Artigos de Revista
Info
Comparative study of the effect of long-term ageing on the behaviour of bitumen and mastics with mineral fillers
This study aims to evaluate the effect of mineral fillers on bitumen ageing. Two different bitumens and four mastics were investigated in the unaged and long-term aged states, based on different properties (consistency, rheology, fatigue resistance and ductility). Mastics stiffened less due to ageing treatment than bitumens, especially with granite filler. However, the results of the performance tests were not definitive regarding the effect of the filler. Aged bitumen showed greater fatigue resistance and higher specific energy of ductile fracture than unaged bitumen, whereas the mastics showed minor variations in the specific energy of ductile fracture with ageing treatment, which is indicative of less ageing, but the fatigue resistance decreased significantly in mastics with one of the bitumens.
Ano: 2019
Número Páginas:
76-89pp.
Autor(es): Carl, C.; Lopes, P.; Sá-da-Costa, M.; Canon Fallaa, G.; Leischner, S.; Micaelo, R.
Revista: Construction and Building Materials
Editor: Elsevier
Volume:
225.
Keywords: Ductility fracture; Fatigue testing; Rheological properties; Ageing; Filler-bitumen interaction; Bituminous mastic
Info
Durability of adhesively bonded joints between pultruded GFRP adherends under hygrothermal and natural ageing
This paper presents an experimental and numerical study about the durability of adhesively bonded joints between pultruded glass fibre reinforced polymer (GFRP) adherends for civil engineering applications. Single lap joint (SLJ) specimens were manufactured using either epoxy (EP) or polyurethane (PUR) adhesive and exposed to the following hygrothermal and outdoor ageing conditions for up to 730 days: water and salt water immersion at 20 °C and 40 °C, continuous condensation at 40 °C, salt fog spray at 35 ºC, and outdoor ageing in Lisbon, Portugal. At predetermined times, the mechanical behaviour of the SLJs was assessed through shear tests, in a dry condition. Results obtained show that hygrothermal ageing detrimentally affected the failure load and stiffness of the SLJs made with both adhesives, although this degradation was balanced to some extent by post-curing effects and the desorption period. The magnitude of such degradation was not significantly influenced by the immersion media, but was largely affected by temperature. Outdoor ageing did not cause significant changes in terms of stiffness; for both adhesives, ultimate load presented a moderate increasing trend, with cyclic pattern, reflecting the effects of seasonal changes in weather. For both adhesives, failure always initiated in one of the GFRP adherends, regardless of the ageing process. However, ageing seemed to affect the portion of bond area with either (light) fibre-tear or adhesive failure: in EP-GFRP specimens, the area with adhesive failure (initially null) increased due to ageing, while in PUR-GFRP specimens (significant in unaged joints) it decreased. The final part of the paper presents non-linear finite element (FE) models of the SLJs; these models were developed to numerically simulate the mechanical performance of the joints and to estimate the influence of ageing on the bond vs. slip laws that describe the interaction between the GFRP adherends.
Ano: 2018
Número Páginas:
475-488.
Autor(es): Sousa, J.; Correia, J. R.; J. GONILHA; Cabral-Fonseca, S.; J.P. FIRMO; Keller, T.
Revista: Composites Part B
Editor: Elsevier Ltd
Volume:
158.
Keywords: Mechanical behavior; Natural ageing; Hygrothermal ageing; Durability; Single lap joint; Adhesively bonded joint; Epoxy adhesive; Polyurethane adhesive; Pultrusion; GFRP
Info
Durability of FRP - concrete bonded joints in structural rehabilitation: a review
Fibre Reinforced Polymer (FRP) composites have been the source of an increasing interest in the field of rehabilitation, namely for repair and strengthening of reinforced concrete (RC) structures. One of the most effective techniques comprises externally bonded FRP composites, in which the efficacy of rehabilitation depends considerably on the integrity and durability of the bond established between the FRP and the substrate, which is provided by a structural adhesive. This paper presents a concise review of critical durability issues associated with the structural bond between FRP and concrete for rehabilitation purposes. A number of factors determining the durability of FRP-concrete bonded joints have been identified and grouped into the following categories: materials adhesive and adherends, joint characteristics and in-service conditions. For each of those factors, the main findings obtained in previous studies are summarized and the aspects that need fuarther investigation are outlined.
Ano: 2018
Autor(es): Cabral-Fonseca, S.; Correia, J. R.; Custódio, J.; Silva, H. M.; Sousa, J.; Machado, Â.
Revista: International Journal of Adhesion and Adhesives
Editor: Elsevier
Keywords: Composite; Concrete; Adhesive; Durability
Info
Effects of thermal cycles on adhesively bonded joints between pultruded GFRP adherends
This paper presents an experimental study about the effects of thermal cycles on adhesively bonded joints between pultruded glass fibre reinforced polyester (GFRP) adherends used in civil engineering structural applications. Single lap bonded joints were produced with two commercial polymeric adhesives - epoxy (EP) and polyurethane (PUR) - and exposed to a mild (Mediterranean) range of thermal variations (-5 °C to 40 °C) for up to 350 cycles in a dry condition. The mechanical performance of the adhesively bonded joints was assessed by means of single lap shear tests. Regardless of the inherent differences between both adhesives, results obtained show that the global effect of thermal cycles on the load vs. displacement response of EP-GFRP and PUR-GFRP joints was similar. For both adhesives, thermal cycles caused considerable reduction of joint stiffness and strength, with maximum reductions of 18% and 22% for EP-GFRP joints, respectively, and 19% and 11% for PUR GFRP joints. The degradation of performance was influenced by post-curing effects, more relevant in the PUR adhesive. Before exposure to thermal cycles, both types of specimens exhibited similar failure mechanisms, which generally (80-90% of cases) involved light fibre tear and fibre tear modes, attesting the effectiveness of the adhesion process and material compatibility. Exposure to thermal cycles did not influence the failure modes of the PUR-GFRP joints; however, EP-GFRP joints became more prone to adhesive failure after being subjected to thermal cycles. Overall, the results obtained indicate that thermal cycles degrade bonded joints between pultruded GFRP adherends; however, for the conditions used in this study, this degradation seems to be compatible with the structural use of this type of joints in civil infrastructure.
Ano: 2018
Número Páginas:
518-529.
Autor(es): Sousa, J.; Correia, J. R.; Firmo, João P.; Cabral-Fonseca, S.; J. GONILHA
Revista: Composite Structures
Editor: Elsevier Ltd
Volume:
202.
Keywords: Durability; Thermal cycles; Adesively bonded joints; Epoxy; Polyurethane; Pultruded GFRP adherends
Info
Some permanent effects of hygrothermal and outdoor ageing on a structural polyurethane adhesive used in civil engineering applications
This paper presents an experimental study about the effects of hygrothermal and outdoor ageing on a polyurethane (PUR) adhesive used in civil engineering applications. Small scale adhesive coupons were exposed to different types of ageing environments for up to two years: (i) immersion in demineralised water at 20 and 40 °C, (ii) immersion in salt water at 20 and 40 °C, (iii) continuous condensation environment at 40 °C, and (iv) outdoor ageing in Lisbon, Portugal. At predetermined times, after a desorption period until constant mass, the effects of such exposure on the physical and mechanical responses of the PUR adhesive was investigated using the following techniques: (i) water sorption, (ii) dynamic mechanical analyses (DMA); (iii) flexural; and (iv) in plane shear tests. The diffusion mechanisms observed were not purely Fickian; a long relaxation period was noticed, with water molecules being continuously incorporated in the adhesive until the end of the experiments; two alternative analytical modelling approaches were successfully used to simulate the diffusion processes. After immersion in water and salt water for two years, the viscoelastic behaviour of the adhesive showed signs of post-curing phenomena, and some of the physical degradation was found to be reversible due to drying, although it was not explicitly quantified; accordingly, the Tg showed increasing trends (11 14%). The mechanical properties of the adhesive showed signs of irreversible degradation mechanisms, more relevant on the in-plane shear properties, with reductions up to 26% in strength and 44% in modulus under the harsher conditions. Flexural properties also exhibited irreversible degradation, with maximum reductions up to 30% in strength and 36% in modulus. Increased temperature did not have a significant effect in the flexural and shear strength, but caused higher degradation in the corresponding moduli. The degradation caused by salt water immersion and continuous condensation was comparable to that in demineralized water immersion (at the same temperature).
Ano: 2018
Número Páginas:
406-419.
Autor(es): Sousa, J.; Correia, J. R.; Cabral-Fonseca, S.
Revista: International Journal of Adhesion and Adhesives
Editor: Elsevier Ltd
Volume:
84.
Keywords: Outdoor ageing; Hygrothermal ageing; Polyurethane; Structural adhesive; Durability
Info
Durability of an epoxy adhesive used in civil structural applications
This paper presents an experimental study about the durability of a cold curing structural epoxy (EP) adhesive exposed to different hygrothermal and outdoor ageing environments, typical of civil engineering applications, for up to two years: water and salt water immersion at 20 °C and 40 °C, continuous condensation at 40 °C, and outdoor ageing in a mild Mediterranean climate. After specific exposure periods, changes in the following physical properties and mechanical behaviour of the adhesive were assessed: (i) media diffusion, through water uptake (in hygrothermal environments); (ii) viscoelastic behaviour, through dynamic mechanical analyses (DMA); and (iii) flexural and (iv) in plane shear behaviour. Regarding media diffusion, water uptake did not follow a Fickian behaviour and a final saturation stage was not reached; two alternative non Fickian analytical models were successfully fitted to the test data and the corresponding diffusion parameters were determined. In what concerns the viscoelastic behaviour, while continuous condensation and outdoor ageing caused negligible changes, the Tg of the adhesive generally decreased due to immersion (around 20% in water and 10% in salt water after two years); in addition, at later stages of water immersion, the tan ? curve showed significant shape differences, with the usual curve peak being replaced by two different peaks; a generalised reduction of the storage modulus at the glassy plateau was also noted. In terms of mechanical performance, such plasticization effects were visible in the flexural and shear stress strain behaviours. The flexural properties exhibited irreversible degradation, with the highest reductions (two years of ageing in water at 40 °C) being about 24% and 30% in strength and modulus, respectively. Regarding the shear properties, in hygrothermal environments the shear modulus showed similar decreasing trends to the flexural modulus (43% reduction after one year), but the shear strength increased (~25%); the outdoor ageing affected the shear properties in the same way, but the magnitudes of the changes were lower.
Ano: 2017
Número Páginas:
618-633pp.
Autor(es): Sousa, J.; Correia, J. R.; Cabral-Fonseca, S.
Revista: Construction and Building Materials
Editor: Elsevier
Volume:
161.
Keywords: Outdoor ageing; Hygrothermal ageing; Durability; Epoxy; Structural adhesive
Info
Creep of sandwich panels with longitudinal reinforcement ribs for civil engineering applications: Experiments and composite creep modeling
N/A
Ano: 2016
Autor(es): Garrido, M.; Correia, J. R.; Keller, T.; Cabral-Fonseca, S.
Revista: Journal of Composites for Construction
Editor: ASCE
Keywords: Glass fiber-reinforced polymer; Polyurethane foam; Composite creep model; Ribs; Composite sandwich panels
Info
Determining creep ratio in buried pipes for applications without pressure. Accuracy of experimental results
Abstract A buried plastic pipe undergoes deformation, but it stabilizes at the end of a certain time not exceeding two years. Thus, there is an interest in determining the extrapolated creep of structured wall plastic pipes at 2 years. The main goal of this work is to present information regarding the assessment of results and their accuracy, based both on the requirements of the product standard [3] and on the uncertainty of the tests.
Ano: 2016
Número Páginas:
8893pp..
Autor(es): Real, L. P.
Revista: Polymer Testing
Editor: Elsevier
Volume:
volume 49.
Keywords: Uncertainty; Structured-wall piping systems; Non-pressure buried pipes; Creep
Info
Durability of glass fibre reinforced polymer pultruded profiles: comparision between QUV accelerated exposure and natural weathering in a mediterranean climate
N/A
Ano: 2016
Número Páginas:
207-219pp.
Autor(es): Sousa, J.; Correia, J. R.; Cabral-Fonseca, S.
Revista: Experimental Techniques
Editor: Wiley
Volume:
40.
Keywords: Experimental tests; Durability; Artificial accelerated ageing (QUV); Natural ageing; GFRP
Info
Effects of thermal cycles on the mechanical response of pultruded GFRP profiles used in civil engineering applications
This paper presents a literature review and results of an experimental study about the effects of thermal cycles on the physical and mechanical properties of pultruded glass fibre reinforced polymer (GFRP) profiles used in civil engineering structural applications. The GFRP profiles used in this study present similar fibre architecture, differing only in their matrix nature: unsaturated polyester and vinylester. Small-scale coupons obtained from both types of GFRP profiles were exposed to a Mediterranean range of thermal variations (-5 °C to 40 °C) for up to 190 cycles in a dry condition. The effects of such exposure on the physical and mechanical response of the GFRP materials were assessed and compared using the following experimental techniques: (a) dynamic mechanical analyses (DMA) to assess the viscoelastic behaviour; (b) tensile, flexural and interlaminar shear tests, to evaluate the mechanical properties; and (c) scanning electron microscopy (SEM), to monitor the potential changes in the microstructure due to the degradation (if any) caused by the thermal cycles, as well as the possible changes into the main mechanisms of fracture. After exposure to thermal cycles, the viscoelastic behaviour of the GFRP profiles presented only slight changes, indicating no significant degradation, neither in the matrix structure nor at the fibre-matrix interphase. In terms of mechanical properties, both types of GFRP materials suffered slight changes regarding tensile and interlaminar shear properties. Flexural properties were more affected, particularly the flexural modulus, especially in the first cycles, as degradation tended to stabilize for increasing cycles. The GFRP profile made of vinylester resin presented better overall performance than the one made of polyester, especially regarding the tensile properties. SEM observations of the surfaces of fracture of mechanically tested pultruded specimens showed two main mechanisms of crack propagation: cohesive rupture (matrix cracking), where the crack propagates inside the matrix, and adhesive rupture (fibre-matrix debonding), where the crack propagates at the interface fibre-matrix. Degradation of the polyester matrix caused by the thermal cycles is evidenced by extensive matrix microcracking and increased fibre-matrix debonding. The vinylester matrix resists better to such degradation as fibre-matrix debonding occurs in less extent, and matrix microcracking is scarcely present.
Ano: 2014
Número Páginas:
12.
Autor(es): Sousa, J.; Correia, J. R.; Cabral-Fonseca, S.; Diogo, A.
Revista: Composite Structures
Editor: Elsevier
Volume:
116.
Keywords: Experimental tests; Polyester; Vinylester; Thermal cycles; Durability; Gfrp
|
Comunicações
Info
Life cycle of bitumen: ageing-regeneration-ageing
Asphalt recycling is nowadays a requirement that accounts for demands on sustainability and energy efficiency. Despite being a minor component, the bitumen binder plays an important role in asphalt performance and also contributes for pavement deterioration. During its full lifetime bitumen faces different aging processes, mainly due to interactions with environment, which involve changes in chemical composition, in structure and microstructure and, by consequence, changes in rheological behavior (rheological material functions and material constants). From the perspective of bitumen regeneration, there are some relevant aspects like: (1) To what extent is it possible revert the ageing of bitumen? (2) To what extent can regeneration processes restore original bitumen properties? (3) What kind of response can we expect from regenerated bitumen when facing a new ageing cycle? There is no single answer to these questions, since several factors are to be considered such as the degree of ageing of bitumen in RAP (Reclaimed Asphalt Pavement), the RAP content and the properties of the new binder added to RAP. The methodology used to evaluate bitumen properties is behind those answer, since it provides the tools for understanding the phenomena that are taking place. The [ageing-regeneration-ageing] life cycle of bitumen used in Portuguese road construction was evaluated following a methodology based on chemical, structural and rheological characterization. Chemical analysis included the follow up of generic fractions (SARA, saturates+aromatics+ resins+asphaltenes) at different stages of the ageing and regeneration processes, as well as the pursuit of oxidation by infrared spectroscopic index. Structure and microstructure were assessed by using gel permeation chromatography (under extreme conditions) and atomic force microscopy. Furthermore, a rheological characterization was done, by measuring the relevant material functions in different regimes (dynamic and permanent (steady)).
Ano: 2016
Número Páginas:
13p.
Autor(es): Sá-da-Costa, M.; Diogo, A.; Farcas, F.
Editor: Eurasphalt & Eurobitume
Keywords: Reclaimed asphalt pavement (RAP) recycling; Chemical properties; Rheology; Ageing; Bitumen
Info
Revestimentos por pintura fotorreticuláveis para proteção superficial do betão
A degradação prematura de infra-estruturas de betão armado devido à corrosão das armaduras é um problema corrente e que pode acarretar custos de reparação elevados. A aplicação de produtos de protecção superficial que restringem o acesso de substâncias agressivas ao interior do betão e às armaduras, nomeadamente do ião cloreto, pode contribuir para aumentar a durabilidade das estruturas. Os produtos de protecção superficial mais comuns, nomeadamente as tintas, as membranas, os produtos de impregnação ou os hidrófugos, são materiais de natureza polimérica - de base acrílica, poliuretanos, poliureias, silicones, epoxídicos, fluorados ou com base em silanos e oligómeros da família dos siloxanos. Atualmente os produtos para protecção superficial do betão encontram-se abrangidos pela norma europeia harmonizada EN 1504-2 e são objecto de marcação CE. Essa norma define as propriedades, os métodos de ensaio para as avaliar e os respectivos requisitos mínimos para vários tipos de produtos que, depois de aplicados na superfície de betão, produzem uma camada superficial protectora ou penetram no betão, impregnando os poros ou tornando a sua superfície hidrofóbica. No entanto, não basta conhecer o tipo de produto e a natureza química do polímero para o seleccionar para uma situação específica de utilização, pois produtos da mesma família podem possuir propriedades de desempenho muito diferentes, que dependem da formulação e do teor dos vários constituintes. Para além disso, as condições de aplicação podem ter uma grande influência nas características do revestimento formado ou no modo como o produto de impregnação penetra no betão. Um dos factores que condiciona o desempenho em situações reais de utilização e também durante a fase de caracterização em laboratório é que o produto aplicado tenha as condições adequadas de secagem e cura. Nesta comunicação apresentam-se os resultados de um estudo experimental demonstrando a influência da eficácia da cura de um revestimento por pintura fotorreticulável, nas suas propriedades de barreira ao ião cloreto.
Ano: 2016
Número Páginas:
10p.
Autor(es): Rodrigues, M. P.; Cabral-Fonseca, S.
Editor: LNEC
Keywords: Proteção superficial do betão; Fotorreticulação; Revestimentos por pintura
Info
Viscoelastic behaviour of composite sandwich panels for civil engineering applications: Experiments and analytical modelling
N/A
Ano: 2016
Número Páginas:
1282-1287pp.
Autor(es): Garrido, M.; Correia, J. R.; Keller, T.; Cabral-Fonseca, S.
Editor: The Hong Kong Polytechnic University
Keywords: Glass-fibre reinforced polymer; Polyurethane foam; Composed creep model; Ribs; Composite sandwich panels
Info
Comportamento e Aplicações de Materiais Plásticos: Durabilidade do PVC para aplicações Exteriores
Este documento apresenta o resumo do trabalho de investigação realizado no âmbito do estudo relativo à durabilidade do poli(cloreto de vinilo) estabilizado, para aplicações exteriores no âmbito da construção. Neste estudo desenvolvem-se e caracterizam-se 4 formulações de PVC estabilizado, adequadas a aplicações exteriores e avalia-se a sua durabilidade mediante comparação de resultados obtidos sob diferentes condições de fotoxidação (exposição natural em Lisboa e envelhecimento artificial acelerado), de forma a avaliar a representatividade e fiabilidade dos métodos de envelhecimento acelerado. Analisam-se os factores da degradação e desenvolvem-se modelos que traduzam a evolução das propriedades químicas e mecânicas do PVC durante o envelhecimento, permitindo fazer uma previsão do seu tempo de vida
Ano: 2012
Número Páginas:
2p.
Autor(es): Real, L. P.
Editor: LNEC
Keywords: Pvc; Durabilidade
Info
Comportamento e Aplicações De Materiais Plásticos: Resistência Termoxidativa do Polietileno para Tubagem Termoplástica
Este documento apresenta o resumo do trabalho de investigação realizado no âmbito do estudo relativo à resistência termoxidativa do polietileno estabilizado para tubagens de plástico, usadas para a distribuição de água, drenagem, saneamento, e canalização de gás. Neste estudo, avalia-se a resisência termoxidativa de vários tipos de polietileno, correntemente usados na constituição de tubagem aplicada no interior e no exterior de edifícios. Determina-se também a energia de activação da reacção de oxidação e prevê-se o tempo de vida nas condições de serviço.
Ano: 2012
Número Páginas:
2p.
Autor(es): Real, L. P.
Editor: LNEC
Keywords: Dsc; Pe
Info
Water resistance of intumescent coatings for fire protection of steel structures
This work aims to study the water resistance of intumescent coatings used for protection of steel structures. The vulnerability of the flame retardant system to water can compromise the performance of the coating due to the solubility of the components. In order to evaluate the water resistance of three selected commercial coatings available in the market, they were exposed to different environments (continuous condensation chamber at 40 ºC and immersion in water). The effects of the mentioned conditions in the flame retardant system were analysed by Thermogravimetry (TG), Fourier Transform Infrared Spectroscopy (FTIR) and Differential Scanning Calorimetry (DSC). In addition, to analyse the foam layer behaviour, the coatings exposed to the above mentioned conditions, were heated up to 750 ºC in a muffle furnace. The results obtained suggested that under high humidity environments the coatings can lose the components responsible for the intumescent process, with adverse consequences to the formation of the insulate barrier layer that protects the structure.
Ano: 2011
Autor(es): Silva, H. M.; Cabral-Fonseca, S.; Rodrigues, M. P.
Keywords: Water resistance; Intumescent coatings
Info
Weathering and polymer degradation. Review article
The main purpose of this Paper is to present a state of the art about weathering and polymer degradation. This review was presented during a training course promoted by the 5th European Weathering Symposium EWS (XXVIIth Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers), which was held in Lisbon on September 21 - 23, 2011, organised on behalf of CEEES (Confederation of European Environmental Engineering Societies) by the German Management Society for Environmental Engineering GUS (Gesellschaft für Umweltsimulation e.V.) and supported by SOPSAR (Sociedade Portuguesa de Simulação Ambiental e de Avaliação de Riscos), APIP (Associação Portuguesa da Indústria de Plásticos) and LNEC (Laboratório Nacional de Engenharia Civil). The main topics of this review are the weathering of polymers and composites, the determination, simulation and effects of relevant climatic quantities, innovative polymer additives, new test procedures and devices, instrumental methods of analysis to evaluate polymer degradation, recent developments in polymeric materials and composites designed for outdoor applications and methods for service-life prediction.
Ano: 2011
Número Páginas:
72p.
Autor(es): Real, L. P.
Editor: EWS
Keywords: Polymers; Weathering
Info
Weathering resistance of the colour of water based coatings for architectural use
N/A
Ano: 2011
Número Páginas:
12 p.
Autor(es): Rodrigues, M. P.
Keywords: Accelerated exposures; Architectural; Coating; Weathering
Info
Aplicação GC-MS/GC-FID à determinação do teor de COV em tintas base aquosa
A presença de Compostos Orgânicos Voláteis (COV) em tintas e vernizes, nocivos à saúde humana e ao meio ambiente, fez com que a Comissão Europeia restringisse os seus teores nestes produtos. O Decreto-Lei (DL) n.º 181/2006 de 6 de Setembro (transposição da Directiva nº 2004/42/CE do Parlamento Europeu e do Conselho) estabelece os limites do teor de COV que podem ser utilizados em tintas e vernizes e define os métodos (ISO 11890-2 e ASTM 2369:2004) para a sua determinação. A norma ISO 11890-2 (ISO 11890-2 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method) define a metodologia para a determinação do teor de COV por Cromatografia Gasosa (GC). Neste estudo foram analisadas quatro tintas de base aquosa, de acordo com a norma, utilizando-se a Cromatografia Gasosa acoplada à Espectrometria de massa (GC-MS) para a identificação dos COV presentes nos produtos e a Cromatografia Gasosa com um detector de ionização de chama (GC-FID) na quantificação do teor COV. O estudo permitiu verificar que a deficiente interpretação de alguns parâmetros da norma (por exemplo, a selecção do composto marcador) e a escolha inadequada de alguns desses parâmetros (nomeadamente do solvente de diluição) podem ter implicações na determinação do teor de COV. Para além da selecção adequada dos parâmetros referidos, a determinação do teor de COV implica uma pré análise da tinta por GC-MS, para a identificação dos COVs presentes na tinta. Caso contrário, desconhecendo os COVs, não se determina o factor de resposta para cada composto e admite-se um factor de resposta igual a 1 (como previsto na norma), o que pode ter repercussões no resultado final.
Ano: 2010
Autor(es): Silva, H. M.; Rodrigues, M. P.; Eusébio, M. I.
Editor: LNEC
Keywords: Compostos orgânicos voláteis; Tintas aquosas
Info
Degradação ambiental de perfis pultrudidos de GFRP constituídos por matrizes de poliéster e viniléster
Neste artigo apresentam-se os resultados preliminares de um projecto de investigação em curso, cujo objectivo é analisar os efeitos de diferentes agentes de degradação ambiental (água desmineralizada, água salgada, condensação em contínuo, nevoeiro salino, ciclos térmicos e radiação ultravioleta) nas propriedades físicas, químicas, estéticas e mecânicas de perfis pultrudidos de polímero reforçado com fibras de vidro (GFRP), constituídos por resina de poliéster ou viniléster
Ano: 2010
Autor(es): Correia, J. R.; Cabral-Fonseca, S.; Carreiro, A.; Costa, R.; Rodrigues, M. P.; Eusébio, M. I.; Branco, F. A.
Keywords: Durabilidade; Perfis de gfrp
|
|
Capítulos de Livros
Renovação da Marca de Qualidade Qualicoat, 2011. Inspecção de 14-07-2011 à empresa J. Silva & Cª. - Licença P-822
|
|
|
Relatórios
Info
Avaliação da qualidade de tubagem de polietileno de alta densidade incorporando material reciclado - Avaliação de propriedades de híbridos do polietileno reciclado de alta densidade com nanoargilas
O presente relatório (relatório 2) contém os resultados de um estudo desenvolvido no Núcleo de Materiais Orgânicos (NMO) inserido num projeto de Pós-Doutoramento com a duração de três anos e teve como objetivo a avaliação do melhoramento das propriedades fisicas e mecânicas de amostras de polietileno reciclado em misturas binárias com nanoargilas ligantes (nanoclays), para aplicação em tubagem na construção civil. Assim, após uma caracterização preliminar de reciclados de polietileno (relatório 1) e antes da análise do desempenho de tubagem incorporando material reciclado (relatório 3), realizou-se um estudo de otimização de formulações introduzindo materiais cerâmicos constituídos por silicatos e aluminatos (nanoargilas) com o objetivo de melhorar algumas propriedades térmicas e mecânicas da matéria-prima. Com diversas técnicas de análise, estando entre elas a calorimetria diferencial de varrimento, a análise mecânica-dinâmica e a termogravimetria, obtiveram-se resultados experimentais que foram analisados a nível estrutural.
Ano: 2012
Número Páginas:
101pp.
Autor(es): Sampaio, M. O.
Editor: LNEC
Info
Avaliação da qualidade de tubagem de polietileno de alta densidade incorporando material reciclado - Avaliação do desempenho e da degradação do polietileno reciclado em tubagem de plástico
O presente relatório, que é o último de uma série de 3, contém resultados de um estudo desenvolvido no Núcleo de Materiais Orgânicos (NMO) da instituição de acolhimento LNEC, inserido num projeto de Pós-Doutoramento, subsidiado pela FCT. O objetivo foi o de avaliar o desempenho e a degradação de tubos incorporando polietileno reciclado, proveniente da indústria portuguesa. Recorrendo à calorimetria diferencial de varrimento foram medidos o tempo e a temperatura de indução à oxidação de compostos granulados usados para o fabrico de tubos, bem como de amostras extraídas de tubos. Através de ensaios de resistência à pressão interior foram caracterizados tubos extrudidos laboratorialmente, utilizando amostras de PEADRepsol PE T1OONN e amostras recicladas, tal como suas misturas percentuais com masterbatch contendo nano argila e antioxidante.
Ano: 2012
Número Páginas:
86pp.
Autor(es): Sampaio, M. O.
Editor: LNEC
Info
Comportamento e aplicação de materiais plásticos - Normalização internacional e europeia aplicável a tubagem de materiais plásticos actualização de Setembro de 2011
Este relatório contém o conjunto de todas as normas EN e ISO referentes a sistemas de tubagem em material plástico, organizadas por aplicação, em vigor à data de Setembro de 2011.
Ano: 2011
Número Páginas:
50pp.
Autor(es): Real, L. P.
Editor: LNEC
Info
Comportamento e Aplicação de Materiais Plásticos. Normalização Internacional e Europeia Aplicável a Tubagem de Materiais Plásticos. Actualização de Setembro de 2011
Este relatório contém o conjunto de todas as normas EN e ISO referentes a sistemas de tubagem em material plástico, organizadas por aplicação, em vigor à data de Setembro de 2011.
Ano: 2011
Número Páginas:
43p.
Autor(es): Real, L. P.
Editor: LNEC
Keywords: Plásticos; Tubagem
Info
Estação meteorológica do LNEC - Edifício principal Terraço da ala nascente compilação de dados Ano 2010
N/A
Ano: 2011
Número Páginas:
57pp.
Autor(es): Cabral-Fonseca, S.
Editor: LNEC
Info
Estação meteorológica do LNEC - Edifício principal Terraço da ala Nascente compilação de dados Ano 2009
No presente relatório apresentam-se os dados meteorológicos do ano de 2009, recolhidos na estação meteorológica existente no Núcleo de Materiais Orgânicos do Departamento de Materiais do LNEC, em Lisboa.
Ano: 2010
Número Páginas:
53pp.
Autor(es): Cabral-Fonseca, S.
Info
REGRAS PARA A CONCESSÃO DE DOCUMENTOS DE APLICAÇÃO A REVESTIMENTOS POR PINTURA PARA PROTECÇÃO DE SUPERFÍCIES DE BETÃO EM CONDIÇÕES DE EXPOSIÇÃO ATMOSFÉRICA
No presente relatório descrevem-se os procedimentos adoptados pelo LNEC no âmbito dos estudos para concessão de um Documento de Aplicação (DA) a revestimentos por pintura para protecção de betão, em condições de exposição atmosférica no exterior e sem influência de tráfego ou de acções químicas severas. Indicam-se também as acções a desenvolver periodicamente para comprovar que continuam reunidas as condições para a concessão do DA.
Ano: 2009
Número Páginas:
27pp.
Autor(es): Rodrigues, M. P.
Info
Tintas aquosas para paredes exteriores de edifícios - Avaliação da resistência à alteração de cor
Procedeu-se à avaliação da resistência à alteração de cor de tintas de várias cores, por observação visual e medição das coordenadas cromáticas e da diferença de cor ao longo do tempo de exposição em condições de envelhecimento natural e artificial, a fim de estabelecer requisitos mínimos para revestimentos por pintura coloridas para paredes exteriores de edifícios. Neste relatório descreve-se o plano experimental adoptado, o trabalho desenvolvido, os resultados obtidos e uma possível metodologia para avaliar a resistência à alteração de cor em tintas para paredes exteriores.
Ano: 2009
Número Páginas:
121pp.
Autor(es): Rodrigues, M. P.; Eusébio, M. I.
Info
Caracterização de betumes modificados com polímeros enquadrada na Norma Europeia EN 14023 Bitumen and bituminous binders Framework specification for polymer bitumens
O presente relatório apresenta os resultados e as conclusões mais relevantes do estudo experimental que foi realizado com o objectivo da caracterização de betumes modificados com polímero com vista ao seu enquadramento na Norma Europeia EN 14023 - Bitumen and bituminous binder - Framework specification for polymer bitumens.
Ano: 2008
Número Páginas:
80pp.
Autor(es): Eusébio, M. I.; Ferreira, E.
Keywords: Norma europeia en 14023; Enquadrada; Com polímeros; Betumes modificados; Caracterização
Info
Caracterização por análise térmica de adesivos estruturais usados na engenharia civil
O presente relatório contém o trabalho final do estágio profissionalizante efectuado no Departamento de Materiais do Laboratório Nacional de Engenharia Civil pela aluna da Licenciatura em Química Tecnológica da Faculdade de Ciências da Universidade de Lisboa, Ana Luísa Seara Pires. O trabalho, intitulado Caracterização por análise térmica de adesivos estruturais usados na Engenharia Civil, teve como objectivo principal contribuir para o conhecimento dos efeitos das condições de cura na temperatura de transição vítrea em três adesivos epoxídicos utilizados na colagem de materiais compósitos reforçados com fibras a estruturas de betão, no âmbito da sua reabilitação.
Ano: 2008
Número Páginas:
111pp.
Autor(es): Pires, A.; Cabral-Fonseca, S.
Keywords: Usados na engenharia civil; Adesivos estruturais; Análise térmica; Caracterização
|
Informações Científicas e Técnicas
Info
Estatística de ensaios interlaboratoriais - Tratamento e avaliação de resultados experimentais
Os resultados experimentais, obtidos através da medição de propriedades dos materiais e produtos, requerem tratamento específico e adequado, de forma a garantir a sua qualidade. É por isso muitas vezes necessário recorrer a métodos estatísticos para fazer a análise do tipo de distribuição dos resultados, proceder à deteção de valores suspeitos num conjunto de observações e à eventual rejeição de resultados anómalos. Este tipo de tratamento estatístico é principalmente adequado a ensaios de intercomparação, quer do foro metrológico (comparação de valores de padrões ou materiais de referência, mediante medição efetuada por operadores de diferentes laboratórios metrológicos, com incerteza variável), quer do âmbito dos laboratórios de ensaio. Os ensaios de Comparação Interlaboratorial realizados por laboratórios de ensaio, constituem uma ferramenta de garantia da Qualidade e são utilizados para a validação de métodos de ensaio (incerteza e robustez) e como um meio para a determinação das características de desempenho dos laboratórios, nomeadamente da reprodutibilidade e da repetibilidade. Nesta publicação faz-se uma descrição dos vários parâmetros que devem ser determinados em ensaios interlaboratoriais do tipo Intercomparações com valor de consenso e respetivos métodos de cálculo. A estatística aqui apresentada pode, numa boa parte dos casos, ser também aplicada à análise de resultados de medições experimentais correntes.
Ano: 2015
Autor(es): Real, L. P.
Keywords: Garantia de qualidade; Método estatístico; Ensaio interlaboratorial
Info
Weathering and polymer degradation - Review article
The main purpose of this Paper is to present a state of the art about weathering and polymer degradation. This review was presented during a training course promoted by the 5th European Weathering Symposium EWS (XXVIIth Colloquium of Danubian Countries on Natural and Artificial Ageing of Polymers), which was held in Lisbon on September 21 - 23, 2011, organised on behalf of CEEES (Confederation of European Environmental Engineering Societies) by the German Management Society for Environmental Engineering GUS (Gesellschaft für Umweltsimulation e.V.) and supported by SOPSAR (Sociedade Portuguesa de Simulação Ambiental e de Avaliação de Riscos), APIP (Associação Portuguesa da Indústria de Plásticos) and LNEC (Laboratório Nacional de Engenharia Civil). The main topics of this review are the weathering of polymers and composites, the determination, simulation and effects of relevant climatic quantities, innovative polymer additives, new test procedures and devices, instrumental methods of analysis to evaluate polymer degradation, recent developments in polymeric materials and composites designed for outdoor applications and methods for service-life prediction.
Ano: 2012
Número Páginas:
135pp.
Autor(es): Real, L. P.
Editor: LNEC
Keywords: Durability of construction materials; Construction materials degradation; Materials construction weathering; Composite materials; Polymer
|
|
Outros
Info
TUBOFURO GEOROSCADO® - Sistema de tubagem para revestimento de furos para a captação de água subterrânea
N/A
Ano: 2013
Número Páginas:
16pp.
Autor(es): DM/NMO
Editor: LNEC
Keywords: Documento de homologação; Conduta enterrada; Captação de água subterrânea; Tubo de cloreto de polivinilo
Info
TUBOFURO HIDROROSCADO® - Sistema de tubagem para furos de captação de água subterrânea
N/A
Ano: 2013
Número Páginas:
12pp.
Autor(es): DM/NMO
Editor: LNEC
Keywords: Documento de homologação; Conduta enterrada; Captação de água subterrânea; Tubo de cloreto de polivinilo
Info
UPONOR - Sistema de distribuição de água para consumo humano em habitações com funcionalidades complementares de proteção contra incêndio
N/A
Ano: 2013
Número Páginas:
20pp.
Autor(es): DM/NMO
Editor: LNEC
Keywords: Protecção contra o fogo; Edifício de habitação; Instalação de edifício; Conduta de distribuição de água; Tubo de polietileno
Info
Spray termoplástico R4 branco
N/A
Ano: 2011
Número Páginas:
8pp.
Autor(es): DM/NMO
Editor: LNEC
Keywords: Europa; Certificação; Pavimento rodoviário betuminoso; Tinta; Termoplástico; Marca rodoviária
Info
3KKK SN2 - Características e condições de emprego em canalizações de saneamento sem pressão, enterradas no exterior de edifícios.
N/A
Ano: 2009
Número Páginas:
4pp.
Autor(es): DM/NMO
Keywords: Pt; Documento de homologação; Conduta enterrada; Canalização de efluente; Tubo de pvc
Info
COLSAN SN2 - CARACTERÍSTICAS E CONDIÇÕES DE EMPREGO EM CANALIZAÇÕES DE SANEAMENTO SEM PRESSÃO, ENTERRADAS NO EXTERIOR DE EDIFÍCIOS
N/A
Ano: 2009
Número Páginas:
4pp.
Autor(es): DM/NMO
Keywords: Pt; Documento de homologação; Conduta enterrada; Canalização de efluente; Tubo pvc
Info
MULTYRAMA - CARACTERÍSTICAS E CONDIÇÕES DE EMPREGO EM SISTEMAS DE DISTRIBUIÇÃO DE ÁGUA QUENTE E FRIA
N/A
Ano: 2009
Número Páginas:
4pp.
Autor(es): DM/NMO
Keywords: Pt; Documento de homologação; Água fria; Água quente; Material compósito; Tubo de plástico; Conduta de distribuição de água
Info
plomyLAYER CARACTERÍSTICAS E CONDIÇÕES DE EMPREGO EM SISTEMAS DE DISTRIBUIÇÃO DE ÁGUA QUENTE E FRIA E DE AQUECIMENTO
N/A
Ano: 2008
Número Páginas:
4pp.
Autor(es): D. MATERIAIS
|