Papers
Info
Direct displacement-based design for RC structures
In the early nineties, the Performance-Based Seismic Engineering (PBSE) principles have been introduced in the seismic design of structures. Several authors have identified the limitations of traditional force-based design (FBD) procedures widespread in most of the design codes to accomplish the PBSE requirements. Therefore, various contributions were made towards the development of displacement-based seismic design methodologies, in particularly the one proposed by Priestley, known as "Direct Displacement-Based Design" (DDBD). The purpose of this work is to investigate the DDBD approach in its entirety. In particular, the emphasis is set herein on the definition of the equivalent viscous damping and on the concrete impact of choosing one or another expression. Then, the efficiency of applying DDBD to reinforced concrete (RC) plane frames and dual frame-wall structures is assessed and the consequences of using the linear response spectrum suggested in the Eurocode 8 as input data is investigated.
Year: 2018
Number Pages:
67-88pp.
Author(s): Massena, B.; Degée, H.; Candeias, P.; Bento, R.
: Revista Portuguesa de Engenharia de Estruturas (rpee)
Editor: LNEC
Volume:
Série III, N.º 6.
Keywords: Reinforced concrete buildings; Equivalent viscous damping; Direct displacement-based design
Info
Influência do número de sheds e da distância horizontal entre eles no desempenho da ventilação natural
A ventilação natural é uma eficiente estratégia para o condicionamento térmico passivo de edificações, e muitas vezes o seu potencial está relacionado às decisões em projeto diferentes do modelo convencional. Um exemplo são os sheds, aberturas na cobertura que funcionam como captadores ou extratores de ar, dependendo de sua localização em relação aos ventos dominantes. O objetivo do artigo é avaliar a influência do número de sheds e da distância entre eles no desempenho da ventilação natural. Os ângulos de incidência dos ventos analisados foram 0º, 45º, 135º e 180º. A metodologia adotada foi simulação por Dinâmica dos Fluidos Computacional (CFD), utilizando o software CFX. Os resultados indicam que o aumento do número de sheds reduz a renovação de ar interna para as situações de extração e captação de ar. Por outro lado, o aumento da distância entre esses dispositivos, incrementa o fluxo de ar interno para os sheds captadores. No entanto, teve-se uma redução na renovação de ar para os sheds extratores de ar. Isso ocorre pela redução da área total das abertiras de saída de ar, que apresenta uma influência na vazão volumétrica do edifício. Nos sheds captadores de ar o incremento ocorre, pois, apesar do aumento da distância ter reduzido o número das aberturas de entrada de ar, torna os sheds mais efetivos para captar o fluxo de ar.
Year: 2018
Number Pages:
161-176pp.
Author(s): Lukiantchuki, M.; Shimomura, A.; Marques da Silva, F.; Caram, R.
: Ambiente Construído
Editor: ANTAC (Associação Nacional de Tecnologia do Ambiente Construído)
Volume:
vol.18 no.2.
Keywords: Ventilação Natural; CFD
Info
Seismic vulnerability assessment of a RC pedestrian crossing
The paper addresses the seismic vulnerability assessment of a multispan footbridge, prone to span unseating due to shorter seat lengths. The structure is representative of a series of pedestrian crossings located in the Southern part of Portugal, a region with a relevant seismicity. A probabilistic approach allows considering the variability of the seismic action and uncertainties in the definition of the material properties and/or structural behavior. Based on incremental dynamic analyses and corresponding fragility curves, it is shown that, for code compliance design acceleration, there is a significant probability that the structure will only suffer minor damage.
Year: 2018
Number Pages:
18p.
Author(s): Cismasiu, C.; Santos, F.; Perdigão, R.; Bernardo, V.; Candeias, P.; Carvalho, A. M.; Guerreiro, L.
: Journal of Earthquake Engineering
Editor: Taylor & Francis
Keywords: Dowel connection; Fragility curves; Incremental dynamic analysis; Operational modal analysis; Seismic vulnerability assessment; Rc footbridges
Info
Seismic vulnerability assessment of a RC pedestrian crossing
The paper addresses the seismic vulnerability assessment of a multi-span footbridge, prone to span unseating due to shorter seat lengths. The structure is representative of a series of pedestrian crossings located in the Southern part of Portugal, a region with a relevant seismicity. A probabilistic approach allows considering the variability of the seismic action and uncertainties in the definition of the material properties and/or structural behavior. Based on incremental dynamic analyses and corresponding fragility curves, it is shown that, for code compliance design acceleration, there is a significant probability that the structure will only suffer minor damage.
Year: 2018
Number Pages:
18p.
Author(s): Cismasiu, C.; Santos, F.; Bernardo, V.; Candeias, P.; Carvalho, A. M.; Guerreiro, L.; Perdigão, Rui A. Silva
: Journal of Earthquake Engineering
Editor: Taylor & Francis
Keywords: Dowel connection; Fragility curves; Incremental dynamic analysis; Operational modal analysis; Seismic vulnerability assessment; Rc footbridges
Info
Shake table blind prediction tests: Contributions for improved fiber-based frame modelling
Distributed plasticity Euler-Bernoulli fiber beams are regularly used byresearchers and practitioners to simulate the nonlinear seismic responseof reinforced concrete framed structures. This study presents a sensitivityanalysis, combining newly proposed and existing goodness-of-fitmeasures, to identify commonly used engineering modeling optionsthat most critically influence the response accuracy. The dynamic behaviorof three distinct structures tested in international blind predictionchallenges is considered. Sensitivity parameters include equivalent viscousdamping, element formulation, strain penetration effects, andmaterial models. The results are critically discussed in light of theoreticalshortcomings of the model assumptions.
Year: 2018
Number Pages:
42p.
Author(s): Sousa, R.; Almeida, J.P.; Correia, A.A.; Pinho, R.
: Journal of Earthquake Engineering
Editor: Taylor & Francis
Keywords: Material models; Strain penetration; Equivalent viscous damping; Fiber element formulation; Sensitivity analysis; Reinforced concrete frames; Shake table tests; Numerical validation
Info
Simulation and measurements of wind interference on a solar chimney performance
The solar chimney is a stack-induced ventilation strategy used to improve thermal performance in buildings. Besides operating via a buoyancy-driven airflow, even low velocity winds can affect the chimney functioning in both positive and negative ways. In technical literature, though, few studies have considered the influence of windspeed and direction, as well as discharge coefficients and wind pressure coefficients. This paper investigates the effects of wind interference on a solar chimney performance, through different scenarios of wind speed and direction, over a base case model. Wind tunnel experiments and computer simulations using EnergyPlus were carried out to perform qualitative and quantitative analyses of the airflow, as a function of the combined effect of thermal and wind components. Results showed that the airflow rate and distribution pattern at the outlet openings of the solar chimney are influenced by either the thermal gradients and, mainly, by the outdoor windvelocity and direction. A significant reduction in the volumetric flow rate of the chimney is observed due to wind incidence opposite to the inlet opening, even at low velocities, such as 0.6 m/s.
Year: 2018
Number Pages:
135-145pp.
Author(s): Neves, L.; Marques da Silva, F.
: Journal of wind engineering and industrial aerodynamics
Editor: Elsevier
Volume:
179.
Keywords: Wind tunnel; Buoyancy; Solar chemney
Info
Caracterização do comportamento sísmico de edifícios de betão armado representativos do edificado português sem dimensionamento sismorresistente
Uma parte significativa do edificado em Portugal não foi dimensionada para resistir a ações sísmicas. Como tal, o recente impulso do sector da reabilitação pode representar uma oportunidade única para promover a redução da vulnerabilidade sísmica dos edifícios existentes. Neste contexto, o presente trabalho apresenta uma metodologia para avaliar a vulnerabilidade sísmica duma classe de edifícios de betão armado que permite estabelecer indicadores simplificados do seu desempenho estrutural expectável. A metodologia proposta baseia-se num estudo numérico detalhado do comportamento sísmico de edifícios de betão armado com características representativas duma parte significativa do edificado deste tipo em Portugal, simulando de forma adequada os principais aspetos da sua resposta estrutural. Os resultados obtidos pela metodologia desenvolvida permitem identificar as principais vulnerabilidades do edificado e quantificar indicadores de desempenho estrutural que permitem avaliar de forma expedita a sua segurança estrutural.
Year: 2017
Number Pages:
105-114pp.
Author(s): Sousa, R.; Costa, A.; Campos Costa, A.; Candeias, P.; Romão, X.
: RPEE
Editor: LNEC
Volume:
Série III, N.º 3.
Keywords: Indicador de desempenho estrutural; Comportamento sísmico; Betão armado; Reabilitação
Info
Carga aerodinâmica em sombreamentos em cascata
A arquitetura recorre, por vezes, a dispositivos de sombreamento de grandes dimensões, com formas e configurações de montagem cuja resposta à ação do vento carece de caracterização. Este facto condiciona o correto dimensionamento dos apoios e, em menor escala, a determinação do próprio material de construção dos dispositivos.As dimensões dos elementos constituintes destes dispositivos dificultam o recurso a ensaios com modelos reduzidos pelo que se recorreu a um modelo seccional do dispositivo à escala real, sujeito ao escoamento proveniente de um túnel de vento de jacto livre. As características específicas deste ensaio, nomeadamente a geometria do perfil de sombreamento e respetivos suportes, gama de forças e a necessidade de minimizar a obstrução adicionada pela instrumentação ao escoamento, ditaram o desenvolvimento de uma solução particular para a medição das forças aerodinâmicas.O ensaio permitiu avaliar as cargas induzidas pelo escoamento para vários ângulos de incidência fazendo variar a inclinação do modelo relativamente ao jacto através de um suporte articulado onde se montou o modelo seccional, permitindo assim caracterizar o desempenho aerodinâmico do perfil na aplicação em estudo.
Year: 2017
Number Pages:
8p.
Author(s): Marques da Silva, F.; Morais, P.; Pereira, I.; Bairrão, R.; Morais, J.
: Mecânica Experimental
Editor: APAET
Volume:
nº 29.
Keywords: Cascatas; Ação do vento
Info
Shape memory alloy based dampers for earthquake response mitigation
This paper describes the development process and initial tests performed with a new energy dissipation damper based on Shape Memory Alloy (SMA) wires. The aim of this study was to develop a new iteration of this type of devices, and eventually develop a methodology to properly design them for any type of application. The underlying concept of our device is the use of a double counteracting system of pre-strained SMA wire sections as the dissipating component. By using pre-strained wires, this design focuses on maximizing energy dissipation, partially relinquishing the re-centering capabilities of the device.The experimental part was performed on a downscaled prototype based on this design methodology. The goal of this study was to validate the basic mechanical concepts. The device was subjected to a considerable number of load cycling tests, in order to better characterize the SMA wire behavior when used in this arrangement and to improve our understanding of their influence on the device's capabilities.
Year: 2017
Number Pages:
705-712pp.
Author(s): Morais, J.; Gil de Morais, P.; Santos, C.; Campos Costa, A.; Candeias, P.
: Procedia Structural Integrity
Editor: Elsevier
Volume:
Vol. 5.
Keywords: Earthquake Response; Shape Memory Alloy; Vibration Damper
Info
Application of SASHA to seismic hazard for Portugal mainland.
In the frame of the UPStrat-MAFA
Year: 2016
Number Pages:
1827
Author(s): Carvalho, A. M.; Albarello, D.
: Bulletin of Earthquake Engineering
Editor: Springer
Volume:
Volume 14, Issue 7.
Keywords: Portugal; Macroseismic intensity; Seismic hazard
|
Comunicação
Info
Equações de previsão dos movimentos sísmicos à superfície para o Arquipélago dos Açores.
Utilizam-se modelos estocásticos para a simulação dos movimentos sísmicos intensos do solopara construção de uma base de dados sintética de registos que se crêem representativos dosmovimentos do solo no Arquipélago dos Açores, no substrato rochoso.De modo a considerar a influência das condições locais do terreno, foram considerados: (i)perfis geotécnicos sintéticos, para cada tipo de terreno do Anexo Nacional do Eurocódigo 8, (ii)o modelo de propagação vertical de ondas S com polarização horizontal associado a umacoluna estratigráfica com interface inferior materializada por um semi-espaço elástico rochoso e(iii) o método linear equivalente para considerar de forma aproximada a resposta não linear dossolos.Tais simulações permitiram criar uma base de dados sintética de registos sísmicos à superfície,para as gamas de frequência, magnitude e distância hipocentral de interesse para aengenharia, permitindo a elaboração de equações de previsão dos movimentos do solo, paraos diferentes tipos de terreno referidos no Anexo Nacional do EC8, para o Arquipélago dosAçores.
Year: 2014
Number Pages:
14p.
Author(s): Carvalho, A. M.; Bilé Serra, J.; Malfeito, N.
Editor: LNEC
Keywords: Equações de Previsão de Movimentos.; Coeficientes de Atenuação; Movimentos à Superfície nos Açores; Propagação unidimensional de Energia Sísmica
Info
Evolution of earthquake losses in portuguese residential building stock
The objective of this paper is to analyse the evolution of expected earthquake losses in Portuguese residential buildings, to determine if their natural regeneration originates the mitigation of the seismic risk, although exposure in the region increased over time. To achieve this goal, the evolution of quantified risk measures was evaluated, based on the surveys of the residential building stock obtained in the 2001 and 2011 Portuguese census. This study provides a global perspective of the seismic risk on the Portuguese mainland, and makes possible the comparison of risk levels between different regions and epochs. The comparison of economic losses obtained in these two different moments in time, took into consideration the inflation rate, and led to the conclusion that the natural regeneration of the residential housing stock contributed to the mitigation of seismic risk, even if there was a significant increase in the exposure.
Year: 2014
Number Pages:
9p.
Author(s): Luísa Sousa, M.; Campos Costa, A.
Editor: Turkish Earthquake Foundation
Keywords: Seismic risk
Info
Full-scale seismic testing of modern unreinforced thermal insulation clay block masonry houses
In the scope of the transnational access activities of the European research project SERIES, the Laboratório Nacional de Engenharia Civil (LNEC) has provided access to its 3-D shaking table to the international construction company Wienerberger AG and to a group of European experts, in order to perform full-scale seismic tests on an industrial solution for buildings using a modern unreinforced thermal insulation clay block masonry structure.Such solution represents a very common construction method in Central Europe and, although there are cyclic shear test results available, its effective dynamic response under seismic events still requires experimental validation. For this purpose, two full-scale mock-ups with different geometries were tested on the 3-D shaking table using a series of seismic records with increasing intensity.This paper focuses on the most relevant experimental results regarding the structural response of the specimens, e.g., the dynamic response evolution, the collapse mechanism identified and the maximum drift values measured. The paper closes with the main conclusions drawn and with proposals for future developments.
Year: 2014
Number Pages:
12p.
Author(s): Candeias, P.; Mendes, L.; Correia, A.A.; Campos Costa, A.; Coelho, E.; Jäger, A.; Lu, S.; Degée, H.; Mordant, C.
Editor: Universidade do Minho
Keywords: Shaking table; Full-scale testing; Modern masonry
Info
Geração de perfis estratigráficos artificiais para o Arquipélago dos Açores.
A avaliação dos movimentos sísmicos à superfície, contemplando os efeitos de sítio, estádependente das caraterísticas geológicas dos terrenos no local em análise.Para o Arquipélago dos Açores a informação geotécnica disponível não permite umaavaliação geograficamente global da resposta sísmica dos terrenos caraterísticos destaregião.Assim, após levantamento e síntese de toda a informação disponível, foram idealizadosperfis estratigráficos sintéticos, representativos da variabilidade dos solos da região,permitindo posteriormente modelar a propagação da energia sísmica, materializada naforma de ondas de corte S, através de um meio estratificado representado por umasequência de camadas, e consequentemente, avaliar a alteração do movimento sísmicodevido à influência daquela.
Year: 2014
Number Pages:
15p.
Author(s): Carvalho, A. M.; Bilé Serra, J.; Malfeito, N.
Editor: LNEC
Keywords: Efeitos de sítio; Arquipélago dos Açores; Perfil estratigráfico
Info
Incertezas na simulação estocástica de sismos: o caso dos Açores.
A simulação estocástica tem sido utilizada, com algum grau de sucesso, para a obtenção deacelerogramas em zonas onde não existem muitos registos instrumentais de sismosintensos ocorridos no passado, e pode ser uma ferramenta importante nesse contexto.Contudo, essas simulações deverão, necessariamente, ser previamente validadas atravésde registos de sismos ocorridos no passado, dada a grande incerteza associada à definiçãode cenários sísmicos. É muito difícil prever qualquer um dos processos, complexos, degeração do sismo, de propagação da energia e dos efeitos locais, nomeadamente ascaracterísticas da rotura, designadamente o padrão de deslizamentos e a queda de tensãomédia no plano da falha, a atenuação das ondas sísmicas ao longo do percurso depropagação e a obtenção da amplificação local das camadas de solo superficial.Neste trabalho, são apresentados os resultados de diversas simulações estocásticas dosismo ocorrido nos Açores em 1998, considerando diferentes localizações da rotura,juntamente com os respetivos parâmetros, variação das características da atenuação ediferentes condições geológicas locais. Os acelerogramas simulados, e correspondentesespectros de resposta, foram comparados com os registos instrumentais do sismo, e com osresultados de leis de atenuação obtidas para a Europa e, em particular, para o arquipélagodos Açores.
Year: 2014
Number Pages:
12p.
Author(s): Carvalho, A. M.; Estêvão, J.M.C.
Editor: LNEC
Keywords: Sismo de 1998; Simulação estocástica; Açores
Info
Mechanical characterization of dry-stack interlocking compressed earth masonry
Earth has been a traditional building material to construct houses in Africa. One of the most common techniques is the use of sun dried or kiln fired adobe bricks with mud mortar. Although this technique is low-cost, the bricks vary largely in shape, strength and durability. This leads to weak houses which suffer considerable damage during floods and seismic events. A solution is the use of dry-stack masonry with stabilized interlocking compressed earth blocks (ICEB). These blocks are manufactured by compacting cement stabilized earth in a manual or hydraulic press into a mould and then air dried. The resulting blocks present uniform shapes and higher values of strength and durability. This work presents the work made in the context of the HiLoTec project. It focuses on the experimental campaign of the project to characterize the strength of ICEBs and the behaviour of dry-stack masonry.
Year: 2014
Number Pages:
12p.
Author(s): Ramos, L.; Lourenço, P.; Campos Costa, A.; Sturm, T.
Editor: Universidade do Minho
Keywords: Testing; Interlocking; Dry-stack; Compressed earth blocks; Social houses
Info
Poderão os blocos de terra compactada com estabilização fazer parte de um sistema sismo-resistente?
No âmbito do projeto HiLoTec (desenvolvimento de uma tecnologia construtiva simples, inovadora e sustentável para edifícios de pequeno porte em países em desenvolvimento) foi desenvolvido um sistema construtivo baseado na utilização de blocos de terra compactada com estabilização hidráulica e junta seca. O presente artigo apresenta os principais resultados do ponto de vista estrutural obtidos ao longo do projeto, com especial ênfase para o comportamento sísmico, lançando contribuições para a resposta à pergunta se se poderão os blocos de terra compactada com estabilização fazer um sistema sismo-resistente para construções de pequeno porte. A campanha experimental incluiu ensaios de caracterização do sistema a diferentes níveis: material (solo), bloco, prismas de alvenaria, paredes de alvenaria e um protótipo ensaiado na mesa sísmica no Laboratório Nacional de Engenharia Civil, em Lisboa.
Year: 2014
Number Pages:
16p.
Author(s): Campos Costa, A.; Lourenço, P.; Ramos, L.; Sturm, T.
Editor: LNEC
Keywords: Alvenaria; Blocos de terra compactada
Info
Processos físicos para simulação de movimentos sísmicos intensos para o arquipélago dos Açores.
A simulação de movimentos intensos do solo torna-se necessária em regiões de sismicidademoderada, onde os registos de interesse para a engenharia são escassos e insuficientes, oupara estudos que exijam especificamente registos de uma determinada magnitude edistância de interesse. O modelo estocástico, partindo do conhecimento das característicasespetrais da fonte e considerando os efeitos de propagação das ondas sísmicas no percursodesde a fonte até ao local, estima os movimentos intensos do solo em termos da suaintensidade, conteúdo em frequência duração e variabilidade espacial.Neste trabalho apresenta-se o procedimento efectuado, com base nos registos obtidos narede acelerográfica nacional, para quantificação dos parâmetros que descrevem osprocessos envolvidos na geração de movimentos intensos do solo e que são necessáriospara a aplicação do modelo estocástico. Estuda-se o processo de propagação das ondassísmicas (atenuação geométrica e inelástica), o processo de atenuação na crusta superior edeterminam-se as caraterísticas espetrais da fonte sísmica.
Year: 2014
Number Pages:
15p.
Author(s): Carvalho, A. M.; Reis, C.
Editor: LNEC
Keywords: Movimentos sísmicos; Açores; Modelos estocásticos
Info
Simplified wide-column model for the blind prediction shake table test of a U-shaped wall building
Reinforced concrete (RC) structures with tri-dimensional asymmetries tend to exhibit torsional effects that are of great concern in the field of earthquake engineering, in particular at large ductility levels where they become more relevant [MAN09]. In nuclear facilities, this issue assumes particular relevance considering that these structures are designed to respond essentially in the elastic range with a controlled level of deformations and accelerations when subjected to strong ground motions. Within the previous framework, the research project SMART 2013 (
Year: 2014
Number Pages:
11p.
Author(s): Correia, A.A.; Sousa, R.; Pinho, R.; Almeida, J.P.
Editor: Oxand
Keywords: Reinforced concrete; Wall; Wide-column model; Blind test; U-shaped
Info
Spectral-based damage identification technique on an earthen mock-up construction tested on a shaking table
Conservation of ancient built heritage plays a leading role for modern societies. Knowledge about ancient building methods, essentially based on the use of natural materials such as earth, stone and wood, is fundamental to plan interventions aimed at preserving the architectural heritage. Due to the growing research on sustainable technologies, the interest in structural systems built using natural materials has been rising more and more. Taking an earthen mock-up construction as model, the paper focuses on the dynamic behaviour of such a system tested on a shaking table. Detailed descriptions of the model, its mechanical features, the seismic test performed and the damage pattern obtained are first presented. Then, the dynamic identification of the structure during damage occurrence is performed through the decomposition of the power spectral density matrix. Damage evolution and localization are also analyzed by an index based on the complex eigenvectors estimated from the matrix. Finally, comparisons between experimental and analytical results are addressed.
Year: 2014
Number Pages:
12p.
Author(s): Lourenço, P.; Ramos, L.; Campos Costa, A.; Masciotta, M.G.; Vasta, M.; Sturm, T.
Editor: Universidade do Minho
Keywords: Earthquake; Shaking table test; Spectral-based identification technique; Damage localization; Dynamic identification; Earth construction
|
Books
Info
Historical earthquake-resistant timber framing in the mediterranean area
This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe
Year: 2016
Number Pages:
468p.
Author(s): Cruz, H.; Saporiti Machado, J.; Campos Costa, A.; Candeias, P.; Catarino, J. M.
Editor: Springer
Volume:
Vol. 1.
Keywords: Heart 2015 Conference; Historic Masonry; Performance-based Assessment; Structural Health Monitoring; Timber-Framed Construction Systems; Seismic-Resistant Timber Frames; Historical Constructive Analysis; Historical Timber-Framed Walls
Info
Assessment of the seismic capacity of stone masonry walls with block models
The applications of discrete elements models based on rigid block formulations to the analysis of masonry walls under horizontal out-of-plane loading is simplified block pattern are addressed. Two procedures for creating irregular block systems are presented, one using Voronoi polygons, the other based on a bed and cross joint structure with random deviations. A test problem provides a comparison of various regular and random block patterns, showing their influence on the failure loads. The estimation of manual frequencies of rigid block models, and its application to static pushover analyses, is addressed. An example of application of rigid block model to wall capacity problem is presented.
Year: 2011
Number Pages:
221-236pp.
Author(s): Lemos, J. V.; Campos Costa, A.; Bretas, E. M.
: Computational Methods in Earthquake Engineering
Editor: Springer
Volume:
Vol. 21.
Keywords: RTigid blocks; Discrete elements; Seismic assessment; Masonry structures
Info
Earthquake disaster scenario prediction and loss modelling for urban areas
The overall aim of Sub-Project 10 (Earthquake disaster scenario predictions and loss modelling for urban areas) has been to create a tool, based on state-of-the-art loss modelling software, to provide strong, quantified statements about the benefits of a range of possible mitigation actions, in order to support decision-making by urban authorities for seismic risk mitigation strategies. A further larger aim has been to contribute to a seismic risk mitigation policy for future implementation at European level. Among the European cities for which loss estimation studies have been carried out are Istanbul, Lisbon and Thessaloniki, and tools, using GIS mapping, have been developed by research teams in each of these cities; these were made available for further development to examine mitigation strategies within SP10. Related research studies
Year: 2007
Number Pages:
180p.
Author(s): Campos Costa, A.; Carvalho, A. M.
Editor: IUSS Press
Keywords: Shaking scenarios
Info
European manual for in-situ assessment of important existing structures. LessLoss Sub Project 5-In-situ assessment, monitoring and typification of buildings and infrastructure
Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. One European result is EN 1998, which will be in several years the main seismic code for all European countries. But it is well known, that older existing structures cause in many large earthquakes much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical - structures and lifeline structures must have priority. In September 2004 the European Integrated Research Project LESSLOSS on Risk Mitigation for Earthquakes and Landslides was started. The project will run for three years and comprises 13 Sub-Projects (SP´s). The consortium consists of 46 partners (see http:\\www.lessloss.org). LESSLOSS SP5 is on In-situ Assessment, Monitoring and Typification of buildings and Infrastructure. The project partners of SP5 are ARS, CESI, LNEC, RWTH and VCE. This Sub Project focuses mainly on the assessment of important existing structures and tries to integrate experimental methods into the assessment procedure. The progress of SP5 obtained in the first year is summarized in this paper. Highlights presented by all partners are mentioned and the assessment of Hospital Innsbruck is presented in more detail. The most innovative task of LESSLOSS/ SP5 is Update of vulnerability estimates via monitoring, which was also started in the first year.
Year: 2007
Number Pages:
195p.
Author(s): Campos Costa, A.; Candeias, P.; Mendes, L.; Flesch, R.; Pellegrini, R.; Friedl, H.; Hoffmeister, B.; Oppe, M.; Veit-Egerer, R.; Wenzel, H.; Eusebio, M.
Editor: IUSS Press
Keywords: Structures; Earthquake
Info
Modal analysis from ambient vibration survey of bridges: LNEC experience
In order to study the behavior of bridge structures in relation to traffic, wind and seismic loads, it is extremely important to know their actual dynamic properties (natural frequencies, vibration mode shapes and damping). The experimentally identified dynamic properties of bridge structures are also an effective way to characterize their actual global structural behavior. Whether included in the reception load tests of recently built bridges, before they are opened to the traffic, or as part of the inspection works of bridges already in service, LNEC has performed modal analysis studies based on the results of ambient vibration tests. Some of the studies carried out recently in important bridges are reported in this paper.
Year: 1999
Number Pages:
712-718pp.
Author(s): Rodrigues, J.; Campos Costa, A.
: Proceedings of the 17th International Modal Analysis Conference : February 8 - 11, 1999 / IMAC XVII.
Editor: SEM
Volume:
Vol. 3727.
Keywords: Dynamic properties; Bridge structures
Info
O Sismo de Northridge, Los Angeles, de 17 Janeiro de 1994. Ensinamentos para Portugal.
O sismo de Northridge ocorreu na parte norte da área metropolitana de Los Angeles, Califórnia, às 4:31 h do dia 17 de janeiro, uma segunda-feira coincidente com dia de feriado nacional, tendo atingindo uma magnitude de 6.6 na escala de Richter. O número total de vítimas mortais cifra-se em 57, havendo para cima de 8 000 feridos e 20 000 desalojados.As estimativas de perdas totais, feitas em meados de fevereiro de 1994, apontavam para valores de 15 biliões de US dólares, tendo o Estado da Califórnia apresentado um impacto económico total de ordem dos 30 biliões de dólares, perto do valor do Orçamento Geral do estado Português para 1994. Os prejuízos infligidos na indústria e no comércio são também surpreendentemente elevados, exigindo longos períodos de interrupção das atividades económicas.
Year: 1995
Number Pages:
165p.
Author(s): Oliveira, C.S.; Costa, A.; Campos Costa, A.; Azevedo, J.; Delgado, R.M.
Editor: IST e FEUP
Keywords: Northridge earthquake; Earthquake effects
|
Capítulo de Livro
Info
Shaping favorable beliefs towards seismic protection through risk communication: A pilot-experience in two Lisbon schools (Portugal).
Communicating science within disaster risk reduction using methods that encourage two-way dialogue between scientists and laypersons is a challenging task. This paper aims at presenting a methodological strategy of communicating risk and non-structural seismic protection measures through participatory approach. Such methodological strategy is part of a pilot experience of risk communication in two schools in Lisbon (Portugal) under the EU project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements). The efficacy of education for seismic safety is often inhibited by an incomplete understanding of the process by which individuals decide to protect themselves from harm (Becker JS, Paton D,Johnston DM, Ronan KR. Nat Hazards 64(1):107
Year: 2019
Number Pages:
445-458pp.
Author(s): Silva, D. S.; Vicente, M.; Pereira, A.; Candeias, P.; Ferreira, M.A.; Oliveira, C.S.; Bernardo, R.; Lopes, M.; Henriques, P.
: Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics
Editor: Springer Link
Volume:
Volume 47.
Keywords: Non-structural; Protective behaviours; Risk communication; Seismic risk
Info
Characterization of timber masonry walls with dynamic tests
Most of the Lisbon 18th century timber-framed masonry
Year: 2018
Number Pages:
299-309pp.
Author(s): Gonçalves, A.; Candeias, P.; Guerreiro, L.; Ferreira, J.; Campos Costa, A.
: Historical earthquake-resistant timber framing in the mediterranean area
Editor: Springer
Volume:
Vol. 1.
Keywords: Shaking table tests; Timber-masonry walls;
Info
KnowRISK practical guide for mitigation of seismic risk due to non-structural components
Good performance of non-structural elements can be decisive in saving lives and costs when an earthquake strikes. The European project KnowRISK aims to educate and encourage households to take the necessary precautionary measures to protect people, houses, and contents. Preparedness and prevention act on community resilience. Within the KnowRISK project, the idea of a Practical Guide has been conceived suggesting seismic mitigation solutions for non-structural components to non-experts stakeholders. It is intended to guide people into the first steps of prevention in a straightforward manner, minimizing or avoiding injuries, damage, and long-term financial consequences. The novelty of the Guide belongs to his philosophy: a path through increasing challenges corresponds to a growing level of safety. The idea is that anyone can mitigate seismic risk in its own environment by adopting simple and low cost measures. The Practical Guide may contribute to increase risk awareness. This kind of initiatives if undertaken at larger scales may also enhance social resilience.
Year: 2018
Number Pages:
309-321pp.
Author(s): Ferreira, M.A.; Oliveira, C.S.; Lopes, M.; Musacchio, G; Candeias, P.; Vicente, M.; Silva, D. S.; O
: Proceedings of the International Conference on Earthquake Engineering and Structural Dynamics
Editor: Springer Link
Volume:
Volume 47.
Keywords: Practical guide; Community resilience; Preparedness; Non-structural elements
Info
Elastic and inelastic analyses of frames with a force-based higher-order 3D beam element accounting for axial-flexural-sheartorsional interaction
When one of the dimensions of a structural member is not clearly larger than the two orthogonal ones, engineers are usually compelled to simulate it with refined meshes of shell or solid finite elements that typically impose a large computational burden. The alternative use of classical beam theories, either based on Euler-Bernoulli or Timoshenko
Year: 2016
Number Pages:
109-128pp.
Author(s): Correia, A.A.; Almeida, J.P.; Pinho, R.
: Computational Methods in Applied Sciences
Editor: Springer
Volume:
Vol. 3.
Keywords: Inelastic response; Boundary conditions; Flexural-shear-torsional interaction; Higher-order; Force-based; Beam element
Info
A finite-fault modeling of the 1755 Lisbon earthquake sources
A non
Year: 2009
Number Pages:
433-454.
Author(s): Carvalho, A. M.; Campos Costa, A.; Sousa Oliveira, C.
Editor: L.A. Mendes-Victor et al. (eds)
Keywords: Earthquake scenarios; Finite-fault modeling
Info
Simulating earthquake scenarios in the european project Lessloss: the case of Lisbon
N/A
Year: 2009
Number Pages:
233-243.
Author(s): Zonno, G.; Carvalho, A. M.; Franceschina, G.; Akinci, A.; Campos Costa, A.; Coelho, E.; Cultrera, G.; Pacor, F.; Pessina, V.; Cocco, M.
Editor: L.A. Mendes-Victor et al. (eds)
Keywords: Earthquake scenarios
Info
Shaking table testing
This text reflects the first of the four lectures that the author has presented at Udine, Italy, at CISM
Year: 2008
Number Pages:
165-196pp.
Author(s): Bairrão, R.
Editor: Springer Verlag
Keywords: Shaking table testing
|
Tese de Doutoramento
Info
Modelos estocáticos para a caracterização da acção sísmica em Portugal Continental
Um dos principais problemas e interesses da engenharia sísmica é a caracterizaçãoda acção sísmica, envolvendo a estimativa da intensidade, conteúdo em frequência,duração e variabilidade espacial dos movimentos intensos do solo mais gravosos, emtermos dos seus efeitos nas estruturas, que pode ocorrer num local.O presente trabalho de investigação desenvolve e aplica a metodologia estocástica etécnicas de modelação de fonte
Year: 2009
Author(s): Carvalho, A. M.
Keywords: Portugal continental; Risco sísmico; Fonte sísmica; Modelos estocásticos; Acção sísmica
Info
Risco sísmico em Portugal Continental
Os sismos são encarados frequentemente como desastres naturais inevitáveis. Todavia,deveriam ser considerados fenómenos naturais, cujos efeitos adversos podem ser minimizadoscaso se proceda a uma gestão efectiva do risco sísmico.O objectivo principal do presente trabalho de investigação é o de avaliar o risco sísmicoem Portugal Continental.Sendo um tema de natureza multidisciplinar, apresentam-se e discutem-se modelos deavaliação probabilística da perigosidade sísmica e sua desagregação, de vulnerabilidade efragilidade sísmicas de tipologias construtivas, de danos e de perdas económicas e humanas.Aplica-se a análise probabilística da perigosidade sísmica, e sua desagregação, aPortugal Continental, obtendo-se cenários modais capazes de reproduzir os níveis deperigosidade que os condicionam. Apresenta-se o inventário do parque habitacional e seushabitantes, descriminado por factores de vulnerabilidade, e classifica-se a sua vulnerabilidadesegundo os modelos de dano. Procede-se à actualização e aferição de uma metodologia parasimulação de cenários sísmicos, integrada num Sistema de Informação Geográfico. Avalia-seo risco sísmico, seguindo diversas abordagens, comparando-se os resultados com o risco deoutros países.Construiu-se assim uma ferramenta de avaliação de perdas devidas a sismos, queconstitui uma primeira contribuição para o desenvolvimento de um processo de gestão dorisco sísmico aplicado ao Continente Português.
Year: 2009
Author(s): Sousa, M. L.
Info
Avaliação da vulnerabilidade sísmica de edifícios de alvenaria
O parque habitacional de Portugal Continental contém algumas tipologias construtivas deelevada vulnerabilidade sísmica em relação às quais urge actuar no sentido de reduzir o riscosísmico a elas associado. No projecto de investigação
Year: 2008
Author(s): Candeias, P.
Keywords: Reforço sísmico; Vulnerabilidade sísmica; Ensaios sísmicos; Edifícios
|
|
Relatório Científico
Info
LNEC-SPA, signal processing and analysis tools for civil engineers - Version 1.0
N/A
Year: 2007
Number Pages:
78pp.
Author(s): Mendes, L.; Campos Costa, A.
Info
Loss estimations for a reference situation
This report addresses the National Laboratory for Civil Engineering (LNEC) participation in Subproject 10 Earthquake disaster scenario predictions and loss modelling for urban areas. More precisely this report was developed in order to accomplish the 24 months LESSLOSS deliverable nº 85, which achieves loss estimates for the Metropolitan Area of Lisbon (MAL), for pre-defined scenarios earthquake. These loss estimations represent the reference situation to be compared with revised loss estimates after implementing mitigation actions with the ultimate goal of being established, in the next deliverable, the
Year: 2007
Author(s): Campos Costa, A.; Luísa Sousa, M.; Carvalho, A. M.
Keywords: Risk mitigation for earthquakes
Info
Loss estimations for a reference situation - Application to Lisbon Metropolitan Area
N/A
Year: 2007
Number Pages:
54pp.
Author(s): Campos Costa, A.; Sousa, M. L.; Carvalho, A. M.
Info
PROJECT NEFOREEE
N/A
Year: 2007
Number Pages:
189pp.
Author(s): Silva, M. J.; Bairrão, R.
Info
RELATÓRIO DE ACTIVIDADE DO PROJECTO USUET
N/A
Year: 2007
Number Pages:
60pp.
Author(s): Sousa, M. L.; Afonso, N.
Info
Enhancing seismic resistance and durability of natural masonry stone- Construction and 1st phase of the experimental program
The present report describes the construction of a model in limestone masonry for the user Group 3 oh the ECOLEADER Project, led by IRIDEX Construction Group, and the first phase of the experimental program developed in LNEC. The description of the construction, a photographic report and the results obtained on the characteristics tests made on the mortars used in the construction are presented.The construction was carried out by contractor José dos Santos Paixão on the basics of model details and materials specifications proposed by the User group 3, being NESDE/LNEC responsible for the guidance and supervision of the works.
Year: 2006
Author(s): Falcão Silva, M. J.; Candeias, P.; Campos Costa, A.; Bairrão, R.
Keywords: Ecoleader; Limestone masonry
Info
Shaking table tests of a reinforced concrete precast building system.
This report describes the first phase activity of the Portuguese group in the Precast Structures EC8 research projet. The Portuguese group is composed by Laboratório Nacional de Engenharia Civil (LNEC) and the Civibral, S.A. Precast Company.In this phase, seismic test were made in the LNEC
Year: 2006
Author(s): Mendes, L.; Coelho, E.; Campos Costa, A.
Keywords: Reinforced concrete; Shaking table tests
Info
Building stock inventory and vulnerability data for Lisbon Metropolitan Area
The present report addresses the first twelve months of LNEC participation in LESSLOSS
Year: 2005
Author(s): Campos Costa, A.; Luísa Sousa, M.; Coelho, E.
Keywords: Risk mitigation for earthquakes; Vulnerability
Info
Dinámica de bloques de piedra.
The dynamics of rigid bodies was studies by long time, because this phenomenon is important in the seismic security of some types of structures. However, there are few experimental studies. This job shows the experimental test carried out at the Laboratório Nacional de Engenharia Civil (LNEC) of Portugal. Four blue granites stones were tested, each one with different geometrical characteristics, under harmonic and random motions.A numerical simulation was carried out with the Discrete Element Method (DEM). This method has shown to be a good tool in the study of the dynamics of rigid bodies. It was proposed a new methodology to find the parameters of the DEM by using the parameters of classical theory.
Year: 2005
Author(s): Peña, F.; Campos Costa, A.; Lemos, J. V.
Keywords: Discrete Element Method (DEM); Dynamics of rigid bodies
Info
Seismic risk mitigation options and actions to be studied for Lisbon Metropolitan Area
The project LESSLOSS
Year: 2005
Author(s): Luísa Sousa, M.; Coelho, E.; Campos Costa, A.
Keywords: Seismic risk mitigation; Lisbon Metropolitan Area
|
|
|
Outro
Info
Sensibilidade climática, capacidade adaptativa e de vulnerabilidades atuais e futuras da AML
Análise dos registos históricos de eventos climáticos e o seu impacto no setor da energia da AML, para identificar o grau em que este setor foi afetado por estímulos relacionados com o clima. Avaliação de capacidades adaptativas.
Year: 2019
Author(s): Marques da Silva, F.; Pinto, A.; Machado, P.
Keywords: Energia; Alterações climáticas
Info
A propósito da forma na engenharia do vento
Análise da forma das edificações nas ações do vento
Year: 2018
Author(s): Marques da Silva, F.
Keywords: Engenharia do vento; Aerodinãmica
Info
Forma e desenho urbano - efeitos na ventilação
As condicionantes arquitetónicas e de urbanização na ventilação natural
Year: 2018
Author(s): Marques da Silva, F.
Keywords: Engenharia do vento; Ventilação
Info
Wind and structures
Caracterização do vento. Ações sobre estruturas. Ensaios em túnel de vento
Year: 2017
Author(s): Marques da Silva, F.
Keywords: Wind tunnel; Actions on structures; Wind engineering
|