Publications

This paper aims to evaluate the impact of ships on fenders during the berthing process. Physical tests and numerical simulations with MOORNAV tool were performed with versions of the GulfStream ship in still water and under a set of different conditions. A comparative analysis was made between outputs of the two models considering specific conditions. The MOORNAV application resulted in a standard deviation from the physical model of 3% to 6% in relation to the maximum force exerted on each fender.

This paper describes a numerical evaluation of optimal sizes of a Wells turbine and chamber cross section to be used in a cluster of an oscillating water column (OWC) wave energy converter device. The FLUENT numerical model, based on the Reynolds

This paper describes a numerical evaluation of optimal sizes of a Wells turbine and chamber cross section to be used in a cluster of an oscillating water column (OWC) wave energy converter device. The FLUENT numerical model, based on the Reynolds

A numerical model of a dual-chamber Oscillating Water Columns (OWC)Wave Energy Converter (WEC) is built through the DualSPHysics software. Thiscode is based on the Smoothed Particle Hydrodynamics (SPH) model, a Lagrangianmeshless method where particles represent the flow, interact with structures, andexhibit large deformation with moving boundaries. A one phase approach

Neste trabalho, descreve-se a aplicação do programa OSOM+ às obras marítimas do Porto de Sines, em especial ao quebra-mar oeste. Assim, serão apresentados resultados de comparação entre as situações observadas em 2018 e 2020 no âmbito de inspeções visuais e com drone, mediante apreciação e análise de fotografias georreferenciadas, ortomosaicos, nuvens de pontos, modelos numéricos de superfície e perfis selecionados. É também ilustrada a forma como a aplicação e base de dados ANOSOM-WEB pode ser empregue quer durante as campanhas de observação, quer em gabinete. Conclui-se este trabalho com a apresentação das vantagens da recente atualização da metodologia e do que se julga ser a sua importância na tomada de decisões sobre a necessidade ou não de realizar obras de manutenção e/ou reparação nestas estruturas, ou similares

The National Laboratory of Civil Engineering (Portugal) is undertaking a characterization and feasibility study of a multifunctional submerged detached breakwater (SDB) in front of Praia da Vagueira, in the central West coast of Portugal, for the Portuguese Environment Agency, I.P. (APA). It is intended that the SDB is multifunctional, contributing to create conditions to promote surfing waves, boosting the economy associated with this activity in the area. A physical and numerical modeling study was developed to investigate the influence of a SDB (considering the SDB parallel to the coastline, SDB 0º, and the SDB with a 45º angle to the coastline, SDB 45º) in the surfing conditions on the study area. The results show that: without structure, a spilling wave breaker occurs near the coastline, with peel angles adequate for beginners; for the SDB 0º a plunging wave breaks along the structure, with small peel angles, not adequate for surfing; and for the SDB 45º a plunging wave breaks over and past the structure, with peel angles between 40º-50º, promoting surfing conditions for intermediate and professional surfers.

A previsão de galgamentos e inundações em zonas costeiras baseadas em metodologias numéricas, é fundamental para a garantia da segurança de pessoas e bens e para a gestão integrada da zona costeira.

Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto

Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto

O projeto To-SEAlert tem como objetivo a inclusão de um conjunto de ferramentas/metodologias de modo a tornar o sistema HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) mais eficiente, fiável e robusto. Essas ferramentas incluem o uso de imagens de satélite e de vídeo, de modelação numérica e física, métodos quantitativos e probabilísticos para a avaliação do risco e planeamento de emergência, para melhorar a eficiência e a confiança no sistema, bem como proporcionar a sua validação. Este projeto tem como objetivo principal a implementação de um sistema que seja capaz de apoiar as autoridades responsáveis na monitorização, prevenção e gestão de situações de emergência. Este artigo apresenta o trabalho desenvolvido recentemente nas diferentes tarefas do projeto, entre o qual se pode destacar o desenvolvimento do protótipo do sistema para a zona costeira da Costa da Caparica, a validação do protótipo do porto da Ericeira com recurso a imagens de vídeo-monitorização, o teste de modelos numéricos para o cálculo do galgamento, e a implementação de metodologias de avaliação quantitativa das consequências do risco.

Coastal vegetation can contribute to protect the coasts from sea wave action, as controlling local biology and morphodynamics. A common way to estimate the wave energy dissipation over vegetation is to use the Mendez and Losada (2004) analytical formulation in combination with the calibrated bulk drag coefficient parameter (CD). However, an excessive range of CD values is found in the literature related to same Reynolds (Re) or Keulegan-Carpenter (KC) numbers. This may be due to a lack of universality of the empirical equations proposed and/or limitations of the analytical model. The numerical model SWASH (Zijlema et al., 2011) characterises wave dissipation over vegetation fields (Suzuki et al., 2019, 2022; Reis et al., 2020) considering the influence of the drag, inertia, and porous effects on cylindrical structures. Potentially, SWASH offers enhanced capacities to describe the physical processes involved and to calibrate associated CD values. Wave dissipation over vegetation data was collected by performing laboratory flume experiments, enabling an ideal control of the study conditions. The analytical formulation and the SWASH numerical model are applied to estimate the wave dissipation obtained in the experiments, through the calibration of the CD.The objective of this study is to investigate: i) how the analytical and SWASH models can represent the experimental wave dissipation, and ii) the calibrated CD values obtained from each modelling approach.

Downtime of port terminals results in large economic losses and has a major impact on the overall competitiveness of ports. Early Warning Systems (EWS) are an effective tool to reduce ports

Aquatic vegetation in the littoral zone, particularly seagrass, is gaining increasing recognition for its net positive impact on the hosting environment. This recognition is rooted in its capacity to absorb wave energy, regulate water flow, and manage nutrient levels, sedimentation and accretion. Thus, there is a growing interest in integrating seagrass as a key component of a comprehensive climate-conscious strategy (Ondiviela et al., 2014). An effective approach to quantify the positive potential of seagrasses in altering coastal wave dynamics is by using numerical models. These numerical models operate at various spatio- temporal scales, ranging from large domains and multiple years to just a few regular waves in high resolution CFD numerical simulations. Zeller et al. (2014) classified these models, operating at different scales into three categories, each addressing the wave-vegetation interaction at a distinct scale: (1) blade scale, (2) meadow scale, and (3) ecosystem scale. The aim of the present study is to investigate the interaction between waves and vegetation at the blade scale. The primary objectives are two: first, to introduce a direct numerical technique that involves a two-way coupling between a fluid solver and a structural solver, and second, to present novel experimental data for a single flexible cylinder (Reis, 2022) serving as validation for the present (and future) numerical model(s).

The present work describes the developments done so far to the Praia da Vitoria coastal region under the LIFE-GARACHICO project, namely the implementation of module on HIDRALERTA early warning system for emergency response to coastal waver topping and flooding at Praia da Vitória bay.

The present work describes the developments done so far to the Praia da Vitoria coastal region under the LIFEGARACHICO project, namely the implementation of module on HIDRALERTA early warning system foremergency response to coastal waver topping and flooding at Praia da Vitória bay.

O acesso marítimo ao Porto de Aveiro apresenta problemas de navegabilidade que condicionam a entrada de navios de grande dimensão, em particular em algumas situações de maré e agitação marítima. Este estudo apresenta e avalia uma configuração alternativa para a embocadura da Ria de Aveiro que visa mitigar estes problemas.

O acesso marítimo ao Porto de Aveiro apresenta problemas de navegabilidade que condicionam a entrada de navios de grande dimensão, em particular em algumas situações de maré e agitação marítima. Este estudo apresenta e avalia uma configuração alternativa para a embocadura da Ria de Aveiro que visa mitigar estes problemas.

Docking large vessels is a delicate operation as the kinetic energy associated with the large mass of the vessel can result in high impact forces that can damage the vessel, fenders or even the quay. Berthing loads are usually quantified using design formulae based on kinetic energy and a single point of impact. Some correction factors are then used to consider the hydrodynamic mass, the ship

Docking large vessels is a delicate operation as the kinetic energy associated with the large mass of the vessel can result in high impact forces that can damage the vessel, fenders or even the quay. Berthing loads are usually quantified using design formulae based on kinetic energy and a single point of impact. Some correction factors are then used to consider the hydrodynamic mass, the ship

This communication describes the methodologies applied in the conception, implementation, andanalysis of a set of surveys on the risk perception of coastal flooding, carried out in the community ofPraia da Vitória (Azores, Terceira Island, Portugal).This work is part of the project LIFE-GARAC HICO* (LIFE20 CCA/ES/001641), whose objectiveis to create a Flexible Adaptation Strategic Framework for the coastal municipalities of Macaronesia, toincrease the resilience of these areas in face of current and future (considering climate change impacts)coastal extreme events. The project follows a co-participatory approach, to promote awareness amongthe population and increase reliability in coastal risk management. Indeed, involving all the existentstakeholders is the first step in promoting a democratic risk management, which in the end, leads to aresilience increase, in the face of global warming conditions.

N/A

N/A

N/A

N/A

N/A

C2IMPRESS is a multi-disciplinary project which aims to enhance understanding and public awareness on multi-hazard risk, based on innovative models, methods, frameworks, tools and technologies to develop decision-making platforms with a fine-grained spatio-temporal data to better assess impacts, vulnerability and resilience on natural hazards. This Report is the Deliverable 1.1 and belongs to Work Package 1, which is mainly addressed to identify the past climate and physical processes that underlie natural disaster events and their consequences

A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project

The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.

According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.

This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.

Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled

This deliverable is related to task 8.2

Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.

The project LIFEGARACHICO (LIFE20 CCA/ES/001641) proposes the creation of an effective flexible adaptation framework for the coastal unicipalities of Macaronesia, making specific local interventions to increase their resilience against extreme coastal events resulting from climate change. Social surveys were applied in Praia da Vitória, Terceira, Azores, to understand the civilians perception of coastal flooding events.

The project LIFE-GARACHICO (LIFE20 CCA/ES/001641) proposes the creation of an effective flexible adaptation framework for the coastal municipalities of Macaronesia, making specific local interventions to increase their resilience against extreme coastal events resulting from climate change. Social surveys were applied in both localities in order to understand the civilians perception of coastal flooding events

Realização de ensaios em modelo físico reduzido 3D para a avaliação da estabilidade do quebra-mar destacado do Porto Inlgês, Maio, Cabo-Verde

N/A

Adverse sea conditions can cause emergency situations associated to wave overtopping, which endanger the safety of people and goods, with negative impacts for society, the economy and the environment. Therefore, a methodology to assess the overtopping risk in port and coastal areas is essential for a proper planning and management of these areas.The Portuguese National Laboratory for Civil Engineering (LNEC) has been developing the HIDRALERTA system, an integrated decision-support tool for port and coastal management, which focus in preventing and supporting the management of emergency situations and the long-term planning of interventions in the study areas. It enables the user to calculate the risk for various port and coastal activities, starting with the characterization of sea-waves, wind field and tide levels at the study regions.HIDRALERTA was already tested at different places in Portugal: Costa da Caparica beach, in Almada, and port of Praia da Vitória, in the Azores. However, in both cases, the evaluation of wave overtopping / flooding consequences was carried out using a quite simple approach. In fact, such consequences were assessed only at a global and qualitative level, based on information provided by the responsible authorities.This paper aims at testing a quantitative methodology to evaluate overtopping consequences: the Analytic Network Process (ANP). This methodology was proposed to solve complex decision-making problems and its objective is to calculate the priorities among decision elements which will define their final weights on the consequences. The ANP approach can produce interdependencies between criteria and compute the respective weight of each criterion. Such a network model with dependence and feedback improves the priorities derived from judgements and makes prediction more accurate. So, the ANP allows comparison among clusters of elements. Furthermore, in this methodology we take into account the impacts of alternatives on the importance of criteria, by normalizing the comparison matrix. Thus, the given alternatives can influence the ranking of criteria.Application of the ANP methodology to the case study of Praia da Vitória port is presented and a consequences level map is obtained.

Apresenta-se um novo sistema de alerta para navios amarrados em portos que se encontra em desenvolvimento no Laboratório Nacional de Engenharia Civil. O sistema SWAMS_ALERTA é um sistema de previsão e alerta baseado na avaliação do risco associado ao comportamento de navios amarrados em zonas portuárias.Os riscos associados a navios amarrados decorrem de movimentos excessivos, quer no plano horizontal, quer no plano vertical. Estes movimentos podem condicionar as atividades portuárias, nomeadamente cargas e descargas, mas em casos extremos podem levar à ocorrência de situações de emergência, tais como rotura de cabos, rotura de cabeços de amarração ou até colisões com o cais. As consequências deste tipo de situações envolvem sempre grandes prejuízos materiais e por vezes humanos.O sistema SWAMS_ALERTA utiliza as medições e previsões de agitação marítima para a determinação dos seus efeitos em termos de movimentos nos seis graus de liberdade e forças nas amarras e defensas quando o navio se encontra estacionado no cais. Para tal, o sistema recorre a uma série de modelos numéricos, interligados entre si. A comparação destes valores com valores máximos admissíveis pré-estabelecidos permite a avaliação, em tempo real, de situações de emergência e a emissão de alertas dirigidos às entidades portuárias.O sistema é constituído por 4 módulos:I

N/A

N/A

N/A