Publications

Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto

O projeto To-SEAlert tem como objetivo a inclusão de um conjunto de ferramentas/metodologias de modo a tornar o sistema HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) mais eficiente, fiável e robusto. Essas ferramentas incluem o uso de imagens de satélite e de vídeo, de modelação numérica e física, métodos quantitativos e probabilísticos para a avaliação do risco e planeamento de emergência, para melhorar a eficiência e a confiança no sistema, bem como proporcionar a sua validação. Este projeto tem como objetivo principal a implementação de um sistema que seja capaz de apoiar as autoridades responsáveis na monitorização, prevenção e gestão de situações de emergência. Este artigo apresenta o trabalho desenvolvido recentemente nas diferentes tarefas do projeto, entre o qual se pode destacar o desenvolvimento do protótipo do sistema para a zona costeira da Costa da Caparica, a validação do protótipo do porto da Ericeira com recurso a imagens de vídeo-monitorização, o teste de modelos numéricos para o cálculo do galgamento, e a implementação de metodologias de avaliação quantitativa das consequências do risco.

O SAFEPORT-SINES é um sistema de previsão e alerta para a segurança da navegação em zonas portuárias, englobando situações de emergência associadas a navios em trânsito ou amarrados, devidas a condições meteo-oceanográficas extremas. O sistema fornece previsões com 3 dias de antecedência da agitação marítima, das condições de vento e de maré, assim como dos movimentos dos navios, identificando as situações que possam ter consequências gravosas nos navios em manobra ou amarrados dentro do porto. Os níveis de risco associados baseiam-se em critérios de segurança e de operacionalidade, nomeadamente nos movimentos do navio e nos esforços nos elementos de amarração. Neste trabalho apresenta-se o sistema SAFEPORT em termos do seu desenvolvimento e arquitetura, do fluxo e tratamento de dados e do funcionamento dos modelos numéricos utilizados. Apresenta-se ainda o funcionamento da plataforma web e da aplicação móvel onde é possível consultar os parâmetros relevantes para aferir os riscos referidos

SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.

Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel

Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel

The To-SEAlert project (Fortes et al., 2021) aims to include a set of tools/methodologies into the Early Warning System HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) to make it more efficient, reliable and robust.

Marine fenders provide the necessary interface between berthing ships and berth structures (PIANC, 2002). Their absence can cause damage to either the quay or the ship or both the quay and the ship, endangering lives, and property. Due to the complex hydrodynamics around berthing ships, the characterization of the maximum force applied to an individual fender and the force distribution among a set of fenders is an essential factor in the design and safety of maritime structures and the fenders themselves, as well as for improving existing ones. This paper aims to describe a combining physical and numerical modelling of a ship impact on fenders, in order to improve the numerical modelling of this problem.Physical modelling represents a good practice in hydraulic studies, where a scale model is used to reproduce complex dynamic phenomena. However, the use of a sophisticated numerical model (or a package of numerical models) can provide a good means to evaluate the samecomplex physical processes and, in addition, to design and test a large number of alternatives in a short time span.Both types of models have their strengths and weaknesses (Gerritsen and Sutherland, 2011). Physical models provide a natural reproduction of complex non-linear physical phenomena, therefore they are well established and considered to be truthful. On the other hand, these models can be expensive and time consuming. In addition, one has to deal with the scale effect and measurement difficulties and errors are frequent. Numerical models in turn are very efficient to simulate rapidly many physical processes and the results can be easily extracted. On the other hand, to improve the reliability of their use in practice, it is necessary to calibrate several parameters through physical model measurements and field experiments. In order to take advantage of the potentiality of the two models emerged the composite modelling which is the integrated and balanced use of physical and numerical models (Gerritsen and Sutherland, 2011). This technique also costs but provides results with a better quality than those model techniques separately and increases the confidence in the use of numerical models.The physical modeling consists of a ship scaled model, whose impact on the fenders was performed in a wave basin. Various impact velocities and angles between the ship axis and the fenders alignment were used to represent possible collision conditions. The same conditions were reproduced by a numerical package. The numerical modeling was performed using MOORNAV (Santos, 1994), which estimates the ship motions and the forces exerted on the elements of the mooring system, namely mooring lines and fenders.

Esta comunicação diz respeito à fase de testes do sistema SAFEPORT, tendo-se avaliado o seu desempenho numa situação de tempestade. Trata-se de um sistema desenvolvido para a segurança da navegação do porto de Sines, e, mais concretamente, nos seus terminais de Granéis Líquidos, Multiusos e Contentores. Para estes terminais, simulou-se o impacto da tempestade Célia nos esforços nos cabos de amarração de um navio petroleiro, de um navio de carga geral e de um navio porta contentores, respetivamente. O sistema SAFEPORT demonstrou ser capaz de antecipar os efeitos nos navios amarrados dos estados de agitação associados à tempestade Célia.

The present project addresses a problem related to the erosion effects on a breakwater barrier due to waves which leads to its degradation and that may eventually lead to lack of functionality of the structure. In the present case, the breakwater acts as a physical barrier between the Atlantic Ocean and the cargo Harbour of Leixões, in Matosinhos, Portugal, justifying the needs of health monitoring of the barrier.To monitor this structure, with a length of roughly 700 m, the need of a fast data acquisition system led to the choice of imaging techniques which allow for a fast acquisition of a diversified data set. The images were acquired using a high-resolution camera attached to an unmanned aerial vehicle (UAV), enabling a faster and more automated procedure that leads to the systematization of the process, while being compatible with the difficult accessibility of the structure, which is surrounded by sea waves. Point clouds corresponding to the breakwater

O presente trabalho descreve a aplicação do modelo numérico COULWAVE ao estudo da propagação de ondas na zona da Praia do Lugar de Baixo, Madeira, com vista a simular as características hidrodinâmicas na zona de estudo permitindo analisar as alturas de ondas, zona de rebentação e reflexão da onda junto à costa. O objetivo final é propor soluções para a renaturalização desta zona e o melhoramento das condições de surf.

The objective of this paper is to describe and compare the use of different high-resolution survey techniques to create and analyse 3D surface models made up of point clouds, using open-source and freeware post-processing tools. Within this framework, several tests were conducted on a three-dimensional scale model of a breakwater, with surveys performed by a smartphone, the Microsoft® Kinect® sensor and a UAV camera. All the tests were conducted for a physical model placed in an empty wave tank. For this comparison, a number of post-processing software were used: the Microsoft Kinect Fusion Application, Visual SFM and MicMac, all freeware software. The clouds of points were compared using the CloudCompare freeware software and the Golden Software Surfer commercial software.In order to obtain a clear comparison between these tools (i.e., to better evaluate accuracy and associated errors), all the point clouds (with RGB colour information) were aligned with data coming from a survey used to coordinate some points in the model (Ground Control Points). All the clouds were compared with a corrected cloud based upon coordinated points painted on the concrete floor of the wave tank.The specific experimental conditions needed for using each of these methodologies were investigated and classified.

Nesta comunicação apresenta-se os novos desenvolvimentos que estão em curso no sistema SWAMS ALERT, que é um sistema previsão, alerta e avaliação de risco de eventos perigosos associados à navegação em áreas portuárias e ao comportamento dos navios amarrados.O sistema usa as características da agitação marítima previstas para determinar os seus efeitos em termos de forças em amarras e defensas, bem como de movimentos de um navio amarrado. Para isso, o sistema utiliza um conjunto de modelos numéricos. O sistema consiste em quatro módulos: I - Características da agitação marítima; II - Navegação em áreas portuárias; III - Avaliação de Risco e IV - Sistema de Alerta. A interface do sistema é através de uma plataforma web totalmente interativa e amigável.Ilustra-se a aplicação deste sistema ao porto da Praia da Vitória.

This paper presents recent new features of the Systematic Observation of Maritime Works (OSOM+) program, under development at LNEC since 1986, for using in an extensive number of maritime structures of mainland Portugal. Those functionalities are illustrated with applications to a real case scenario (the port of Ericeira) and by indicating their added-value on the existing methodology.

It is common for the local sea state in coastal waters to be a complex combination of waves due to local and recent wind (the "sea") and long period waves resulting from earlier weather systems, which have travelled many 100s of km with little attenuation of these very long waves (the "swell"). Sea and swell may have very different directions and periods.

This paper presents the validation of a wave maker with active absorption method implemented in FLUENT® RANS-VOF code for modelling long time series of waves propagating and interacting with coastal structures, more specifically, with Oscillating Water Column devices, to cancel out the reflected wave that reaches the wave maker. Verification of the numerical technique was performed in a 3D wave tank in which a technique of multiple active absorption wave makers was used. Good results were obtained in quasi-3D and fully-3D applications showing that active absorption should be used for modelling accurately the complex interaction between wave and coastal structures, in the present case, with an oscillating water column device integrated in a vertical breakwater.

Due to both its geographic location and maritime importance, Portugal is equipped with a large number of port infrastructures, the majority of which built for goals such as to guarantee the tranquility of the sheltered areas of the harbour basins, to help controlling sedimentation by guiding the currents, to protect water taken from thermoelectric plants, amongst others. In Portugal, the most common of these structures is the rubblemound breakwater. Due to its characteristics, maintenance or repair works are common throughout its lifetime. However, the need for these repair works should be evaluated in advance, in order to avoid significant costs associated to those works or, even worse, the collapse of the structure. It is therefore quite important to evaluate the Present Condition of the structure, as well its Evolution and Risk Conditions. The Present Condition is periodically checked on-site and all relevant data gathered is recorded, by filling in inspection forms, in order to perform further comparisons and analyses with previous inspections of the structure, as to eventually characterize Evolution and Risk conditions. To expedite all this process and prevent likely occurrence of errors in data collection, a monitoring tool, supported through a map-based online geographic information system (WebGIS) was developed, enabling the georeferencing of the structures concerned. This system adapts to the location of the user

The air entrainment effect on wave breaking is of the highest importance for the wave energy dissipation. Wave breaking is a complex phenomenon with several physical processes, making it difficult to quantify the contribution of the air in the energy dissipation process. This study presents a different approach where the wave propagation is exposed to air injected in the bottom of a wave flume. The experiment allows studying in a controlled environment the direct effect of the air bubbles in the wave propagation. The measurements show the free surface elevations and velocity profiles at two sections of the wave flume. The turbulence effect of the air injection on the wave propagation was evaluated. The results show differences for the three types of air injection that were tested. The air injection rate of each orifice is an important factor for the wave dissipation. The wave heights were found to decrease due to the air injection. The Turbulent Kinetic Energy shows an increase along the water column and on the downstream direction of the flume.

Apresenta-se nesta comunicação uma técnica baseada em análise de imagem para a medição e caraterização da concentração de ar produzida no processo de rebentação de onda. Para este efeito, realizaram-se filmagens dos ensaios num canal de ondas no Laboratório Nacional de Engenharia Civil (LNEC), que reproduzem dois tipos de rebentação de onda, progressiva e mergulhante. A validação da técnica de análise de imagem é feita por dois métodos, o primeiro com recurso à injeção de bolhas de ar através de uma bomba de ar e o segundo com a medição pontual da concentração de ar com uma sonda de deteção de bolhas de ar. Os resultados, relativos aos dois tipos de rebentação de onda, mostram as concentrações de ar e a distribuição da pluma de bolhas de ar. As medições realizadas permitem quantificar e caracterizar o ar emulsionado no processo de rebentação de onda.

Um dispositivo de aproveitamento da energia das ondas de tipo coluna de água oscilante (CAO) near-shore (que pode se assimilar a um cilindro vertical oco com a sua parte inferior aberta e a parte superior equipada com uma turbina Wells) implementada em profundidade intermédia pequena é estudado numericamente recorrendo a um modelo RANS-VOF 3D. O modelo numérico integra técnicas de geração e absorção das ondas por batedores múltiplos que permite dispor de um tanque de onda eficiente, eliminando as ondas reflectidas e difractadas. O dispositivo de CAO near-shore é um dispositivo alternativo ao clássico dispositivo integrado em quebra-mar ou na linha de costa e ao dispositivo off-shore (assimilado a um cilindro vertical oco estabilizado por um sistema de ancoragem por cabos) e tem duas vantagens: a resposta do dispositivo é independente da direcção das ondas e pode ser facilmente afundado no fundo do mar já que o dispositivo é desenhado para ser implementado em profundida pequena (~20 m). No entanto, a proximidade do fundo e a interacção complexa onda-estrutura resultante podem interferir em termo hidrodinâmico e energético na resposta do dispositivo CAO near-shore, comparativamente a um dispositivo off-shore. O artigo apresenta os primeiros resultados deste projecto através da análise pormenorizada de um caso de agitação marítima. Também, permite evidenciar e prever respostas diferentes do dispositivo CAO near-shore de um dispositivo clássico off-shore através da analise das series temporais de elevação de superfície livre, do caudal na turbina, da pressão na câmara-de-ar da CAO, da potência pneumática e dos vectores e campos de velocidade e de vorticidade ao redor e dentro do dispositivo.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A