Publicações

Poplar wood is a light, soft, and fast-growing timber from a hardwood species, characteristics that make it suitable for several applications. This study focused on the mechanical characterization of Portuguese poplar species, namely white poplar (Populus Alba) and black poplar (P. nigra), aiming for its structural use. Therefore, a sample of lamellae was assessed to determine its density and dynamic modulus of elasticity, using a non-destructive device, based on longitudinal vibrations. Clear wood specimens were obtained from a set of lamellae to perform tension and compression parallel-to-grain tests. These tests were used to determine the moduli of elasticity in tension and compression and the tensile and compressive strengths and strains. Also, typical stress-strain curves were identified for the sample studied. The results stressed the potential for structural applications of Portuguese poplar.

N/A

Four types of sandwich panels with multilayered designs were produced using wood veneer of Aleppo pine as face and inner sheets, and cork agglomerate as core,intended for use in construction as panelling or partition walls in interior applications. These multilayered sandwich panels were characterized regarding static hardnessand dimensional stability when facing changes in relative humidity and when subjected to a deformation. The panels showed a considerable increase in dimensional stability and shear strength with the increase of the number oflayers. The results suggest that the correct design choice, for example number of inner wood sheets and thickness of cork core layers, allows these sandwich panels to be used as non-structural construction elements such as partition walls.

Changes in flagellate protist communities of subterranean termite Reticulitermes gras-sei across different locations were evaluated following four predictions: (i) Rural endemic (Portugal mainland) termite populations will exhibit high diversity of symbionts; (ii) invasive urban populations (Horta city, Faial island, Azores), on the contrary, will exhibit lower diversity of symbionts, showing high similarity of symbiont assemblages through environmental filtering; (iii) recent historical colonization of isolated regions

This paper describes the use of non-destructive methods to assess the mechanical properties of structural glued laminated timber made from poplar. The longitudinal vibration method and transformed section method were considered. Full-scale tests were also performed to determine the most relevant mechanical properties of 18 beams, namely modulus of elasticity and bending strength. In addition, the bonding performance of each beam was checked by delamination and shear strength tests. Detailed analysis of the results was performed and combined with Levene's and Tukey's tests. The accuracy of the two non-destructive test methods was evaluated by linear regression analysis. The transformed section method showed stronger correlations with modulus of elasticity and shear strength. Slightly lower values were presented by the longitudinal vibration method. A strength class of GL24c can be assigned for glued laminated poplar made with timber with lower properties at the inner lamellas.

Pine (Pinus pinaster Ait.) wood samples were subjected to a combined treatment by densification and heat treatment. Samples were densified before and after heat treatment. The heat treatment was made inside an oven at 190ºC during 2 to 6 h and wood densification was made in a hot press at around 48 bar pressure and temperatures between 160ºC and 200ºC for 30 min. Compression-set, compression-set recovery after three cycles of water soaking followed by oven drying, density, hardness, bending strength and stiffness and durability against subterranean termites were determined after the treatment. Results show that densification increases density, hardness, bending strength, stiffness and durability against termites. Heat treatment applied after the densification is more effective in reducing compression-set recovery than if applied before.

The ability of subterranean termites to digest lignocellulose relies not onlyon their digestive tract physiology, but also on the symbiotic relationshipsestablished with flagellate protists and bacteria. The objective of this workwas to test the possible effect of different cellulose-based diets on the communitystructure (species richness and other diversity metrics) of the flagellateprotists of the subterranean termite Reticulitermes grassei. Termitesbelonging to the same colony were subjected to six different diets (naturaldiet, maritime pine wood, European beech, thermally modified Europeanbeech, cellulose powder and starvation), and their flagellate protist communitywas evaluated after the trials.All non-treated sound woods produced similar flagellate protist communitiesthat were more diverse and of high evenness (low dominance).On the contrary, flagellate protist communities from cellulose-fed termitesand starving termites were considered to be significantly different from allnon-treated woods; they were less diverse and some morphotypes becamedominant as a consequence of flagellate protist communities having sufferedmajor adaptations to these diets. The flagellate protist communitiesof untreated beech and thermally modified beech-fed termites were consideredto be significantly different in terms of abundance and morphotypediversity. This may be caused by a decrease in lignocellulose qualityavailable for termites and from an interference of thermally treated woodwith the chemical stability of the termite hindgut.Our study suggests that as a consequence of the strong division oflabour among these protists to accomplish the intricate process of lignocellulosedigestion, termite symbiotic flagellate protist communities are adynamic assemblage able to adapt to different conditions and diets. Thisstudy is important for the community-level alteration approach, and it isthe first study to investigate the effects of thermally modified wood on theflagellate protist communities of subterranean termites.

Serviceability limit states (related to deformation) rather than ultimate limit states (related to collapse)are often the reason for the need to assess existing timber structures. Prediction of timber members

Monitoring and evaluation of glued laminated timber structures in service is essential to warrant its integrity, where non-destructive techniques play an important role. This paper describes the results obtained on glued laminated timber beams of maritime pine, with and without preservative treatment, and of spruce, exposed to naturaloutdoor environment as well as to artificial weathering. The assessment of glue lines

This paper presents work carried out with the aim of characterizing the mechanical behavior and developing visual and machine strength grading systems for Portuguese maritime pine roundwood for structural applications. Two samples of forty maritime pine logs each were collected, one in a northern region of Portugal and another in an interior central region. After drying, the logs were visually graded andsubjected to nondestructive tests, using vibration and ultrasounds, for determination of dynamic modulus of elasticity. The logs were then subjected to destructive tests for determining bending and compression strength and bending modulus of elasticity. These results were analyzed in order to identify the features to be considered in the strength grading process. From this analysis, a proposal was developed tovisually grade Portuguese maritime pine roundwood in two strength grades. According to the European strength class standard for solid timber, the upper grade has similar mechanical properties to the C50 class, whereas the lower grade is similar to the C35. The machine grading showed good potential as a result of the good correlation presented between the dynamic modulus of elasticity and the mechanical properties. However, the ultrasounds showed slightly better correlation than the vibration method, whereas the last one is more practical.

COST Action FP 1303

The aim of the present work was to conduct a Life Cycle Assessment study ofthermally-modified Atlanticwood® pine boards based on real data provided by theSantos & Santos Madeiras company. Atlanticwood® pine boards have severalapplications, but are mainly used for exterior decking and the cladding facades ofbuildings. The LCA study was conducted based on the ISO 14040/44 standard and PCR

Bridge falsework systems are one of the most common temporary structures used in theconstruction industry, namely to support the formwork during the construction of concrete bridges. Inthis paper the results of numerical studies of a selected structural system are presented using a noveljoint finite element and information gathered from experimental tests. In the present paper, differenthazard scenarios associated with bridge falsework systems will be analysed, such as: (i) bracingconfigurations; (ii) joint characteristics; (iii) falsework using steel beam girders. For each consideredhazard scenario, the resistance is calculated and analysed. From the results, relevant practicalinformation could be obtained which can be used to reduce the risk associated with the design andoperation of bridge falsework systems.

Bridge falsework systems are one of the most common temporary structures used during the construction of concrete bridges. In this paper the results obtained from numerical studies of a selected structural system made of steel are presented. In particular, risks associated with bridge falsework systems will be analysed for the most relevant external hazards: (i) concrete casting loads; (ii) wind loads; (iii) ground settlements. For each considered hazard scenario, the resistance of the system is calculated and analysed based on deterministic analyses. From the results, relevant practical information is obtained which can reduce the risk associated with the design and operation of bridge falsework systems.

Na assessment procedure for bending performance of timber beams on-site by combining informationfrom diferente non or semi-destructive methods is presented and discussed. Different methods were applied (core drilling, pilodyn, ultrasounds and stress waves) to old timber beams removed from a building given the fact after visual inspection it was decided that they will no longer able to comply to the limit state requirements. The study comprised the visual grading of the beams and afterwards a proof-load test was applied to them for obtaining the modulus of elasticity. The information obtained from the different tests are combined using meta-analysis and probabilistic methods and the results obtained solely from visual grading or by the application of a proposed coherent procedure (combining all data) compared. The results showed that SDT/NDT methods can be useful for the confirmation of visual strength grading results. Thus a more reliable structural analysis can be performed and a more informed decision yaken about the serviceability state of the structure.

Pine (Pinus pinaster) wood samples were subjected to a combined densification andheat treatment process. Samples were densified before and after heat treatment. The heattreatment was carried out inside an oven at 190ºC for 2 to 6 h and wood densificationwas performed in a hot press at around 48 bar pressure and at temperatures of between160ºC and 200ºC for 30 min. Compression rate and density were determined after thetreatment. Set recovery was determined by thee cycles of water soaking followed byoven drying. The best results were attained when densification was done before heattreatment. The set recovery was less than 30% for the first two cycles and a little higherin the third cycle. For wood treated for 6 hours, the set recovery was less than 15%.Heat treatment before densification seems to be less effective than after densification to enable set-recovery.

Timber is highly interesting from the point of view of sustainable construction and, besides most traditional uses it has received increasing attention in modern building industry. However, both the timber material and timber structures require particular attention, care and adequate strategies concern in materials specification, design, detailing, maintenance and repair for extended life.Specific to timber as a raw material are its great variability, anisotropy, hygroscopic nature and the risk of biological degradation in adverse exposure conditions. Highly important or the performance and safety of timber structures are also the detailing of timber joints, dimensional variations and tensile stresses perpendicular to the wood grain, that often converge to cause malfunctions.

Embora a maioria das aplicações estruturais dos compósitos de madeira-plástico (CMP) serestrinja aos pavimentos residenciais, mobiliário urbano e a vedações, têm sidodesenvolvidos produtos de CMP para aplicações estruturais mais exigentes, tais como subestruturas residenciais, pavimentos industriais, elementos de fundação, pontes pedonais e estruturas para docas.Os produtos de CMP exibem uma ampla gama de propriedades e características dedesempenho de acordo com a sua formulação, forma geométrica, tipo, teor e tratamentodas fibras e, características da interface matriz-fibras.Podendo o desempenho dos produtos de CMP variar em função de um grande número defatores, as suas propriedades, características de desempenho e a sua durabilidade devem ser avaliados para cada produto comercial.Neste artigo, são apresentados os métodos de avaliação de aptidão ao uso de kits de CMPusados para revestimento de piso em terraços na zona envolvente de edifícios, bem comoas características obtidas com dois destes produtos, concluindo-se da adequabilidade dosmesmos para as aplicações em vista.

Alterações de uso, a ocorrência de deterioração ou o colapso parcial são situações que requerem a necessidade de avaliar a segurança ou funcionalidade de uma estrutura de madeira. No entanto, esta avaliação encontra as dificuldades associadas às características dos elementos estruturais de madeira (comportamento anisotrópico, elevada variabilidadedas propriedades físico-mecânicas e higroscopicidade com efeito pronunciado naspropriedades físico-mecânicas) e do efeito do nível de conservação (deterioração) naredução das propriedades mecânicas. Estas dificuldades são reconhecidas internacionalmente e têm vindo a ser debatidas no âmbito de diversas comissões científicas e técnicas nos últimos 5 anos. A presente comunicação pretende dar a conhecer a atividade desenvolvida por estas comissões e enumerar algumas das novas metodologias deavaliação de estruturas de madeira.

Fires on the Wildland Urban Interface (WUI) have caused significant loss of life and colossal property andnatural environment damages in numerous countries around the world. The solutions to mitigate this fireproblem are complex, as it results from the fuel source changes from vegetation to structural materials in a fireprone environment and it involves the interaction of several factors that act synergistically to increase thefrequency of fires with severe potential destruction. In order to understand how and why buildings are damaged and destroyed under wildland fire attack, several surveys following historical large scale fire events, which resulted in significant building damages and/or losses, have been conducted worldwide. This paper aims to review and analyse the main characteristics of buildings and other structures that contributed to their vulnerability during fires at the WUI, based on the analysis of several post fire studies developed in Australia, United States of America and Mediterranean Europe (particularly Portugal, Spain, Greece). The different building traditions between the selected countries are discussed, as long as they affect building vulnerability to fires.

N/A

N/A

N/A

N/A

O Museu da Academia das Ciências de Lisboa possui uma preciosa xiloteca assinada pelo Mestre dos marceneiros portugueses, José Aniceto Rapozo contendo 1213 amostras de madeiras do Brasil e 12 de outras origens. A sua importância no progresso do conhecimento dos recursos florestais do Brasil naviragem dos séculos dezoito e dezanove conduziu ao estudo em curso. Dada a devastação verificada em vastas áreas florestais brasileiras, surgem dificuldades por certas espécies poderem ter distribuiçãogeográfica diferente (com eventual extinção, geral ou localizada), por insuficiência do material de comparação, e por ambiguidade das designações comerciais.Foi possível identificar esta xiloteca como uma de quatro encomendadas a Aniceto Rapozo pelo Príncipe Regente. A análise das amostras de madeira e a informação documental mostram que a colecçãotem por base uma remessa de 5008 amostras de madeiras do Brasil enviada em 1784 para o Arsenal Real do Exército, em Lisboa, pelo Vice-Rei do Brasil, Luís de Vasconcellos e Souza.O valor científico do conjunto é evidenciado pela identificação botânica das espéciesrepresentadas. Na situação actual, a identificação das espécies florestais representadas na amostragem foiinteiramente conseguida em 14% dos casos, conseguida mas ainda por confirmar em 27%. Dado o carácter preliminar deste estudo, os seus resultados serão ulteriormente publicados com mais pormenor. Among the Lisbon Academy of Sciences Museum collection there is a valuable xylarium by theleading Portuguese master cabinet-maker José Aniceto Rapozo (1756-1824), comprising 1213 wood samples from Brazil plus 12 from elsewhere. This collection is most important since it allows us to improve the knowledge on Brazilian forest resources by the end of the eighteenth century and thebeginning of the next. This study aims to establish its historical framework and scientific value. Owing tooverexploitation and even devastation of very large forest areas in Brazil, difficulties for our study aroseeither as some species may have now a different geographical distribution (and eventually may have underwent local or general extinction), by lack of adequate comparison material, or because of ambiguityof the commercial names.Results so far obtained allowed us to recognize the xylarium as one of the four commanded Rapozo by the Regent Prince, later King João VI (1767-1826). Taking into account the wood samples analyses as well as bibliographic data it is possible to conclude that the collection was prepared from a set 3 of 5008 Brazilian wood samples sent to the Royal Arsenal in Lisbon in 1784 by the Brazil

This work collects information about laboratory tests to evaluate the properties of agro-industrial wastes used for thermal insulation building materials considering them individually and in composits. It focuses on bio-susceptibility, as one of the main aspects to consider for bio-based building products.

Innovation in structures and construction materials demands a more accurate performance analysis during the life cycle. In addition, climatic changes pose new challenges to civil infrastructures that were not so relevant in the past. In most cases, the traditional test methods cannot accurately assess the complex phenomena involved in durability. The modern and complex factors require a different approach to durability analysis. The purpose of this chapter is to present innovative durability tests on construction materials: wood; rammed earth, cob and unfired blocks; natural stone; bituminous binders and mixtures; and Fibre Reinforced Polymers (FRP) to concrete bonded connections. Most of these tests concern the accelerated simulation of the main phenomena involved in durability performance

Laboratory tests were carried out to define production parameters of innovative eco-efficient composites made up of hazelnut shells as aggregate and a sodium silicate solution as adhesive. The aim was to maximize the content of bio-aggregates and minimize the amount of adhesive, guaranteeing the feasibility of producing samples. Therefore, after preliminary testing, the percentages of hazelnut shells and the sodium silicate solution were kept constant: 70% and 30% of the total volume, respectively. However, the characteristics of the considered composites did not allow the production of uniform samples. The sodium silicate solution was not rapidly absorbed by the bio-aggregates; during the drying process, it was deposited on the bottom side of the samples. The uniformity of the samples is required to guarantee a correct evaluation of their performance and future homogeneous panels. Hence, different production parameters were investigated, such as drying at T

The durability of construction materials is a key concern and can be related to different actions such as weathering conditions outdoors enhanced by climatic change, chemical and biological attack, abrasion, and other conditions of service over time. Frequently, several actions develop simultaneously, making it difficult to reproduce in situ conditions in laboratory. Furthermore, testing to assess durability depends largely on the nature of the material itself or on the way it has been assembled with other materials. The ageing techniques to assess long-term durability performance of construction materials are based on accelerated durability tests, which include, for example, thermal stress, freeze

This paper presents an overview of research carried out to assess the bonding suitability of Portuguese timbers.Most work developed in the last decades has focused Maritime pine timber, due to its traditional use in building construction, good mechanical properties and availability. Untreated, as well as preservative treated Maritime pine have been studied, as its impregnability allows deep treatment suitable for applications in Use Classes 3 and 4.Recent results on bonding preservative treated Maritime pine wood are discussed.Preliminary results regarding other species that are becoming available in the Portuguese market are also presented, as an attempt to reduce pressure on Maritime pine timber as well as to seek more valuable alternatives for their traditional uses.

No presente trabalho apresentam-se os resultados mais relevantes obtidos num programa experimental desenvolvido no LNEC com o objetivo de caracterizar a aderência dos varões nervurados do tipo A500NR SD existentes no mercado, fundamentalmente para melhorar a modelação do comportamento dos elementos de betão armado de zonas críticas de estruturas inseridas em zonas sísmicas.O programa experimental desenvolvido pretende simular as condições de aderência existentes num varão horizontal de uma ligação viga-pilar e tem como principais variáveis varões de dois diâmetros frequentemente utilizados (16 e 25 mm), dois níveis diferentes de área relativa das nervuras (A e B) e duas classes de betão (C1 e C2), ambos representativos do betão utilizado nas construções mais relevantes.Os resultados obtidos quer nos ensaios monotónicos quer nos ensaios cíclicos apontam para um decréscimo da tensão de aderência com o aumento do diâmetro da ordem dos 10%. O aumento da área relativa das nervuras transversais traduz-se num incremento da tensão máxima de aderência da ordem dos 15%, com uma redução do deslizamento que ronda os 15%. Nesse sentido, este estudo propôs que, no caso dos varões com maior área relativa das nervuras, a tensão de aderência máxima possa variar entre 2,35 e 2,65 vezes a raiz quadrada da resistência do betão à compressão e que o patamar onde a tensão de aderência é máxima se situe entre 0,5 e 1,5 mm de deslizamento.Explorou-se também o fenómeno da entrada em cedência da armadura tendo-se concluído que, em provetes que pretendem simular as condições de aderência existentes num varão horizontal de uma ligação viga-pilar, a entrada em cedência da armadura conduz a uma redução da tensão de aderência máxima inferior a 10%, quer regime monotónico quer em regime cíclico.

O presente trabalho de investigação refere-se à conservação de elementos estruturais de madeira medianamente degradados por fungos em edifícios antigos. Propõe-se estudar a compatibilidade entre produtos de tratamento e de consolidação por impregnação, aplicados sequencialmente. A avaliação do processo foi realizada maioritariamente em laboratório e na óptica do desempenho mecânico conjunto da madeira e produtos aplicados, por intermédio de ensaios físico-mecânicos destrutivos e não destrutivos e também por ensaios mecânicos não destrutivos realizados in situ. Foram utilizados produtos comerciais, aplicando-os às espécies de madeira correntemente encontradas nos edifícios antigos da zona de Lisboa: Pinho bravo e Casquinha. Procedeu-se à avaliação mecânica de madeira nova e antiga, em estado são e degradado; ao desenvolvimento de um método de medição da profundidade de penetração de produtos de tratamento; à avaliação da capacidade consolidante de madeira degradada por produtos poliméricos fluidos e à avaliação da sua actuação conjunta, estudada com e sem envelhecimento artificial. Os resultados obtidos indicaram significativos aumentos de capacidade mecânica da madeira degradada, quando submetida a tratamento e consolidação Este trabalho desenvolve, assim, uma proposta de solução para a madeira que não se encontra sã, mas que ainda possui capacidade resistente, não necessitando, por isso, de ser removida. O processo de tratamento e consolidação promove resistência aos agentes biológicos e, simultaneamente, recuperação de alguma resistência mecânica da madeira, conferindo-lhe capacidade para continuar em serviço.

Subterranean termites from the genus Reticulitermes are an important pest ofwood in service throughout southern Europe and elsewhere. For effective termitecontrol with long term protection but minimal environmental damage, newintegrated approaches to termite management are needed. Baiting-based systemsseem to be promising non-traditional methods for termite control, targeting thecolony as a whole. However, control through baiting is only feasible when it isknown that the toxicant can be transferred to all the colonies foraging on theinfested area and also throughout each individual colony. Accordingly, the workdescribed is specifically designed to achieve a better understanding of thedistribution and delimitation of colonies within a population of Reticulitermes,with parallel insights into foraging behaviour and colony organization.Initially, the species/subspecies spectrum present within the notionalReticulitermes group in Portugal was reassessed. It was shown that Reticulitermesgrassei is the only species encountered. Foraging activity was then assessed in anexperimental woodland site over two successive annual cycles, both by thesampling of natural lying dead wood and by a standard baiting grid. R. grasseiseem to select wood with larger diameter, with an apparent preference for materialalready decayed by fungi. Both termite and fungal attack on wood seems to bepromoted by higher moisture levels, such as prevail in larger litter items andduring seasonal rains. Termites were unable to detect and direct their foragingtowards sound wood in laboratory conditions, suggesting that the network ofinfochemical signals is more complex than just volatiles emanating from soundwood. Mark-release-recapture (MRR) was used to delineate foraging groups,which were then allocated to their parent colonies by the use of microsatellitemarkers. The results suggest that resource sharing is a facultative behaviour,specifically when food is not a limiting factor for colony development. Theimplications of all these findings for bait technology and protocols are discussed,with reference to the local population ecology of Reticulitermes.

O presente trabalho apresenta um projecto de Norma Portuguesa relativo ao ensaio de dureza Vickers (HV0,2 a HV5 exclusive) de materiais metálicos, e insere-se numa série de estudos programados pelo autor, enquanto coordenador da normalização nacional no domínio dos ensaios mecânicos, físicos e não-destrutivos de materiais metálicos, a fim de actualizar as Normas Portuguesas existentes neste domínio.O texto apresentado consiste na versão final de uma proposta redigida pelo autor, na sequência dos estudos efectuados ao nível da Comissão Técnica de Normalização competente.

O presente trabalho apresenta um projecto de versão portuguesa da Norma Europeia EN 10002-1, e insere-se numa série de estudos programados pelo autor, enquanto coordenador da normalização nacional no domínio dos ensaios mecânicos, físicos e não-destrutivos de materiais metálicos, a fim de actualizar as Normas Portuguesas existentes neste domínio.O texto do projecto de revisão apresentado consiste na versão final de uma proposta redigida pelo autor, na sequência dos estudos efectuados ao nível da Comissão Técnica de Normalização competente.

O presente trabalho consiste no relatório de uma missão a Paris do signatário, na sua qualidade de coordenador da Normalização Nacional no domínio dos "Ensaios mecânicos, físicos e não-destrutivos de materiais metálicos", a fim de representar Portugal numa reunião do ECISS/TC 1a "Ensaios mecânicos e físicos de aços", encarregado dos trabalhos de Normalização Europeia neste domínio.

O presente trabalho pretende mostrar as possibilidades fornecidas pela utilização de um método de simulação no estudo da homogeneidade da fiabilidade, oferecida pelas curvas de encurvadura de colunas, de diferentes regulamentos de estruturas de aço.Através de um modelo geometricamente não linear, de que se faz uma breve apresentação e se descrevem alguns exemplos de aplicação, é feito o estudo da carga crítica de encurvadura de um perfil IPE 120, segundo o eixo de maior inércia. Os resultados apresentados referem-se a cerca de 1000 colunas diferentes, obtidas através de um método de simulação do tipo Monte-Carlo, para as quais se efectua a comparação entre os valores da carga crítica obtidos e os fornecidos por vários regulamentos, bem como a análise da homogeneidade da fiabilidade conferida pelos mesmos regulamentos em função das respectivas esbeltezas.

O presente trabalho apresenta um projecto de Norma Portuguesa com o título

O presente trabalho apresenta um projecto de Norma Portuguesa com o título

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A