Publicações

Given the 516 Arouca pedestrian suspension bridge

The characteristic values of temperature corresponding to the maximum and minimum shade air temperature with an annual probability of being exceeded 0.02, used in the European construction standard for thermal actions (EN 1991-1-5:2003), are usually assessed at a country level and included in the National Annexes to that Eurocode part.The paper aims to support national authorities on elaborating maps for thermal actions using publicly available datasets, consistent at a European level, and harmonised modelling approaches. In addition, these datasets are continuously updated, reflecting the current climate and capturing potential global warming variations.The work investigates how updates in data and modelling could affect the characteristic values currentlyadopted in the Italian National Annexes to the Eurocodes. The main results show that: (i) the currently adoptednumber and locations of the weather stations result fairly representative of the patterns detected by exploitingadditional datasets; ii) the statistical method plays an essential role in the assessment of characteristic values, i.e., the method adopted in the current Italian standard evaluates more conservative characteristic values of maximum temperature than Gumbel or Generalized Extreme Value distributions, but could err on the unsafe side for minimum ones; (iii) both E-OBS and ERA5-Land datasets represent two optimal products to be used as a common source of temperature values at European scale; (iv) moving towards an updated period for temperature data results on an increase of characteristic values of maximum temperature and limited variations in spatial extent and magnitude of characteristic values of minimum ones.

The present work analyses the wind load effects on the 516 Arouca bridge, the world's longest pedestrian suspension bridge in 2020. Computational fluid dynamics (CFD) was used to model a range of wind incidence angles between -8

The safety and resilience of school buildings against natural disasters is of paramount importance since schools represent a reference point for communities. Such significance is not only related to the direct consequences of collapse on a vulnerable part of the population, but also due to the importance of schools in the post-disaster recovery. This work is focused on the risk and resilience assessment of school buildings in Lisbon (Portugal) under seismic events. The results of this study, in which a subset of 32 schools are analyzed, are used to define a prioritization strategy to mitigate the seismic risk of the Lisbon City Council school building portfolio and to assess the overall resilience of the school network. Numerical modeling of the school buildings is performed in order to estimate losses in terms of the built-up area of the schools and recovery times associated with different seismic scenarios, which are probabilistically defined specifically for the sites of the buildings, accounting for the local soil conditions and associated amplification effects. Based on the obtained risk estimates, which are compared to reference values established on international guidelines and specialized literature, the Lisbon City Council and LNEC jointly defined a short- and medium-term risk mitigation plan, starting with a detailed inspection and assessment of the most vulnerable school buildings and continuing to the implementation of retrofitting measures.

Procuram-se sintetizar neste artigo os principais aspetos relacionados com a avaliação e a reabilitação sísmica de edifícios existentes de alvenaria, compatibilizando a NP EN 1998-3:2017 com os respetivosAnexo C, específico para edifícios de alvenaria, e Anexo Nacional, específico para Portugal.A avaliação sísmica é um procedimento quantitativo através do qual se verifica se um edifício existente, danificado ou não, satisfaz os requisitos de desempenho, definidos por uma combinação de um estado limite com um nível de ação sísmica, através de critérios de conformidade. Neste procedimento estão envolvidos a definição da ação sísmica, a modelação da estrutura, os métodos de análise para determinação dos efeitos das ações e as verificações de segurança. São abordados os métodos de análise, dois lineares e dois nãolineares, aplicáveis a edifícios existentes de alvenaria, bem como as recomendações específicas do Anexo C e as informações complementares do Anexo Nacional.

The response of three full-scale unreinforced masonry buildings, without specific seismic detailing, as observed in shake table testing at LNEC for a seismic action representative of induced seismicity, is presented. The first building specimen simulated the upper floor and roof of the end-unit of a two-storey terraced house, built with unreinforced cavity walls, a reinforced concrete slab and a pitched timber roof. The second specimen was a replica of the roof of the first building. The third specimen represented instead a one-story detached pre-1940

A avaliação da segurança sísmica de edifícios existentes de alvenaria tem como referência os procedimentos dispostos na NP EN 1998-3:2017 (Anexo C) e o respetivo Anexo Nacional, que estabelecem os requisitos de desempenho e os critérios de conformidade para edifícios existentes sujeitos a um determinado nível de ação sísmica. No seguimento das exigências regulamentares, e à luz da verificação da segurança à ação sísmica preconizada na norma, realizaram-se análises probabilísticas de vulnerabilidade sísmica e fiabilidade estrutural a um grande conjunto de edifícios de alvenaria representativos do parque habitacional, que conduziram ao desenvolvimento de métodos expeditos para a avaliação sísmica em alternativa à verificação pelo método de referência. Os métodos propostos permitem avaliar a resistência sísmica de edifícios de alvenaria com pavimentos rígidos, sem recurso a análises numéricas e recorrendo apenas a parâmetros geométricos (Método I) ou em conjunto com as propriedades mecânicas dos materiais (Método II).

The analysis and control of deformability of wall coating mortars contributes to minimize crack development and propagation, one of the most common anomalies in building facades. Many of these cracks appear due to internal stresses in the coating mortar, because of imposed deformations or of imposed restrictions by the substrate. These deformability studies should include one or more experimental methods to determine the modulus of elasticity (E) of the coating mortars in question. There are two approaches to experimentally determine E for mortar specimens: static and dynamic experimental methodologies. For civil engineering applications, the results obtained from static methodologies are more adequate than those obtained with dynamic methodologies. However, since static E results are scarce due to a lack of an established static methodology for mortars, mainly due to their lower mechanical resistance, friable behaviour and higher frailty when compared to concrete, engineers are led to use the established dynamic methodologies. This paper proposes an experimental methodology to determine the static E for moulded mortars specimens. The methodology was adapted from the standard procedure used for concrete specimens, to accommodate the specific characteristics of mortar specimens, namely: provide reliable displacement and applied load data; solve issue related to specific mechanical characteristics of mortar specimens, such as low strength and friable behaviour. This methodology was applied to standard moulded mortar specimens made from multiple mineral binders (cement, hydraulic lime and air lime). In order to validate it, the obtained results were compared with two, well-established, dynamic experimental methodologies (Resonance Frequency and Ultrasonic methodologies) as well as with reference values from relevant bibliography. Using the previous data, this paper also includes a preliminary analysis on the ratios between static and dynamic E values for the studied mortars, representing another objective of this study.

This paper addresses the planar measurement problem in the destructive mechanical testing of masonry specimens, describing the proposed optical measurement solution. The adopted affine geometrical camera model is described as well as its experimental implementation using a digital camera and a measurement referential traceable to the International System of Units (SI). Experimental results from non-destructive tests are presented and discussed, including measurements obtained from the use of classical contact instrumentation. Measurement estimates and uncertainties related to the quantified mechanical properties are also shown.

As construções antigas fazem parte do tecido histórico das cidades, pelo que é importante proceder a intervenções de reabilitação eficientes, mas não destruidoras da sua identidade e valor cultural intrínseco. A utilização de rebocos armados apresenta-se como uma solução simples e eficaz no reforço sísmico deste tipo de construções, nos casos em que não é possível ou exigível a preservação dos revestimentos de paredes. Neste artigo, são analisadas várias composições de rebocos armados, constituídos por ligantes à base de cal aérea, cal hidráulica ou cimento, com um traço usual e com armaduras constituídas por redes metálicas, redes de fibra de vidro e uma rede de fibra natural. É analisada a capacidade resistente à tração dessesrevestimentos armados, assim como aspetos que podem influenciar a compatibilidade com os materiais existentes, apresentando-se as principais vantagens e desvantagens dos vários tipos de revestimentos.

Apresenta-se uma abordagem para a avaliação de vulnerabilidade de estruturas com base em resultados experimentais obtidos em ensaios sísmicos, num contexto de análise de fragilidade para avaliação do risco sísmico. É proposta uma metodologia para obtenção da vulnerabilidade experimental de modelos ensaiados para níveis crescentes de excitação, e estimar a fragilidade com base em ensaios sísmicos.

Nesta comunicação apresenta-se um estudo de caracterização dinâmica da Ponte Miguel Torga com base em ensaios dinâmicos in-situ. Estes ensaios foram efetuados antes da abertura da ponte ao tráfego tendo consistido na medição das vibrações induzidas pelo tráfego de camiões carregados. Descrevem-se as técnicas de análise dos registos de aceleração, apresentando-se as características dinâmicas da ponte identificadas a partir dessa análise.

Desde a publicação em 1993 do regulamento português (RSA), onde são definidas as zonas sísmicas para o território e a respetiva ação, têm sido efetuados diversos estudos sobre casualidade e movimentos sísmicos intensos. É objetivo desta comunicação apresentar estudos recentes nesta matéria e os problemas encontrados com a aplicação do Eurocódigo 8 (EC-8), parte 1-1, para se dar inicio a uma oportuna revisão da regulamentação em vigor.

Apresenta-se a proposta para o Documento nacional de Aplicação (DNA) elaborado de acordo com o disposto na Pré-Norma Europeia ENV 1998-1-1:1994, Eurocódigo 8

Às 05h19m TUC do dia 9 de Julho de 1998 as ilhas do Grupo Central do Arquipélago dos Açores foram sacudidas por um forte sismo de magnitude md

The knowledge of the actual dynamic properties (natural frequencies, mode shapes and damping ratios) of bridge structures is extremely important to study the behavior of those structures in relation to seismic, wind or even traffic loads. Furthermore, the experimentally determined dynamic properties of a structure are an effective way to characterize its actual global behavior since they depend on its stiffness and mass distribution. The experimental modal analysis of bridges can be performed from the results of ambient vibration tests carried out on those civil engineering structures, with some advantages in relation to other types of in-situ dynamic tests. Ambient vibration tests have been recently conducted on two main bridges of the Portuguese roads network, a concrete arch bridge and a cable-stayed bridge. The tests carried out on the two bridges, the analysis techniques and the main results that were obtained are presented in this paper.

This paper reports an experimental study aiming at the analysis of the behavior under horizontal actions of reinforced concrete frames infilled with different brick masonry walls, conducted at the Centre for studies and Equipment in Earthquake Engineering (C3ES) of the national Laboratory for Civil Engineering of Portugal (LNEC).Nine models, in a scale 2:3, were tested, named: two bare frames, four fully infilled frames and three infilled frames with a window opening. Two different horizontal histories of displacements under identical velocities were imposed at the level of the beam centerline: cyclic (six models) and monotonic (three models). Constant vertical forces were applied at the top of the columns in order to reproduce the effect of the upper floors of a building. The characteristics of the models, the test set-up and instrumentation and the testing procedure are reported. Some results of this experimental study are also presented and analysed.

This paper reports part of an experimental work conducted at LNEC/C3ES (Centre for Studies and Equipments in Earthquake Engineering) aiming at analyzing the behavior of R/C bare and infilled frames subjected to horizontal loads and the effectiveness of different repair procedures. Three models in a 2:3 scale were tested. One of these models was only a bare R/C frame and the other two were R/C frames fully infilled with brick masonry. In a first phase the models were tested under horizontal cyclic actions that caused severe damage in the infill walls and also some damage in the R/C frames. In a second phase the models were repaired and subjected again to horizontal cyclic actions. Different repair techniques were used for the two infilled models. The assessment of the models behavior, before and after repair, is presented in terms of strength, stiffness degradation, energy dissipation and failure mechanisms.

The object of this paper is to improve the probabilistic methodology to evaluate seismic losses in a given area, considering the randomness of the buildings vulnerability. Probabilistic methods for the evaluation of seismic losses are used taking into account both (i) the seismic hazard in the area and (ii) the seismic vulnerability of the existing stock of buildings. The distribution of losses is obtained convolving the probability distribution of seismic hazard (Beta distribution) with the conditional probability distribution of vulnerability, given a macroseismic intensity (Lognormal distribution), for a known stock of buildings. The above-described methodology is applied to the Portuguese continental country. The number of housing units per county as a function of the epoch of construction, available from the Portuguese Census 91 is the data base for the application of the model.

This paper presents an experimental study on the behaviour of reinforced concrete infilled frames, carried out at the shaking table of the Centre for Earthquake Studies of LNEC, in Lisbon, within the 2nd phase of the European Programme ECOEST II, by request of the University of Patras. Five three-dimensional structures were tested, at real scale, with one storey and one bay in each of the two orthogonal directions of the horizontal plan. A biaxial seismic excitation was considered based on the adaptation of the records of two orthogonal horizontal components of the Patras 1993 earthquake, taking into account the inertial characteristics of the shaking table. The tests carried out are summarised, describing the test set-up and instrumentation, as well as the methodology used. The experimental results obtained are outlined and analysed.

This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe

The applications of discrete elements models based on rigid block formulations to the analysis of masonry walls under horizontal out-of-plane loading is simplified block pattern are addressed. Two procedures for creating irregular block systems are presented, one using Voronoi polygons, the other based on a bed and cross joint structure with random deviations. A test problem provides a comparison of various regular and random block patterns, showing their influence on the failure loads. The estimation of manual frequencies of rigid block models, and its application to static pushover analyses, is addressed. An example of application of rigid block model to wall capacity problem is presented.

The overall aim of Sub-Project 10 (Earthquake disaster scenario predictions and loss modelling for urban areas) has been to create a tool, based on state-of-the-art loss modelling software, to provide strong, quantified statements about the benefits of a range of possible mitigation actions, in order to support decision-making by urban authorities for seismic risk mitigation strategies. A further larger aim has been to contribute to a seismic risk mitigation policy for future implementation at European level. Among the European cities for which loss estimation studies have been carried out are Istanbul, Lisbon and Thessaloniki, and tools, using GIS mapping, have been developed by research teams in each of these cities; these were made available for further development to examine mitigation strategies within SP10. Related research studies

Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. One European result is EN 1998, which will be in several years the main seismic code for all European countries. But it is well known, that older existing structures cause in many large earthquakes much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical - structures and lifeline structures must have priority. In September 2004 the European Integrated Research Project LESSLOSS on Risk Mitigation for Earthquakes and Landslides was started. The project will run for three years and comprises 13 Sub-Projects (SP´s). The consortium consists of 46 partners (see http:\\www.lessloss.org). LESSLOSS SP5 is on In-situ Assessment, Monitoring and Typification of buildings and Infrastructure. The project partners of SP5 are ARS, CESI, LNEC, RWTH and VCE. This Sub Project focuses mainly on the assessment of important existing structures and tries to integrate experimental methods into the assessment procedure. The progress of SP5 obtained in the first year is summarized in this paper. Highlights presented by all partners are mentioned and the assessment of Hospital Innsbruck is presented in more detail. The most innovative task of LESSLOSS/ SP5 is Update of vulnerability estimates via monitoring, which was also started in the first year.

In order to study the behavior of bridge structures in relation to traffic, wind and seismic loads, it is extremely important to know their actual dynamic properties (natural frequencies, vibration mode shapes and damping). The experimentally identified dynamic properties of bridge structures are also an effective way to characterize their actual global structural behavior. Whether included in the reception load tests of recently built bridges, before they are opened to the traffic, or as part of the inspection works of bridges already in service, LNEC has performed modal analysis studies based on the results of ambient vibration tests. Some of the studies carried out recently in important bridges are reported in this paper.

O sismo de Northridge ocorreu na parte norte da área metropolitana de Los Angeles, Califórnia, às 4:31 h do dia 17 de janeiro, uma segunda-feira coincidente com dia de feriado nacional, tendo atingindo uma magnitude de 6.6 na escala de Richter. O número total de vítimas mortais cifra-se em 57, havendo para cima de 8 000 feridos e 20 000 desalojados.As estimativas de perdas totais, feitas em meados de fevereiro de 1994, apontavam para valores de 15 biliões de US dólares, tendo o Estado da Califórnia apresentado um impacto económico total de ordem dos 30 biliões de dólares, perto do valor do Orçamento Geral do estado Português para 1994. Os prejuízos infligidos na indústria e no comércio são também surpreendentemente elevados, exigindo longos períodos de interrupção das atividades económicas.

Communicating science within disaster risk reduction using methods that encourage two-way dialogue between scientists and laypersons is a challenging task. This paper aims at presenting a methodological strategy of communicating risk and non-structural seismic protection measures through participatory approach. Such methodological strategy is part of a pilot experience of risk communication in two schools in Lisbon (Portugal) under the EU project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements). The efficacy of education for seismic safety is often inhibited by an incomplete understanding of the process by which individuals decide to protect themselves from harm (Becker JS, Paton D,Johnston DM, Ronan KR. Nat Hazards 64(1):107

Most of the Lisbon 18th century timber-framed masonry

Good performance of non-structural elements can be decisive in saving lives and costs when an earthquake strikes. The European project KnowRISK aims to educate and encourage households to take the necessary precautionary measures to protect people, houses, and contents. Preparedness and prevention act on community resilience. Within the KnowRISK project, the idea of a Practical Guide has been conceived suggesting seismic mitigation solutions for non-structural components to non-experts stakeholders. It is intended to guide people into the first steps of prevention in a straightforward manner, minimizing or avoiding injuries, damage, and long-term financial consequences. The novelty of the Guide belongs to his philosophy: a path through increasing challenges corresponds to a growing level of safety. The idea is that anyone can mitigate seismic risk in its own environment by adopting simple and low cost measures. The Practical Guide may contribute to increase risk awareness. This kind of initiatives if undertaken at larger scales may also enhance social resilience.

When one of the dimensions of a structural member is not clearly larger than the two orthogonal ones, engineers are usually compelled to simulate it with refined meshes of shell or solid finite elements that typically impose a large computational burden. The alternative use of classical beam theories, either based on Euler-Bernoulli or Timoshenko

A non

N/A

This text reflects the first of the four lectures that the author has presented at Udine, Italy, at CISM

Um dos principais problemas e interesses da engenharia sísmica é a caracterizaçãoda acção sísmica, envolvendo a estimativa da intensidade, conteúdo em frequência,duração e variabilidade espacial dos movimentos intensos do solo mais gravosos, emtermos dos seus efeitos nas estruturas, que pode ocorrer num local.O presente trabalho de investigação desenvolve e aplica a metodologia estocástica etécnicas de modelação de fonte

Os sismos são encarados frequentemente como desastres naturais inevitáveis. Todavia,deveriam ser considerados fenómenos naturais, cujos efeitos adversos podem ser minimizadoscaso se proceda a uma gestão efectiva do risco sísmico.O objectivo principal do presente trabalho de investigação é o de avaliar o risco sísmicoem Portugal Continental.Sendo um tema de natureza multidisciplinar, apresentam-se e discutem-se modelos deavaliação probabilística da perigosidade sísmica e sua desagregação, de vulnerabilidade efragilidade sísmicas de tipologias construtivas, de danos e de perdas económicas e humanas.Aplica-se a análise probabilística da perigosidade sísmica, e sua desagregação, aPortugal Continental, obtendo-se cenários modais capazes de reproduzir os níveis deperigosidade que os condicionam. Apresenta-se o inventário do parque habitacional e seushabitantes, descriminado por factores de vulnerabilidade, e classifica-se a sua vulnerabilidadesegundo os modelos de dano. Procede-se à actualização e aferição de uma metodologia parasimulação de cenários sísmicos, integrada num Sistema de Informação Geográfico. Avalia-seo risco sísmico, seguindo diversas abordagens, comparando-se os resultados com o risco deoutros países.Construiu-se assim uma ferramenta de avaliação de perdas devidas a sismos, queconstitui uma primeira contribuição para o desenvolvimento de um processo de gestão dorisco sísmico aplicado ao Continente Português.

O parque habitacional de Portugal Continental contém algumas tipologias construtivas deelevada vulnerabilidade sísmica em relação às quais urge actuar no sentido de reduzir o riscosísmico a elas associado. No projecto de investigação

O presente estudo teve como objetivo a caracterização dinâmica e do comportamento mecânico da estrutura do edifício Sede I da EDP, para uma adequada simulação do seu comportamento sísmico. Neste relatório descrevem-se os ensaios de identificação dinâmica in situ realizados, com base em vibrações ambiente e em vibrações forçadas, com o objetivo de recolher informação sobre as propriedades dinâmicas da estrutura como um todo e das suas lajes dos pisos elevados em particular. Foi efetuado o registo e a análise dos sinais de aceleração devido a vibração ambiente, medidos em diversos pontos do edifício, bem como devido a vibrações forçadas impostas num dos pisos enterrados do edifício. São também apresentados e analisados os ensaios de caracterização do comportamento mecânico de componentes estruturais relacionadas com a ligação das lajes mistas dos pisos elevados às paredes dos núcleos resistentes de betão armado do edifício. Estes consistem em ensaios destrutivos de troços de laje mista ligados aos núcleos, por meio de varões selados à parede, e em ensaios de arrancamento desses varões, tendo como objetivo caracterizar os materiais e componentes dos elementos estruturais. Esta informação é essencial para a posterior calibração dos modelos numéricos da estrutura e para uma realista simulação do seu comportamento sísmico, bem como para uma eventual deteção de anomalias estruturais decorrentes de patologias que possam comprometer o desempenho do edifício face à ocorrência de sismos.

A avaliação da segurança sísmica de edifícios existentes tem como quadro de referência o Eurocódigo 8

Nos estudos probabilísticos para avaliação da perigosidade sísmica, são estabelecidas zonas de geração sísmica (zonas sismogénicas), representando regiões que partilham as mesmas caraterísticas sismológicas, tectónicas e geológicas e definidas as relações entre a frequência com que aí ocorrem os sismos e as respetivas magnitudes, num dado período de tempo. Em 2006, para o Anexo Nacional do Eurocódigo 8, foram consideradas e caraterizadas 11 zonas Sismogénicas para Portugal continental, adaptadas de estudos previamente elaborados em 1996. Entre 2008 e 2009, no âmbito dos projetos ERSTA e SHARE, foram propostas novas zonas sismogénicas, e estimados os respetivos parâmetros da lei de frequência - magnitude. Estas diferentes propostas resultaram em diferentes mapas de perigosidade sísmica para Portugal continental. A SPES, Sociedade Portuguesa de Engenharia Sísmica, espelhando a inquietude existente na comunidade científica face às diversas expressões da perigosidade sísmica em Portugal, e consciente da necessidade de um consenso perante os agentes decisores, considerou urgente a realização de um estudo criterioso acerca das opções tomadas, nos diferentes estudos, e suas implicações. É nestecontexto que surge este trabalho, que pretende fazer uma análise crítica e comparativa dos resultadosobtidos nos diferentes estudos mencionados e as suas implicações ao nível dos períodos de retorno para sismos de maior magnitude. Numa parte II, serão estudadas as implicações em termos de valores da perigosidade sísmica, para vários períodos de retorno e frequências espetrais.

O presente relatório, elaborado no âmbito de um estudo em curso no LNEC sobre a segurança sísmica das construções nas intervenções de reabilitação, sintetiza os instrumentos jurídicos e os conceitos relevantes para a análise do atual regime jurídico da reabilitação urbana (RJRU), e do regime excecional de reabilitação urbana (RERU).

This document reports the outcomes of the research project

This document reports the outcome of the seismic test on the Rusticasa building, the first in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a log house system (LHS). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.

This document reports the outcome of the seismic test on the LegnoCase building, the second in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a platform frame system with sheathing assembled by means of OSB panels (PF-OSB). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.

This document reports the outcome of the seismic test on the RubnerHaus building, the third in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a platform frame system with sheathing assembled by means of gypsum fibre panel (PF-GF). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.

This document reports the outcome of the seismic test on the TUGraz building, the fourth in a total of four buildings included in the TIMBER BUILDINGS Project. This building is a cross laminated system (CTL). The goal of the tests was to assess the seismic performance of the building, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.

The TIMBER BUILDINGS Project, led by the University of Trento, included testing of four full scale multi-story timber houses with a realistic horizontal plan and three types of timber housing systems: platform frame system (PFS), log house system (LHS) and cross laminated timber (CLT). The tests were carried in the LNEC-3D shake table under different levels of excitation and different conditions of the structure.The tests were carried with the goal of assessing the seismic performance of the buildings, panel elements and steel connectors, defined in terms of relative displacements and hold-down forces.The results were presented in separate reports, one for each building. This document contains information common to the remaining four reports.

Análise dos registos históricos de eventos climáticos e o seu impacto no setor da energia da AML, para identificar o grau em que este setor foi afetado por estímulos relacionados com o clima. Avaliação de capacidades adaptativas.

Análise da forma das edificações nas ações do vento

As condicionantes arquitetónicas e de urbanização na ventilação natural

Caracterização do vento. Ações sobre estruturas. Ensaios em túnel de vento