Papers
Info
Wave overtopping and flood risk assessment in harbours: a case study of the port of Las Nieves, Gran Canaria
This paper presents the analysis of the probability of occurrence of wave overtopping events as well as its consequences at the Port of Las Nieves in Agaete, Gran Canaria Island, with the evaluation of the resulting level of flood risk. The study has been conducted using a third-generation spectral wave model to reproduce wave propagation from deep to shallow water depths considering the associated mean sea level, and a neural network-based model, for estimating mean wave overtopping discharges. Results reveal that overtopping in the initial sections of the port, located in the port access area, is substantially higher than that associated with the cross-sections of the main body of the breakwater, so that control actions to reduce overtopping are required due to the important socioeconomic implications regarding the infrastructure inoperability.
Year: 2017
Number Pages:
1-10pp.
Author(s): Santana-Ceballos, J.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Rodríguez, G.
: WIT Transactions on the Built Environment
Editor: WIT Press
Volume:
Vol. 170.
Keywords: Port of Las Nieves; Neural networks; Flood risk; Wave overtopping
Info
Avaliação comparativa de ferramentas neuronais. Aplicação à Praia da Vitória, Terceira, Açores
Neste trabalho, descreve-se a aplicação ao porto e baía da Praia da Vitória, na ilha Terceira, Açores, Portugal, da metodologia de avaliação do risco de galgamentos em estruturas marítimas em desenvolvimento no LNEC, considerando duas ferramentas neuronais para cálculo dos galgamentos baseadas em resultados da aplicação de redes neuronais artificiais, nomeadamente a ferramenta NN_Overtopping2 e a Overtopping Predictor v1.1. Em particular, avalia-se comparativamente quais as implicações que a utilização de cada uma destas ferramentas tem em termos de número de eventos de galgamento e magnitude dos caudais médios galgados, bem como consequente grau de risco, para as 9 secções-tipo de estruturas marítimas estudadas no porto e baía da Praia da Vitória. O período de estudo é de 5 anos (2008 a 2012).
Year: 2016
Number Pages:
49-68pp.
Author(s): Reis, R.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.; Santos, J. A.
: Vetor
Editor: FURG
Volume:
Volume 26, n. 1.
Keywords: Galgamentos; Risco; Praia da Vitória; Porto; Overtopping predictor V1.1; NN_Overtopping2; Ferramentas neuronais
Info
Galgamento de uma estrutura portuária protegida por um quebra-mar submerso: o caso do Porto de Leixões, Portugal
O galgamento de estruturas portuárias consiste na passagem de água sobre o coroamento da estrutura pela ação da agitação marítima e é um dos fenómenos com maior impacto na integridade da estrutura e na segurança da zona por ela protegida. O principal objetivo deste trabalho é estudar o galgamento num quebra-mar de taludes, com um importante muro cortina, protegido por um quebra-mar submerso. Em particular, pretende-se otimizar a geometria do quebra-mar submerso situado a barlamar do quebra-mar de taludes, no qual se pretende diminuir o galgamento.A estrutura marítima em estudo é o molhe norte do Porto de Leixões, em frente ao qual já existe um quebra-mar submerso na zona da cabeça. Pretende-se estender a zona do molhe protegida pelo quebra-mar submerso e, para tal, é necessário estudar qual a melhor geometria e posição a adotar para este quebra-mar.Para estudar a influência da geometria e da posição do quebra-mar submerso no galgamento do molhe norte, utilizou-se o modelo numérico IH2VOF. Simularam-se três condições de agitação regular, que diferem somente na altura de onda, e sete geometrias do quebra-mar submerso, que diferem da configuração original (a existente atualmente) em três características: a distância entre o quebra-mar submerso e o molhe, a cota de coroamento do quebra-mar submerso e a sua largura de coroamento.Com a realização deste estudo, para as condições de agitação consideradas, verificou-se que as características com maior impacto na redução do galgamento no molhe norte do Porto de Leixões são: o aumento da distância entre o quebra-mar submerso e o molhe e o aumento da cota de coroamento do quebra-mar submerso. O caudal médio de galgamento para as condições de agitação em estudo reduziu-se de um valor máximo de 0,71 l/s/m para a configuração original para 0,02 l/s/m em duas das novas configurações analisadas, ou seja, uma redução de 97% face à configuração original.
Year: 2016
Number Pages:
121-131pp.
Author(s): Bairrão, M.; Neves, M. G.; Reis, M. T.; Taveira-Pinto, F.
: Revista de Gestão Costeira Integrada / Journal of Integrated Coastal Zone Management
Editor: APRH
Volume:
16 (2).
Keywords: Modelação física; IH2VOF; Modelação numérica
Info
Improving the aerodynamic performance of Vila-Real Bridge deck-section
The susceptibility of bridge decks to vortex induced oscillations can b eaddressed through wind-tunnel testing. This paper considers the case of the Vila-Real Bridge, in the north of Portugal, which has the highest deck above ground (230m), among concrete-deck bridges cable-stayed in the central plane. It has a single-cell rectangular box girder with a wide top flange supported by regularly spaced inclined struts. Aeroelastic studies of this precise type of deck seem nonexistent in the literature.Results of sectional model tests are presented for a selection of three distinct angles of attack and three deck configurations, including a solution, alternative to the usual mitigation measures, that solved the susceptibility to vortex induced vibration of the deck and that has no relevant additional design or building costs.With the proposed approach, bridge designers may be able to relegate the use of sections with high aerodynamic performance
Year: 2016
Number Pages:
72-83pp.
Author(s): Vaz, D.; Almeida , R.A.S.B; Didier, E.; Urgueira, A.P.V.; Borges, A.R.J.
: Journal of Wind Engineering and Industrial Aerodynamics
Editor: Elsevier
Volume:
Volume 156.
Keywords: Box girder; Wind tunnel testing; Sectional model; Oscillations mitigation; Bridge aeroelasticity
Info
Mechanics of the scouring and sinking of submerged structures in a mobile bed: A physical model study
Wave-induced flow velocity and turbulence may cause scouring in the seabed around coastal structures depending on the wave climate and tidal water depth. A 3-D physical modelling study was conducted to investigate the possible causes of the sinking of two submerged coastal structures on the Santa Maria del Mar (SMM) beach, Spain. The experimental investigation was conducted by employing a Froude similarity law with a geometric scale of 1:20, and the submerged modular structure was subjected to different wave climates and tidal water levels. The combinations of the significant wave height and peak period were chosen from in-situ real wave conditions thatwere monitored during the sinking of the prototype structures. Linking and unlinking conditions for the modules in the structure were investigated in this study. The results show that the modules sank to approximately 48% of their height at the end of the tests with storm waves and semi-linking conditions of low water depth. Most of the experimental results were compatible with the prototype monitoring results. Tests with proper linking among themodules and testswith an appropriate gravel foundation resulted in a sustainable solution because they presented much less or almost no scouring and sinking.
Year: 2016
Number Pages:
50
Author(s): Khan-Mozahedy, A.B.M.; Muñoz-Perez, J.; Neves, M. G.; Sancho, F. E.; Cavique, R.
: Coastal Engineering
Editor: Elsevier
Volume:
110.
Keywords: Gravel bed; Sandy bed; Pumice stone; Submerged modular structure; Sinking; Scour
Info
Numerical simulation of flow interaction between stationary and downstream elastically mounted cylinders in tandem at low Reynolds numbers
Despite the simplicity of the geometry of the circular cylinders, the uniform flow around them is complex,since it may induce unsteady forces on structures associated with vortex shedding. This paper describes the study of two circular cylinders (the downstream one is elastically mounted in transversal direction) in tandem arrangement subject to bi-dimensional uniform laminar flows at low Reynolds numbers. The academic numerical model Ifeinco, which is based on the finite element method and uses a partitioned scheme that considers two-way interaction of fluid flow and structure, has been employed to the analysis.Firstly, both stationary cylinders in tandem arrangement for Re = 100 are analysed for center to center distance between the cylinders, L/D, from 1.5 to 6.0. Results of lift and drag coefficients and Strouhal number are compared with other numerical results and good agreement is found. Secondly, numerical results for L/D = 5.25, considering downstream elastically mounted cylinder, are analysed for Reynolds numbers ranging from 100 to 140. It shows that the resonance occurs for Reynolds numbers between 115 and 120 and the maximum dimensionless amplitude of oscillation is 0.721 for Re = 118.
Year: 2016
Number Pages:
11p.
Author(s): Teixeira, P.; Didier, E.
: Journal of the Brazilian Society of Mechanical Sciences and Engineering
Editor: Springer
Keywords: Wake interference; Tandem arrangement; Circular cylinders; Flow-induced vibration; Finite element method
Info
Numerical simulation of wave interacting with a submerged cylinder using a 2D RANS model
A 2D RANS numerical model (IH2VOF) is employed to study wave interacting with a circular cylinder with a diameter of 0.02 m in a water depth of 0.27 m, with a wave period of 1.08 s and a wave height of 0.047 m. The influence of the wall proximity on the forces is analyzed for ratiosbetween the pipe (i.e. circular cylinder) distance from the bottom and the pipe diameter varying from 0.04 to 1.5. Results of lift forces and streamlines are compared with the experimental results of Jarno-Druaux et al. (1995) and good agreement is found. Lift, drag and inertia coefficients are also compared with experimental results and the same trend of fundamental quantities with the gap between the cylinder and the bottom was obtained with the model giving slightly larger values. Finally, the influence of the method to estimate the drag and inertia coefficients in the force calculated using Morison equation is analyzed and Morison method shows the better agreement.
Year: 2016
Number Pages:
1
Author(s): Inverno, J.; Neves, M. G.; Didier, E.; Lara, J. L.
: Journal of Hydro-environment Research
Editor: Elsevier
Volume:
12.
Keywords: Hydrodynamic forces; Submerge circular cylinder; Drag and inertia coefficients; RANS modeling
Info
Performance of a fuzzy ARTMAP artificial neural network in characterizing the wave regime at the Port of Sines (Portugal)
Techniques based on artificial neural networks (ANNs) have been increasingly applied to predict emergency situations, such as extreme wave conditions, wave overtopping or flooding, and damage to maritime structures, in coastal and port areas. In this work, a fuzzy adaptive resonance theory with mapping (FAM) ANN was trained to predict the wave regime both inside and at the entrance to the Port of Sines, one of the major trade and economic gateways of the Iberian Peninsula, located on the Portuguese west coast. In situ measurements using pressure sensors, wave buoy data, and results from two numerical wave propagation models
Year: 2016
Number Pages:
1362
Author(s): Santos, F.; Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Lotufo, A.; Neves, D. R.; Poseiro, P.; Maciel, G.
: Journal of Coastal Research
Editor: Coastal Education and Research Foundation
Volume:
Volume 32, Issue 6.
Keywords: Artificial neural network (ANN) training and validation; In situ measurements; Wave buoy data; Numerical wave propagation modeling
Info
Photogrammetric analysis of rubble mound breakwaters scale model tests
The main goal of this paper is to develop a photogrammetric method in order to obtain arobust tool for damage assessment and quantification of rubble-mound armour layers during physicalscale model tests. With the present work, an innovative approach based on a reduced number ofdigital photos is proposed to support the identification of affected areas. This work considers twosimple digital photographs recording the instants before and after the completion of the physicaltest. Mathematical techniques were considered in the development of the procedures, enabling thetracking of image differences between photos. The procedures were developed using an open-sourceapplication, Scilab, nevertheless they are not platform dependent. The procedures developed enablethe location and identity of eroded areas in the breakwater armour layer, as well as the possibilityof quantifying them. This ability is confirmed through the calculation of correlation coefficients ineach step of the search for the more damaged area. It is also possible to make an assessment of themovement of armour layer units.
Year: 2016
Number Pages:
541
Author(s): Lemos, R.; Loja, M.A.R.; Rodrigues, J.; Rodrigues, J.A.S.
: AIMS Environmental Science
Editor: AIMS Press
Volume:
3(3).
Keywords: Scale model tests; Pphotogrammetric analysis; Rubble-mound breakwaters
Info
Smoothed particle hydrodynamics numerical model for modelling an oscillating water chamber
This paper presents theapplicatio nand thevalidation of the SPH numerical model SPHyCE, based on astandard Smoothed Particle Hydrodynamics formulation, for modeling anonshore oscillating waterchamber, comparing results of amplification factor and phase lag with those obtained by a mesh-basedRANS model .Firstly, ananalysis of the results for differentre solutions (i.e.particle dimension) showedthe independence of results with refinement. Secondly, the amplification factor of mean free surfaceelevation inside th eoscillating water chamber and the phase lag between time series of free surfaceelevation outside and inside the water chamber were analysed. A good agreement was achieved between the mesh free SPHyCE model and the mesh-based RANS model. SPHyCE model was finally applied to analyse the hydrodynamic fluid flow inside and outside the water chamber and to quantify the forces onthe vertical wall and the amplification factor for different incident wave heights for a rough sea state with complex wave breaking, impact loads and overtopping, contributing to the future applications ofSPH models for development and studies of OWC devices.
Year: 2016
Number Pages:
397
Author(s): Didier, E.; Neves, D. R.; Teixeira, P.; Dias, J.; Neves, M. G.
: Ocean Engineering
Editor: Elsevier
Volume:
123.
Keywords: Coastal engineering; Hydrodynamic forces; Wave
|
Comunicação
Info
3.ª e 4.ª fases de ampliação do Molhe Leste do Porto de Sines
Encontra-se em curso a empreitada da 3.ª Fase de ampliação do Molhe Leste do Porto de Sines em 750 m, a qual irá conferir a esta estrutura um comprimento total de 2250 m. Esta empreitada tem por intuito permitir alargar a bacia portuária abrigada que se encontra dedicada ao Terminal de Contentores de Sines (Terminal XXI), de molde a permitir (i) garantir condições adequadas de abrigo à agitação marítima dos novos postos de acostagem do Terminal ainda não construídos, (ii) proporcionar melhores condições de manobras de acesso e rotação dos navios de maiores dimensões, (iii) incrementar a operacionalidade do posto já existente, cujas taxas de utilização têm vindo a crescer, e (iv) não condicionar a expansão do porto para sul.
Year: 2022
Author(s): Luis, L.; Freire, S.; Barros, J.; Lemos, R.; Silva, L. G.; Fortes, C. J. E. M.; Neves, M. G.; Idalino, S.; Aparício, L.
Editor: PIANC
Info
Assessing wave-induced flooding risk at the Algarve coast for current and future conditions
Wave-induced flooding represents a threat and sea-level risk will exacerbate the problem.
Year: 2022
Author(s): Garzon, J.L.; Zózimo, A. C.; Ferreira, Ó.; Ferreira, A. M.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.
Editor: 7as Jornadas de Engenharia Hidrográfica / 2as Jornadas Luso-Espanholas de Hidrografia
Keywords: XBeach; wave overtopping; sea-level rise; coast flooding; Bayesian network
Info
Assessment of wave-induced flooding risk under current and future conditions
Disaster risk reduction are crucial to minimize the loss of lives and livelihoods, and to enhance community resilience and preparedness to extreme climate-related events.
Year: 2022
Author(s): Zózimo, A. C.; Hervas, J.; Ferreira, A. M.; Ferreira, Ó.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Manz, A.; Pinheiro, L.
Editor: 16th International Conference Littoral22
Info
AVALIAÇÃO DE VOLUMES INDIVIDUAIS GALGADOS NA ERICEIRA COM O MODELO NUMÉRICO SWASH
Neste trabalho, utilizou-se o modelo numérico SWASH para avaliar os volumes galgados em ondas individuais no quebra-mar da Ericeira. Começa-se por definir o valor do coeficiente de Manning a utilizar no talude do quebra-mar, para simular perda de energia provocada pela rugosidade e pela percolação no processo do galgamento, comparando o volume galgado previsto pelo modelo numérico com os valores medidos nos ensaios com modelo físico realizados no LNEC, para um dado estado de agitação. Depois, para ondas selecionadas do mesmo estado de agitação verifica-se se o modelo numérico fornece valores semelhantes aos do mesmo modelo físico.
Year: 2022
Author(s): Santos, J. A.; Fortes, C. J. E. M.; Gomes, J.
Editor: CLME2022
Keywords: modelo numérico; modelo reduzido; quebra-mar de taludes; galgamento
Info
BlueSafePort Project
This paper presents a safety system for maneuvering and moored ships at the Port of Sines developed in the scope of the BlueSafePort project. The system is described in terms of its development and architecture, the functioning of its numerical models, the data flow and processing and the risk assessment used to issue alerts. The web platform and the mobile application where the relevant results to assess the referred risks are disseminated are also presented. The system provides 3-day advance forecasts of sea agitation, wind and tide conditions, as well as ship motions, identifying situations that could have serious consequences for ships maneuvering or moored inside the port. The system issues alerts associated with risk levels based on safety and operability criteria for ships' motions and forces in their mooring systems.
Year: 2022
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Gomes, A.; Santos, J. A.; Guedes Soares, C.
Editor: MARTECH2022
Info
Caraterização da agitação marítima e das sobrelevações em torno das obras de expansão e requalificação do Porto Inglês (Ilha do Maio
No âmbito do projeto das
Year: 2022
Author(s): Soares, R. E.; Fortes, C. J. E. M.; Neves, M. G.; Lemos, R.; Costa, C.E.B.C.; Silva, L. G.; Pinheiro, L.
Editor: AQUIMAR
Info
Comparação de técnicas fotogramétricas na reconstituição digital do modelo físico 3D do prolongamento do molhe leste do porto de Sines
Neste trabalho são apresentados os resultados da comparação entre três metodologias para obtenção de modelos tridimensionais de superfície, aplicadas à situação específica do modelo físico 3D do prolongamento do molhe leste do porto de Sines: são elas as aqui designadas técnicas
Year: 2022
Number Pages:
12p.
Author(s): Capitão, R.; Fortes, C. J. E. M.; Lemos, R.
Editor: PIANC
Keywords: Técnicas fotogramétricas; LiDAR; Metashape; Kinect; Levantamentos tridimensionais
Info
Damage evolution of rubble-mound breakwaters based on aerophotogrammetric surveys
Due to its extensive coastal zone, Portugal owns many related maritime structures, the most common of whichare breakwaters that usually protect man-made harbours.These maritime structures, especially rubble-mound breakwaters, are assumed to be at risk in the design proccess, due to the load they can withstand. Therefore, at some point in the life of the marine structure, repairs willbe required, and monitoring programs are deemed of paramount importance in assessing damage evolution ofsuch structures.The use of an UAV (Unmanned Aerial Vehicle), or drone, has enriched ongoing LNEC
Year: 2022
Author(s): Lemos, R.; Capitão, R.; Fortes, C. J. E. M.; Henriques, M.; Ferreira, J.; Jóia, C.
Editor: 16th International Conference Littoral22
Info
Estudos e projetos do prolongamento do quebra-mar exterior do Porto de Leixões
Entre 2016 e 2020 foram realizados os Estudos e Projetos e Estudos de Impacto Ambiental (EIA) dos projetos do Prolongamento do Quebra-mar Exterior e das Acessibilidades Marítimas do Porto de Leixões, os quais envolveram ensaios em modelo físico reduzido realizados no Laboratório Nacional de Engenharia Civil (LNEC) entre outubro 2016 e abril 2017, encontrando-se atualmente em curso a respetiva empreitada de construção. Os estudos, projetos e ensaios bi e tridimensionais em modelo reduzido do Prolongamento do Quebra-mar Exterior em cerca de 300 m, destacam-se essencialmente por se tratar de um quebra-mar sujeito a um regime de agitação consideravelmente severo e por envolver o uso de blocos de betão de alta densidade (peso especifico de 27,2 kN/m3 a 32 kN/m3 ) do tipo Antifer, cujo comportamento idráulico e estrutural, apesar da experiência adquirida na utilização deste tipo de blocos no Molhe Sul da Barra do Rio Douro (também com betão com peso especifico de 32 kN/m3) e no Molhe Leste de Sines (peso especifico de 25,4 kN/m3 a 30,8 kN/m3), ainda se reveste de alguma complexidade. No âmbito destes estudos realizou-se inicialmente o Estudo Prévio (EP), com base no qual se realizaram os ensaios bi e tridimensionais, e em simultâneo com estes últimos, realizou-se o Projeto de Execução (PE). Neste, e com o objetivo de aumentar a segurança da estrutura, adotaram-se generalizadamente blocos de maior peso do que os ensaiados. Pretende-se com esta comunicação destacar as particularidades da adoção de blocos
Year: 2022
Author(s): Luis, L.; Freire, S.; Barros, J.; Lopes, H.; Lemos, R.; Fortes, C. J. E. M.; Neves, M. G.
Editor: PIANC
Info
Expansão e modernização do Porto Inglês. Ensaios em modelo reduzido tridimensional
No âmbito do projeto das
Year: 2022
Author(s): Silva, L. G.; Lemos, R.; Fortes, C. J. E. M.; Neves, M. G.; Pinheiro, L.; Robert, M.; Freire, S.
Editor: PIANC
Keywords: Ensaios em modelo reduzido tridimensional; Porto Inglês
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Missão à Holanda (24 a 27 de Agosto de 1991) do "Team leader" da tarefa A3-3.
N/A
Year: 1991
Author(s): Carvalho, M. M.
Info
Missão ao Reino Unido. Universidade de Liverpool.
N/A
Year: 1991
Author(s): Capitão, R.
Info
Missão do responsável pela tarefa B3 ao Delft Hydraulics (4 de Dezembro de 1990) e ao Danish Hydraulic Institute (6 de Dezembro de 1990).
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto da Baleeira.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto da Ericeira.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto de Sesimbra.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento dos quebra-mares de protecção do porto da Nazaré.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento dos quebra-mares de protecção do porto de Peniche.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Reforço do molhe do porto da Horta. Ensaios bidimensionais de estabilidade e galgamentos do perfil-tipo 2.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Reforço do molhe do porto da Horta. Ensaios bidimensionais de estabilidade e galgamentos.
N/A
Year: 1991
Author(s): Silva, L. G.
|
|
|
Outro
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Year: 1998
Number Pages:
3 p.
Author(s): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
53 p.
Author(s): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Year: 1998
Number Pages:
50 p.
Author(s): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Year: 1998
Number Pages:
2 p.
Author(s): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Year: 1998
Number Pages:
11 p.
Author(s): Carvalho, M. M.; Capitão, R.
Editor: ******
|