Artigos de Revista
Info
Energy rate balance applied to coastal engineering problems by using RANS-VoF models in numerical wave flumes 
Nowadays, the use of RANS-based models for simulating numerical wave flumes and studying coastal engineering structures is common and allows investigating accurately phenomena that occur in current/wavestructure interactions. Comprehension of energy transformations in these processes can support designers tooptimize the system. In this study, a methodology to evaluate the terms of the energy rate balance in coastalengineering problems is developed. The methodology is applied to the propagation of regular waves in numericalwave flumes, onshore oscillating water column wave energy converter integrated into a vertical breakwater, andtwo types of rubble-mound breakwaters. The direct determination of the energy rate due to viscous and urbulencelosses and the porous resistance in rubble-mound breakwaters are carried out by time integration insidethe computational domain. Besides, the reflected and transmitted energy rates in the flume are calculated bymeans of this methodology, instead of the standard gauge methods, commonly used in physical and numericalflumes. Complementary, studies may be carried out for random incident waves and the methodology can beapplied to 3D wave tanks.
Ano: 2025
Autor(es): Teixeira, P.; Didier, E.
Revista: Ocean Engineering
Editor: Elsevier
Keywords: Rubble-mound breakwater; Oscillating water column wave energy converter; Energy rate balance; Coastal engineering; Numerical wave flume; RANS models
Info
An assessment of 3D scanning methods in physical models
The evaluation of damage progression caused by wave action on physical models of rubble-mound breakwaters can be accomplished through two types of methods: quantifying the movements and falls of the resistant armor elements by visual inspection (the traditional, classical method) or determining the eroded volumes and depths between consecutive surveys of armor layers using sensors and photogrammetric methods (3D scanning methods). Of the latter, one may use techniques such as the so-called "Kinect", "Photogrammetry" and "LiDAR". The end-product of these techniques is, among others, point clouds, which allow obtaining three-dimensional surface models. In this paper, four of the latter techniques (3D scanning methods) are briefly described, and a comparison is made between them regarding their usability in current tests, their advantages and disadvantages, among themselves for a study case of the physical 3D model of the Ericeira breakwater. In evaluating survey quality across the four methods, RMSE (root mean square error) was employed to align obtained point clouds with ground control points (GCP). Notably, Photogrammetry, Kinect, and Azure techniques showed excellent RMSE values. Conversely, the LiDAR-derived-method cloud, using a smartphone with LiDAR sensor and 3dScanner app, fails to yield acceptable and accurate results for the research objectives of this paper.
Ano: 2024
Autor(es): Capitão, R.; Lemos, R.; Fortes, C. J. E. M.; Jónatas, R.
Editor: COSE
Keywords: 3D scans; Reconstruction Techniques; Damage Progression; Breakwater; Physical Modelling
Info
Analytical and numerical modelling of wave dissipation over rigid and flexible vegetation in a flume: Drag coefficient calibration
Data of wave dissipation over vegetation fields was collected from laboratory flume experiments, fordifferent vegetation and wave conditions. An analytical model and a numerical model are applied to estimatethe wave dissipation obtained in the experiments, through the calibration of the bulk drag coefficient (CD).Results and conclusions will analyse and compare each model behaviour and obtained CD values.
Ano: 2024
Autor(es): Reis, R.; Fortes, C. J. E. M.; Suzuki , T.
Editor: IARH EUROPE CONGRESS
Info
Deep Neural Network Enhanced Early Warning System for Ports Operations
Downtime of port terminals results in large economic losses and has a major impact on the overallcompetitiveness of ports. EarlyWarning Systems (EWS) are an effective tool to reduce ports
Ano: 2024
Autor(es): Pinheiro, L.; Fortes, C. J. E. M.; Gomes, A.
Editor: IARH EUROPE CONGRESS
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was to develop, test, and implement an operational coastal erosion early warning system supported by a particular method of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numerical models, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system was developed in two phases. In the development phase, all information required to apply the machine learning method was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosion caused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpact index. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and the height of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated information was built. After the training of the network, the conditional probability tables were created. These tables constituted the ground knowledge to make the predictions in the second phase. This methodology was validated (1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latest considered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through the unbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered the entire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that the Bayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms, depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditions disappeared after predicting potential consequences. Regarding the Regarding the second validation approach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set of varying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Número Páginas:
1-15pp.
Autor(es): Garzon, J.L.; Ferreira, Ó.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
Vol 189 (104460).
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Development of a Bayesian network-based early warning system for storm-driven coastal erosion
Coastal hazards such as flooding and erosion can cause large economic and human losses. Under this threat, early warning systems can be very cost-effective solutions for disaster preparation. The goal of this study was todevelop, test, and implement an operational coastal erosion early warning system supported by a particularmethod of machine learning. Thus, the system combines Bayesian Networks, and state-of-the-art numericalmodels, such as XBeach and SWAN, to predict storm erosion impacts in urbanized areas. This system wasdeveloped in two phases. In the development phase, all information required to apply the machine learningmethod was generated including the definition of hundreds of oceanic synthetic storms, modeling of the erosioncaused by these storms, and characterization of the impact levels according to a newly defined eerosion iimpactindex. This adimensional index relates the distance from the edge of the dune/beach scarp to buildings and theheight of that scarp. Finally, a Bayesian Network that acted as a surrogate of the previously generated informationwas built. After the training of the network, the conditional probability tables were created. These tablesconstituted the ground knowledge to make the predictions in the second phase. This methodology was validated(1) by comparing 6-h predictions obtained with the Bayesian Network and with process-based models, the latestconsidered as the benchmark, and (2) by assessing the predictive skills of the Bayesian Network through theunbiased iterative k-fold cross-validation procedure. Regarding the first comparison, the analysis considered theentire duration of three large storms whose return periods were 10, 16, and 25 years, and it was observed that theBayesian Network correctly predicted between 64% and 72% of the impacts during the course of the storms,depending on the area analyzed. Importantly, this method was also able to identify when the hazardous conditionsdisappeared after predicting potential consequences. Regarding the Regarding the second validationapproach, second validation approach, the k-fold cross-validation procedure was applied to the peak of a set ofvarying storms and it demonstrated that the predictive skills were maximized (63%
Ano: 2024
Autor(es): Garzon, J.L.; Ferreira, O.; PLOMARITIS, T.A.; Zózimo, A. C.; Fortes, C. J. E. M.; Pinheiro, L.
Revista: Coastal Engineering
Editor: Elsevier
Volume:
189 (2024) 104460.
Keywords: HIDRALERTA; Sandy beaches; Bayesian networks; Numerical modeling; Prediction system
Info
Experimental investigation of wave severity and mooring pretension on the operability of a moored tanker in a port terminal
This paper investigates the influence of sea severity and mooring line pretension configuration on the operabilityof a moored vessel at a modified berthing site inside a port. A physical model was constructed to replicate thenew layout of the port of Leix
Ano: 2024
Autor(es): Abdelwahab, H.S.; Pinheiro, L.; Santos, J. A.; Fortes, C. J. E. M.; Guedes Soares, C.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
291 (2024) 116243.
Keywords: Mooring pretension; Moored ship; Ship motions; Port downtime; Ship operability; Physical modelling
Info
Experimental study of an onshore dual chamber oscillating water column device
A wave flume is used to study a scaled model of a stepped bottom dual-chamber Oscillating Water Column (OWC) installed onshore. Compared to traditional single-chamber OWCs, the use of dual-chambers is expected to widen the range of sea states in which the OWC is more efficient, and the step, in front of the first chamber, boosts the capturing energy capacity of the device. The Power Take-Off (PTO) system is modelled as an air opening in the pneumatic chambers. Several experiments combining regular incident waves and PTO damping conditions are performed. Results of the amplitudes of the free surface elevations inside the chambers show that the device can amplify the incident wave amplitude up to 1.57 times in chamber 2. Results of the primary efficiency show that the device is highly dependent on the PTO damping characteristics and can reach around 40% for a wide range of wave periods. Results of the reflection analysis show that the reflection coefficient is also dependent on the PTO damping characteristics but remain lower than 0.6 for all the studied cases. Sloshing phenomenon (mostly in the cross-section direction) was observed for a wavelength close to the cross-section dimension, impacting negatively on the device pneumatic performance.
Ano: 2024
Número Páginas:
16p..
Autor(es): Gadelho, J.; REZANEJAD, K.; Guedes Soares, C.; Santos, J. A.; Anastas, G.; Fortes, C. J. E. M.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 300 (117240).
Keywords: Reflection coefficients; Efficiency improvement; Breakwater; Experiments; Oscillating water column
Info
Experimental study on drag coefficient of flexible vegetation under non-breaking waves
Laboratory experiments of wave propagation over rigid and flexible vegetation fields, with the same configurations, were conducted to understand the effect of vegetation flexibility on the drag coefficient (CD). The direct method and the least squares method (LSM), based on force and flow measurements, are applied to calculate the CD in the experimental conditions. The formulations of both methods are extended to estimate the CD for flexible vegetation cases. A video analysis was performed to account for the swaying motion. Typically, wave dissipation is lower for flexible than for rigid vegetation of the same configuration, under the same flow condition. Therefore, a proportional effect in the corresponding CD results, obtained from common CD calibration to wave dissipation without considering vegetation motion, is usually observed. However, the present results show that although the wave dissipation was 34% lower for flexible relative to rigid vegetation, the respective CD values were close. CD estimations considering vegetation motion and inertia suggest that CD of flexible vegetation was up to 13% higher relative to rigid vegetation. Accounting for inertia reduced the CD for rigid vegetation up to 7%, while raised the CD for flexible vegetation up to 13%.
Ano: 2024
Número Páginas:
14p..
Autor(es): Reis, R.; Fortes, C. J. E. M.; Rodrigues, J.; HU, Z.; Suzuki , T.
Revista: Ocean Engineering
Editor: Elsevier
Volume:
Volume 296.
Keywords: Wave dissipation; Inertia; Vegetation motion; Flexible vegetation; Drag coefficient
Info
Exploring Wave
Aquatic vegetation in the littoral zone plays a crucial role in attenuating wave energy andprotecting coastal communities from hazardous events. This study contributes to the developmentof numerical models aimed at designing nature-based coastal defense systems. Specifically, a novelnumerical application for simulating wave
Ano: 2024
Autor(es): El Rahi, J.; Martinez-Estevez, I.; Reis, R.; Tagliafierro, B.; Dominguez, J.M.; Crespo, A.J.C.; Stratigaki, V.; Suzuki, T.; Troch, P.
Editor: MDPI
Keywords: Project chrono; DualSPHysics; SPH-FEA coupling; Fluid
|
Comunicações
Info
Analytical and numerical modelling of wave dissipation over rigid and flexible vegetation in a flume: Drag coefficient calibration
Coastal vegetation can contribute to protect the coasts from sea wave action, as controlling local biology and morphodynamics. A common way to estimate the wave energy dissipation over vegetation is to use the Mendez and Losada (2004) analytical formulation in combination with the calibrated bulk drag coefficient parameter (CD). However, an excessive range of CD values is found in the literature related to same Reynolds (Re) or Keulegan-Carpenter (KC) numbers. This may be due to a lack of universality of the empirical equations proposed and/or limitations of the analytical model. The numerical model SWASH (Zijlema et al., 2011) characterises wave dissipation over vegetation fields (Suzuki et al., 2019, 2022; Reis et al., 2020) considering the influence of the drag, inertia, and porous effects on cylindrical structures. Potentially, SWASH offers enhanced capacities to describe the physical processes involved and to calibrate associated CD values. Wave dissipation over vegetation data was collected by performing laboratory flume experiments, enabling an ideal control of the study conditions. The analytical formulation and the SWASH numerical model are applied to estimate the wave dissipation obtained in the experiments, through the calibration of the CD.The objective of this study is to investigate: i) how the analytical and SWASH models can represent the experimental wave dissipation, and ii) the calibrated CD values obtained from each modelling approach.
Ano: 2024
Autor(es): Reis, R.; Fortes, C. J. E. M.; Suzuki, T.
Editor: IARH
Info
Deep Neural Network Enhanced Early Warning System for Ports Operations
Downtime of port terminals results in large economic losses and has a major impact on the overall competitiveness of ports. Early Warning Systems (EWS) are an effective tool to reduce ports
Ano: 2024
Autor(es): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.
Editor: IARH EUROPE CONGRESS
Info
Exploring Wave-Vegetation Interaction At Blade Scale: A Comprehensive Analysis Of A Flexible Cylinder Through Experimental Data And A Direct Numerical Simulation
Aquatic vegetation in the littoral zone, particularly seagrass, is gaining increasing recognition for its net positive impact on the hosting environment. This recognition is rooted in its capacity to absorb wave energy, regulate water flow, and manage nutrient levels, sedimentation and accretion. Thus, there is a growing interest in integrating seagrass as a key component of a comprehensive climate-conscious strategy (Ondiviela et al., 2014). An effective approach to quantify the positive potential of seagrasses in altering coastal wave dynamics is by using numerical models. These numerical models operate at various spatio- temporal scales, ranging from large domains and multiple years to just a few regular waves in high resolution CFD numerical simulations. Zeller et al. (2014) classified these models, operating at different scales into three categories, each addressing the wave-vegetation interaction at a distinct scale: (1) blade scale, (2) meadow scale, and (3) ecosystem scale. The aim of the present study is to investigate the interaction between waves and vegetation at the blade scale. The primary objectives are two: first, to introduce a direct numerical technique that involves a two-way coupling between a fluid solver and a structural solver, and second, to present novel experimental data for a single flexible cylinder (Reis, 2022) serving as validation for the present (and future) numerical model(s).
Ano: 2024
Autor(es): El Rahi, J.; Reis, R.; Martinez, E.; Tagliafierro, B.; Dominguez, J.M.; Crespo, A.J.C.; Stratigaki, V.; Suzuki, T.; Troch, P.
Editor: CoastLab24
Keywords: DualSPHysics; Direct numerical modell; Flexible vegetation; Wave-vegetation interaction
Info
Hidralerta: Emergency Response Module for Coastal Wave Overtopping and Flooding at Praia da Vitória bay
The present work describes the developments done so far to the Praia da Vitoria coastal region under the LIFEGARACHICO project, namely the implementation of module on HIDRALERTA early warning system foremergency response to coastal waver topping and flooding at Praia da Vitória bay.
Ano: 2024
Autor(es): Fortes, C. J. E. M.; Pinheiro, L.; Zózimo, A. C.; Lima, L.; Serrazina, V.
Editor: IARH EUROPE CONGRESS
Info
HIDRALERTA: Emergency Response Module for Coastal Wave Overtopping and Flooding at Praia da Vitória bay
The present work describes the developments done so far to the Praia da Vitoria coastal region under the LIFE-GARACHICO project, namely the implementation of module on HIDRALERTA early warning system for emergency response to coastal waver topping and flooding at Praia da Vitória bay.
Ano: 2024
Autor(es): Fortes, C. J. E. M.; Pinheiro, L.; Zózimo, A. C.; Lima, L.; Serrazina, V.
Editor: IARH
Info
Melhoria das Acessibilidades Marítimas do Porto de Aveiro: Hidrodinâmica e Dinâmica Sedimentar
O acesso marítimo ao Porto de Aveiro apresenta problemas de navegabilidade que condicionam a entrada de navios de grande dimensão, em particular em algumas situações de maré e agitação marítima. Este estudo apresenta e avalia uma configuração alternativa para a embocadura da Ria de Aveiro que visa mitigar estes problemas.
Ano: 2024
Autor(es): Fortunato, A. B.; Azevedo, A.; Oliveira , F.; Portela, L. I.; Pinheiro, L.
Editor: MEC2024
Keywords: SCHISM; Morfodinâmica; Hidrodinâmica; Modelação numérica
Info
MELHORIA DAS ACESSIBILIDADES MARÍTIMAS DO PORTO DE AVEIRO: HIDRODINÂMICA E DINÂMICA SEDIMENTAR
O acesso marítimo ao Porto de Aveiro apresenta problemas de navegabilidade que condicionam a entrada de navios de grande dimensão, em particular em algumas situações de maré e agitação marítima. Este estudo apresenta e avalia uma configuração alternativa para a embocadura da Ria de Aveiro que visa mitigar estes problemas.
Ano: 2024
Autor(es): Fortunato, A. B.; Azevedo, A.; Oliveira , F.; Portela, L. I.; Pinheiro, L.
Editor: MEC
Keywords: SCHISM; Morfodinâmica; Hidrodinâmica; Modelação numérica
Info
Quantifying Ship Impact Loads on Fenders: Experimental Approach
Docking large vessels is a delicate operation as the kinetic energy associated with the large mass of the vessel can result in high impact forces that can damage the vessel, fenders or even the quay. Berthing loads are usually quantified using design formulae based on kinetic energy and a single point of impact. Some correction factors are then used to consider the hydrodynamic mass, the ship
Ano: 2024
Autor(es): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Manso, J.; Marcelino, J.
Editor: CRC Press
Info
Quantifying ship impact loads on fenders: Experimental approach
Docking large vessels is a delicate operation as the kinetic energy associated with the large mass of the vessel can result in high impact forces that can damage the vessel, fenders or even the quay. Berthing loads are usually quantified using design formulae based on kinetic energy and a single point of impact. Some correction factors are then used to consider the hydrodynamic mass, the ship
Ano: 2024
Autor(es): Pinheiro, L.; Gomes, A.; Fortes, C. J. E. M.; Manso, J.; Marcelino, J.
Editor: CRC Press
Info
Risk Perception of Coastal Flooding in Praia da Vitória, Azores
This communication describes the methodologies applied in the conception, implementation, andanalysis of a set of surveys on the risk perception of coastal flooding, carried out in the community ofPraia da Vitória (Azores, Terceira Island, Portugal).This work is part of the project LIFE-GARAC HICO* (LIFE20 CCA/ES/001641), whose objectiveis to create a Flexible Adaptation Strategic Framework for the coastal municipalities of Macaronesia, toincrease the resilience of these areas in face of current and future (considering climate change impacts)coastal extreme events. The project follows a co-participatory approach, to promote awareness amongthe population and increase reliability in coastal risk management. Indeed, involving all the existentstakeholders is the first step in promoting a democratic risk management, which in the end, leads to aresilience increase, in the face of global warming conditions.
Ano: 2024
Autor(es): Lima, L.; Fortes, C. J. E. M.; Zózimo, A. C.; Pinheiro, L.
Editor: RISCOS
Keywords: Risk perception; Praia da Vitória; Life-Garachico
|
|
|
Capítulos de Livros
Info
Multi-functional artificial reefs for coastal protection
N/A
Ano: 2009
Número Páginas:
153-210 pp.
Autor(es): Voorde, M.; Antunes do Carmo, J.; Neves, M. G.
Editor: Ch. A. Hudspeth, T. E. Reeve
|
Teses de Doutoramento
Info
Trapped-mode propagation along irregular coasts
N/A
Ano: 1999
Número Páginas:
159 p.
Autor(es): Santos, J. A.
Editor: ******
Info
Probabilistic Assessment of the Safety of Coastal Structures
N/A
Ano: 1998
Número Páginas:
594 p.
Autor(es): Reis, M. T.
Editor: ******
Info
Unsteady Nearshore Currents on Longshore Varying Topographies
N/A
Ano: 1998
Número Páginas:
346 p.
Autor(es): Sancho, F. E.
Editor: ******
Info
Simulação da agitação irregular. Técnicas matemáticas
N/A
Ano: 1973
Autor(es): Carvalho, M. M.
Editor: ******
|
|
|
Relatórios
Info
Central térmica de Sines - tomada da água. Ensaios de agitação e correntes de uma solução variante tipo-porto (1.º relatório).
N/A
Ano: 1981
Autor(es): Clímaco, M.; J.A Covas
Info
Central térmica de Sines. Estabilidade dos molhes de protecção.
N/A
Ano: 1981
Autor(es): Vera-Cruz, D.
Info
Ensaios em modelo reduzido do porto de Viana do Castelo. Ensaios de estabilidade da cabeça do molhe
N/A
Ano: 1981
Autor(es): Pita, C. A.
Info
Espraiamento de ondas regulares sobre taludes de obras marítimas.
N/A
Ano: 1981
Autor(es): GOMES, F. V.
Info
Estudo comparativo em modelo matemático e em modelo reduzido da agitação marítima na zona do molhe oeste de Sines.
N/A
Ano: 1981
Autor(es): Pita, C. A.; Covas, J. A.
Info
Estudo em modelo reduzido do Estuário do Sado. Contribuição para o estudo da agitação marítima na zona do gerador de vagas.
N/A
Ano: 1981
Número Páginas:
5pp.
Autor(es): Covas, J. A.
Info
Estudo em modelo reduzido do estuário do Sado. Contribuição para o estudo da agitação marítima na zona do gerador de vagas. LNEC, Lisboa, Janeiro de 1981.
N/A
Ano: 1981
Autor(es): Covas, J. A.
Info
Hydraulic tests of Sines west breakwater
N/A
Ano: 1981
Autor(es): Pita, C. A.
Info
Hydraulic tests of Sines west breakwater.
N/A
Ano: 1981
Autor(es): Pita, C. A.
Info
Modelação estocástica da agitação marítima. Texto da cadeira do mesmo nome do curso de pós-graduação em Engenharia Oceânica na COPPE, Universidade Federal do Rio de Janeiro, Brasil,
N/A
Ano: 1981
Autor(es): Carvalho, M. M.
|
|
|
|
|
Outros
Info
Porto Santo Island. Wave Characterization and propagation. poster apresentado ao International Coastal Symposium (ICS 04)
N/A
Ano: 2004
Autor(es): Fortes, C. J. E. M.
Editor: ******
Info
Probabilistic Assessment of Hazards from Overtopping of Seawalls in Urban Environments: Annual report of Post-Doctoral Research.
N/A
Ano: 2004
Autor(es): Reis, M. T. L. G. V.
Editor: ******
Info
Software do Núcleo de Portos e Estruturas Marítimas
N/A
Ano: 2003
Autor(es): NPE, Núcleo
Editor: ******
Info
River Information Services. PIANC s Technical Brief on vessel traffic and transport management in inland waterways and modern information systems
N/A
Ano: 2002
Autor(es): J.A Covas
Editor: ******
Info
Vessel Traffic and Transport Management in the Inland Waterways and Modern Information Systems
N/A
Ano: 2002
Autor(es): J.A Covas
Editor: ******
Info
MEDIRES - Ferramentas de Diagóstico e de Inspecção Robotizada de Estruturas Semi-Submersas
N/A
Ano: 2001
Autor(es): Santos, J. A.; Silvestre, C.
Editor: ******
Info
Observação Sistemática de Obras Marítimas. Súmula da actividade desenvolvida pelo LNEC
N/A
Ano: 2001
Autor(es): Silva, L. G.; Santos, J. A.; Neves, M. G.; Damião, A. D.
Editor: ******
Info
Protecção da Orla Costeira da Vila das Lajes do Pico. Relatório do Grupo de Trabalho para Definição e Análise de Soluções Alternativas
N/A
Ano: 2001
Número Páginas:
20 p.
Autor(es): Oliveira, J. M. M.; Silva, L. G.; Azevedo, J. M.
Editor: ******
Info
Software do Núcleo de Portos e Praias
N/A
Ano: 2001
Autor(es): NPE, Núcleo
Editor: ******
Info
Solução Vectorizável e Parelelizável de Sistemas de Equações de Grande Dimensão Proposta para passagem à 2ª fase do projecto, financiado pela FCT, no âmbito dos Programas Operacionais Ciência, Tecnol
N/A
Ano: 2001
Autor(es): Fernandes, J. L. M.; Covas, J. A.; Fortes, C. J. E. M.
Editor: ******
|
Departamento de Hidráulica e Ambiente
