Publicações

O SAFEPORT-SINES é um sistema de previsão e alerta para a segurança da navegação em zonas portuárias, englobando situações de emergência associadas a navios em trânsito ou amarrados, devidas a condições meteo-oceanográficas extremas. O sistema fornece previsões com 3 dias de antecedência da agitação marítima, das condições de vento e de maré, assim como dos movimentos dos navios, identificando as situações que possam ter consequências gravosas nos navios em manobra ou amarrados dentro do porto. Os níveis de risco associados baseiam-se em critérios de segurança e de operacionalidade, nomeadamente nos movimentos do navio e nos esforços nos elementos de amarração. Neste trabalho apresenta-se o sistema SAFEPORT em termos do seu desenvolvimento e arquitetura, do fluxo e tratamento de dados e do funcionamento dos modelos numéricos utilizados. Apresenta-se ainda o funcionamento da plataforma web e da aplicação móvel onde é possível consultar os parâmetros relevantes para aferir os riscos referidos

SAFEPORT safety system aims at forecasting and alerting, on a regular basis, emergency situations regarding ships operation in port areas caused by extreme weather-oceanographic conditions. It uses forecasts provided offshore of the area under study of sea agitation, wind and tide. The characterization of the response of the free and moored ships at a berth is performed using the numerical package SWAMS. The system issue alerts, through danger levels associated with risk levels of exceedance of recommended values for movements and forces imposed on ship mooring systems. SAFEPORT can be adapted to any port. So far, it has been developed and adapted to three terminals of the port of Sines, where three different ships were simulated. This paper presents the developments made to date of the safety system, which includes tests performed in storm situations. The numerical models run every day, in real-time mode, in a computer cluster and the system provide forecast results for the next 72 hours. The results are disseminated on a web page and a mobile application in a variety of formats. It was concluded that the SAFEPORT safety system issued alerts according to the observed reality during the storm Dora. It has also been shown to be a computer tool for the optimization of ship mooring systems. The system is currently in testing and validation phase therefore, forecasts should be interpreted as indicative.

Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel

Docking of very large ships is a delicate procedure as the kinetic energy associated with large masses of the ship can result in high impact forces causing damages to the ship, the fenders and even the quay itself. The expected berthing loads are a key element in quay design. Fenders are usually rubbery flexible elements that turn the vessel

The To-SEAlert project (Fortes et al., 2021) aims to include a set of tools/methodologies into the Early Warning System HIDRALERTA (Poseiro, 2019, Fortes et al., 2020, Pinheiro et al., 2020) to make it more efficient, reliable and robust.

Marine fenders provide the necessary interface between berthing ships and berth structures (PIANC, 2002). Their absence can cause damage to either the quay or the ship or both the quay and the ship, endangering lives, and property. Due to the complex hydrodynamics around berthing ships, the characterization of the maximum force applied to an individual fender and the force distribution among a set of fenders is an essential factor in the design and safety of maritime structures and the fenders themselves, as well as for improving existing ones. This paper aims to describe a combining physical and numerical modelling of a ship impact on fenders, in order to improve the numerical modelling of this problem.Physical modelling represents a good practice in hydraulic studies, where a scale model is used to reproduce complex dynamic phenomena. However, the use of a sophisticated numerical model (or a package of numerical models) can provide a good means to evaluate the samecomplex physical processes and, in addition, to design and test a large number of alternatives in a short time span.Both types of models have their strengths and weaknesses (Gerritsen and Sutherland, 2011). Physical models provide a natural reproduction of complex non-linear physical phenomena, therefore they are well established and considered to be truthful. On the other hand, these models can be expensive and time consuming. In addition, one has to deal with the scale effect and measurement difficulties and errors are frequent. Numerical models in turn are very efficient to simulate rapidly many physical processes and the results can be easily extracted. On the other hand, to improve the reliability of their use in practice, it is necessary to calibrate several parameters through physical model measurements and field experiments. In order to take advantage of the potentiality of the two models emerged the composite modelling which is the integrated and balanced use of physical and numerical models (Gerritsen and Sutherland, 2011). This technique also costs but provides results with a better quality than those model techniques separately and increases the confidence in the use of numerical models.The physical modeling consists of a ship scaled model, whose impact on the fenders was performed in a wave basin. Various impact velocities and angles between the ship axis and the fenders alignment were used to represent possible collision conditions. The same conditions were reproduced by a numerical package. The numerical modeling was performed using MOORNAV (Santos, 1994), which estimates the ship motions and the forces exerted on the elements of the mooring system, namely mooring lines and fenders.

Esta comunicação diz respeito à fase de testes do sistema SAFEPORT, tendo-se avaliado o seu desempenho numa situação de tempestade. Trata-se de um sistema desenvolvido para a segurança da navegação do porto de Sines, e, mais concretamente, nos seus terminais de Granéis Líquidos, Multiusos e Contentores. Para estes terminais, simulou-se o impacto da tempestade Célia nos esforços nos cabos de amarração de um navio petroleiro, de um navio de carga geral e de um navio porta contentores, respetivamente. O sistema SAFEPORT demonstrou ser capaz de antecipar os efeitos nos navios amarrados dos estados de agitação associados à tempestade Célia.

The present project addresses a problem related to the erosion effects on a breakwater barrier due to waves which leads to its degradation and that may eventually lead to lack of functionality of the structure. In the present case, the breakwater acts as a physical barrier between the Atlantic Ocean and the cargo Harbour of Leixões, in Matosinhos, Portugal, justifying the needs of health monitoring of the barrier.To monitor this structure, with a length of roughly 700 m, the need of a fast data acquisition system led to the choice of imaging techniques which allow for a fast acquisition of a diversified data set. The images were acquired using a high-resolution camera attached to an unmanned aerial vehicle (UAV), enabling a faster and more automated procedure that leads to the systematization of the process, while being compatible with the difficult accessibility of the structure, which is surrounded by sea waves. Point clouds corresponding to the breakwater

Storms impacting sandy coastal areas produce hazard such as erosion as overwash, in turn, promote risk to life and property damage in occupied areas.

Methodologies to be used in numerical models based on Reynolds-averaged Navier

The H&R wave overtopping model, originally developed for sloping structures, is employed ina number of operational coastal flood forecasting and warning systems. This paper describesthe first step in a project to extend the model to encompass vertical structures. Use is made ofthe CLASH database for the purpose of checking whether it is appropriate to simplyextrapolate the existing formulae for the model

Esta comunicação analisa a aplicabilidade a estruturas marítimas verticais do modelo degalgamentos de Hedges & Reis (H&R), originalmente desenvolvido, calibrado e validado paraestruturas em talude (Hedges & Reis, 1998, 2004; Reis et al., 2008). Apresenta a comparaçãodos resultados deste modelo e de outras formulações empíricas (Pullen et al., 2007; Goda, 2008)com os dados existentes na base de dados do projeto europeu CLASH para estruturas marítimasverticais. Este estudo enquadra-se na extensão da aplicabilidade do modelo a estruturas verticais(Reis et al., 2013) e tem vindo a ser realizado por solicitação da Royal HaskoningDHV que, desde1998, tem desenvolvido sistemas de previsão e alerta de inundações nas Ilhas Britânicas,utilizando este modelo (Lane et al., 2008; Naysmith et al., 2013). Os resultados da aplicabilidadea estruturas verticais do modelo H&R existente são bastante animadores, sugerindo que a suacalibração e validação para estruturas verticais possa originar melhores estimativas dogalgamento.

Neste estudo apresenta-se uma metodologia de avaliação de riscos para estados limitesoperativos no projecto de emissários submarinos que considera: a natureza intrínseca daestrutura, a legislação ambiental Europeia em vigor, os agentes climáticos característicos dazona costeira e a previsão do comportamento da pluma a longo-prazo.Pretende-se ainda identificar alguns padrões principais do comportamento da pluma e a suarelação com os agentes forçadores locais: vento e maré. Esses padrões são obtidos para aregião de Albufeira, onde se encontra o emissário de Vale de Faro, utilizando o método dasfunções ortogonais empíricas. A probabilidade de falha operativa ou paragem é considerada nodimensionamento probabilístico da estrutura.Com o presente estudo pretende-se estabelecer uma metodologia consistente para aoptimização e gestão de riscos no projecto de emissários submarinos com base nasRecomendações Espanholas para Estruturas Marítimas, ROM, actualmente de aplicaçãoessencialmente a portos e estruturas costeiras (Puertos del Estado, 2002). Esta metodologiapermite avaliar a segurança e operatividade de emissários submarinos e será parte integranteda ferramenta, em desenvolvimento, para a optimização e gestão de riscos nos projectos deemissários submarinos.

O conhecimento dos esforços resultantes da interacção de uma onda com um quebra-marmisto torna-se essencial no dimensionamento destas estruturas. No presente trabalho, omodelo numérico SPHyCE, baseado numa metodologia de tipo SPH - Smoothed ParticleHydrodynamics, é utilizado para o cálculo das forças num quebra-mar misto. Para analisar aevolução da força de impacto, foram consideradas várias condições de profundidade no pé daestrutura e de altura de onda incidente abrangendo diferentes regimes de força.A comparação dos resultados do modelo numérico com os das formulações empíricas permitiuverificar que as forças previstas são semelhantes para os casos de regime de ondaparcialmente estacionária. No entanto, para o regime de força de impacto, existem diferençasque se devem a vários factores: i) a rebentação não ocorre sempre da forma prevista nasformulações empíricas; ii) no caso da rebentação com ar aprisionado, cuja influência no valordas forças é relevante, o modelo numérico atinge a seu limite de aplicação, pois não integra oar.

This work is part of the DESTAQ project (Development of advanced techniques to measure thevelocities and study the interaction between detached breakwaters and harbour structures)and aims to analyse the hydrodynamic behaviour of a detached structure as a protectionelement of a main rubble mound breakwater using laboratory tools and techniques.The hydrodynamic analysis that is presented includes image processing tools, and the use ofthe numerical model IH-2VOF. A comparison between the results obtained with bothtechniques is made.

N/A

O modelo numérico SPHyCE, baseado nas equações de Navier-Stokes na forma Lagrangianae numa metodologia de tipo SPH - Smoothed Particle Hydrodynamics, tem sido desenvolvidono LNEC desde 2007. Este modelo, inspirado no código SPHysics (Monaghan, 1994), integravárias opções para aplicações específicas à engenharia costeira e foi objecto de numerosasanálises de sensibilidades com vários parâmetros, estudos de convergência com a resolução evalidações com dados de ensaios experimentais realizados nas instalações do LNEC. Estesestudos foram realizados à escala reduzida dos modelos físicos testados para validação domodelo numérico. No entanto, o modelo, na sua versão actual, não foi ainda aplicado à escalado protótipo.No presente trabalho o modelo numérico SPHyCE é aplicado ao molhe Oeste do Porto deAlbufeira, no Algarve. Esta primeira aplicação tem dois objectivos:- Analisar o comportamento do modelo numérico quando aplicado a um quebra-mar à escalareal;- Aplicar uma metodologia de acoplamento entre o modelo de propagação Bouss-2D, utilizadopara propagar a onda incidente do largo até às proximidades da estrutura, e o modeloSPHyCE.Esta aplicação integra-se no projecto SPACE

Embora os procedimentos para o projeto e operação de ensaios com modelo físico reduzido deestruturas marítimas estejam já consolidados há muito tempo, continuam a existir apossibilidade e a necessidade de aperfeiçoamento de procedimentos relacionados com aexploração desta fonte de informação sobre a resposta destas estruturas à agitação marítimanelas incidente.No presente trabalho, descrevem-se metodologias recentes, implementadas no LNEC, paramelhorar os procedimentos de caracterização da envolvente do manto protetor dequebra-mares de taludes - dando-lhes um caráter mais quantitativo

A set of procedures to evaluate the time series of the diffraction forces on a moored ship insidea harbor basin is presented. Nonlinear wave propagation is obtained using a Boussinesq finiteelement numerical model, BOUSS-WMH. Determination of hydrodynamic forces acting on theship is achieved using a modified version of the WAMIT model. Finally, time series of the waveforces on the ship and of the inherent moored ship motions are obtained using BAS numericalmodel. The main focuses of this work are: the coupling of these three models and themodification of the method used in WAMIT to determine diffraction forces. Some simple andpractical applications of this procedure are presented as well.

Sea waves inside harbors can affect scheduled port operations. Hence it isimportant to correctly predict and characterize the wave field inside ports and to describe themovements of the ship and forces acting upon it. A classical approach is to assume that shipwaveinteraction is linear, [1]. Then it is possible to decompose it in the so-called radiationand diffraction problems. Numerical models that solve such problems have been developedand used by the offshore industry for quite a while, [2], to study the interaction of sea-waveswith floating objects. However, these models cannot be used to solve the diffraction problemof ships inside harbor basins where nearby reflecting boundaries and shallow depths createvery complex nonlinear wave fields.A new set of procedures using coupled models is proposed in this work. First, a Boussinesqtypefinite element wave propagation model is used to determine the wave field in thenumerical domain containing the harbor. Then the velocity potentials are evaluated at theship

N/A

N/A

N/A

N/A

N/A

C2IMPRESS is a multi-disciplinary project which aims to enhance understanding and public awareness on multi-hazard risk, based on innovative models, methods, frameworks, tools and technologies to develop decision-making platforms with a fine-grained spatio-temporal data to better assess impacts, vulnerability and resilience on natural hazards. This Report is the Deliverable 1.1 and belongs to Work Package 1, which is mainly addressed to identify the past climate and physical processes that underlie natural disaster events and their consequences

A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project

The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.

According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.

This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.

Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled

The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled

This deliverable is related to task 8.2

Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.

The project LIFEGARACHICO (LIFE20 CCA/ES/001641) proposes the creation of an effective flexible adaptation framework for the coastal unicipalities of Macaronesia, making specific local interventions to increase their resilience against extreme coastal events resulting from climate change. Social surveys were applied in Praia da Vitória, Terceira, Azores, to understand the civilians perception of coastal flooding events.

The project LIFE-GARACHICO (LIFE20 CCA/ES/001641) proposes the creation of an effective flexible adaptation framework for the coastal municipalities of Macaronesia, making specific local interventions to increase their resilience against extreme coastal events resulting from climate change. Social surveys were applied in both localities in order to understand the civilians perception of coastal flooding events

Realização de ensaios em modelo físico reduzido 3D para a avaliação da estabilidade do quebra-mar destacado do Porto Inlgês, Maio, Cabo-Verde

N/A

Adverse sea conditions can cause emergency situations associated to wave overtopping, which endanger the safety of people and goods, with negative impacts for society, the economy and the environment. Therefore, a methodology to assess the overtopping risk in port and coastal areas is essential for a proper planning and management of these areas.The Portuguese National Laboratory for Civil Engineering (LNEC) has been developing the HIDRALERTA system, an integrated decision-support tool for port and coastal management, which focus in preventing and supporting the management of emergency situations and the long-term planning of interventions in the study areas. It enables the user to calculate the risk for various port and coastal activities, starting with the characterization of sea-waves, wind field and tide levels at the study regions.HIDRALERTA was already tested at different places in Portugal: Costa da Caparica beach, in Almada, and port of Praia da Vitória, in the Azores. However, in both cases, the evaluation of wave overtopping / flooding consequences was carried out using a quite simple approach. In fact, such consequences were assessed only at a global and qualitative level, based on information provided by the responsible authorities.This paper aims at testing a quantitative methodology to evaluate overtopping consequences: the Analytic Network Process (ANP). This methodology was proposed to solve complex decision-making problems and its objective is to calculate the priorities among decision elements which will define their final weights on the consequences. The ANP approach can produce interdependencies between criteria and compute the respective weight of each criterion. Such a network model with dependence and feedback improves the priorities derived from judgements and makes prediction more accurate. So, the ANP allows comparison among clusters of elements. Furthermore, in this methodology we take into account the impacts of alternatives on the importance of criteria, by normalizing the comparison matrix. Thus, the given alternatives can influence the ranking of criteria.Application of the ANP methodology to the case study of Praia da Vitória port is presented and a consequences level map is obtained.

Apresenta-se um novo sistema de alerta para navios amarrados em portos que se encontra em desenvolvimento no Laboratório Nacional de Engenharia Civil. O sistema SWAMS_ALERTA é um sistema de previsão e alerta baseado na avaliação do risco associado ao comportamento de navios amarrados em zonas portuárias.Os riscos associados a navios amarrados decorrem de movimentos excessivos, quer no plano horizontal, quer no plano vertical. Estes movimentos podem condicionar as atividades portuárias, nomeadamente cargas e descargas, mas em casos extremos podem levar à ocorrência de situações de emergência, tais como rotura de cabos, rotura de cabeços de amarração ou até colisões com o cais. As consequências deste tipo de situações envolvem sempre grandes prejuízos materiais e por vezes humanos.O sistema SWAMS_ALERTA utiliza as medições e previsões de agitação marítima para a determinação dos seus efeitos em termos de movimentos nos seis graus de liberdade e forças nas amarras e defensas quando o navio se encontra estacionado no cais. Para tal, o sistema recorre a uma série de modelos numéricos, interligados entre si. A comparação destes valores com valores máximos admissíveis pré-estabelecidos permite a avaliação, em tempo real, de situações de emergência e a emissão de alertas dirigidos às entidades portuárias.O sistema é constituído por 4 módulos:I

N/A

N/A

N/A