Papers
Info
Application of SWASH to Compute Wave Overtopping in Ericeira Harbour for Operational Purposes
This work aimed at testing the capability of the numerical model SWASH to be imple-mented in the prototype of the overtopping and
Year: 2022
Author(s): Manz, A.; Zózimo, A. C.; Garzon, J.L.
Editor: PIANC
Info
Applying the SAFEPORT system in a storm situation
This paper presents an application of the SAPORT safety system. It consists of a forecast and early warning system for emergency situations related to navigation, berthing, and morning in port areas.
Year: 2022
Author(s): Gomes, A.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.
Editor: Guedes Soares & Santos
Info
Avaliação do espraiamento por analise de vídeos de ensaios em modelo físico
O objetivo deste trabalho é a comparação de duas metodologias utilizadas na avaliação do espraiamento durante os ensaios em modelo físico bidimensional realizados no âmbito do projeto BSafe4sea. As metodologias utilizadas foram a tradicional de medição da altura de espraiamento com uma sonda resistiva e uma metodologia baseada em análise de vídeos, tendo sido avaliado o seu desempenho para uma das condições de teste
Year: 2022
Author(s): Fortes, C. J. E. M.; Andriolo, U.; Lemos, R.; MANTA, A.
Editor: PIANC
Keywords: Ensaios em modelo físico; BSafe4sea
Info
Caraterização da agitação marítima e das sobrelevações em torno das obras de expansão e requalificação do Porto Inglês (Ilha do Maio
No âmbito do projeto das
Year: 2022
Author(s): Soares, R. E.; Fortes, C. J. E. M.; Neves, M. G.; Lemos, R.; Costa, C.E.B.C.; Silva, L. G.; Pinheiro, L.
Editor: 7ªs Jornadas de Engenharia Hidrográfica / 2ªs Jornadas Luso-Espanholas de Hidrografia
Keywords: Análise temporal e espetral; Sobrelevação; Porto Inglês; Agitação marítima
Info
Comparação de técnicas fotogramétricas na reconstituição digital do modelo físico 3D do prolongamento do molhe do Porto de Sines
Neste trabalho são apresentados os resultados da comparação entre três metodologias para obtenção de modelos tridimensionais de superfície, aplicadas à situação específica do modelo físico 3D do prolongamento do molhe leste do porto de Sines.
Year: 2022
Author(s): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.
Editor: PIANC
Info
Damage Evolution Prediction during 2D Scale-Model Tests of a Rubble-Mound Breakwater: A Case Study of Ericeira
Melby presents a formula to predict damage evolution in rubble-mound breakwaters whose armour layer is made of rock, based on the erosion measured in scale-model tests and the characteristics of the incident sea waves in such tests. However, this formula is only valid for armour layers made of rock and for the range of tested sea states. The present work aims to show how the Melby methodology can be used to establish a similar formula for the armour layer damage evolu tion in a rubble-mound breakwater where tetrapods are employed. For that, a long-duration test series is conducted with a 1:50 scale model of the quay section of the Ericeira Harbour breakwater. The eroded volume of the armour layer was measured using a Kinect position sensor. The damage parameter values measured in the experiments are lower than those predicted by the formulation for rock armour layers. New
Year: 2022
Author(s): Lemos, R.; Santos, J. A.; Fortes, C. J. E. M.
: Modelling
Editor: MDPI
Keywords: rubble-mound breakwater; damage evolution; position sensor
Info
Desempenho de um dispositivo de aproveitamento da energia das ondas do tipo coluna de água oscilante integrado em três tipos de estruturas de proteção portuária
Os dispositivos de aproveitamento da energia das ondas do tipo Coluna de Água Oscilante (CAO) podem ser inseridos em proteções portuárias, tais como os quebra-mares verticais e de talude e quebra-mares sobre estacas. Assim, a interação entre a onda incidente e a estrutura na qual o dispositivo de aproveitamento da energia das ondas é integrado é significativamente diferente, já que, no caso de um quebra-mar vertical, a estrutura é impermeável e que, no caso de um quebra-mar de talude, a estrutura é porosa. O desempenho do dispositivo de CAO para estas três configurações é analisado para um intervalo de período de onda incidente regular entre 6 e 12 s e uma altura de onda de 1 m. O dispositivo de CAO integrado no quebra-mar vertical apresenta o maior desempenho (potência pneumática máxima de 70 kW), sendo que a potência pneumática é globalmente 3 % maior do que a do CAO inserido no quebra-mar de talude (potência pneumática máxima de 67,4 kW). O desempenho do dispositivo de CAO integrado no quebra-mar sobre estacas é similar ao do dispositivo em quebra-mar vertical para os períodos de onda inferiores a 9 s, mas apresenta uma perda de eficiência significativa para períodos de onda maiores.
Year: 2022
Author(s): Didier, E.; Teixeira, P.
Editor: ENMC, XIII ECTM
Keywords: RANS; Modelagem numéric; Quebra-mar vertical; Quebra-mar de talude; Coluna de água oscilante
Info
Determinação do espraiamento em quebra-mares de talude através da metodologia TimeStack e através de sonda resistiva. Uma análise comparativa
O objetivo deste trabalho é a comparação de duas metodologias utilizadas na avaliação do espraiamento durante os ensaios em modelo físico bidimensional dos quebra mares de proteção dos portos de Peniche e da Ericeira, realizados no âmbito do projeto BSafe4sea. As metodologias utilizadas foram a tradicional medição da altura de espraiamento com uma sonda resistiva e uma metodologia baseada em análise de vídeos, tendo sido avaliado o seu desempenho para diversas condições de teste. Em relação aos resultados obtidos, em termos de Ru2% e Rumax, verificou-se que o andamento e a ordem de grandeza dos valores obtidos com as duas técnicas eram bastante semelhantes, embora os valores obtidos pela análise do vídeo tenham sido, em geral, superiores aos obtidos pela sonda. Constatou-se, assim, que a técnica de imagem de vídeo é uma alternativa viável para medir o espraiamento. Recomenda-se, no entanto, o uso de luz difusa durante os testes, bem como a instalação fixa da câmara, para melhorar a precisão dos resultados obtidos com esta técnica.
Year: 2022
Author(s): Lemos, R.; Fontes, R.; Fortes, C. J. E. M.; Andriolo, U.; Rito, J.
Editor: XXV ENMC
Keywords: Quebra-mar; Modelo Físico; TimeStack; Análise de video; Espraiamento
Info
Energy assessment of potential locations for OWC instalation at the Portuguese coast
This work aims to determine the exploitable wave energy resource at five potential sites close to harbour pro tection facilities at the Portuguese coast, namely at the Azores archipelago, at Madeira Island and at Sines, on the coast of mainland Portugal. For that purpose, a third-generation wave model SWAN is used to transfer the offshore estimates of sea wave conditions to those points over the last 40 years. Sea states and wind fields are provided by the climate reanalysis datasets ERA5
Year: 2022
Author(s): Anastas, G.; Santos, J. A.; Fortes, C. J. E. M.; Pinheiro, L.
: Renewable Energy
Editor: Elsevier
Volume:
nº 200.
Keywords: OWC; Energy assessment
Info
Ensaios em Modelo Físico para Análise do Surf na Praia da Vagueira
Para determinadas condições de agitação marítima e nível de maré, são frequentes os eventos de galgamentos costeiros no aglomerado urbano e a ocorrência de problemas de erosão em certas zonas da praia da Vagueira. Para contrariar esta situação, foram efetuados no LNEC (a pedido da Agência Portuguesa do Ambiente, APA) um conjunto amplo de estudos em modelo numérico e físico para caraterizar e analisar a viabilidade de um quebra-mar destacado (QMD) multifuncional em frente à Praia da Vagueira. Os objetivos estabelecidos para esse QMD multifuncional foram que contribuísse para reduzir o risco de galgamentos costeiros no aglomerado urbano da Praia da Vagueira, promover o acréscimo do areal da praia emersa em frente à defesa aderente, reforçando a defesa natural contra a erosão e inundação costeira, e potenciar a criação de ondas de referência para o surf, e consequente reforço da economia associada a esta atividade. Na vertente do surf e dos estudos de modelação física, foram efetuados um conjunto de ensaios em modelo físico 3D para analisar as condições hidrodinâmicas em torno de um quebra-mar destacado (QMD) submerso, Sancho et al. (2021) e Mendonça et al. (2022). Testaram-se condições de agitação regular e irregular, com períodos de 10 s e 12 s, e alturas de onda de 1.5 a 2.0 m, para o nível de maré correspondente ao nível médio, NMM=+2.17 m (ZH). No seguimento daqueles trabalhos que, entretanto, finalizou, foram efetuados ensaios complementares considerando níveis de maré de preia-mar e de baixa mar. No presente trabalho descrevem-se os ensaios de hidrodinâmica realizados para estes 2 níveis de maré e analisa-se a influência de diferentes condições de agitação e níveis de maré nas condições de rebentação da onda e nos parâmetros de surfabilidade (amplificação de onda, comprimento da linha de rebentação e tipo de rebentação).
Year: 2022
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Duarte, F.; Reis, R.; Costa, C.E.B.C.; Caeiro, C.
Editor: 7as Jornadas de Engenharia Hidrográfica / 2as Jornadas Luso-Espanholas de Hidrografia
Keywords: Ensaios 3D; Vagueira; Surf; Quebra-mar destacado
|
Comunicação
Info
Numerical analysis of the influence of chamber sizes and turbine characteristics on an oscillating water column wave energy converter
Nowadays, renewable energy is a topic widely discussed in scientific community. Specifically wave energy attracts attention because it has a high energy potential distributed throughout the planet. Oscillating Water Column (OWC) wave energy converter is one of the most studied devices that have promising perspectives to be installed commercially. This study aims investigating the influence of chamber sizes and turbine characteristics dimensions of an OWC device located at the southern Brazilian coast is carried out. Numerical simulations for incident waves with period T = 7 s and 10 s and height H = 1.5 m, by using the FLUENT® model, based on the finite volume method (VFM) are carried out. Efficiencies for different chamber sizes and Wells turbine characteristic relations (kt) in each incident wave are determined. The highest efficiencies were obtained by a chamber with 5 x 5 m and kt = 530 Pa.s/m³ in the case of an incident wave with T = 7s (52%), and 30 x 30 m and kt = 15 Pa.s/m³ at T = 10s (65%).
Year: 2020
Number Pages:
9p.
Author(s): Wiener G.F.; Teixeira, P. R. F.; Didier, E.
Editor: ABCM - Brazilian Society of Mechanical Sciences and Engineering
Keywords: Pneumatic energy; Oscillating water column; Wave energy converter
Info
Risk forecast system for moored ships
Port terminals downtimes lead to large economic losses and largely affect the port
Year: 2020
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Santos, J. A.; Guedes Soares, C.
: Proceedings of virtual Conference on Coastal Engineering, 2020
Editor: University of Southern California, USA
Volume:
No 36v (2020).
Keywords: Azores; Ports; Waves; Moored ships; Forecast system
Info
Scale model tests of a moored tanker at leixões port with breakwater´s extension
This paper describes the physical model, experimental setup and tests performed to study the motions and forces of a ship moored to the pier A at the Leixões oil terminal, following the breakwater
Year: 2020
Author(s): Pinheiro, L.; Abdelwahab, H.S.; Santos, J. A.; Fortes, C. J. E. M.; Guedes Soares, C.
: Proceedings of virtual Conference on Coastal Engineering, 2020
Editor: University of Southern California, USA
Volume:
No 36v (2020).
Keywords: Experimental tests; Leixões; Physical scale model; Ports; Waves; Moored ships
Info
Simulation of hurricane Lorenzo at the port of Lajes das Flores, Azores, by using the HIDRALERTA system
HIDRALERTA is a forecast, early warning and risk assessment system for port and coastal areas that uses measurements and estimates of sea-waves and water levels to evaluate overtopping/flooding events. The calculation of the mean overtopping discharge over a maritime structure is performed through artificial neural network-based tools and/or empirical formulae. The system is developed in open source software, mainly using the Python language. This paper presents the application of HIDRALERTA system to reproduce the hurricane Lorenzo conditions and impacts at Lajes das Flores port on October 2nd 2019, the most affected port in Azores. This hurricane was regarded as the strongest storm to hit Azores in 20 years. The system predicted the expected results for the hurricane wave characteristics, as well as overtopping discharge volumes. Further validation still need to be improved with the collaboration of the local authorities and the use of historical data.
Year: 2020
Number Pages:
376-379pp.
Author(s): SANTOS, M.I.; Reis, M. T. L. G. V.; Pinheiro, L.; Fortes, C. J. E. M.; Zózimo, A. C.; Serrazina, V.; SALVADOR, M.; Azevedo, E. B.; Reis, F.
: Atas das 6.as Jornadas de Engenharia Hidrográfica / 1.as Jornadas Luso-Espanholas de Hidrografia
Editor: Instituto Hidrográfico
Keywords: Warning system; Overtopping; Lorenzo; Lajes das Flores; Hidralerta
Info
Testing storm impact modelling at São Pedro de Moel beach
Numerical models are useful tools to predict the effects of storms in coastal areas. The objective of this work was to simulate the effects of storms in São Pedro de Moel beach by using XBeach. The nearshore sea state was obtained by propagating offshore conditions using the SWAN model. The XBeach model was divided into two setups to analyse overtopping events and coastal evolution. Sensibility tests, calibration, and validation, using information from different storms, were performed for the different setups. The results from the overtopping simulation were compared against results from an empirical formula. The comparison showed lower values obtained with the empirical formula. The coastal evolution run point out to the necessity of having better field data before and after storms to improve the model setting and accuracy.
Year: 2020
Number Pages:
97-100pp.
Author(s): Cabrita, P.; Ferreira, A. M.; Fortes, C. J. E. M.; Ferreira, Ó.; Freire, P.
: Atas das 6.as Jornadas de Engenharia Hidrográfica / 1.as Jornadas Luso-Espanholas de Hidrografia
Editor: Instituto Hidrográfico
Keywords: XBeach; Overtopping; Empirical formula; Coastal storms; Coastal evolution
Info
Three-dimensional survey in scale model tests of rubble-mound breakwaters. Laser scanning and time of flight methodologies
The assessment of damage evolution in scale model tests of rubble-mound breakwaters can be achieved by comparing eroded depths and volumes between consecutive surveys. This paper focuses on damage evolution of a model of a rubble-mound breakwater and on the novelty of the non-intrusive survey methodologies such as laser scanning and Time of Flight (ToF) techniques, based on point clouds, enabling the extraction of profiles and the calculation of eroded depths and eroded volumes. The final objective of this work is to evaluate the applicability of the estimation the number of displaced armour units, using a non-dimensional damage parameter based on the calculated eroded volume.The paper will also describe the experiments conducted under the RODBreak, a project sponsored by the HYDRALAB+ Transnational Access Program, in which a stretch of a rubble-mound breakwater was built at the wave-current basin of the Leibniz University Hannover (LUH) to assess the structure behavior. Four scan surveys were conducted using a Faro Focus 3D laser scan, as well as a ToF sensor. Those surveys were carried out before and after two test series, in order to evaluate the eroded volume and profile evolution.
Year: 2020
Number Pages:
388-391pp.
Author(s): Lemos, R.; Santos, J. A.; Fortes, C. J. E. M.; Kerpen, N.B.
: Atas das 6.as Jornadas de Engenharia Hidrográfica / 1.as Jornadas Luso-Espanholas de Hidrografia
Editor: Instituto Hidrográfico
Keywords: Stability; Measuring techniques; Breakwater; 3D surveying
Info
Validação do protótipo do sistema To-SEAlert para o porto da Ericeira. Depressões Elsa e Fabien
Neste trabalho é efetuada a validação do protótipo To-SEAlert para o porto da Ericeira. Para a validação dos resultados do modelo SWAN foram utilizados os dados de duas boias situadas ao largo da Nazaré e para a validação das previsões do sistema de cálculo do grau de risco foram simuladas as depressões Elsa e Fabien (ocorridas em dezembro de 2019) e que foram responsáveis por fortes danos na cabeça do molhe do porto da Ericeira. Verificou-se uma boa concordância entre os dados das boias e os resultados do modelo SWAN, tendo no entanto o modelo reproduzido melhor a direção média e a altura significativa do que o período de pico. Relativamente aos valores de galgamento, os resultados obtidos na simulação das depressões Elsa e Fabien estiveram em concordância com os valores referidos na literatura como causadores de danos nas estruturas.
Year: 2020
Number Pages:
183-186pp.
Author(s): Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
: Atas das 6.as Jornadas de Engenharia Hidrográfica / 1.as Jornadas Luso-Espanholas de Hidrografia
Editor: Instituto Hidrográfico
Keywords: To-SEAlert; Galgamentos; Depressão Faien; Depressão Elsa; Alerta
Info
Wave energy assessment in Portugal potential locations for OWC installation
This work aims to determine the exploitable wave energy resource at six potential sites, located in the Azores, Madeira and Sines breakwater city harbours. For that purpose, the thirdgeneration wave model SWAN is used to estimate the sea-wave conditions over the last 40 years. Boundary conditions of the sea states and wind fields are provided by the climate reanalysis datasets (ERA5). Using those results as inputs to the SWAN model, the sea-states were propagated shoreward, in order to estimate and analyse the wave climate conditions in the regions of interest. By combining the average energy flux per unit-length of wave front and the probability of occurrence of each sea state, the average exploitable annual energy per unit length of wave crest can be computed. The variability of this energy flux is described, since it is of fundamental importance for the efficiency of the Wave Energy Converters (WEC).
Year: 2020
Number Pages:
396-399pp.
Author(s): Anastas, G.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.
: Atas das 6.as Jornadas de Engenharia Hidrográfica / 1.as Jornadas Luso-Espanholas de Hidrografia
Editor: Instituto Hidrográfico
Keywords: Exploitable energy; SWAN; Oscillating water column; Wave energy converter
Info
Wave run-up and overtopping in rubble-mound breakwaters under oblique wave incidence
Former investigations on wave run-up and overtopping of (impermeable and permeable) coastal structures aimed at quantifying the influence of oblique waves on mean overtopping discharge, water layer thickness and velocities by developing empirical formulas of a reduction factor for wave obliquity,
Year: 2020
Author(s): Reis, M. T. L. G. V.; Santos, J. A.; Fortes, C. J. E. M.; Lemos, R.; Carvalho, R.; Pohl, R.; BJORNSCHEIN, A.
Editor: University of Southern California, USA
Volume:
No 36v (2020).
Keywords: Rubble mond breakwaters; Overtopping; Wave runup
Info
Analysis of the incident sea-waves and of the consequent run-up in the RODBreak experiment
In 2017, the RODBreak experiment was conducted. The experiment aimed at characterizing wave run-up, overtopping and damage in rubble-mound breakwaters. The reason for these experiments was the huge impact that climate can have on maritime structures, particularly in rubble mound breakwaters. In fact, the forecast sea level rise associated with more frequent and severe storms will have consequences either on the increase of wave runup, wave overtopping or on damage on existent structures since they were not design for those extreme values. However, for those climate change scenarios, little is known about the actual failure probability of such structures.Within this framework, a stretch of a rubble-mound breakwater was built in a wave basin. Under extreme wave conditions, with different incident wave angles (from 40° to 90°), a total of 49 tests were performed. Each test had different testing parameters, such as significant wave height (Hs), peak period (Tp) and wave direction. Also, for each test, different types of measurements were considered. Incident sea waves were measured with 3 arrays of 6 acoustic wave probes each as well as with isolated acoustic wave probes and 5 Acoustic Doppler Velocimeters (ADV
Year: 2019
Number Pages:
152-157pp.
Author(s): Spans, J.H.; Santos, J. A.; Fortes, C. J. E. M.; Pinheiro, L.
Editor: EdiBios
Keywords: Run-up; RODBreak
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Demonstration and technical tours plan
A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project
Year: 2022
Author(s): Batista, F. A.; Marecos, V.; Antunes, M. L.; Macedo, A. L.; Freire, A. C.; Capitão, R.; Arsénio, E.; Maia, L.
Info
Demonstration submission and selection guidelines
The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.
Year: 2022
Author(s): Freire, A. C.; Arsénio, E.; Macedo, A. L.; Antunes, M. L.; Capitão, R.; Belinha, M.
Info
Technical tours organization criteria and procedures report
According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.
Year: 2022
Author(s): Capitão, R.; Macedo, A. L.; Arsénio, E.; Antunes, M. L.; Freire, A. C.
Editor: TRA LISBON 2022
Info
Data Repository Rules. Deliverable 10.4
This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.
Year: 2018
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data from physical modeling; Zenodo; Data repository structure
Info
Data Storage Report. RECIPE Task 8.2: Overtopping events in breakwaters under climate change scenarios
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.
Year: 2018
Author(s): Fortes, C. J. E. M.; Mendonça, A. C.; Lemos, R.; Neves, M. G.; Reis, M. T. L. G. V.; Capitão, R.
Keywords: Climate change; Overtopping; Data repository
Info
Facilitating the re-use and exchange of experimental data. Task 10.1 Critical review. D10.2 Critical Review of data flux between laboratory models, numerical models and field case studies
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled
Year: 2018
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Field data; Numerical modeling data; Physical modeling data; Data flux
Info
Facilitating the re-use and exchange of experimental data. Task 10.2 Data Standards and Licenses. D 10.3 Data Standards Report
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled
Year: 2018
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data management options; Experimental data; Data formats
Info
Protocols for representing variability and unsteadiness in flume facilities. Deliverable Number 8.2
This deliverable is related to task 8.2
Year: 2018
Author(s): Mendonça, A. C.; Fortes, C. J. E. M.; Lemos, R.; Capitão, R.; Neves, M. G.; Reis, M. T. L. G. V.
Keywords: Extreme events; Climate change; Variability in flume facilities
Info
Sistema de previsão, alerta e gestão de riscos causados pela agitação marítima - Relatório inicial Arquitetura e características gerais do sistema para os portos de Madalena do Pico, São Roque do Pi
Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.
Year: 2018
Author(s): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.
Keywords: Porto de Praia da Vitória; Porto de São Roque do Pico; Porto de Madalena do Pico; Agitação marítima; Alerta e gestão de riscos; Sistema de previsão
Info
ANÁLISE TEMPORAL DE REGISTOS DA ELEVAÇÃO DA SUPERFÍCIE LIVRE E DE VELOCIDADE EM ENSAIOS EXPERIMENTAIS
N/A
Year: 2014
Number Pages:
107p.
Author(s): Ramos, A.; Gabriel. S.; Simão, J.; Passarinho, A.; Lemos, R.; Fortes, C. J. E. M.
|
|
|
Outro
Info
Software do Núcleo de Portos e Estruturas Marítimas
N/A
Year: 2003
Author(s): NPE, Núcleo
Editor: ******
Info
River Information Services. PIANC s Technical Brief on vessel traffic and transport management in inland waterways and modern information systems
N/A
Year: 2002
Author(s): J.A Covas
Editor: ******
Info
Vessel Traffic and Transport Management in the Inland Waterways and Modern Information Systems
N/A
Year: 2002
Author(s): J.A Covas
Editor: ******
Info
MEDIRES - Ferramentas de Diagóstico e de Inspecção Robotizada de Estruturas Semi-Submersas
N/A
Year: 2001
Author(s): Santos, J. A.; Silvestre, C.
Editor: ******
Info
Observação Sistemática de Obras Marítimas. Súmula da actividade desenvolvida pelo LNEC
N/A
Year: 2001
Author(s): Silva, L. G.; Santos, J. A.; Neves, M. G.; Damião, A. D.
Editor: ******
Info
Protecção da Orla Costeira da Vila das Lajes do Pico. Relatório do Grupo de Trabalho para Definição e Análise de Soluções Alternativas
N/A
Year: 2001
Number Pages:
20 p.
Author(s): Oliveira, J. M. M.; Silva, L. G.; Azevedo, J. M.
Editor: ******
Info
Software do Núcleo de Portos e Praias
N/A
Year: 2001
Author(s): NPE, Núcleo
Editor: ******
Info
Solução Vectorizável e Parelelizável de Sistemas de Equações de Grande Dimensão Proposta para passagem à 2ª fase do projecto, financiado pela FCT, no âmbito dos Programas Operacionais Ciência, Tecnol
N/A
Year: 2001
Author(s): Fernandes, J. L. M.; Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
Transformações Não Lineares de Ondas Marítimas em Zonas Costeiras (2ª Fase). Proposta para passagem à 2ª fase do projecto, financiado pela FCT, no âmbito dos Programas Operacionais Ciência, Tecnologi
N/A
Year: 2001
Author(s): Covas, J. A.; Fortes, C. J. E. M.; Fernandes, J. L. M.; Oliveira, F. S. B. F.
Editor: ******
Info
Wave effects on Ships Moored at Figueira da Foz Harbour
N/A
Year: 2001
Author(s): Santos, J. A.; Neves, M. G.; Fortes, C. J. E. M.
Editor: ******
|