Artigos de Revista
Info
Energy rate balance applied to coastal engineering problems by using RANS-VoF models in numerical wave flumes 
Nowadays, the use of RANS-based models for simulating numerical wave flumes and studying coastal engineering structures is common and allows investigating accurately phenomena that occur in current/wavestructure interactions. Comprehension of energy transformations in these processes can support designers tooptimize the system. In this study, a methodology to evaluate the terms of the energy rate balance in coastalengineering problems is developed. The methodology is applied to the propagation of regular waves in numericalwave flumes, onshore oscillating water column wave energy converter integrated into a vertical breakwater, andtwo types of rubble-mound breakwaters. The direct determination of the energy rate due to viscous and urbulencelosses and the porous resistance in rubble-mound breakwaters are carried out by time integration insidethe computational domain. Besides, the reflected and transmitted energy rates in the flume are calculated bymeans of this methodology, instead of the standard gauge methods, commonly used in physical and numericalflumes. Complementary, studies may be carried out for random incident waves and the methodology can beapplied to 3D wave tanks.
Ano: 2025
Autor(es): Teixeira, P.; Didier, E.
Revista: Ocean Engineering
Editor: Elsevier
Keywords: Rubble-mound breakwater; Oscillating water column wave energy converter; Energy rate balance; Coastal engineering; Numerical wave flume; RANS models
Info
An assessment of 3D scanning methods in physical models
The evaluation of damage progression caused by wave action on physical models of rubble-mound breakwaters can be accomplished through two types of methods: quantifying the movements and falls of the resistant armor elements by visual inspection (the traditional, classical method) or determining the eroded volumes and depths between consecutive surveys of armor layers using sensors and photogrammetric methods (3D scanning methods). Of the latter, one may use techniques such as the so-called "Kinect", "Photogrammetry" and "LiDAR". The end-product of these techniques is, among others, point clouds, which allow obtaining three-dimensional surface models. In this paper, four of the latter techniques (3D scanning methods) are briefly described, and a comparison is made between them regarding their usability in current tests, their advantages and disadvantages, among themselves for a study case of the physical 3D model of the Ericeira breakwater. In evaluating survey quality across the four methods, RMSE (root mean square error) was employed to align obtained point clouds with ground control points (GCP). Notably, Photogrammetry, Kinect, and Azure techniques showed excellent RMSE values. Conversely, the LiDAR-derived-method cloud, using a smartphone with LiDAR sensor and 3dScanner app, fails to yield acceptable and accurate results for the research objectives of this paper.
Ano: 2024
Autor(es): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Jónatas, R.
Editor: COSE
Keywords: 3D scans; Reconstruction Techniques; Damage Progression; Breakwater; Physical Modelling
Info
Analytical and numerical modelling of wave dissipation over rigid and flexible vegetation in a flume: Drag coefficient calibration
Data of wave dissipation over vegetation fields was collected from laboratory flume experiments, fordifferent vegetation and wave conditions. An analytical model and a numerical model are applied to estimatethe wave dissipation obtained in the experiments, through the calibration of the bulk drag coefficient (CD).Results and conclusions will analyse and compare each model behaviour and obtained CD values.
Ano: 2024
Autor(es): Reis, R.; Fortes, C. J. E. M.; Suzuki , T.
Editor: IARH EUROPE CONGRESS
Info
Deep Neural Network Enhanced Early Warning System for Ports Operations
Downtime of port terminals results in large economic losses and has a major impact on the overallcompetitiveness of ports. EarlyWarning Systems (EWS) are an effective tool to reduce ports
Ano: 2024
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Gomes, A.
Editor: IARH EUROPE CONGRESS
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Número Páginas:
1-15pp.
Autor(es): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was todevelop, test, and implement an operational coastal erosion early warning system supported by a particularmethod of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numericalmodels, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system wasdeveloped in two phases. In the development phase, all information required to apply the machine learningmethod was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosioncaused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpactindex. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and theheight of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated informationwas built. After the training of the network, the conditional probability tables were created. These tablesconstituted the ground knowledge to make the predictions in the second phase. This methodology was validated(1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latestconsidered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through theunbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered theentire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that theBayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms,depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditionsdisappeared after predicting potential consequences. Regarding the Regarding the second validationapproach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set ofvarying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Autor(es): Garzon, J.L.; Ferreira, O.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
189 (2024) 104460.
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental investigation of wave severity and mooring pretension on the operability of a moored tanker in a port terminal
This paper investigates the influence of sea severity and mooring line pretension configuration on the operabilityof a moored vessel at a modified berthing site inside a port. A physical model was constructed to replicate thenew layout of the port of Leix
Ano: 2024
Autor(es): Abdelwahab, H.S.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Guedes Soares, C.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
291 (2024) 116243.
Keywords: Mooring pretension; Moored ship; Ship motions; Port downtime; Ship operability; Physical modelling
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Ano: 2024
Número Páginas:
16p..
Autor(es): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Experimental study on drag coefficient of flexible vegetation under non-breaking waves
Laboratory experiments of wave propagation over rigid and flexible vegetation fields, with the same configurations, were conducted to understand the effect of vegetation flexibility on the drag coefficient (CD). The direct method and the least squares method (LSM), based on force and flow measurements, are applied to calculate the CD in the experimental conditions. The formulations of both methods are extended to estimate the CD for flexible vegetation cases. A video analysis was performed to account for the swaying motion. Typically, wave dissipation is lower for flexible than for rigid vegetation of the same configuration, under the same flow condition. Therefore, a proportional effect in the corresponding CD results, obtained from common CD calibration to wave dissipation without considering vegetation motion, is usually observed. However, the present results show that although the wave dissipation was 34% lower for flexible relative to rigid vegetation, the respective CD values were close. CD estimations considering vegetation motion and inertia suggest that CD of flexible vegetation was up to 13% higher relative to rigid vegetation. Accounting for inertia reduced the CD for rigid vegetation up to 7%, while raised the CD for flexible vegetation up to 13%.
Ano: 2024
Número Páginas:
14p..
Autor(es): Reis, R.; Fortes, C. J. E. M.; Rodrigues, J.; HU, Z.; Suzuki , T.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 296.
Keywords: Wave dissipation; Inertia; Vegetation motion; Flexible vegetation; Drag coefficient
Info
Exploring Wave
Aquatic vegetation in the littoral zone plays a crucial role in attenuating wave energy andprotecting coastal communities from hazardous events. This study contributes to the developmentof numerical models aimed at designing nature-based coastal defense systems. Specifically, a novelnumerical application for simulating wave
Ano: 2024
Autor(es): El Rahi, J.; Martinez-Estevez, I.; Reis, R.; Tagliafierro, B.; Dominguez, J.M.; Crespo, A.J.C.; Stratigaki, V.; Suzuki, T.; Troch, P.
Editor: MDPI
Keywords: Project chrono; DualSPHysics; SPH-FEA coupling; Fluid
|
Comunicações
Info
Numerical simulation of wave interacting with a submarine outfall using IH-2VOF
IH-2VOF numerical model is applied to study wave interacting with a circular cylinder with adiameter of 0.02 m in a water depth of 0.27 m, with a wave period of 1.08 s and a wave heightof 0.047 m. The study includes analyses of convergence with the mesh discretization. Theconvergence of forces, velocities and Keulengan-Carpenter number was obtained when 32cells were used to define the cylinder.The influence of the wall proximity on the forces was also analyzed and 15 different ratiosbetween the pipe distance from the bottom and the pipe diameter were simulated, varying from0.0625 to 1.5. Results of lift, drag and inertia coefficients are compared with the experimentalresults of the experimental study of Jarno-Druaux et al. (1995) and the same trend in thevariation with the gap between the cylinder and the bottom was obtained with the modelgiving slightly larger values.
Ano: 2013
Número Páginas:
10p.
Autor(es): Inverno, J.; Neves, M. G.; Didier, E.
Info
Numerical simulation study on the propagation of waves generated by vessels using a modified version FUNWAVE
This paper compares the results obtained with the introduction of two new pressuredistribution functions in the numerical model FUNWAVE that was modified to simulate wavegeneration by sailing ships. The results obtained by Nascimento (2007) which used thepressure distribution functions of Li and Sclavounos (2002) in the free surface are taken as thereference values. Tests were performed with a ship sailing along the line defined by theintersection of a 1:50 slope with a constant depth bottom and the influence of the maximumpressure value was investigated. Whatever the pressure distribution function, the results showthat in the sloping bottom the crests of waves are bent along the slope and in the constantdepth the standard Kelvin wave patterns can be found.
Ano: 2013
Número Páginas:
10p.
Autor(es): Rodrigues, S.; Nascimento, M.; Fonseca, N.; Santos, J. A.; Neves, C. F.
Info
Numerical software package SWAMS
Container ships traffic has increased significantly in recent years as well as the ship dimensions,therefore the need for port expansion and construction of new ports. Portugal is no exception to thisglobal phenomenon and there are plans to expand some of the major Portuguese ports (eg Sines andLeixões). These large ships require depths and widths of the entrance channels relatively large and itis inevitable that waves enter the ports. These waves can cause serious problems in port operation as aresult of excessive movement of the ship. The costs associated with berth downtime are enormous.For container ships, horizontal movements must be very small due to crane operation constraints.Excessive movements can also cause ship collisions with berth or with other ships or the breakage ofmooring lines, all with serious economic losses. From the above it becomes clear how important it isthe ability to know the sea conditions that lead to excessive movement of ships. This knowledgewould bring a huge asset to the port operational management and it could point out ways ofmitigating these problems.This paper describes the development of an integrated tool made of several numerical models able tocharacterize the wave climate and its effects in ports, particularly in terms of movements of shipsmoored to a port terminal. The validation of this tool is presented in the form of some simple testcases. Additionally an application to a real harbour situation is also presented. The informationobtained from this tool is a major help in port management and it can significantly increase thecompetitiveness of our ports.
Ano: 2013
Número Páginas:
17p.
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Santos, J. A.; Fernandes, J. L. M.
Keywords: Port activities management; Numerical models; Moored ship behaviour; Ship
Info
O modelo SWAN como ferramenta útil na previsão de onda em recinto fechado
O reservatório do lago da barragem de Ilha Solteira, que tem uma extensão de 100 km, está localizado no noroeste do estado de São Paulo, Brasil. Devido à sua grande dimensão, ondas geradas por ventos podem causar problemas à segurança de navegação, para a estabilidade das margens do rio, para as infra-estruturas de todo o reservatório, ou mesmo para a segurança pública. Em 2010/2011, uma campanha de dados de campo foi realizada a fim de medir o campo de ventos, de ondas e altura significativa. A batimetria de fundo do lago e a velocidade do vento foram usados no Swan (Simulating Waves Nearshore) para prever a altura significativa das ondas. A partir dos resultados obtidos pode-se dizer que a previsão do modelo numérico apresenta semelhanças com os valores experimentais.
Ano: 2013
Número Páginas:
8p.
Autor(es): Vieira, A.; Maciel, G.; Fortes, C. J. E. M.
Keywords: Sensor de pressão; Swan; Sistemas de previsão de ondas
Info
O projeto Hidralerta - sistema de previsão e alerta de inundações em zonas costeiras e portuárias
Nesta comunicação descreve-se o projeto HIDRALERTA
Ano: 2013
Número Páginas:
24p.
Autor(es): Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.; Capitão, R.; Santos, J. A.; Pinheiro, L.; Rodrigues, A.; Sabino, A.; Rodrigues, M. C.; Raposeiro, P.; Ferreira, J.; Silva, C. J. R.; Simões, A.; Azevedo,
Info
Photogrammetric profile survey in scale model tests of rubble-mound breakwaters
Profile surveying in scale model tests of rubble-mound breakwaters, during a test series is,somehow, a time consuming procedure.Aiming to speed up this procedure, a photogrammetric method has been tested, as analternative to the mechanical profiler.This technique makes use of a software package that allows one to correct the refraction oflight at the air-water interface, enabling the realization of surveys without having to empty thecanal. This survey technique was already tested for two-dimensional scale models. The goal ofthe present work is to extend this survey technique to three-dimensional scale models.
Ano: 2013
Número Páginas:
11p.
Autor(es): Lemos, R.; Santos, J. A.
Info
Physical modelling of bichromatic wave propagation and wave breaking in a wave flume
This paper describes a wide range of wave flume tests which main objective is the study waveshoaling and breaking over a set of different gentle slopes for several incident waves and thusto contribute for a better understand of the hydrodynamics of wave transformation and wavebreaking.For a bichromatic wave resulting from a combination of two regular waves with periodsT=1.1 and 1.5s, with the same wave height H=0.08m, are presented and discussed thefollowing results: free surface elevation at selected sections along the flume; significant waveheight, significant and average periods along the flume; particle velocity components atdifferent locations along the flume; average, maximum and minimum values of thelongitudinal component of the velocity along the flume; free surface elevation and velocitycomponents spectral analysis; two dimensional distribution of the three components of thevelocity; and longitudinal velocity component vertical profiles.
Ano: 2013
Número Páginas:
10p.
Autor(es): Conde, J. M.; Fortes, C. J. E. M.; Didier, E.; Lemos, R.; Reis, R.
Info
Propagação de ondas geradas por embarcações sobre um fundo inclinado
Esta comunicação apresenta os resultados da introdução no modelo numéricoFUNWAVE de duas distribuições de pressão existentes na literatura para simular apropagação de ondas geradas por embarcações em regiões de batimetria variável. Aquelemodelo foi adaptado por Nascimento [1]de forma a incluir uma distribuição de pressõesmóvel nas equações da quantidade de movimento, na posição correspondente ao plano deflutuação do navio, sendo capaz de reproduzir a maioria dos fenómenos envolvidos napropagação da onda em direção à costa. Considerou-se como valores de referência osobtidos com a função de distribuição de Li e Sclavounos [2] implementada por Nascimento[1].
Ano: 2013
Número Páginas:
1656-1669pp.
Autor(es): Rodrigues, S.; Nascimento, M.; Fonseca, N.; Santos, J. A.; Neves, C. F.
Keywords: Modelo numérico funwave; Pressão móvel; Ondas geradas por embarcações; Propagação de ondas
Info
Propagation over a sloping bottom of waves generated by ships
This paper presents the results for the two additional pressure distribution functionsincluded in the modified model FUNWAVE to simulate the propagation of waves generatedby ships, where the ship is represented by a pressure distribution function. This modifiedmodel was adapted by Nascimento [1] in order to include a specified moving pressure at thefree surface where the most of the phenomena involved in the transformation of the wave arereproduced. The value proposed by Nascimento [1] for the maximum value of the pressuredistribution function of Li and Sclavounos [6] was used as reference in the two new pressuredistribution functions.
Ano: 2013
Número Páginas:
344-355pp.
Autor(es): Rodrigues, S.; Nascimento, M.; Fonseca, N.; Santos, J. A.; Neves, C. F.
Keywords: Pressure distribution; Funwave model; Ship waves
Info
Rede ARTMAP Nebulosa Aplicada ao Estudo de Agitação Marítima no Porto de Sines/Portugal
Neste trabalho, é descrito a aplicação de umsistema de redes neurais ARTMAP-Fuzzy na previsão deagitação marítima na costa oeste portuguesa e, maisconcretamente, no Porto de Sines. O treinamento desta redeneural é efetuado com dados de medição de boia-ondógrafo aolargo do porto e resultados do modelo numérico de propagaçãode ondas na zona de entrada do porto, de 01/07/2010 a30/06/2012. Posteriormente, avaliou-se o desempenho da redequer para diferentes meses e uma semana selecionadosaleatoriamente no anterior período, quer para um anodesconhecido à rede, o de 2009. Estes testes mostram aspotencialidades e limitações da rede neste tipo de aplicações.
Ano: 2013
Número Páginas:
6p.
Autor(es): Santos, F.; Reis, M. T.; Fortes, C. J. E. M.; Lotufo, A.; Maciel, G.
Keywords: Agitação marítima; Artmap fuzzy; Redes neurais artificiais
|
|
|
Capítulos de Livros
Info
Multi-functional artificial reefs for coastal protection
N/A
Ano: 2009
Número Páginas:
153-210 pp.
Autor(es): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Teses de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Ano: 1999
Número Páginas:
159 p.
Autor(es): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Ano: 1998
Número Páginas:
594 p.
Autor(es): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Ano: 1998
Número Páginas:
346 p.
Autor(es): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Ano: 1973
Autor(es): Carvalho, M. M.
Editor: ******
|
|
|
Relatórios
Info
D1.1: Analysis of past extreme events, lessons learned ans SoA models V1
C2IMPRESS is a multi-disciplinary project which aims to enhance understanding and public awareness on multi-hazard risk, based on innovative models, methods, frameworks, tools and technologies to develop decision-making platforms with a fine-grained spatio-temporal data to better assess impacts, vulnerability and resilience on natural hazards. This Report is the Deliverable 1.1 and belongs to Work Package 1, which is mainly addressed to identify the past climate and physical processes that underlie natural disaster events and their consequences
Ano: 2023
Autor(es): Moragues, A.; Estrany, J.; Alves, E.; Zózimo, A. C.; Leitão, T. E.; Ruiz, M.; Oliveira, M. M.; Sfetsos, A.; Fernandes, T. F.
Info
Demonstration and technical tours plan
A major objective of TRA LISBON 2022 Conference is to boost research and innovation capacity for the transport sector, throughout a full innovation cycle, from idea to market. Having this in view, the project
Ano: 2022
Autor(es): Batista, F. A.; Marecos, V.; Antunes, M. L.; Macedo, A. L.; Freire, A. C.; Capitão, R.; Arsénio, E.; Maia, L.
Info
Demonstration submission and selection guidelines
The demonstration area will be one of the main focus points of TRA LISBON 2022, presenting multifunctional spaces and being prepared to receive a large number of different types of on-site demonstrations (indoor and outdoor). On-line demonstrations will also be an option, allowing for the widest possible coverage of access for all the participants.The dedicated areas will allow for interactive demonstrations of technological innovations to be carried out by and for industry partners, researchers, and other stakeholders. Demonstrations are an excellent opportunity to introduce conference attendees in an engaging way, as well as to promote new contacts and promising business.
Ano: 2022
Autor(es): Freire, A. C.; Arsénio, E.; Macedo, A. L.; Antunes, M. L.; Capitão, R.; Belinha, M.
Info
Technical tours organization criteria and procedures report
According to the CSA project plan, WP5.2 task objective is to organize technical tours that feature attractive and interactive showcases aiming at engaging participants into novel technologies for all transport modes and enabling stakeholders and their companies to disseminate and even sell their products and applications to all interested parties.
Ano: 2022
Autor(es): Capitão, R.; Macedo, A. L.; Arsénio, E.; Antunes, M. L.; Freire, A. C.
Editor: TRA LISBON 2022
Info
Data Repository Rules. Deliverable 10.4
This report is part of HYDRALAB+ Work Package 10, which seeks to strengthen the coherence of experimental hydraulic and hydrodynamic research undertaken by the HYDRALAB+ partner organisations. It outlines the work carried out by Samui Design & Management Ltd, supported by HR Wallingford, in relation to the development of a data repository structure that can be adopted by participants of the HYDRALAB+ project.
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data from physical modeling; Zenodo; Data repository structure
Info
Data Storage Report. RECIPE Task 8.2: Overtopping events in breakwaters under climate change scenarios
Reliable prediction of wave run-up/overtopping and structure damage is a key task in the design and safety assessment of coastal and harbor structures. Run-up/overtopping and damage must be below acceptable limits, both in extreme and in normal operating conditions, to guarantee the stability of the structure and the safety of people and assets on and behind the structure. The mean-sea-level rise caused by climate change and its effects on wave climate may increase the number and intensity of run-up/overtopping events and make the existing coastal/harbor structures more vulnerable to damage.Accurate estimates, through physical modelling, of the statistics of overtopping waves for a set of climate change conditions, are needed. The research project HYDRALAB+ (H2020-INFRAIA-2014-2015) gathers an advanced network of environmental hydraulic institutes in Europe, which provides access to a suite of environmental hydraulic facilities. They play a vital role in the development of climate change adaptation strategies, by allowing the direct testing of adaptation measures and by providing data for numerical model calibration and validation. The use of physical (scale) models allows the simulation of extreme events as they are now, and as they are projected to be under different climate change scenarios.The enclosed dataset refers to the experimental work developed at LNEC within HYDRALAB+ and considers 2D damage and overtopping tests for a rock armor slope, with four different approaches to represent storms. Data of free surface elevation, overtopping and damage is presented.
Ano: 2018
Autor(es): Fortes, C. J. E. M.; Mendonça, A. C.; Lemos, R.; Neves, M. G.; Reis, M. T. L. G. V.; Capitão, R.
Keywords: Climate change; Overtopping; Data repository
Info
Facilitating the re-use and exchange of experimental data. Task 10.1 Critical review. D10.2 Critical Review of data flux between laboratory models, numerical models and field case studies
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.2 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Field data; Numerical modeling data; Physical modeling data; Data flux
Info
Facilitating the re-use and exchange of experimental data. Task 10.2 Data Standards and Licenses. D 10.3 Data Standards Report
The HYDRALAB+ project is aimed at strengthening the coherence of experimental hydraulic and hydrodynamic research undertaken across its partner organisations. This report is D10.3 of the HYDRALAB+ project, entitled
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Neves, M. G.; Capitão, R.; Lemos, R.; Reis, M. T. L. G. V.
Keywords: Data management options; Experimental data; Data formats
Info
Protocols for representing variability and unsteadiness in flume facilities. Deliverable Number 8.2
This deliverable is related to task 8.2
Ano: 2018
Autor(es): Mendonça, A. C.; Fortes, C. J. E. M.; Lemos, R.; Capitão, R.; Neves, M. G.; Reis, M. T. L. G. V.
Keywords: Extreme events; Climate change; Variability in flume facilities
Info
Sistema de previsão, alerta e gestão de riscos causados pela agitação marítima - Relatório inicial Arquitetura e características gerais do sistema para os portos de Madalena do Pico, São Roque do Pi
Neste relatório inicial são apresentadas a arquitetura e as caraterísticas gerais dos protótipos do sistema de previsão, alerta e gestão de riscos causados pela agitação marítima para os portos de Madalena do Pico, São Roque do Pico e Praia da Vitória. Os três protótipos em desenvolvimento têm por base uma arquitetura semelhante, com características distintas, nomeadamente no que respeita à localização dos dados de base, às malhas computacionais utilizadas e às características físicas das fronteiras, tanto no plano horizontal (interface terra-mar), como no vertical (batimetria dos fundos). Caracteriza-se o layout geral dos portos, bem como a sua morfologia e operabilidade.
Ano: 2018
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Reis, M. T.; Poseiro, P.
Keywords: Porto de Praia da Vitória; Porto de São Roque do Pico; Porto de Madalena do Pico; Agitação marítima; Alerta e gestão de riscos; Sistema de previsão
|
|
|
|
|
Outros
Info
Modelo Matemático de Propagação e Deformação de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT),
N/A
Ano: 1998
Número Páginas:
9 p.
Autor(es): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
Relato da missão a Bruxelas (24 a 26 de Março de 1998) para participação na 8ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efectu
N/A
Ano: 1998
Número Páginas:
4 p.
Autor(es): Covas, J. A.
Editor: ******
Info
Relato da missão a Bruxelas (28 a 30 de Outubro de 1998) para participação na 10ª Reunião da Acção Concertada Added Value Services in VTMIS do Programa Comunitário de I&D TRANSPORTS . Relatório efe
N/A
Ano: 1998
Número Páginas:
3 p.
Autor(es): Covas, J. A.
Editor: ******
Info
Short-term stochastic numerical and physical simulation of sea waves - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI, na área científica de Engenharia Civil
N/A
Ano: 1998
Número Páginas:
53 p.
Autor(es): Capitão, R.; Pires Silva, A.; Medina, J. R.; Carvalho, M. M.
Editor: ******
Info
Transformações Não-Lineares de Ondas Marítimas em Zonas Costeiras - Proposta de Projecto de Investigação apresentada ao Programa PRAXIS XXI , na área científica de Engenharia Civil
N/A
Ano: 1998
Número Páginas:
50 p.
Autor(es): Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
Info
V Programa Quadro da União Europeia. Preparação da discussão dos Programas Específicos. Documento de trabalho da Comissão (COM (97) 553 Final). Grupo de Trabalho 6 Sustainable Mobility and Intermod
N/A
Ano: 1998
Número Páginas:
2 p.
Autor(es): Covas, J. A.
Editor: ******
Info
Valores extremos da agitação marítima no Algarve - Proposta de Projecto de Investigação apresentado ao Programa de Intervenção nos Laboratórios do Estado (MCT-FCT), sub-projecto Valorização e Protec
N/A
Ano: 1998
Número Páginas:
11 p.
Autor(es): Carvalho, M. M.; Capitão, R.
Editor: ******
|
Departamento de Hidráulica e Ambiente
