Papers
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion 
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Year: 2024
Number Pages:
1-15pp.
Author(s): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Year: 2024
Number Pages:
16p..
Author(s): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Numerical analysis of 3D hydrodynamics and performance of an array of oscillating water column wave energy converters integrated into a vertical breakwater
Performance and hydrodynamics of an array of Oscillating Water Column (OWC) Wave Energy Converter (WEC) integrated into a vertical breakwater is studied. The FLUENT® software, in which the numerical model is based on the Reynolds-Averaged Navier-Stokes equations and the Volume of Fluid method for free surface flow modeling, is used in a 3D numerical wave tank. Three vertical breakwater configurations subject to the action of incident regular waves with periods from 6 to 12 s are studied: normal breakwater, with vertical walls parallel to the direction along the breakwater length; and two novel breakwater geometries, partially and fully convergent breakwaters, whose converging vertical walls are inclined
Year: 2024
Number Pages:
20p..
Author(s): Didier, E.; Teixeira, P.
: Revista Renewable Energy
Editor: Elsevier
Volume:
Vol. 225 (120297).
Keywords: 3D RANS-VoF numerical wave tank; Efficiency; Vertical breakwater; Oscillating water column; Array of wave energy converters
Info
A RANS-based Numerical Model to Simulate Overtopping-type Wave Energy Converters Integrated into Breakwaters
This study aims to validate a numerical model based on Reynolds-averaged Navier
Year: 2023
Number Pages:
420
Author(s): Didier, E.; Teixeira, P.
: International Journal of Offshore and Polar Engineering
Editor: IJOPE
Volume:
Vol 33 Nº 4.
Keywords: Turbulence models; Numerical wave flume; RANS; Wave energy; Overtopping wave energy converter
Info
An Early Warning System for Coastal Risks Assessment
Storms impacting sandy coastal areas produce hazards such as erosion and overwash that, in turn, promote risk to life and property damage in occupied areas. Coastal damage and risks willincrease in the future not only in association with climate change but also due to the growinghuman occupation in coastal areas (van Dongeren et al., 2018). Since the threatened coastal areas are often densely populated, there is a need to implement measures to prevent risks. One of such measures is the use of Early Warning Systems (EWS) that anticipate expected risks and, therefore, work as management tools to minimize or avoid disaster. This work presents the basis of an EWS prototype to alert about the potential consequences of overwash/overtopping and erosion induced by storms, in coastal areas.
Year: 2023
Author(s): Ferreira, Ó.; Garzon, J.L.; Ferreira, A. M.; Zózimo, A. C.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.
Editor: World Scientific
Info
Conceptual and quantitative categorization of wave
Beaches combined with sloping structures are frequently the frst element of defense to protect urban areas from the impact of extreme coastal fooding events. However, these structures are rarely designed for null wave overtopping discharges, accepting that waves can pass above the crest and threat exposed elements in hinterland areas, such as pedestrians, urban elements and buildings, and vehicles. To reduce risks, Early Warning Systems (EWSs) can be used to anticipate and minimize the impacts of fooding episodes on those elements. A key aspect of these systems is the defnition of non-admissible discharge levels that trigger signifcant impacts. However, large discrepancies in defning these discharge levels and the associated impacts are found among the existing methods to assess foodings. Due to the lack of standardization, a new conceptual and quantitative four-level (from no-impact to high-impact) categorization of food warnings (EW-Coast) is proposed. EW-Coast integrates and unifes previous methods and builds on them by incorporating feld-based information. Thus, the new categorization successfully predicted the impact level on 70%, 82%, and 85% of the overtopping episodes afecting pedestrians, urban elements and buildings, and vehicles, respectively. This demonstrates its suitability to support EWSs in areas vulnerable to wave-induced fooding.
Year: 2023
Author(s): Garzon, J.L.; Ferreira, O.; Reis, M. T. L. G. V.; Ferreira, A. M.; Fortes, C. J. E. M.; Zózimo, A. C.
: Scientific Reports
Editor: Communications Engineering
Info
Damage Evolution in Physical Scale Model Tests of a Stretch of the Breakwater of Peniche Harbour.
During physical scale model tests of rubble mound breakwaters, the assessment of the eroded volume of the armour layer subjected to incident sea waves can be determined from consecutive surveys of the surface of the armour layer after each test run. This enables one to assess the damage level of the struc ture by comparing erosion profiles and by the eroded volume between consecutive surveys of the tested section. The present study aimed to evaluate the damage evolu tion of a section of the Peniche harbour west breakwater, whose armour layer is made of tetrapods, A dimensionless damage parameter was computed, based on the eroded volume at the end of each test. The test program consisted of three test series (A, B and C) with different durations and wave conditions sequences, considering the low-water level (water depth of 0.20 m at the toe of the structure) and high-water level (0.24 m) and sea states with peak periods Tp = 1.70 s and Tp = 1.98 s and significant wave heights, Hm0, ranging between 0.12 m and 0.19 m. The model was built and operated according to Froude
Year: 2023
Author(s): Lemos, R.; Fortes, C. J. E. M.; Santos, J. A.; Mendonça, A. C.
Editor: Rilem
Keywords: 3D surface model; Position sensor; Damage evolution; Breakwater
Info
Damage Evolution Prediction during 2D Scale-Model Tests of a Rubble-Mound Breakwater: A Case Study of Ericeira
Melby presents a formula to predict damage evolution in rubble-mound breakwaterswhose armour layer is made of rock, based on the erosion measured in scale-model tests and thecharacteristics of the incident sea waves in such tests. However, this formula is only valid for armourlayers made of rock and for the range of tested sea states. The present work aims to show howthe Melby methodology can be used to establish a similar formula for the armour layer damageevolution in a rubble-mound breakwater where tetrapods are employed. For that, a long-durationtest series is conducted with a 1:50 scale model of the quay section of the Ericeira Harbour breakwater.The eroded volume of the armour layer was measured using a Kinect position sensor. The damageparameter values measured in the experiments are lower than those predicted by the formulationfor rock armour layers. New ap and b coefficients for the Melby formula for the tested armour layerwere established based on the minimum root mean square error between the measured and thepredicted damage. This work shows also that it is possible to assess the damage evolution in scale model tests with rubble-mound breakwaters by computing the eroded volume and subsequently, thedimensionless damage parameter based on the equivalent removed armour units.
Year: 2023
Author(s): Lemos, R.; Santos, J. A.; Fortes, C. J. E. M.
: Modelling
Editor: MDPI
Keywords: Position sensor; Damage evolution; Rubble-mound breakwater
Info
Determination of Wave Run-Up Through the TimesTack Methology and hrough a Resistive Wave Gauge. a Comparative Analysis
The objective of this work is the comparison of two methodologies used for run-up measurements in a two-dimensional physical model, which represented the protection breakwaters of the Peniche and Ericeira
Year: 2023
Author(s): Lemos, R.; Fontes, R.; Fortes, C. J. E. M.; Andriolo, U.; Rito, J.
Editor: Reterm
Keywords: Breakwater; Physical model; RimeStack; Video analysis; Run-up
Info
Development of a Bayesian networks-based early warning system for wave-induced flooding
Coastal flooding prediction systems can be an efficient risk-reduction instrument. The goal of this study was to design, build, test, and implement a wave-induced flooding early warning system in urban areas fronted by sandy beaches. The system utilizes a novel approach that combines Bayesian Networks and numerical models (SWAN + XBeach) and was developed in two phases. In the development phase, firstly, the learning information was generated including the creation of oceanic conditions, modeling overtopping discharges, the haracterization of the associated im pacts (no, low, moderate and high) in pedestrians, urban components and buildings, and vehicles, and secondly, the Bayesian Networks were designed that surrogated the previously generated information. After their training, the conditional probability tables were created representing the foundation to make predictions in the operational phase. This methodology was validated for several historical events which hit the study area (Praia de Faro, Portugal), and the system correctly predicted the impact level of around 80% of the cases. Also, the predictive skills varied depending on the level, with the no and high impact levels overcoming the intermediate levels. In terms of efficiency, one simulation (deterministic) of coastal flooding for 72 h by running SWAN + XBeach operationally would take more than two days on a one-logical processor workstation, while the current approach can provide quasi-instantaneously predictions for that period, including probability distributions. Moreover, the two-working phase approach is very flexible enabling the inclusion of additional features such as social components representing a powerful tool for risk reduction in coastal communities.
Year: 2023
Number Pages:
19p..
Author(s): Garzon, J.L.; Ferreira, Ó.; Zózimo, A. C.; Fortes, C. J. E. M.; Ferreira, A. M.; Pinheiro, L.; Reis, M. T. L. G. V.
: International Journal of Disaster Risk Reduction
Editor: Elsevier
Volume:
Volume 96.
Keywords: Wave overtopping; Sandy beaches; Bayesian network; XBeach; Prediction system
|
Comunicação
Info
Modelling wave propagation over vegetation fields with SWASH
The ultimate goal of applying SWASH in the present work is to compare SWASH wave height results with laboratory results presented in Løvås (2000) and with field observations of Vo-Luong and Massel (2008) as well. Additionally, SWASH results will be also compared to the ones previously obtained by other empirical and numerical models (Mendez and Losada, 2004; Suzuki et al., 2012).Preliminary SWASH wave height simulations for breaking random waves over vegetation have shown an overall good agreement to the flume data presented in Løvås (2000). The agreement between SWASH and flume results looked worst at the wave breaking zone, which seems to be improved through a better wave breaking parametrization.
Year: 2019
Number Pages:
2p.
Author(s): Reis, R.; Pires Silva, A.; Fortes, C. J. E. M.; Suzuki , T.
Editor: APRH
Keywords: Wave dissipation; SWASH model; Vegetation; Wave propagation
Info
Physical modelling of wave-induced plant drag coefficient
Most of the previous studies on wave propagation over vegetation fields estimated drag coefficients (CD) for rigid and flexible plants by the so called calibration method which gave similar CD for both types of plants. However, CD may actually be considerably different when the drag force is directly measured. In order to investigate the wave dissipation and CD further, flume experiments for wave propagation over vegetation are conducted with a special focus on the benchmark single cylinder test that calculates CD by direct measurements in single rigid and flexible artificial plants.
Year: 2019
Number Pages:
45-46pp.
Author(s): Reis, R.; Suzuki , T.; LUBBERS, B.; Fortes, C. J. E. M.; Pires Silva, A.
Editor: FCUL
Keywords: Flume experiments; Wave propagation; Plant flexibility; Vegetation
Info
Projeto BSAFE4SEA - controlo da segurança de quebra-mares através da análise de um sistema de previsão e apoio à decisão: desenvolvimentos iniciais
O projeto BSafe4Sea visa desenvolver, testar e comprovar o conceito de previsão do comportamento estrutural de quebra-mares de talude como a base de um sistema inovador de apoio à decisão. A utilização de fotografias aéreas obtidas com veículos aéreos não tripulados, de vídeo e de posicionamento com GNSS, juntamente com a avaliação probabilística do comportamento dos quebra-mares baseada em modelos físicos e numéricos, apoiarão o planeamento e a priorização de trabalhos de manutenção e reparação, aumentando a segurança, funcionalidade e resiliência destas obras. Este sistema é urgente devido à sua relevância para as modernas redes de transporte de mercadorias e passageiros e às condições extremas a que os quebra-mares estão sujeitos, e que se poderão agravar devido às alterações climáticas.
Year: 2019
Number Pages:
5p.
Author(s): Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Capitão, R.; Henriques, M. J.; Silva, H.; Andriolo, U.; Soares, F.; Santos, J. A.; Neves, M. G.; Lemos, R.; Mendonça, A. C.; Pinheiro, L.; Lima, J. N.; Peña,
Editor: APRH
Keywords: Apoio à decisão; Previsão; Dano; Quebra-mares de talude; BSafe4Sea
Info
Recent advances in LNEC´s monitoring of maritime works in Portugal
This paper describes a programme under the responsibility of LNEC for the systematic observation and monitoring of maritime works that has successfully been applied to an extensive number of maritime structures on the Portuguese mainland coast and abroad.The now-called OSOM+ programme comprises the following four main components for each structure: periodic visual inspections by an experienced technician; periodic aerial inspections with a UAV/drone; a ANOSOM-GIS database, to store and/or query obtained information on the observation campaigns, as well as to diagnose present, evolution and risk conditions of the structure; a mobile, portable, application, for real-time input and visualization of the database information.This recently updated methodology encompasses a number of tools and functionalities that are illustrated in this paper with applications to a real case, the Faro-Olhão
Year: 2019
Number Pages:
207-219pp.
Author(s): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Henriques, M. J.
Editor: ISEP
Keywords: Maritime works; Aerial surveys; Systematic monotoring program
Info
Risk forecast system for a moored ferry ship in S. Roque do Pico port
In this paper, the development of such system, called SWAMS ALERT, is detailed and an illustration on how it applies to a real port is presented, namely the port of S. Roque do Pico. SWAMS ALERT is as risk forecast and management system for the safety of transiting ships and moored ships in ports and harbors. This system can be fine-tuned to a specific port, thus becoming a valuable tool to help in the selection of docking and mooring devices. SWAMS ALERT extends the functionality of the wave overtopping events forecast system HIDRALERTA to include the ship
Year: 2019
Number Pages:
86-91pp.
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.
Editor: EdiBios
Keywords: Alert system; Moored ships; Forecast system
Info
Sines breakwater harbour: the OSOM+ monitoring program
Since 1986, the National Laboratory for Civil Engineering (LNEC) has developed a program for Systematic Observation of Maritime Works (OSOM) for the structures under the responsibility of the former Port and Maritime Transport Institute (IPTM).The objective of this program is to monitor the behavior of the structures and recommend timely interventions for their maintenance and/or repair. Recently, with the acquisition by LNEC of an unmanned aerial vehicle (UAV, or drone), a number of structural surveys have been carried out to complement the information obtained in above mentioned visual observation campaigns. The UAV provides more detailed and accurate information on the state of the structures. It also allows the assessment of the evolution of structures
Year: 2019
Number Pages:
146-151pp.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Silva, L. G.; Henriques, M. J.; Martins, T.
Editor: EdiBios
Keywords: Harbour; Sines; OSOM+
Info
Sistema de previsão, alerta e gestão de risco de galgamentos nos portos de Praia da Vitória, S. Roque do Pico e Madalena do Pico, Açores
Neste artigo descreve-se o trabalho desenvolvido, até ao presente na construção, desenvolvimento e implementação dos 2 novos protótipos do sistema HIDRALERTA para os portos da Madalena do Pico e de S. Roque do Pico, ambos na Ilha do Pico, Açores. Este sistema permite a previsão e alerta de situações de emergência relacionadas com agitação marítima, galgamentos, inundações.
Year: 2019
Number Pages:
4p.
Author(s): Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Pinheiro, L.; Mendonça, A. C.; Poseiro, P.; Barateiro, J.; Serrazina, V.; SALVADOR, M.; Reis, F.; Azevedo, E. B.
Editor: APRH
Keywords: Porto da Praia da Vitória; Porto da Madalena do Pico; Porto de S. Roque do Pico; Estruturas marítimas; Zonas portuárias; Galgamentos; Sistema de previsão e alerta
Info
Three-dimensional surface models of breakwaters, obtained from drone surveys. From the prothotype to the laboratory
The recent acquisition of an UAV (Unmanned Aerial Vehicle), or drone, has enriched ongoing LNEC
Year: 2019
Number Pages:
12p.
Author(s): Lemos, R.; Henriques, M. J.; Capitão, R.; Fortes, C. J. E. M.
Editor: ISEP
Keywords: Drone surveys; Breakwaters; Surface models
Info
Análise da influência da variação da profundidade na interação entre dois navios
Nesta comunicação analisa-se a influência da variação da profundidade na interação hidrodinâmica entre dois navios, um estacionário e outro navegando na vizinhança, com recurso à modelação física e numérica. O navio em movimento é um modelo autopropulsionado à escala do navio de transporte de produtos químicos
Year: 2018
Number Pages:
14p.
Author(s): Pedro, F.; Santos, J. A.; Pinheiro, L.; Fortes, C. J. E. M.; Hinostroza , M.
Editor: APRH
Keywords: Movimentos de navios; Interação navio-navio; Modelo numérico; Modelo físico; Ondas de esteira
Info
Análise das forças atuantes num emissário submarino utilizando um tanque de ondas numérico RANS-VoF
O conhecimento das forças devido à ação das ondas que atuam nos emissários submarinos compostos por uma conduta e anéis de estabilização de betão, para agitação com direção de propagação próxima da direção do emissário, é essencial para o seu dimensionamento. Esta é uma configuração complexa, para a qual a modelação numérica, utilizando modelos 3D de tipo RANS-VoF (Reynolds-Average-Navier-Stokes Volume-of-Fluid), é especialmente adequada para obter uma estimativa das forças na conduta e nos anéis. O presente estudo consiste na simulação de um emissário submarino com anéis de estabilização à escala 1:15 que foi ensaiado num tanque de ondas tridimensional, nas instalações do Danish Hydraulics Institute (DHI), para estudar a influência da direção da agitação incidente e da distância da conduta ao fundo nas forças que atuam no emissário. Foram realizados ensaios sem e com anéis (2 tipos de anéis), para diferentes condições de agitação e direções de agitação incidente (90º, i.e., perpendicular à conduta, 30º e 10º) e para três distâncias da conduta ao fundo (0.0, 0.020 e 0.033m). Os resultados numéricos são comparados aos experimentais para agitação com direcção de propagação perpendicular ao emissário, para 3 alturas de onda incidente. Verificou-se que o modelo de turbulência k-
Year: 2018
Number Pages:
1886-1894pp.
Author(s): Didier, E.; Neves, M. G.; Teixeira, P. R. F.
Editor: FURG
Keywords: Tanque de ondas numérico; Forças. RANS-VoF; Emissários submarinos
|
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
|
Relatório Científico
Info
Agitação marítima na costa portuguesa. Base de dados de temporais.
N/A
Year: 1987
Author(s): Santos, L. M.; Pinto, B. G.; Figueira, P.
Info
Agitação marítima na Costa Portuguesa. Dados de base. Observações efectuadas em Viana do Castelo. Relatório DGP
N/A
Year: 1987
Author(s): Pita, C. A.; Carvalho, M. M.; Santos, J. M. T.; Veloso, E. S.; Damião, A.; Botelho, L.
Info
Agitação marítima na Costa Portuguesa. Dados de base. Observações efectuadas na Figueira da Foz
N/A
Year: 1987
Author(s): Pita, C. A.; Carvalho, M. M.; Santos, J. M. T.; Veloso, E. S.; Damião, A.; Botelho, L.
Info
Agitação marítima na Costa Portuguesa. Dados de base. Observações efectuadas na Póvoa de Varzim e Leixões
N/A
Year: 1987
Author(s): Pita, C. A.; Carvalho, M. M.; Santos, J. M. T.; Veloso, E. S.; Damião, A.; Botelho, L.
Info
Agitação marítima na Costa Portuguesa. Dados de base. Temporais.
N/A
Year: 1987
Author(s): Pita, C. A.; Carvalho, M. M.; Santos, J. M. T.; Veloso, E. S.; Damião, A.; Botelho, L.
Info
Deslocação à Ilha do Pico (Açores) ao abrigo do convénio LNEC-SRES
N/A
Year: 1987
Author(s): Pita, C. A.
Info
Diagramas de refracção para as zonas marítimas adjacentes a Caminha e Viana do Castelo.
N/A
Year: 1987
Author(s): Covas, J. A.
Info
Ensaio em modelo reduzido do molhe de Vila do Porto
N/A
Year: 1987
Author(s): Silva, L. G.; Pita, C. A.
Info
Ensaios de agitação do porto de abrigo do Porto Santo
N/A
Year: 1987
Author(s): Pita, C. A.
Info
Modelo de refracção. Ondas irregulares.
N/A
Year: 1987
Author(s): Covas, J. A.; Pontes, M. T.; Brandão, M. A.
|
|
|
|
|
Outro
Info
Propagação de grupos de ondas e ondas de longo período na costa
N/A
Year: 1999
Number Pages:
29 p.
Author(s): Santos, J. A.; Neves, M. G.
Editor: ******
Info
Relato da missão a Bruxelas (6 a 8 de Abril de 1999) para participação na 11ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS
N/A
Year: 1999
Number Pages:
4 p.
Author(s): Covas, J. A.
Editor: ******
Info
Relato da missão a Paris (20 a 22 de Outubro de 1999) para participação no Workshop final e na 13ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPO
N/A
Year: 1999
Number Pages:
7 p.
Author(s): Covas, J. A.
Editor: ******
Info
Relato da missão a Warnemünde (9 a 11 de Junho de 1999) para participação na 12ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS
N/A
Year: 1999
Number Pages:
4 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic simulation of sea waves
N/A
Year: 1999
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
SPANWAVE II: Wave-Induced Turbulence and Undertow over Barred Beaches
N/A
Year: 1999
Number Pages:
15 p.
Author(s): Sancho, F. E.; Tomasicchio, G.; Carmo, J. A.; Damiani, L.
Editor: ******
Info
A Revista "Recursos Hídricos". 20 Anos da Associação Portuguesa de Recursos Hídricos (1977-1997)
N/A
Year: 1998
Author(s): Marcos Rita, M.
Editor: ******
Info
Emissários Submarinos na Costa Portuguesa - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protecção da
N/A
Year: 1998
Number Pages:
9 p.
Author(s): Covas, J. A.; Carvalho, R. M. G.; Marcos Rita, M.; Sancho, F. E.
Editor: ******
Info
Modelo Matemático de Propagação e Deformação de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT),
N/A
Year: 1998
Number Pages:
9 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
Relato da missão a Bruxelas (24 a 26 de Março de 1998) para participação na 8ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efectu
N/A
Year: 1998
Number Pages:
4 p.
Author(s): Covas, J. A.
Editor: ******
|
Hydraulics and Environment Department
