Publicações

The value of on-line UV/vis spectroscopy for wastewater quality monitoring in two different sewage management situations was confirmed. For decentralised wastewater treatment, spectral on-line monitoring of key quality parameters (COD, organic N) at the WWTP inlet was found to be possible, at two plants of different sizes and inflow characteristics. The produced data allowed the dynamic modelling of the treatment processes and the testing of control scenarios. In situ spectral monitoring in sewers was also successfully tested, with high potential in the management of drainage networks subjected to storm water inflows. In both situations, on-line UV/ vis spectrophotometry can thus become a key technology for real-time system management, leading to better use of infrastructures and resources and the achievement of environmental objectives more consistently and at lower costs.

Sustainable water management must nowadays consider alternative water sources and the use ofreclaimed water is a good candidate. Low-pressure ceramic membrane filtration is an emergingoption for safe water reclamation given its high mechanical and chemical robustness with safety andoperational advantages. One-year pilot studies of hybrid coagulation

N/A

The control of water losses is a major concern in the sustainability of urban water utilities and inpromoting the efficient use of this natural resource. Recent advances in telemetry technology providehigh-resolution consumption data at the consumer level, allowing for a remarkable knowledgeimprovement on the different water balance components. However, few studies focus on systematicapproaches for improving system operation and maintenance by processing and analysing largeamounts of consumption data. This paper presents a new methodology to calculate real losses andapparent losses in distribution networks using data collected from telemetry systems. Themethodology proposes a set of algorithms that are simple to implement. These algorithms were testedon different district metered areas (DMA) to improve understanding about water loss components andhave already been included in commercial software. The results showed that these algorithms arerobust and allow for accurately estimating the background leakage level (and unreported leaks andbursts), detecting earlier the occurrence of bursts and providing important insights into the type ofillegal water uses. The use of these approaches reduced non-revenue water by more than 10% in themajority of the DMA tested. These findings are promising and demonstrate the strong potential oftelemetry systems to reduce water losses and to improve the understanding of water uses.

The main goal of a wastewater treatment plant (WWTP) is to comply with the treated wastewater(TWW) quality requirements. However, the assessment of this compliance is a rather complex processfor WWTPs in the EU Member States, since it requires the integration of a large volume of data andseveral criteria according to EU Directives 91/271/EEC and 2000/60/EC. A tool for a comprehensiveassessment of TWW quality in this context is herein presented. The tool's novelty relies on an integratedanalysis of performance indicators (PIs) and new performance indices (PXs). PIs integrate the severalcompliance criteria into a single framework, supported by flowcharts for a straightforward assessment ofTWW compliance by practitioners. PXs are obtained by applying a performance function to the con-centration values analysed in the TWW for discharge or reuse. PXs are dimensionless and the scaleadopted (0e300) defines three performance levels: unsatisfactory, acceptable and good performance.The reference values proposed for these levels and for the PIs were based on the EU legislation. The PXscomplement the information provided by the PIs. While the latter assess the plant effectiveness in agiven year (i.e. the TWW compliance with the requirements), PXs tackle the plant reliability, i.e. theyallow to easily compare the performance of different parameters over the time and to identify when theperformance did satisfy or fail the pre-established objectives and the distance that remains to achievethese targets. The tool was tested in 17WWTPs and the most representative results are herein illustrated.

Adsorption kinetics is a key-issue for a successfulactivated carbon selection and design of the treatmentsystem. Crucial predictive aspects are the determination ofthe diffusion coefficients and the establishment of the controllingadsorption step. Several kinetic models have beendeveloped and two of the most frequently used, the homogeneoussurface diffusion model (HSDM) and the Boyd

The main objectives that generally motivate the implementation of energy management strategies, suggestions of possible assessment criteria and corresponding performance measures are presented in a systematic way. A methodology based on the hydraulic energy balance along waterpipe systems and four performance indices to assess energy efficiency is established. Thismethodology is applied to a real-life water supply system for two consumption scenarios and two operating schemes. The calculation of index E4 and the comparison between scenarios and schemes rely on the hydraulic simulation of the system. The application of this methodology has demonstrated the robustness and practicality of the proposed new performance indices, being particularly relevant for the comparison of different measures for the improvement of energy efficiency, such as the use of variable speed pumps and the installation of micro-turbines. More applications are needed forsystems with different sizes, layouts and elevations in order to identify and to overcome practical application difficulties.

For farmers, management of cattle slurry (CS) is now a priority, in order to improve the fertilizer value of the slurry and simultaneously minimize its environmental impact. Several slurry pre-treatments and soil application methods to minimize ammonia emissions are now available to farmers, but the impact of such management strategies on groundwater is still unclear. A laboratory experiment was performed over 24 days in controlled conditions, with undisturbed soil columns (sandy soil) in PVC pipes (30 cm high and 5.7 cm in diameter). The treatments considered (4 replicates) were: a control with no amendment (CTR), injection of whole CS (WSI), and surface application of: whole CS (WSS), acidi

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

O Guia Técnico n.º 27 concretiza a 4.ª geração do sistema de avaliação da qualidade dos serviços da ERSAR, sendo o resultado de um excelente exemplo de colaboração entre a ERSAR, enquanto entidade reguladora, o Laboratório Nacional de Engenharia Civil e a Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, a quem não podíamos deixar de agradecer, alargando este agradecimento ao universo das entidades gestoras reguladas, cujos contributos prestados durante a consulta ao setor foram integrados nesta versão final.

The European project LIFE IMPETUS demonstrated low-investment, low-energy, flexible, and easy to implement measures for improving the removal of pharmaceutical compounds in urban wastewater treatment plants (WWTPs) with activated sludge (CAS) treatment, the most common biological process in those plants in Portugal and worldwide.The project addressed two major groups of technical solutions: i) operating strategies to enhance the biological treatment for PhC removal, measures identified using sound benchmarking tools, and ii) powdered activated carbon (PAC) addition to the biological reactor, using eco-friendly adsorbents, to control the recalcitrant PhCs and those with incomplete and variable biological removal. These technical guidelines compile the best practices and best lessons learned in LIFE IMPETUS project regarding PhC monitoring and improvement of PhC control in urban CAS-WWTPs using the approached technical solutions. The document aims at an easy and comprehensive use by water practitioners, water regulators, academia, and students of different backgrounds, answering to the questions of what, where, how, how much (cost), and when to monitor and control PhCs in urban CAS-WWTPs. Incentives for PhC control in urban WWTPs are also tackled.

The Technical Guide presents the 4th generation of the service quality assessment system, which abandons some 3rd generation indicators and adds new ones to respond to the latest challenges to supply services, urban waste water management and urban waste management. Changes are also made to definitions and benchmarks for some indicators are adjusted.

O projeto Avaler+

These technical guidelines provides guidance on the use of the hybrid process of powdered activate carbon adsorption and ceramic microfiltration for sustainable drinking water production. They were developed based on the field demonstration of the technology, in Portugal, with a pilot prototype, within the LIFE Hymenb project LIFE12 ENV/PT/001154 "Tailoring hybrid membrane processes for sustainable drinking water production", conducted by LNEC - the National Civil Engineering Laboratory and Águas do Algarve, S.A.

O objetivo do presente Guia é a apresentação e a especificação dosistema correspondente à 2.ª geração de avaliação da qualidade dosserviços de abastecimento de água, de saneamento de águas residuaisurbanas e de gestão de resíduos urbanos prestados pelas entidadesgestoras sujeitas a regulação.Este sistema constitui uma peça fundamental do modelo de regulaçãoem implementação pela ERSAR, sumariamente descrito neste Guia emais detalhadamente descrito em [1], nomeadamente no que respeitaà componente da regulação da qualidade do serviço, de forma a tornarpossível a avaliação quantificada.Note-se que, de acordo com o disposto na alínea e) do n.º 1 do artigo 5.ºdo Decreto-Lei n.º 277/2009, de 2 de outubro, a ERSAR tem atribuiçõesnão apenas para assegurar a regulação da qualidade de serviço prestadoaos utilizadores pelas entidades gestoras, mas também para avaliaro desempenho dessas entidades, promovendo a melhoria dos níveis deserviço. É no quadro destas atribuições que se pretende promover estesistema de avaliação da qualidade dos serviços de águas e resíduos.A 2.ª geração do sistema de avaliação da qualidade do serviço resultouda análise crítica do sistema de indicadores adotado na 1.ª geração e darespetiva aplicação desde 2004 ao universo das entidades concessionáriase teve em conta o estado atual de conhecimentos e a experiênciainternacional entretanto adquirida.Para além da identificação e da especificação de todos os componentesdo sistema de avaliação, e em particular do conjunto de indicadores dequalidade do serviço a utilizar em cada um dos três tipos de serviços,são também definidos os procedimentos de avaliação, através dadefinição da informação a obter, do cálculo de indicadores, da sua interpretaçãoe análise comparativa, numa perspetiva de benchmarking, eda produção do relatório de síntese.

N/A

O objectivo do presente Guia é a apresentação e a especificação do sistema correspondente à 2.ª geração de avaliação da qualidade dos serviços de abastecimento de água, de saneamento de águas residuais urbanas e de gestão de resíduos urbanos prestados pelas entidades gestoras sujeitas a regulação. Este sistema constitui uma peça fundamental do modelo de regulação em implementação pela ERSAR, sumariamente descrito neste Guia e mais detalhadamente descrito em [1], nomeadamente no que respeita à componente da regulação da qualidade do serviço, de forma a tornar possível a avaliação quantificada. Note-se que, de acordo com o disposto nas alíneas e) do artigo 5.º do Decreto-Lei n.º 277/2009, de 2 de Outubro, a ERSAR tem atribuições não apenas para assegurar a regulação da qualidade de serviço prestado aos utilizadores pelas entidades gestoras bem como para avaliar o desempenho dessas entidades, promovendo a melhoria dos níveis de serviço. É no quadro destas atribuições que se pretende promover este sistema de avaliação da qualidade dos serviços de águas e resíduos. A 2.ª geração do sistema de avaliação da qualidade do serviço resultou da análise crítica do sistema de indicadores adoptado na 1.ª geração e da respectiva aplicação desde 2004 ao universo das entidades concessionárias e teve em conta o estado actual de conhecimentos e a experiência internacional entretanto adquirida. Para além da identificação e da especificação de todos os componentes do sistema de avaliação, e em particular do conjunto de indicadores de qualidade do serviço a utilizar em cada um dos três tipos de serviços, são também definidos os procedimentos de avaliação, através da definição da informação a obter, do cálculo de indicadores, da sua interpretação e análise comparativa, numa perspectiva de benchmarking, e da produção do relatório de síntese.

Os objetivos da nova DARU são ambiciosos, exigindo maior eficácia e eficiência

Asset management (AM) has become increasingly important in various sectors and organizations over the lastfew decades. This introductory chapter provides an overview of asset management to facilitate a comprehensive understanding of AM, summarizing its application to urban drainage asset management (UDAM), an asset-intensive sector. The chapter includes a short history, from general AM to UDAM, and refers to milestones, key organizations, and standards. It describes AM principles and different perspectives to approach the subject. The UDAM context is outlined, providing the general processes which can influence strategic, tactical, or operational decision levels, accounting for the specific perspectives and objectives on the subject. The main approaches applied to UDAM are broadly described, some of which incorporate a balance of costs, risks, opportunities, and performance, while others focus on specific aspects. The chapter presents different types of approaches to AM, ranging from those based on condition, reliability, and risk to those based on value, followed by those based on performance or quality of service, highlighting common aspects or overlaps between them. When appropriate, guidance to the chapters where additional information on the subject can be found is provided. Finally, challenges, limitations and opportunities are highlighted.

The number of climate-related disasters has progressively increased in the last two decades and this trend will drastically exacerbate in the medium- and long-term horizons according to climate change projections. In this framework, through a multi-disciplinary team and a strong background acquired in recent projects, ICARIA aims to promote the use of asset-level modeling to achieve a better understanding of climate related tangible direct and indirect impacts on critical assets due to complex, cascading, and compound disasters. Furthermore, it takes into account the related risk reduction provided by suitable, sustainable, and cost-effective adaptation solutions. ICARIA focuses on both (i) critical assets and services that were not designed for potential climate change-related impacts that can increase the unplanned outages and failures, and (ii) on housing, natural areas, and population. Cutting edge methods regarding climate scenario building, asset-level-coupled models, and multi-risk assessment approaches will be implemented and replicated in three EU regions to understand how future climate scenarios might affect critical assets and to provide decision-making support tools to private and public risk owners to assess the costs and benefits of various adaptation solutions.

Activated carbons are versatile adsorbents that can play a crucial role in the enhancement of wastewater treatment, namely by controlling organic microcontaminants of emerging concern (CECs) and organic matter. These materials have a 100-year market availability, large scientific testing at lab-scale and applicability in consolidated technologies. However, the use of activated carbons at full-scale wastewater treatment is still emerging, driven by the increasing awareness on environmental and human threats mainly resulting from CECs. The present chapter reviews the literature on the application of activated carbons in full- or large pilot-scale plants, highlighting the state-of-art knowledge on practical issues on operational set-ups, improvements on water overall quality, and costs. The selection criteria and properties of the powdered and granular (PAC and GAC) materials used, and the pros and critical aspects of their application, relevant for product development and process optimisation, are also analysed and determine the research needs proposed for a technical, economic, and environmentally sustainable application of activated carbon in full-scale advanced wastewater treatment.

Urban areas are dynamic, complex, and vulnerable systems involving multiple strategic services such as water supply, wastewater, and stormwater and waste management. Climate-change trends may directly affect the urban water cycle, through heavy rainfall, tides, and droughts, potentially causing cascading impacts with serious consequences for people, the natural and built environments, and the economy. These challenges to urban areas require an integrated and sustainable approach to increase their resilience, with the allocation of the needed resources, including the development and implementation of disaster risk reduction (DRR) strategies, plans, and regulations in all relevant sectors. This chapter describes a resilience-assessment framework to be used by cities and urban-service managers. It considers a structured and objective-driven assessment aiming at supporting the development and monitoring of cities' and urban services' resilience action plans, thus contributing to appropriate DRR investments. Our approach considers four resilience dimensions: organizational, spatial, functional, and physical. It is aligned with the UNDRR's Disaster Resilience Scorecard for Cities and addresses the priorities of the Sendai Framework for Disaster Risk Reduction. In this chapter, we apply the resilience-assessment framework to the waste and mobility sectors in Lisbon (Portugal), identifying main opportunities to enhance their resilience and supporting the development of resilience and DRR strategies.

Atualmente os sistemas urbanos de água são reconhecidos como infraestruturas in­dispensáveis de suporte para a prestação de serviços públicos de primeira necessida­de à saúde e bem-estar das populações e à economia das sociedades

This paper aims to explain why and how innovative technologies are enablers of strategic asset management (SAM) of water supply, wastewater and storm water systems.

Urban areas are dynamic, complex, and vulnerable systems involving multiple strategic urban services, stakeholders, and citizens. Strategic services essential to society include water and sewerage (water supply, and wastewater and stormwater management), waste management, energy supply, public lighting, transport, and public security. The potential effects of climate dynamics on the urban areas might lead to the aggravation of existing fragile conditions and the emergence of new hazards or risk factors, with major impacts on strategic urban services, people, the natural and built environment, and the economy. Climate change challenges to urban areas thus require an integrated and sustainable approach to increase their resilience, with the allocation of the needed resources at all administrative levels. These include the development and implementation of disaster risk reduction (DRR) strategies, policies, plans, laws, and regulations in all relevant sectors (UNISDR, 2015). This chapter describes a resilience assessment framework to be used by cities and urban-service managers. The framework considers a structured and objective-driven assessment aiming at supporting the development and monitoring of cities

This chapter briefly presents concepts and methodologies to support the management of urban drainage infrastructure. After the introduction, data requirements for assessing the condition of urban drainage systems are presented. Data can be collected in different ways. Data analysis allows for determining structural and functional issues and system performance. The causes and consequences of failures are required for condition assessment and are the subject of the risk section. Any intervention in the urban drainage system has a cost that must be assessed. Mathematical modelling of the urban drainage systems has an advantage for evaluating the hydraulic and structural performance. Decisions on the management of urban drainage rehabilitation need to be addressed considering the different points of view or aspects that are often contradictory. This may be addressed by using multi-criteria decision analysis methodologies.

Urban water services make use of extensive networked infrastructures - water supply and drainage systems. Efficient management of these services relies on the quality of measurements of hydraulic variables in pipes and sewers to support robust analysis of systems

This research aims at developing a comprehensive approach for assessing the energy use and efficiency in wastewater systems, considering the water-energy-greenhouse gas (W-E-G) emissions nexus supported by methods and tools, such as a tailored energy balance and a performance assessment system (PAS). This approach is aligned with continuous improvement principles and allows carrying out the diagnosis of energy efficiency in wastewater systems supporting the building of a portfolio of energy use improvement measures responding to strategic objectives and attending to the systems

Drinking water storage tanks are essential components of water supply systems to store water, to level off pressure in networks and to meet emergency storage. They are also frequent sources of deterioration of drinking water quality and safety owing to inadequate tank design and operation. Mostly, existing tanks design, dimensions and operation do not account for water mixing and renewal.

Nature-Based Solutions (NBS) are crucial to achieving the goals of the United Nations Agenda 2030 for sustainable development and other global agendas, such as the Paris Agreement on Climate Change. In the last decade, the NBS umbrella concept has become more relevant intending to contribute to urban resilience and to address the climate change challenges. NBS are living solutions inspired by nature that use or mimic natural processes intending to face several societal challenges, from the perspective of resource-efficient use and the promotion of economic and environmental benefits. Currently, cities are encouraged to understand and measure the NBS contribution to identify adequate strategies for enhancing resilience and prioritize investments accordingly. The objective of the present thesis is to promote and enhance the NBS implementation in cities, focused on solutions for stormwater management and control. Based on the analysis of their contribution to urban resilience, the potential to meet environmental, social, and economic challenges and to adapt across diverse urban scales and contexts is demonstrated. In this sense, a Resilience Assessment Framework (RAF) to assess the NBS contribution to urban resilience was developed. This framework aims to assess the NBS contribution to urban resilience. Moreover, a Guidance for the RAF application in cities with different resilience maturity was developed, which involved the RAF validation by seven cities (from a national and international context), that participated voluntarily in this phase. In this context, the developed RAF is comprehensive and multidimensional. It is driven by the definition of objectives, criteria, and metrics, according to the proposed structure for assessing the water supply and wastewater system service performance in the framework of the ISO 24500 standards of the International Organization for Standardization. For an oriented assessment of the criteria, qualitative and quantitative metrics were defined, considering data from different sources and complexity. Reference values were also identified and metrics' classifications were defined. In this classification, each answer is associated with a resilience development level, intending to assess the NBS contribution to urban resilience on a normalized scale. To support the RAF application to cities with different resilience maturity (in terms of resilience and available information), three analysis degrees (essential, complementary, and comprehensive) and a set of metrics were proposed, which are pre-defined in the guidance for the RAF application. To support the selection of the analysis degree more adequate to any city, a structure to characterize the city's profile was developed. This complementary profile also supports the interpretation of the RAF results, both at the city and at the level of specific NBS. To conclude, the application of the RAF essential analysis degree to the seven participating cities, with different challenges regarding urban resilience and NBS, and of the comprehensive analysis degree (complete RAF) to Porto´s urban area, through an assemble assessment at the city and NBS levels, were presented.

Over the past two decades, performance assessment (PA) has been one of the areas show-ing the greatest advancement in the water sector. PA aims to measure effectiveness and/or efficiency of an activity or process using performance metrics, supporting the decision-making process and the continuous improvement of water utilities. Despite the potential benefits, few projects, and initiatives on PA have been undertaken regarding storm water systems (SWS). The present thesis aims to develop a performance assessment framework (PAF), applicable to both conventional SWS and sustainable urban drainage systems (SUDS), objective driven and focused on systems

Infrastructure asset management (IAM) has been increasingly becoming a key topic in the mind-set shift of the water sector managers and policy makers, allowing to assist in the operational, tactical and strategic decision-making in urban water infrastructures. Nevertheless, IAM implementation by the water utilities is still far from needed and not widespread, due to several challenges and constraints, mainly associated with limited human, technological and financial resources. The current research aims at enhancing urban water infrastructure asset management through an integrated decision-making approach, that includes novel methodologies for condition assessment, service life prediction and cost modelling. This approach can be applied at three assessment levels

Este trabalho tem como objetivo melhorar a eficiência energética dos sistemas de abastecimento de água através do desenvolvimento de uma metodologia orientada por objetivos e com recurso ao balanço energético e a métricas de desempenho que permitem identificar as principais origens de ineficiência energética dos sistemas, comparar diferentes alternativas de intervenção e contribuir para a melhoria contínua destes sistemas.A metodologia de investigação seguida contempla desenvolvimentos científicos aliados a uma aplicação prática num conjunto alargado de casos de estudo através de ferramentas de cálculo automático desenvolvidas para o efeito. Os desenvolvimentos científicos consistem na formulação matemática de um balanço energético flexível em termos de dados necessários para a sua implementação; o desenvolvimento de métricas de desempenho que permitem identificar a origem das ineficiências energéticas (equipamentos, perdas de água ou configuração e operação) e a sua sistematização numa metodologia que segue os princípios de melhoria contínua (Plan-Do-Check-Act). A aplicação a casos de estudo é efetuada em três etapas. A primeira etapa consiste na aplicação do balanço energético agregado e métricas de desempenho para diagnosticar ineficiências a nível global em sistemas sem modelo matemático. A segunda etapa consiste na aplicação de um balanço detalhado com recurso a modelos matemáticos, bem como uma análise de sensibilidade aos diferentes métodos. A terceira etapa centra-se na aplicação detalhada de dois casos de estudo para ilustrar a metodologia.Os principais resultados são: i) uma metodologia integrada para o diagnóstico água-energia em sistemas de abastecimento de água; ii) um novo balanço energético para sistemas de abastecimento de água; iii) resultados da aplicação do balanço e das métricas de eficiência energética em 110 sistemas; iv) ferramentas para cálculo das diferentes formulações de balanço energético e de métricas de desempenho; e v) valores reais e exemplos de soluções não convencionais que conduziram a melhorias de desempenho energético.

As estações de tratamento de águas residuais (ETAR) são atualmente alvo de esforços de melhoria do seu desempenho técnico, ambiental e económico. Empresas, reguladores e organismos de financiamento têm utilizado sistemas de avaliação de desempenho para apoiar as suas decisões. Neste contexto, o LNEC desenvolveu a 1.ª e 2.ª geração do sistema de avaliação de desempenho (PAS) de ETAR baseado em indicadores (PIs) e índices de desempenho (PXs). Para ambos, os valores de referência para o julgamento do desempenho são elementos chave. Apesar de serem elementos cruciais, os valores de referência precisavam ainda de ser definidos para avaliar e melhorar o desempenho das ETAR com foco na eficiência energética e gestão de afluências pluviais. Assim, o objetivo da tese foi desenvolver a terceira geração do PAS com valores de referência para avaliar o desempenho. Os PIs e PXs focam os objetivos principais da ETAR, ou seja, garantir a sustentabilidade técnica, econômica e ambiental, garantindo um tratamento eficaz e fiável com o consumo mínimo de energia, reagentes e produção de lamas. A estratégia seguida consistiu em desenvolver ou selecionar a partir da segunda geração do PAS sub-conjuntos de PIs e PXs de acordo com os objetivos, nomeadamente, eficácia, fiabilidade, desempenho energético e consumo de reagentes e gestão das lamas. Os valores de referência foram derivados com base numa revisão da literatura, equações empíricas e/ou estudos de campo e, sempre que aplicável, incorporam o efeito de parâmetros chave, de modo a avaliar o efeito das variações de caudal e de concentração. Foi desenvolvida uma análise estatística dos PXs para avaliar a fiabilidade da ETAR. Foi também demonstrada a flexibilidade do sistema de avaliação de desempenho para diferentes objetivos e uma abordagem para diagnosticar oportunidades de melhoria do desempenho, utilizando os PIs e PXs num ciclo PDCA (plan-do-check-act).

Este trabalho de investigação teve como objectivo principal propor, aplicar e validar uma metodologia que permitisse transformar dados de consumo urbano de água, obtidos a partir de sistemas de telemetria, em informação útil para a gestão dos serviços de água e para os consumidores.A metodologia encontra-se estruturada em quatro módulos: planeamento e monitorização,processamento de dados, produção de informação de caracterização e previsão eclassificação. Tirando partido de dados de consumo telemedidos aos vários níveis, desde o cliente individual às zonas de medição e controlo (ZMC), procede-se à aplicação dametodologia para caracterização de grandes consumidores, previsão do consumodoméstico nocturno, avaliação do efeito da variação de pressão no consumo autorizado enas perdas de água e previsão do consumo em ZMC.Para além da metodologia estruturada para a análise de consumos, as principaiscontribuições inovadoras são o desenvolvimento de modelos de previsão e de classificação do consumo em ZMC, em função das variáveis explicativas mais significativas, e a obtenção de expressões para a variação do consumo autorizado e das perdas reais com a pressão.O trabalho desenvolvido contribuirá para um uso mais eficiente da água, através de ummelhor conhecimento sobre as várias componentes do consumo urbano de água, assimcomo para o estabelecimento de critérios de projecto e de exploração da rede maissustentados.

Os serviços de abastecimento de água (SAA) têm vindo a incorporar princípios desustentabilidade na sua prática de gestão. O estado da arte em metodologias de avaliação dedesempenho de SAA mostrou a necessidade de abordar especificamente o tratamento,considerado insatisfatoriamente nas abordagens sistematizadas existentes.Na presente dissertação desenvolveu-se um sistema de avaliação de desempenho (PAS) deestações de tratamento de água (ETA), orientado por objectivos, normalizado e quantitativo,destinado a apoiar a tomada de decisão, e cobrindo os domínios qualidade da água tratada,eficiência/fiabilidade, utilização de água, energia e materiais, gestão de subprodutos, segurança,recursos humanos e económico financeiros.O PAS integra uma componente para avaliação do desempenho global, baseada em indicadoresde desempenho, e uma componente para avaliação do desempenho operacional, baseada emíndices de desempenho que avaliam, numa escala 0-300, a qualidade da água tratada, eficiênciasdas várias operações/processos unitários (OPU) e sua relação com condições de operação.Foi desenvolvida uma ferramenta de cálculo automático do PAS.A aplicação do PAS a cinco ETA de características diversas permitiu avaliar a evoluçãotemporal do seu desempenho, comparar estações e OPU, e identificar oportunidades de melhoriana operação das OPU, na qualidade da água tratada e utilização de recursos.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

Este estudo visa aumentar a confiança na reutilização segura da água, utilizando tecnologias de tratamento avançado como ultrafiltração, ozonização e osmose inversa para avaliar a sua eficácia e limitações. Desenvolvido numa estação de tratamento de águas residuais (ETAR), o estudo comparou a qualidade da água resultante de processos em grande escala, como a ultrafiltração, com água tratada adicionalmente através de um sistema piloto de ozonização e osmose inversa, ou apenas osmose inversa. Todos os esquemas de tratamento estudados produziram água adequada ao consumo humano.

EXCLUSIVO: AWARE-P vence prémio alemão e conquista novo reconhecimento internacional: É a primeira vez que é distinguido um projecto de um país que não fala alemão, entrevista de Ana Santiago (Jornalista do Jornal Água & Ambiente - Portal Ambiente Online) a Helena Alegre, 19 de Agosto de 2014

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A