Publicações

N/A

Decisions to mitigate seismic risk require a consistent approach to evaluate the effects of future earthquakes on population, on civil engineering structures and infrastructures.The mathematical and probabilistic methods that are the support to those approaches are generally called Risk Analysis; in the particular case of seismic events andmitigation strategies it will be named Seismic Risk and Mitigation Analysis, SRMA. The paper will address the subject of estimating the seismic risk and evaluate mitigation strategies for the existing building stock of the metropolitan area of Lisbon by describing the methods and showing preliminary results obtained with LNECloss numerical tool. Even though such a sophisticated tool needs validation on some parameters to become more reliable, it is shown that it is possible to compare results of different mitigation strategies.

This paper describes the shaking table tests, and their main results, of an asymmetric limestone masonry building, under different reinforcement conditions. The work was performed in the aim of the project

No âmbito de um projecto denominado

In this study, we simulate and compare ground motion shaking in the city of Lisbon and surrounding counties (metropolitan area of Lisbon (MAL)), using two possible earthquake models: the onshore source area of Lower Tagus Valley, M5.7 and M4.7 and the offshore source area, Marques de Pombal Fault, M7.6, one of the possible source of the 1755 Lisbon earthquake. The stochastic and a new hybrid stochastic-deterministic approach (DSM) are used in order to evaluate the ground shaking and to characterize its spatial variability.Results are presented in terms of response acceleration spectra (PSA) and peak ground acceleration (PGA) with respect to bedrock and surface. Site effects are evaluated by means of equivalent stochastic non-linear one-dimensional ground responses analysis, performed for a set of stratified soil profile units properly designed to cope with the soil site conditions of MAL region. A sensitive study is carried out using different input parameters and different approaches in order to give the basic information to evaluate the range of uncertainty in seismic scenarios.

In this study, we simulate and compare ground motion shaking in the city of Lisbon and surrounding counties (metropolitan area of Lisbon (MAL)), using two possible earthquake models: the onshore source area of Lower Tagus Valley, M5.7 and M4.7 and the offshore source area, Marques de Pombal Fault, M7.6, one of the possible source of the 1755 Lisbon earthquake. The stochastic and a new hybrid stochastic-deterministic approach (DSM) are used in order to evaluate the ground shaking and to characterize its spatial variability. Results are presented in terms of response acceleration spectra (PSA) and peak ground acceleration (PGA) with respect to bedrock and surface. Site effects are evaluated by means of equivalent stochastic non-linear one-dimensional ground responses analysis, performed for a set of stratified soil profile units properly designed to cope with the soil site conditions of MAL region. A sensitive study is carried out using different input parameters and different approaches in order to give the basic information to evaluate the range of uncertainty in seismic scenarios.

This article describes the dynamical behavior of free-standing block structures under seismic loading. A comprehensive experimental investigation has been carried out to study the rocking response of four single blocks of different geometry and associations of two and three blocks. The blocks, which are large stones of high strength blue granite, were subjected to free vibration, and harmonic and random motions of the base. In total, 379 tests on a shaking table were carried out in order to address the issues of repeatability of the results and stability of the rocking motion response. Significant understanding of the rocking motion mechanism is possible from the high quality experimental data. Extensive experimental measurements allowed to discuss the impulsive forces acting in the blocks and the three-dimensional effects presented in the response.

Stone masonry in historical buildings. Ways to increase their resistance and durability

This paper describes the behavior of single rigid-block structures under dynamic loading. A comprehensive experimental investigation has been carried out to study the rocking response of four blue granite stones with different geometrical characteristics under free vibration, and harmonic and random motions of the base. In total, 275 tests on a shaking table were carried out in order to address the issues of repeatability of the results and stability of the rocking motion response. Two different tools for the numerical simulations of the rocking motion of rigid blocks are considered. The first tool is analytical and overcomes the usual limitations of the traditional piecewise equations of motion through a Lagrangian formalism. The second tool is based on the discrete element method (DEM), especially effective for the numerical modeling of rigid blocks. A new methodology is proposed for finding the parameters of the DEM by using the parameters of the classical theory. An extensive comparison between numerical and experimental data has been carried out to validate and define the limitations of the analytical tools under study.

A caracterização do parque habitacional existente em Portugal Continental no que respeita à sua vulnerabilidade sísmica e a sua classificação em tipologias construtivas são os principais objetivos do presente artigo.Esta caracterização e classificação estão enquadradas num estudo de âmbito mais vasto que é o de avaliação do risco sísmico de Portugal Continental [Sousa,2005] que, por sua vez, requer o conhecimento prévio da vulnerabilidade sísmica do seu parque habitacional.Neste contexto, apresenta-se o panorama da construção existente em Portugal Continental, caracteriza-se e evolução das práticas construtivas ao longo do tempo, identificam-se os principais tipos de construção que subsistem e se praticam no Continente, descrevem-se, de forma sumária, os respetivos sistemas estruturais, mencionando as suas principais vulnerabilidades face à ação dos sismos (entendidas como as deficiências do seu desempenho sísmico), e tipificam-se as soluções construtivas mais correntes enquadrando-as nas tipologias identificadas no Censos 2001.

Desenvolveram-se modelos estocásticos, não-estacionários, que consideram os processos físicos de geração e propagação da energia sísmica desde a fonte até ao local, com considerações relativas à geometria e ao processo de ruptura na fonte sísmica e às características do meio de propagação. Os parâmetros necessários para a utilização destes modelos foram calibrados utilizando os registos obtidos na rede acelerográfica nacional. Simulou-se os movimentos intensos do solo para uma grelha de magnitudes, distâncias e frequências para sismos de origem continental e de origem oceânica, obtendo-se, assim, leis de atenuação espectrais regionais distintas para os dois ambientes, para Portugal Continental.

Decisions to mitigate seismic risk require a logical and consistent approach to evaluate the effects of future earthquakes on population, on civil engineering structures and infra-structures. The mathematical and probabilistic methods that are the support to those approaches are generally called Risk Analysis; in the particular case of seismic events and mitigation strategies it will be named Seismic Risk and Mitigation Analysis (SRMA).

This work presents a case study of a dwelling with a typical VMC installation, consisting on mechanical exhausts sited in service areas (kitchen and bathroom). It was considered the particular situation of an undergoing smoldering fire in an open fireplace located in the living room. A CFD simulation of the airflow inside the house was performed using NIST1 Fire Dynamics Simulator (FDS), prescribing recommended rates for mechanical outflow and approximate thermal and mass flux conditions for the smoldering combustion.Under these conditions, it was observed an inflow of air from the chimney above the fireplace, promoting pollutants dispersion in the house. Future work is encouraged for a better understanding of smoldering combustion in a fireplace application in order to develop a better model. Present values over estimate emissions but indicate the need for a more detailed investigation accessing the real risk for the occupant

Nos últimos anos tem-se vindo a intensificar a pesquisa no domínio dos sistemas de proteção sísmica na área da engenharia civil, estando esta a ser orientada no sentido da obtenção da melhor resposta das estruturas face à ocorrência de determinadas situações de catástrofe natural. Uma das situações que origina maior número de perdas de vários níveis é a ocorrência de um sismo.A proteção sísmica de estruturas de edifícios pode ser efetuada de várias formas: passiva, ativa, híbrida ou semi-activa, sendo a que engloba sistemas passivos a que se encontra até ao momento mais implementada a nível mundial. No entanto tanto os sistemas ativos como os sistemas híbridos ou, ainda, os semi-activos, estes últimos aliando as vantagens tanto dos ativos como dos passivos, começam a ser adotados nos mais variados tipos de estruturas e considerando as solicitações mais adversas.Apesar da utilização de sistemas passivos se encontrar generalizada em alguns países do mundo, nomeadamente em zonas de elevada sismicidade, como forma de, entre outras coisas, minimizar e controlar os efeitos dos sismos, em Portugal o estado dos conhecimentos ainda se encontra numa fase embrionária, estando a sua aplicação a estruturas de edifícios correntes pouco implementada, principalmente atendendo ao facto de ainda não haver uma sensibilização adequada ao nível das entidades envolvidas no processo.Com o presente artigo pretende-se fazer um ponto de situação no estado atual dos conhecimentos na área da proteção sísmica a nível mundial e tentar analisar a sua aplicabilidade à realidade portuguesa. A implementação de sistemas de proteção sísmica a estruturas de edifícios em Portugal é certamente uma aposta com futuro por permitir a minimização das consequências diretas e indiretas associadas à ocorrência de sismos de magnitude elevada e de na maioria dos casos se obter uma relação custo-benefício vantajosa.

A utilização de dispositivos de dissipação de energia é atualmente vista como uma forma eficiente para proteger estruturas contra ações sísmicas. Um número considerável deste tipo de dispositivos tem vindo a ser instalados um pouco por todo o mundo. Muito recentemente dispositivos do tipo Tuned Liquid Dampers (TLD) tem despertado a atenção da comunidade científica internacional como forma simples mas eficaz para reduzir a resposta de edifícios quando sujeitos a ações dinâmicas.Os TLDs são tanques com água, com relações entre comprimento e altura de água tais que a sua frequência natural quase que se ajusta à frequência natural da estrutura cuja amplitude se pretende mitigar. A energia de vibração do edifício é transferida para a água em movimento (sloshing) onde se dissipa. Os princípios básicos de funcionamento são semelhantes aos observados para os Tuned Mass Dampers (TMDs), com a vantagem da instalação ser muito mais fácil e económica. Tanto TLDs como TMDs apresentam bom desempenho para estruturas flexíveis, de frequências naturais pouco elevadas.Em Portugal, devido principalmente à reduzida altura das construções, este tipo de dispositivos não é muito conhecido ou utilizado. Não obstante isso as construções Portuguesas modernas tem uma tendência natural para se tornarem mais flexíveis sendo portanto previsível que o uso de TLDs se torne uma boa opção para redução dos deslocamentos horizontais sofridos pelas estruturas, atendendo aos custos reduzidos associados à construção, colocação e manutenção destes dispositivos. O artigo descreve o estudo experimental sobre TLDs iniciado em Bristol (U. Bristol) e em continuação no LNEC, apresentando alguns dos resultados preliminares obtidos.

The present paper aims to explore damage assessment in the masonry structures at an early stage by vibration measurements. Two replicates of historical constructions were built in virgin state: one arch with 1.5 m span and one shear wall with 1.0 m2. Afterwards, progressive damage was applied and sequential modal identification analysis was performed at each damage stage, aiming to find adequate correspondence between dynamic behavior and internal crack growth. Accelerations and strains in many points were record in the replicates. Eigen frequencies, mode shapes and modal strains were derived from the dynamic measurements. Environmental effects of the temperature and relative humidity on the dynamic response were studied. A first updating process was performed on the results of the undamaged arch to tune a finite element model. Moreover, the tests were repeated with added masses to scale the mode shapes. Finally, a brief analysis of the results of the several damage scenarios are presented in the paper.

This paper concerns to the post-occupancy monitoring of a building sited in Lisbon with transparent double-skin façades (DSF). This is the first of an enlarged monitoring program covering other buildings and weather conditions aiming to clarify under which climate and performing conditions this architectural solution is acceptable. Within this campaign an enlarged set of parameters were measured, covering from outdoor conditions to indoor comfort. The present paper focus is the thermal behaviour of the façade.

This paper studies the dynamic behaviour of rigid-block structures under seismic behaviour. For this purpose, an experimental investigation has been carried out on the rocking response of single blocks, and ensembles of two and three blocks structures. These structures were subjected to three different base motions: free rocking, harmonic and random excitations. The tests were performed at the seismic table of the National Laboratory of Civil Engineering (LNEC) of Portugal.

Esta comunicação descreve os ensaios sísmicos efetuados no LNEC a uma estrutura pré-fabricada de betão armado. Os ensaios foram desenvolvidos com o apoio da Comissão Europeia e no âmbito do projeto de investigação PRECAST STRUCTURES EC8

Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. In several years EN 1998 will be the main seismic code for all European countries. But it is well known, that in many large earthquakes older existing structures cause much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical

This book presents a selection of the best papers from the HEaRT 2015 conference, held in Lisbon, Portugal, which provided a valuable forum for engineers and architects, researchers and educators to exchange views and findings concerning the technological history, construction features and seismic behavior of historical timber-framed walls in the Mediterranean countries. The topics covered are wide ranging and include historical aspects and examples of the use of timber-framed construction systems in response to earthquakes, such as the gaiola system in Portugal and the Bourbon system in southern Italy; interpretation of the response of timber-framed walls to seismic actions based on calculations and experimental tests; assessment of the effectiveness of repair and strengthening techniques, e.g., using aramid fiber wires or sheets; and modelling analyses. In addition, on the basis of case studies, a methodology is presented that is applicable to diagnosis, strengthening and improvement of seismic performance and is compatible with modern theoretical principles and conservation criteria. It is hoped that, by contributing to the knowledge of this construction technique, the book will help to promote conservation of this important component of Europe

The applications of discrete elements models based on rigid block formulations to the analysis of masonry walls under horizontal out-of-plane loading is simplified block pattern are addressed. Two procedures for creating irregular block systems are presented, one using Voronoi polygons, the other based on a bed and cross joint structure with random deviations. A test problem provides a comparison of various regular and random block patterns, showing their influence on the failure loads. The estimation of manual frequencies of rigid block models, and its application to static pushover analyses, is addressed. An example of application of rigid block model to wall capacity problem is presented.

The overall aim of Sub-Project 10 (Earthquake disaster scenario predictions and loss modelling for urban areas) has been to create a tool, based on state-of-the-art loss modelling software, to provide strong, quantified statements about the benefits of a range of possible mitigation actions, in order to support decision-making by urban authorities for seismic risk mitigation strategies. A further larger aim has been to contribute to a seismic risk mitigation policy for future implementation at European level. Among the European cities for which loss estimation studies have been carried out are Istanbul, Lisbon and Thessaloniki, and tools, using GIS mapping, have been developed by research teams in each of these cities; these were made available for further development to examine mitigation strategies within SP10. Related research studies

Much work in Earthquake Engineering was devoted to the improvement of earthquake resistant design of new structures. One European result is EN 1998, which will be in several years the main seismic code for all European countries. But it is well known, that older existing structures cause in many large earthquakes much more casualties and damages than new structures. It is certainly not possible to retrofit all existing structures, but agreement exists, that assessment and retrofit of safety - critical - structures and lifeline structures must have priority. In September 2004 the European Integrated Research Project LESSLOSS on Risk Mitigation for Earthquakes and Landslides was started. The project will run for three years and comprises 13 Sub-Projects (SP´s). The consortium consists of 46 partners (see http:\\www.lessloss.org). LESSLOSS SP5 is on In-situ Assessment, Monitoring and Typification of buildings and Infrastructure. The project partners of SP5 are ARS, CESI, LNEC, RWTH and VCE. This Sub Project focuses mainly on the assessment of important existing structures and tries to integrate experimental methods into the assessment procedure. The progress of SP5 obtained in the first year is summarized in this paper. Highlights presented by all partners are mentioned and the assessment of Hospital Innsbruck is presented in more detail. The most innovative task of LESSLOSS/ SP5 is Update of vulnerability estimates via monitoring, which was also started in the first year.

In order to study the behavior of bridge structures in relation to traffic, wind and seismic loads, it is extremely important to know their actual dynamic properties (natural frequencies, vibration mode shapes and damping). The experimentally identified dynamic properties of bridge structures are also an effective way to characterize their actual global structural behavior. Whether included in the reception load tests of recently built bridges, before they are opened to the traffic, or as part of the inspection works of bridges already in service, LNEC has performed modal analysis studies based on the results of ambient vibration tests. Some of the studies carried out recently in important bridges are reported in this paper.

O sismo de Northridge ocorreu na parte norte da área metropolitana de Los Angeles, Califórnia, às 4:31 h do dia 17 de janeiro, uma segunda-feira coincidente com dia de feriado nacional, tendo atingindo uma magnitude de 6.6 na escala de Richter. O número total de vítimas mortais cifra-se em 57, havendo para cima de 8 000 feridos e 20 000 desalojados.As estimativas de perdas totais, feitas em meados de fevereiro de 1994, apontavam para valores de 15 biliões de US dólares, tendo o Estado da Califórnia apresentado um impacto económico total de ordem dos 30 biliões de dólares, perto do valor do Orçamento Geral do estado Português para 1994. Os prejuízos infligidos na indústria e no comércio são também surpreendentemente elevados, exigindo longos períodos de interrupção das atividades económicas.

Within the realm of natural hazards, geohazards are recognised as being particularly complex and often having the potential of triggering disasters. This complexity has led to increased political commitment and interest in engaging multi-stakeholder and citizens in disaster risk management. The AGEO project explored new forms to foster collaboration between civil society and authorities, using the rapidly developing field of citizen science and its innovative tool of citizens

Communicating science within disaster risk reduction using methods that encourage two-way dialogue between scientists and laypersons is a challenging task. This paper aims at presenting a methodological strategy of communicating risk and non-structural seismic protection measures through participatory approach. Such methodological strategy is part of a pilot experience of risk communication in two schools in Lisbon (Portugal) under the EU project KnowRISK (Know your city, Reduce seISmic risK through non-structural elements). The efficacy of education for seismic safety is often inhibited by an incomplete understanding of the process by which individuals decide to protect themselves from harm (Becker JS, Paton D,Johnston DM, Ronan KR. Nat Hazards 64(1):107

Most of the Lisbon 18th century timber-framed masonry

Good performance of non-structural elements can be decisive in saving lives and costs when an earthquake strikes. The European project KnowRISK aims to educate and encourage households to take the necessary precautionary measures to protect people, houses, and contents. Preparedness and prevention act on community resilience. Within the KnowRISK project, the idea of a Practical Guide has been conceived suggesting seismic mitigation solutions for non-structural components to non-experts stakeholders. It is intended to guide people into the first steps of prevention in a straightforward manner, minimizing or avoiding injuries, damage, and long-term financial consequences. The novelty of the Guide belongs to his philosophy: a path through increasing challenges corresponds to a growing level of safety. The idea is that anyone can mitigate seismic risk in its own environment by adopting simple and low cost measures. The Practical Guide may contribute to increase risk awareness. This kind of initiatives if undertaken at larger scales may also enhance social resilience.

When one of the dimensions of a structural member is not clearly larger than the two orthogonal ones, engineers are usually compelled to simulate it with refined meshes of shell or solid finite elements that typically impose a large computational burden. The alternative use of classical beam theories, either based on Euler-Bernoulli or Timoshenko

A non

N/A

This text reflects the first of the four lectures that the author has presented at Udine, Italy, at CISM

Um dos principais problemas e interesses da engenharia sísmica é a caracterizaçãoda acção sísmica, envolvendo a estimativa da intensidade, conteúdo em frequência,duração e variabilidade espacial dos movimentos intensos do solo mais gravosos, emtermos dos seus efeitos nas estruturas, que pode ocorrer num local.O presente trabalho de investigação desenvolve e aplica a metodologia estocástica etécnicas de modelação de fonte

Os sismos são encarados frequentemente como desastres naturais inevitáveis. Todavia,deveriam ser considerados fenómenos naturais, cujos efeitos adversos podem ser minimizadoscaso se proceda a uma gestão efectiva do risco sísmico.O objectivo principal do presente trabalho de investigação é o de avaliar o risco sísmicoem Portugal Continental.Sendo um tema de natureza multidisciplinar, apresentam-se e discutem-se modelos deavaliação probabilística da perigosidade sísmica e sua desagregação, de vulnerabilidade efragilidade sísmicas de tipologias construtivas, de danos e de perdas económicas e humanas.Aplica-se a análise probabilística da perigosidade sísmica, e sua desagregação, aPortugal Continental, obtendo-se cenários modais capazes de reproduzir os níveis deperigosidade que os condicionam. Apresenta-se o inventário do parque habitacional e seushabitantes, descriminado por factores de vulnerabilidade, e classifica-se a sua vulnerabilidadesegundo os modelos de dano. Procede-se à actualização e aferição de uma metodologia parasimulação de cenários sísmicos, integrada num Sistema de Informação Geográfico. Avalia-seo risco sísmico, seguindo diversas abordagens, comparando-se os resultados com o risco deoutros países.Construiu-se assim uma ferramenta de avaliação de perdas devidas a sismos, queconstitui uma primeira contribuição para o desenvolvimento de um processo de gestão dorisco sísmico aplicado ao Continente Português.

O parque habitacional de Portugal Continental contém algumas tipologias construtivas deelevada vulnerabilidade sísmica em relação às quais urge actuar no sentido de reduzir o riscosísmico a elas associado. No projecto de investigação

O Laboratório Nacional de Engenharia Civil (LNEC) participa atualmente numa das sete Tarefas, doprojeto Europeu SHARE- Seismic Hazard Harmonization in Europe, mais precisamente na tarefa nº 2,intitulada Requisitos de engenharia e aplicações.O presente relatório de progresso descreve a participação do LNEC na sub-tarefa 2.5 - Cenários derisco sísmico para cidades Europeias selecionadas

N/A

No presente relatório pretendem-se apresentar e definir alguns das linhasorientadoras para a simulação do comportamento dinâmico de fluidos no interior deAmortecedores de Líquido Sintonizado (TLDs), de acordo com o proposto na literatura.O problema da modelação do comportamento de fluidos no interior deAmortecedores de Líquido Sintonizado, à semelhança do que acontece parareservatórios, é complexo, sendo apresentados os principais modelos matemáticos emecânicos utilizados na actualidade.Assim serão descritos modelos de comportamento adoptados no casoparticular dos Amortecedores de Líquido Sintonizado (TLDs) e modelos simplificadosde sistemas de 1 (SDOF) ou mais graus (MDOF) de liberdade com com os referidosdispositivos de mitigação de acções dinâmicas acopladosO presente relatório servirá, à semelhança dos relatórios Sistemas passivos,activos, híbridos e semi-activos: Estado dos conhecimentos, Actividade experimentalna área dos sistemas passivos para a protecção sísmica de estruturas: Experiência doNESDE e Modelos de comportamento dinâmico para fluidos no interior dereservatórios como uma das linhas orientadoras para o desenvolvimento dos trabalhospropostos no âmbito do PIP 2009-2012 do NESDE-DE Protecção Sísmica deEstruturas: Reabilitação, reforço e sistemas inteligentes.

N/A

N/A

N/A

This Report corresponds to Task 2 of the NEFOREEE (New Fields of Research inEarthquake Engineering Experimentation) Project and comprises the description of theLNEC triaxial seismic platform and a presentation of the experimental programdeveloped in the scope of this Project.It is presented a description of the facility and the 3D seismic table with graphicalsupport, drawings of sizing and photographs, as well as its control system. The maininstrumentation available at the NESDE laboratory and used for this test is alsoincluded in this report.The model tested is described as well as the sequence of tests and the correspondingobtained results. Finally a brief analysis of the results is made.

O presente relatório final do projecto USuET integra o trabalho já apresentado norelatório de progresso de Sousa & Afonso [2007], nomeadamente no que toca aoscapítulos 2, 3 e parte do capítulo 4 e, adicionalmente, descreve, em detalhe, asactividades desenvolvidas no projecto desde a data desse relatório (secção 4.2, ecapítulos 5 e 6). A parte da investigação conducente à actualização do Simulador deCenários Sísmicos para ambiente WebSIG, aplicado ao Arquipélago dos Açores, não seencontra descrita com o mesmo detalhe, neste relatório, pois enquadra-se na tese demestrado em Sistemas de Informação Geográfica de Afonso [2007], submetida àUniversidade Técnica de Lisboa. A versão definitiva desta tese, cuja discussão se prevêainda em 2008, será enviada oportunamente.

N/A

This report describes the second phase activity of the Portuguese group in the Precast Structures EC8 research project. The Portuguese group is composed by Laboratório Nacional de Engenharia Civil (LNEC) and the Civibral, S.A. precast company. This phase follows the shaking table tests of a 2 stories structure of the same precast system, which is commercialized by Civibral. More information about these tests can be found in the repor.The goal of the work presented in this document is to assess the seismic behaviour of column-foundation and beam-column connections from the same precast system. To help achieve this goal, 4 column-foundation and 10 beam-column connections were tested using quasi-static, monotonic and cyclic tests, which were made imposing displacements to the specimens. The column-foundation connections (CFC) can be categorized as socket connections and the beam-column connections (BCC) as dry connections using only mechanical devices to transmit forces between elements. All the specimens were supplied and mounted by Civibral personal.

Análise dos registos históricos de eventos climáticos e o seu impacto no setor da energia da AML, para identificar o grau em que este setor foi afetado por estímulos relacionados com o clima. Avaliação de capacidades adaptativas.

Análise da forma das edificações nas ações do vento

As condicionantes arquitetónicas e de urbanização na ventilação natural

Caracterização do vento. Ações sobre estruturas. Ensaios em túnel de vento