Artigos de Revista
Info
Energy rate balance applied to coastal engineering problems by using RANS-VoF models in numerical wave flumes 
Nowadays, the use of RANS-based models for simulating numerical wave flumes and studying coastal engineering structures is common and allows investigating accurately phenomena that occur in current/wavestructure interactions. Comprehension of energy transformations in these processes can support designers tooptimize the system. In this study, a methodology to evaluate the terms of the energy rate balance in coastalengineering problems is developed. The methodology is applied to the propagation of regular waves in numericalwave flumes, onshore oscillating water column wave energy converter integrated into a vertical breakwater, andtwo types of rubble-mound breakwaters. The direct determination of the energy rate due to viscous and urbulencelosses and the porous resistance in rubble-mound breakwaters are carried out by time integration insidethe computational domain. Besides, the reflected and transmitted energy rates in the flume are calculated bymeans of this methodology, instead of the standard gauge methods, commonly used in physical and numericalflumes. Complementary, studies may be carried out for random incident waves and the methodology can beapplied to 3D wave tanks.
Ano: 2025
Autor(es): Teixeira, P.; Didier, E.
Revista: Ocean Engineering
Editor: Elsevier
Keywords: Rubble-mound breakwater; Oscillating water column wave energy converter; Energy rate balance; Coastal engineering; Numerical wave flume; RANS models
Info
An assessment of 3D scanning methods in physical models
The evaluation of damage progression caused by wave action on physical models of rubble-mound breakwaters can be accomplished through two types of methods: quantifying the movements and falls of the resistant armor elements by visual inspection (the traditional, classical method) or determining the eroded volumes and depths between consecutive surveys of armor layers using sensors and photogrammetric methods (3D scanning methods). Of the latter, one may use techniques such as the so-called "Kinect", "Photogrammetry" and "LiDAR". The end-product of these techniques is, among others, point clouds, which allow obtaining three-dimensional surface models. In this paper, four of the latter techniques (3D scanning methods) are briefly described, and a comparison is made between them regarding their usability in current tests, their advantages and disadvantages, among themselves for a study case of the physical 3D model of the Ericeira breakwater. In evaluating survey quality across the four methods, RMSE (root mean square error) was employed to align obtained point clouds with ground control points (GCP). Notably, Photogrammetry, Kinect, and Azure techniques showed excellent RMSE values. Conversely, the LiDAR-derived-method cloud, using a smartphone with LiDAR sensor and 3dScanner app, fails to yield acceptable and accurate results for the research objectives of this paper.
Ano: 2024
Autor(es): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Jónatas, R.
Editor: COSE
Keywords: 3D scans; Reconstruction Techniques; Damage Progression; Breakwater; Physical Modelling
Info
Analytical and numerical modelling of wave dissipation over rigid and flexible vegetation in a flume: Drag coefficient calibration
Data of wave dissipation over vegetation fields was collected from laboratory flume experiments, fordifferent vegetation and wave conditions. An analytical model and a numerical model are applied to estimatethe wave dissipation obtained in the experiments, through the calibration of the bulk drag coefficient (CD).Results and conclusions will analyse and compare each model behaviour and obtained CD values.
Ano: 2024
Autor(es): Reis, R.; Fortes, C. J. E. M.; Suzuki , T.
Editor: IARH EUROPE CONGRESS
Info
Deep Neural Network Enhanced Early Warning System for Ports Operations
Downtime of port terminals results in large economic losses and has a major impact on the overallcompetitiveness of ports. EarlyWarning Systems (EWS) are an effective tool to reduce ports
Ano: 2024
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Gomes, A.
Editor: IARH EUROPE CONGRESS
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Número Páginas:
1-15pp.
Autor(es): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was todevelop, test, and implement an operational coastal erosion early warning system supported by a particularmethod of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numericalmodels, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system wasdeveloped in two phases. In the development phase, all information required to apply the machine learningmethod was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosioncaused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpactindex. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and theheight of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated informationwas built. After the training of the network, the conditional probability tables were created. These tablesconstituted the ground knowledge to make the predictions in the second phase. This methodology was validated(1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latestconsidered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through theunbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered theentire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that theBayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms,depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditionsdisappeared after predicting potential consequences. Regarding the Regarding the second validationapproach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set ofvarying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Autor(es): Garzon, J.L.; Ferreira, O.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
189 (2024) 104460.
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental investigation of wave severity and mooring pretension on the operability of a moored tanker in a port terminal
This paper investigates the influence of sea severity and mooring line pretension configuration on the operabilityof a moored vessel at a modified berthing site inside a port. A physical model was constructed to replicate thenew layout of the port of Leix
Ano: 2024
Autor(es): Abdelwahab, H.S.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Guedes Soares, C.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
291 (2024) 116243.
Keywords: Mooring pretension; Moored ship; Ship motions; Port downtime; Ship operability; Physical modelling
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Ano: 2024
Número Páginas:
16p..
Autor(es): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Experimental study on drag coefficient of flexible vegetation under non-breaking waves
Laboratory experiments of wave propagation over rigid and flexible vegetation fields, with the same configurations, were conducted to understand the effect of vegetation flexibility on the drag coefficient (CD). The direct method and the least squares method (LSM), based on force and flow measurements, are applied to calculate the CD in the experimental conditions. The formulations of both methods are extended to estimate the CD for flexible vegetation cases. A video analysis was performed to account for the swaying motion. Typically, wave dissipation is lower for flexible than for rigid vegetation of the same configuration, under the same flow condition. Therefore, a proportional effect in the corresponding CD results, obtained from common CD calibration to wave dissipation without considering vegetation motion, is usually observed. However, the present results show that although the wave dissipation was 34% lower for flexible relative to rigid vegetation, the respective CD values were close. CD estimations considering vegetation motion and inertia suggest that CD of flexible vegetation was up to 13% higher relative to rigid vegetation. Accounting for inertia reduced the CD for rigid vegetation up to 7%, while raised the CD for flexible vegetation up to 13%.
Ano: 2024
Número Páginas:
14p..
Autor(es): Reis, R.; Fortes, C. J. E. M.; Rodrigues, J.; HU, Z.; Suzuki , T.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 296.
Keywords: Wave dissipation; Inertia; Vegetation motion; Flexible vegetation; Drag coefficient
Info
Exploring Wave
Aquatic vegetation in the littoral zone plays a crucial role in attenuating wave energy andprotecting coastal communities from hazardous events. This study contributes to the developmentof numerical models aimed at designing nature-based coastal defense systems. Specifically, a novelnumerical application for simulating wave
Ano: 2024
Autor(es): El Rahi, J.; Martinez-Estevez, I.; Reis, R.; Tagliafierro, B.; Dominguez, J.M.; Crespo, A.J.C.; Stratigaki, V.; Suzuki, T.; Troch, P.
Editor: MDPI
Keywords: Project chrono; DualSPHysics; SPH-FEA coupling; Fluid
|
Comunicações
Info
Experimental characterization of ship motions induced by passing ships
Using physical modelling, the movements of an otherwise motionless ship induced by the wake waves generated by another ship that sails in its vicinity are analyzed.The tests were carried out at one of the wave tanks of the Portuguese Civil Engineering Laboratory (LNEC). The moving ship is a self-propelled scale model of the
Ano: 2017
Número Páginas:
12p.
Autor(es): Pedro, F.; Santos, J. A.; Hinostroza , M.; Pinheiro, L.; Fortes, C. J. E. M.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Ship motions; Interaction between ships; Physical model tests; Wake waves
Info
Forecast, risk assessment and alert system for ships in ports
This work presents the development of a numerical integrated system to help prevent emergency situations and minimize risks associated with sea waves
Ano: 2017
Número Páginas:
13p.
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Lopes, P.; Poseiro, P.
Editor: Artes Gráficas J. Martínez, S.L
Keywords: Waves; Alert system; Risk assessment; Moored ships
Info
Galgamento em estruturas verticais: comparação de dados de ensaios com resultados do modelo numérico AMAZON e de fórmulas empíricas
Neste trabalho estuda-se o galgamento em estruturas marítimas verticais impermeáveis através da aplicação do modelo numérico AMAZON, que é um modelo bidimensional, baseado na resolução das equações não lineares de águas pouco profundas. Para validar a sua aplicação, os resultados de caudal médio galgado obtidos com o modelo foram comparados com os resultados de ensaios em modelo físico bidimensional realizados anteriormente e disponíveis na base de dados do projeto europeu CLASH. Os resultados foram ainda comparados com os das fórmulas empíricas / semi-empíricas de Van der Meer & Bruce (2014), Goda (2008) e de Hedges & Reis (Reis et al., 2013). A fórmula de Van der Meer & Bruce apresenta melhores aproximações aos caudais médios medidos que constam na base de dados do CLASH, seguida da fórmula de Goda e dos resultados do AMAZON, embora estes dois últimos apresentem valores bastante próximos. Assim, enquanto não se fizerem melhorias no modelo e/ou não se estender a outros ensaios a análise feita no âmbito deste trabalho, os resultados sugerem que não há vantagem na sua utilização face às formulações disponíveis, tendo também em conta o tempo computacional significativo exigido para executar o AMAZON.
Ano: 2017
Número Páginas:
17p.
Autor(es): Reis, M. T. L. G. V.; Neves, M. G.; Gaspar, J.J.J.; Hu, K.
Editor: PIANC
Keywords: Modelo numérico AMAZON; Estruturas verticais; Galgamento
Info
Galgamento num quebra-mar de talude em cenários de alterações climáticas: resultados obtidos em modelo físico e com fórmulas empíricas
O projeto HYDRALAB+ (H2020-INFRAIA-2014-2015) reúne uma rede Europeia de institutos de hidráulica para o estudo de estratégias de adaptação às alterações climáticas através de ensaios experimentais e cujos resultados são essenciais para a calibração e validação de modelos numéricos, fórmulas empíricas, redes neuronais, etc. Os ensaios experimentais desenvolvidos no LNEC, no âmbito do HYDRALAB+, Tarefa 8.2 do RECIPE tem como objetivo a análise do dano num quebra-mar de talude, do galgamento e do espraiamento para quatro cenários de temporal correspondentes a situações extremas associadas a cenários de alterações climáticas. Os ensaios foram realizados num canal de ondas irregulares no qual foiimplementada uma secção transversal do quebra-mar, com um manto constituído por enrocamento.No presente estudo comparam-se os valores do galgamento medidos nos ensaios em modelo físico com resultados estimados por fórmulas empíricas. Testou-se o efeito de um temporal num cenário de alterações climático, através do aumento da altura significativa de onda com o aumento do nível de água. Foi testado um conjunto de condições de agitação incidentes em combinação com dois níveis de maré.A análise dos resultados é feita com o intuito de estimar com precisão a ocorrência de galgamento em quebra-mares, um fenómeno que ainda se torna mais relevante em cenários de alterações climáticas. Com efeito, nestes cenários é previsível a subida do nível médio do mar, bem como o aumento da intensidade e frequência de temporais, o que pode dar origem a fenómenos de espraiamento/galgamento cada vez mais frequentes, tornando assim cada vez mais vulneráveis as estruturas de proteção costeiras e portuárias, bem como as zonas por elas protegidas.
Ano: 2017
Número Páginas:
13p.
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Reis, M. T. L. G. V.; Lemos, R.; Neves, M. G.; Ramos, A.; Capitão, R.
Editor: PIANC
Keywords: Fórmulas empíricas; Modelação física; Alterações climáticas; Galgamento; Quebra-mar
Info
HIDRALERTA: o sistema e as ferramentas de validação
Este trabalho pretende mostrar os procedimentos utilizados pelo sistema HIDRALERTA para a previsão dos galgamentos costeiros, bem como as ferramentas que têm sido utilizadas para a sua validação. Foram reproduzidas com o sistema as situações de tempestades passadas, para as quais houve relatos documentados de galgamentos significativos e que causaram danos. Esta simulação permitiu perceber a fiabilidade global do sistema e ajustar os limites pré- estabelecimentos para o acionamento de alertas. Com o sistema operacional desde 2015, a documentação que tem sido levantada, através de fotografias e vídeos, pelas autoridades e comunidade locais aquando da previsão da ocorrência de tempestades, têm sido um grande contributo para o melhoramento do sistema. Foi instalado no campo, um sistema de videovigilância que permite detetar e captar automaticamente imagens de galgamentos para comparar com os resultados do sistema. De forma complementar, para avaliação da agitação marítima, utilizam-se as medições da boia ondógrafo instalada junto ao porto e para a validação do fenómeno do galgamento, compararam-se as medições obtidas nos ensaios em modelo físico do perfil tipo do quebra-mar sul, com os resultados da ferramenta neuronal NN_OVERTOPPING2 (Coeveld et al., 2005) (atualmente incorporada no sistema) e com o modelo numérico SWASH (Zijlema et al., 2011) (que se encontra em processo de implementação).
Ano: 2017
Número Páginas:
20p.
Autor(es): Poseiro, P.
Editor: PIANC
Keywords: Porto da Praia da Vitória; Previsões; Eventos históricos; Validação; Sistema HIDRALERTA
Info
Measuring damage in physical model tests of rubble mounds
This paper studies novel ways to evaluate armour damage in physical models of coastal structures. High-esolution damage data for reference rubble mound breakwaters obtained under the HYDRALAB+ joint-esearch project are analysed and discussed. These tests are used to analyse the way to describe damage, the influence of the sequence of testing, and touches on the possible influence of sea level rise. Results of two test programmes were used. Firstly, 3D physical model tests carried out at the University of Porto, in cooperation with Deltares, were used. Here a wide breakwater trunk was used for statistical reasons. Additionally, 2D test results from LNEC were analysed. Tests for a sea level rise scenario resulted in less damage to the seaside slope. In addition, clear differences between
Ano: 2017
Número Páginas:
10p.
Autor(es): Hofland, B.; Rosa-Santos, P.; Taveira-Pinto, F.; Almeida, E.; Lemos, R.; Mendonça, A. C.; Fortes, C. J. E. M.
Editor: ICE - Institution of Civil Engineers
Keywords: Damage depth; Damage parameter; Breakwaters; Rubble-mound
Info
Modelação física e numérica da interação hidrodinâmica entre dois navios
Nesta comunicação, analisa-se, recorrendo à modelação física e à modelação numérica, a interação hidrodinâmica entre dois navios, um dos quais parado, o navio
Ano: 2017
Número Páginas:
20p.
Autor(es): Pedro, F.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Hinostroza , M.
Editor: PIANC
Keywords: Interação navio-navio; Modelo numérico; Modelo físico; Movimentos dos navios; Ondas de esteira
Info
Numerical analysis of the distribution of incident wave energy on an onshore oscillating water column wave energy converter
In this study, a numerical analysis to evaluate the energy efficiency of an Oscillating Water Column (OWC) wave energy converter is carried out. The device geometry is based on the pilot plant installed on Pico Island, Azores, Portugal. The methodology consists in calculating the percentage of the incident energy that is distributed along the wave energy conversion. The FLUENT® numerical model, which is based on the Reynolds-Averaged Navier-Stokes (RANS) equations, is used. The Volume of Fluid (VoF) method is employed to take into account the water and air fluids. The case study comprises a flume 10 m deep with an onshore OWC at its end. The distribution of the incident wave energy (1 m wave height with a 9 s period) is determined in terms of reflected wave energy, water column oscillation potential energy, pneumatic energy and energy losses due to viscosity and turbulence dissipations. Results show that the incident wave energy is distributed around 37% for the sum of reflected wave energy and viscosity energy loss, 52% for pneumatic energy and 11% for water column oscillation potential energy.
Ano: 2017
Número Páginas:
13p.
Autor(es): Gaspar, L. A.; Teixeira, P.; Didier, E.; Neves, M. G.
Editor: Não disponível
Keywords: Volume of fluid; Oscillating water column device; Finite volume method; Numerical simulation; Wave energy
Info
Numerical analysis of the influence of air compressibility effects on the oscillating water column water energy converter chamber
The most studied device used for extracting wave energy is the Oscillating Water Column (OWC). In general, numerical simulations of these cases by means of models based on Reynolds-Averaged-Navier-Stokes (RANS) equations adopt the Volume of Fluid (VoF) method to take into account the water and air whose flows are incompressible. The aim of this study is to investigate the influence of the compressibility effect on the air inside the chamber by means of FLUENT® numerical model. Both water and air flows are still considered incompressible, but, at every instant, a pressure based on an analytical equation that takes into account the turbine characteristic relation (kt) of a Wells turbine and the isentropic transformation of the air is imposed on the top boundary of the chamber. Incident waves with period of 9 s and 1 and 2 m high are imposed in a flume 10 m deep with an onshore OWC at its end (kt = 240 Pa s m-3). Results show differences between incompressible and compressible air around 12% in the air pressure amplitude inside the chamber and about 21% in the average pneumatic power.
Ano: 2017
Número Páginas:
14p.
Autor(es): Gonçalves, R.; Teixeira, P.; Didier, E.; Torres, F.
Editor: Não disponível
Keywords: Volume of fluid; Finite volume method; Numerical simulation; Oscillating water column device; Wave energy
Info
Overtopping events in breakwaters: comparison of 2D physical experiments and empirical formulae
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure as well as the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase run-up/overtopping events and make the existing coastal/harbour structures more vulnerable to damage. Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. Project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios. The experimental work developed at LNEC within HYDRALAB+, TASK 8.2 of RECIPE, entitled
Ano: 2017
Número Páginas:
3749-3757pp.
Autor(es): Mendonça, A. C.; Lemos, R.; Reis, M. T. L. G. V.; Fortes, C. J. E. M.; Neves, M. G.; Ramos, A.; Capitão, R.
Editor: IAHR & USAINS HOLDING SDN BHD
Keywords: Hydralab; Empirical formulae; Physical experiments; Breakwaters; Overtopping
|
|
|
Capítulos de Livros
Info
Multi-functional artificial reefs for coastal protection
N/A
Ano: 2009
Número Páginas:
153-210 pp.
Autor(es): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Teses de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Ano: 1999
Número Páginas:
159 p.
Autor(es): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Ano: 1998
Número Páginas:
594 p.
Autor(es): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Ano: 1998
Número Páginas:
346 p.
Autor(es): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Ano: 1973
Autor(es): Carvalho, M. M.
Editor: ******
|
|
|
Relatórios
Info
D1.1: Analysis of past extreme events, lessons learned ans SoA models V1
C2IMPRESS is a multi-disciplinary project which aims to enhance understanding and public awareness on multi-hazard risk, based on innovative models, methods, frameworks, tools and technologies to develop decision-making platforms with a fine-grained spatio-temporal data to better assess impacts, vulnerability and resilience on natural hazards. This Report is the Deliverable 1.1 and belongs to Work Package 1, which is mainly addressed to identify the past climate and physical processes that underlie natural disaster events and their consequences
Ano: 2023
Autor(es): Moragues, A.; Estrany, J.; Alves, E.; Zózimo, A. C.; Leitão, T. E.; Ruiz, M.; Oliveira, M. M.; Sfetsos, A.; Fernandes, T. F.
Info
Demonstration and technical tours plan
A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project
Ano: 2022
Autor(es): Batista, F. A.; Marecos, V.; Antunes, M. L.; Macedo, A. L.; Freire, A. C.; Capitão, R.; Arsénio, E.; Maia, L.
Info
Demonstration submission and selection guidelines
The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.
Ano: 2022
Autor(es): Freire, A. C.; Arsénio, E.; Macedo, A. L.; Antunes, M. L.; Capitão, R.; Belinha, M.
Info
Technical tours organization criteria and procedures report
According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.
Ano: 2022
Autor(es): Capitão, R.; Macedo, A. L.; Arsénio, E.; Antunes, M. L.; Freire, A. C.
Editor: TRA LISBON 2022
Info
Data Repository Rules. Deliverable 10.4
This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data from physical modeling; Zenodo; Data repository structure
Info
Data Storage Report. RECIPE Task 8.2: Overtopping events in breakwaters under climate change scenarios
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.
Ano: 2018
Autor(es): Fortes, C. J. E. M.; Mendonça, A. C.; Lemos, R.; Neves, M. G.; Reis, M. T. L. G. V.; Capitão, R.
Keywords: Climate change; Overtopping; Data repository
Info
Facilitating the re-use and exchange of experimental data. Task 10.1 Critical review. D10.2 Critical Review of data flux between laboratory models, numerical models and field case studies
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Field data; Numerical modeling data; Physical modeling data; Data flux
Info
Facilitating the re-use and exchange of experimental data. Task 10.2 Data Standards and Licenses. D 10.3 Data Standards Report
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data management options; Experimental data; Data formats
Info
Protocols for representing variability and unsteadiness in flume facilities. Deliverable Number 8.2
This deliverable is related to task 8.2
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Lemos, R.; Capitão, R.; Neves, M. G.; Reis, M. T. L. G. V.
Keywords: Extreme events; Climate change; Variability in flume facilities
Info
Sistema de previsão, alerta e gestão de riscos causados pela agitação marítima - Relatório inicial Arquitetura e características gerais do sistema para os portos de Madalena do Pico, São Roque do Pi
Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.
Ano: 2018
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.
Keywords: Porto de Praia da Vitória; Porto de São Roque do Pico; Porto de Madalena do Pico; Agitação marítima; Alerta e gestão de riscos; Sistema de previsão
|
|
|
|
|
Outros
Info
Porto Santo Island. Wave Characterization and propagation. poster apresentado ao International Coastal Symposium (ICS 04)
N/A
Ano: 2004
Autor(es): Fortes, C. J. E. M.
Editor: ******
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual report of Post-Doctoral Research.
N/A
Ano: 2004
Autor(es): Reis, M. T. L. G. V.
Editor: ******
Info
Software do Núcleo de Portos e Estruturas Marítimas
N/A
Ano: 2003
Autor(es): NPE, Núcleo
Editor: ******
Info
River Information Services. PIANC s Technical Brief on vessel traffic and transport management in inland waterways and modern information systems
N/A
Ano: 2002
Autor(es): J.A Covas
Editor: ******
Info
Vessel Traffic and Transport Management in the Inland Waterways and Modern Information Systems
N/A
Ano: 2002
Autor(es): J.A Covas
Editor: ******
Info
MEDIRES - Ferramentas de Diagóstico e de Inspecção Robotizada de Estruturas Semi-Submersas
N/A
Ano: 2001
Autor(es): Santos, J. A.; Silvestre, C.
Editor: ******
Info
Observação Sistemática de Obras Marítimas. Súmula da actividade desenvolvida pelo LNEC
N/A
Ano: 2001
Autor(es): Silva, L. G.; Santos, J. A.; Neves, M. G.; Damião, A. D.
Editor: ******
Info
Protecção da Orla Costeira da Vila das Lajes do Pico. Relatório do Grupo de Trabalho para Definição e Análise de Soluções Alternativas
N/A
Ano: 2001
Número Páginas:
20 p.
Autor(es): Oliveira, J. M. M.; Silva, L. G.; Azevedo, J. M.
Editor: ******
Info
Software do Núcleo de Portos e Praias
N/A
Ano: 2001
Autor(es): NPE, Núcleo
Editor: ******
Info
Solução Vectorizável e Parelelizável de Sistemas de Equações de Grande Dimensão Proposta para passagem à 2ª fase do projecto, financiado pela FCT, no âmbito dos Programas Operacionais Ciência, Tecnol
N/A
Ano: 2001
Autor(es): Fernandes, J. L. M.; Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
|
Departamento de Hidráulica e Ambiente
