Artigos de Revista
Info
Um modelo hidromecânico para análise de fundações de barragens gravidade em betão
Apresenta-se a formulação explícita de um modelo hidromecânico em pequenos deslocamentos, baseado numa tecnologia de elementos finitos de junta. O modelo hidromecânico proposto requer um esquema de pré-processamento robusto, de modo a garantir que os contactos entre os diversos blocos que representam o maciço rochoso de fundação e a barragem são somente aresta/aresta. A parte mecânica do modelo, apesar de limitada a pequenos deslocamentos, tem a vantagem de permitir uma representação rigorosa da distribuição de tensões ao longo das juntas. A parte hidráulica do modelo é perfeitamente compatível com a parte mecânica. O modelo hidromecânico é validado recorrendo a uma situação hipotética de uma barragem gravidade fundada num maciço com fraturação regular e a uma situação real de uma barragem em serviço, comparando os resultados com os obtidos com um modelo discreto em grandes deslocamentos. São também comparados os resultados de análises de estabilidade, concluindo-se que é possível avaliar a segurança ao deslizamento de barragens gravidade em betão recorrendo a modelos de interação em pequenos deslocamentos.
Ano: 2015
Número Páginas:
05-33pp..
Autor(es): Azevedo, N.; Braga Farinha, M. L.
Revista: Geotecnia
Editor: Sociedades de Geotecnia de Portugal e Brasil: SPG, ABMS e ABGE
Volume:
Vol 133.
Keywords: Elementos finitos de junta; Modelo hidromecânico; Fundações de barragens gravidade
Info
A DEM based tool for the safety analysis of masonry gravity dams
A numerical model for analysis of masonry gravity dams based on the Discrete Element Method is presented.The dam and the rock foundation are represented as block assemblies, using elementary 3- and 4-node blocks. Complex block shapes are obtained by assembling the elementary blocks into macroblocks,allowing the model to be applied in various situations ranging from equivalent continuum to fully discontinuumanalysis. A contact formulation was developed, which represents the interaction between macroblocksin terms of contacts established between elementary blocks, based on an accurate edge
Ano: 2014
Número Páginas:
248-260pp.
Autor(es): Bretas, E. M.; Lemos, J. V.; Lourenço, P.
Revista: Engineering Structures
Editor: Elsevier
Volume:
59.
Keywords: Failure mechanisms; Discrete elements; Masonry dams
Info
Crack-path field and strain-injection techniques in computational modeling of propagating material failure
The work presents two new numerical techniques devised for modeling propagating material failure, i.e. cracks in fracture mechanics or slip-lines in soil mechanics. The first one is termed crack-path-field technique and is conceived for the identification of the path of those cracks, or slip-lines, represented by strain-localization based solutions of the material failure problem. The second one is termed strain-injection, and consists of a procedure to insert, during specific stages of the simulation and in selected areas of the domain of analysis, goal oriented specific strain fields via mixed finite element formulations. In the approach, a first injection, of elemental constant strain modes (CSM) in quadrilaterals, is used, in combination of the crack-path-field technique, for obtaining reliable information that anticipates the position of the crack-path. Based on this information, in a subsequent stage, a discontinuous displacement mode (DDM) is efficiently injected, ensuring the required continuity of the crack-path across sides of contiguous elements. Combination of both techniques results in an efficient and robust procedure based on the staggered resolution of the crack-path-field and the mechanical failure problems. It provides the classical advantages of the
Ano: 2014
Número Páginas:
289-348pp.
Autor(es): Oliver, J.; Dias, I. F.; Huespe, A.E.
Revista: Computer Methods in Applied Mechanics and Engineering
Editor: ELSEVIER
Volume:
274.
Keywords: Embedded discontinuities; Strain injection; Crack-path field; Strong discontinuities; Computational material failure; Fracture
Info
First Infilling of the Venda Nova II Unlined High-Pressure Tunnel: Observed Behaviour and Numerical Modelling
The underground structures of the Venda NovaII reversible hydroelectric power scheme present features that make it an interesting case study. Worthy of mention are the inclination and length of the unlined pressure tunnel, the high water head and the great depth of the powerhouse cavern. In projects of this type, the main effect ofthe internal water pressure in the pressure tunnel is the establishment of seepage from the tunnel into the rock mass, which can reach the adits and the powerhouse cavern.This seepage is influenced by several factors, such as the geometry of the underground openings, the rock massproperties
Ano: 2014
Número Páginas:
885
Autor(es): Lamas, L.; Leitão, N. S.; Esteves, C.; Plasencia, N.
Revista: Rock Mechanics and Rock Engineering, Special Issue: Water Issues in Underground Excavations
Editor: Springer
Volume:
Volume 47, Number 3.
Keywords: Hydromechanical analysis; Observed behaviour; First infilling; Unlined pressure tunnel
Info
Stress wave propagation test and numerical modelling of an underground complex
Ground vibration is the most important environmental effect of blasting, and tools for its understanding and control are a prime necessity for the excavation of tunnels and caverns in hard ground. This paper contributes to an improved understanding of the way waves travel in the ground, particularly when there are excavations in the path of propagation, while also enhancing existing numerical models to better simulate that behaviour and thus provide better means to address underground vibration impacts. To this purpose, twenty low intensity blast between neighbour tunnels of an underground complex were performed, followed by a numerical study of the test. The test and simulation showed that, contrary to what is implied in semi-empirical attenuation laws, factors like the propagation path or local amplification can be more important than instant explosive weight and distance to blast.
Ano: 2014
Número Páginas:
21p..
Autor(es): Resende, R.; Lamas, L.; Lemos, J. V.; Calçada, R.
Revista: International Journal of Rock Mechanics & Mining Sciences
Editor: Elsevier
Volume:
72.
Keywords: Vibration impact; Dynamic modelling; Tunnelling; Vibration; Blasting
Info
The effect of skew angle on the mechanical behaviour of masonry arches
tThis paper presents the development of a three dimensional computational model, based on the DiscreteElement Method (DEM), which was used to investigate the effect of the angle of skew on the load carryingcapacity of twenty-eight different in geometry single span stone masonry arches. Each stone of the archwas represented as a distinct block. Mortar joints were modelled as zero thickness interfaces which canopen and close depending on the magnitude and direction of the stresses applied to them. The variablesinvestigated were the arch span, the span: rise ratio and the skew angle. At each arch, a full width verticalline load was applied incrementally to the extrados at quarter span until collapse. At each load increment,the crack development and vertical deflection profile was recorded. The results compared with similar
Ano: 2014
Número Páginas:
53-59pp.
Autor(es): Sarhosis, V.; Oliveira, D.; Lemos, J. V.; Lourenço, P.
Revista: Mechanics Research Communications
Editor: Elsevier
Volume:
61.
Keywords: Discrete elements; Numerical modelling; Arches; Masonry
Info
A 3D generalized rigid particle contact model for rock fracture
Purpose - The rigid spherical particle models proposed in the literature for modeling fracture in rock have some difficulties in reproducing both the observed macroscopic hard rock triaxial failure enveloped and compressive to tensile strength ratio. With the purpose of obtaining a better agreement with the experimental behaviour, a 3D generalized rigid particle contact model based on a multiple contact point formulation is presented which allows moment transmission and includes in a straightforward manner the effect of friction at the contact level.Design/methodology/approach
Ano: 2013
Autor(es): Azevedo, N.; Lemos, J. V.
Revista: Engineering Computations: International Journal for Computer-Aided Engineering and Software
Volume:
2.
Keywords: Rock; Fracture; Contact model; Particle model; Discrete element
Info
A barragem romana de Olisipo
Os romanos deixaram importantes contributos na área da Engenharia de Barragens, tanto nos aspectos relacionados com a concepção estrutural, como nos métodos construtivos e nos materiais utilizados. A barragem romana de contrafortes mais alta que se tem registo localiza-se em Belas, junto a Lisboa, e é conhecida como a Barragem de Olisipo. Apesar de se encontrar semidestruída e não desempenhar a função para a qual foi concebida, as suas ruínas constituem, ainda assim, um conjunto com interesse técnico e histórico. Este trabalho apresenta um estudo sobre as características geométricas e estruturais da Barragem de Olisipo. A análise estrutural foi realizada através do método do equilíbrio limite. Este estudo incidiu sobre duas secções transversais tipo da barragem, designadas por secção corrente e secção equivalente, esta última idealizada a partir da área de influência de um contraforte. Foram determinadas as linhas de pressões, as tensões verticais totais e efectivas na base da barragem e os factores de segurança em relação aos mecanismos globais de deslizamento e de derrubamento. O objectivo fundamental deste trabalho é divulgar e valorizar este importante património.
Ano: 2013
Autor(es): Bretas, E. M.; Lemos, J. V.; Lourenço, P.
Revista: Construção Magazine
Editor: Construção Magazine
Volume:
56.
Keywords: Estruturas históricas; Barragens de alvenaria
Info
Discontinuum modelling in rock engineering
The evolution of numerical modelling in rock mechanics has made possible a more realistic representation of thebehaviour of rock masses, and a more reliable prediction of the response of rock engineering structures. Discontinuum modelling techniques, namely the discrete element method, based on the explicit representation of the rock mass discontinuous structure, have progressively acquired a broader role. In this lecture, the essential concepts and main features of these numerical techniques are discussed, with reference to their historical development. The use of these idealizations is exemplified by two areas in which they proved very effective. On one hand, the analysis of practical rock engineering problems, intended, for example, for safety assessment or monitoring interpretation. This type of application is illustrated herein by dam foundation analyses based on deformable block models.Asecond level of discontinuum modelling involves research aimed at the understanding of the fundamental behaviour of rock and rock masses. An example of this approach is the analysis of fracture phenomena with particle models, primarily of laboratory specimens, but being extended to larger scales. Critical issues identified in the effective application of these modelling tools are examined, as well as some foreseeable evolution trends.
Ano: 2013
Autor(es): Lemos, J. V.
Revista: SOILS and ROCKS
Editor: ABMS
Volume:
36(2).
Keywords: Dam foundations; Discrete elements; Numerical modelling; Rock mechanics
Info
Hydromechanical analysis of masonry gravity dams and their foundations
A numerical model for the hydromechanicalanalysis of masonry dams based on the discrete elementmethod is presented. The dam and the rock foundation arerepresented as block assemblies, and a coupled flow-stressanalysis is performed in an integrated manner for the entiresystem. Complex block shapes may be obtained byassembling elementary blocks into macroblocks, allowingthe application of the model to situations ranging fromequivalent continuum to fully discontinuum analysis.A contact formulation was developed based on an accurateedge
Ano: 2013
Número Páginas:
327-339pp.
Autor(es): Bretas, E. M.; Lemos, J. V.; Lourenço, P.
Revista: Rock Mech Rock Eng
Editor: Springer
Volume:
46.
Keywords: Hydromechanical analysis; Discrete elements; Masonry dams
|
Comunicações
Info
Rock joint shear tests. Methods, results and relevance for design
Recent regulations introduced a limit state approach to geotechnical design by using representative values of the actions and of the strength parameters, partial safety factors that affect them, and by including safety margins in the calculation models. Moreover, Eurocode 7 stresses the importance of making use of test results for establishing ground parameters, and so rock joint shear tests are set to play a relevant role in the assessment of the shear strength required in the design of important projects, such as concrete dams, large bridge foundations, slopes, or underground excavations. In this keynote, joint shear tests are described, along with a presentation of their equipments and different procedures. Test results and calculations for the assessment of relevant shear strength parameters are illustrated, and several topics regarding sampling and variability are discussed. Opportunity is taken to present a practical apparatus allowing to perform simple shear tests (push tests) under very low normal stresses with advantages over tilt or pull tests.
Ano: 2012
Número Páginas:
14p.
Autor(es): Muralha, J.
Keywords: Shear tests; Shear strength; Rock joint
Info
The reshaping during construction of the right abutment foundation of the New Alto Ceira Dam in Portugal
The New Alto Ceira Dam is a 41 m high and 133 m long at the crest concrete arch dam, located in the middle zone of Portugal. The objective of the dam
Ano: 2012
Número Páginas:
16 p.
Autor(es): Cunha, J.; Leitão, N. S.; Neves, J.; Antunes , N.
Keywords: Discrete elements; Numericla models; Rock foundation discontinuities; Arch dam
Info
Análise estrutural das obras de reabilitação da barragem de Bhandardara, Índia
Este documento descreve a rotura ocorrida na barragem indiana de Bhandardara,constituída por alvenaria, cujas causas estão relacionadas com problemas defissuração e acção da pressão da água no seu interior. O documento apresentatambém uma avaliação da segurança estrutural, com base em modelos numéricoselaborados através do Método dos Elementos Discretos, das obras de reabilitaçãopreconizadas que incluíram a utilização de ancoragens e pregagens.
Ano: 2011
Número Páginas:
T 103
Autor(es): Bretas, E. M.; Lemos, J. V.; Leger , P.; Lourenço, P.
Editor: COMITÊ BRASILEIRO DE BARRAGENS
Info
Discontinuum models for dam foundation failure analysis
N/A
Ano: 2011
Número Páginas:
8.
Autor(es): Lemos, J. V.
Editor: isrm
Info
Ensaios de vibração forçada para a caracterização das propriedades dinâmicas de barragens de betão
Ao longo dos últimos anos, têm sido desenvolvidos no LNEC técnicas para a realização deensaios de vibração em barragens de betão inseridos em metodologias de determinação daspropriedades dinâmicas destas obras. Inicialmente o objectivo destes ensaios era apenascontribuir para a avaliação da segurança das barragens de betão relativamente a acçõessísmicas. Mais recentemente, estes ensaios são também encarados como ensaios de carga derealização fácil e económica. De facto, as frequências naturais de cada estrutura dependemdas suas características, em particular, da sua deformabilidade, pelo que a realização destetipo de ensaio, em épocas distintas da vida útil das obras, permite determinar a evolução notempo da sua deformabilidade média e, eventualmente, detectar e quantificar a evolução deum processo de deterioração dos materiais.O ensaio de vibração forçada consiste na aplicação a uma estrutura de uma força com umavariação no tempo sinusoidal perfeitamente conhecida, materializada através de um vibradorde massa excêntrica. Esta acção provoca nas estruturas, em regra, um movimentovibratório forçado com a mesma frequência de variação no tempo da força aplicada (emboradesfasada) e com amplitudes que, para além da intensidade da força, dependem da suafrequência de aplicação e das frequências naturais da estrutura. Tirando partido do facto de severificar um significativo aumento da amplitude da resposta da estrutura quando a frequênciada acção se encontra na vizinhança das frequências naturais da estrutura, a medição daresposta da estrutura sob a acção de uma força com uma variação sinusoidal no tempo,aplicada com diversas frequências, permite identificar as frequências naturais da estrutura(aquelas para as quais se verificarão os picos de amplitude), bem como o respectivoamortecimento.
Ano: 2011
Número Páginas:
2.
Autor(es): Gomes, J. P.
Keywords: Deterioração do betao das barragens; Comportamento dinamico de barragens
Info
Environmental thermal actions - thermal analysis of Alto-Lindoso dam
In this work the finite element implementation of thermal analysis of concrete dams is described. The different temperature boundary conditions are properly represented. For the exposed face of the dam both convection/radiation heat transfer and solar radiation are implemented. The model is validated by calculating the response of a concrete arch dam and comparing the results of the monitoring system values.
Ano: 2011
Número Páginas:
11p.
Autor(es): Leitão, N. S.
Editor: CI-Premier Pte Ltd
Keywords: Environmental actions; Heat transfer; Finite element method; Concrete dams
Info
Hydro-mechanical characterization of Jurassic marls to study load degradation
Mechanical properties of soft rocks such as marls are strongly affected by suction, directly connected with wetting and dryingcycles resulting from climate actions. An extensive experimental programme was carried out in order to characterize the physicaland mechanical properties of Abadia marls, used in the A10 motorway near Arruda dos Vinhos (Portugal). The experimentalprogramme consisted of laboratory unconfined compression and Brazilian splitting tests, oedometric tests and triaxial tests, all ofthem performed under controlled suction.
Ano: 2011
Número Páginas:
647-652pp.
Autor(es): Muralha, J.; Caldeira, L.; Cardoso, R.; Maranha das Neves, E.
Editor: IOS Press
Keywords: Suction; Soft rocks
Info
Interpretation of rock mass deformability measurements using large flat jack tests
Large flat jack tests are used to assess rock mass deformability in the design stages of large projects. This testconsists in cutting a thin slot in the rock mass in which a flat jack with large dimensions is inserted; oil pressure inside thejack loads the slot walls while the rock mass deformation is measured by displacement gauges located inside the jack and atthe surface. The main difficulty regarding interpretation of large flat jack tests has to do with the effect of the tension crackthat may develop in the rock mass during the tests. A three-dimensional numerical model was developed for theinterpretation of large flat jack test results. The model was used to establish the relations between the in situ stressperpendicular to the slots, the rock mass tensile strength, the applied pressures and the crack depth.
Ano: 2011
Número Páginas:
6.
Autor(es): Figueiredo, B.; Lamas, L.; Muralha, J.
Editor: Taylor & Francis Group
Keywords: Site characterization; Rock properties; Numerical modeling; Field measurements
Info
Numerical simulation of a large flat jack test with cycling loading
Large flat jack tests are one of the field techniques used to assess rock mass deformability. The paper introduces a methodology for interpretation of these tests. A three-dimensional numerical model was developed, which simulates the test with the actually applied loading and allows assessing the evolution of the displacements in the location of the transducers. The depth of the tension crack that may develop in the rock mass during the test is assessed at each test stage. The paper presents the calculations that were performed for simulation of an actual large flat jack test protocol with four loading and unloading cycles.
Ano: 2011
Número Páginas:
11.
Autor(es): Figueiredo, B.; Lamas, L.; Muralha, J.
Keywords: Numerical modelling; Field tests; Deformability; Rock mechanics
Info
Recent developments and future trends in distinct element methods
ABSTRACT: The Distinct Element Method was proposed by Cundall in 1971 as a numerical technique to study rock mechanics problems, based on the representation of a rock mass as a system of blocks or particles. In recent years, the concepts underlying such
Ano: 2011
Número Páginas:
12.
Autor(es): Lemos, J. V.
Editor: icadd
Keywords: Numerical modelling
|
Livros
Info
Computational modeling of masonry structures using the discrete element method
Masonry is a combination of units such as stones, bricks or blocks usually laid in a cementitious or limemortar. It is probably the oldest material used in construction and has proven to be both simple to buildand durable. Over the years, existing masonry constructions have inevitably suffered damage with time.Earthquakes, soil settlements, material degradation and lack of maintenance are the main reasons forthat. Careful and periodic assessment of such structures is necessary in order to evaluate their structuralcapacity and safety levels. However, performing the structural analysis of masonry construction is notan easy task. A review is presented of the main models based on the discrete element method and the available related numerical techniques that have been proposed for the analysis of masonry. The essential assumptions adopted by these models and numerical implementation issues are discussed. Differences between available models are illustrated by applications to various masonry problems including static and dynamic analysis of masonry arch bridges, walls, vaults, domes and ancient colonnades.This book is composed of 17 chapters authored/co-authored by 25 outstanding researchers from 11countries (Canada, France, Greece, Hungary, Iran,Italy, Mexico, Norway, Portugal, UK, USA), whichwere reviewed by 60 referees.
Ano: 2016
Número Páginas:
505p.
Autor(es): Sarhosis, V.; Bagi, K.; Lemos, J. V.; Milani, G.
Editor: IGI Global
Keywords: Elementos discretos; Modelação numérica; Alvenaria
Info
Contribuição de Manuel Rocha para a mecânica das rochas e as fundações de barragens
N/A
Ano: 2013
Número Páginas:
296pp.
Autor(es): Lemos, J. V.; Lamas, L.
Editor: LNEC
Keywords: Investigação científica e técnica; Barragem de betão; Fundação rochosa; Fundação de barragem; Mecânica das rochas; Pt
|
Capítulos de Livros
Info
Chapter 5 Discrete Element Modeling
This chapter consists of two parts. First a general overview is given: the exact definition of the Discrete Element Method is provided, and the main types of existing models are introduced; then the theoretical fundaments of the most important approaches available today for masonry analysis are given. The second part of the chapter focuses on 3DEC, the most widespread commercial DEM code for masonry analysis. This second part begins with a theoretical overview. Application issues for masonry structures are then considered (block material behaviour, contact representation, structural elements like cables or bars etc.). Among the practical examples arches, barrel vaults, walls, coloumns and complete structures (like houses) are presented, including the issues of quasi-static versus dynamic analysis and of block fracture as well. The readers can find helpful advice on how to simulate their own problems most effectively.
Ano: 2023
Autor(es): Lemos, J. V.; Bagi, K.
Revista: Discrete Computational Mechanics of Masonry Structures
Editor: Springer
Keywords: Masonry models
Info
Discrete Element Modelling of Masonry Arch Bridges, Arches and Vaults
N/A
Ano: 2022
Autor(es): Lemos, J. V.; Gobbin, F.; Forgacs, T.; Sarhosis, V.
Revista: From Corbel Arches to Double Curvature Vaults.
Editor: Springer
Keywords: numerical modelling; masonry
Info
DEM modelling of the non-linear static and dynamic response of masonry structures
Discrete element models have become a major tool for masonry analysis, allowing a suitable representation of its discontinuous nature and marked nonlinear behaviour. The chapter reviews the fundamental assumptions of the main DEM formulations available. It focuses more specifically on the widely used UDEC and 3DEC codes, explaining their relation with the other approaches, and the most relevant issues arising in their application to masonry. Applications to the main types of structures are reviewed, considering both static and dynamic analyses. Recent research providing comparisons of the numerical models with experimental and field data is particularly covered. The discussion of the different examples is aimed at clarifying the key capabilities of DEM and demonstrating the most effective ways of using it in a variety of masonry analysis situations.
Ano: 2019
Número Páginas:
469-501pp.
Autor(es): Sarhosis, V.; Lemos, J. V.; Bagi, K.
Revista: Numerical Modeling of Masonry and Historical Structures - From Theory to Application
Editor: Elsevier
Keywords: DEM; Masonry structures
Info
Seismic and Structural Health Monitoring of Dams in Portugal
This chapter is focused on the Portuguese experience on the developmentand exploration of systems for continuously monitoring dam vibrations, usingaccelerometers. The pioneer system for seismic and structural health monitoring(SSHM) installed in Cabril dam (the highest Portuguese arch dam: 132 m high) isdescribed in detail. The design of this system was the result of a long-term LNECresearch program, still ongoing. These monitoring systems should include softwaredeveloped to automatically perform the analysis of collected data, including theautomatic comparison with numerical results from 3DFE models. In view of thegood results obtained with the system in operation in Cabril dam since 2008, similarsystems have been installed in other large dams in Portugal, particularly in recentlybuilt dams. Finally, Baixo Sabor dam is presented as an example of a new Portuguesedam with a complete SSHM system, in operation since 2015. Themain experimentalresults obtained for both dams are shown, namely the evolution of natural frequenciesover time, mode shapes and the measured seismic response to earthquake events.
Ano: 2019
Número Páginas:
87-113pp..
Autor(es): Oliveira, S.; Alegre, A.
Revista: Seismic Structural Health Monitoring - From Theory to Successful Applications
Editor: Springer
Keywords: Modal identification · Concrete dams · Ambient and seismic vibrations
|
Teses de Doutoramento
Info
Análise experimental de cenários de rotura em fundações de barragens de betão
Para verificação do cumprimento das exigências de segurança das barragens,tanto relativamente à funcionalidade (cenários correntes), como em relação àsegurança ao colapso (cenários de rotura), é essencial utilizar modelos de simulação oude interpretação (no caso de obras existentes) do seu comportamento. Estes modelossão idealizações (simplificações) da realidade, tanto no que diz respeito às acções(modelos das acções), como no que respeita à componente estrutural (modelos estruturais).A solução destes modelos, através de adequados métodos de análise, quantificaparâmetros da resposta das estruturas que permitem avaliar a sua segurança, utilizandocritérios de segurança previamente definidos.A validação destes modelos pode ser feita, no caso de cenários correntes,através da sua comparação com os resultados da observação do comportamento debarragens. No caso de cenários de rotura, não existe muita experiência de comparaçãodestes resultados com situações reais: é pequeno o número de acidentes ocorrido e,mesmo nestes, o volume de informação é reduzido. Desta forma, o recurso a métodosexperimentais, para o estudo de cenários de rotura, tem uma importância acrescida.Assim o principal objectivo deste trabalho é contribuir para melhorar a capacidade deavaliação da segurança de barragens de betão envolvendo cenários de rotura pela fundação.Neste trabalho desenvolveram-se dois ensaios experimentais em modelosfísicos: um primeiro envolvendo uma barragem abóbada, para o estudo de cenários derotura da fundação para acções estáticas; e um segundo de uma barragem gravidadeensaiado em mesa sísmica, com vista a estudar a rotura pela fundação para acçõesdinâmicas.A previsão e interpretação dos ensaios foram efectuadas com modelosmatemáticos adequados, que permitiram a sua validação e posterior utilização no estudode outros cenários.
Ano: 2009
Autor(es): Gomes, J. P.
Keywords: Método dos elementos discretos; Método dos elementos finitos; Modelos numéricos; Mesa sísmica; Análise dimensional; Modelos físicos; Análise até à rotura; Controlo da segurança de barragens; Barragens de betão
|
|
Relatórios
Info
DEMRock6m
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto DEMRock6m do P2I/LNEC 2013-2020. Os resultados da atividade desenvolvida são analisados e avaliados em face dos objetivos inicialmente previstos.
Ano: 2024
Autor(es): Muralha, J.; Lemos, J. V.; Lamas, L.
Keywords: Estruturas de alvenaria; Barragens de betão; DEMRock6m; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
MEBAD
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto MEBAD do P2I/LNEC 2013-2020, no período 2016-2023. Os resultados da atividade são analisados e avaliados, em face dos objetivos previstos.
Ano: 2023
Autor(es): Lemos, J. V.; Batista, A. L.; Gomes, J. P.
Keywords: Estruturas de alvenaria; Barragens de betão; MEBAD; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
RockGeoStat
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto RockGeoStat do P2I/LNEC 2013-2020. Os resultados da atividade desenvolvida são analisados e avaliados em face dos objetivos inicialmente previstos.
Ano: 2023
Autor(es): Lamas, L.; Muralha, J.; Pereira, R.
Keywords: Modelação numérica; Heterogeneidade; Mecânica das rochas; RockGeoStat
Info
Development of DamDamage3D1.0 - A MATLAB program for non-linear analysis of arch dams using a damage model
The main goal of this report is to present DamDamage3D1.0, a 3D finite element-based program for non-linear static analysis of arch dams, developed using MATLAB. The non-linear simulations are performed using a damage law and an iterative numerical method based on the stress-transfer technique, considering the redistribution of unbalanced forces in each iteration due to material damage. The concrete
Ano: 2019
Autor(es): Alegre, A.; Oliveira, S.
Keywords: Non-linear behaviour; Cabril dam; Compression damage; Tension damage; DamDamage3D1.0; Damage model; Concrete strength decrease scenario; Concrete arch dams; MATLAB 3DFEM program
Info
Development of DamDamage3D1.0. A MATLAB program for non-linear analysis of arch dams using a damage model
The main goal of this report is to present DamDamage3D1.0, a 3D finite element-based program for non-linear static analysis of arch dams, developed using MATLAB. The non-linear simulations are performed using a damage law and an iterative numerical method based on the stress-transfer technique, considering the redistribution of unbalanced forces in each iteration due to material damage. The concrete
Ano: 2019
Autor(es): Alegre, A.; Oliveira, S.
Editor: LNEC
Keywords: DamDamage3D1.0 / MATLAB 3DFEM program / Concrete arch dams / Cabril dam / Non-linear behaviour / Concrete strength decrease scenario / Damage model / Tension damage / Compression damage
Info
Development of GDams2D 1.0 - A MATLAB code for structural analysis of gravity dams using Lagrangian finite elements with 9 nodes
In this work we present the version 1.0 of the GDams2D 1.0 program developed for 2D analysis of gravity dams using the finite element method. This initial version of the program is prepared to analyze the structural behavior of gravity dams for static loads, considering linear-elastic behavior, and using Lagrange finite elements of 4 sides, with 9 nodal points. The GDams2D 1.0 program, developed in MATLAB, includes a module for automatic generation of meshes with a great level of refinement (generated from coarse meshes of quadrilaterals, with 4 nodal points at the vertices) and is designed for easy adaptation to non-linear analyzes, using stress-transfer modules such as those recently developed for the DamSlide3D and DamDamage3D programs. After a brief reference to the fundamentals of solid mechanics and to the simplified hypotheses of plane elasticity, the Fundamentals of the Finite Element Method (FEM) are presented, referring in particular the formulation of the four-node, linear and isoparametric, finite element (FE4nos), with two translation d.o.f per node, and the quadrangular FEs of 9 nodes (FE9nos) used in GDams2D 1.0. Based on some examples of application to simple 2D structures whose response is knownanalytically, the advantages of FEs are emphasized in relation to FE4nos and the verification and operability of GDams2D 1.0 is made using various discretizations. Finally, the case of a gravity dam (25 m high) is presented. The dam
Ano: 2019
Autor(es): Rodrigues, M.; Oliveira, S.
Keywords: Solid mechanics; p-refinement and h-refinement; Gravity dams; 2D Lagrangian finite elements; FEM convergence; Linear-elastic behavior
Info
Structural analysis of gravity dams considering non-linear behavior in the dam-foundation interface - Development of a 3DFE code using MATLAB: DamSlide3D
The main objective of this work is the development and presentation of a three-dimensional finite element program, DamSlide3D, to study the behavior of gravity dams for scenarios of sliding through the dam-foundation interface. The DamSlide3D, developed using MATLAB, includes cube-type finite elements with 20 nodal points ("serendipity") and finite interface elements with 16 nodal points (joint elements). Initially, we present the fundamental equations of Solid Mechanics, referring to the main simplified hypotheses considered in the computationally implemented formulation, which is presented mathematically as a problem of boundary values using a displacement formulation. For the structure body and for the foundation, the hypothesis of isotropic materials with linear elastic behavior is assumed and for the interfaces the hypothesis of non-linear behavior is considered using the Mohr- Coulomb criterion. The DamSlide3D input data is provided in an excel file and includes structure geometry data, material properties, support conditions and load parameters. As output, the program graphically displays the stress field (principal stresses) and the displacement field (deformed structure). The program was verified throughout three numerical tests with known theoretical solutions. In these tests a simple structure was used, composed by a column discretized in 3DFE. At the contact surface between the column and the base (horizontal surface) it was considered an interface discretized using joint finite elements. A plane surface that crosses the column with a given slope is also considered, discretized using the same type of joint finite elements. In the first test, the field of elastic stresses at the base, due to self-weight (SW) and hydrostatic pressure (HP), was compared with the theoretical results. In the second test the nonlinear column response was studied for different values of thefriction angle at the inclined interface (in this test the structure is only submitted to SW). In the third test, for the main SW + HP loads, the stability of the column is studied for a variation of the friction angle, and for a variation of the water level. In these three numerical tests the results were always consistent with the theoretical solutions. Finally, as an example of application, a gravity dam structural behavior was analyzed considering the non-linear behavior in the dam-foundation interface. The dam was subjected to self-weight and hydrostatic pressure. A parametric study was developed in order to study the dam stability for differentvalues of water level and friction angle.
Ano: 2019
Autor(es): Rodrigues, M.; Oliveira, S.
Keywords: Dam-foundation interface friction angle; Gravity dam; Mohr-Coulomb failure criterion; Stress-transfer; Interface non-linear behavior; Joint finite elements; 3D solid finite elements
Info
CoMatFail
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto CoMatFail até ao final de 2017. É feita a apreciação da atividade desenvolvida, nomeadamente quanto ao grau de cumprimento do plano de trabalhos, bem como dos objetivos específicos e dos indicadores de desempenho propostos na ficha de projeto. São ainda referidas as aplicações dos resultados da investigação em trabalhos contratados ao LNEC e as candidaturas a financiamento externo desenvolvidas no âmbito do projeto. Inclui-se em anexo a ficha do projeto atualizada, que contempla a revisão do plano de trabalhos.
Ano: 2018
Autor(es): Dias, I. M.; Lemos, J. V.; Mata, J.
Keywords: Análise até à rotura; Controlo de segurança; CoMatFail; Barragens de betão; Modelação numérica; Fratura material
Info
DEMRock6m
Neste relatório apresenta-se de forma sucinta a descrição da atividade de investigação realizada no âmbito do projeto DEMRock6m no período 2016-2017. Os resultados da atividade são analisados e avaliados em face dos objetivos inicialmente previstos, sendo proposta uma revisão do plano de atividades para os próximos três anos.
Ano: 2018
Autor(es): Muralha, J.; Lemos, J. V.; Espada, M.; Lamas, L.
Keywords: Estruturas de alvenaria; Barragens de betão; DEMRock6m; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
RockGeoStat
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto RockGeoStat no período 2016-2017. Os resultados da atividade são analisados e avaliados em face dos objetivos inicialmente previstos, sendo proposto um prolongamento do projeto até ao final de 2018.
Ano: 2018
Autor(es): Lamas, L.; Muralha, J.; Espada, M.
Keywords: Modelação numérica; Heterogeneidade; Mecânica das rochas; RockGeoStat
|
Informações Científicas e Técnicas
Info
Identification of transversely isotropic parameters in overcored rock specimens - A back analysis approach
This document presents a back analysis procedure for identification of the elastic parameters of transversely isotropic rock cores, containing an overcoring triaxial strain probe, from the strains measured during a biaxial test. A three-dimensional finite element model was developed to simulate the biaxial test on the overcored rock specimen and to compute the strains at the location of the strain gauges. Different optimisation algorithms were tested and the most suitable one was selected. The back analysis procedure was tested for identification of the five elastic parameters and the two orientation angles that characterise a transversely isotropic rock core. In spite that, with the developed methodology, convergence was reached and all those parameters could be identified, sensitivity analyses demonstrated that the results obtained were not stable and therefore they were not reliable. By introducing constrains based on common practice and previous experience, a stable and robust methodology was achieved: the three elastic parameters, E1, E2 and ?2, are reliably identified using the value of G2 calculated with Saint-Venants expression and a fixed value of ?1, while the orientation parameters are obtained from observation of overcored rock. Analysis of the results shows that application of this methodology represents an enormous step forward when compared with the traditional use of isotropy. Besides, the methodology is general and can also be used with other types of overcoring equipment. The five elastic parameters and the two orientation angles obtained can then be used, together with the overcoring strains, to compute the complete in situ state of stress.
Ano: 2018
Autor(es): Espada, M.; Lamas, L.
Keywords: Transversely isotropic rock; Numerical method; Rock test; Optimisation; Triaxial strain probe; In situ stress; Overcoring; Biaxial test
Info
Stability analysis of excavation slopes of Baihetan arch dam foundation - Reliability analysis by application of the response surface method
This document presents the work developed by the PhD student Margarida Espada in the scope of the course unit Risk Analysis in Geotechnical Works of the Doctoral Program in Civil Engineering of the Faculty of Engineering of the University of Porto (FEUP). This work presents a reliability analysis, using the response surface method (RSM), for the case study of the left bank excavation slopes of the Baihetan arch dam foundation, which is one of the case studies of Margarida Espada's PhD thesis. The aim was to approximate an implicit limit state function by computing safety factors, using a discrete element model of the Baihetan left bank developed in 3DEC software, where the shear strength parameters of two important rock discontinuities were considered as random variables. The probability of failure was then obtained through an iterative process, using approximation methods. This work presents the 3DEC model developed to analyse the stability conditions in the Baihetan left bank and the results of the reliability analysis.
Ano: 2018
Autor(es): Espada, M.
Keywords: Dam foundation; Baihetan dam; Discrete element method; Reliability; Slopes stability
Info
Contribuição para o problema da existência e suavidade da solução da equação de Navier- Stokes
O problema da solução das equações de Navier Stokes é abordado neste trabalhopropondo-se uma técnica de representação das incógnitas deslocamentos e pressõesvariáveis no espaço e no tempo em série de Delta de Dirac e suas derivadas no tempocujos coeficientes se determinam com base na solução de sistemas de equaçõesdiferenciais definidos no espaço (problema com três variáveis espaciais independentesque pode ser estudado pelo método de Monge).
Ano: 2011
Número Páginas:
12pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Equação de navier-stokes
Info
Elastodinâmica
Neste relatório apresentam-se as equações básicas da elastodinâmica linear, as soluçõesfundamentais e o teorema da representação no domínio de tempo e de frequência.Para movimentos finitos de casca formula-se o teorema dos trabalhos virtuais e a suaimplementação pelo método dos elementos finitos.
Ano: 2007
Número Páginas:
54pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Método dos elementos finitos; Elastodinâmica
Info
Modelação sísmica de barragens abóboda
Neste relatório apresentam-se os principais aspectos da modelação sísmica de barragensabóbada. Assim propõe-se: modelos numéricos de geração de sismos por uma falha; aforma como o sismo actua na barragem; modelos para estudar a influência da albufeirana vibração do conjunto; métodos para solução das equações do movimento; e novasformulações de elementos finitos para o problema estrutural.
Ano: 2005
Número Páginas:
72pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Método dos elementos finitos; Simulação numérica; Comportamento sísmico de estruturas; Comportamento de barragens; Barragem abóboda
Info
An experimental and numerical study for analysis of the hydromechanical behavior of the Alto Lindoso high pressure circuit
In pressure tunnels and shafts, in addition to the mechanical effect that excavation has on the rock mass and the disturbance that it introduces in the water flow, also the contained water can interact from the mechanical and hydraulic points of view with the rock mass. Seepage in fractured rock masses is dominated by the flow that takes place through the joints, and this is highly d(;pendent on their properties, namely aperture and roughness. Joint aperture, in tum, i::; very sensitive to stress changes. Special attention must therefore be paid to the joints in hydromechanical analyses. In this report are presented some studies that were carried out for the hydromechanical characterization of joints of the Alto Lindoso rock mass and numerical simulations of the hydromechanical behaviour of two selected sections of the high pressure circuit.
Ano: 1994
Autor(es): Lamas, L.
Keywords: Simulação numérica; Barragem de Alto Lindoso; Percolação no solo; Maciço rochoso; Comportamento hidromecânico; Interacção solo-água-estrutura; Circuito hidráulico
|
|
|