Publications

In regions with a strong seasonal or interannual asymmetry in the distribution of precipitation and higher frequency of droughts, collective irrigation systems are vital infrastructures for agricultural activity. Although operating for decades, several systems have ageing infrastructures, with relevant water losses and pumping energy inefficiencies. Consequently, the systems are not adequately designed or operated to meet current and future water demand. Therefore, rehabilitation to improve water and energy efficiency while ensuring infrastructure, economic sustainability and service quality is crucial. In this sense, comprehensive approaches using performance assessment to support the planning process or benchmarking between water users associations play an essential role in improving efficiency in collective irrigation systems.

Many collective irrigation systems have been operating for decades, facing high degradation of existing infrastructures and huge water-energy efficiency problems. Predominantly composed of open canals, they have been partially or entirely converted into pressurised pipe systems, implying a considerable increase in energy consumption and operation and maintenance costs. Simple, easy-to-use, and comprehensive approaches for energy efficiency assessment in collective irrigation systems are needed for diagnosis and assisting decision-making on implementing adequate improvement measures. This research proposes and demonstrates an innovative approach based on the water and energy balances and performance indicators to assess the effect of water losses, network layout and operation, energy recovery, and equipment on energy efficiency. A novel methodology for energy balance calculation is proposed for open canal, pressurised and combined systems. The application to a real-life open canal system and network areas allowed the identification of efficiency problems mainly due to water losses in canals, followed by the dissipated energy in friction losses. Less critical are pumping and manoeuvring equipment inefficiencies. Also, a considerable excess of gravity energy is recovered in hydropower plants. In raising pipe systems, in which shaft input energy predominates and costs for pumping play a key role, surplus and dissipated energy in friction losses are the most relevant issues. Significant energy is lost in the water conveyance and distribution in both systems. Consequently, the potential to improve energy efficiency through water loss management, network layout, and operation improvement, besides pumping and manoeuvring equipment replacement, is considerable.

This study compares and discusses the adequacy of surrogate resilience metrics proposed in the literature for resilience assessment of drinking water systems concerning demand increase and network redundancy. A sensitivity analysis is carried out for increasing flow rates using a conceptual case study with different layouts and demand scenarios, selecting several metrics to assess the resilience of two real network areas. Resilience metrics based on surplus energy are sensitive to network layout and demand scenarios. The network resilience index considers hydraulic reliability and network diameter uniformity. In contrast, the weighted resilience index also considers the network topology and gives importance to pipes with higher flow rates. Entropy-based resilience metrics mainly rely on the network flows' uniformity and are sensitive to pipe redundancy. The entropy metric most adequate to assess the hydraulic capacity is the diameter-sensitive flow entropy, since it is sensitive to the velocity inside the pipes. Topology metrics cannot assess the hydraulic capacity though evaluate the system redundancy (meshed-ness coefficient), robustness (central-point dominance) and water transportation efficiency (average-path length). Surrogate resilience metrics do not assess the system performance during a failure. They indicate systems which are better prepared to overcome failure events and increased demand events, providing vital information to drinking water systems management.

A global framework to assess the energy use and efficiency in wastewater systems is presented, focusing on the development of a portfolio of energy use improvement measures specifically tailored to these systems. The framework includes a performance assessment system for energy efficiency in wastewater systems and an energy balance scheme. The development and analysis of the portfolio of measures included the following steps: (i) an extensive review and compilation of existing energy improvement measures on the urban water cycle, (ii) a tailored survey addressed to multidisciplinary teams of wastewater utilities, (iii) the consolidation of the portfolio of measures for wastewater systems with the identification of main benefits and drawbacks of each measure and (iv) the discussion of the application of the improvement measures. Results from the survey for the different assessed dimensions (e.g., priority, importance) of each measure are presented together with a specific analysis of wastewater utilities. The final portfolio is instrumental for utilities to select measures, decide on the priority ones and prepare an implementation plan.

Com secas cada vez mais frequentes e prolongadas em Portugal, é necessário repensar medidas que permitam enfrentar a falta de água. A água residual tratada constitui uma fonte de água alternativa, a ser utilizada como água para reutilização (ApR) em usos compatíveis, como rega de espaços verdes e lavagem de ruas.A modelação do decaimento de cloro em Sistemas de Distribuição de ApR (SDApR) carece de estudos que proponham metodologias de implementação dos modelos, técnicas de trabalho experimental a nível laboratorial e exemplos de aplicação à escala real. A modelação contribui para promover uma gestão eficaz da desinfeção da ApR, ajudando a determinar dosagens de desinfetante, concentrações residuais nas redes e locais de cloragem.Neste artigo apresenta-se uma metodologia para modelar o decaimento de cloro em ApR usando o software EPANET-MSX. A metodologia envolveu três fases: desenvolvimento do modelo hidráulico, modelação do decaimento de cloro na água e modelação do decaimento de cloro devido às paredes do reservatório e condutas. O modelo foi aplicado num SDApR da área de Lisboa e calibrado com ensaios à escala real, permitindo simular o decaimento de cloro em diferentes pontos do SDApR ao longo do tempo e prever as necessidades de doseamento de cloro

The number of climate-related disasters has progressively increased in the last two decades and this trend will drastically exacerbate in the medium- and long-term horizons according to climate change projections. In this framework, through a multi-disciplinary team and a strong background acquired in recent projects, ICARIA aims to promote the use of asset-level modeling to achieve a better understanding of climate related tangible direct and indirect impacts on critical assets due to complex, cascading, and compound disasters. Furthermore, it takes into account the related risk reduction provided by suitable, sustainable, and cost-effective adaptation solutions. ICARIA focuses on both (i) critical assets and services that were not designed for potential climate change-related impacts that can increase the unplanned outages and failures, and (ii) on housing, natural areas, and population. Cutting edge methods regarding climate scenario building, asset-level-coupled models, and multirisk assessment approaches will be implemented and replicated in three EU regions to understand how future climate scenarios might affect critical assets and to provide decision-making support tools to private and public risk owners to assess the costs and benefits of various adaptation solutions.

This paper investigates the effect of different types of structural and operational measures on water mixing and renewal time in circular and rectangular cross-section water storage tanks, aiming at a better understanding of the flow dynamics to find practicable solutions to improve their design, rehabilitation and operation. An experimental programme, including traditional tracer and dye tracer tests, was carried out in small-scale tanks for different configurations and operating conditions. Two tanks were tested with and without interior structures, with the inlet/outlet pipes at different locations and for constant and variable water level. The main findings are that: i) the most effective measure is operating with fill-and-draw cycles, however, for tanks operated nearly full structural measures are recommendable; ii) reducing the inlet pipe diameter and installing nozzles near the tank bottom improve the mixing conditions; iii) the use of baffles is recommendable when the inlet and outlet pipes are very close.

By leveraging performance assessment systems (PASs) and incorporating targeted strategies, utilities can enhance the overall effectiveness, reliability, efficiency, and environmental performance of their wastewater treatment facilities. This work presents the results obtained from a comprehensive analysis of treatment reliability and energy performance of three wastewater treatment plants (WWTPs). The results allowed identifying, for each WWTP, improvement needs related to the aeration energy requirements, as well as to determine the effluent concentration targets required to achieve higher reliability levels while potentially reducing running costs. By analysing reliability combined with energy efficiency, this methodology allowed identifying the WWTPs

Climate change has emerged as a global challenge, with consequences for the environment and societies. To mitigate its impacts, reclaimed water (RW) offers potential by reducing water withdrawal and minimizing pollution discharges in the environment. Safe RW requires disinfection and a sound management of chlorine residuals throughout the RW distribution systems (RWDSs). This study focuses on implementing and calibrating a chlorine decay model using EPANET-MSX in a real RWDS, incorporating both bulk and wall decays. The bulk decay accounts for reactions of monochloramine formation, auto-decomposition, and depletion by a parallel second-order mechanism where monochloramine reacts both with fast and slow organic matter reactive fractions. Two wall decays were considered in the RWDS, one in the tank, modeled through an overall wall decay constant, and one in the pipes, modeled through a wall decay constant. Field experiments were conducted to calibrate the complete model. This model was used as a support tool to diagnose the RWDS status condition and cleaning needs, and to manage its operation. Through simulated scenarios considering monochloramine wall decays similar to those observed in drinking water distribution systems, the model allowed predicting adequate chlorine dosing in summer and winter scenarios, so as to guarantee monochloramine concentrations between 1 mg/L and 5 mg/L through the network. These results point to the potential use of much lower doses than the ones currently applied.

N/A

N/A

N/A

N/A

N/A

The Technical Guide presents the 4th generation of the service quality assessment system, which abandons some 3rd generation indicators and adds new ones to respond to the latest challenges to supply services, urban waste water management and urban waste management. Changes are also made to definitions and benchmarks for some indicators are adjusted.

O projeto Avaler+

These technical guidelines provides guidance on the use of the hybrid process of powdered activate carbon adsorption and ceramic microfiltration for sustainable drinking water production. They were developed based on the field demonstration of the technology, in Portugal, with a pilot prototype, within the LIFE Hymenb project LIFE12 ENV/PT/001154 "Tailoring hybrid membrane processes for sustainable drinking water production", conducted by LNEC - the National Civil Engineering Laboratory and Águas do Algarve, S.A.

O objetivo do presente Guia é a apresentação e a especificação dosistema correspondente à 2.ª geração de avaliação da qualidade dosserviços de abastecimento de água, de saneamento de águas residuaisurbanas e de gestão de resíduos urbanos prestados pelas entidadesgestoras sujeitas a regulação.Este sistema constitui uma peça fundamental do modelo de regulaçãoem implementação pela ERSAR, sumariamente descrito neste Guia emais detalhadamente descrito em [1], nomeadamente no que respeitaà componente da regulação da qualidade do serviço, de forma a tornarpossível a avaliação quantificada.Note-se que, de acordo com o disposto na alínea e) do n.º 1 do artigo 5.ºdo Decreto-Lei n.º 277/2009, de 2 de outubro, a ERSAR tem atribuiçõesnão apenas para assegurar a regulação da qualidade de serviço prestadoaos utilizadores pelas entidades gestoras, mas também para avaliaro desempenho dessas entidades, promovendo a melhoria dos níveis deserviço. É no quadro destas atribuições que se pretende promover estesistema de avaliação da qualidade dos serviços de águas e resíduos.A 2.ª geração do sistema de avaliação da qualidade do serviço resultouda análise crítica do sistema de indicadores adotado na 1.ª geração e darespetiva aplicação desde 2004 ao universo das entidades concessionáriase teve em conta o estado atual de conhecimentos e a experiênciainternacional entretanto adquirida.Para além da identificação e da especificação de todos os componentesdo sistema de avaliação, e em particular do conjunto de indicadores dequalidade do serviço a utilizar em cada um dos três tipos de serviços,são também definidos os procedimentos de avaliação, através dadefinição da informação a obter, do cálculo de indicadores, da sua interpretaçãoe análise comparativa, numa perspetiva de benchmarking, eda produção do relatório de síntese.

N/A

O objectivo do presente Guia é a apresentação e a especificação do sistema correspondente à 2.ª geração de avaliação da qualidade dos serviços de abastecimento de água, de saneamento de águas residuais urbanas e de gestão de resíduos urbanos prestados pelas entidades gestoras sujeitas a regulação. Este sistema constitui uma peça fundamental do modelo de regulação em implementação pela ERSAR, sumariamente descrito neste Guia e mais detalhadamente descrito em [1], nomeadamente no que respeita à componente da regulação da qualidade do serviço, de forma a tornar possível a avaliação quantificada. Note-se que, de acordo com o disposto nas alíneas e) do artigo 5.º do Decreto-Lei n.º 277/2009, de 2 de Outubro, a ERSAR tem atribuições não apenas para assegurar a regulação da qualidade de serviço prestado aos utilizadores pelas entidades gestoras bem como para avaliar o desempenho dessas entidades, promovendo a melhoria dos níveis de serviço. É no quadro destas atribuições que se pretende promover este sistema de avaliação da qualidade dos serviços de águas e resíduos. A 2.ª geração do sistema de avaliação da qualidade do serviço resultou da análise crítica do sistema de indicadores adoptado na 1.ª geração e da respectiva aplicação desde 2004 ao universo das entidades concessionárias e teve em conta o estado actual de conhecimentos e a experiência internacional entretanto adquirida. Para além da identificação e da especificação de todos os componentes do sistema de avaliação, e em particular do conjunto de indicadores de qualidade do serviço a utilizar em cada um dos três tipos de serviços, são também definidos os procedimentos de avaliação, através da definição da informação a obter, do cálculo de indicadores, da sua interpretação e análise comparativa, numa perspectiva de benchmarking, e da produção do relatório de síntese.

Invited papers from the IWA Leading Edge Conference on Strategic Asset Management (LESAM), Lisbon, October 2007

A simulação matemática dos sistemas de abastecimento de água é hoje em dia uma ferramenta indispensável aos serviços de água, para apoio a uma gestão técnica racional. O campo de aplicação é variado, sendo um auxiliar das actividades de planeamento, de projecto, de operação e demanutenção. Destacam-se o apoio ao dimensionamento de novas redes, aos programas de reabilitação, ao licenciamento de novas ligações, ao controlo de perdas de água, ao controlo da qualidade da água nas redes ou à gestão optimizada de energia.Em Portugal, o desenvolvimento e a aplicação de modelos matemáticos de sistemas de distribuição de água iniciou-se na década de 80, com o modelo da rede de Almada, elaborado em 1981 pelo LNEC. Depois dealguns anos em que a actividade realizada se centrou essencialmente no ambiente científico e académico, as empresas de consultoria começaram a ganhar espaço de mercado na prestação deste tipo de serviços para as entidades gestoras. Numa fase inicial os requisitos computacionais eramconsideráveis

Water scarcity and asymmetric space-time distribution is driving many countries to seek nonconventional water sources. Treated wastewater is an emerging alternative water source but, depending on its use(s), it may require an increased level of water treatment. At the same time, the list of emerging contaminants (ECs), including pharmaceutical compounds (PhCs), of great relevance to the environment and to public health continues to grow. Further, many of these contaminants are partly or strongly resistant to conventional treatment in water and wastewater treatment plants (WTPs and WWTPs). Therefore, advanced treatment processes are being developed or optimised for improved PhC control. Amongst them, hybrid processes of adsorption

Advances in measurement and automation technologies enabled the deployment of monitoring systems with data acquisition at high frequency in Wastewater Treatment Plants (WWTP). The aim of this work is the design of soft sensors to predict hard-to-measure quality variables of wastewater required for mechanistic modeling of the biological treatment system in a real municipal WWTP. The input data collected in the WWTP using a flowmeter and spectro-photometric and electrochemical online probes, sampling campaigns and on-line analysis, was used for the development of soft sensors by multivariate analysis, like Principal Component Analysis (PCA) and Partial Least Squares (PLS) regression. Exploratory data analysis was performed in order to detect outliers, patterns and correlations. PLS models for soft sensors were developed using leave-one-out cross validation and the predictive capacity of independent data was evaluated by root mean square error (RMSE). The normalized RMSE obtained for organic nitrogen prediction were 19.5% and 18.1%, using sensors with analytical and spectral data, respectively. The possibility of using spectro-photometric probes providing measurements of a single wavelength was evaluated in order to reduce the online monitoring investment costs.

Capítulo de livro sobre planeamento e desenvolvimento turístico em que é desenvolvida a temática de resiliência e gestão do risco no turismo. São focados aspetos que incluem conceitos de base em resiliência e risco, as categorias de risco relevantes em turismo, a abordagem estruturada para a gestão do risco da norma ISO 31000:2009 e eixos de atuação para aumentar a segurança e a resiliência no turismo.

Municipalities and/or sewer operators have to decide investment strategies to rehabilitate and upgradeboth the efficiency and quality of their sewer systems. Frequently, such decisions are based on limitedinformation and do not consider simultaneously the sewer pipes, the wastewater treatment plant andthe receiving environment, especially groundwater. In order to provide some basic working elements tohelp operators in making such decisions, Work Area 4 (WA4) within the APUSS project, described in thepresent chapter included three topics:i) the definition of a set of infiltration/exfiltration specific performance indicators, PIs;ii) the proposition of a generic multi-criteria methodology to compare investment strategieswhich is elaborated separately in Chapter 10 and;iii) the analysis of cost structures of sewer systems and costings for the new tracer methods proposed in the APUSS methodology (as outlined in Chapter 2).

N/A

Esta publicação corresponde ao Programa de Investigação e ao Programa de Pós-Graduaçãoelaborados pela autora nos termos estabelecidos no artigo 30.º do Decreto-lei n.º 124/99, de20 de Abril, com vista à prestação de provas de habilitação para o exercício de funções decoordenação de investigação científica, realizadas em 31 de Janeiro e 1 de Fevereiro de 2008.Com o Programa de Investigação pretende-se contribuir para o estabelecimento de umaestratégia de desenvolvimento técnico e científico no âmbito da gestão patrimonial deinfra-estruturas de abastecimento de água e de drenagem de águas residuais. Trata-se de umprograma dirigido de forma privilegiada para as necessidades nacionais, mas que atende aocontexto internacional, tendo em vista o papel que o País pode desempenhar nodesenvolvimento do conhecimento nesta matéria, em sentido lato. Propõe-se uma estratégiaassente no estabelecimento de parcerias interdepartamentais e interinstitucionais, ancorada noNúcleo de Engenharia Sanitária do Departamento de Hidráulica e Ambiente do LNEC.Neste documento começa-se por fazer uma apresentação geral do programa, especificando osobjectivos e expondo as razões para a escolha do tema. Propõe-se a seguir uma visita guiadasobre o tema, que permite a um leitor menos familiarizado obter uma panorâmica geral.A sequência de capítulos seguinte é dedicada à apresentação e discussão do estado actual deconhecimentos. Inicia-se pelas abordagens integradas para apoio à GPI, seguindo-se depoispara as principais vertentes de análise na GPI: desempenho, custo e risco.Faz-se seguidamente uma análise de lacunas e prioridades de investigação. Termina-se com aapresentação de um programa de estudos, estruturados em quatro linhas de investigação:Linha 1: GPI

N/A

This internal report of Work Package 2

This document presents the links to and the contents of the

This report offers an overview of key present challenges for water governance across the 6 Living Labs of B-WaterSmart: Alicante (Spain), Bodø (Norway), East Frisia (Germany), Flanders (Belgium), Lisbon (Portugal) and Venice (Italy), according to the 12 OECD Principles for Water Governance (2015). It includes a set of recommendations for the LLs of the project and beyond, with a view to a more adaptive, fair and resilient water governance, along the lines of the circular economy and a fuller integration into the nexus of water, energy and waste

This document reports the activity developed in the second year of the EMPOWER+ project including the progress and results of the Task 1 & 2 - PACs, GACs and magnetic PAC synthesis and characterization, Task 3 - Batch adsorption studies with the produced PACs and GACs, Task 4 - Rapid small colunm tests and Task 7 - GAC regeneration assays.

The B-WaterSmart project, and specifically through WP6, aims at providing an assessment framework to support multi-stakeholder and strategic decision-making towards the transition to a water-smart society that recognizes multiple values and facilitates the active participation of a varied set of actors.

This document is the Management Plan for the LIFE Fitting project. Its purpose is to establish the project management composition, responsibilities, and processes to be followed throughout the project duration regarding project management. This project management plan is a deliverable of task 1.1 and is expected to be updated whenever a change in project requirements occurs or a risk or unexpected deviation from the planned course of action is encountered.

Milestone (MS) 22 contains the Living Lab (LL) strategic agendas (SA) as agreed with stakeholders in the Communities of Practice (CoPs). MS22 builds upon MS6 and MS12 and illustrates the changes to the SAs that occurred as result of the discussion with stakeholders. An overview of discussions held during the CoP meetings concerning the SAs is provided. The next steps with the SAs are also discussed.

In this document, the Lisbon Living Lab presents the sequence of quarterly exchanges of specification between Task (T) 2.4 and T3.5 that occurred from March 2021 (M7) until February 2023 (M30). The output of subtasks 2.4.2, 2.4.3 and 2.4.4 fed the development of the software tools in T3.5 and its outputs. A short and concrete description of the exchange of specification is provided.

This report documents the final release of the water cycle modelling and assessment solutions toolkit, which is comprised of the following ten tools: the water reuse strategic platform (#16), the environment for decision support and alternative course selection (#17), Re-Actor (#18), the sludge management platform (#19), the UWC observatory (#20), the stormwater reuse management system (#21), the Nessie System (#29), the Environmental Dashboard (#30), the Digital Enabler (#32) and the climate-readiness certification tool (#33) . It includes the following aspects: tool description, attributes and information around pre-existing background, developments and advancements within the project, navigation and primary functionalities, interoperability, indicative applications and synergistic benefits and how to access each tool and test data. It presents the use of the tools in the LLs by explaining the tools' integrative use, conceptual links, data flows and pilot interactions.

This report documents the final release of the water cycle modelling and assessment solutions toolkit, which is comprised of the following eight tools: UWOT #22, regional demand-supply matching GIS tool #23, reclaimed water distribution network water quality model #24, water-energy-phosphorous balance planning module #25, QMRA+ #26, risk assessment for urban water reuse module #27, short-term demand forecasting tool #28 and SuTRa #31 and complements the other toolkit. It includes the following aspects: tool description, attributes and information around pre-existing background, developments and advancements within the project, navigation and primary functionalities, interoperability, indicative applications and synergistic benefits and how to access each tool and test data. It presents the use of the tools in the LLs by explaining the tools' integrative use, conceptual links, data flows and pilot interactions.

EXCLUSIVO: AWARE-P vence prémio alemão e conquista novo reconhecimento internacional: É a primeira vez que é distinguido um projecto de um país que não fala alemão, entrevista de Ana Santiago (Jornalista do Jornal Água & Ambiente - Portal Ambiente Online) a Helena Alegre, 19 de Agosto de 2014

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A