Publications

Os trabalhos desenvolvidos por equipas de investigação sobre a zona costeira bem como as ferramentas de gestão e ordenamento dasregiões hidrográficas, como, por exemplo, os Planos de Gestão de Bacia Hidrográfica e os Planos de Ordenamento de Estuários, necessitamda definição de margem e de leito e, por conseguinte, do traçado da Linha de Máxima Preia-Mar de Águas Vivas Equinociais (LMPMAVE)que corresponde ao seu limite. Muito embora a definição destas áreas e respetivo limite esteja descrita na lei que estabelece a titularidadedos recursos hídricos, existe uma dificuldade prática em transpor para a realidade do terreno as conceções legais, particularmente emsistemas de transição, como os estuários. Assim, revela-se prioritário o desenvolvimento de uma metodologia abrangente e objetiva capazde responder a este desafio.No presente trabalho, apresenta-se uma abordagem metodológica interdisciplinar e integrada, baseada na recolha e análise deinformação bibliográfica, cartográfica e de campo sobre a área de estudo (estuário do Tejo), bem como a experiência adquirida notraçado deste limite noutros locais do país. Deste modo, foi possível desenvolver um conjunto de critérios para o traçado da LMPMAVEem ambientes de transição, que podem ser divididos em quatro tipologias: a)biofísica, estabelecida através da presença ou ausência devegetação halófita; b)tipo de estrutura/altimétrica, que se prende com as características intrínsecas da estrutura e sua elevação; c) de usodo solo; d) de índole legal, baseada na Lei 54/2005 de 15 de novembro.O desenvolvimento e aplicação desta metodologia ao estuário do Tejo permitiu dispor pela primeira vez do traçado deste limite nesteimportante sistema de transição e, simultaneamente, ultrapassar a dificuldade de implementar os conceitos legais de LMPMAVE noterreno, ao criar critérios objetivos de suporte à sua marcaçã

Like othersimilarcoastalsystems,theAlbufeiralagoonisartificially openedeveryyeartopromotewaterrenewalandclosesnaturallywithinafewmonths.TheevolutionoftheAlbufeiraLagoonInletfromitsopening inApril2010toitsclosure8monthslaterisqualitativelyandquantitativelyanalyzedthroughacombination ofmonthly field surveysandtheapplicationofaprocess-basedmorphodynamicmodel.Field dataalonewouldnotcoverthewholespace

The main purpose of this study is to investigate the uncertainties in the modelling of salinity fields in the Ria de Aveiro lagoon associated with the estimation of river flow discharges. The prediction of fresh water inputs is necessary to properly implement forcing conditions and consequently to provide accurate forecasts of baroclinic circulation in coastal lagoons. Located in the north-western Portuguese coast, the Ria de Aveiro is a shallow vertically homogeneous mesotidal coastal lagoon with a complex geometry. Although it is tidally dominated, it receives freshwater from five rivers, the Vouga, Antuã, Cáster, Boco and Ribeira dos Moínhos, whose contributions are responsible for the salinity variation within the system. This research concerns the accurate prediction of river flow to be used in the operational forecast system of the lagoon. Given the lack of observed data for river discharges, as there are only two real time measuring stations located in the Vouga and Antuã river basins, but far from the lagoon, alternative estimation approaches are needed. In order to estimate the river discharges for all five rivers, two different approaches were considered: the first estimates the Vouga river flow, the major fresh water source, based on the nearest real time measuring station and estimates the other river flows based on river basin areas proportionality; the second establishes river flows based on the precipitation/river flow relationships for the Vouga and Antuã rivers and on the areas of the other river basins using the SWAT model. The methodology comprises the exploitation of the 3D unstructured-grid hydrodynamic model SELFE, required to adequately simulate the flow and transport of salt in very complex domains such as the Ria de Aveiro. The model is forced by water elevations at the ocean boundary and river flows at the river boundaries, and atmospheric drivers at the surface (wind stress, atmospheric pressure and heat fluxes). The salinity model predictions were compared with data from seven stations, and its accuracy was assessed through Root Mean Square Error (RMSE). The river flows estimated by the first method led to the best fit between observed and predicted salinity.

Microtextures in quartz attributed to aeolian transport, principally bulbous edges and abrasion fatigue haveseldom been tested in the laboratory under controlled conditions. A wind tunnel experiment was conducted,using glass spheres (>70% SiO2) as a proxy for quartz, with the objective of determining the extent of mechanicaldamage to silica/glass transported in a mixture with quartz beach sand. The microspheres were microscopicallyimaged prior to transport in a wind tunnel, subjected at velocities ranging from 4 to 13 m/s insequential runs of 10 min. The range in velocity is capable of lifting grains into the air column or saltatingquartz grains and silica/glass spheres to produce mechanical impact, i.e. abrasion commonly experiencedin aeolian transport. With increasing velocity silica/glass spheres, which displayed minor imperfectionsprior to transport, began to show significant grain damage exhibiting increasing depth into the silica/glassfabric

We present a new formulation to predict the bed shear stress under skewed/asymmetric oscillatory flows(with or without a co-linear mean current), extending the work of Nielsen (1992). The nonlinearity of theoscillatory flow is incorporated through the use of two parameters: the index of skewness or nonlinearity,and the waveform parameter. The new formulation is tested against the bed shear stress estimated fromthe log-fit and momentum-integral methods, using oscillatory data from oscillating water tunnel experiments.The new formulation and the momentum-integral method agree well, but differ from those withthe log-fit method, possibly because both methodologies lead to different results for the phase lead betweenthe bed shear stress and the free-stream velocity. The new bed shear stress formulation is incorporated in aquasi-steady bedload formula, and accurately reproduces net transport rates under non-linear, nonbreakingwaves with and without an opposing current.

Projected rates of global sea level rise and human pressures have increased attention to the potential for landformchange in estuaries. This paper assesses the status of the fetch-limited beaches in the Tagus estuary, one of the largestestuaries in Europe, with a focus on distinguishing active beaches from inactive vegetated banks and identifyingconditions under which they change state. A total of 26 beaches were identified in the inner estuary and 49 in thetributary basins on 2007 aerial photographs and compared with conditions on older photographs (1944-1958). Lengths,widths and maximum fetch distances for beaches were measured and site visits were made to determine their originsand present conditions. Beaches occur at eroding uplands or marshes or on spits extending from eroding uplands.Human-created beaches occur on spoil areas, within niches formed by structures and where vegetation is eliminated orprevented from colonizing (e.g. boat launches and recreational surfaces). Basin infilling, with increase in the elevationof low tide terraces and the formation of bars, is reducing wave energies, and some beaches are reverting to vegetatedbanks. Beaches that become vegetated banks because of human actions occur where use for boating or recreation isabandoned and where spits that form off spoil deposits reduce fetch distances upwind.

Sea level rise (SLR) is increasing the risk of flooding in marginal low-lying estuarine areas. High water levels inestuaries are associated with the simultaneous occurrence of various phenomena ranging from high tidal levels to largefresh-water discharges. The intense and diverse human occupation of some of these marginal areas increases the floodvulnerability, endangering human lives and causing heavy economic and environmental losses. This issue becomeseven more relevant since the European Floods Directive establishes mandatory guidelines to all member statesregarding flood risk assessment, integrating flood maps with territorial characteristics. The present study aims to assessthe vulnerability to floods of a specific area in Tagus estuary, by integrating hydrodynamic modelling results with landuse cartography. Results suggest that about 16.1% of the estuarine marginal fringe could be flooded for the 2050scenario, rising up to 23.7% for the 2100 scenario. Moreover, industrial and urban areas will be the most affected sites.Considering future development scenarios planned for that site, the results point to an increasing vulnerability of urbanareas and therefore to the relevance of this knowledge in future planning and management guidelines as well asmeasures to adapt to SLR. The uncertainties and implications of the study are also discussed, and future research topicsare indicated.

The western sector of Ria Formosa, a lagoon system in the south of Portugal, represents approximately 90% of the total tidal prism of the lagoon and includes three inlets. Two sets of field campaigns to characterize the hydrodynamics of this sector in neap and spring tide conditions were conducted in the autumn of 2011 and spring 2012. The main findings related to the inlets hydrodynamics and water exchanges between the lagoon and the ocean along semi-diurnal tidal cycles are presented. To estimate the relative contribution of the three inlets to the water exchanges between Ria Formosa and the ocean, discharges were evaluated hourly along complete neap and spring semi-diurnal tidal cycles and the tidal prisms computed. In addition, two sea level time series measured in Faro-Olhão inlet and Faro commercial pier were harmonically analyzed. The results were compared with previous studies and used to validate the ELCIRC hydrodynamic model. This model provided additional information about the circulation and tidal prisms and distortion inside the western Ria Formosa. This study confirmed the Faro-Olhão inlet as the main inlet in terms of contribution for the total tidal prism. It is shown that the Ancão inlet lost hydraulic efficiency, contributing less than 6% to the total tidal prism in all situations and the Armona inlet gained efficiency in spring tide and lost efficiency in neap tide. Moreover, the Faro-Olhão inlet exhibits flood prisms higher than ebb prisms under neap and spring tides, suggesting a residual circulation towards the Ancão and Armona inlets.

N/A

N/A

N/A

We examine the generation of mass errors in depth-averaged finite element hydrodynamic simulations in coastal systems, and their impact on the mass conservation of Eulerian-Lagrangian transport solutions. The analysis is conducted both with a controlled synthetic test and a complex estuary. We find bathymetric gradients and complex boundaries, typical features of most estuaries, to be the primary sources of local flow mass errors. There is a strong correlation between flow and transport mass errors, which leads to very severe transport mass imbalances for typical horizontal resolutions in coastal applications. Grid refinement is shown to improve mass conservation both on flow and transport simulations. Key Words: Flow mass conservation. Transport mass conservation. Eulerian-Lagrangian methods. Shallow Water Models. Numerical experimentation.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

The hydrodynamics and sediment dynamics of a low energy estuarine beach was analysed. The beach is subjected to local wind waves generated in an area of restricted fetch, wake waves generated by catamarans and a semi diurnal meso-tidal regime. Only storm events of short duration modify the beach profile, which, once the normal hydrodynamic conditions are restored, naturally recovers its initial shape. The beach is characterised by having a steep upper slope until mean sea level, followed, seaward, by a low gradient terrace, and a bimodal sediment distribution. To investigate the hydro sedimentologic beach behaviour, wind, topo-hydrographic and sedimentologic data were used as input and validation of process based numerical modelling. Wave generation and transformation in an area of restricted fetch, nearshore circulation, sediment transport and morphological evolution were simulated for average annual conditions and storm conditions. The statistical analysis of a six-year wind data series allowed to derive the average wind regime, based on which, the average annual wave regime and the average annual longshore sediment budget, 14.5x103 m3year-1, were calculated. The contribution of the individual components of the representative wave regime, discretised by directional sector and height class of incidence, was evaluated as well as the spatial distribution of the longshore sediment transport in the active part of the beach profile. The characteristics of the wave groups generated by the passage of catamarans at different speeds were estimated and their action on the beach morphology was simulated. Although when the catamarans travel at 20 knots speed the average annual wake wave energy dissipated at the beach is 2.5 times higher than the average annual wind wave energy, the erosion effect on the beach profile is still not relevant for the present traffic. In opposition, short duration storm events generate the formation of an erosion scarp at the upper part of the beach face. The numerical modelling of this phenomenon allowed to acknowledge on the protective effect that the low gradient terrace has on the beach face.

N/A

A two-dimensional model of wind-driven circulation in a closed basin was developed using a finite-volume technique for generalized curvilinear grids and applying some of the recent developments in hydrodynamic modeling. The terms in the Navier¬Stokes equations were treated separately according to the fractional step method and the propagation step, including the continuity equation and the pressure and stress terms in the momentum equations, was solved using a conjugate gradient method.The model was then applied to a number of test cases to examine the feasibility of the approach used by comparing with results obtained with the two-dimensional version of the three-dimensional model CH3D. These included a square basin with constant slope and with a V-shaped bottom and Lake Okeechobee, in South Florida. To evaluate the long-term numerical stability of the model, a ten-day model simu¬lation with varying wind was also run for Lake Okeechobee.

An examination of the causes for generation and dynamics of turbidity maxima in estuaries reveals the critical role of sediment tidal pumping phenomenon and, to a lesser extent, of the well-known effect of residual gravitational circulation due to salt water penetration. Both phenomena depend on the vertical sediment concentration profile and, consequently, on the magnitude of the vertical mass transport fluxes. Where high concentration suspensions occur regularly, the erosion/deposition fluxes can be drastically modified by sediment stratification, consequently influencing sus¬pended sediment response to currents and wave action. This influence is inherent in flow-sediment hysteresis, which therefore reflects the role of vertical mass transport in the estuarine and coastal suspended fine sediment regime.A vertical transport numerical model was used to investigate the influence of several key parameters describing sediment settling, bed properties and stabilized diffusion on the concentration profile. The model was also applied to simulate the influence of the same parameters on the time-lagged sediment response to flow variations, reflected in the characteristics of flow-sediment hysteresis loops.Field data obtained in Hangzhou Bay (People´s Republic of China), a high concentration environment, showed typical features of flow-sediment hysteresis and confirmed the importance of the vertical mass fluxes in contributing to sediment transport in the bay. A qualitative simulation provided by the numerical model, using settling parameters corresponding to local sediment, while confirming the importance of the hysteresis phenomenon, also revealed the critical need to use algorithms describing adequately stabilized diffusion and bed fluxes.Additional evidence of hysteresis was obtained through analysis of microscale variables, such as the Reynolds stresses and the variances of the velocity components resulting from combined effects of wave action and turbulence. Spectral analysis of the measured random variations did not support the commonly accepted hypothesis of similarity between the responses to turbulent flow of sediment concentration and temperature. The normalized turbulent intensities for all the measured veloc¬ity components showed their highest values during the period of lowest sediment concentration; this result is consistent with the hypothesis of turbulent intensity damping by suspended sediment.

A contribution to increased use and development of the method of artificial nourishment of beaches is the main objective of this thesis. It also aims at being a guide for the design of the reconsctrution or outright creation of beaches.In the first chapter, the subject is introduced and the objectives of the thesis are outlined. The second chapter cover´s some general considerations on littoral dynamics, beach equilibrium and sediment budget.Since the theoretical foundations of the artificial nourishment of beaches still leave much to be desired, a description of this method and its principles are presented in the third chapter. Important technical and economic aspects are included, such as: sampling, analysis and characterization of native and borrow material; selection Of nourishment sources; extraction and transport of borrow sand; and characteristics of the theoretical final beach profile. Such problems as the integration of ecological aspects, and cost-benefit analysis are also treated.in the fourth chapter, the Portuguese experience in this domain is described. The experience of such countries as France and the U.S., where this method has frequently been used is also mentioned. In this way a considerable amount of hitherto scattered information is presented in a unified way.The fifth chapter, treats briefly the problem of coastal model similitude, both as a support for the experimental work: which was carried out and to help engineers in the design of a coastal physical model or in merely assessing the possibilities of such a model.In the sixth chapter, an experimental study is described of the influence of both the grain size of borrow material and the nourishment method on the redistribution of sediments after the nourishment. The obtained results are compared with existing theoretical methods and some prototype results.Finally, in the last chapter the main conclusions and recomendations of the thesis are presented.

We provide a systematic analysis of the consistency, stability, convergence and accuracy of the numerical solution of the transport equation by a general Eulerian-Lagrangian Method (ELM). The method involvesthree basic steps: the backwards tracking of characteristic lines following the flow, the interpolation of concentrations at the feet of these lines, and the solution of dispersion taking such concentrations as initial conditions. The first two steps constitute the Backwards Method of Characteristics (BMC); the third step involves a time-discretization along the characteristic lines, and a spatial discretization of the dispersion operator, both based on conventional techniques (e.g.. Euler or Crank¬Nicholson for time; finite-elements or finite-differences for space).The choice of the spatial interpolator is shown to impact the consistency, stability and convergence, as well as the accuracy of the BMC. Most interpolators ensure consistency, but only a few ensure stability, hence convergence; stability criteria are derived from a newly developed generalized Fourier analysis, which can account for non-linearities introduced by quadratic grids. The comparison of formally derived propagation and truncation errors, complemented by numerical experimentation, provides a reference for the choice of the interpolator, given a specific transport problem characterized by prevailing concentration gradients.The BMC potentiates the use of large time-steps, well above Courant number of order one. In the limiting case of pure advection, optimal accuracy would be obtained for a At close to the total time of interest; the presence of dispersion constrains, however, the size of At, especially in the case of non-uniform flows. The comparison of the truncation errors for the three basic steps of ELM provides a reference to select At. as a function of Ax, of the spatial interpolators and time-discretization schemes, and of the gradients of flow and concentrations.

Apresenta-se um estudo sistemático, baseado simultaneamente em análises formais e em experimentação numérica, da precisão e estabilidade da solução da equação de transporte por um método Euleriana-Lagrangeana (MEL). 0 método decompõe a equação de transporte em equações separadas de advecção e de difusão, resolvendo a primeira pelo método das características regressivas no tempo (MCR), e a segundo por um método de elementos finitos, do tipo Galerkin.Mostra-se que as interpolações no espaço requeridas pelo MCR são um factor limitativo da precisão global do MEL, e comparam-se diversas técnicas alternativas de interpolação, algumas das quais originais. A combinação de esquemas compactos e não-compactos de interpolação, baseados em polinómios de Lagrange, é apontada como uma potencial solução óptima.Demonstra-se que, para uma adequada escolha do esquema de interpolação, o MCR é consistente, estável e convergente e tem boas características de precisão. Escolhas inadequadas do esquema de interpolação podem, no entanto, causar instabilidade e inconsistência.Estabelece-se a dependência da precisão do MCR no passo de cálculo, mostrando-se que essa precisão aumenta, em geral (para um tempo total fixo), quando se reduz o número de passos de cálculo, isto é, quando se aumenta o passo de cálculo (uma propriedade simultaneamente pouco habitual e muito conveniente). No entanto, na gama de valores muito pequenos do Número de Courant, a precisão é praticamente independente do passo de cálculo, o que evita que o método se torne divergente.Analisa-se brevemente o efeito de malhas irregulares e pluridimensionais sobre a aplicabilidade e precisão do MCR. Apesar de sensível à irregularidade da malha, o método mantém boas características de precisão desde que as distorções geométricas não sejam excessivas. Malhas pluri-dimensionais, quando simultaneamente irregulares, levantam problemas específicos de aplicabilidade de esquemas não-compactos de interpolação; esses problemas poderão se resolvidos através da utilização conjugada de esquemas compactos e não-compactos, para um mesmo problema. Investigação adicional a ainda requerida nestas áreas.Mostra-se ainda que a presença de mecanismos físicos de difusão beneficia tanta a precisão da solução da equação de advecção como a precisão global do MEL.Finalmente, demonstra-se a eficácia da aplicação do MEL (numa forma particular, restricta a esquemas de interpolação compactos) à simulação do transporte de poluentes em águas costeiras. 0 método permite, em particular, realizar simulações longas (várias marés) a custos moderados, mesma para malhas irregulares com elevado número de nós, e, também, evitar a necessidade do uso de difusividades artificiais como garante de estabilidade; em geral, e nestes dois aspectos em particular, o método revela-se superior a métodos Eulerianos, mais convencionais (por exemplo, métodos de elementos finitos, do tipo Galrkin ou Petrov-Galerkin, aplicados à equação de transporte indivisa).

No âmbito de um projecto de investigação intitulado caracterizarão de Formações Estuárias e do Meio Marítimo Litoral Por Técnicas de Detecção Remota , insere-se o estu¬do da avaliação de suspensões na água do mar com recurso à aplicação de técnicas de detecção remota como meio de caracterização de parâmetros de qualidade de água. 0 trabalho que se apresenta foi desenvolvido com os seguintes objectivos:1- Desenvolvimento de metodologias de análise e quantificação de suspensões na água do mar a partir de dados de satélite;2- Implementação sob forma de programas para computador de modelos de quantificação de suspensões orgânicas e inorgânicas na água do mar, a aplicar aos dados do radiómetro CZCS do satélite NIMBUS-7;3- Aplicação e verificação do modelo ao litoral português.Corn vista à consecussão destes objectivos, começa-se por apresentar uma extensa análise das formas de abordagem do problema, enumerando-se os diversos métodos actualmente seguidos, nomeadamente o Empírico, o Teórico e, neste, os métodos microscópico e macroscópico.Com base nesta análise, propõe-se um modelo numérico de quantificção das suspensões a partir dos dados do radiómetro CZCS do satélite NIMBUS-7, o qual, embora empírico na sua formulação como a maioria dos actualmente existentes, se apoia no comportamento radiomótrico da água do mar e dos seus constituintes típicos, cujas características se apresentam também.A implementação prática do modelo exige a filtragem da componente atmosférica presente nos dados rediométricos. Com este objectivo, apresenta-se um modelo baseado na metodo¬logia correntemente utilizada. Consiste na consideração da difusão simples, causada pelos constituintes básicos da atmosfera (moléculas gasosas, aerosóis e ozono) na gama de comprimentos de onda considerada (440, 520, 550 e 670nm). Esta metodologia conduz, porém, a um sistema de equações indeterminado e que é resolvido pela consideração de uma equação ´exterior´ ao processo de transferência radiativa que tem lugar na atmasfera. Para este efeito, utilizou-se a equação de Smith e Wilson por ser a mais divulgada, ressalvando-se, contudo, a necessidade de verificação da sua efectiva aplicação às águas do litoral português, o oqe não foi possível concretizar dada a inexistência de dados.

A numerical method for the solution of the two-dimensional, unsteady, transport equation is formulated, and its accuracy is tested.The method uses a Eulerian-Lagrangian approach, in which the transport equation is divided into a diffusion equation (solved by a finite element method) and a convection equation (solved by the method of characteristics). This approach leads to results that are free of spurious oscillations and excessive numerical damping, even in the case where advection strongly dominates diffusion. For pure diffusion problems, optimal accuracy is approached as the time-step, At, goes to zero; conversely, for pure-convection problems, accuracy improves with increasing At; for convection-diffusion problems the At leading to optimal accuracy depends on the characteristics of the spatial discretization and on the relative importance of convection and diffusion.The method is cost-effective in modeling pollutant transport in coastal waters, as demonstrated by an illustrative application to a case study (sludge dumping in Massachusetts Bay). Numerical diffusion is eliminated or greatly reduced, raising the need for realistic estimation of dispersion coefficients. Costs (based on CPU time) should not exceed those of conventional Eulerian methods and, in some cases (e.g., problems involving predictions over several tidal cycles), considerable savings may even be achieved.

0 principal objectivo desta tese é mostrar a habilidade do métodos dos elementos finitos e do método dos elementos de fronteira na modelação das ondas gravíticas de superfície.Na análise linear, as equações reduzidas do movimento ondulatório são resolvidas pelo método dos elementos finitos, levando em linha de conta a reflexão parcial, a radiação e o atrito de fundo. A modelação da radiação é feita com elementos infinitos ou com elementos de radiação, sendo estes encarados como um caso particular dos elementos de reflexão. 0 atrito de fundo é introduzido após a discretização e é levado a efeito através de um coeficiente empírico que se pode relacionar com o coeficiente de Chezy.Quer o modelo determinístico quer o modelo estocástico, obtido do primeiro com base na noção do estimador natural, permitem a realização de ensaios de ressonância ou de agitação. Nos ensaios de ressonância de uma bacia portuária tem particular interesse o conhecimento do espectro de resposta ao ruído bran¬co de banda limitada.A título de exemplo de aplicação mostram-se alguns aspectos do estudo das condições de ressonância do porto de Leixões.Logo que não sejam válidas as hipóteses simplificativas que permitem uma abordagem linear das ondas gravíticas de superfície, são resolvidas as equações não lineares do movimento ondulatório com superfície livre, pelo método dos elementos de fronteira. As suas peculiaridades permitem, sem qualquer dúvida, considerar o método dos elementos de fronteira como o mais vocacionado para este tipo de análise.Os programas de cálculo automático para o estudo da análise não linear estão ainda em fase de teste, pelo que não se apresentam exemplos de aplicação.

Este trabalho é dirigido principalmente para o uso da simulação numérica dos escoamentos em estuários como uma ferramenta pa¬ra estudos de engenharia. Fazem-se algumas considerações gerais sobre a definição e classificação de estuários seguidas por uma descrição sumária da hidrodinâmica dos estuários. Descrevem-se e comparam-se as várias técnicas utilizadas na solução de problemas de hidradinâmica de stuários.Faz-se a dedução formal de um modelo matemático do escoamento em estuários homogéneos e integram-se verticalmente as suas e¬quações, obtendo-se as conhecidas equações do escoamento em águas pouco profundas ("shallow water equations"). Estas equações são discretizadas utilizando os métodos dos elementos finitos e das diferenças finitas, respectivamente no espaço e no tempo.Faz-se a descrição de um sistema de cálculo para determinar a solução do modelo matemático discretizado e tecem-se várias considerações acerca do seu desenvolvimento e uso.Finalmente apresentam-se os resultados de alguns testes utilizados para verificar o funcionamento do sistema de cálculo.

N/A

Descreve-se a metodologia de exploração do modelo Litmod. Tata-se de umconjunto de procedimentos que foram sendo estruturados no decurso de diversasaplicações a casos reais. Esses procedimentos apresentam alguns aspectosoriginais e aplicam-se: na elaboração e esquematização dos dados; na avaliaçãoda fiabilidade das simulações; na caracterização da dinâmica sedimentar; nodiagnóstico dos problemas; e no estudo de intervenções de correcção emelhoramento.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A