Artigos de Revista
Info
Projeto BSAFE4SEA - Controlo da segurança de quebra-mares através da análise de um sistema de previsão e apoio à decisão - Metodologia e resultados
Neste trabalho apresenta-se o projeto BSafe4Sea - Controlo da Segurança de Quebra-mares através da Análise de um Sistema de Previsão e Apoio à Decisão, que tem como objetivos o desenvolvimento, a aplicação e o teste de metodologias de previsão do comportamento estrutural de quebra-mares de talude. Estas metodologias formarão a base de um sistema inovador de apoio à decisão para o planeamento e priorização de trabalhos de manutenção e reparação, aumentando, assim, a segurança, funcionalidade e resiliência destes quebra-mares. Apresentam-se as atividades do projeto
Ano: 2022
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Santos, J. A.; Capitão, R.; Pinheiro, L.; Lemos, R.; Andriolo, U.; Soares, F.; Henriques, M. J.; Reis, M. T. L. G. V.
Editor: INEGI/FEUP
Keywords: apoio à decisão; previsão; dano; quebra-mares de talude; BSafe4Sea
Info
Projeto TO-SEALERT. Desenvolvimentos recentes
O projeto To-SEAlert tem como objetivo a inclusão de um conjunto de ferramentas/metodologias de modo a tornar o sistema HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) mais eficiente, fiável e robusto. Essas ferramentas incluem o uso de imagens de satélite e de vídeo, de modelação numérica e física, métodos quantitativos e probabilísticos para a avaliação do risco e planeamento de emergência, para melhorar a eficiência e a confiança no sistema, bem como proporcionar a sua validação. Este projeto tem como objetivo principal a implementação de um sistema que seja capaz de apoiar as autoridades responsáveis na monitorização, prevenção e gestão de situações de emergência. Este artigo apresenta o trabalho desenvolvido recentemente nas diferentes tarefas do projeto, entre o qual se pode destacar o desenvolvimento do protótipo do sistema para a zona costeira da Costa da Caparica, a validação do protótipo do porto da Ericeira com recurso a imagens de vídeo-monitorização, o teste de modelos numéricos para o cálculo do galgamento, e a implementação de metodologias de avaliação quantitativa das consequências do risco.
Ano: 2022
Autor(es): Zózimo, A. C.; Fortes, C. J. E. M.; Santos, J. A.; Pinheiro, L.; Lemos, R.; Capitão, R.; Fonseca, A. M.; Roque, D.; Taborda, R.; Silva, A.; Serrazina, V.; Craveiro, J.; Reis, M. T. L. G. V.; Andriolo,
Editor: PIANC
Info
SAFEPORT-SINES. SISTEMA DE SEGURANÇA PARA O PORTO DE SINES
O SAFEPORT-SINES é um sistema de previsão e alerta para a segurança da navegação em zonas portuárias, englobando situações de emergência associadas a navios em trânsito ou amarrados, devidas a condições meteo-oceanográficas extremas. O sistema fornece previsões com 3 dias de antecedência da agitação marítima, das condições de vento e de maré, assim como dos movimentos dos navios, identificando as situações que possam ter consequências gravosas nos navios em manobra ou amarrados dentro do porto. Os níveis de risco associados baseiam-se em critérios de segurança e de operacionalidade, nomeadamente nos movimentos do navio e nos esforços nos elementos de amarração. Neste trabalho apresenta-se o sistema SAFEPORT em termos do seu desenvolvimento e arquitetura, do fluxo e tratamento de dados e do funcionamento dos modelos numéricos utilizados. Apresenta-se ainda o funcionamento da plataforma web e da aplicação móvel onde é possível consultar os parâmetros relevantes para aferir os riscos referidos
Ano: 2022
Autor(es): Santos, J. A.; Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Guedes Soares, C.
Editor: PIANC
Info
Safety System for Ships in Harbours
SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.
Ano: 2022
Autor(es): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.
Editor: E. Rizzuto and V. Ruggiero (Eds.)
Keywords: Risk assessment; storm Dora; Moored ships; Wave propagation; SWAMS; SAFEPORT
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Ano: 2022
Autor(es): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: PIANC
Keywords: fenders; docking; ship; Physical model
Info
Scale model tests of ship impact on fenders
Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel
Ano: 2022
Autor(es): Pinheiro, L.; Simão, J.; Costa, C.E.B.C.; Manso, J.; Marcelino, J.; Fortes, C. J. E. M.
Editor: TEST&E2022
Keywords: fenders; docking; ship; Physical model
Info
SEAlert project. Validation
The To-SEAlert project (Fortes et al., 2021) aims to include a set of tools/methodologies into the Early Warning System HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) to make it more efficient, reliable and robust.
Ano: 2022
Autor(es): Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.; Lemos, R.; Capitão, R.; Taborda, R.; Reis, M. T. L. G. V.; Andriolo, U.; Ferreira, J.; Santos, C.; DUARTE, C.M.
Editor: 16th International Conference Littoral22
Info
SHIP IMPACT ON FENDERS. NUMERICAL MODEL VALIDATION USING EXPERIMENTAL MODELLING TESTS
Marine fenders provide the necessary interface between berthing ships and berth structures (PIANC, 2002). Their absence can cause damage to either the quay or the ship or both the quay and the ship, endangering lives, and property. Due to the complex hydrodynamics around berthing ships, the characterization of the maximum force applied to an individual fender and the force distribution among a set of fenders is an essential factor in the design and safety of maritime structures and the fenders themselves, as well as for improving existing ones. This paper aims to describe a combining physical and numerical modelling of a ship impact on fenders, in order to improve the numerical modelling of this problem.Physical modelling represents a good practice in hydraulic studies, where a scale model is used to reproduce complex dynamic phenomena. However, the use of a sophisticated numerical model (or a package of numerical models) can provide a good means to evaluate the samecomplex physical processes and, in addition, to design and test a large number of alternatives in a short time span.Both types of models have their strengths and weaknesses (Gerritsen and Sutherland, 2011). Physical models provide a natural reproduction of complex non-linear physical phenomena, therefore they are well established and considered to be truthful. On the other hand, these models can be expensive and time consuming. In addition, one has to deal with the scale effect and measurement difficulties and errors are frequent. Numerical models in turn are very efficient to simulate rapidly many physical processes and the results can be easily extracted. On the other hand, to improve the reliability of their use in practice, it is necessary to calibrate several parameters through physical model measurements and field experiments. In order to take advantage of the potentiality of the two models emerged the composite modelling which is the integrated and balanced use of physical and numerical models (Gerritsen and Sutherland, 2011). This technique also costs but provides results with a better quality than those model techniques separately and increases the confidence in the use of numerical models.The physical modeling consists of a ship scaled model, whose impact on the fenders was performed in a wave basin. Various impact velocities and angles between the ship axis and the fenders alignment were used to represent possible collision conditions. The same conditions were reproduced by a numerical package. The numerical modeling was performed using MOORNAV (Santos, 1994), which estimates the ship motions and the forces exerted on the elements of the mooring system, namely mooring lines and fenders.
Ano: 2022
Autor(es): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Santos, J. A.; Simão, J.; Costa, C.E.B.C.
Editor: PIANC
Keywords: Physical Modelling; Numerical Modelling; GulfStream Ship; Fenders; Composite modelling
Info
Simulação com o SAFEPORT do impacto da tempestade Célia nos navios amarrados no porto de Sines
Esta comunicação diz respeito à fase de testes do sistema SAFEPORT, tendo-se avaliado o seu desempenho numa situação de tempestade. Trata-se de um sistema desenvolvido para a segurança da navegação do porto de Sines, e, mais concretamente, nos seus terminais de Granéis Líquidos, Multiusos e Contentores. Para estes terminais, simulou-se o impacto da tempestade Célia nos esforços nos cabos de amarração de um navio petroleiro, de um navio de carga geral e de um navio porta contentores, respetivamente. O sistema SAFEPORT demonstrou ser capaz de antecipar os efeitos nos navios amarrados dos estados de agitação associados à tempestade Célia.
Ano: 2022
Autor(es): Gomes, A.; Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.
Editor: 7as Jornadas de Engenharia Hidrográfica / 2as Jornadas Luso-Espanholas de Hidrografia
Keywords: tempestade Célia; SAFEPORT; Sines; navios amarrados
Info
Structural monitoring of a breakwater using UAVs and photogrammetry
The present project addresses a problem related to the erosion effects on a breakwater barrier due to waves which leads to its degradation and that may eventually lead to lack of functionality of the structure. In the present case, the breakwater acts as a physical barrier between the Atlantic Ocean and the cargo Harbour of Leixões, in Matosinhos, Portugal, justifying the needs of health monitoring of the barrier.To monitor this structure, with a length of roughly 700 m, the need of a fast data acquisition system led to the choice of imaging techniques which allow for a fast acquisition of a diversified data set. The images were acquired using a high-resolution camera attached to an unmanned aerial vehicle (UAV), enabling a faster and more automated procedure that leads to the systematization of the process, while being compatible with the difficult accessibility of the structure, which is surrounded by sea waves. Point clouds corresponding to the breakwater
Ano: 2022
Autor(es): Sousa, P.; Cachaço, A.; Barros, F.; Tavares, P.; Moreira, P.; Capitão, R.; Neves, M. G.; Franco, E.
Revista: Procedia Structural Integrity
Editor: ELSEVIER
Keywords: Breakwater monitoring; Unmanned aerial vehicle; Photogrammetry
|
Comunicações
Info
Modelling wave propagation over vegetation fields with SWASH
The ultimate goal of applying SWASH in the present work is to compare SWASH wave height results with laboratory results presented in Løvås (2000) and with field observations of Vo-Luong and Massel (2008) as well. Additionally, SWASH results will be also compared to the ones previously obtained by other empirical and numerical models (Mendez and Losada, 2004; Suzuki et al., 2012).Preliminary SWASH wave height simulations for breaking random waves over vegetation have shown an overall good agreement to the flume data presented in Løvås (2000). The agreement between SWASH and flume results looked worst at the wave breaking zone, which seems to be improved through a better wave breaking parametrization.
Ano: 2019
Número Páginas:
2p.
Autor(es): Reis, R.; Pires Silva, A.; Fortes, C. J. E. M.; Suzuki , T.
Editor: APRH
Keywords: Wave dissipation; SWASH model; Vegetation; Wave propagation
Info
Physical modelling of wave-induced plant drag coefficient
Most of the previous studies on wave propagation over vegetation fields estimated drag coefficients (CD) for rigid and flexible plants by the so called calibration method which gave similar CD for both types of plants. However, CD may actually be considerably different when the drag force is directly measured. In order to investigate the wave dissipation and CD further, flume experiments for wave propagation over vegetation are conducted with a special focus on the benchmark single cylinder test that calculates CD by direct measurements in single rigid and flexible artificial plants.
Ano: 2019
Número Páginas:
45-46pp.
Autor(es): Reis, R.; Suzuki , T.; LUBBERS, B.; Fortes, C. J. E. M.; Pires Silva, A.
Editor: FCUL
Keywords: Flume experiments; Wave propagation; Plant flexibility; Vegetation
Info
Projeto BSAFE4SEA - controlo da segurança de quebra-mares através da análise de um sistema de previsão e apoio à decisão: desenvolvimentos iniciais
O projeto BSafe4Sea visa desenvolver, testar e comprovar o conceito de previsão do comportamento estrutural de quebra-mares de talude como a base de um sistema inovador de apoio à decisão. A utilização de fotografias aéreas obtidas com veículos aéreos não tripulados, de vídeo e de posicionamento com GNSS, juntamente com a avaliação probabilística do comportamento dos quebra-mares baseada em modelos físicos e numéricos, apoiarão o planeamento e a priorização de trabalhos de manutenção e reparação, aumentando a segurança, funcionalidade e resiliência destas obras. Este sistema é urgente devido à sua relevância para as modernas redes de transporte de mercadorias e passageiros e às condições extremas a que os quebra-mares estão sujeitos, e que se poderão agravar devido às alterações climáticas.
Ano: 2019
Número Páginas:
5p.
Autor(es): Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Capitão, R.; Henriques, M. J.; Silva, H.; Andriolo, U.; Soares, F.; Santos, J. A.; Neves, M. G.; Lemos, R.; Mendonça, A. C.; Pinheiro, L.; Lima, J. N.; Peña,
Editor: APRH
Keywords: Apoio à decisão; Previsão; Dano; Quebra-mares de talude; BSafe4Sea
Info
Recent advances in LNEC´s monitoring of maritime works in Portugal
This paper describes a programme under the responsibility of LNEC for the systematic observation and monitoring of maritime works that has successfully been applied to an extensive number of maritime structures on the Portuguese mainland coast and abroad.The now-called OSOM+ programme comprises the following four main components for each structure: periodic visual inspections by an experienced technician; periodic aerial inspections with a UAV/drone; a ANOSOM-GIS database, to store and/or query obtained information on the observation campaigns, as well as to diagnose present, evolution and risk conditions of the structure; a mobile, portable, application, for real-time input and visualization of the database information.This recently updated methodology encompasses a number of tools and functionalities that are illustrated in this paper with applications to a real case, the Faro-Olhão
Ano: 2019
Número Páginas:
207-219pp.
Autor(es): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Henriques, M. J.
Editor: ISEP
Keywords: Maritime works; Aerial surveys; Systematic monotoring program
Info
Risk forecast system for a moored ferry ship in S. Roque do Pico port
In this paper, the development of such system, called SWAMS ALERT, is detailed and an illustration on how it applies to a real port is presented, namely the port of S. Roque do Pico. SWAMS ALERT is as risk forecast and management system for the safety of transiting ships and moored ships in ports and harbors. This system can be fine-tuned to a specific port, thus becoming a valuable tool to help in the selection of docking and mooring devices. SWAMS ALERT extends the functionality of the wave overtopping events forecast system HIDRALERTA to include the ship
Ano: 2019
Número Páginas:
86-91pp.
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.
Editor: EdiBios
Keywords: Alert system; Moored ships; Forecast system
Info
Sines breakwater harbour: the OSOM+ monitoring program
Since 1986, the National Laboratory for Civil Engineering (LNEC) has developed a program for Systematic Observation of Maritime Works (OSOM) for the structures under the responsibility of the former Port and Maritime Transport Institute (IPTM).The objective of this program is to monitor the behavior of the structures and recommend timely interventions for their maintenance and/or repair. Recently, with the acquisition by LNEC of an unmanned aerial vehicle (UAV, or drone), a number of structural surveys have been carried out to complement the information obtained in above mentioned visual observation campaigns. The UAV provides more detailed and accurate information on the state of the structures. It also allows the assessment of the evolution of structures
Ano: 2019
Número Páginas:
146-151pp.
Autor(es): Fortes, C. J. E. M.; Capitão, R.; Lemos, R.; Neves, M. G.; Silva, L. G.; Henriques, M. J.; Martins, T.
Editor: EdiBios
Keywords: Harbour; Sines; OSOM+
Info
Sistema de previsão, alerta e gestão de risco de galgamentos nos portos de Praia da Vitória, S. Roque do Pico e Madalena do Pico, Açores
Neste artigo descreve-se o trabalho desenvolvido, até ao presente na construção, desenvolvimento e implementação dos 2 novos protótipos do sistema HIDRALERTA para os portos da Madalena do Pico e de S. Roque do Pico, ambos na Ilha do Pico, Açores. Este sistema permite a previsão e alerta de situações de emergência relacionadas com agitação marítima, galgamentos, inundações.
Ano: 2019
Número Páginas:
4p.
Autor(es): Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Pinheiro, L.; Mendonça, A. C.; Poseiro, P.; Barateiro, J.; Serrazina, V.; SALVADOR, M.; Reis, F.; Azevedo, E. B.
Editor: APRH
Keywords: Porto da Praia da Vitória; Porto da Madalena do Pico; Porto de S. Roque do Pico; Estruturas marítimas; Zonas portuárias; Galgamentos; Sistema de previsão e alerta
Info
Three-dimensional surface models of breakwaters, obtained from drone surveys. From the prothotype to the laboratory
The recent acquisition of an UAV (Unmanned Aerial Vehicle), or drone, has enriched ongoing LNEC
Ano: 2019
Número Páginas:
12p.
Autor(es): Lemos, R.; Henriques, M. J.; Capitão, R.; Fortes, C. J. E. M.
Editor: ISEP
Keywords: Drone surveys; Breakwaters; Surface models
Info
Análise da influência da variação da profundidade na interação entre dois navios
Nesta comunicação analisa-se a influência da variação da profundidade na interação hidrodinâmica entre dois navios, um estacionário e outro navegando na vizinhança, com recurso à modelação física e numérica. O navio em movimento é um modelo autopropulsionado à escala do navio de transporte de produtos químicos
Ano: 2018
Número Páginas:
14p.
Autor(es): Pedro, F.; Santos, J. A.; Pinheiro, L.; Fortes, C. J. E. M.; Hinostroza , M.
Editor: APRH
Keywords: Movimentos de navios; Interação navio-navio; Modelo numérico; Modelo físico; Ondas de esteira
Info
Análise das forças atuantes num emissário submarino utilizando um tanque de ondas numérico RANS-VoF
O conhecimento das forças devido à ação das ondas que atuam nos emissários submarinos compostos por uma conduta e anéis de estabilização de betão, para agitação com direção de propagação próxima da direção do emissário, é essencial para o seu dimensionamento. Esta é uma configuração complexa, para a qual a modelação numérica, utilizando modelos 3D de tipo RANS-VoF (Reynolds-Average-Navier-Stokes Volume-of-Fluid), é especialmente adequada para obter uma estimativa das forças na conduta e nos anéis. O presente estudo consiste na simulação de um emissário submarino com anéis de estabilização à escala 1:15 que foi ensaiado num tanque de ondas tridimensional, nas instalações do Danish Hydraulics Institute (DHI), para estudar a influência da direção da agitação incidente e da distância da conduta ao fundo nas forças que atuam no emissário. Foram realizados ensaios sem e com anéis (2 tipos de anéis), para diferentes condições de agitação e direções de agitação incidente (90º, i.e., perpendicular à conduta, 30º e 10º) e para três distâncias da conduta ao fundo (0.0, 0.020 e 0.033m). Os resultados numéricos são comparados aos experimentais para agitação com direcção de propagação perpendicular ao emissário, para 3 alturas de onda incidente. Verificou-se que o modelo de turbulência k-
Ano: 2018
Número Páginas:
1886-1894pp.
Autor(es): Didier, E.; Neves, M. G.; Teixeira, P. R. F.
Editor: FURG
Keywords: Tanque de ondas numérico; Forças. RANS-VoF; Emissários submarinos
|
|
Capítulos de Livros
Info
Multi-functional artificial reefs for coastal protection
N/A
Ano: 2009
Número Páginas:
153-210 pp.
Autor(es): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Teses de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Ano: 1999
Número Páginas:
159 p.
Autor(es): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Ano: 1998
Número Páginas:
594 p.
Autor(es): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Ano: 1998
Número Páginas:
346 p.
Autor(es): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Ano: 1973
Autor(es): Carvalho, M. M.
Editor: ******
|
|
Relatórios
Info
Demonstration and technical tours plan
A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project
Ano: 2022
Autor(es): Batista, F. A.; Marecos, V.; Antunes, M. L.; Macedo, A. L.; Freire, A. C.; Capitão, R.; Arsénio, E.; Maia, L.
Info
Demonstration submission and selection guidelines
The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.
Ano: 2022
Autor(es): Freire, A. C.; Arsénio, E.; Macedo, A. L.; Antunes, M. L.; Capitão, R.; Belinha, M.
Info
Technical tours organization criteria and procedures report
According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.
Ano: 2022
Autor(es): Capitão, R.; Macedo, A. L.; Arsénio, E.; Antunes, M. L.; Freire, A. C.
Editor: TRA LISBON 2022
Info
Data Repository Rules. Deliverable 10.4
This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data from physical modeling; Zenodo; Data repository structure
Info
Data Storage Report. RECIPE Task 8.2: Overtopping events in breakwaters under climate change scenarios
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.
Ano: 2018
Autor(es): Fortes, C. J. E. M.; Mendonça, A. C.; Lemos, R.; Neves, M. G.; Reis, M. T. L. G. V.; Capitão, R.
Keywords: Climate change; Overtopping; Data repository
Info
Facilitating the re-use and exchange of experimental data. Task 10.1 Critical review. D10.2 Critical Review of data flux between laboratory models, numerical models and field case studies
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Field data; Numerical modeling data; Physical modeling data; Data flux
Info
Facilitating the re-use and exchange of experimental data. Task 10.2 Data Standards and Licenses. D 10.3 Data Standards Report
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data management options; Experimental data; Data formats
Info
Protocols for representing variability and unsteadiness in flume facilities. Deliverable Number 8.2
This deliverable is related to task 8.2
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Lemos, R.; Capitão, R.; Neves, M. G.; Reis, M. T. L. G. V.
Keywords: Extreme events; Climate change; Variability in flume facilities
Info
Sistema de previsão, alerta e gestão de riscos causados pela agitação marítima - Relatório inicial Arquitetura e características gerais do sistema para os portos de Madalena do Pico, São Roque do Pi
Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.
Ano: 2018
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.
Keywords: Porto de Praia da Vitória; Porto de São Roque do Pico; Porto de Madalena do Pico; Agitação marítima; Alerta e gestão de riscos; Sistema de previsão
Info
ANÁLISE TEMPORAL DE REGISTOS DA ELEVAÇÃO DA SUPERFÍCIE LIVRE E DE VELOCIDADE EM ENSAIOS EXPERIMENTAIS
N/A
Ano: 2014
Número Páginas:
107p.
Autor(es): Ramos, A.; Gabriel. S.; Simão, J.; Passarinho, A.; Lemos, R.; Fortes, C. J. E. M.
|
|
|
Outros
Info
Avaliação da Estabilidade do Quebra-Mar Destacado do Porto Inglês (Ilha do Maio
Realização de ensaios em modelo físico reduzido 3D para a avaliação da estabilidade do quebra-mar destacado do Porto Inlgês, Maio, Cabo-Verde
Ano: 2023
Autor(es): Soares, R. E.; Fortes, C. J. E. M.; Lemos, R.; Costa, C.E.B.C.; Silva, L. G.; Pinheiro, L.; Neves, M. G.
Info
Physical modelling of wave-induced plant drag coefficient
N/A
Ano: 2019
Autor(es): Reis, R.; Suzuki , T.; LUBBERS, B.; Fortes, C. J. E. M.; Pires Silva, A.
Keywords: Flume experiments; Wave propagation; Plant flexibility; Vegetation
Info
Evaluation of wave overtopping consequences for risk assessment using ANP methodology
Adverse sea conditions can cause emergency situations associated to wave overtopping, which endanger the safety of people and goods, with negative impacts for society, the economy and the environment. Therefore, a methodology to assess the overtopping risk in port and coastal areas is essential for a proper planning and management of these areas.The Portuguese National Laboratory for Civil Engineering (LNEC) has been developing the HIDRALERTA system, an integrated decision-support tool for port and coastal management, which focus in preventing and supporting the management of emergency situations and the long-term planning of interventions in the study areas. It enables the user to calculate the risk for various port and coastal activities, starting with the characterization of sea-waves, wind field and tide levels at the study regions.HIDRALERTA was already tested at different places in Portugal: Costa da Caparica beach, in Almada, and port of Praia da Vitória, in the Azores. However, in both cases, the evaluation of wave overtopping / flooding consequences was carried out using a quite simple approach. In fact, such consequences were assessed only at a global and qualitative level, based on information provided by the responsible authorities.This paper aims at testing a quantitative methodology to evaluate overtopping consequences: the Analytic Network Process (ANP). This methodology was proposed to solve complex decision-making problems and its objective is to calculate the priorities among decision elements which will define their final weights on the consequences. The ANP approach can produce interdependencies between criteria and compute the respective weight of each criterion. Such a network model with dependence and feedback improves the priorities derived from judgements and makes prediction more accurate. So, the ANP allows comparison among clusters of elements. Furthermore, in this methodology we take into account the impacts of alternatives on the importance of criteria, by normalizing the comparison matrix. Thus, the given alternatives can influence the ranking of criteria.Application of the ANP methodology to the case study of Praia da Vitória port is presented and a consequences level map is obtained.
Ano: 2016
Autor(es): Lourenço, I.; Santos, J. A.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Poseiro, P.; Craveiro, J.
Keywords: Praia da Vitória port; Analytic Network Process (ANP); Risk; Wave overtopping
Info
Sistema de alerta para a navegação em portos
Apresenta-se um novo sistema de alerta para navios amarrados em portos que se encontra em desenvolvimento no Laboratório Nacional de Engenharia Civil. O sistema SWAMS_ALERTA é um sistema de previsão e alerta baseado na avaliação do risco associado ao comportamento de navios amarrados em zonas portuárias.Os riscos associados a navios amarrados decorrem de movimentos excessivos, quer no plano horizontal, quer no plano vertical. Estes movimentos podem condicionar as atividades portuárias, nomeadamente cargas e descargas, mas em casos extremos podem levar à ocorrência de situações de emergência, tais como rotura de cabos, rotura de cabeços de amarração ou até colisões com o cais. As consequências deste tipo de situações envolvem sempre grandes prejuízos materiais e por vezes humanos.O sistema SWAMS_ALERTA utiliza as medições e previsões de agitação marítima para a determinação dos seus efeitos em termos de movimentos nos seis graus de liberdade e forças nas amarras e defensas quando o navio se encontra estacionado no cais. Para tal, o sistema recorre a uma série de modelos numéricos, interligados entre si. A comparação destes valores com valores máximos admissíveis pré-estabelecidos permite a avaliação, em tempo real, de situações de emergência e a emissão de alertas dirigidos às entidades portuárias.O sistema é constituído por 4 módulos:I
Ano: 2016
Autor(es): Pinheiro, L.; Lopes, P.; Fortes, C. J. E. M.; Santos, J. A.
Keywords: Navios amarrados; Riscos; Sistema de previsão e alerta
CONSTRUÇÃO DA EXPANSÃO DO PORTO DE SAL-REI 1ª FASE (ILHA DA BOAVISTA CABO VERDE) Ensaios bidimensionais em modelo reduzido Parecer Técnico
Info
Definição da Geometria para um Recife Artificial Multifuncional em Leirosa (Poster)
N/A
Ano: 2010
Número Páginas:
1.
Autor(es): Neves, M. G.; Antunes do Carmo, J.
Editor: Gestão Costeira: Vulnerabilidades e Riscos na Região Centro
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual Report of pOST-dOCTORAL rESEARCH
N/A
Ano: 2005
Autor(es): Reis, M. T. L. G. V.
Editor: ******
Info
Guidelines and Recommendations for River Information Services - PIANC
N/A
Ano: 2004
Autor(es): J.A Covas
Editor: ******
Info
Porto Santo Island. Wave Characterization and propagation. poster apresentado ao International Coastal Symposium (ICS 04)
N/A
Ano: 2004
Autor(es): Fortes, C. J. E. M.
Editor: ******
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual report of Post-Doctoral Research.
N/A
Ano: 2004
Autor(es): Reis, M. T. L. G. V.
Editor: ******
|