Papers
Info
Extensão do molhe norte do Porto de Leixões: modelação física de um navio amarrado no posto A
O Porto de Leixões, localizado na costa norte de Portugal, é um dos maiores do país, recebendo diariamentevários navios de grandes dimensões. Um dos principais postos de acostagem situa-se à entrada do porto e encontra-se sujeito à agitação marítima que é difratada pelo olhe principal de proteção do porto. Para avaliar dos movimentos induzidos no navio estacionado nesse posto de acostagem e as forças exercidas nas suas amarras e defensas pela agitação incidente, utilizou-se o modelo físico de Leixões, construído num dos tanques do LNEC. Neste modelo físico, encontra-se representada a envolvente do porto de Leixões, assim como a sua batimetria. O modelo do navio
Year: 2020
Number Pages:
17-28pp.
Author(s): Pinheiro, L.; Pedro, F.; Abdelwahab, H.S.; Fortes, C. J. E. M.; Santos, J. A.; Capitão, R.
: Revista Recursos Hidricos
Editor: APRH
Volume:
Volume 41, Nº 1.
Keywords: Motions measurement; Constitutive relations; Moored ship; Scale model
Info
Numerical analysis of an onshore oscillating water column wave energy converter for different wall slopes
An alternative to the energy matrix expansion, due to the increase of global electricity demand, is the renewable sea wave energy source, which has high energy potential. The Oscillating Water Column (OWC) converter is one of the most studied, although it is not yet used at commercial scale. Therefore, searching the optimal geometric configuration is fundamental to turn this device viable. This study proposes a numerical analysis of an onshore OWC for different slopes of chamber walls (from 40o to 90o) and equipped with a Wells turbine. Simulations of incompressible 2D flows are performed by means of the FLUENT® software, which is based on Reynolds-averaged Navier-Stokes (RANS) equations. The k-
Year: 2020
Number Pages:
10-22pp.
Author(s): Güths, A.K.; Teixeira, P. R. F.; Didier, E.
: Revista Interdisciplinar de Pesquisa em Engenharia
Editor: RIPE
Volume:
Volume 6 No. 2.
Keywords: Numerical simulation; Renewable energy; Wave energy; Oscillating water column
Info
Numerical analysis of the influence of air compressibility effects on an oscillating water column wave energy converter chamber
The most studied device used for extracting wave energy is the Oscillating Water Column (OWC). In general, numerical simulations of these cases by means of models based on Reynolds Averaged Navier-Stokes equations adopt the Volume of Fluid method to deal with the free surface flow which is considered incompressible in both water and air. The aim of this study is to investigate the influence of the compressibility effect on the air inside the OWC chamber by the FLUENT® numerical model. A methodology is implemented, taking into account both water and air flows incompressible, but, at every instant, a pressure condition is imposed on the top boundary of the chamber to consider the compressibility effect. This pressure condition is based on an analytical equation that considers the isentropic transformation of the air and effects of Wells and impulse turbines. Results of compressible and incompressible numerical models are compared. The amplification factor, the root mean square of air pressure inside the chamber and OWC efficiency in relation to incident wave period, wave height and turbine characteristic relation are analyzed. Results show that air compressibility effects can diminish the predicted OWC efficiency up to about 20% in both Wells and impulse turbines.
Year: 2020
Number Pages:
1183-1193pp.
Author(s): Gonçalves, R.; Teixeira, P.; Didier, E.; Torres, F.
Editor: Elsevier
Volume:
Volume 153.
Keywords: Air compressibility; Volume of fluid; Numerical simulation; Oscillating water column device; Wave energy
Info
Numerical analysis of the performance of two onshore oscillating water column wave energy converters at different chamber wall slopes
In this study, a numerical analysis of the performance of two Oscillating Water Column (OWC) wave energy converters, at different front and back wall slopes, was carried out. The first device had vertical front and back walls and the second one had its wall slopes of 40° in relation to the horizontal plane. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes (RANS) equations, was used. The Volume of Fluid (VoF) method was employed to take into account free surface flows. The case study comprised a 10 m deep flume with an onshore OWC at its end, equipped with a Wells turbine. A 2D hydrodynamic mathematical model was employed and a 3D air pressure effect inside the OWC air-chamber was considered. Analyses of the hydrodynamics behavior, fluid-structure interaction outside (run-up/down, reflected waves) and inside the chamber (free surface elevation, sloshing) and energy distribution (pneumatic extracted energy, reflected wave energy and energy losses) were conducted. Results showed that the device with inclined walls had the best efficiency in comparison with the other one. However, the latter showed lower variation in efficiency in the wave period range than the former.
Year: 2020
Number Pages:
14p.
Author(s): Gaspar, L. A.; Teixeira, P.; Didier, E.
: Revista Ocean Engineering
Editor: Elsevier
Volume:
Volume 201.
Keywords: Volume of fluid; Finite volume method; Numerical simulation; Oscillating water column device; Wave energy
Info
Numerical analysis of the response of an onshore oscillating water column wave energy converter to random waves
The main objective of this study is to investigate differences of random incident waves from regular ones in performance of wave energy converters (WEC). A numerical analysis of an onshore oscillating water column (OWC) WEC is carried out by means of the FLUENT® software, which is based on Reynolds - Averaged Navier-Stokes equations. Analyses of the efficiency of an onshore OWC device with similar characteristics of the Pico
Year: 2020
Number Pages:
12p.
Author(s): Teixeira, P. R. F.; Didier, E.
: Revista Energy
Editor: Elsevier
Volume:
Volume 220.
Keywords: Irregular/Random waves; RANS-VoF; Wells turbine; Oscillating water column; Wave energy
Info
O papel da engenharia na proteção do território e das suas gentes
Atualmente, mais importante que assegurar a resistência de um aglomerado urbano a um eventual invasor, importa garantir a sobrevivência a catástrofes naturais das infraestruturas críticas que garantem a salubridade das condições de vida nesse aglomerado, a mobilidade dos habitantes e o abastecimento de bens essenciais. Em rigor, face ao carater aleatório destas solicitações, pretende-se que, uma vez terminadas essas solicitações extremas, eventuais estragos causados pelas mesmas não impeçam o restabelecimento, em tempo útil, das atividades normais da população. Nesta comunicação apresentam-se ferramentas e procedimentos para avaliação do risco associado a infraestruturas críticas com um viés para o controlo de cheias urbanas e de infraestruturas de transporte marítimo.
Year: 2020
Number Pages:
201-221pp.
Author(s): Santos, J. A.; Pinheiro, L.; Fortes, C. J. E. M.
: Madeira Região Resiliente. Aprender com o Passado. Série Estudos Cindínicos
Editor: RISCOS - Associação Portuguesa de Riscos, Prevenção e Segurança
Volume:
Volume 9 (2020).
Keywords: Avaliação do risco; Resiliência; Infraestruturas críticas
Info
Sines breakwater harbour: the OSOM+ monitoring program
The current program of Systematic Observation of Maritime Works (OSOM+), under development at the National Laboratory for Civil Engineering (LNEC), is essentially applied to rubble mound breakwaters. The OSOM
Year: 2020
Number Pages:
49-57pp.
Author(s): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Silva, L. G.; Henriques, M. J.; Martins, T.
: Italian Journal of Engineering Geology and Environment
Editor: Sapienza Università Editrice
Volume:
1 (2020).
Keywords: Drone; Visual observations; Maintenance; Monitoring; Rubble mound breakwaters
Info
The HIDRALERTA system: Application to the ports of Madalena do Pico and S. Roque do Pico, Azores
HIDRALERTA is a forecast and early warning system for coastal and port regions capable of predicting emergency situations, as well as carrying out risk assessment. The system concentrates on evaluating wave overtopping and flooding scenarios. It uses offshore sea-wave and wind forecast data, as well as tide data, as input to determine wave overtopping at specific locations. The calculation of the mean overtopping discharge over a structure is made through artificial neural network (ANN) tools and/or empirical formulae, which are able to define the spatial distribution of the flow behind the structure.The HIDRALERTA system is composed of four modules developed in Open Source Web Technology, mainly using the Python Language. The Warning System can be configured and adapted for specific scenarios. The system has been successfully tested for the Port and Bay of Praia da Vitória, Terceira Island, Azores, Portugal, and is now under development and being implemented at the ports of Madalena do Pico and S. Roque do Pico.This paper describes the work carried out to date on the system and its application to these two ports in the Pico Island, Azores.
Year: 2020
Number Pages:
10p.
Author(s): Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Pinheiro, L.; Poseiro, P.; Serrazina, V.; Mendonça, A. C.; SMITHERS, N; SANTOS, M.I.; Barateiro, J.; Azevedo, E. B.; SALVADOR, M.; Reis, F.
: Revista Aquatic Ecosystem Health & Management
Editor: Taylor & Francis
Keywords: Warning system; Flooding; Wave overtopping
Info
3-D scale model study of wave run-up, overtopping and damage in a rubble-mound breakwater subject to oblique extreme wave conditions
A set of scale-model tests carried out to enlarge the range of wave steepness values analysed in run-up, overtopping and armour layer stability studies, focusing on oblique extreme wave conditions and on their effects on a gentler slope breakwater
Year: 2019
Number Pages:
32-41pp..
Author(s): Santos, J. A.; Pedro, F.; Coimbra, M.; Figuero, A.; Fortes, C. J. E. M.; Sande, J.; Körner, M.; Lemos, R.; Bornschein, A.; Weimper, J.; van den Bos, J.; Dost, B.; Hofland, B.; Carvalho, R.; Alvarellos
: Defect and Diffusion Forum
Editor: Trans Tech Publications Ltd, Switzerland
Volume:
Volume 396.
Keywords: Instrumentation; 3D-Wave basin; Physical modelling
Info
A numerical tool for modelling oscillating wave surge converter with nonlinear mechanical constraints
Mechanical constraints have a non-negligible influence in the motion of oscillating wave surge converter (OWSC) devices. The key novelty of this paper is a numerical simulation tool for OWSCs that does not neglect or significantly compromise mechanical constraints such as hydraulic power take-off (PTO) system, revolute joints and frictional contacts among components. The paper is aimed at presenting the key components of the numerical simulation tool and at validating it with laboratory data featuring an OWSC with mechanical constraints under regular and irregular waves. It is based on the implementation of the multibody solver of Project Chrono under the Smoothed Particle Hydrodynamics (SPH) model of DualSPHysics, where the SPH solver resolves the interaction between wave and flap and the multibody solver resolves the interaction between flap and mechanical constraints. Comparison between numerical results and experimental data show that the numerical simulation tool properly predicts the dynamics of the OWSC. Furthermore, in what concerns hydrodynamics of the near-flap flow, the computed and measured free-surface elevations and phase-averaged flow field show reasonable agreement. Once properly validated, the numerical simulation tool is then applied to study the influence of several mechanical constraints, PTO damping characteristics and flap inertia on the hydrodynamic of the OWSC. The viability of OWSC design solutions based on the developed numerical simulation tool is emphasised, in view of its performance in the test cases to which it was subjected.
Year: 2019
Number Pages:
2024-2043pp.
Author(s): Brito, M.; R. Canelas; García-Feal, O.; Domínguez, J. M.; Crespo, A. C.; Ferreira, R. L.; Neves, M. G.; Teixeira, L.
: Renewable Energy
Editor: Elsevier
Volume:
146.
Keywords: Wave-structure interaction; Wave energy; Mechanical constraints; Oscillating wave surge converter (OWSC); Smoothed particle hydrodynamics (SPH); Numerical modelling
|
Comunicação
Info
Análise vídeo para a determinação do espraiamento e do galgamento em modelos físicos de quebra-mares
O objetivo do presente trabalho foi avaliar o desempenho da metodologia de análise de vídeo Timestack na estimativa do espraiamento e na identificação de eventos de galgamento em modelos físicos de quebra-mares de talude com manto resistente composto por cubos Antifer.No primeiro caso, foi avaliado o espraiamento num modelo físico tridimensional do quebra-mar de taludes, para condições de agitação com incidência frontal e oblíqua relativamente ao talude. No segundo caso, identificaram-se os eventos de galgamento considerando ensaios realizados num modelo físico bidimensional do quebra-mar de taludes. Todos os casos de teste realizados mostraram resultados muito satisfatórios, evidenciando a versatilidade da técnica.
Year: 2023
Number Pages:
4p..
Author(s): Lemos, R.; Fortes, C. J. E. M.; Mendonça, A.C.; Andriolo, U.
Editor: PIANC
Keywords: Galgamento; Espraiamento; Análise de video; Timestack
Info
Analysis of run-up and overtopping in coastal protection structures: video-monitoring techniques
Marginal protection structures or adherent longitudinal defenses, whose main function is to mitigate overtopping, are structures parallel to the coast. They are intended to serve as protection and shelter against flooding, due to overtopping, dissipating wave energy in their interaction with the structure, and in areas strongly affected by coastal erosion, minimizing the risk of damage to roads, walkways or buildings in the proximity.The evaluation of run-up and overtopping in marginal protection structures is determined according to the conditions of incident sea agitation and the characteristics of the structure, being fundamental for the design of new structures and in the verification of the safety of existing structures.
Year: 2023
Author(s): Mendonça, A.C.; Lemos, R.; Fortes, C. J. E. M.; MARTINS, R.; Ferrão, R.; Jónatas, R.
Editor: IAHR
Keywords: Overtopping; Run-up; Marginal protection
Info
Aplicação do Safeport no porto de Sines durante a tempestade Dora
O SAFEPORT é um sistema de previsão e alerta de perigos associados a navegação dentro do Porto de Sines. Este documento apresenta uma aplicação deste sistema, mais especificamente, descreve a modelação numérica que permitiu simular o comportamento de três navios amarrados em três terminais do Porto de Sines, sob as condições de agitção marítima causadas pela tempestade Dora. Os alertas emitidos aos movimentos dos navios e às forças exercidas nos seus cabos de amarração permitiram concluir que o sistema SAFEPORT é capaz de prever e emitir alertas em situações potencialmente perigosas.
Year: 2023
Number Pages:
208-210pp.
Author(s): Gomes, A.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Guedes Soares, C.
Editor: APRH
Keywords: Tempestade Dora; Navios amarrados; SAFEPORT; Propagação de ondas; Modelos numéricos
Info
Assessment of 3D reconstruction techniques in physical models
Damage progression in wave-exposed physical models of rubble-mound breakwaters can be assessed using two methods: traditional quantification of armor element movements or newer approaches involving non-intrusive surveys, utilizing photogrammetry, RGB sensors, Time of Flight depth sensors, and LiDAR laser scanning sensors to determine eroded volumes and depths between consecutive armor layer surveys. These techniques allow for the creation of three-dimensional surface models with varying accuracy, depending on survey conditions and post-processing methodologies. The performance, suitability, and usability of these techniques in assessing damage progression are comparatively evaluated. Furthermore, the advantages and disadvantages of each technique are identified, and a sensitivity analysis is presented for each one.
Year: 2023
Number Pages:
70-70pp.
Author(s): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Jónatas, R.
Editor: Yildiz Technical University
Keywords: Damage quantification; 3D reconstruction; Surveys; Physical modeling
Info
Avaliação da estabilidade do quebra-mar destacado do Porto Inglês
No âmbito do projeto das obras de expansão e requali
Year: 2023
Number Pages:
245-247pp..
Author(s): Soares, R. E.; Fortes, C. J. E. M.; Lemos, R.; Costa, C.E.B.C.; Silva, L. G.; Pinheiro, L.; Neves, M. G.
Editor: APRH
Keywords: Accropodes II; Dano; Agitação
Info
Avaliação de desempenho de técnicas de reconstituição 3D aplicadas a modelos físicos de quebra-mares
A avaliação da evolução dos danos causados pela agitação incidente em modelos físicos de quebra-mares de taludes pode ser efetuada através da quantificação de movimentos e quedas dos elementos do manto resistente (métodos tradicionais), ou pela determinação de volumes e profundidades erodidas entre levantamentos consecutivos dos respetivos taludes (métodos mais atuais). Para se efetuarem esses levantamentos dos taludes, podem aplicar-se técnicas fotogramétricas com sensores RGB, sensores de profundidade baseados na metodologia ToF (Time of Flight) e sensores de laser LiDAR (Light Detection And Ranging).No presente trabalho, aplicam-se essas técnicas ao modelo físico do quebra-mar do porto da Ericeira, que está presentemente a ser ensaiado no LNEC, e avalia-se, comparativamente, o respetivo desempenho, adequabilidade e usabilidade na determinação da evolução dos danos, identificando vantagens e desvantagens de cada uma destas técnicas.
Year: 2023
Number Pages:
4p..
Author(s): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Jónatas, R.
Editor: PIANC
Keywords: Quantificação de danos; Reconstituição 3D; Levantamentos; Modelação física
Info
Cálculo do galgamento na praia da Vagueira utilizando o modelo SWASH
A praia da Vagueira está localizada no Município de Vagos, distrito de Aveiro e é protegida por uma estrutura de defesa frontal aderente que foi requali
Year: 2023
Number Pages:
222-224pp..
Author(s): CORREIA, J.; Neves, M. G.; Zózimo, A. C.; ROSA, G.
Editor: APRH
Keywords: Barra-fossa; Modelo numérico; Espraiamento
Info
Evolução do dano do manto protetor do quebra-mar de talude do porto da Ericeira: análise probabilística
O projeto
Year: 2023
Number Pages:
321-323pp..
Author(s): Mendonça, A.C.; MACHADO, B.; Reis, M. T. L. G. V.; Santos, J. A.; Fortes, C. J. E. M.; Lopes, N.D.J.; Prior A.F.M.S.P.
Editor: APRH
Keywords: Modelo de previsão da evolução do dano; Latin Hypercube Sampling; Métodos estatísticos; Estabilidade de mantos; BASAFE4SEA
Info
Evolução do dano em modelos físicos de quebra-mares de talude a partir do volume erodido. Aplicações
A avaliação do dano causado pela agitação incidente em modelos físicos de quebra mares de taludes pode ser realizada comparando volumes e profundidades erodidas entre levantamentos consecutivos de cada talude. Atualmente, estes levantamentos podem ser realizados de forma não intrusiva, recorrendo a técnicas fotogramétricas, a laser scan ou a sensores de posição baseados na metolodologia Time of Flight (ToF). Dependendo das condições de levantamento e da metodologia de pós-processamento das nuvens de pontos obtidas, estas técnicas permitem obter modelos tridimensionais de superfície, com elevada precisão.
Year: 2023
Number Pages:
67-68pp..
Author(s): Lemos, R.; Mendonça, A.C.; Fortes, C. J. E. M.; MARTINS, R.; Ferrão, R.
Editor: APRH
Keywords: Porosidade do manto; Kinect; Modelos tridimensionais de superfície; Modelo físico; Quebra-mar
Info
HIDRALERTA system - Aveiro harbour
This paper presents the prototype of HIDRALERTA for the port of Aveiro, showing the potential of the system, both as a tool for forecasting and warning of emergency situations and as a tool for planning and managing the risk in climate change scenarios. The prototype for Aveiro harbour showcases a new feature of HIDRALERTA system, which is the early warning system for maneuvering ships along the entrance channel, following the work of the BlueSafePort project.
Year: 2023
Number Pages:
105-105pp..
Author(s): Fortes, C. J. E. M.; Pinheiro, L.; Zózimo, A. C.; KLEINJAN, M.
Editor: Yildiz Technical University
Keywords: Ships; Maneuvering; Harbour; Early warning System; HIDRALERTA
|
|
Capítulo de Livro
Info
Multi-functional artificial reefs for coastal protection
N/A
Year: 2009
Number Pages:
153-210 pp.
Author(s): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Tese de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Year: 1999
Number Pages:
159 p.
Author(s): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Year: 1998
Number Pages:
594 p.
Author(s): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Year: 1998
Number Pages:
346 p.
Author(s): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Year: 1973
Author(s): Carvalho, M. M.
Editor: ******
|
|
Relatório Científico
Info
Missão à Holanda (24 a 27 de Agosto de 1991) do "Team leader" da tarefa A3-3.
N/A
Year: 1991
Author(s): Carvalho, M. M.
Info
Missão ao Reino Unido. Universidade de Liverpool.
N/A
Year: 1991
Author(s): Capitão, R.
Info
Missão do responsável pela tarefa B3 ao Delft Hydraulics (4 de Dezembro de 1990) e ao Danish Hydraulic Institute (6 de Dezembro de 1990).
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto da Baleeira.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto da Ericeira.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento do quebra-mar de protecção do porto de Sesimbra.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento dos quebra-mares de protecção do porto da Nazaré.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Observação sistemática de obras marítimas. Estudo do comportamento dos quebra-mares de protecção do porto de Peniche.
N/A
Year: 1991
Author(s): Silva, L. G.; Reis, M. T.
Info
Reforço do molhe do porto da Horta. Ensaios bidimensionais de estabilidade e galgamentos do perfil-tipo 2.
N/A
Year: 1991
Author(s): Silva, L. G.
Info
Reforço do molhe do porto da Horta. Ensaios bidimensionais de estabilidade e galgamentos.
N/A
Year: 1991
Author(s): Silva, L. G.
|
|
|
Outro
Info
Avaliação da Estabilidade do Quebra-Mar Destacado do Porto Inglês (Ilha do Maio
Realização de ensaios em modelo físico reduzido 3D para a avaliação da estabilidade do quebra-mar destacado do Porto Inlgês, Maio, Cabo-Verde
Year: 2023
Author(s): Soares, R. E.; Fortes, C. J. E. M.; Lemos, R.; Costa, C.E.B.C.; Silva, L. G.; Pinheiro, L.; Neves, M. G.
Info
Physical modelling of wave-induced plant drag coefficient
N/A
Year: 2019
Author(s): Reis, R.; Suzuki , T.; LUBBERS, B.; Fortes, C. J. E. M.; Pires Silva, A.
Keywords: Flume experiments; Wave propagation; Plant flexibility; Vegetation
Info
Evaluation of wave overtopping consequences for risk assessment using ANP methodology
Adverse sea conditions can cause emergency situations associated to wave overtopping, which endanger the safety of people and goods, with negative impacts for society, the economy and the environment. Therefore, a methodology to assess the overtopping risk in port and coastal areas is essential for a proper planning and management of these areas.The Portuguese National Laboratory for Civil Engineering (LNEC) has been developing the HIDRALERTA system, an integrated decision-support tool for port and coastal management, which focus in preventing and supporting the management of emergency situations and the long-term planning of interventions in the study areas. It enables the user to calculate the risk for various port and coastal activities, starting with the characterization of sea-waves, wind field and tide levels at the study regions.HIDRALERTA was already tested at different places in Portugal: Costa da Caparica beach, in Almada, and port of Praia da Vitória, in the Azores. However, in both cases, the evaluation of wave overtopping / flooding consequences was carried out using a quite simple approach. In fact, such consequences were assessed only at a global and qualitative level, based on information provided by the responsible authorities.This paper aims at testing a quantitative methodology to evaluate overtopping consequences: the Analytic Network Process (ANP). This methodology was proposed to solve complex decision-making problems and its objective is to calculate the priorities among decision elements which will define their final weights on the consequences. The ANP approach can produce interdependencies between criteria and compute the respective weight of each criterion. Such a network model with dependence and feedback improves the priorities derived from judgements and makes prediction more accurate. So, the ANP allows comparison among clusters of elements. Furthermore, in this methodology we take into account the impacts of alternatives on the importance of criteria, by normalizing the comparison matrix. Thus, the given alternatives can influence the ranking of criteria.Application of the ANP methodology to the case study of Praia da Vitória port is presented and a consequences level map is obtained.
Year: 2016
Author(s): Lourenço, I.; Santos, J. A.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.; Craveiro, J.
Keywords: Praia da Vitória port; Analytic Network Process (ANP); Risk; Wave overtopping
Info
Sistema de alerta para a navegação em portos
Apresenta-se um novo sistema de alerta para navios amarrados em portos que se encontra em desenvolvimento no Laboratório Nacional de Engenharia Civil. O sistema SWAMS_ALERTA é um sistema de previsão e alerta baseado na avaliação do risco associado ao comportamento de navios amarrados em zonas portuárias.Os riscos associados a navios amarrados decorrem de movimentos excessivos, quer no plano horizontal, quer no plano vertical. Estes movimentos podem condicionar as atividades portuárias, nomeadamente cargas e descargas, mas em casos extremos podem levar à ocorrência de situações de emergência, tais como rotura de cabos, rotura de cabeços de amarração ou até colisões com o cais. As consequências deste tipo de situações envolvem sempre grandes prejuízos materiais e por vezes humanos.O sistema SWAMS_ALERTA utiliza as medições e previsões de agitação marítima para a determinação dos seus efeitos em termos de movimentos nos seis graus de liberdade e forças nas amarras e defensas quando o navio se encontra estacionado no cais. Para tal, o sistema recorre a uma série de modelos numéricos, interligados entre si. A comparação destes valores com valores máximos admissíveis pré-estabelecidos permite a avaliação, em tempo real, de situações de emergência e a emissão de alertas dirigidos às entidades portuárias.O sistema é constituído por 4 módulos:I
Year: 2016
Author(s): Pinheiro, L.; Lopes, P.; Fortes, C. J. E. M.; Santos, J. A.
Keywords: Navios amarrados; Riscos; Sistema de previsão e alerta
CONSTRUÇÃO DA EXPANSÃO DO PORTO DE SAL-REI 1ª FASE (ILHA DA BOAVISTA CABO VERDE) Ensaios bidimensionais em modelo reduzido Parecer Técnico
Info
Definição da Geometria para um Recife Artificial Multifuncional em Leirosa (Poster)
N/A
Year: 2010
Number Pages:
1.
Author(s): Neves, M. G.; Antunes do Carmo, J.
Editor: Gestão Costeira: Vulnerabilidades e Riscos na Região Centro
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual Report of pOST-dOCTORAL rESEARCH
N/A
Year: 2005
Author(s): Reis, M. T. L. G. V.
Editor: ******
Info
Guidelines and Recommendations for River Information Services - PIANC
N/A
Year: 2004
Author(s): J.A Covas
Editor: ******
Info
Porto Santo Island. Wave Characterization and propagation. poster apresentado ao International Coastal Symposium (ICS 04)
N/A
Year: 2004
Author(s): Fortes, C. J. E. M.
Editor: ******
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual report of Post-Doctoral Research.
N/A
Year: 2004
Author(s): Reis, M. T. L. G. V.
Editor: ******
|