Papers
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion 
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Year: 2024
Number Pages:
1-15pp.
Author(s): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Year: 2024
Number Pages:
16p..
Author(s): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Numerical analysis of 3D hydrodynamics and performance of an array of oscillating water column wave energy converters integrated into a vertical breakwater
Performance and hydrodynamics of an array of Oscillating Water Column (OWC) Wave Energy Converter (WEC) integrated into a vertical breakwater is studied. The FLUENT® software, in which the numerical model is based on the Reynolds-Averaged Navier-Stokes equations and the Volume of Fluid method for free surface flow modeling, is used in a 3D numerical wave tank. Three vertical breakwater configurations subject to the action of incident regular waves with periods from 6 to 12 s are studied: normal breakwater, with vertical walls parallel to the direction along the breakwater length; and two novel breakwater geometries, partially and fully convergent breakwaters, whose converging vertical walls are inclined
Year: 2024
Number Pages:
20p..
Author(s): Didier, E.; Teixeira, P.
: Revista Renewable Energy
Editor: Elsevier
Volume:
Vol. 225 (120297).
Keywords: 3D RANS-VoF numerical wave tank; Efficiency; Vertical breakwater; Oscillating water column; Array of wave energy converters
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Year: 2023
Number Pages:
420
Author(s): Didier, E.; Teixeira, P.
: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
An Early Warning System for Coastal Risks Assessment
Storms impacting sandy coastal areas produce hazards such as erosion and overwash that, in turn, promote risk to life and property damage in occupied areas. Coastal damage and risks willincrease in the future not only in association with climate change but also due to the growinghuman occupation in coastal areas (van Dongeren et al., 2018). Since the threatened coastal areas are often densely populated, there is a need to implement measures to prevent risks. One of such measures is the use of Early Warning Systems (EWS) that anticipate expected risks and, therefore, work as management tools to minimize or avoid disaster. This work presents the basis of an EWS prototype to alert about the potential consequences of overwash/overtopping and erosion induced by storms, in coastal areas.
Year: 2023
Author(s): Ferreira, Ó.; Garzon, J.L.; Ferreira, A. M.; Zózimo, A. C.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.
Editor: World Scientific
Info
Conceptual and quantitative categorization of wave
Beaches combined with sloping structures are frequently the frst element of defense to protect urban areas from the impact of extreme coastal fooding events. However, these structures are rarely designed for null wave overtopping discharges, accepting that waves can pass above the crest and threat exposed elements in hinterland areas, such as pedestrians, urban elements and buildings, and vehicles. To reduce risks, Early Warning Systems (EWSs) can be used to anticipate and minimize the impacts of fooding episodes on those elements. A key aspect of these systems is the defnition of non-admissible discharge levels that trigger signifcant impacts. However, large discrepancies in defning these discharge levels and the associated impacts are found among the existing methods to assess foodings. Due to the lack of standardization, a new conceptual and quantitative four-level (from no-impact to high-impact) categorization of food warnings (EW-Coast) is proposed. EW-Coast integrates and unifes previous methods and builds on them by incorporating feld-based information. Thus, the new categorization successfully predicted the impact level on 70%, 82%, and 85% of the overtopping episodes afecting pedestrians, urban elements and buildings, and vehicles, respectively. This demonstrates its suitability to support EWSs in areas vulnerable to wave-induced fooding.
Year: 2023
Author(s): Garzon, J.L.; Ferreira, O.; Reis, M. T. L. G. V.; Ferreira, A. M.; Fortes, C. J. E. M.; Zózimo, A. C.
: Scientific Reports
Editor: Communications Engineering
Info
Damage Evolution in Physical Scale Model Tests of a Stretch of the Breakwater of Peniche Harbour.
During physical scale model tests of rubble mound breakwaters, the assessment of the eroded volume of the armour layer subjected to incident sea waves can be determined from consecutive surveys of the surface of the armour layer after each test run. This enables one to assess the damage level of the struc ture by comparing erosion profiles and by the eroded volume between consecutive surveys of the tested section. The present study aimed to evaluate the damage evolu tion of a section of the Peniche harbour west breakwater, whose armour layer is made of tetrapods, A dimensionless damage parameter was computed, based on the eroded volume at the end of each test. The test program consisted of three test series (A, B and C) with different durations and wave conditions sequences, considering the low-water level (water depth of 0.20 m at the toe of the structure) and high-water level (0.24 m) and sea states with peak periods Tp = 1.70 s and Tp = 1.98 s and significant wave heights, Hm0, ranging between 0.12 m and 0.19 m. The model was built and operated according to Froude
Year: 2023
Author(s): Lemos, R.; Fortes, C. J. E. M.; Santos, J. A.; Mendonça, A. C.
Editor: Rilem
Keywords: 3D surface model; Position sensor; Damage evolution; Breakwater
Info
Damage Evolution Prediction during 2D Scale-Model Tests of a Rubble-Mound Breakwater: A Case Study of Ericeira
Melby presents a formula to predict damage evolution in rubble-mound breakwaterswhose armour layer is made of rock, based on the erosion measured in scale-model tests and thecharacteristics of the incident sea waves in such tests. However, this formula is only valid for armourlayers made of rock and for the range of tested sea states. The present work aims to show howthe Melby methodology can be used to establish a similar formula for the armour layer damageevolution in a rubble-mound breakwater where tetrapods are employed. For that, a long-durationtest series is conducted with a 1:50 scale model of the quay section of the Ericeira Harbour breakwater.The eroded volume of the armour layer was measured using a Kinect position sensor. The damageparameter values measured in the experiments are lower than those predicted by the formulationfor rock armour layers. New ap and b coefficients for the Melby formula for the tested armour layerwere established based on the minimum root mean square error between the measured and thepredicted damage. This work shows also that it is possible to assess the damage evolution in scale model tests with rubble-mound breakwaters by computing the eroded volume and subsequently, thedimensionless damage parameter based on the equivalent removed armour units.
Year: 2023
Author(s): Lemos, R.; Santos, J. A.; Fortes, C. J. E. M.
: Modelling
Editor: MDPI
Keywords: Position sensor; Damage evolution; Rubble-mound breakwater
Info
Determination of Wave Run-Up Through the TimesTack Methology and hrough a Resistive Wave Gauge. a Comparative Analysis
The objective of this work is the comparison of two methodologies used for run-up measurements in a two-dimensional physical model, which represented the protection breakwaters of the Peniche and Ericeira
Year: 2023
Author(s): Lemos, R.; Fontes, R.; Fortes, C. J. E. M.; Andriolo, U.; Rito, J.
Editor: Reterm
Keywords: Breakwater; Physical model; RimeStack; Video analysis; Run-up
Info
Development of a Bayesian networks-based early warning system for wave-induced flooding
Coastal flooding prediction systems can be an efficient risk-reduction instrument. The goal of this study was to design, build, test, and implement a wave-induced flooding early warning system in urban areas fronted by sandy beaches. The system utilizes a novel approach that combines Bayesian Networks and numerical models (SWAN + XBeach) and was developed in two phases. In the development phase, firstly, the learning information was generated including the creation of oceanic conditions, modeling overtopping discharges, the haracterization of the associated im pacts (no, low, moderate and high) in pedestrians, urban components and buildings, and vehicles, and secondly, the Bayesian Networks were designed that surrogated the previously generated information. After their training, the conditional probability tables were created representing the foundation to make predictions in the operational phase. This methodology was validated for several historical events which hit the study area (Praia de Faro, Portugal), and the system correctly predicted the impact level of around 80% of the cases. Also, the predictive skills varied depending on the level, with the no and high impact levels overcoming the intermediate levels. In terms of efficiency, one simulation (deterministic) of coastal flooding for 72 h by running SWAN + XBeach operationally would take more than two days on a one-logical processor workstation, while the current approach can provide quasi-instantaneously predictions for that period, including probability distributions. Moreover, the two-working phase approach is very flexible enabling the inclusion of additional features such as social components representing a powerful tool for risk reduction in coastal communities.
Year: 2023
Number Pages:
19p..
Author(s): Garzon, J.L.; Ferreira, Ó.; Zózimo, A. C.; Fortes, C. J. E. M.; Ferreira, A. M.; Pinheiro, L.; Reis, M. T. L. G. V.
: International Journal of Disaster Risk Reduction
Editor: Elsevier
Volume:
Volume 96.
Keywords: Wave overtopping; Sandy beaches; Bayesian network; XBeach; Prediction system
|
Comunicação
Info
Renaturalização da zona do Lugar de Baixo, Madeira
O presente trabalho descreve a aplicação do modelo numérico COULWAVE ao estudo da propagação de ondas na zona da Praia do Lugar de Baixo, Madeira, com vista a simular as características hidrodinâmicas na zona de estudo permitindo analisar as alturas de ondas, zona de rebentação e reflexão da onda junto à costa. O objetivo final é propor soluções para a renaturalização desta zona e o melhoramento das condições de surf.
Year: 2018
Number Pages:
226-229pp.
Author(s): Castro, J.; Mendonça, A. C.; Fortes, C. J. E. M.
Editor: Instituto Hidrográfico
Keywords: Reflexão; Rebentação; COULWAVE; Madeira; Surf
Info
Survey of a three-dimensional scale model of a rubble-mound breakwater using different 3D surface modelling techniques
The objective of this paper is to describe and compare the use of different high-resolution survey techniques to create and analyse 3D surface models made up of point clouds, using open-source and freeware post-processing tools. Within this framework, several tests were conducted on a three-dimensional scale model of a breakwater, with surveys performed by a smartphone, the Microsoft® Kinect® sensor and a UAV camera. All the tests were conducted for a physical model placed in an empty wave tank. For this comparison, a number of post-processing software were used: the Microsoft Kinect Fusion Application, Visual SFM and MicMac, all freeware software. The clouds of points were compared using the CloudCompare freeware software and the Golden Software Surfer commercial software.In order to obtain a clear comparison between these tools (i.e., to better evaluate accuracy and associated errors), all the point clouds (with RGB colour information) were aligned with data coming from a survey used to coordinate some points in the model (Ground Control Points). All the clouds were compared with a corrected cloud based upon coordinated points painted on the concrete floor of the wave tank.The specific experimental conditions needed for using each of these methodologies were investigated and classified.
Year: 2018
Number Pages:
10p.
Author(s): Lemos, R.; Henriques, M. J.; Capitão, R.; Fortes, C. J. E. M.; Jónatas, R.; Silva, H.
Editor: IHCantabria
Keywords: 3D surface models; Kinect sensor; Photogrammetric techniques; Damage evolution
Info
SWAMS: Novos desenvolvimentos
Nesta comunicação apresenta-se os novos desenvolvimentos que estão em curso no sistema SWAMS ALERT, que é um sistema previsão, alerta e avaliação de risco de eventos perigosos associados à navegação em áreas portuárias e ao comportamento dos navios amarrados.O sistema usa as características da agitação marítima previstas para determinar os seus efeitos em termos de forças em amarras e defensas, bem como de movimentos de um navio amarrado. Para isso, o sistema utiliza um conjunto de modelos numéricos. O sistema consiste em quatro módulos: I - Características da agitação marítima; II - Navegação em áreas portuárias; III - Avaliação de Risco e IV - Sistema de Alerta. A interface do sistema é através de uma plataforma web totalmente interativa e amigável.Ilustra-se a aplicação deste sistema ao porto da Praia da Vitória.
Year: 2018
Number Pages:
95-98pp.
Author(s): Pinheiro, L.; Lopes, P.; Poseiro, P.; Fortes, C. J. E. M.; Santos, J. A.
Editor: Instituto Hidrográfico
Keywords: Sistema de alerta; Previsão em tempo real; Navegação
Info
Systematic observation of maritime works. The new OSOM+
This paper presents recent new features of the Systematic Observation of Maritime Works (OSOM+) program, under development at LNEC since 1986, for using in an extensive number of maritime structures of mainland Portugal. Those functionalities are illustrated with applications to a real case scenario (the port of Ericeira) and by indicating their added-value on the existing methodology.
Year: 2018
Number Pages:
466-469pp.
Author(s): Capitão, R.; Lemos, R.; Henriques, M. J.; Fortes, C. J. E. M.; Neves, M. G.; Silva, L. G.; Reis, M. T. L. G. V.
Editor: Instituto Hidrográfico
Keywords: Drones; VANT; Serial surveys; Maritime works; Systematic observation
Info
The
It is common for the local sea state in coastal waters to be a complex combination of waves due to local and recent wind (the "sea") and long period waves resulting from earlier weather systems, which have travelled many 100s of km with little attenuation of these very long waves (the "swell"). Sea and swell may have very different directions and periods.
Year: 2018
Author(s): Bruce, T.; Franco, L.; Romano, A.; Menendez, M.; Reis, M. T. L. G. V.; Pinheiro, L.; Van der Meer, J.
Keywords: Overtopping; Bimodal wave; Crossover project
Info
A 3D RANS-VOF wave tank for oscillating water column device studies
This paper presents the validation of a wave maker with active absorption method implemented in FLUENT® RANS-VOF code for modelling long time series of waves propagating and interacting with coastal structures, more specifically, with Oscillating Water Column devices, to cancel out the reflected wave that reaches the wave maker. Verification of the numerical technique was performed in a 3D wave tank in which a technique of multiple active absorption wave makers was used. Good results were obtained in quasi-3D and fully-3D applications showing that active absorption should be used for modelling accurately the complex interaction between wave and coastal structures, in the present case, with an oscillating water column device integrated in a vertical breakwater.
Year: 2017
Number Pages:
710-721pp.
Author(s): Teixeira, P.; Didier, E.; Neves, M. G.
Editor: CIMNE
Keywords: Wave dynamic absorption; RANS-VOF; Numerical modelling; Oscillating water column
Info
A web platform for the systematic monitoring of coastal structures
Due to both its geographic location and maritime importance, Portugal is equipped with a large number of port infrastructures, the majority of which built for goals such as to guarantee the tranquility of the sheltered areas of the harbour basins, to help controlling sedimentation by guiding the currents, to protect water taken from thermoelectric plants, amongst others. In Portugal, the most common of these structures is the rubblemound breakwater. Due to its characteristics, maintenance or repair works are common throughout its lifetime. However, the need for these repair works should be evaluated in advance, in order to avoid significant costs associated to those works or, even worse, the collapse of the structure. It is therefore quite important to evaluate the Present Condition of the structure, as well its Evolution and Risk Conditions. The Present Condition is periodically checked on-site and all relevant data gathered is recorded, by filling in inspection forms, in order to perform further comparisons and analyses with previous inspections of the structure, as to eventually characterize Evolution and Risk conditions. To expedite all this process and prevent likely occurrence of errors in data collection, a monitoring tool, supported through a map-based online geographic information system (WebGIS) was developed, enabling the georeferencing of the structures concerned. This system adapts to the location of the user
Year: 2017
Number Pages:
102-111pp..
Author(s): Maia, A.; Rodrigues, A.; Lemos, R.; Capitão, R.; Fortes, C. J. E. M.
Editor: SCITEPRESS
Keywords: Mobile devices; Georeferencing; Adaptation; Risk assessment; Coastal structures; Geographic information system
Info
Air injection effect on wave propagation: experimental modelling
The air entrainment effect on wave breaking is of the highest importance for the wave energy dissipation. Wave breaking is a complex phenomenon with several physical processes, making it difficult to quantify the contribution of the air in the energy dissipation process. This study presents a different approach where the wave propagation is exposed to air injected in the bottom of a wave flume. The experiment allows studying in a controlled environment the direct effect of the air bubbles in the wave propagation. The measurements show the free surface elevations and velocity profiles at two sections of the wave flume. The turbulence effect of the air injection on the wave propagation was evaluated. The results show differences for the three types of air injection that were tested. The air injection rate of each orifice is an important factor for the wave dissipation. The wave heights were found to decrease due to the air injection. The Turbulent Kinetic Energy shows an increase along the water column and on the downstream direction of the flume.
Year: 2017
Number Pages:
11p.
Author(s): Neves, D. R.; Pires Silva, A.; Siebring, A.; Fortes, C. J. E. M.; Matos, J.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Wave dissipation; Wave flume; Turbulence; Wave propagation; Air bubbles
Info
Análise de imagem para estudo do emulsionamento de ar na rebentação de onda
Apresenta-se nesta comunicação uma técnica baseada em análise de imagem para a medição e caraterização da concentração de ar produzida no processo de rebentação de onda. Para este efeito, realizaram-se filmagens dos ensaios num canal de ondas no Laboratório Nacional de Engenharia Civil (LNEC), que reproduzem dois tipos de rebentação de onda, progressiva e mergulhante. A validação da técnica de análise de imagem é feita por dois métodos, o primeiro com recurso à injeção de bolhas de ar através de uma bomba de ar e o segundo com a medição pontual da concentração de ar com uma sonda de deteção de bolhas de ar. Os resultados, relativos aos dois tipos de rebentação de onda, mostram as concentrações de ar e a distribuição da pluma de bolhas de ar. As medições realizadas permitem quantificar e caracterizar o ar emulsionado no processo de rebentação de onda.
Year: 2017
Number Pages:
18p.
Author(s): Neves, D. R.; Pires Silva, A.; Fortes, C. J. E. M.; Matos, J.
Editor: PIANC
Keywords: Emulsionamento de ar; Rebentação de onda; Modelação física; Canal de ondas; Análise de imagem
Info
Análise hidrodinámica de um dispositivo de coluna de água oscilante near-shore usando um modelo RANS-VOF 3D
Um dispositivo de aproveitamento da energia das ondas de tipo coluna de água oscilante (CAO) near-shore (que pode se assimilar a um cilindro vertical oco com a sua parte inferior aberta e a parte superior equipada com uma turbina Wells) implementada em profundidade intermédia pequena é estudado numericamente recorrendo a um modelo RANS-VOF 3D. O modelo numérico integra técnicas de geração e absorção das ondas por batedores múltiplos que permite dispor de um tanque de onda eficiente, eliminando as ondas reflectidas e difractadas. O dispositivo de CAO near-shore é um dispositivo alternativo ao clássico dispositivo integrado em quebra-mar ou na linha de costa e ao dispositivo off-shore (assimilado a um cilindro vertical oco estabilizado por um sistema de ancoragem por cabos) e tem duas vantagens: a resposta do dispositivo é independente da direcção das ondas e pode ser facilmente afundado no fundo do mar já que o dispositivo é desenhado para ser implementado em profundida pequena (~20 m). No entanto, a proximidade do fundo e a interacção complexa onda-estrutura resultante podem interferir em termo hidrodinâmico e energético na resposta do dispositivo CAO near-shore, comparativamente a um dispositivo off-shore. O artigo apresenta os primeiros resultados deste projecto através da análise pormenorizada de um caso de agitação marítima. Também, permite evidenciar e prever respostas diferentes do dispositivo CAO near-shore de um dispositivo clássico off-shore através da analise das series temporais de elevação de superfície livre, do caudal na turbina, da pressão na câmara-de-ar da CAO, da potência pneumática e dos vectores e campos de velocidade e de vorticidade ao redor e dentro do dispositivo.
Year: 2017
Number Pages:
10p.
Author(s): Didier, E.; Teixeira, P.; Neves, M. G.
Editor: Faculdade de Ciências e Tecnologia. Universidade Nova de Lisboa
Keywords: Near-shore; RANS-VOF; Modelação numérica; Coluna de água oscilante
|
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
|
Relatório Científico
Info
Projecto Sahy. Análise dos problemas hidráulicos.
N/A
Year: 1990
Author(s): Vicente, C.; Marcos Rita, M.
Info
Aeroporto Internacional de Macau. Estudos de agitação marítima. Relatório 2.3 - Tratamento estatístico de dados observados de 1984 a 1989.
N/A
Year: 1990
Author(s): Carvalho, M. M.
Info
Aeroporto Internacional de Macau. Extrapolação de níveis do mar. Actualização de resultados.
N/A
Year: 1990
Author(s): Carvalho, M. M.
Info
Aeroporto Internacional de Macau. Estudos preliminares de agitação marítima.
N/A
Year: 1989
Author(s): Covas, J. A.
Info
Aeroporto internacional de Macau. Estudos preliminares de agitação marítima.
N/A
Year: 1989
Author(s): Covas, J. A.
Info
Ensaios de estabilidade e galgamentos das obras de valorização da orla marítima de Ponta Delgada.
N/A
Year: 1989
Author(s): Silva, L. G.
Info
Ensaios de estabilidade e galgamentos das obras marítimas do porto das Lajes (Ilha das Flores).
N/A
Year: 1989
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido da protecção dos terraplenos do Hotel Vila-Lido (Funchal).
N/A
Year: 1989
Author(s): Silva, L. G.
Info
Eventual fusão NET/NPP.
N/A
Year: 1989
Author(s): Carvalho, M. M.; Vicente, C.; Marcos Rita, M.; Oliveira, E. M.
Info
Modelo matemático de cálculo das características da agitação marítima gerada pelo vento (método de Sverdrup-Munk-Bretschneider). Programa SMB84 (baseado na edição de "Shore Protection Manual" de 1984)
N/A
Year: 1989
Author(s): Covas, J. A.; Fortes, C. J. E. M.
|
|
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|
Hydraulics and Environment Department
