Publicações

The goal of this paper is to simulate the interaction of stress waves and rock fractures in a particle micromechanical model. Stress waves travelling in fractured rock masses are slowed down and attenuated by natural heterogeneities, voids, microcracks and, above all, by faults and fractures. Considerable laboratory and theoretical investigation have uncovered the major aspects of this phenomenon, but models that cover the core mechanisms of the wave propagation in rock masses are necessary to investigate aspects of wave

O método dos elementos discretos adoptando partículas para discretização dodomínio tem sido utilizado no estudo do fenómeno da fractura em meios nãohomogéneos, como o betão e a rocha. Neste artigo, é proposto um modelo de análisepara o betão armado no qual as armaduras são modeladas com elementos rígidosunidimensionais ligados por molas. Os elementos rígidos interagem com o betão,modelado por partículas circulares, através de uma interface de contacto. O modelo évalidado com base em ensaios de flexão em viga a três pontos e a quatro pontos,sem armaduras de esforço transverso. No ensaio de flexão a 3 pontos o modelo dáuma boa aproximação do comportamento real em termos do processo de evolução dafractura e da relação carga-deslocamento. No ensaio de flexão a 4 pontos, verifica-seuma boa correlação com os resultados experimentais, nomeadamente o valor dacarga última, o efeito de escala e a evolução do processo de fractura.

The overcoring method for measuring in situ stresses is frequently used in rock engineering projects. Most models for its interpretation assume that the rock is homogeneous, linear elastic and isotropic. The elastic constants are determined by various methods, namely by biaxial tests on the recovered core.A three-dimensional finite element model was developed, which allows to compute the stress state from the strain measurements obtained during overcoring, assuming a transversely-isotropic behaviour of the rock mass. Different testing methodologies for elastic constants determination of anisotropic rocks are introduced and discussed. Several numerical tests were performed to analyse the influence of the weakness planes that sometimes occur in the rock core owing to the tensile strains that are generated during the biaxial test. To avoid the tensile strains in the biaxial test, a new triaxial testing procedure of the overcored rock sample with the cell was developed. The effect of the degree of rock anisotropy on in situ stress determination and the error involved in neglecting rock anisotropy are analysed. Differences on the principal stresses and principal directions calculated considering the usual isotropic model and the developed numerical model for a real case of anisotropic rock are presented.

Micromechanical modelling based on the Discrete Element Method (DEM) has been widely used to investigate asphalt behaviour due to its ability to represent an irregular microstructure with variable-sized aggregates, bitumen and voids. The 3D rigid particle models with randomly distributed spherical particles and adopting elastic and/or simple viscoelastic models at the contacts are the standard approach, however, in recent years, a significant research effort is noted to incorporate real particle morphologies in the numerical models.In this study, a previously developed 3D DEM model of asphalt employing a generalised Kelvin contact model formulation for the viscoelastic contacts is further improved with realistic particle shapes representing the coarse aggregates. A digital library of aggregate shapes was created from the X-ray computed tomography (CT) scan of an asphalt specimen, using an adaptive image-processing method to separate the aggregates in the CT images and the Delaunay triangulation method to define the aggregate 3D surface model. Several virtual aggregates with different sizes were selected from the library to represent the coarse aggregate gradation of the modelled 3D DEM asphalt specimen. Each virtual aggregate is discretized with smaller spherical particles and its deformability is taken into account through the inner particle contacts. The numerical asphalt specimens with realistic particle shapes were submitted to uniaxial tension-compression cyclic tests to determine the stiffness properties, and the results were compared with those of the numerical specimens with all constituents represented by single spherical rigid particles. As shown, the proposed methodology greatly enhances the 3D DEM model's ability to simulate the asphalt behaviour.

A avaliação da resposta dinâmica das obras e o acompanhamento da evolução do seu comportamento durante as várias fases da vida é muito importante, estando inserida nas atividades do controle de segurança estrutural. A barragem do Baixo Sabor possui sistemas de monitorização dinâmica em continuo e sísmica, tendo sido realizados dois ensaios de vibração forçada para duas cotas de albufeira. Foram desenvolvidos modelos numéricos incorporando o conjunto barragem-fundação-albufeira, calibrados com os resultados experimentais. Apresentam-se os resultados dos modelos numéricos desenvolvidos para vários níveis da albufeira comparando com a monitorização, durante a operação normal e a ocorrência de eventos sísmicos, verificando-se uma boa concordância.

The Baixo Sabor dam is a 123 meters high concrete arch dam located in the north of Portu-gal. After the performance of a forced vibration test, a quite unique experimental programme was initiated in the dam during the first filling of the reservoir, with the installation of a con-tinuous dynamic monitoring system in December 2015. The implementation of such a system aimed to study the evolution of the dam

Stability analysis of rock slopes is an exercise that poses a variety of challenges to arock engineer. Field information is often lacking and subjective modelling of the rock mass isrequired. Expert judgment also influences the quantification of the targeted safety level, reflectingthe confidence of the designer in his own assumptions and hypothesis. With the introduction of theEN1997 in Europe, structural reliability concepts were brought to the design of geotechnicalstructures, now also including rock masses after its current revision. Yet, fully-probabilistic methodsare still considered valid alternatives to the partial safety method recommended there. Understandinghow to address rock engineering problems from a probabilistic perspective becomes essential tomove beyond the traditional practice. In this study, a simple problem relating to the stability of a rockslope is explored. Limit states for foreseeable failure mechanisms are defined and the systemreliability problem is formulated and solved.

O artigo considera um caso de estudo intencionalmente simples

The Castelo do Bode hydraulic tunnel is part of the Lisbon water supply system. During its con-struction a monitoring system was implemented, aiming at monitoring the behaviour of the con-crete tunnel lining and of the surrounding rock mass, and including visual inspections.This work presents the monitoring system and introduces the relevant aspects of the analysis of the tunnel lining behaviour, based on the observed structural response to the imposed actions, namely the hydrostatic internal and external pressures, thermal variations, contact pressures and time effects. Two types of models are used: i) a structural model, based on axisymmetric analyt-ical solutions of concentric permeable rings allows setting a reference situation from which it is possible, by comparison, to assess the tunnel

This paper presents the analysis, interpretation and prediction of the structural behavior of CahoraBassa dam, which concrete is affected by a moderate ongoing swelling process, of the alkali-silica (ASR)type. To estimate the evolution of the dam

Uma das técnicas de reforço usadas na reabilitação e reforço estrutural de paredes deedifícios antigos em alvenaria de pedra é o confinamento transversal simples através deelementos de aço fixados perpendicularmente à parede. Neste estudo apresenta-se osresultados numéricos da simulação de ensaios de compressão simples de paredes reforçadoscom esta técnica, utilizando um modelo de partículas 2D (MP-2D). Os estudos numéricosapresentados demonstram que os modelos do tipo MP-2D apresentam uma boa concordânciacom ensaios experimentais, nomeadamente no acréscimo do valor máximo em compressãosimples. Demonstra-se assim, que os modelos MP-2D podem ser adotados nodesenvolvimento de soluções de reforço deste tipo, nomeadamente na definição dascaracterísticas das barras, posicionamento e quantificação.

This paper presents the study of the influence of temperature and stress field seasonal variations in thedevelopment of concrete swelling in dams, considering the case study of Covão do Meio arch dam, inPortugal, which concrete is affected by a moderate ongoing swelling process, of the alkali-silica (ASR)type, and which reservoir empties every year in the dry season.In a first step, a three-dimensional model of the dam and of the rock mass foundation, solved by thefinite element method, was used for the interpretation of the dam

A barragem do Covão do Meio, localizada na vertente sul da serra da Estrela a uma altitudede 1650 m, é uma estrutura em abóbada com 28 m de altura máxima cujo betão está afetadopor reações expansivas de moderada magnitude, do tipo álcalis-sílica.Para interpretar o comportamento observado da barragem e os efeitos estruturais dasexpansões, desenvolveram-se modelos de elementos finitos da obra, nas vertentes estruturale térmica, tendo os resultados da modelação apresentado uma boa concordância comresultados da observação contínua. Numa segunda fase foi feita a previsão docomportamento da obra para um horizonte temporal de 20 anos, tendo em conta dois cenários,um otimista, em que as expansões estabilizam a médio prazo com valores finais moderados,e um pessimista, em que o potencial remanescente de expansão é mais significativo.

Masonry is a combination of units such as stones, bricks or blocks usually laid in a cementitious or limemortar. It is probably the oldest material used in construction and has proven to be both simple to buildand durable. Over the years, existing masonry constructions have inevitably suffered damage with time.Earthquakes, soil settlements, material degradation and lack of maintenance are the main reasons forthat. Careful and periodic assessment of such structures is necessary in order to evaluate their structuralcapacity and safety levels. However, performing the structural analysis of masonry construction is notan easy task. A review is presented of the main models based on the discrete element method and the available related numerical techniques that have been proposed for the analysis of masonry. The essential assumptions adopted by these models and numerical implementation issues are discussed. Differences between available models are illustrated by applications to various masonry problems including static and dynamic analysis of masonry arch bridges, walls, vaults, domes and ancient colonnades.This book is composed of 17 chapters authored/co-authored by 25 outstanding researchers from 11countries (Canada, France, Greece, Hungary, Iran,Italy, Mexico, Norway, Portugal, UK, USA), whichwere reviewed by 60 referees.

N/A

This chapter consists of two parts. First a general overview is given: the exact definition of the Discrete Element Method is provided, and the main types of existing models are introduced; then the theoretical fundaments of the most important approaches available today for masonry analysis are given. The second part of the chapter focuses on 3DEC, the most widespread commercial DEM code for masonry analysis. This second part begins with a theoretical overview. Application issues for masonry structures are then considered (block material behaviour, contact representation, structural elements like cables or bars etc.). Among the practical examples arches, barrel vaults, walls, coloumns and complete structures (like houses) are presented, including the issues of quasi-static versus dynamic analysis and of block fracture as well. The readers can find helpful advice on how to simulate their own problems most effectively.

N/A

Discrete element models have become a major tool for masonry analysis, allowing a suitable representation of its discontinuous nature and marked nonlinear behaviour. The chapter reviews the fundamental assumptions of the main DEM formulations available. It focuses more specifically on the widely used UDEC and 3DEC codes, explaining their relation with the other approaches, and the most relevant issues arising in their application to masonry. Applications to the main types of structures are reviewed, considering both static and dynamic analyses. Recent research providing comparisons of the numerical models with experimental and field data is particularly covered. The discussion of the different examples is aimed at clarifying the key capabilities of DEM and demonstrating the most effective ways of using it in a variety of masonry analysis situations.

This chapter is focused on the Portuguese experience on the developmentand exploration of systems for continuously monitoring dam vibrations, usingaccelerometers. The pioneer system for seismic and structural health monitoring(SSHM) installed in Cabril dam (the highest Portuguese arch dam: 132 m high) isdescribed in detail. The design of this system was the result of a long-term LNECresearch program, still ongoing. These monitoring systems should include softwaredeveloped to automatically perform the analysis of collected data, including theautomatic comparison with numerical results from 3DFE models. In view of thegood results obtained with the system in operation in Cabril dam since 2008, similarsystems have been installed in other large dams in Portugal, particularly in recentlybuilt dams. Finally, Baixo Sabor dam is presented as an example of a new Portuguesedam with a complete SSHM system, in operation since 2015. Themain experimentalresults obtained for both dams are shown, namely the evolution of natural frequenciesover time, mode shapes and the measured seismic response to earthquake events.

Para verificação do cumprimento das exigências de segurança das barragens,tanto relativamente à funcionalidade (cenários correntes), como em relação àsegurança ao colapso (cenários de rotura), é essencial utilizar modelos de simulação oude interpretação (no caso de obras existentes) do seu comportamento. Estes modelossão idealizações (simplificações) da realidade, tanto no que diz respeito às acções(modelos das acções), como no que respeita à componente estrutural (modelos estruturais).A solução destes modelos, através de adequados métodos de análise, quantificaparâmetros da resposta das estruturas que permitem avaliar a sua segurança, utilizandocritérios de segurança previamente definidos.A validação destes modelos pode ser feita, no caso de cenários correntes,através da sua comparação com os resultados da observação do comportamento debarragens. No caso de cenários de rotura, não existe muita experiência de comparaçãodestes resultados com situações reais: é pequeno o número de acidentes ocorrido e,mesmo nestes, o volume de informação é reduzido. Desta forma, o recurso a métodosexperimentais, para o estudo de cenários de rotura, tem uma importância acrescida.Assim o principal objectivo deste trabalho é contribuir para melhorar a capacidade deavaliação da segurança de barragens de betão envolvendo cenários de rotura pela fundação.Neste trabalho desenvolveram-se dois ensaios experimentais em modelosfísicos: um primeiro envolvendo uma barragem abóbada, para o estudo de cenários derotura da fundação para acções estáticas; e um segundo de uma barragem gravidadeensaiado em mesa sísmica, com vista a estudar a rotura pela fundação para acçõesdinâmicas.A previsão e interpretação dos ensaios foram efectuadas com modelosmatemáticos adequados, que permitiram a sua validação e posterior utilização no estudode outros cenários.

A brief description of the phenomena and problems associated with underground structures in hydraulic projects is presented, namely in what concerns the powerhouses, surge chambers and pressure tunnels and shafts. An analysis of the calculation methodologies followed in the structural design of this works is presented, as well as of the numerical models usually adopted, namely finite and boundary element models. Finally, some applications of computational mechanics are presented. First, a parameter study for underground powerhouses, with special emphasis in the definition of shapes, existence of several caverns,and in the tridimensional equilibria is described. Afterwards, examples of application to some hydraulic projects are illustrated: a large underground powerhouse in Mozambique, the Alto Lindoso hydroelectric power scheme in construction in the north of Portugal, and the Castelo do Bode tunnel, in operation, integrated in the water supply system to Lisbon.

O presente trabalho aborda a origem do estado de tensão interna dos maciços rochosos e apresenta os factores que o influenciam. Apresentam-se as técnicas e a aparelhagem correntemente utiiizada na determinação do estado de tensão, bem como a interpretação dos ensaios mais comuns, dando-se maior relevo aos ensaios com macacos planos pequenos (S F J) e com o extensómetro tridimensional (S T T),efectuados correntemente pelo LNEC.

Descreve-se sucintamente uma técnica para amostragem linear de descontinuidades em faces expostas de maciços rochosos e referem-se métodos para tratamento dos dados de campo com vista à definição defamílias de descontinuidades e caracterização de uma forma estatística da sua orientação, espaçamento e extensão. Apresentam-se os resultados obtidos para o caso de uma galeria subterrânea no aproveitamentohidroeléctrico do Alto Lindoso. Para as famílias de descontinuidade identificadas apresenta-se um estudo dos blocos tetraédricos que se poderão formar nas diferentes faces de rocha e analisam-se as suas condições de estabilidade.

N/A

Apresentam-se, neste relatório, modelos numéricos baseados no método dos elementos da fronteira, desenvolvidos no LNEC para análise de estruturas subterrâneas. Tecem-se algumas considerações sobre o método dos elementos de fronteira, descrevem-se os modelos desenvolvidos para equilíbrios planos e tridimensionais e apresentam-se alguns exemplos de aplicação.

N/A

N/A

N/A

This document presents a back analysis procedure for identification of the elastic parameters of transversely isotropic rock cores, containing an overcoring triaxial strain probe, from the strains measured during a biaxial test. A three-dimensional finite element model was developed to simulate the biaxial test on the overcored rock specimen and to compute the strains at the location of the strain gauges. Different optimisation algorithms were tested and the most suitable one was selected. The back analysis procedure was tested for identification of the five elastic parameters and the two orientation angles that characterise a transversely isotropic rock core. In spite that, with the developed methodology, convergence was reached and all those parameters could be identified, sensitivity analyses demonstrated that the results obtained were not stable and therefore they were not reliable. By introducing constrains based on common practice and previous experience, a stable and robust methodology was achieved: the three elastic parameters, E1, E2 and ?2, are reliably identified using the value of G2 calculated with Saint-Venant’s expression and a fixed value of ?1, while the orientation parameters are obtained from observation of overcored rock. Analysis of the results shows that application of this methodology represents an enormous step forward when compared with the traditional use of isotropy. Besides, the methodology is general and can also be used with other types of overcoring equipment. The five elastic parameters and the two orientation angles obtained can then be used, together with the overcoring strains, to compute the complete in situ state of stress.

This document presents the work developed by the PhD student Margarida Espada in the scope of the course unit Risk Analysis in Geotechnical Works of the Doctoral Program in Civil Engineering of the Faculty of Engineering of the University of Porto (FEUP). This work presents a reliability analysis, using the response surface method (RSM), for the case study of the left bank excavation slopes of the Baihetan arch dam foundation, which is one of the case studies of Margarida Espada's PhD thesis. The aim was to approximate an implicit limit state function by computing safety factors, using a discrete element model of the Baihetan left bank developed in 3DEC software, where the shear strength parameters of two important rock discontinuities were considered as random variables. The probability of failure was then obtained through an iterative process, using approximation methods. This work presents the 3DEC model developed to analyse the stability conditions in the Baihetan left bank and the results of the reliability analysis.

O problema da solução das equações de Navier Stokes é abordado neste trabalhopropondo-se uma técnica de representação das incógnitas deslocamentos e pressõesvariáveis no espaço e no tempo em série de Delta de Dirac e suas derivadas no tempocujos coeficientes se determinam com base na solução de sistemas de equaçõesdiferenciais definidos no espaço (problema com três variáveis espaciais independentesque pode ser estudado pelo método de Monge).

Neste relatório apresentam-se as equações básicas da elastodinâmica linear, as soluçõesfundamentais e o teorema da representação no domínio de tempo e de frequência.Para movimentos finitos de casca formula-se o teorema dos trabalhos virtuais e a suaimplementação pelo método dos elementos finitos.

Neste relatório apresentam-se os principais aspectos da modelação sísmica de barragensabóbada. Assim propõe-se: modelos numéricos de geração de sismos por uma falha; aforma como o sismo actua na barragem; modelos para estudar a influência da albufeirana vibração do conjunto; métodos para solução das equações do movimento; e novasformulações de elementos finitos para o problema estrutural.

In pressure tunnels and shafts, in addition to the mechanical effect that excavation has on the rock mass and the disturbance that it introduces in the water flow, also the contained water can interact from the mechanical and hydraulic points of view with the rock mass. Seepage in fractured rock masses is dominated by the flow that takes place through the joints, and this is highly d(;pendent on their properties, namely aperture and roughness. Joint aperture, in tum, i::; very sensitive to stress changes. Special attention must therefore be paid to the joints in hydromechanical analyses. In this report are presented some studies that were carried out for the hydromechanical characterization of joints of the Alto Lindoso rock mass and numerical simulations of the hydromechanical behaviour of two selected sections of the high pressure circuit.