Papers
Info
Earthquake shaking scenarios for the metropolitan area of Lisbon
In this study, we simulate and compare ground motion shaking in the city of Lisbon and surrounding counties (metropolitan area of Lisbon (MAL)), using two possible earthquake models: the onshore source area of Lower Tagus Valley, M5.7 and M4.7 and the offshore source area, Marques de Pombal Fault, M7.6, one of the possible source of the 1755 Lisbon earthquake. The stochastic and a new hybrid stochastic-deterministic approach (DSM) are used in order to evaluate the ground shaking and to characterize its spatial variability. Results are presented in terms of response acceleration spectra (PSA) and peak ground acceleration (PGA) with respect to bedrock and surface. Site effects are evaluated by means of equivalent stochastic non-linear one-dimensional ground responses analysis, performed for a set of stratified soil profile units properly designed to cope with the soil site conditions of MAL region. A sensitive study is carried out using different input parameters and different approaches in order to give the basic information to evaluate the range of uncertainty in seismic scenarios.
Year: 2008
Number Pages:
347-364pp.
Author(s): Carvalho, A. M.; Zonno , G.; Franceschina, G.; Bilé Serra, J.; Campos Costa, A.
: Soil Dynamics and Earthquake Engineering
Editor: Elsevier
Volume:
Vol. 28, Issue 5.
Keywords: Metropolitan area of Lisbon; Local effects; Power spectral density function; Non-stationary random process; Deterministic-stochastic method; Response spectra; Ground motion simulation; Stochastic finite-fault modelling
Info
Earthquake shaking scenarios for the metropolitan area of Lisbon
In this study, we simulate and compare ground motion shaking in the city of Lisbon and surrounding counties (metropolitan area of Lisbon (MAL)), using two possible earthquake models: the onshore source area of Lower Tagus Valley, M5.7 and M4.7 and the offshore source area, Marques de Pombal Fault, M7.6, one of the possible source of the 1755 Lisbon earthquake. The stochastic and a new hybrid stochastic-deterministic approach (DSM) are used in order to evaluate the ground shaking and to characterize its spatial variability.Results are presented in terms of response acceleration spectra (PSA) and peak ground acceleration (PGA) with respect to bedrock and surface. Site effects are evaluated by means of equivalent stochastic non-linear one-dimensional ground responses analysis, performed for a set of stratified soil profile units properly designed to cope with the soil site conditions of MAL region. A sensitive study is carried out using different input parameters and different approaches in order to give the basic information to evaluate the range of uncertainty in seismic scenarios.
Year: 2008
Number Pages:
347-364.
Author(s): Carvalho, A. M.; Zonno , G.; Franceschina, G.; Bilé Serra, J.; Campos Costa, A.
Editor: Elsevier
Volume:
28.
Keywords: Ground motion simulations; Stochastic finite-fault modelling
Info
Experimental dynamic behavior of free-standing multi-block structures under seismic loadings
This article describes the dynamical behavior of free-standing block structures under seismic loading. A comprehensive experimental investigation has been carried out to study the rocking response of four single blocks of different geometry and associations of two and three blocks. The blocks, which are large stones of high strength blue granite, were subjected to free vibration, and harmonic and random motions of the base. In total, 379 tests on a shaking table were carried out in order to address the issues of repeatability of the results and stability of the rocking motion response. Significant understanding of the rocking motion mechanism is possible from the high quality experimental data. Extensive experimental measurements allowed to discuss the impulsive forces acting in the blocks and the three-dimensional effects presented in the response.
Year: 2008
Number Pages:
953-979pp..
Author(s): Campos Costa, A.; Lourenço, P.; Peña, F.
: Journal of Earthquake Engineering
Editor: Taylor & Francis
Volume:
Vol. 12.
Keywords: Multi-block structures; Rigid bodies; Rocking motion; Dynamics; Earthquakes
Info
Stone masonry in historical buildings. Ways to increase their resistance and durability
Stone masonry in historical buildings. Ways to increase their resistance and durability
Year: 2008
Number Pages:
2194-2205pp.
Author(s): Bairrão, R.
Editor: Engineering Structures Journal, Elsevier
Volume:
vol 30.
Keywords: Stone masonry; Polymer grids; Fibre mortars; Seismic tests
Info
On the dynamics of rocking motion of single rigid-block structures
This paper describes the behavior of single rigid-block structures under dynamic loading. A comprehensive experimental investigation has been carried out to study the rocking response of four blue granite stones with different geometrical characteristics under free vibration, and harmonic and random motions of the base. In total, 275 tests on a shaking table were carried out in order to address the issues of repeatability of the results and stability of the rocking motion response. Two different tools for the numerical simulations of the rocking motion of rigid blocks are considered. The first tool is analytical and overcomes the usual limitations of the traditional piecewise equations of motion through a Lagrangian formalism. The second tool is based on the discrete element method (DEM), especially effective for the numerical modeling of rigid blocks. A new methodology is proposed for finding the parameters of the DEM by using the parameters of the classical theory. An extensive comparison between numerical and experimental data has been carried out to validate and define the limitations of the analytical tools under study.
Year: 2007
Number Pages:
2383
Author(s): Campos Costa, A.; Lourenço, P.; Lemos, J. V.; Peña, F.; Prieto, F.
: Earthquake Engineering & Structural Dynamics
Editor: John Wiley & Sons Ltd
Volume:
Vol. 36, Issue 15.
DOI:
10.1002/eqe.739
Keywords: Rocking motion; Dynamics; Gid blocks
Info
Caracterização do parque habitacional de Portugal Continental para estudos de risco sísmico
A caracterização do parque habitacional existente em Portugal Continental no que respeita à sua vulnerabilidade sísmica e a sua classificação em tipologias construtivas são os principais objetivos do presente artigo.Esta caracterização e classificação estão enquadradas num estudo de âmbito mais vasto que é o de avaliação do risco sísmico de Portugal Continental [Sousa,2005] que, por sua vez, requer o conhecimento prévio da vulnerabilidade sísmica do seu parque habitacional.Neste contexto, apresenta-se o panorama da construção existente em Portugal Continental, caracteriza-se e evolução das práticas construtivas ao longo do tempo, identificam-se os principais tipos de construção que subsistem e se praticam no Continente, descrevem-se, de forma sumária, os respetivos sistemas estruturais, mencionando as suas principais vulnerabilidades face à ação dos sismos (entendidas como as deficiências do seu desempenho sísmico), e tipificam-se as soluções construtivas mais correntes enquadrando-as nas tipologias identificadas no Censos 2001.
Year: 2006
Number Pages:
35-50pp.
Author(s): Luísa Sousa, M.; Oliveira, C.S.; Campos Costa, A.
: RPEE
Editor: LNEC
Volume:
Série I, nº 55.
Keywords: Tipologias construtivas; Avaliação do risco sísmico
Info
A Simplified Model to Estimate Natural Venilation Flows for Simple Dwelling Layouts
Apresenta-se um método expedito, baseado em ábacos, de estimativa de caudais de ventilação natural considerando as componentes eólica e térmica
Year: 2005
Number Pages:
353-362.
Author(s): Marques da Silva, F.; Saraiva, J.
: The International Journal of Ventilation
Editor: VEETECH
Volume:
Vol 3, nº4.
Keywords: método de cálculo; ventilação Natural
Info
Modelos Preditivos para a Ventilação Natural
Apresentam-se modelos preditivos para a ventilação natural, como contribuição para a redução de sistemas AVAC, mantendo a Qualidade do Ar Interior.
Year: 2005
Number Pages:
39-41.
Author(s): Pinto, M.; Marques da Silva, F.; Freitas, V.
: Construção Magazine
Editor: Engenho e Média, Lda
Volume:
nº14, 3º tri.
Keywords: ventilação natural
Info
Natural Ventilation Air Changes Rates Considering Atmospheric Turbulence
A ventilação natural requer a estimativa adequada dos caudais de ar em circulação, as taxas de renovação, função da velocidade do vento e da distribuição de pressão na envolvente. A turbulância atmosférica introduz perturbações neste processo simplificado induzindo variações na velocidade e direcção do vento, podendo dar origem a reversões do escoamento.
Year: 2004
Number Pages:
5-6.
Author(s): Marques da Silva, F.
: Construction Technology in Europe
Editor: BRE
Volume:
26.
Keywords: Turbulência; Ventilação
Info
Seismic hazard for the Central Group of the Azores Islands
Probabilistic seismic hazards maps have been prepared either for the archipelago of the Azores in general terms, or for the islands of the Central Group using updated seismic information for the region, including a revision of the earthquake catalogue for the period 1522-1998. Two different approaches were used: (i) a standard seismic source model and (ii) a semi-zonified source model based on spatially smoothed seismicity where no delineation of seismic sources is needed. Preliminary data point out that high PGA values were obtained for an area located to the west of the Central Group and for an area between Terceira and the São Miguel Islands. Deaggregation of hazard for some counties was evaluated and results are presented in terms of mean and modal values of magnitude and distance, showing that the main contributions to hazard in all counties are from close-in and not very severe earthquakes.
Year: 2001
Number Pages:
89-105pp.
Author(s): Carvalho, A. M.; Luísa Sousa, M.; Oliveira, C.S.; Nunes, J. C.; Campos Costa, A.; Forjaz, V.H.
: Bollettino di Geofisica Teorica ed Applicata
Editor: OGS
Volume:
Vol. 42, Nº 1-2.
Keywords: Azores; Probabilistic seismic hazards
|
Comunicação
Info
Ensaio aerodinâmico de uma ponte pedonal suspensa
O trabalho apresentado refere-se à avaliação do comportamento aerodinâmico da ponte pedonal suspensa 516 Arouca. Para tal realizaram-se ensaios em túnel de vento sobre um modelo reduzido de modo a obter os seus coeficientes aerodinâmicos estáticos e a resposta dinâmica.Os ensaios estáticos contemplaram diferentes configurações: i) tabuleiro; ii) tabuleiro e catenárias; iii) tabuleiro com pessoas, e; iv) tabuleiro e pórticos de suporte aos cabos de estabilização. Para os ensaios dinâmicos foi ensaiado apenas o tabuleiro.Para estes últimos ensaios, dado que o principal modo de deslocamento é lateral (em baloiço), houve que implementar um esquema de suspensão apropriado.
Year: 2021
Number Pages:
15.
Author(s): Marques da Silva, F.
Editor: Associação Portugusa de Análise Experimental de Tensões
Keywords: Túnel de vento; Aerodinâmica; : Pontes suspensas
Info
Análise não linear de um conjunto de edifícios em placa no bairro de alvalade: avaliação preliminar de estabilidade e previsão dos mecanismos de colapso
Os edifícios tipo
Year: 2019
Number Pages:
12p.
Author(s): Bernardo, V.; Candeias, P.; Campos Costa, A.; Costa, A.
Editor: Comissão Organizadora
Keywords: Modos de colapso; Análise preliminar de estabilidade; Applied Element Method; Ensaios de caraterização dinâmica; Edifícios tipo
Info
Comportamento de paredes de alvenaria sujeitas a ações no plano: análise numérica e validação experimental
As estruturas de alvenaria têm nos demonstrado ao longo dos anos grande suscetibilidade perante a ação dos sismos. Para que possam ser definidas e implementadas estratégias de mitigação é importante compreender a vulnerabilidade destas estruturas.O presente estudo pretende analisar o comportamento de duas paredes de alvenaria, com e sem reforço, sujeitas a ações cíclicas no seu plano e sob carregamento vertical. Como proposta de reforço e melhoria do comportamento da parede foi utilizada rede de fibra de vidro e argamassa à base de cal. Numa primeira fase será utilizado um programa de cálculo avançado para análises não lineares, baseado na formulação do Applied Element Method (AEM) [1], de forma a prever o comportamento das paredes até ao colapso. Os resultados serão comparados e discutidos sendo feita a validação experimental do modelo numérico e da formulação utilizada.
Year: 2019
Number Pages:
12p.
Author(s): Bernardo, V.; Mera Marques, A.; Candeias, P.; Campos Costa, A.; Ferreira, J.
Editor: Comissão Organizadora
Keywords: Validação experimental; Previsão numérica; Applied Element Method; Paredes de alvenaria
Info
Experimental response of non-seismically designed URM buildings subjected to induced seismicity
The response of three full-scale unreinforced masonry buildings, without specific seismic detailing, as observed in shake table testing at LNEC for a seismic action representative of induced seismicity, is presented. The first building specimen simulated the upper floor and roof of the end-unit of a two-storey terraced house, built with unreinforced cavity walls, a reinforced concrete slab and a pitched timber roof. The second specimen was a replica of the roof of the first building. The third specimen represented instead a one-story detached pre-1940
Year: 2019
Number Pages:
12p.
Author(s): Correia, A.A.; Mera Marques, A.; Campos Costa, A.; Candeias, P.; Bernardo, V.; Tomassetti, U.; Graziotti, F.; Kallioras, S.
Editor: Comissão Organizadora
Keywords: Collapse; Limit states; Induced seismicity; Full-scale shake table test; Unreinforced masonry building
Info
Fiabilidade estrutural de edifícios existentes de betão armado sem dimensionamento sismorresistente
Até à introdução e disseminação do atual regulamento de dimensionamento sismorresistente em 1983, o Regulamento de Segurança e Acções para Estruturas de Edifícios e Pontes (RSA), a generalidade dos edifícios de betão armado eram dimensionados para resistir apenas a cargas gravíticas. O presente estudo pretende caracterizar o comportamento sísmico destes edifícios bem como quantificar a fiabilidade estrutural quando avaliados à luz do Eurocódigo 8 - Parte 3.Por forma a criar um contexto representativo desta classe de edifícios, foram gerados centenas de modelos numéricos que refletem as principais características geométricas e mecânicas dos materiais, e que obedecem às regras e disposições construtivas definidas nos regulamentos nacionais anteriores à introdução do RSA. A análise probabilística dos resultados obtidos para os níveis de perigosidade associados às diferentes regiões doterritório nacional fornece indicações de quais as combinações edifícios/zonas sísmicas que apresentam uma maior vulnerabilidade face à ação sísmica.
Year: 2019
Number Pages:
12p.
Author(s): Sousa, R.; Campos Costa, A.; Candeias, P.; Costa, A.
Editor: Comissão Organizadora
Keywords: Betão armado; Edifícios existentes; Comportamento sísmico; Fiabilidade estrutural
Info
Proposta de uma metodologia para a avaliação expedita de edifícios de existentes de betão armado
A avaliação da segurança sísmica de edifícios existentes tem como quadro de referência a NP EN 1998-3; 2017. A complexidade destes procedimentos, aliada ao reconhecimento de que uma parte significativa do território nacional apresenta uma sismicidade média/baixa, torna a aplicação desta norma complexa para a maioria dos edifícios existentes de pequeno a médio porte.Neste contexto, foi desenvolvido um estudo probabilístico com o objetivo de definir dois procedimentos alternativos que, não pretendendo substituir a regulamentação existente, permitem avaliar a segurança sísmica de edifícios de uma forma expedita, com base nas propriedades geométricas e mecânicas dos seus elementos verticais.Não obstante a sua simplicidade, estes métodos permitem assegurar o mesmo nível de fiabilidade estrutural para os diferentes graus de perigosidade sísmica em Portugal, bem como um nível de segurança inversamente proporcional ao nível de complexidade dos mesmos, tendo como referência a NP EN 1998-3; 2017.
Year: 2019
Number Pages:
12p.
Author(s): Sousa, R.; Campos Costa, A.; Candeias, P.; Costa, A.
Editor: Comissão Organizadora
Keywords: Betão armado; Edifícios existentes; Avaliação segurança sísmica
Info
Collapse shake-table test on a URM-timber roof substructure
Typical low-rise masonry construction in regions such as Europe, Australia and New Zealand consists of cavity or solid URM walls covered with various timber roof configurations generally supported by masonry gables. The flexibility of these light timber roof systems has been reported to have significant effect on the seismic performance of the structure as a whole. Post-earthquake observations and experimental outcomes highlighted the large vulnerability of the URM gable walls to the development of overturning mechanisms, both due to the out-of-plane excitations and the in-plane timber diaphragm deformability. This paper presents a full-scale collapse shake-table test on a Dutch roof substructure composed by wooden planks supported by timber beams lying on masonry gable walls. After attaining the collapse of the gable walls, the timber roof diaphragm was subjected to a supplementary quasi-static cyclic pushover test for a complete characterization of the system response. The test is a part of a wider research project aimed at assessing the vulnerability of URM buildings in Groningen, a region of the Netherlands not naturally prone to seismic events, but which has recently been exposed to induced seismicity. The presented results include the damage evolution, the collapse mechanism and the hysteretic response of the specimen.
Year: 2018
Number Pages:
12p.
Author(s): Correia, A.A.; Tomassetti, U.; Campos Costa, A.; Penna, A.; Graziotti, F.; Magenes, G.
Editor: EAEE/ETAM
Keywords: Collapse; Roof; Timber; Unreinforced masonry; Full-scale shake-table test
Info
Full-scale shake-table tests of URM buildings subjected to induced ground motions
This paper discusses the results of three dynamic shake-table tests, performed on full-scale unreinforced masonry buildings without specific seismic detailing. The testing program is part of a wider research project aimed at assessing the seismic vulnerability of buildings typical of the Groningen region, located in Northeast of the Netherlands. This area, historically not prone to tectonic ground motions, in the recent years has been subjected to earthquakes induced by reservoir depletion due to gas extraction. The first building specimen simulated the end-unit of a two-story terraced house, built with unreinforced cavity walls. These walls were composed of an inner load-bearing leaf, made of calcium silicate bricks supporting the floors, and an outer veneer, made of clay bricks with aesthetic and weather-protection function. The two leafs were interconnected by distributed metal ties. The floors consisted of reinforced concrete slabs, providing rigid diaphragms in their plane. The pitched roof was made of longitudinal timber purlins, supported by end gables perpendicular to the shaking direction, and wood boards. The second specimen was a replica of the second story and the attic of the first building, with identical details for walls, slab, and roof framing tested to study the collapse mechanism. The third specimen represented instead a one-story detached pre-1940s house, built with double-wythe unreinforced clay masonry walls. The prototype structure was designed to include large openings and a re-entrant corner, causing significant horizontal irregularities. The first floor was made of timber beams and planks, resulting in a flexible diaphragm. The steep-pitch roof consisted of a series of timber trusses connected by wood purlins and boards. The two façades perpendicular to the shaking direction were designed in order to represent two common gable geometries.
Year: 2018
Number Pages:
12p.
Author(s): Graziotti, F.; Tomassetti, U.; Correia, A.A.; Penna, A.; Magenes, G.; Guerrini, G.
Editor: EAEE/ETAM
Keywords: Induced Seismicity; Collapse; Roof; Unreinforced masonry building; Full-scale shake-table test
Info
Towards a uniform earthquake risk model for Europe
Seismic risk has been the focus of a number of European projects in recent years, but there has never been a concerted effort amongst the research community to produce a uniform European risk model. The H2020 SERA project has a work package that is dedicated to that objective, with the aim being to produce an exposure model, a set of fragility/vulnerability functions, and socio-economic indicators in order to assess probabilistic seismic risk at a European scale. The partners of the project are working together with the wider seismic risk community through web tools, questionnaires, workshops, and meetings. All of the products of the project will be openly shared with the community on both the OpenQuake platform of the Global Earthquake Model (GEM) and the web platform of the European Facilities for Earthquake Hazard and Risk (EFEHR).
Year: 2018
Number Pages:
10p.
Author(s): Romão, X.; Correia, A.A.; Crowley, H.; Rodrigues, D.; Silva, V.; Despotaki, V.; Castro, J.M.; Akkar, S.; Hancilar, U.; Pitilakis, K.; Pitilakis, D.; Belvaux, M.; Wiemer, S.; Danciu, L.; Bursi, O.S.; W
Editor: EAEE/ETAM
Keywords: European risk; Socio-economic vulnerability; Fragility model; Exposure model; Seismic risk
Info
A fibre-based frame element with explicit consideration of bond-slip effects
Reinforced concrete (RC) frames subjected to seismic loading often depict localized member-end deformations due to strain penetration effects between adjacent members, such as beam-column and column-footing joints. Past experimental programs indicate that the bond-slip deformations occurring at the interface between the reinforcement and the surrounding concrete can contribute up to 40% of the lateral deformation of the RC members.Despite the recognized importance of strain penetration effects on the response of RC structures, the consideration of such effects in numerical models is still limited. The employment of advanced bond-slip models within detailed finite element formulations, capable of simulating continuous domains with highly discretized meshes, has witnessed great advances over the recent years with encouraging results. Nonetheless, this modelling approach is computationally heavy and hence inapplicable for practical seismic (nonlinear) analysis of structures.Alternatively, the use of beam-column elements with lumped or distributed plasticity is a more computationally efficient and engineering-friendly modelling approach. Unfortunately, the elements of this type available in conventional numerical packages did not yet consider an explicit simulation of the interface between the reinforcing bars and the surrounding concrete along their embedment length. In other words, the inclusion of bond-slip effects in beam element models has been essentially achieved through simplified formulations based on empirical relationships.The present study aimed at overcoming the foregoing limitation by developing an explicit bond-slip model applicable to general fibre-based beam-column elements. Using a state-of-the-art bond-slip constitutive model, the current paper introduces a zero-length element that computes the localized member-end deformations accounting for the bond-slip response at each reinforcing bar of a given RC section. Along with the material properties and anchorage conditions, the proposed nonlinear model also accounts for cyclic degradation and rebar yielding effects. Validation studies conducted with the proposed numerical formulation reveal a good agreement with past experimental tests, evidencing an important stability and accuracy at the expense of an acceptable additional computational effort.
Year: 2017
Number Pages:
12p.
Author(s): Sousa, R.; Correia, A.A.; Almeida, J.P.; Pinho, R.
Editor: ACHISINA, IAEE
Keywords: Nonlinear analysis; Frame; Reinforced concrete; Bond-slip
|
Books
Info
Historical earthquake-resistant timber framing in the mediterranean area
This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe
Year: 2016
Number Pages:
468p.
Author(s): Cruz, H.; Saporiti Machado, J.; Campos Costa, A.; Candeias, P.; Catarino, J. M.
Editor: Springer
Volume:
Vol. 1.
Keywords: Heart 2015 Conference; Historic Masonry; Performance-based Assessment; Structural Health Monitoring; Timber-Framed Construction Systems; Seismic-Resistant Timber Frames; Historical Constructive Analysis; Historical Timber-Framed Walls
Info
Assessment of the seismic capacity of stone masonry walls with block models
The applications of discrete elements models based on rigid block formulations to the analysis of masonry walls under horizontal out-of-plane loading is simplified block pattern are addressed. Two procedures for creating irregular block systems are presented, one using Voronoi polygons, the other based on a bed and cross joint structure with random deviations. A test problem provides a comparison of various regular and random block patterns, showing their influence on the failure loads. The estimation of manual frequencies of rigid block models, and its application to static pushover analyses, is addressed. An example of application of rigid block model to wall capacity problem is presented.
Year: 2011
Number Pages:
221-236pp.
Author(s): Lemos, J. V.; Campos Costa, A.; Bretas, E. M.
: Computational Methods in Earthquake Engineering
Editor: Springer
Volume:
Vol. 21.
Keywords: RTigid blocks; Discrete elements; Seismic assessment; Masonry structures
Info
Earthquake disaster scenario prediction and loss modelling for urban areas
The overall aim of Sub-Project 10 (Earthquake disaster scenario predictions and loss modelling for urban areas) has been to create a tool, based on state-of-the-art loss modelling software, to provide strong, quantified statements about the benefits of a range of possible mitigation actions, in order to support decision-making by urban authorities for seismic risk mitigation strategies. A further larger aim has been to contribute to a seismic risk mitigation policy for future implementation at European level. Among the European cities for which loss estimation studies have been carried out are Istanbul, Lisbon and Thessaloniki, and tools, using GIS mapping, have been developed by research teams in each of these cities; these were made available for further development to examine mitigation strategies within SP10. Related research studies
Year: 2007
Number Pages:
180p.
Author(s): Campos Costa, A.; Carvalho, A. M.
Editor: IUSS Press
Keywords: Shaking scenarios
Info
European manual for in-situ assessment of important existing structures. LessLoss Sub Project 5-In-situ assessment, monitoring and typification of buildings and infrastructure
Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. One European result is EN 1998, which will be in several years the main seismic code for all European countries. But it is well known, that older existing structures cause in many large earthquakes much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical - structures and lifeline structures must have priority. In September 2004 the European Integrated Research Project LESSLOSS on Risk Mitigation for Earthquakes and Landslides was started. The project will run for three years and comprises 13 Sub-Projects (SP´s). The consortium consists of 46 partners (see http:\\www.lessloss.org). LESSLOSS SP5 is on In-situ Assessment, Monitoring and Typification of buildings and Infrastructure. The project partners of SP5 are ARS, CESI, LNEC, RWTH and VCE. This Sub Project focuses mainly on the assessment of important existing structures and tries to integrate experimental methods into the assessment procedure. The progress of SP5 obtained in the first year is summarized in this paper. Highlights presented by all partners are mentioned and the assessment of Hospital Innsbruck is presented in more detail. The most innovative task of LESSLOSS/ SP5 is Update of vulnerability estimates via monitoring, which was also started in the first year.
Year: 2007
Number Pages:
195p.
Author(s): Campos Costa, A.; Candeias, P.; Mendes, L.; Flesch, R.; Pellegrini, R.; Friedl, H.; Hoffmeister, B.; Oppe, M.; Veit-Egerer, R.; Wenzel, H.; Eusebio, M.
Editor: IUSS Press
Keywords: Structures; Earthquake
Info
Modal analysis from ambient vibration survey of bridges: LNEC experience
In order to study the behavior of bridge structures in relation to traffic, wind and seismic loads, it is extremely important to know their actual dynamic properties (natural frequencies, vibration mode shapes and damping). The experimentally identified dynamic properties of bridge structures are also an effective way to characterize their actual global structural behavior. Whether included in the reception load tests of recently built bridges, before they are opened to the traffic, or as part of the inspection works of bridges already in service, LNEC has performed modal analysis studies based on the results of ambient vibration tests. Some of the studies carried out recently in important bridges are reported in this paper.
Year: 1999
Number Pages:
712-718pp.
Author(s): Rodrigues, J.; Campos Costa, A.
: Proceedings of the 17th International Modal Analysis Conference : February 8 - 11, 1999 / IMAC XVII.
Editor: SEM
Volume:
Vol. 3727.
Keywords: Dynamic properties; Bridge structures
Info
O Sismo de Northridge, Los Angeles, de 17 Janeiro de 1994. Ensinamentos para Portugal.
O sismo de Northridge ocorreu na parte norte da área metropolitana de Los Angeles, Califórnia, às 4:31 h do dia 17 de janeiro, uma segunda-feira coincidente com dia de feriado nacional, tendo atingindo uma magnitude de 6.6 na escala de Richter. O número total de vítimas mortais cifra-se em 57, havendo para cima de 8 000 feridos e 20 000 desalojados.As estimativas de perdas totais, feitas em meados de fevereiro de 1994, apontavam para valores de 15 biliões de US dólares, tendo o Estado da Califórnia apresentado um impacto económico total de ordem dos 30 biliões de dólares, perto do valor do Orçamento Geral do estado Português para 1994. Os prejuízos infligidos na indústria e no comércio são também surpreendentemente elevados, exigindo longos períodos de interrupção das atividades económicas.
Year: 1995
Number Pages:
165p.
Author(s): Oliveira, C.S.; Costa, A.; Campos Costa, A.; Azevedo, J.; Delgado, R.M.
Editor: IST e FEUP
Keywords: Northridge earthquake; Earthquake effects
|
Capítulo de Livro
Info
Shaping favorable beliefs towards seismic protection through risk communication: A pilot-experience in two Lisbon schools (Portugal).
Communicating science within disaster risk reduction using methods that encourage two-way dialogue between scientists and laypersons is a challenging task. This paper aims at presenting a methodological strategy of communicating risk and non-structural seismic protection measures through participatory approach. Such methodological strategy is part of a pilot experience of risk communication in two schools in Lisbon (Portugal) under the EU project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements). The efficacy of education for seismic safety is often inhibited by an incomplete understanding of the process by which individuals decide to protect themselves from harm (Becker JS, Paton D,Johnston DM, Ronan KR. Nat Hazards 64(1):107
Year: 2019
Number Pages:
445-458pp.
Author(s): Silva, D. S.; Vicente, M.; Pereira, A.; Candeias, P.; Ferreira, M.A.; Oliveira, C.S.; Bernardo, R.; Lopes, M.; Henriques, P.
: Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics
Editor: Springer Link
Volume:
Volume 47.
Keywords: Non-structural; Protective behaviours; Risk communication; Seismic risk
Info
Characterization of timber masonry walls with dynamic tests
Most of the Lisbon 18th century timber-framed masonry
Year: 2018
Number Pages:
299-309pp.
Author(s): Gonçalves, A.; Candeias, P.; Guerreiro, L.; Ferreira, J.; Campos Costa, A.
: Historical earthquake-resistant timber framing in the mediterranean area
Editor: Springer
Volume:
Vol. 1.
Keywords: Shaking table tests; Timber-masonry walls;
Info
KnowRISK practical guide for mitigation of seismic risk due to non-structural components
Good performance of non-structural elements can be decisive in saving lives and costs when an earthquake strikes. The European project KnowRISK aims to educate and encourage households to take the necessary precautionary measures to protect people, houses, and contents. Preparedness and prevention act on community resilience. Within the KnowRISK project, the idea of a Practical Guide has been conceived suggesting seismic mitigation solutions for non-structural components to non-experts stakeholders. It is intended to guide people into the first steps of prevention in a straightforward manner, minimizing or avoiding injuries, damage, and long-term financial consequences. The novelty of the Guide belongs to his philosophy: a path through increasing challenges corresponds to a growing level of safety. The idea is that anyone can mitigate seismic risk in its own environment by adopting simple and low cost measures. The Practical Guide may contribute to increase risk awareness. This kind of initiatives if undertaken at larger scales may also enhance social resilience.
Year: 2018
Number Pages:
309-321pp.
Author(s): Ferreira, M.A.; Oliveira, C.S.; Lopes, M.; Musacchio, G; Candeias, P.; Vicente, M.; Silva, D. S.; O
: Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics
Editor: Springer Link
Volume:
Volume 47.
Keywords: Practical guide; Community resilience; Preparedness; Non-structural elements
Info
Elastic and inelastic analyses of frames with a force-based higher-order 3D beam element accounting for axial-flexural-sheartorsional interaction
When one of the dimensions of a structural member is not clearly larger than the two orthogonal ones, engineers are usually compelled to simulate it with refined meshes of shell or solid finite elements that typically impose a large computational burden. The alternative use of classical beam theories, either based on Euler-Bernoulli or Timoshenko
Year: 2016
Number Pages:
109-128pp.
Author(s): Correia, A.A.; Almeida, J.P.; Pinho, R.
: Computational Methods in Applied Sciences
Editor: Springer
Volume:
Vol. 3.
Keywords: Inelastic response; Boundary conditions; Flexural-shear-torsional interaction; Higher-order; Force-based; Beam element
Info
A finite-fault modeling of the 1755 Lisbon earthquake sources
A non
Year: 2009
Number Pages:
433-454.
Author(s): Carvalho, A. M.; Campos Costa, A.; Sousa Oliveira, C.
Editor: L.A. Mendes-Victor et al. (eds)
Keywords: Earthquake scenarios; Finite-fault modeling
Info
Simulating earthquake scenarios in the european project Lessloss: the case of Lisbon
N/A
Year: 2009
Number Pages:
233-243.
Author(s): Zonno, G.; Carvalho, A. M.; Franceschina, G.; Akinci, A.; Campos Costa, A.; Coelho, E.; Cultrera, G.; Pacor, F.; Pessina, V.; Cocco, M.
Editor: L.A. Mendes-Victor et al. (eds)
Keywords: Earthquake scenarios
Info
Shaking table testing
This text reflects the first of the four lectures that the author has presented at Udine, Italy, at CISM
Year: 2008
Number Pages:
165-196pp.
Author(s): Bairrão, R.
Editor: Springer Verlag
Keywords: Shaking table testing
|
Tese de Doutoramento
Info
Modelos estocáticos para a caracterização da acção sísmica em Portugal Continental
Um dos principais problemas e interesses da engenharia sísmica é a caracterizaçãoda acção sísmica, envolvendo a estimativa da intensidade, conteúdo em frequência,duração e variabilidade espacial dos movimentos intensos do solo mais gravosos, emtermos dos seus efeitos nas estruturas, que pode ocorrer num local.O presente trabalho de investigação desenvolve e aplica a metodologia estocástica etécnicas de modelação de fonte
Year: 2009
Author(s): Carvalho, A. M.
Keywords: Portugal continental; Risco sísmico; Fonte sísmica; Modelos estocásticos; Acção sísmica
Info
Risco sísmico em Portugal Continental
Os sismos são encarados frequentemente como desastres naturais inevitáveis. Todavia,deveriam ser considerados fenómenos naturais, cujos efeitos adversos podem ser minimizadoscaso se proceda a uma gestão efectiva do risco sísmico.O objectivo principal do presente trabalho de investigação é o de avaliar o risco sísmicoem Portugal Continental.Sendo um tema de natureza multidisciplinar, apresentam-se e discutem-se modelos deavaliação probabilística da perigosidade sísmica e sua desagregação, de vulnerabilidade efragilidade sísmicas de tipologias construtivas, de danos e de perdas económicas e humanas.Aplica-se a análise probabilística da perigosidade sísmica, e sua desagregação, aPortugal Continental, obtendo-se cenários modais capazes de reproduzir os níveis deperigosidade que os condicionam. Apresenta-se o inventário do parque habitacional e seushabitantes, descriminado por factores de vulnerabilidade, e classifica-se a sua vulnerabilidadesegundo os modelos de dano. Procede-se à actualização e aferição de uma metodologia parasimulação de cenários sísmicos, integrada num Sistema de Informação Geográfico. Avalia-seo risco sísmico, seguindo diversas abordagens, comparando-se os resultados com o risco deoutros países.Construiu-se assim uma ferramenta de avaliação de perdas devidas a sismos, queconstitui uma primeira contribuição para o desenvolvimento de um processo de gestão dorisco sísmico aplicado ao Continente Português.
Year: 2009
Author(s): Sousa, M. L.
Info
Avaliação da vulnerabilidade sísmica de edifícios de alvenaria
O parque habitacional de Portugal Continental contém algumas tipologias construtivas deelevada vulnerabilidade sísmica em relação às quais urge actuar no sentido de reduzir o riscosísmico a elas associado. No projecto de investigação
Year: 2008
Author(s): Candeias, P.
Keywords: Reforço sísmico; Vulnerabilidade sísmica; Ensaios sísmicos; Edifícios
|
Relatório Científico
Info
Avaliação de risco sísmico do edifício Sede I da EDP - Ensaios in situ de caracterização dinâmica e do comportamento mecânico da estrutura do edifício relatório final
O presente estudo teve como objetivo a caracterização dinâmica e do comportamento mecânico da estrutura do edifício Sede I da EDP, para uma adequada simulação do seu comportamento sísmico. Neste relatório descrevem-se os ensaios de identificação dinâmica in situ realizados, com base em vibrações ambiente e em vibrações forçadas, com o objetivo de recolher informação sobre as propriedades dinâmicas da estrutura como um todo e das suas lajes dos pisos elevados em particular. Foi efetuado o registo e a análise dos sinais de aceleração devido a vibração ambiente, medidos em diversos pontos do edifício, bem como devido a vibrações forçadas impostas num dos pisos enterrados do edifício. São também apresentados e analisados os ensaios de caracterização do comportamento mecânico de componentes estruturais relacionadas com a ligação das lajes mistas dos pisos elevados às paredes dos núcleos resistentes de betão armado do edifício. Estes consistem em ensaios destrutivos de troços de laje mista ligados aos núcleos, por meio de varões selados à parede, e em ensaios de arrancamento desses varões, tendo como objetivo caracterizar os materiais e componentes dos elementos estruturais. Esta informação é essencial para a posterior calibração dos modelos numéricos da estrutura e para uma realista simulação do seu comportamento sísmico, bem como para uma eventual deteção de anomalias estruturais decorrentes de patologias que possam comprometer o desempenho do edifício face à ocorrência de sismos.
Year: 2022
Author(s): Correia, A.A.; Candeias, P.; Ribeiro, F.; Gomes, J. P.
Keywords: Comportamento mecânico; Ensaios in situ; Vibração ambiente; Vibração forçada; Identificação dinâmica
Info
Metodologia para a avaliação da segurança sísmica de edifícios existentes baseada em análises de fiabilidade estrutural - Edifícios de betão armado
A avaliação da segurança sísmica de edifícios existentes tem como quadro de referência o Eurocódigo 8
Year: 2019
Author(s): Sousa, R.; Campos Costa, A.; Costa, A.
Keywords: Análise de fiabilidade estrutural; Metodologias expeditas; Avaliação da segurança sísmica; Edifícios existentes
Info
Mapas de perigosidade sísmica para Portugal Continental: Uma análise crítica - Parte I
Nos estudos probabilísticos para avaliação da perigosidade sísmica, são estabelecidas zonas de geração sísmica (zonas sismogénicas), representando regiões que partilham as mesmas caraterísticas sismológicas, tectónicas e geológicas e definidas as relações entre a frequência com que aí ocorrem os sismos e as respetivas magnitudes, num dado período de tempo. Em 2006, para o Anexo Nacional do Eurocódigo 8, foram consideradas e caraterizadas 11 zonas Sismogénicas para Portugal continental, adaptadas de estudos previamente elaborados em 1996. Entre 2008 e 2009, no âmbito dos projetos ERSTA e SHARE, foram propostas novas zonas sismogénicas, e estimados os respetivos parâmetros da lei de frequência - magnitude. Estas diferentes propostas resultaram em diferentes mapas de perigosidade sísmica para Portugal continental. A SPES, Sociedade Portuguesa de Engenharia Sísmica, espelhando a inquietude existente na comunidade científica face às diversas expressões da perigosidade sísmica em Portugal, e consciente da necessidade de um consenso perante os agentes decisores, considerou urgente a realização de um estudo criterioso acerca das opções tomadas, nos diferentes estudos, e suas implicações. É nestecontexto que surge este trabalho, que pretende fazer uma análise crítica e comparativa dos resultadosobtidos nos diferentes estudos mencionados e as suas implicações ao nível dos períodos de retorno para sismos de maior magnitude. Numa parte II, serão estudadas as implicações em termos de valores da perigosidade sísmica, para vários períodos de retorno e frequências espetrais.
Year: 2018
Author(s): Carvalho, A. M.; Malfeito, N.
Keywords: Sismos; Períodos de retorno; Perigosidade sísmica
Info
Segurança estrutural e sísmica das construções nas intervenções de reabilitação - Enquadramento jurídico da reabilitação urbana síntese dos instrumentos jurídicos e conceitos relevantes
O presente relatório, elaborado no âmbito de um estudo em curso no LNEC sobre a segurança sísmica das construções nas intervenções de reabilitação, sintetiza os instrumentos jurídicos e os conceitos relevantes para a análise do atual regime jurídico da reabilitação urbana (RJRU), e do regime excecional de reabilitação urbana (RERU).
Year: 2015
Author(s): Coelho, E.
Keywords: Instrumentos legais; Reabilitação urbana; Segurança sísmica
Info
Assessment of innovative solutions for non
This document reports the outcomes of the research project
Year: 2013
Author(s): Correia, A.A.; Candeias, P.; Campos Costa, A.; Coelho, E.; Vintzileou, E.; Palieraki, V.; Lourenço, P.; Leite, J.
Keywords: Innovative test setup; Shaking table test; Wire mesh coating reinforcement; Bed joint reinforcement; Reinforced concrete frames; Non-load bearing masonry enclosures
Info
Seismic performance of multi-storey timber buildings - Rusticasa building
This document reports the outcome of the seismic test on the Rusticasa building, the first in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a log house system (LHS). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.
Year: 2013
Author(s): Campos Costa, A.; Candeias, P.; Lourenço, P.; Branco , J.; Aranha, C.
Keywords: Steel connectors; Shaking table test; Log house system (LHS); Timber buildings
Info
Seismic performance of multi-storey timber buildings - LegnoCase building
This document reports the outcome of the seismic test on the LegnoCase building, the second in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a platform frame system with sheathing assembled by means of OSB panels (PF-OSB). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.
Year: 2013
Author(s): Campos Costa, A.; Candeias, P.; Piazza, M.; Bartolucci, C.; Tomasi, R.; Grossi, P.
Keywords: Shaking table test; Steel connectors; OSB panels; Timber buildings
Info
Seismic performance of multi-storey timber buildings - Rubnerhaus building
This document reports the outcome of the seismic test on the RubnerHaus building, the third in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a platform frame system with sheathing assembled by means of gypsum fibre panel (PF-GF). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.
Year: 2013
Author(s): Campos Costa, A.; Candeias, P.; Piazza, M.; Tomasi, R.; Grossi, P.
Keywords: Shaking table test; Steel connectors; Gypsum fibre panel (PF-GF); Timber buildings
Info
Seismic performance of multi-storey timber buildings - TUGraz building
This document reports the outcome of the seismic test on the TUGraz building, the fourth in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a cross laminated system (CTL). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.
Year: 2013
Author(s): Campos Costa, A.; Candeias, P.; Schickhofer, G.; Flatscher, G.
Keywords: Shaking table test; Steel connectors; Cross laminated system (CTL); Timber buildings
Info
The LNEC earthquake engineering testing facility. Background information: LNEC testing facility, testing setup and protocol and data processing
The TIMBER BUILDINGS Project, led by the University of Trento, included testing of four full scale multi-story timber houses with a realistic horizontal plan and three types of timber housing systems: platform frame system (PFS), log house system (LHS) and cross laminated timber (CLT). The tests were carried in the LNEC-3D shake table under different levels of excitation and different conditions of the structure.The tests were carried with the goal of assessing the seismic performance of the buildings, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.The results were presented in separate reports, one for each building. This document contains information common to the remaining four reports.
Year: 2013
Author(s): Campos Costa, A.; Candeias, P.; Piazza, M.; Tomasi, R.; Lourenço, P.; Branco , J.; Schickhofer, G.; Flatscher, G.
Keywords: Equipment; Shaking Table; Timber buildings
|
Outro
Info
Sensibilidade climática, capacidade adaptativa e de vulnerabilidades atuais e futuras da AML
Análise dos registos históricos de eventos climáticos e o seu impacto no setor da energia da AML, para identificar o grau em que este setor foi afetado por estímulos relacionados com o clima. Avaliação de capacidades adaptativas.
Year: 2019
Author(s): Marques da Silva, F.; Pinto, A.; Machado, P.
Keywords: Energia; Alterações climáticas
Info
A propósito da forma na engenharia do vento
Análise da forma das edificações nas ações do vento
Year: 2018
Author(s): Marques da Silva, F.
Keywords: Engenharia do vento; Aerodinãmica
Info
Forma e desenho urbano - efeitos na ventilação
As condicionantes arquitetónicas e de urbanização na ventilação natural
Year: 2018
Author(s): Marques da Silva, F.
Keywords: Engenharia do vento; Ventilação
Info
Wind and structures
Caracterização do vento. Ações sobre estruturas. Ensaios em túnel de vento
Year: 2017
Author(s): Marques da Silva, F.
Keywords: Wind tunnel; Actions on structures; Wind engineering
|