and casualties, but also on the factors, circumstances and events that influence the risk of a crash and the severity of its outcome. The analysis was performed in the following areas
Year: 2018
Author(s): Vieira Gomes, S.; Feypell, V.; Wegman, F.
Keywords: Data collection; Latin America; Benchmarking; Road safety
Info
Document organisationnel du système de comptage. Document descriptif des besoins
Neste relatório é proposta a estrutura organizacional para realização das contagens tendentes ao recenseamento de tráfego rodoviário na rede de estradas interubanas da Argélia, incluindo o dimensionamento do parque de equipamento de contagem a usar, sua configuração (cntagens permanentes e temporárias), bem como a avaliação dos prazos de realização, em função da dimensão das equipas encarregadas da colocação e exploração dos equipamentos nos trechos da rede rodoviária.
Year: 2017
Author(s): Rème, A.; Courbon, T.; Robin, V.; Cardoso, J. L.
Keywords: Rede rodoviária; Tráfego rodoviário
Info
Transport Challenge in Horizon 2020. ECTRI suggestions for the third work programme (2018-2020) in the field of "Transport economics and policy"
The European Conference of Transport Research Institutes (ECTRI) is an international non?profit association that was officially founded in April 2003. It is the first attempt to unite the forces of the foremost multimodal transport research centres across Europe and to thereby promote the excellence of European transport research. Today, it includes 28 major transport research institutes or universities from 21 European countries. Together, they account for more than 4,000 European scientific and research staff in the field of transport. ECTRI as the leading European research association for sustainable and multimodal mobility is committed to provide the scientifically based competence, knowledge and advice to move towards a green, safe, efficient, and inclusive transport for people and goods. The objective of this Position Paper in the field of transport economics and policies is to contribute to the third work programme 2018-2020 of the European Commission, for inclusion in the upcoming calls of Horizon 2020, and in particular addressing the societal challenge aiming to achieve Smart, Green and Integrated Transport".
Year: 2016
Author(s): Arsénio, E.; Heddebaut, O.; Tuominen, A.
Keywords: Connected and automated transport; Socio-economic research; Low carbon transport; Behavioural research; Transport policies; Transport economics; Integrated transport; Green transport; Smart transport; Horizon 2020
Info
Assessment of intermodal freight transport costs
The research reported in this paper is part of the R&D project COST-TRENDs, funded by the Portuguese Foundation for Science and Technology. It presents a strategic assessment study of the hinterland connections centred in the Port of Sines, in Portugal, that integrates the core network corridor of the Trans-European Transport Network (TEN-T) designated as the Atlantic corridor. The study comprised the analysis of trends of maritime freight costs until 2020 and the assessment of alternative intermodal freight transport options to reduce costs along the multimodal transport chains. The options evaluated focused in the Iberian section of the Atlantic corridor and included the combination of maritime-short sea shipping, maritime-rail, maritime-road and, also, rail-air modes. The study estimated several key performance indicators for each option which aim to provide useful inputs to transport policy.
Year: 2014
Number Pages:
16pp.
Author(s): Prata, J.; Arsénio, E.
Keywords: Freight transport costs; Co2 emissions; Climate change externalities; Intermodal freight transport
Info
How to Promote Sustainable Land-Use Changes Through Developing Intermodal High-Speed Railway Stations: a case study in Portugal
The literature shows that the development of the railway system in most European countries had a key role both in the evolution of urban systems and regional dynamics. On the other hand, it can be said that railway stations might act as important drivers for promoting sustainable land-use changes, namely of node and place functions which can be consistently balanced. The future Portuguese High-Speed Railway (HSR) network is considered as a major strategic transport scheme at both the Iberian and national levels. Its first stage comprises three routes. Of these, one links the Lisbon Metropolitan Area with the Spanish border of Badajoz, being an integral part of the HSR between both Iberian capitals, whereas the other two form the Atlantic Axis, encompassing a system of cities ranging from Lisbon to Porto, an from the latter point to Braga, Vigo and Coruña, concentrating nearly 80% of the whole Portuguese population, and serving an area generating about 90% of Portugals GDP. The Lisbon to Porto HSR line, hereafter designated as the Atlantic corridor, will be a 292 Km-long standard-gauge (1435 mm) one, supplementing an historic and congested 146-year old Iberian-gauge (1668mm) main line. The new HSR line is expected to open by 2017, and will feature a limited number of intermediate stations, enabling an easy interchange with other transport modes, namely with the broad-gauge conventional rail network. The future intermodal Leiria-AV HSR station, one of the four intermediate railway stations within the Lisbon Porto line, will be located between the neighbourhood of Leiria (circa 42785 inh. in 2004) and Marinha Grande (38599 inh. in 2008), in the industrial zone of Barosa, at around 120 km North of Lisbon Metropolitan Area (LMA). This new intermodal HSR station is expected to function as a major regional interchange, by providing access to various urban centres, with support on both the tangencial Western main railway line, the A8 North-South coastal motorway and the National Road linking Leiria and Marinha Grande. One can say that the foreseen centrality, which will be at 35 minutes travel time from LMA, will be an opportunity to integrate railway development, activity location and spatial planning both at the regional and local levels, aiming at sustainable patterns of development. The work presented in this paper is the first stage of a broader research project on the topic High Speed Railway in Portugal: impacts and intermodality within the Leiria region which covers a wide range of HSR impacts. The questions addressed in this research are as follows: o What are the potential territorial implications of the HSR network in the region of the Leiria-AV? o How to promote sustainable land use and transport changes using the new intermodal HSR station as a (local and regional) development anchor? o How to balance expected HSR impacts if the aim is to achieve both sustainable and healthier communities along with maximizing economic and other potential positive impacts? The research methodology will comprise two major steps: i) benchmarking exercise of other reference cities in Europe where HSR was already implemented, such that a list of potential impacts can be now anticipated for the case of the intermediate city of Leiria; ii) implementation of an attitudinal and stated choice survey to a representative sample of economic agents and other stakeholders that will assess individuals (local communities) and group (firms) perceptions regarding the impacts of the HSR project and specific intermodal scenarios set for promoting sustainable land use and transport mode changes; iii) the comparison of potential versus perceived impacts and preferred intermodal options. Overall research results are expected to contribute towards future policy formulation with respect to railway and land use developments both at the community and regional level aiming at achieving sustainable patterns of development. This paper is centred on the benchmarking exercise that comprised major reference cities where HSR were already implemented and on the preliminary results obtained from a stated choice (SC) survey administered to a sample of economics agents within Lisbon Metropolitan Area. This SC survey focused on the assessment of those potential territorial effects related to relocation of offices nearby the future Leiria AV HSR station. The remainder of this paper is organized as follows. Section 2 presents an overview of the HSR project in Portugal and the Leiria AV station in the context of the urban/regional network. Section 3 provides a discussion of the territorial impacts related to the HSR project considering a benchmarking exercise that included impacts observed at similar characteristics to Leiria and HSR connections. Subsequently, section 4 present a prospective analysis of those impacts for the Leiria region, including a stated-choice experiment which was implemented to a sample of firms in Lisbon to evaluate ex ante possible office relocation choices. Some prospective scenarios are then outlined. Finally, section 6 concludes and some further research directions can be drawn.
Year: 2010
Number Pages:
30p..
Author(s): Arsénio, E.; Tao, M.; Ferreira, F.
Editor: PTRC, UK
Keywords: Stated-choice survey; Discrete choice models; Territorial impacts; Intermodality; High-speed rail
|