Papers
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Year: 2024
Number Pages:
1-15pp.
Author(s): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Year: 2024
Number Pages:
16p..
Author(s): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Numerical analysis of 3D hydrodynamics and performance of an array of oscillating water column wave energy converters integrated into a vertical breakwater
Performance and hydrodynamics of an array of Oscillating Water Column (OWC) Wave Energy Converter (WEC) integrated into a vertical breakwater is studied. The FLUENT® software, in which the numerical model is based on the Reynolds-Averaged Navier-Stokes equations and the Volume of Fluid method for free surface flow modeling, is used in a 3D numerical wave tank. Three vertical breakwater configurations subject to the action of incident regular waves with periods from 6 to 12 s are studied: normal breakwater, with vertical walls parallel to the direction along the breakwater length; and two novel breakwater geometries, partially and fully convergent breakwaters, whose converging vertical walls are inclined
Year: 2024
Number Pages:
20p..
Author(s): Didier, E.; Teixeira, P.
: Revista Renewable Energy
Editor: Elsevier
Volume:
Vol. 225 (120297).
Keywords: 3D RANS-VoF numerical wave tank; Efficiency; Vertical breakwater; Oscillating water column; Array of wave energy converters
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Year: 2023
Number Pages:
420
Author(s): Didier, E.; Teixeira, P.
: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
An Early Warning System for Coastal Risks Assessment
Storms impacting sandy coastal areas produce hazards such as erosion and overwash that, in turn, promote risk to life and property damage in occupied areas. Coastal damage and risks willincrease in the future not only in association with climate change but also due to the growinghuman occupation in coastal areas (van Dongeren et al., 2018). Since the threatened coastal areas are often densely populated, there is a need to implement measures to prevent risks. One of such measures is the use of Early Warning Systems (EWS) that anticipate expected risks and, therefore, work as management tools to minimize or avoid disaster. This work presents the basis of an EWS prototype to alert about the potential consequences of overwash/overtopping and erosion induced by storms, in coastal areas.
Year: 2023
Author(s): Ferreira, Ó.; Garzon, J.L.; Ferreira, A. M.; Zózimo, A. C.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.
Editor: World Scientific
Info
Conceptual and quantitative categorization of wave
Beaches combined with sloping structures are frequently the frst element of defense to protect urban areas from the impact of extreme coastal fooding events. However, these structures are rarely designed for null wave overtopping discharges, accepting that waves can pass above the crest and threat exposed elements in hinterland areas, such as pedestrians, urban elements and buildings, and vehicles. To reduce risks, Early Warning Systems (EWSs) can be used to anticipate and minimize the impacts of fooding episodes on those elements. A key aspect of these systems is the defnition of non-admissible discharge levels that trigger signifcant impacts. However, large discrepancies in defning these discharge levels and the associated impacts are found among the existing methods to assess foodings. Due to the lack of standardization, a new conceptual and quantitative four-level (from no-impact to high-impact) categorization of food warnings (EW-Coast) is proposed. EW-Coast integrates and unifes previous methods and builds on them by incorporating feld-based information. Thus, the new categorization successfully predicted the impact level on 70%, 82%, and 85% of the overtopping episodes afecting pedestrians, urban elements and buildings, and vehicles, respectively. This demonstrates its suitability to support EWSs in areas vulnerable to wave-induced fooding.
Year: 2023
Author(s): Garzon, J.L.; Ferreira, O.; Reis, M. T. L. G. V.; Ferreira, A. M.; Fortes, C. J. E. M.; Zózimo, A. C.
: Scientific Reports
Editor: Communications Engineering
Info
Damage Evolution in Physical Scale Model Tests of a Stretch of the Breakwater of Peniche Harbour.
During physical scale model tests of rubble mound breakwaters, the assessment of the eroded volume of the armour layer subjected to incident sea waves can be determined from consecutive surveys of the surface of the armour layer after each test run. This enables one to assess the damage level of the struc ture by comparing erosion profiles and by the eroded volume between consecutive surveys of the tested section. The present study aimed to evaluate the damage evolu tion of a section of the Peniche harbour west breakwater, whose armour layer is made of tetrapods, A dimensionless damage parameter was computed, based on the eroded volume at the end of each test. The test program consisted of three test series (A, B and C) with different durations and wave conditions sequences, considering the low-water level (water depth of 0.20 m at the toe of the structure) and high-water level (0.24 m) and sea states with peak periods Tp = 1.70 s and Tp = 1.98 s and significant wave heights, Hm0, ranging between 0.12 m and 0.19 m. The model was built and operated according to Froude
Year: 2023
Author(s): Lemos, R.; Fortes, C. J. E. M.; Santos, J. A.; Mendonça, A. C.
Editor: Rilem
Keywords: 3D surface model; Position sensor; Damage evolution; Breakwater
Info
Damage Evolution Prediction during 2D Scale-Model Tests of a Rubble-Mound Breakwater: A Case Study of Ericeira
Melby presents a formula to predict damage evolution in rubble-mound breakwaterswhose armour layer is made of rock, based on the erosion measured in scale-model tests and thecharacteristics of the incident sea waves in such tests. However, this formula is only valid for armourlayers made of rock and for the range of tested sea states. The present work aims to show howthe Melby methodology can be used to establish a similar formula for the armour layer damageevolution in a rubble-mound breakwater where tetrapods are employed. For that, a long-durationtest series is conducted with a 1:50 scale model of the quay section of the Ericeira Harbour breakwater.The eroded volume of the armour layer was measured using a Kinect position sensor. The damageparameter values measured in the experiments are lower than those predicted by the formulationfor rock armour layers. New ap and b coefficients for the Melby formula for the tested armour layerwere established based on the minimum root mean square error between the measured and thepredicted damage. This work shows also that it is possible to assess the damage evolution in scale model tests with rubble-mound breakwaters by computing the eroded volume and subsequently, thedimensionless damage parameter based on the equivalent removed armour units.
Year: 2023
Author(s): Lemos, R.; Santos, J. A.; Fortes, C. J. E. M.
: Modelling
Editor: MDPI
Keywords: Position sensor; Damage evolution; Rubble-mound breakwater
Info
Determination of Wave Run-Up Through the TimesTack Methology and hrough a Resistive Wave Gauge. a Comparative Analysis
The objective of this work is the comparison of two methodologies used for run-up measurements in a two-dimensional physical model, which represented the protection breakwaters of the Peniche and Ericeira
Year: 2023
Author(s): Lemos, R.; Fontes, R.; Fortes, C. J. E. M.; Andriolo, U.; Rito, J.
Editor: Reterm
Keywords: Breakwater; Physical model; RimeStack; Video analysis; Run-up
Info
Development of a Bayesian networks-based early warning system for wave-induced flooding
Coastal flooding prediction systems can be an efficient risk-reduction instrument. The goal of this study was to design, build, test, and implement a wave-induced flooding early warning system in urban areas fronted by sandy beaches. The system utilizes a novel approach that combines Bayesian Networks and numerical models (SWAN + XBeach) and was developed in two phases. In the development phase, firstly, the learning information was generated including the creation of oceanic conditions, modeling overtopping discharges, the haracterization of the associated im pacts (no, low, moderate and high) in pedestrians, urban components and buildings, and vehicles, and secondly, the Bayesian Networks were designed that surrogated the previously generated information. After their training, the conditional probability tables were created representing the foundation to make predictions in the operational phase. This methodology was validated for several historical events which hit the study area (Praia de Faro, Portugal), and the system correctly predicted the impact level of around 80% of the cases. Also, the predictive skills varied depending on the level, with the no and high impact levels overcoming the intermediate levels. In terms of efficiency, one simulation (deterministic) of coastal flooding for 72 h by running SWAN + XBeach operationally would take more than two days on a one-logical processor workstation, while the current approach can provide quasi-instantaneously predictions for that period, including probability distributions. Moreover, the two-working phase approach is very flexible enabling the inclusion of additional features such as social components representing a powerful tool for risk reduction in coastal communities.
Year: 2023
Number Pages:
19p..
Author(s): Garzon, J.L.; Ferreira, Ó.; Zózimo, A. C.; Fortes, C. J. E. M.; Ferreira, A. M.; Pinheiro, L.; Reis, M. T. L. G. V.
: International Journal of Disaster Risk Reduction
Editor: Elsevier
Volume:
Volume 96.
Keywords: Wave overtopping; Sandy beaches; Bayesian network; XBeach; Prediction system
|
Comunicação
Info
Sistema de alerta para a navegação em portos
Nesta comunicação, descreve-se um sistema de previsão e alerta baseado na avaliação do risco associado e ao comportamento de navios em manobra ou amarrados em zonas portuárias. Trata-se de uma extensão do HIDRALERTA (associado aos fenómenos de galgamentos oceânicos e inundações em zonas costeiras e portuárias), e tal como este, tem como ideia-base a utilização de previsões da agitação marítima (a 72 horas) para calcular os seus efeitos, neste caso, sobre os navios, quer nas manobras de aproximação ao porto quer quando se encontram acostados no interior deste. O sistema está a ser implementado numa plataforma Web e é constituído por 4 módulos: Características da Agitação Marítima; Navegação em zonas portuárias; Avaliação do risco e Sistema de Alerta. O porto da Praia da Vitória constitui a primeira aplicação prática do sistema e ilustra as suas potencialidades.
Year: 2016
Number Pages:
91-94pp.
Author(s): Pinheiro, L.; Lopes, P.; Fortes, C. J. E. M.; Santos, J. A.; Poseiro, P.; Reis, M. T.
Editor: Instituto Hidrográfico
Keywords: Sistema de alerta; Previsão em tempo real; Navegação
Info
Sistema de alerta para a navegação no porto de praia da Vitória
Nesta comunicação, descreve-se o sistema SWAMS_ALERTA que é um sistema deprevisão e alerta baseado na avaliação do risco associado à navegação em zonas portuáriase ao comportamento de navios amarrados em zonas portuárias. O sistema baseia-se nosistema HIDRALERTA (associado aos fenómenos de galgamentos oceânicos e inundaçõesem zonas costeiras e portuárias), e tal como este, tem como ideia-base a utilização deprevisões da agitação marítima (a 72 horas) para calcular os seus efeitos, neste caso, sobreos navios, quer nas manobras de aproximação ao porto quer quando se encontra acostado nointerior deste.O sistema modular é constituído por 4 módulos: I
Year: 2016
Number Pages:
15p.
Author(s): Pinheiro, L.; Lopes, P.; Fortes, C. J. E. M.; Poseiro, P.; Santos, J. A.
Editor: APRH
Keywords: Sistemas de informação geográfica; Sistema de alerta; Previsão em tempo real; Navegação
Info
Tanque de ondas numérico 3d para estudos de engenharia costeira
O objectivo principal deste artigo é implementar condições de fronteiras específicas num modelo URANS-VOF 3D (Unsteady Reynolds-Average-Navier-Stokes
Year: 2016
Number Pages:
1-10pp.
Author(s): Didier, E.; Teixeira, P.; Neves, M. G.
Editor: Universidade Federal do Rio Grande (FURG)
Keywords: Batedores múltiplos com absorção activa; Tanque 3D; Absorção activa; Modelo RANS-VOF
Info
Toe berm damage progression analysis using a stereophotogrammetric survey technique
This paper focuses the toe berm damage progression analysis using image processing tools, in order to test their applicability to scale model tests. Damage can be characterized either by counting the number of displaced units or by measuring the eroded profile of the armor slope. Nevertheless, qualitative and quantitative damage assessment is not always easy. In order to ease and speed up those tasks, some image processing tools are applied in this study. In this work, damage was accessed using the displaced armor units counting method. A stereophotogrammetric method for profile survey was used to analyze profile eroded areas during test series. An image compare tool was alsp implemented and advantages and limitations of these techniques were evaluated. These techniques were applied ia scale model tests of Praia da Vitória harbor South breakwater, aiming to quantify the cross-section damage progression.
Year: 2016
Number Pages:
349-360pp.
Author(s): Pedro, F.; Bastos, M.; Lemos, R.; Fortes, C. J. E. M.; Santos, J. A.
Editor: EdiBios
Keywords: Stereophotogrammetric survey; Damage progression; Breakwater
Info
Travel distance of wave overtopping at a rubble mound breakwater with a recurved wall: comparison between physical modelling and empirical formulas
The evaluation of the travel distance of wave overtopping behind coastal structures is very important for estimating the damaging impacts. Usually, these calculations can be performed by applying empirical formulas but they are limited to the wave/water level conditions and structure characteristics for which they were developed.This paper describes the application of existing formulas to a cross-section of the south breakwater of Praia da Vitória port (Terceira island, Azores, Portugal), which is protected by a recurved wave return wall.Results from physical model tests performed at LNEC are used to test, validate and calibrate those formulas. The formula that provided the best fit to the measured travel distances was developed by Besley (1999) but discrepancies were still considerable. Following a sensitivity analysis on the empirical parameters, new parameter values were suggested, as well as adjusted Besley (1999) and Lykke Andersen et al. (2009) formulas, which improved significantly the agreement with the new physical model data.
Year: 2016
Number Pages:
481-484pp.
Author(s): Poseiro, P.; Reis, M. T.; Fortes, C. J. E. M.; Garcia, T.
Editor: Instituto Hidrográfico
Keywords: Wave overtopping; Praia da Vitória; Port structures; Empirical formulas; Physical modelling; Travel distance
Info
Warning system for navigation and moored ships in ports
This paper describes the SWAMS ALERT system, a forecast, warning and risk assessment system associated with navigation and mooring of ships in port areas. This system is based on HYDRALERTA, a previously developed system for overtopping and flooding in coastal and port areas. The basic idea is to use 72-hour sea waves
Year: 2016
Number Pages:
502-511pp.
Author(s): Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Lopes, P.; Poseiro, P.
Editor: Universidade Federal do Rio Grande (FURG)
Keywords: Praia da Vitória; Warning system; Ship
Info
Wave energy at Azores islands
This paper focus on the sea wave characterization (significant wave height, peak wave period, mean wave period, mean wave direction) at the Azores archipelago and the evaluation of the wave energy source. For the sea wave characterization, the numerical mode! SWAN, is applied for a period of 10 years in several points around each of the nine islands of Azores, at the 100 m CD bathymetric. Based on those results, average wave power maps considering whole 10 year period or the winter and the summer periods are constructed. An average sea wave climate is also presented. Moreover, sea wave characterization is also made for Porto Cachorro at Pico island, where a power pIant is constructed since 1990.
Year: 2016
Number Pages:
243-254pp.
Author(s): Matos, A.; Madeira, F.; Fortes, C. J. E. M.; Didier, E.; Poseiro, P.; Jacob, J.
Editor: EdiBios
Keywords: Oscillating water column; Azores islands; Wave energy
Info
Avaliação do impacto económico dos galgamentos e inundação no porto da praia da Vitória
A avaliação quantitativa do risco de galgamentos, e correspondente inundação, em termos de custos associados aos danos causados por estes fenómenos é de grande relevância. Com efeito, tal dotará as autoridades competentes de uma informação fulcral para o planeamento a médio e longo prazo de intervenções mitigadoras do risco.Nesta comunicação, apresenta-se a aplicação da simulação de Monte Carlo ao porto da Praia da Vitória para a análise da incerteza das variáveis que influenciam o valor dos prejuízos causados pela ocorrência de galgamentos e inundação nesta zona portuária.A metodologia consiste na definição de um conjunto de variáveis aleatórias, tais como: o caudal médio galgado, a área atingida pelo galgamento, o valor e o número de bens em risco e o dano causado nos bens. A cada uma destas variáveis faz-se corresponder uma distribuição de probabilidade, procede-se à geração de uma amostra de valores aleatórios, aplica-se o modelo para cálculo do prejuízo associado ao galgamento utilizando as combinações geradas pelas variáveis aleatórias e, por fim, analisam-se os resultados para avaliação da incerteza nos mesmos. Com vista a simplificar a aplicação do modelo, esta foi dividida em 3 estágios, sendo o primeiro apenas para a geração da distribuição do caudal médio galgado condicionado ao nível da altura significativa do estado de agitação incidente na estrutura, o segundo para a determinação da distribuição correspondente ao custo condicionado ao mesmo nível e o terceiro para a obtenção da distribuição para o risco. A probabilidade de excedência de cada um dos níveis referidos é determinada, com base nos últimos 30 anos de previsões da agitação marítima obtidas nesta zona. Os caudais médios galgados sobre uma estrutura portuária são obtidos com recurso à ferramenta neuronal NN_OVERTOPPING2. Os restantes parâmetros foram definidos empiricamente apenas com o intuito de demonstrar o modelo.
Year: 2015
Number Pages:
15p.
Author(s): Poseiro, P.; Santos, J. A.; Fortes, C. J. E. M.; Reis, M. T.
Editor: Carlos Coelho et al. Associação Portuguesa de Recursos Hídricos, 2015
Keywords: Simulação de Monte Carlo; Risco; Porto da Praia Vitória; NN_OVERTOPPING2; Inundação; Galgamentos
Info
Coastal risk forecast system
Runnup and overtopping are the two main sea wave originated events that threat coastal structures. Theseevents may cause destruction of property and the environment, and endanger people. To build early warning forecast systems, we must take into account the consequence and risk characterization of the events in the affected area, and understand how these two types of spatial information integrate with sensor data sources and the risk determination methodology. In this paper we present the description and relationship between consequence and risk maps, their role on the risk calculation, and how the HIDRALERTA project integrates both aspects into its risk methodology. We present a case study for Praia da Vitória port, in Azores Portugal.
Year: 2015
Number Pages:
201-209pp..
Author(s): Sabino, A.; Rodrigues, A.; Poseiro, P.; Reis, M. T.; Fortes, C. J. E. M.; Reis, R.
Editor: SCITEPRESS
Keywords: Geographic information systems.; Consequence and risk maps,; Early warning,; Risk management,
Info
Development of an integrated tool for numerical modelling of OWC-WECs in vertical breakwaters
This paper describes the advances on the research project DITOWEC
Year: 2015
Number Pages:
186-195pp.
Author(s): Reis, M. T.; Didier, E.; Dias, J.; Mendonça, A. C.; Conde, J. M.; Neves, M. G.; Fortes, C. J. E. M.; Teixeira, P.
Keywords: Pico, azores; Wave energy converters; Oscillating water column; Prototype data; Physical modelling; Numerical modelling
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
An integrated harbour navigation control system. NATO Po-Navigation. Adenda ao "Project Plan" proposto ao "Programa Ciência para a Estabilidade. Fase III" da OTAN
N/A
Year: 1994
Author(s): Covas, J. A.
Info
Cais da Calheta, Ilha de S. Jorge - Açores. Memorando
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios em modelo reduzido de uma protecção marítima aderente.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Ensaios tridimensionais de estabilidade e galgamentos do molhe de protecção do porto de recreio náutico do porto de Sines.
N/A
Year: 1994
Author(s): Silva, L. G.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Análise das condições do porto de Sines. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Estudo da localização de um terminal de importação de gás natural liquefeito. Selecção de locais viáveis. Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Capitão, R.
Info
Ligação da lagoa de Óbidos ao mar - Estudos de agitação marítima.
N/A
Year: 1994
Author(s): Carvalho, M. M.; Capitão, R.; Fortes, C. J. E. M.; Covas, J. A.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Coimbra.
N/A
Year: 1994
Author(s): Covas, J. A.; Fortes, C. J. E. M.; Capitão, R.
Info
Modelação por elementos finitos da propagação e deformação de ondas marítimas em zonas costeiras. Missão a Palma de Maiorca.
N/A
Year: 1994
Author(s): Covas, J. A.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|