Artigos de Revista
Info
Defining suitable Safe System projects: The experience of the SaferAfrica project in five African countries
When dealing with road safety in Africa, one should bear in mind that road safety problems need to be seen in their context as the solutions proposed to address them. While it is relevant to consider international good practices, African stakeholders should become owners of the interventions addressing their problems and take the responsibility for developing and implementing the appropriate solutions, taking advantage of suitable technical assistance, if needed. Based on these considerations, in this paper, a presentation is made of the process used in the European research project SaferAfrica to define suitable Safe System projects in Africa. This project aims at supporting policymakers and stakeholders with evidence on critical risk factors, related actions, and good practices drawn from high-quality data and knowledge. In the project, road safety and traffic management capacity reviews at the country level were carried out in five countries (Cameroon, Burkina Faso, Tunisia, Kenya, and South Africa), following the World Bank guidelines. After conducting such a capacity review, these guidelines recommend the preparation and implementation of Safe System projects, stand-alone, multisector initiatives targeting high-risk corridors and areas, with outcomes large enough to be reliably measured. In SaferAfrica, this approach aims at facilitating the implementation of Safe System projects in the considered countries, by identifying detailed short-term improvement plans and producing contextualized terms of reference for some interventions per selected country. These interventions are remedial, they address high-priority concerns and demonstrate the viability of high potential gains within current administrative and legislative frameworks. To design interventions suitable to the existing context, the transferability audit tool was adopted within a participative process, involving all possible interested parties, from the institutions to NGOs. Results from the process are presented and discussed.
Ano: 2021
Número Páginas:
14.
Autor(es): Schermers, G.; Cardoso, J. L.
Revista: IATSS Research
Editor: Elsevier Ltd.
Volume:
316.
Keywords: Políticas de transportes; Gestão de segurança; Visão zero; Sistema seguro; Segurança rodoviária
Info
Investigation of injury severities in single-vehicle crashes in North Carolina using mixed logit models
Introduction: Roadway departure (RwD) crashes, comprising run-off-road (ROR) and cross- median/centerline head-on collisions, are one of the most lethal crash types. According to the FHWA, between 2015 and 2017, an average of 52 percent of motor vehicle traffic fatalities occurred each year due to roadway departure crashes. An avoidance maneuver, inattention or fatigue, or traveling too fast with respect to weather or geometric road conditions are among the most common reasons a driver leaves the travel lane. Roadway and roadside geometric design features such as clear zones play a significant role in whether human error results in a crash.in a crash. Method: In this we used mixed-logit models to investigate the contributing factors on injury severity of single-vehicle ROR crashes. To that end, we obtained five years (20102014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administrations Highway Safety Information System Database. Results: The results indicate that factors such as driver conditions (e.g., age), environmental conditions (e.g., weather conditions), roadway geometric design features (e.g., shoulder width), and vehicle conditions significantly contributed to the severity of ROR crashes. Conclusions: Our results provide valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles. Practical applications: Our results show that increasing shoulder width and keeping fences at the road can reduce ROR crash severity significantly. Also, increasing road friction by innovative materials and raising awareness campaigns for careful driving at daylight can decrease the ROR crash severity.
Ano: 2021
Número Páginas:
161-169.
Autor(es): Roque, C. A.; Jalayer, M.; Hasan, A.S
Revista: Journal of Safety Research
Editor: Elsevier
Volume:
Volume 77.
Keywords: Crash severity model; Mixed logit model; Run-off-road; Roadway departure
Info
Asessing multimodal mobility trends using heterogeneous data sources: a case study for supporting sustainable mobility policy goals within the Algarve region
This paper is built around a research project developed with the support of the Regional Planning Authority of the Algarve Region in Portugal which assessed mobility patterns covering all modes of transport using heterogeneous data sources (time-series data). Data mining techniques helped to identify limitations in some data sets. The econometric analysis showed that integrated autoregressive models and moving averages for series with seasonality were successful in the prediction of passenger flows using time-series data gathered by the regional authority from transport operators and other entities. Results from the analysis are useful to support a strategy to reverse current trends on continued car growth (along with public transport decrease) and to devise policy measures to enable a sustainable mobility path towards decarbonisation and social equity goals until 2030.
Ano: 2019
Número Páginas:
12p.
Autor(es): Arsénio, E.; Silva, S.; Pereira, H.; Domingues, A.
Editor: Elsevier
Keywords: Big data; Decarbonisation; Multimodal mobility; Trend analysis; Passenger flow prediction models; Sustainable mobility
Info
Improving roadside design policies for safety enhancement using hazard-based duration modeling
Roadway departure (RwD) crashes, comprising run-off-road (ROR) and cross-median/centerline head-on collisions, are one of the most lethal crash types. Nationwide, from 2014 to 2016, annual RwD crashes accounted for 53% of all motor vehicle traffic fatalities. Several factors may cause a driver leave the travel lane, including an avoidance maneuver and inattention or fatigue. Roadway and roadside geometric design features (e.g., lane widths and clear zones) play a significant role in whether human error results in a crash. In this paper, we present a hazard-based duration model to investigate the distance traveled by an errant vehicle in a run-off-road crash, the stopping hazard rates, and associated risk factors. For this study, we obtained five years' (20102014) of crash data related to roadway departures (i.e., overturn and fixed-object crashes) from the Federal Highway Administration's Highway Safety Information System Database. The results indicate that over 50% of the observed vehicles traveled no more than 36 ft. in a ROR crash and 25% of the observed vehicles traveled at least 78 ft. We also found that seasonal, roadway, and crash variables, along with vehicle information and driver characteristics significantly contributed to the distances traveled by errant vehicles in ROR crashes. This paper presents methodological empirical evidence that the Cox proportional-hazards model is appropriate for investigating the distances traveled by errant vehicles in ROR crashes. In addition, it also provides valuable information for traffic design and management agencies to improve roadside design policies and implementing appropriately forgiving roadsides for errant vehicles.
Ano: 2018
Número Páginas:
165-173pp..
Autor(es): Roque, C. A.; Jalayer, M.
Revista: Accident Analysis and Prevention
Editor: Elsevier
Volume:
120.
Keywords: Forgiving roadside; Roadside design; Cox model; Run-off-road crash; Hazard-based duration model
Info
Portuguese mainland road network safety performance indicator
Stepping away from traditional crash-based road safety measurements, several safety performance indicators (SPI) have been proposed in the past few years. SPI can incorporate quantitative and qualitative information on specific aspects that are known to have influence in the safety levels and, not only measure the influence of various safety interventions but also enable comparisons between different road systems. This paper presents the results of the application of a road network SPI to the entire Portuguese road network. This SPI aims at evaluating at the network level, if the connections between urban centres within a region are made by the adequate type of roads regarding generic safety criteria. To this end, the connections to be assessed were classified into pre-defined theoretical safety classes, based on the population of the connected urban centres. Then, the observed safety class of these connections was assessed according to the characteristics of their cross-section and associated road environment of the existing connection between the two urban centres. If the observed class is ensured by a road of higher or equal class than the pre-defined theoretical level in all its extension, the link is considered to be of the appropriate class. For each connection, the results of its evaluation are expressed as a binary value: 0 when the class is not appropriate; and 1 when it is appropriate. The evaluation results are weighted by the road length and aggregated by connection class and throughout the whole road network. The results show a satisfactory network configuration with an SPI of 94% connections with class equal to or higher than the adequate for the type of connection between urban centres they established. The above insights can help in the identification of potential operational inconsistencies that may require safety-related interventions and used for international benchmarks against existing SPI evaluations.
Ano: 2018
Número Páginas:
416-422pp.
Autor(es): Vieira Gomes, S.; Cardoso, J. L.; Lima Azevedo, C.
Revista: Case Studies on Transport Policy
Editor: ELSEVIER
Volume:
Volume 6, Issue 3.
Keywords: Road network; Spatial analysis; Geographic information system; Safety performance indicator
Info
Assessing intermodal freight transport scenarios bringing the perspective of key stakeholders
This paper extends the previous R&D project on the evaluation of intermodal freight transport scenarios (seamless multimodal logistic chains) centered in the Port of Sines in Portugal where a set of alternative investment options were compared: (i) maritime maritime (short-sea-shipping); (ii) maritime-road; (iii) maritime-rail; (iv) maritime-rail-air. This paper aims to bring the perspective of key stakeholders gathered in a specific workshop and assesses the impact of their views in the evaluation of options. The impact analysis focuses on most critical operational and environmental variables, namely shipping speed and CO2 emissions.
Ano: 2017
Número Páginas:
900-915pp.
Autor(es): Prata, J.; Arsénio, E.
Revista: Transportation Research Procedia
Editor: Elsevier
Volume:
25C.
Keywords: Corporate social responsability; CO2 emissons; Shipping speed; Freight transport costs; Intermodal transport
Info
Assessing the market potential of electric bicycles and ICT for low carbon school travel: a case study in the smart city of Águeda
Electric bikes (e-bikes) may help in transport decarbonisation in European cities. To fully assess the market potential of e-bikes, further research is needed to understand users preferences and the range of factors that can contribute for people to shift from car use to low carbon vehicles such as e-bikes. This paper is built on the Be4Schools R&D project implemented in the city of Águeda which is considered the first smart city in Portugal. It comprised the former study in the country that examined the willingness of students (aged 15-21 years) to use e-bikes for daily trips to school and that gathered their preferences towards specific ICT related attributes. The methodology comprised a mobility survey and a stated-choice experiment (SC). The SC experiment gathered 2232 observations which were able to provide the relevant attribute trade-off information between car travel and e-bike (with or without specific ICT equipment). An extensive econometric analysis was performed to assess the nature and extent of students heterogeneity of preferences which also considered gender issues. The study aimed to contribute to the regional economic cluster on powered two-wheels' industry & innovation. Research results are interesting for city mobility policies and the regional industry as the possible integration of ICT equipment in e-bikes may speed up the market uptake of this technology.
Ano: 2017
Número Páginas:
12p.
Autor(es): Arsénio, E.; Dias, J.; Azeredo Lopes, S.; Pereira, H.
Revista: Transportation Research Procedia
Editor: Elsevier
Keywords: Sustainable urban mobility; Low carbon transport; Electric bicycles; Cycling to school
Info
Sustainable urban mobility plans:bridging climate change and equity targets?
The European Commission (EC) introduced the concept of Sustainable Urban Mobility Plans (SUMPs) as a new planning paradigm with a focus on peoples needs - Planning for people. This represents a change from traditional planning approaches centred on motorized road traffic/infrastructure provision and a shift towards more sustainable transport options. SUMPs require a long-term and sustainable vision for cities and these are to pay special attention to the participation of citizens and stakeholders and to coordination of policies across sectors (transport, land use, health, energy, and so on). The EC guidelines on developing and implementing SUMPs (EC, 2013) establish the following primary objectives of this new way of planning urban mobility: accessibility and quality of life, as well as sustainability, economic viability, social equity, health and environment quality. Since urban areas in Europe account for 23% to 25% of CO2 emissions from transport (EC, 2013c; EEA, 2014), SUMPs are expected to contribute to meet long-term climate change policy goals. However, it is less clear how SUMPs can contribute to address key societal challenges such as equity issues in accessibility. According to the EC guidelines SUMPs are still non-existing concepts in most European member states. However, several cities in Europe and beyond have already formulated and adopted SUMPs. This paper builds on a review of voluntary SUMPs developed in Portugal. A sample of forty case studies is considered in the analysis. It aims: a) to understand how climate change goals and equity issues in accessibility have been addressed through the first generation of SUMPs; b) to reflect on the role of SUMPs as tools to answer climate change goals without putting at risk social equity issues, and c) to outline further research needs in the SUMP approach. The research results are expected to give insights into social equity needs in urban transport and climate change adaptation policies in Europe.
Ano: 2016
Número Páginas:
22p.
Autor(es): Arsénio, E.; Martens, K.; Di Ciommo, F.
Revista: Research in Transportation Economics
Editor: Elsevier
Volume:
462.
Keywords: Urban transport policy; Equity in transport; Sustainable urban mobility plans; Climate change
Info
A ESTIMATIVA DE FREQUÊNCIAS ESPERADAS DE ACIDENTES NA IDENTIFICAÇÃO DE ZONAS DE ACUMULAÇÃO DE ACIDENTES
Neste artigo são apresentadas ferramentas destinadas ao planeamento e gestão das redes viárias que consideram explicitamente a segurança dos utentes vulneráveis. Essas ferramentas referem-se à criação de uma base de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, que permitiu a definição de mapas digitais, com possibilidade de uma grande diversidade de consultas; ao desenvolvimento de modelos de estimativa de frequência de acidentes para redes urbanas, em função de características do elemento rodoviário, que incorporam dados de exposição de utentes vulneráveis de forma a melhorar a capacidade de estimativa da sinistralidade em redes urbanas e á sua aplicação na identificação de zonas de acumulação de acidentes.
Ano: 2015
Autor(es): Vieira Gomes, S.
Revista: Revista Portuguesa de Sinalização
Editor: AFESP
Volume:
Número 6.
Keywords: Segmentos urbanos; Intersecções urbanas; Acidentes rodoviários; Modelação linear generalizada; Modelos de edtimativa de frequência de acidentes; SIG
Info
Dealing with uncertainty in detailed calibration of traffic simulation models for safety assessment
With the increasing level of detail of traffic simulation models, the need for a consistent understanding of simulators performance and the adequate calibration and validation procedures to control uncertainty is crucial, particularly in applications focusing on complex driving behaviour and detailed outputs, such as road safety analysis. In this work the calibration of traffic microscopic simulation models for safety analysis is analyzed considering four different key uncertainty sources: the input data, the calibration methodology, the model structure and its parameters, and the output data. The use of a multi-step sensitivity analysis (SA) framework is proposed and applied to the simulation of an urban motorway scenario, using a complex traffic simulation model with more than one hundred parameters. A three-level analysis is presented: (1) different advanced SA and calibration methods are described, compared and integrated in a multi-step global SA framework; (2) the proposed method is tested using both vehicle trajectory and aggregated traffic data to assess the impact of model parameters uncertainty and different types of input data on relevant outputs; and (3) accident and non-accident scenario-specific calibrations are performed to test the capacity of the simulator in replicating changes in detailed traffic and safety related measurements. Different techniques are adopted in each phase of the global SA and calibration method, attending to the problem complexity, the dimensionality of the experiment, and minimizing the necessary number of model evaluations. The proposed method successfully identified the role played by all parameters and by the model stochasticity on different safety outputs. The final model calibration, carried out by explicitly considering the presence of uncertainty at different levels, confirmed the potential of advanced microscopic traffic models to adequately replicate detailed traffic and safety measurements, shedding light on different aspects of the interaction between road safety and traffic dynamics.
Ano: 2015
Número Páginas:
395-412.
Autor(es): Lima Azevedo, C.; Ciuffo, B.; Cardoso, J. L.; Ben-Akiva, M.
Revista: Transportation Research Part C: Emerging Technologies
Editor: Elsevier
Volume:
58.
Keywords: Calibration; Uncertainty management; Traffic simulation; Road Safety
|
Comunicações
Info
Conceção de redes rodoviárias em zonas de 30 km/h
A conceção tradicional do ambiente rodoviário em zonas urbanas tem dado primazia ao espaço destinado ao tráfego automóvel, disponibilizando pouco espaço para os restantes utentes. A alteração do paradigma da mobilidade que vivemos atualmente tem invertido esta tendência, com uma crescente prioritização de espaço para os utentes vulneráveis. A conceção deste espaço deve no entanto ser efetuada de forma a garantir a segurança, a atratividade e a funcionalidade do espaço urbano, permitindo a fruição confortável desse espaço por todos os utentes. Neste contexto, as Zonas 30 podem ser vistas como soluções eficazes para alcançar esses objectivos. Neste resumo é apresentado o trabalho desenvolvido no âmbito de uma dissertação de mestrado sobre a conceção de redes rodoviárias em zonas de 30 km/h, no qual são apresentadas recomendações de soluções geométricas para estas áreas que assentam no conceito de estrada autoexplicativa e nos princípios do Sistema Seguro.
Ano: 2021
Autor(es): Ferreira, J.; Vieira Gomes, S.; Fontul, S.
Editor: ISEP
Keywords: Sistema Seguro; Arruamentos Urbanos; Segurança Rodoviária; Zona 30
Info
Identifying barriers to the potential implementation of road safety good practices in Africa
Africa is the worst performing Continent in road safety and year after year the situation worsens. To reverse this trend, it is essential to bear in mind that road safety problems in Africa should be preferably considered in their own context, as well as the proposed solutions to address them. Towards this direction, the objective of this paper is to present the development of the SaferAfrica Transferability Audit within the EU funded SaferAfrica project, and its pilot application to identify the barriers to the potential implementation of good road safety practices in five selected African Countries (Tunisia, Kenya, Cameroon, Burkina Faso, and South Africa). The proposed tool allows assessing whether the implementation of a given road safety intervention may face problems within one (or more) of the three domains of the Road Safety Space: Society/Culture, Economy, and Institutions. A total of 14 responses were obtained from stakeholders of the five countries. The stakeholders surveyed have different backgrounds: public employees, academics and non-governmental organizations participants. Cameroon had the largest participation, with a total of eight responses; two responses were received from Burkina Faso and Tunisia, each; and only one response was received from Kenya and South Africa. With a total of five responses, the Safer Road Users pillar of the African Road Safety Action Plan was the one with the highest participation. Economy issues are the most challenging for transferability of road safety interventions in Kenya, South Africa and Tunisia, while in Burkina Faso and Cameroon it is Society/Culture.
Ano: 2020
Número Páginas:
16.
Autor(es): Gonzalez-Hernandez, B.; Meta, E.; Persia, L.; Usami , D.; Cardoso, J. L.
Editor: Transportation Research Board
Keywords: Safety and Human Factors; Policy
Info
A comparative analysis of transport policies and planning towards sustainable mobility
The research presented in this article reflects on the transport policy and planning processes in France and Portugal. The transport policy and planning processes in France began in 1982 with the publication of the law of orientation for inland transports (LOTI). France with more than thirty years of experience on developing Plans de déplacements urbains (PDUs) - an integrated planning tool equivalent to Sustainable urban mobility plans (SUMPS), has these plans as mandatory for agglomerations of more than 100,000 inhabitants by its national law issued in 1996 and that was made effective in 2000. The French experience of transforming the PDUs in Plans de mobilité urbaine soutenable (PMUS) is then analysed. It has led to the development of SUMPS at the European level with the publication of the EC recommendations and its 2013 former publication revised in 2014 SUMP. However, SUMPS are still non-existing planning tools in several Member States. Considering the cross-fertilisation of planning experiences between France and Portugal, the transport policy and planning processes in Portugal are analysed. Portugal has recent mobility planning experiences that had been trigged somehow by the requirements set by the external funding mechanisms and the willingness of policy makers to move together for reaching common societal goals such decarbonisation. This is the case of the living lab experience of the Intermunicipal Community of the Algarve (AMAL), a Regional Transport Authority, responsible for the development of the designated Action Plan for Sustainable Urban Mobility (Regional PAMUS) that had the scientific support of the LNEC on its methodological aspects. The development of the regional PAMUS included several interconnected components that represented innovative features in the context: an integrated approach for the development of the plans, that included a collaborative platform of all the sixteen cities in the region and more than fifty stakeholders; a formal agreement signed by all the City Mayors to work together towards sustainable mobility goals; a common vision (to reach carbon neutrality in the long-run); a communication strategy to the public; the acquisition of cycling data using the STRAVA interface; and, the development of a technological component to facilitate the interaction with citizens (app VAMUS). The research considers the above mentioned cross-fertilization of experiences for conducting a SWOT analysis such that the remaining challenges for future mobility and accessibility in the member states analysed can be outlined.
Ano: 2019
Número Páginas:
19p.
Autor(es): Heddebaut, O.; Arsénio, E.
Editor: Elsevier
Keywords: Transport economics; Carbon-neutral mobility; Collaborative planning; Sustainable urban mobility plans; Transport policy; Transport planning
Info
A hybrid approach for prioritising road safety interventions in urban areas
Spatial organization in cities has often given a special attention to the requirements of motorized vehicles, neglecting pedestrians and cyclists needs. In order to privilege these road users, there is a need to consider their vulnerability and ensure they are provided with comfortable safety levels. Pedestrian safety can be improved with the knowledge of the underlying factors involved in crash occurrence and resulting injuries. The consideration of variables related to the built environment in explanation of crashes and injury outcomes is frequent and helpful. The city of Lisbon was the target for the development of models for the prediction of crash frequencies and their severity, wich could be used to identify high crash risk sites. This procedure contributed to support the intervention in road safety, concerning decisions about the choice of locations for intervention, the characterization of their safety problems, the selection of proper corrective interventions to implement as well as the assessment of the effects obtained with those interventions.
Ano: 2019
Autor(es): Vieira Gomes, S.; Roque, C.; Cardoso, J. L.
Editor: University of Brescia
Keywords: Injury Prediction Models; Crash prediction models; Pedestrian safety; Urban Areas; Road safety
Info
Análise da gravidade dos atropelamentos em Lisboa
A segurança dos peões pode ser melhorada através do conhecimento dos fatores influentes na ocorrência de acidentes e vítimas. Neste domínio é comum a consideração de variáveis relacionadas com o ambiente rodoviário para explicar o fenómeno e a gravidade das suas consequências. Nesta comunicação apresenta-se um estudo que visou aumentar o conhecimento nesta matéria, através da análise da influência de vários fatores nos níveis de gravidade das lesões por atropelamento, como sejam características selecionadas da infraestrutura, usos do solo, população e outros fatores de exposição. Foi utilizada para este fim uma base de dados georreferenciada de acidentes rodoviários e vítimas ocorridos em Lisboa entre 2008 e 2011.
Ano: 2019
Autor(es): Vieira Gomes, S.; Roque, C.; Cardoso, J. L.
Editor: CRP
Keywords: SIG; Modelo de regressão multinomial logística; Ambiente construído; Gravidade das lesões; Segurança pedonal
Info
Aplicação de modelos de duração à segurança rodoviária: o caso particular dos despistes.
A análise de dados de sinistralidade rodoviária tem sido usada para orientar políticas conducentes à melhoria da segurança rodoviária, bem como para melhorar a conceção e o dimensionamento de estradas e veículos. As metodologias estatísticas atualmente aplicadas à informação registada sobre sinistralidade permitem o desenvolvimento de modelos de estimativa de frequência dos acidentes e modelos explicativos da gravidade dos mesmos, capazes de serem usados para determinar com rigor a influência de múltiplos fatores na frequência e gravidade das lesões resultantes dos acidentes rodoviários. Outrossim, é possível aprofundar o conhecimento existente sobre os fatores acima mencionados, recorrendo a outras abordagens metodológicas. Neste contexto, é possível estudar o tempo decorrido (ou a distância percorrida) até à ocorrência de um evento ou a duração do mesmo. Dados como estes, são referidos na literatura como dados de duração, e podem ser analisados através de modelos de duração baseados em risco (Hazard-based duration models), os quais têm sido amplamente utilizados em campos como a medicina, as ciências sociais e a engenharia industrial. Contudo, são escassos os estudos que aplicaram modelos de duração à segurança rodoviária. Através do desenvolvimento destes modelos, o estudo reportado na presente comunicação permitiu identificar o efeito de diversos fatores na distância percorrida por um veículo descontrolado após sair da faixa de rodagem e embater num obstáculo perigoso presente na área adjacente à faixa de rodagem. Este estudo demonstra que os modelos de duração são adequados à investigação das distâncias percorridas por veículos descontrolados em despistes. Os resultados obtidos podem contribuir para a melhoria das características da área adjacente à faixa de rodagem e para a implementação de medidas mais eficientes para mitigar a gravidade dos despistes.
Ano: 2019
Autor(es): Roque, C. A.; Jalayer, M.
Editor: Centro Rodoviário Português
Keywords: Área adjacente à faixa de rodagem; Modelo Cox; Despiste; Modelo de duração
Info
Avaliação do impacte potencial do programa U-bike nos padrões de mobilidade da comunidade do Instituto Superior Técnico
O governo português lançou o programa nacional U-Bike que visa incentivar os alunos, professores e funcionários das universidades a optarem pela bicicleta nas suas deslocações regulares, através de um programa de aluguer de longa duração de bicicletas convencionais ou assistidas eletricamente. O objetivo deste artigo é analisar o potencial de adesão ao programa U-Bike e mudança de comportamento na mobilidade, baseado num inquérito on-line realizado à comunidade do campus da Alameda do Instituto Superior Técnico (IST), com 1406 respostas válidas. Os resultados sugerem que uma parte importante desta comunidade poderia aderir ao U-Bike, nomeadamente se as bicicletas fossem elétricas.
Ano: 2019
Autor(es): Moura, F.; Félix, R.; Roque, C. A.
Editor: Centro Rodoviário Português
Keywords: Instituto Superior Técnico (IST); Modelos Hierárquicos de Escolha Discreta; Mudança comportamental; Aluguer de longa duração; Sistemas partilhados de bicicletas
Info
Gravidade das consequências associadas à colisão com barreiras de segurança. Aspetos relevantes para as respetivas normas de desempenho
Os sistemas de retenção de veículos são utilizados para proteger os ocupantes dos veículos desgovernados do embate em obstáculos perigosos ou noutros veículos que circulem na faixa de rodagem de sentido contrária. A norma EN 1317 resulta da investigação realizada na Europa ao longo de vários anos e que permitiu desenvolver uma forma padronizada de caracterizar, ensaiar e avaliar o desempenho destes sistemas. A norma EN 1317 permite a comparação entre sistemas ensaiados sob as mesmas condições e permite obter um referencial para determinar e distinguir o âmbito de aplicação de cada sistema de retenção. Contudo, o desempenho de uma barreira em caso de choque depende de um conjunto de parâmetros contextuais, nomeadamente o local da respetiva instalação, as condições do solo e considerações ambientais, sendo igualmente importante considerar o ciclo de vida da barreira. Por outro lado, a gravidade dos ferimentos produzidos num acidente depende, fundamentalmente, dos limites de tolerância do ser humano relativamente a forças, desacelerações e tempos da correspondente atuação, bem como da eficácia dos dispositivos de absorção de energia cinética disponibilizados aos utentes rodoviários em caso de colisão. Os critérios de avaliação da gravidade das consequências são um meio de estimação do potencial de lesão para um ser humano ocupante de um veículo envolvido num acidente rodoviário. No caso das barreiras de segurança, o nível de gravidade do embate está associado exclusivamente ao risco de lesão para os ocupantes do veículo, o qual é estimado a partir de critérios de avaliação baseados no veículo. Neste âmbito, a análise reportada na presente comunicação permitiu constatar a ausência de estudos capazes de relacionar diretamente as consequências dos acidentes com os aspetos utilizados na norma EN 1317 para avaliação de desempenho dos sistemas de retenção de veículos, no que diz respeito aos níveis de gravidade nela definidos, bem como a ausência de referências na referida norma à gravidade esperada das lesões associadas a cada um destes níveis. Justifica-se assim a adoção de novos indicadores biomecânicos que representem mais fielmente o grau de segurança passiva disponibilizado pelos sistemas de retenção de veículos existentes.
Ano: 2019
Autor(es): Roque, C. A.; Cardoso, J. L.
Editor: Centro Rodoviário Português
Keywords: Nível de gravidade; EN 1317; Sistemas de retenção de veículos
Info
Investigação em segurança rodoviária em Portugal: a utilização de bases de dados hospitalares e sua ligação a outras bases
Da evolução crescente das tecnologias de informação, com a recolha de dados de forma sistemática e ininterrupta ao longo do tempo, associada aos avanços mais recentes nas metodologias estatísticas aplicadas à informação registada sobre sinistralidade, resulta a necessidade da junção de bases de dados de origens diversas. No presente estudo foram recolhidos dados de várias fontes. Por um lado, o conhecimento das características das vítimas foi possível através da base de dados disponibilizada pela Autoridade Nacional de Segurança Rodoviária (ANSR), a qual inclui um conjunto de parâmetros contextuais relativos às características das infraestruturas rodoviárias. A esta informação acresce a que diz respeito ao eventual transporte das vítimas para os hospitais, fornecida pelo Instituto Nacional de Emergência Médica (INEM). Tais dados são recolhidos nos casos de acidentes de maior gravidade, onde uma viatura de emergência médica é enviada ao local e as vítimas são transportadas para o hospital de referência. Este transporte é fornecido pelo INEM e os dados recolhidos para uma base de dados específica. Adicionalmente, foi utilizada a base de dados de morbilidade hospitalar da Administração Central do Sistema de Saúde. Esta base de dados, diz respeito ao período após a chegada das vítimas ao hospital, onde estas são avaliadas pela equipa clínica presente no serviço de urgência e em que, durante ou após o seu internamento, são classificadas perante um sistema de classificação pertencente à referida base de dados consoante o trauma apresentado. Serve o presente artigo para mostrar os principais desafios da junção de várias bases de dados de entidades tão distintas no seu âmbito de atuação e cujo resultado gerou a cooperação intersectorial entre a Escola Nacional de Saúde Pública (ENSP) da Universidade Nova de Lisboa, o Laboratório Nacional de Engenharia Civil (LNEC) e o INEM. No âmbito do presente artigo destaca-se a complementaridade dos dados disponíveis e dos conhecimentos existentes, na descodificação dos modelos biomecânicos, das lesões e das infraestruturas, mecanismo chave para o eficaz desenrolar da investigação e para a obtenção de resultados que cada entidade, trabalhando de forma independente, nunca conseguiria obter.
Ano: 2019
Autor(es): Santiago, R.; Roque, C. A.; Lavinha, P.; Nunes, C.
Editor: Centro Rodoviário Português
Keywords: Cooperação intersectorial; Segurança Rodoviária; Base de dados
Info
Mobilidade sustentável. A vertente do sistema seguro como elemento a integrar para abordagem holística dos problemas dos utentes vulneráveis
A mobilidade sustentável pode ser definida como a capacidade para atender às necessidades da sociedade (de livre movimentação, acessibilidade, comunicação, realização de trocas comerciais e de estabelecimento de relações) sem sacrificar outros valores humanos ou ecológicos essenciais, no presente e no futuro. A presente comunicação versa sobre a abordagem da segurança dos utentes rodoviários desprotegidos, particularmente nos aglomerados urbanos, dando-se ênfase à necessária introdução de novos indicadores de sinistralidade (conceito de acidente em viagem), à melhoria da supervisão da respetiva evolução e à configuração do espaço público na ótica do sistema seguro, imprescindíveis para atingir os objetivos do PENSE 2020.
Ano: 2019
Autor(es): Cardoso, J. L.; Vieira Gomes, S.
Editor: Centro Rodoviário Português
Keywords: Políticas de segurança de transportes; Indicadores socioeconómicos; Saúde pública; Segurança rodoviária
|
Livros
Info
The effect of low cost engineering measures and enforcement on driver behaviour and safety on single carriageway interurban trunk roads. In Advances in Human Aspects of Road and Rail Transportation.
The application of low-cost road and traffic engineering measures (LCEM) is a cost-effective method for reducing accidents and their consequences. Empirical evidence shows that enforcement contributes to improvements on driving behaviour and road safety; however, results from reducing enforcement are seldom presented. In this paper a presentation is made of the impact LCEM and changes in enforcement intensity had on selected driving behaviour variables and safety levels on a 170 km single carriageway trunk road. LCEM were implemented on the road, followed a year later by the commitment of exceptionally intense and severe law enforcement and, after two years, its relaxation. The impacts of these safety interventions were evaluated through observational before-after studies. The expected number of injury accidents was reduced by 41% (less 75% fatalities), when considering the combined effect of LCEM and enforcement; suppression of strict enforcement was related to a 20% increase in the number of fatalities.
Ano: 2012
Número Páginas:
10.
Autor(es): Cardoso, J. L.
Editor: CRC Press Taylor & Francis Group
Keywords: Driving behaviour; Low cost measures; Safety effects
Info
Application of a gap-graded asphalt rubber wearing course in the rehabilitation of the pavement of a stretch of the national road EN1 located in the north of Portugal - Field and laboratory case study
This case study refers to a successful application of an asphalt rubber wearing course in the frame of the rehabilitation of the pavement of the National Road EN 1 between Landiosa and Picoto. It concerns asphalt rubber manufactured by the wet process, using gap-graded aggregates. / O presente caso de estudo refere-se à aplicação bem sucedida de misturas com betume modificado com borracha reciclada de pneus em camada de desgaste, no âmbito das obras de reabilitação do pavimento da estrada nacional EN 1, entre Landiosa e Picoto. Diz respeito, em particular, ao fabrico, por via húmida, de mistura betuminosa com borracha utilizando agregados com granulometria descontínua.
Ano: 2010
Número Páginas:
20pp.
Autor(es): Batista, F. A.; Antunes, M. L.
Editor: LNEC
Volume:
NS 124 Não Seriados.
Keywords: Laboratory test; In situ test; National road; Rubber; Recycled materials; Road pavement rehabilitation; Asphaltic road pavement; Asphalt; Pt
Info
Modos Suaves, Manual de Boas Práticas para uma Mobilidade Sustentável
Manual de boas práticas para uma mobilidade sustentável, no âmbito do projecto nacional "Mobilidade Sustentável" coordenado pela Agência portuguesa do Ambiente (Vol. II). O projecto Mobilidade Sustentável envolveu uma rede de 15 centros de investigação/universidades do país, incluindo o LNEC.
Ano: 2010
Número Páginas:
274p..
Autor(es): Arsénio, E.; Viegas, F.
Editor: Agência Portuguesa do Ambiente (APA)
Volume:
Vol. II.
Keywords: Boas práticas; Portugal; Municípios; Planos de mobilidade; Mobilidade sustentável
Info
Projecto Mobilidade Sustentável. Concepção, Principais Conclusões e Recomendações
Nesta publicação apresentam-se os aspectos relativos à concepção do projecto Mobilidade Sustentável, principais conclusões e recomendações.
Ano: 2010
Número Páginas:
80p..
Autor(es): Arsénio, E.; Viegas, F.
Editor: Agência Portuguesa do Ambiente (APA)
Volume:
Volume I.
Keywords: Planeamento de transportes; Mobilidade sustentável
|
Capítulos de Livros
Info
Modelos de Duração Aplicados à Engenharia de Transportes
O tempo decorrido (ou a distância percorrida) até à ocorrência de um evento, ou a duração do mesmo, podem ser analisados através de modelos de duração baseados em risco (hazard-based duration models), os quais têm sido amplamente utilizados em campos como a medicina, as ciências sociais e a engenharia industrial. Contudo, são relativamente escassos os estudos que aplicaram modelos de duração à engenharia de transportes. Este capítulo inclui dois exemplos de aplicação de modelos de duração à investigação em engenharia de transportes. O primeiro diz respeito às distâncias percorridas por veículos descontrolados em despistes ocorridos na Carolina do Norte (E.U.A.). O segundo refere-se ao tempo decorrido até à transferência modal nas deslocações para a escola de um conjunto de alunos de 162 turmas de 51 escolas do ensino básico em Portugal.
Ano: 2021
Número Páginas:
109-124.
Autor(es): Roque, C. A.
Revista: Modelação Matemática em Engenharia de Transportes. A Experiência do Departamento de Transportes do LNEC
Keywords: Modelo de duração; Engenharia de transportes
Info
Modelos de estimativa de frequência de acidentes rodoviários
Em Portugal, a investigação sobre o conhecimento dos fatores que afetam a probabilidade de ocorrência de acidentes tem-se centrado essencialmente nas estradas interurbanas. No entanto, as zonas urbanas, onde ocorrem elevadas percentagens de acidentes corporais requerem uma atenção prioritária. Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária em meio urbano, através da criação de ferramentas que podem ser utilizadas em métodos de intervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nas fases de planeamento e gestão das redes viárias. Uma das referidas ferramentas resultou da elaboração de modelos de estimativa de frequência de acidentes para redes urbanas, segundo diversas desagregações, em função de características do elemento rodoviário: em intersecções (três ramos, quatro ramos e rotundas) e em segmentos; segundo o tipo de acidente (atropelamentos e restantes acidentes com vítimas); e segundo a inclusão de variáveis explicativas relacionadas com o ambiente rodoviário: simplificados (apenas com as variáveis de exposição) e globais (com todas as potenciais variáveis explicativas). O desenvolvimento destes modelos foi apoiado numa base de dados georreferenciada dos acidentes rodoviários ocorridos em Lisboa entre 2004 e 2007, com a qual foi possível explorar os dados de sinistralidade na área geográfica em análise. Estas ferramentas podem ser usadas diretamente na gestão das infraestruturas rodoviárias da cidade de Lisboa e, após pequenas adaptações, estendidas a outros municípios, dotando as respetivas entidades competentes em matéria de segurança rodoviária com informação rigorosa e detalhada sobre os fatores intervenientes na ocorrência de acidentes em meio urbano e a respetiva distribuição espacial.
Ano: 2021
Número Páginas:
71-96pp.
Autor(es): Vieira Gomes, S.; Cardoso, J. L.
Revista: Modelação Matemática em Engenharia de Transportes
Editor: LNEC
Keywords: Método empírico de Bayes; Acidentes rodoviários; Modelação linear generalizada; Zonas de acumulação de acidentes; Modelos de estimativa de frequência de acidentes
Info
Modelos Explicativos da Gravidade dos Acidentes Rodoviários
Os dados discretos ou em escala nominal desempenham um papel fundamental nos transportes porque muitas análises de políticas lidam com estes tipos de dados. Exemplos de dados discretos nos transportes incluem o modo de transporte (automóvel, autocarro, comboio), o tipo ou categoria de veículo e o tipo de acidente rodoviário (despistes, colisões frontais, colisões traseiras, etc.). O conhecimento do efeito das diferentes intervenções de segurança rodoviária na redução da gravidade das lesões resultantes de acidentes rodoviários exige uma avaliação empírica detalhada das interações, reconhecidamente complexas, entre veículos, estrada e fatores humanos. Os avanços mais recentes nas metodologias estatísticas aplicadas a dados discretos sobre sinistralidade rodoviária permitiram o desenvolvimento de modelos sofisticados capazes de serem usados para determinar com rigor a influência dos fatores acima referidos nos níveis de gravidade das lesões resultantes dos acidentes rodoviários. Neste contexto, a aplicação de modelos de resultado discreto permite identificar um conjunto de fatores, relacionados com a envolvente rodoviária, que são estatisticamente relacionáveis com a gravidade das lesões dos utentes envolvidos em acidentes rodoviários, permitindo aperfeiçoar a conceção e o dimensionamento das estradas, bem como orientar políticas conducentes à melhoria da segurança rodoviária. Este capítulo inclui um exemplo de aplicação do modelo logit multinomial usando a gravidade das lesões no condutor como variável de resposta.
Ano: 2021
Número Páginas:
97-108.
Autor(es): Roque, C. A.; Cardoso, J.
Revista: Modelação Matemática em Engenharia de Transportes. A Experiência do Departamento de Transportes do LNEC.
Keywords: Acidente rodoviário; Modelo de resultado discreto; Modelo logit multinomial
Info
A hybrid approach for prioritising road safety interventions in urban areas
Spatial organization in cities has often given a special attention to the requirements of motorized vehicles, neglecting pedestrians and cyclists needs. In order to privilege these road users, there is a need to consider their vulnerability and ensure they are provided with comfortable safety levels. Pedestrian safety can be improved with the knowledge of the underlying factors involved in crash occurrence and resulting injuries. The consideration of variables related to the built environment in explanation of crashes and injury outcomes is frequent and helpful. The city of Lisbon was the target for the development of models for the prediction of crash frequencies and their severity, wich could be used to identify high crash risk sites. This procedure contributed to support the intervention in road safety, concerning decisions about the choice of locations for intervention, the characterization of their safety problems, the selection of proper corrective interventions to implement as well as the assessment of the effects obtained with those interventions.
Ano: 2020
Número Páginas:
204-208pp.
Autor(es): Vieira Gomes, S.; Roque, C. A.; Cardoso, J. L.
Revista: Proceedings of the XXIV International Conference on Living and Walking in Cities.
Editor: CRC Press, Taylor & Francis Group
Keywords: High crash risk sites; Empirical Bayes method; GIS; Accident prediction models
Info
The role of sustainable urban mobility plans and ICT to improve public space for social inclusion
The importance of sustainable urban mobility plans is widely recognized by local and regional authorities across Europe. Technological innovation opportunities such as those offered by current and future ICT can contribute for cities to advance towards sustainable mobility and accessibility for inclusive public spaces. This article is built on an innovative living lab experience of the Intermunicipal Community of the Algarve (AMAL), the regional transport authority, scientifically supported by the LNEC, in Portugal, that comprised the development of the designated Actions Plans for Sustainable Urban Mobility (PAMUS) for a network of sixteen cities. Following the Regional Operational Program 2014-2020, these plans were to support the transition for a low carbon economy in all sectors, including mobility and transport. Inspired by best practices in Europe, the development of the regional PAMUS included several interconnected components: an integrated approach for the development of the plans that included a collaborative platform of stakeholders, a formal commitment signed by all Mayors to work together towards sustainable mobility goals, a communication strategy to the public, the development of a technological component (app VAMUS) and the acquisition of real-time cycling data using the STRAVA interface. This article is focusing on the potential benefits related to using the technological component of the PAMUS - the app VAMUS which means we go together (towards sustainable mobility goals). The app is currently available for two major mobile platforms (iOS and Android) and it provides information on the available public transport options and their connectivity along with other indicators as an incentive for users to choose more sustainable travel options. The PAMUS effort emerges as a disruptive approach to trigger behavioral changes for more cycling and walking (instead of car), leading to enhancing public space and quality of life objectives such as social inclusion and low carbon mobility.
Ano: 2018
Número Páginas:
109-122pp.
Autor(es): Arsénio, E.; Coelho, J.
Revista: Neighbourhood & City - Between digital and analogue perspectives
Editor: UL/COST
Keywords: Transport decarbonisation; Low carbon mobility; Accessibility; Transport planning and policies; Public spaces; App; Information and communications technology; Sustainable mobility
|
Teses de Doutoramento
Info
Avaliação da Influência da Infra?estrutura na Segurança Rodoviária em Meio Urbano
O conhecimento dos factores que afectam a probabilidade de ocorrência de um acidente é uma área de investigação relevante de há muitas décadas devido aos enormes custos para a sociedade dos acidentes rodoviários. Em Portugal, os desenvolvimentos nesta matéria centraram-se essencialmente nas estradas inter-urbanas. No entanto, as zonas urbanas, caracterizadas por elevadas percentagens de acidentes corporais (cerca de 69% do total entre 2004 e 2008), requerem uma atenção prioritária. Com o presente estudo pretendeu contribuir-se para a melhoria da segurança rodoviária em meio urbano, através da criação de ferramentas que podem ser utilizadas em métodos de intervenção em que a segurança dos utentes vulneráveis seja considerada explicitamente nas fases de planeamento e gestão das redes viárias. A primeira ferramenta correspondeu à criação de uma base de dados georreferenciada dos acidentes rodoviários ocorridos na cidade de Lisboa entre 2004 e 2007, que permitiu a definição de mapas digitais, com possibilidade de uma grande diversidade de consultas e de cruzamentos de informação. A segunda ferramenta refere-se à elaboração de modelos de estimativa de frequência de acidentes para redes urbanas, segundo diversas desagregações: segundo o elemento rodoviário: em intersecções (intersecção de três ramos, intersecção de quatro ramos e rotundas) e em segmentos; segundo o tipo de acidente: atropelamentos e restantes acidentes com vítimas; e segundo a inclusão de variáveis explicativas relacionadas com o ambiente rodoviário: simplificado (apenas com as variáveis de exposição) e global (com todas as potenciais variáveis explicativas). Foi considerada a incorporação de dados de exposição relativos aos utentes vulneráveis por forma a melhorar a capacidade de estimativa da sinistralidade em redes urbanas. Estas duas ferramentas podem ser usadas directamente na gestão de infra-estruturas, dotando as entidades com competência em matéria de segurança rodoviária com informação rigorosa e detalhada sobre os factores intervenientes na ocorrência de acidentes em meio urbano e respectiva distribuição espacial.
Ano: 2010
Número Páginas:
371.
Autor(es): Vieira Gomes, S.
Keywords: Sistemas de informação geográficos; Modelos matemáticos; Zona urbana; Segurança rodoviária
Info
Estudo das Relações entre as Características da Estrada, a Velocidade e os Acidentes Rodoviários. Aplicação a Estradas de Duas Vias e Dois Sentidos.
No período de 1988 a 1993, ocorreram anualmente nas estradas rurais de uma faixa de rodagem e dois sentidos da Rede Rodoviária Nacional de Portugal, em média, cerca de 1471 acidentes corporais anuais em curva fora de cruzamentos. Estes acidentes constituem cerca de 33% dos acidentes corporais fora de cruzamentos participados na referida rede. O objectivo do presente trabalho é contribuir para o conhecimento da influência da estrada na ocorrência de acidentes e para o desenvolvimento de um método para avaliação de traçados rodoviários do ponto de vista da segurança. Foram realizadas in situ campanhas de recolha de dados sobre as distribuições de velocidades dos condutores, os quais foram relacionados com as características geométricas das estradas e com a respectiva sinistralidade. Foram desenvolvidos modelos para estimativa de perfis de velocidade de circulação livre, bem como modelos para estimativa da frequência de acidentes, em estradas de uma faixa de rodagem e dois sentidos, adaptados às condições de tráfego nacionais. Os referidos modelos foram integrados num procedimento para detectar inconsistências de velocidade em especial associadas à ocorrência de acidentes em curva, o qual foi usado para fundamentar uma proposta de quantificação de critérios de homogeneidade de traçado, adaptados à realidade do sistema de tráfego rodoviário português.
Ano: 1996
Autor(es): Cardoso, J. L.
Keywords: estrada de 2 vias e 2 sentidos; Modelos de frequência de acidentes; Homogeneidade de traçado; Velocidade; Acidente rodoviário; Características da estrada
|
Dissertações de Mestrado
Info
Métodos de estimativa de volumes anuais de tráfego rodoviário
As características de utilização do automóvel no que diz respeito à flexibilidade nas distâncias praticáveis, ao conforto e à independência horária tornaram-no no meio de transporte mais utilizado no contexto actual da procura de transportes. A quantificação do uso do automóvel de forma regular e diversificada tornou-se numa necessidade manifesta da nossa sociedade, face aos impactes negativos associados ao tráfego rodoviário, tais como o congestionamento, a poluição ou a sinistralidade. O número de veículos que circulam numa rede rodoviária, ou parte dela, representado pelo volume de tráfego rodoviário, constitui uma fonte de informação fundamental sobre o estado de um determinado sistema de tráfego e na análise dos respectivos impactes. No presente trabalho é analisado o cenário actual em que se enquadram as estimações de volumes anuais de tráfego rodoviário ao nível nacional, lançando as bases para o desenvolvimento de um modelo sistemático de estimação para Portugal. São analisados os diferentes métodos internacionais de estimação de volumes de tráfego rodoviário, referindo as particularidades no seu desenvolvimento e na sua utilização. É feita uma análise dos dados relevantes actualmente disponíveis em Portugal e apresentado o desenvolvimento de um método de estimação de volumes anuais de tráfego rodoviário ao nível nacional, baseado fundamentalmente nas leituras de conta-quilómetros realizadas em inspecções técnicas. Por fim, são apresentadas as estimativas dos volumes de tráfego rodoviário ao nível nacional para os anos de 2004, 2005 e 2006, segundo o método de estimação desenvolvido. Estes valores constituem a primeira estimativa nacional de volumes de tráfego desagregados por tipo de veículo e tipo de estrada, permitindo um melhor conhecimento das distâncias percorridas segundo estas variáveis e uma actualização das estimativas agregadas existentes.
Ano: 2008
Autor(es): Lima Azevedo, C.
Keywords: Distâncias percorridas; Veículos x quilómetro; Vmt (vkt); Modelo de estimação; Volume de tráfego rodoviário nacional; Volume de circulação
Info
Medidas correctivas da infra-estrutura para melhoria da segurança rodoviária
Nesta dissertação de Mestrado aborda-se o tema das medidas correctivas da infra-estrutura e descrevem-se os principais aspectos a considerar num sistema de recolha e organização de informação relevante para avaliação dos resultados obtidos com as medidas aplicadas. Designam-se por medidas correctivas da infra-estrutura as intervenções que se destinam a corrigir as deficiências da infra-estrutura rodoviária que contribuem para a ocorrência de acidentes rodoviários ou a gravidade das suas consequências, para melhoria do nível de segurança do sistema de tráfego. Neste documento são apresentadas as conclusões da análise da aplicação de medidas correctivas da infra-estrutura em diversos países, bem como informação básica sobre as medidas mais comuns, designadamente no que se refere a critérios de selecção, a aspectos gerais de dimensionamento, a resultados obtidos e a custos de construção, contemplando-se, também, as vantagens e desvantagens registadas com a respectiva aplicação. São abordados aspectos relacionados com o necessário acompanhamento da aplicação deste tipo de medidas no nosso País, através de um plano de supervisão sistemática da respectiva eficácia. Por fim, é realizada a análise da evolução da sinistralidade da EN 6 na sequência de um conjunto de intervenções correctivas, através de um estudo antes-depois, no qual são avaliados os efeitos obtidos pela aplicação de medidas correctivas, quer ao nível do comportamento de condução quer quanto ao número de acidentes e respectiva gravidade.
Ano: 2004
Número Páginas:
205.
Autor(es): Vieira Gomes, S.
Keywords: Ambiente rodoviário; Tratamento de zonas de acumulação de acidente; Medidas de engenharia; Risco de acidente; Medidas de engenharia de baixo custo; Segurança rodoviária
|
Relatórios
Info
Technical and scientific foundations for the 2021-2030 Road Safety Strategy - Methodology for the preparation of biennial action plans
The Portuguese Road Safety Authority (Autoridade Nacional de Segurança Rodoviária
Ano: 2021
Autor(es): Wegman, F.; Roque, C. A.; Vieira Gomes, S.; Cardoso, J. L.
Keywords: Statistics; Planning; Strategy; Road Safety
Info
Deteção de zonas de acumulação de acidentes na Rede Rodoviária Nacional - Período de 2013 a 2017
O presente relatório foi elaborado no âmbito da colaboração do LNEC com a Autoridade Nacional de Segurança Rodoviária (ANSR), o Instituto da Mobilidade e dos Transportes (IMT) e a Infraestruturas de Portugal S.A., na identificação de zonas de acumulação de acidentes rodoviários na Rede Rodoviária Nacional com base em dados do período de 2013 a 2017. O estudo enquadra-se na medida A20.80 do PENSE 2020 - Plano Estratégico Nacional de Segurança Rodoviária. Neste relatório são apresentados os resultados obtidos com a deteção de zonas de acumulação de acidentes nas estradas da Rede Rodoviária Nacional não subconcessionadas pela IP, bem como algumas características da sinistralidade nessas zonas.
Ano: 2020
Autor(es): Cardoso, J. L.
Keywords: Rede nacional; Sinistralidade; Zona de acumulação de acidentes
Info
Fascículo II - Características geométricas para rodovias com tráfego motorizado.
O presente trabalho insere-se no âmbito de um protocolo entre o IMT - Instituto da Mobilidade e dos Transportes, I.P. (IMT) e o Laboratório Nacional de Engenharia Civil (LNEC) e destina-se a dar resposta à medida 25.92 do objetivo estratégico Infraestruturas Mais Seguras da Estratégia Nacional de Segurança Rodoviária PENSE2020, consistindo na elaboração de uma norma técnica para aplicação a arruamentos urbanos, que possa contribuir para promover a melhoria da segurana da rede rodoviária municipal, designadamente através da adoção, no País, de critérios uniformes no dimensionamento do traçado e no ordenamento da envolvente dos arruamentos urbanos, aspetos importantes para a obtenção de rodovias autoexplicativas necessárias para a pretendida abordagem do Sistema Seguro. A norma técnica está organizada em quatro fascículos, destinados a contemplar os fundamentos sobre utentes e rede rodoviária, as características geométricas para rodovias com tráfego motorizado e não motorizado e as medidas de acalmia de tráfego aplicáveis a cada tipo de arruamento. Neste Fascículo II, relativo às caraterísticas geométricas para rodovias com tráfego motorizado, incluem-se considerações sobre as características dos diferentes tipos de vias, consoante o nível hierárquico, inclusive para atravessamentos de povoação e zonas de 30km/h. São também apresentados os elementos específicos para o transporte público (autocarros, elétricos e táxis) e para o estacionamento, relevantes para o adequado desenho da envolvente urbana.
Ano: 2020
Autor(es): Vieira Gomes, S.; Roque, C.; Arsénio, E.; Ferreira, J.; Cardoso, J.L.
Keywords: Ambiente rodoviário; Arruamentos urbanos; Norma de traçado
Info
Fascículo III - Características geométricas para vias de tráfego não motorizado
O presente trabalho insere-se no âmbito de um protocolo entre o IMT - Instituto da Mobilidade e dos Transportes, I.P. (IMT) e o Laboratório Nacional de Engenharia Civil (LNEC) e destina-se a dar resposta à medida 25.92 do objetivo estratégico Infraestruturas Mais Seguras da Estratégia Nacional de Segurança Rodoviária PENSE2020, consistindo na elaboração de uma norma técnica para aplicação a arruamentos urbanos, que possa contribuir para promover a melhoria da rede rodoviária municipal, designadamente através da adoção, no País, de critérios uniformes no dimensionamento do traçado e no ordenamento da envolvente dos arruamentos urbanos, aspetos importantes para a obtenção de rodovias autoexplicativas necessárias para o pretendido Sistema Seguro. A norma técnica está organizada em quatro fascículos, destinados a contemplar os fundamentos sobre utentes e rede rodoviária, as características geométricas para rodovias com tráfego motorizado e não motorizado e as medidas de acalmia de tráfego aplicáveis a cada tipo de arruamento. Apresenta-se neste documento o Fascículo III, relativo às caraterísticas geométricas para vias de tráfego não motorizado, onde se incluem considerações sobre os caminhos pedonais e sobre as vias cicláveis. São também apresentadas considerações sobre o estacionamento de veículos não motorizados e as particularidades da conceção das zonas de coexistência.
Ano: 2020
Autor(es): Vieira Gomes, S.; Cardoso, J.L.; Roque, C.; Arsénio, E.; Ferreira, J.
Keywords: Ambiente rodoviário; Arruamentos urbanos; Norma de traçado
Info
Fascículo IV - Medidas de acalmia e outros dispositivos de tráfego.
O presente trabalho insere-se no âmbito de um protocolo entre o IMT - Instituto da Mobilidade e dos Transportes, I.P. (IMT) e o Laboratório Nacional de Engenharia Civil (LNEC) e destina-se a dar resposta à medida 25.92 do objetivo estratégico Infraestruturas Mais Seguras da Estratégia Nacional de Segurança Rodoviária PENSE2020, consistindo na elaboração de uma norma técnica para aplicação a arruamentos urbanos, que possa contribuir para promover a melhoria da rede rodoviária municipal, designadamente através da adoção, no País, de critérios harmonizados no dimensionamento do traçado e no ordenamento da envolvente dos arruamentos urbanos, aspetos importantes para a obtenção de rodovias autoexplicativas necessárias para o pretendido Sistema Seguro. A norma técnica está organizada em quatro fascículos, destinados a contemplar os fundamentos sobre utentes e rede rodoviária, as características geométricas para rodovias com tráfego motorizado e não motorizado e as medidas de acalmia de tráfego aplicáveis a cada tipo de arruamento. Apresenta-se neste documento o Fascículo IV, relativo às medidas de acalmia e outros dispositivos de tráfego, compreendendo a recomendação dos dispositivos suscetíveis de serem aplicados em arruamentos urbanos e destinados ao tráfego de peões, velocípedes, transportes públicos, misto, e veículos ligeiros. São também apresentadas características a considerar por categoria hierárquica da rede e por fim a pormenorização dos dispositivos de tráfego, no que se refere aos requisitos técnicos, princípios de dimensionamento e vantagens e desvantagens da sua aplicação.
Ano: 2020
Autor(es): Vieira Gomes, S.; Roque, C.; Cardoso, J.L.; Ferreira, J.
Keywords: Ambiente rodoviário; Arruamentos urbanos; Norma de traçado
Info
A TRAIN-THE-TRAINER COURSE
Work package 6 of the SaferAfrica project aims to identify training needs and develop capacity building programs focused on road safety in African countries. Part 2 of WP6 concentrates on train the-trainer activities for universities. The main objective was the development of a train-the-trainer manual in the way that trainers and future trainers will be provided with the necessary tools and skills to prepare their own road safety courses. This manual was developed in 2018 and is now available as Deliverable D6.2. (Sanon, C. et al., 2018). The first part of the Manual presents basic information about the nature of road safety and the Safe System approach, as well as how this knowledge can play a part in the education of different professionals. Special attention was given to road safety audits and inspections. The second part deals with the methodological and didactics of teaching this specific content, mainly focusing on the definition of learning outcomes and the specificity of the learning processes in adults. Giving training is however a matter of more personal competences and not only of technical skills. Providing a manual is important and can give future trainers a good support, but it is not enough. Competences are acquired through exercises, experiences and concrete and constructive feedback. For the above reason, in an early stage of the development of this manual in task 6.2, the workgroup decided to develop also a real Train-The-Trainer course, based on the Manual. In order to take the most of this trial, it was decided to develop a real course in Africa, to see if the foreseen approach was the most appropriate. After discussions during the project meeting in Abidjan (November 2018), the possibility was created in Cameroon in coordination with task 6.4 (twinning program on research capacity needs). In this annex of the Deliverable D6.2, an overview of this try-out version is detailed. In the first part of this document, the preparation of the course is discussed (aims, suggested program, target group and how we invited participants). A second part describes the course, detailing the content and the adaptations we made during the course. The third part is meant as an evaluation of this course. Both feedback of the participants and experience of the three trainers are presented. The most important information from this section is related with the lessons we could learn from this first try-out, which will lead us to a few suggestions and a canvas for further TTT-initiatives (last part).
Ano: 2019
Autor(es): Vieira Gomes, S.; Wounba, J.; Kluppels, L.
Keywords: Safe System; Train-The-Trainer course; Africa; capacity building; training needs; Road safety
Info
D3.4 Capacity building initiatives
The first main objective of work package 3 is to assess the implementation of the Action Plan 20112020 (AU?UNECA, 2010). This assessment has been supported by SWOT and PESTEL analysis completed at different geo?political scales (continental, regional economic communities/corridors and country) and is described in deliverable 3.1. The second main objective of work package 3 is to define initiatives for different topics (i.e., road safety policies, road safety and traffic management, capacity building and other road safety interventions). Those initiatives are designed to foster the implementation of the Action Plan and to contribute to a better situation in terms of road safety. This deliverable deals with the definition of initiatives for capacity building and training in the African continent. Deliverable 6.1 Road Safety Curriculum for Africa highlights the specific needs and demands for training and education according to African education experts (Vieira Gomes, Kluppels & Schemers, 2017). One of the needs emphasizes the multidisciplinary characteristics of the road safety expertise. Subsequently, a lot of different professionals are active in different areas of road safety. Although cooperation between different road safety professionals is wanted to enhance road safety in general, this deliverable tries to categorize different capacity building initiatives (i.e., available courses) according to different groups of road safety professionals. A general education for all road safety experts is certainly needed. But after a general introduction to road safety, more specific capacity building initiatives for different road safety professionals are required in the African continent. This doesnt exclude that some capacity building initiatives in this deliverable are applicable for two or more groups of road safety professionals. According to the Transportation Research Board (2007), road safety professionals have been defined as workers who spend all or most of their workday on matters pertaining directly to road safety, such as assessing safety performance and needs, planning, developing and implementing safety initiatives and taking specific actions related to safety (TRB, 2007). In this deliverable road safety initiatives are proposed for six different groups of road safety professionals. These groups are data collectors and analysts, health personnel, public policy makers, road safety engineers, teachers and educators and traffic police. The described capacity building initiatives in this report serve as a guideline for capacity building for the previously mentioned target groups. Off course, the proposed initiatives need to be further adjusted to the specific requirements for the group of road safety professionals within the country or region where they would be used.
Ano: 2019
Autor(es): Boudry, E.; Vieira Gomes, S.; Cardoso, J.L.; Remacle, E.; Sanon, C.; Martin, J.; Mignot, D.; Nabavi, M.; Talbot, R.; Welsh, R.
Keywords: Africa; road safety interventions; capacity building; traffic management; road safety policies; Road safety
Info
D3.5 - ROAD SAFETY INTERVENTIONS INITIATIVES
According to the Global Status Report on Road Safety 2018 (WHO, 2018b), the number of road traffic injuries claimed 1.35 million lives in 2016. Based on the WHO regions, road traffic fatality rates are increasing in the African region from 26.1 fatalities per 100,000 inhabitants in 2013 to 26.6 fatalities per 100,000 inhabitants in 2016. Therefore, the African region is the worst performing WHO region. Over the same period, there was an improvement in road fatality rates in the WHO Europe region. Road traffic injury in Africa is even expected to worsen further, with an increasing of 55% in road traffic fatalities over the period from 2016 until 2030 (WHO, 2018c). SaferAfrica project aims at establishing a Dialogue Platform between Africa and Europe focused on road safety and traffic management issues. It will represent a high?level body with the main objective of providing recommendations to update the African Road Safety Action Plan and the African Road Safety Charter, as well as fostering the adoption of specific initiatives, properly funded. The first main objective of work package 3 is to assess the implementation of the Action Plan 20112020 (AU?UNECA, 2010). This assessment has been supported by SWOT and PESTEL analysis completed at different geo?political scales (continental, regional economic communities/corridors and country) and is described in deliverable 3.1. The second main objective of work package 3 is to define initiatives for different topics (i.e., road safety policies, road safety and traffic management, capacity building and other road safety interventions). Those initiatives are designed to foster the implementation of the Action Plan and to contribute to a better situation in terms of road safety. The final aim is to prepare information to support the discussions with the Dialogue Platform Management Board. This deliverable deals with the operational dimension of the Level/Layer matrix and more specific, the elaboration of initiatives about road safety interventions. Hereby, road safety interventions have been defined as actions designed to target consciously chosen safety improvement objectives within the road safety system (Wilpert & Fahlbruch, 2002). The categorisation of the road safety interventions is made based on the traditional five pillars used by the UN (2011). The road safety interventions in this report were selected based on the needs described in the capacity reviews of WP5, the applicability to the African continent and the concreteness of the road safety intervention. The described road safety interventions in this report serve as a guideline for the implementation of some concrete initiatives within the pillars of safer roads and mobility, safer vehicles, safer road users and post?crash response. Of course, they will need some specific adaptations and adjustments to the characteristics of the country or region where they would be implemented.
Ano: 2019
Autor(es): Boudry, E.; Vieira Gomes, S.; Fernández, E.; Sanon, C.
Keywords: Africa; road safety interventions; capacity building; traffic management; road safety; road safety policies
Info
Fascículo I - Fundamentos sobre Utentes e Rede Rodoviária.
O presente trabalho insere-se no âmbito de um protocolo entre o IMT - Instituto da Mobilidade e dos Transportes, I.P. (IMT) e o Laboratório Nacional de Engenharia Civil (LNEC) e destina-se a dar resposta à medida 25.93 do objetivo estratégico Infraestruturas Mais Seguras da Estratégia Nacional de Segurança Rodoviária PENSE2020, consistindo na elaboração de uma norma técnica para aplicação a arruamentos urbanos, que possa contribuir para promover a melhoria da rede rodoviária municipal, designadamente através da adoção, no País, de critérios harmonizados no dimensionamento do traçado e no ordenamento da envolvente dos arruamentos urbanos, aspetos importantes para a obtenção de rodovias autoexplicativas necessárias para o pretendido Sistema Seguro. A norma técnica está organizada em quatro fascículos, destinados a contemplar os fundamentos sobre utentes e rede rodoviária, as características geométricas para rodovias com tráfego motorizado e não motorizado e as medidas de acalmia de tráfego aplicáveis a cada tipo de arruamento. Apresenta-se neste documento o Fascículo 1, relativo aos fundamentos sobre utentes e rede rodoviária, onde se incluem considerações sobre a hierarquia da rede viária, se elencam as características dos vários constituintes do sistema de tráfego relevantes para o traçado, os elementos básicos de projeto e os parâmetros geométricos relevantes para a conceção do ambiente rodoviário urbano.
Ano: 2019
Autor(es): Vieira Gomes, S.; Cardoso, J.L.; Roque, C.; Macedo, A. L.
Keywords: Ambiente rodoviário; Arruamentos urbanos; Norma de traçado
Info
D6.2 Train-the-trainer manua
This manual is meant to support lecturers who wish to incorporate a course on road safety into the curriculum of another educational program. Various professions have linkages with the problems and issues related to road safety. For some of these it is evident: engineering and technology, political and social sciences. In other professions, specific aspects of road safety can hold important input. ? Road safety education requires a place in the training of teachers (primary and secondary schools), since children need to be taught as early as possible how to behave safely on the road. ? Government wanting to set up an effective enforcement plan need to ensure police men have good knowledge of road safety behaviour. ? For new drivers, learning to drive concerns not only traffic rules and handling a car, but also understanding the psychology of a road user and traffic in general. Furthermore, many more professions deal with road safety issues in their job which makes it worthwhile considering implementing aspects of road safety into the existing curriculum. The first part of this manual will focus on the importance of implementing road safety curricula. The first chapter explains the current road safety situation and related problems in Africa. This overview provides arguments for exposing more students to road safety expertise. Chapter two speaks about the most common framework in road safety: the Safe System approach. It provides a definition and broader context on what road safety really constitutes: a systematic and combined approach of all important elements. Road safety is not only a matter of building strong roads it requires various coordinated actions and significant engagement from authorities, stakeholders and road users. On the basis of these two theoretical chapters, examples will be given to provide an indication of which learning outcomes could be of relevance for which profession/curriculum. These examples are not exhaustive, and are primarily intended to inspire the reader for the analysis of their situation. This is vital, since road safety implementation will vary depending on the context of a countrys organisational structure with regard to traffic and road safety. Special attention will be given to the education of road safety auditors and road safety inspectors. The second part of this manual is more didactical. It discusses the main aspects of organising a specific curriculum. Experienced teacher will already have sufficient background in developing a course, however we recommend to pay particular attention to the chapter on learning outcomes. A key error experts make when organising trainings is the attempt to pass on their entire knowledge to their students, even if these students have an entirely different background and profession. Emphasising how students can apply their newly gained road safety knowledge in their profession is crucial in order to ensure engagement during these trainings. The following chapter on Tools and Methodology discusses three interesting road safety case studies. Working with case studies is an effective tool to demonstrate the interlinkages of various road safety elements. Furthermore, we propose leaving the classroom and using live examples as a learning experience drawing on reality is definitely worth the time investment to engage participants. As a third possibility, we discuss the option of working with E-learning tools in combination with a classroom course. The SaferAfrica project has developed various E-learning modules concerning road safety issues that can provide a great general introduction to the subject. In the last chapter we emphasise the importance of evaluations and various techniques thereof. This manual does not provide detailed content for a road safety curriculum. A lot of documentation is already available on the various topics and expertise regarding road safety. A comprehensive list of references for further reading can be found at the end of the course. Additionally, extensive material can also be found on the SaferAfrica website: http://www.saferafrica.eu/ .
Ano: 2018
Autor(es): Sanon, C.; Morris, A.; Vieira Gomes, S.; Kluppels, L.
Keywords: Africa; learning outcomes; Safe System approach; education; curriculum; Road safety
|
Informações Científicas e Técnicas
Info
Audit de sécurité routière au projet de routes du réseau routier national Manuel dapplication
Ce document est la traduction en langue française du manuel destiné à appuyer la mise en oeuvre d'audits de sécurité routière au projet dinfrastructures routières du réseau routier national développé par le Laboratório Nacional de Engenharia Civil portugais. Le document est organisé en quatre sections. La première section présente la notion daudit de sécurité routière (ASR): un ensemble de procédures visant à intégrer, de manière explicite et formelle, les connaissances et informations sur la sécurité routière dans la planification et la conception de routes, afin datténuer les risques daccidents et de réduire leurs conséquences. Cette section présente également des informations sur la portée, le but et l'utilité des ASR dans la gestion de la sécurité routière tout au long du cycle de vie de l'infrastructure routière. Les principales compétences souhaitables pour le profil des auditeurs sont également décrites. Dans la seconde section, des recommandations sont formulées quant aux aspects techniques à prendre en compte dans la mise en oeuvre dun rapport daudit de sécurité routière, notamment en ce qui concerne linfluence de la route sur le risque daccident et aux fondements de bonnes pratiques. La troisième section est réservée aux aspects les plus directement liés aux procédures de mise en oeuvre des RSA, en particulier en ce qui concerne les rôles de chacune des parties prenantes. Enfin, dans la quatrième section, neuf listes de contrôle sont présentées, dont lutilisation est volontaires, ainsi que des exemples de résultats dASR en chacune des quatre phases du projet dinfrastructure routière. Ces listes de contrôle, figurant en annexe, concernent les aspects suivants: la phase des études préalables ; la phase des études davant-projet ; la phase des études de projet ; la phase immédiatement avant la mise en service ; les traversées dagglomération ; les intersections au contrôle par règle de priorité ou STOP; les intersections contrôlées par feux de circulation; les carrefours giratoires; et les échangeurs.
Ano: 2018
Autor(es): Cardoso, J. L.
Keywords: PT; La sécurité routière; Manuel; Audit; Projet routier
Info
Estado-da-arte sobre medidas de engenharia de segurança rodoviária em ambiente urbano e sobre modelos de estimativa da frequência de acidentes - Resultados do projecto IRUMS
O presente documento constitui o primeiro relatório referente à actividade desenvolvida pelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdade de Ciências e Tecnologias da Universidade de Coimbra (FCT/UC) no âmbito do projecto IRUMS Infra-estruturas Rodoviárias Urbanas Mais Seguras. Neste relatório apresenta-se o estado da prática corrente em medidas de engenharia de segurança rodoviária em ambientes urbanos e o estado da arte em modelos de estimativa da frequência de acidentes, elencando-se também variáveis potencialmente úteis para a estimação de volumes de tráfego de utentes rodoviários vulneráveis com especial incidência nos peões.
Ano: 2011
Número Páginas:
152pp.
Autor(es): Vieira Gomes, S.; Cardoso, J. L.; Carvalheira, C.; Picado Santos, L.
Editor: LNEC
Keywords: Previsão estatística; Modelo estatístico; Acidente rodoviário; Área urbana; Segurança rodoviária
Info
Método para intervenção na infra-estrutura rodoviária urbana para melhoria da segurança - Resultados do projecto IRUMS
O presente documento constitui o quinto relatório referente à actividade desenvolvida pelo Laboratório Nacional de Engenharia Civil (LNEC) e pela Faculdade de Ciências e Tecnologias da Universidade de Coimbra (FCT/UC) no âmbito do projecto IRUMS Infra-estruturas Rodoviárias Urbanas Mais Seguras, que se integra também num protocolo assinado com a Câmara Municipal de Lisboa. Neste relatório final do projecto apresentam-se o resumo e as principais conclusões do trabalho desenvolvido no que diz respeito ao estado da arte sobre medidas de engenharia de segurança rodoviária em ambiente urbano e sobre modelos de estimativa da frequência de acidentes; ao desenvolvimento de modelos de estimativa de frequência de acidentes nos arruamentos da cidade de Lisboa; e ao desenvolvimento de uma metodologia capaz de identificar as fragilidades da infraestrutura rodoviária em zona urbana que contribuam para a ocorrência de acidentes e que possam ser tratadas com o objectivo da redução da sinistralidade rodoviária. É ainda sumariada a tarefa de recolha de dados, dada a sua relevância para a concretização deste projecto.
Ano: 2011
Número Páginas:
51pp.
Autor(es): Vieira Gomes, S.; Cardoso, J. L.; Carvalheira, C.; Picado Santos, L.
Editor: LNEC
Keywords: Análise de dados; Modelo estatístico; Acidente rodoviário; Segurança rodoviária; Área urbana; Infra-estrutura rodoviária
Info
Accident prediction models for bidirectional data on portuguese motorways
The present document describes prediction models for accident, fatalities, serious injuries and killed and seriously injured victims, adjusted to bidirectional data of Portuguese motorway sections. The study was developed at Laboratório Nacional de Engenharia Civil (LNEC) in the scope of Workpackage 2 - Safety Impact Assessment and Accident Prediction Model of the RIPCORD-ISEREST project, carried out under the 6th European Framework Program. It covers the issues related to modeling accidents using the Negative Binomial model regressions as well as detailed diagnostic checks of the models obtained. The data used were collected over a five year period, ranging from 1999 to 2003. Several explanatory variables were measured concerning exposure, number of lanes, presence of an additional lane, lane widths, type and widths of the roads shoulders and medians; response variables include the number of accidents, killed and serious injuries, fatalities and serious injuries that occurred on the five year period. The data set was further divided into four subsets corresponding to all road sections whose variables with missing values were removed, road sections without missing values and the equivalent for road sections with values of the annual average daily traffic greater than 5000 vehicles. Models were fitted to the four data sets with the response variables consisting on the number of accidents, fatalities, serious injuries and killed and seriously injured victims. Statistical techniques of model selection and model checking, including deviance and likelihood ratio tests and the AIC procedure, as well as graphical methods, were intensively used as measures of goodnessof- fit.
Ano: 2009
Número Páginas:
153pp.
Autor(es): Lopes, S.; Cardoso, J. L.
Editor: LNEC
|
|
Outros
Info
Benchmarking road safety in Latin American countries
The main objective of the project was the benchmarking of road safety performances and developments of ten Latin American countries. The comparison allowed to identify the similarities and differences between countries, not only on the number of crashes and casualties, but also on the factors, circumstances and events that influence the risk of a crash and the severity of its outcome. The analysis was performed in the following areas
Ano: 2018
Autor(es): Vieira Gomes, S.; Feypell, V.; Wegman, F.
Keywords: Data collection; Latin America; Benchmarking; Road safety
Info
Document organisationnel du système de comptage. Document descriptif des besoins
Neste relatório é proposta a estrutura organizacional para realização das contagens tendentes ao recenseamento de tráfego rodoviário na rede de estradas interubanas da Argélia, incluindo o dimensionamento do parque de equipamento de contagem a usar, sua configuração (cntagens permanentes e temporárias), bem como a avaliação dos prazos de realização, em função da dimensão das equipas encarregadas da colocação e exploração dos equipamentos nos trechos da rede rodoviária.
Ano: 2017
Autor(es): Rème, A.; Courbon, T.; Robin, V.; Cardoso, J. L.
Keywords: Rede rodoviária; Tráfego rodoviário
Info
Transport Challenge in Horizon 2020. ECTRI suggestions for the third work programme (2018-2020) in the field of "Transport economics and policy"
The European Conference of Transport Research Institutes (ECTRI) is an international non?profit association that was officially founded in April 2003. It is the first attempt to unite the forces of the foremost multimodal transport research centres across Europe and to thereby promote the excellence of European transport research. Today, it includes 28 major transport research institutes or universities from 21 European countries. Together, they account for more than 4,000 European scientific and research staff in the field of transport. ECTRI as the leading European research association for sustainable and multimodal mobility is committed to provide the scientifically based competence, knowledge and advice to move towards a green, safe, efficient, and inclusive transport for people and goods. The objective of this Position Paper in the field of transport economics and policies is to contribute to the third work programme 2018-2020 of the European Commission, for inclusion in the upcoming calls of Horizon 2020, and in particular addressing the societal challenge aiming to achieve Smart, Green and Integrated Transport".
Ano: 2016
Autor(es): Arsénio, E.; Heddebaut, O.; Tuominen, A.
Keywords: Connected and automated transport; Socio-economic research; Low carbon transport; Behavioural research; Transport policies; Transport economics; Integrated transport; Green transport; Smart transport; Horizon 2020
Info
Assessment of intermodal freight transport costs
The research reported in this paper is part of the R&D project COST-TRENDs, funded by the Portuguese Foundation for Science and Technology. It presents a strategic assessment study of the hinterland connections centred in the Port of Sines, in Portugal, that integrates the core network corridor of the Trans-European Transport Network (TEN-T) designated as the Atlantic corridor. The study comprised the analysis of trends of maritime freight costs until 2020 and the assessment of alternative intermodal freight transport options to reduce costs along the multimodal transport chains. The options evaluated focused in the Iberian section of the Atlantic corridor and included the combination of maritime-short sea shipping, maritime-rail, maritime-road and, also, rail-air modes. The study estimated several key performance indicators for each option which aim to provide useful inputs to transport policy.
Ano: 2014
Número Páginas:
16pp.
Autor(es): Prata, J.; Arsénio, E.
Keywords: Freight transport costs; Co2 emissions; Climate change externalities; Intermodal freight transport
Info
How to Promote Sustainable Land-Use Changes Through Developing Intermodal High-Speed Railway Stations: a case study in Portugal
The literature shows that the development of the railway system in most European countries had a key role both in the evolution of urban systems and regional dynamics. On the other hand, it can be said that railway stations might act as important drivers for promoting sustainable land-use changes, namely of node and place functions which can be consistently balanced. The future Portuguese High-Speed Railway (HSR) network is considered as a major strategic transport scheme at both the Iberian and national levels. Its first stage comprises three routes. Of these, one links the Lisbon Metropolitan Area with the Spanish border of Badajoz, being an integral part of the HSR between both Iberian capitals, whereas the other two form the Atlantic Axis, encompassing a system of cities ranging from Lisbon to Porto, an from the latter point to Braga, Vigo and Coruña, concentrating nearly 80% of the whole Portuguese population, and serving an area generating about 90% of Portugals GDP. The Lisbon to Porto HSR line, hereafter designated as the Atlantic corridor, will be a 292 Km-long standard-gauge (1435 mm) one, supplementing an historic and congested 146-year old Iberian-gauge (1668mm) main line. The new HSR line is expected to open by 2017, and will feature a limited number of intermediate stations, enabling an easy interchange with other transport modes, namely with the broad-gauge conventional rail network. The future intermodal Leiria-AV HSR station, one of the four intermediate railway stations within the Lisbon Porto line, will be located between the neighbourhood of Leiria (circa 42785 inh. in 2004) and Marinha Grande (38599 inh. in 2008), in the industrial zone of Barosa, at around 120 km North of Lisbon Metropolitan Area (LMA). This new intermodal HSR station is expected to function as a major regional interchange, by providing access to various urban centres, with support on both the tangencial Western main railway line, the A8 North-South coastal motorway and the National Road linking Leiria and Marinha Grande. One can say that the foreseen centrality, which will be at 35 minutes travel time from LMA, will be an opportunity to integrate railway development, activity location and spatial planning both at the regional and local levels, aiming at sustainable patterns of development. The work presented in this paper is the first stage of a broader research project on the topic High Speed Railway in Portugal: impacts and intermodality within the Leiria region which covers a wide range of HSR impacts. The questions addressed in this research are as follows: o What are the potential territorial implications of the HSR network in the region of the Leiria-AV? o How to promote sustainable land use and transport changes using the new intermodal HSR station as a (local and regional) development anchor? o How to balance expected HSR impacts if the aim is to achieve both sustainable and healthier communities along with maximizing economic and other potential positive impacts? The research methodology will comprise two major steps: i) benchmarking exercise of other reference cities in Europe where HSR was already implemented, such that a list of potential impacts can be now anticipated for the case of the intermediate city of Leiria; ii) implementation of an attitudinal and stated choice survey to a representative sample of economic agents and other stakeholders that will assess individuals (local communities) and group (firms) perceptions regarding the impacts of the HSR project and specific intermodal scenarios set for promoting sustainable land use and transport mode changes; iii) the comparison of potential versus perceived impacts and preferred intermodal options. Overall research results are expected to contribute towards future policy formulation with respect to railway and land use developments both at the community and regional level aiming at achieving sustainable patterns of development. This paper is centred on the benchmarking exercise that comprised major reference cities where HSR were already implemented and on the preliminary results obtained from a stated choice (SC) survey administered to a sample of economics agents within Lisbon Metropolitan Area. This SC survey focused on the assessment of those potential territorial effects related to relocation of offices nearby the future Leiria AV HSR station. The remainder of this paper is organized as follows. Section 2 presents an overview of the HSR project in Portugal and the Leiria AV station in the context of the urban/regional network. Section 3 provides a discussion of the territorial impacts related to the HSR project considering a benchmarking exercise that included impacts observed at similar characteristics to Leiria and HSR connections. Subsequently, section 4 present a prospective analysis of those impacts for the Leiria region, including a stated-choice experiment which was implemented to a sample of firms in Lisbon to evaluate ex ante possible office relocation choices. Some prospective scenarios are then outlined. Finally, section 6 concludes and some further research directions can be drawn.
Ano: 2010
Número Páginas:
30p..
Autor(es): Arsénio, E.; Tao, M.; Ferreira, F.
Editor: PTRC, UK
Keywords: Stated-choice survey; Discrete choice models; Territorial impacts; Intermodality; High-speed rail
|