Publicações

A monumental tetrastyle canopy (four columns topped by a hollow cap overlaying a statue), built in1948 at the centre of Kathmandu, Nepal, has suffered full collapse during the April 25, 2015 Mw7.8earthquake. Two video camera recordings let us recover the most important movements of thestructure. At a distance of 2.9 km from the monument, an accelerometric station (KATNP) recordedthe motion which we used as input of a model structure made with DEM. Geometry and dimensionsof main elements were mostly obtained from satellite images. Concrete and steel in columns wereconsidered as the common practice at that time. We performed some sensitivity analyses varyingthe mechanical properties due to the possibility of aging alterations in concrete and steel and toincorporate uncertainties on the geometric characteristics. Albeit the response has a significantvariability, results show that it is possible to reproduce well the video images, attesting theimportance of video cameras to capture the dynamic performance of structures, providing insightinto their behaviour and data to support numerical investigations.

In this study, the in-plane structural behavior, capacity, and performance of dry-joint stone masonry walls (DJSMWs)and the effects of the vertical stress level on these factors are investigated via a stochastic discontinuumanalysis that considers the material uncertainty. A discontinuum type of analysis is performed based on thediscrete element method (DEM), where each stone masonry unit is explicitly represented in the computationalmodel. To better simulate the cracking and shear failure modes within the stone units, a coupled fracture energybasedcontact constitutive model is implemented into a commercial discrete element code, 3DEC. First, theproposed modeling approach is validated by comparing to experimental findings in literature. Then, theapproach is used to explore the failure mechanism and the force

The installation of vibration-based structural health-monitoring systems relying in the study of natural frequencies to assess the condition of civil engineering structures is becoming more and more common. The extraction of these monitoring features can be achieved through automated operational modal analysis, combining output-only identification methods with cluster analyses, and comparing the identified modal properties with references, in a process known as modal tracking. However, changing environmental and operational conditions affect the dynamic behaviour of structures, disturbing the process of modal tracking, which may lead to the loss of important information and to misidentifications. In this context, this paperproposes a new methodology for modal tracking within the scope of automated operational modal analysis, especially prepared for scenarios with strong external influence on modal properties. A concrete arch dam with large variations of some natural frequencies is used as case study, and the proposed methodology is compared to a standard procedure using a quite unique monitoring data set continuously collected for 3 years.

Neste artigo apresenta-se a formulação e resultados da aplicação de dois modelos descontínuos tridimensionais que simulam a interação hidromecânica. Nestes modelos o comportamento mecânico é simulado de forma idêntica mas o comportamento hidráulico é simulado com duas abordagens diferentes. O primeiro modelo baseia-se numa formulação que admite o escoamento através de elementos planos de interface. O segundo modelo, que se propõe neste artigo, baseia-se numa discretização unidimensional, ocorrendo o escoamento através de elementos de canais. Os modelos hidromecânicos implementados no módulo computacional Parmac3D Fflow são verificados e validados através de exemplos simples, e o modelo proposto é calibrado de modo a serem obtidos, com os dois modelos, os mesmos valores de pressão e de caudal. Foi desenvolvido um modelo hidromecânico de um conjunto barragem/fundação, tendo em consideração a existência de cortina de impermeabilização e de sistema de drenagem na fundação. Salientam-se as vantagens do modelo proposto no estudo do comportamento hidromecânico de fundações de barragens.

Earthquake damage in historic masonry buildings is generally caused by the collapse of individual portions thatbecome detached form the structure and fail by overturning. These mechanisms are mainly governed by thediscrete nature and geometry of the block units. Analyses based on explicit micro-modelling in which each blockis considered separately are therefore of increasing importance. This paper offers a robust tool for the seismicassessment of masonry structures under either, quasi-static or dynamic loading. Algorithms for performing dynamicpulses and pushover analyses through the Discrete Element Method are developed and described, takinginto account the actual discrete nature and geometry of masonry. A numerical procedure is proposed thatautomatically detects the collapse mode and follows the evolution of the analysis until collapse. The implementedmethod is able to give a reliable estimate of the expected failure mechanism, providing the seismicacceleration required to trigger the motion and the ultimate displacement beyond which the collapse occurs.Finally, the implemented algorithms are applied to two case studies and the results are compared with thetraditional analysis based on rigid-block kinematics to outline the features and potentialities of the proposedapproach.

Conservation of the European-built heritage is nowadays closely related to interventions in masonry construction. Since a significant part of these structures are located in earthquake prone zones, designing protective measures that ensure their preservation requires the assessment of the associated seismic vulnerability and the understanding of their degradation mechanisms. However, due to the presence of discontinuities between its constituent elements, the numerical simulation of the non-linear response of masonry structures subjected to strong earthquakes is a cumbersome task, especially when performed using the traditional finite element method. As an alternative, the discrete element method is particularly suitable for the numerical analysis of such structures under large, damaging loads. By allowing discrete displacements/rotations of individual bodies, and by automatically recognising new contacts between bodies, while eliminating obsolete ones, this numerical approach can simulate the complete detachment of discrete bodies initially in contact.The present paper illustrates the use of the discrete element method to assess the seismic vulnerability of stone arches. A probabilistic approach allows to consider the variability of theseismic action and the uncertainties in the definition of the material properties. First, an unreinforced masonry arch is considered. Based on non-linear multi-directional incremental dynamic analyses, five damage states are proposed and the respective fragility curves are elaborated. Toimprove the arch

A seismic assessment study of two historical masonry arch bridges, with different geometries and spans, ispresented. The seismicity of the two locations was analyzed in order to define the seismic action to be applied.Artificial ground motion records were generated accordingly, and real ground motions were also used. The twonumerical models were created with a 3D discrete element code. The accuracy of the deformability of the blockmodels was verified by comparison with a finite element model. In situ measurements of the natural frequencieswere available for one of the bridges, providing further means for model calibration. Time domain dynamicanalyses were performed with each set of ground motions, allowing an evaluation of damage and failure modesunder seismic action. The shorter span bridge was found to withstand the regulatory records with minimumdamage. In contrast, the longer span bridge displayed a significant vulnerability to earthquake action. The studyshows that rigid block models have the ability to represent effectively the dynamic elastic response of the bridgesand can be calibrated by ambient vibration measurements. Furthermore, the discrete element models provide apowerful tool to investigate the nonlinear dynamic response and failure of these structures, which has to be basedon a comprehensive set of dynamic records.

Stability analyses of geotechnical structures in rock are traditionally performed using deterministic methods. In Europe, Eurocode7, introduced in the beginning of the 21st century, adopts limit state design and semi-probabilistic methods, using partial factors for the design of geotechnical structures. Meanwhile, reliability-based design, using probabilistic methods, is becoming more common in practical cases. The paper considers an intentionally simple case study?the analysis of a slope in a rock mass with one discontinuity, considered in a discrete way, forming a rock block to be stabilised by anchors?to compare the results obtained with the different methods. The objective is to calculate the force applied by the anchors so that the ultimate limit states of sliding of the rock block is verified. Deterministic-based design optimization considering both the traditional global safety factor approach and the partial factor approach following the Eurocode 7 are first applied. A reliability-based design optimization procedure?which takes geometrical and mechanical properties of the discontinuities as random variables?is then used, and the results are compared to the former ones. A discussion is presented concerning the consistency of the obtained results.

Civil engineering structures are generally supposed to have long operation life spans during which they aresubmitted to many factors, both environmentally and human-induced, that degrade their condition and performance,gradually leading to the occurrence of damages and malfunctions. Therefore, systems capable ofmonitoring and assessing structural performance automatically are highly desirable.In this context, this paper describes the vibration-based structural health monitoring of Baixo Sabor arch dam,in Portugal, detailing results from the several processing stages needed to achieve the ability to detect damage.Automated operational modal analysis is applied to the data obtained during the first three years of monitoring,after which environmental and operational conditions affecting modal properties are studied and their effectsminimised through the combined application of weighted regression models and principal components analysis.Finally, damages are simulated in a numerical model of the dam, and the results are used to test the ability ofdamage detection tools to find these anomalies.The present paper uses a quite unique set of experimental data to test for the first time the ability of avibration-based SHM system to identify realistic damages in an arch dam.

The paper investigates the effectiveness of two-dimensional Discrete Element Method as a tool forstructural analysis of arches provided with buttresses and backfill and strengthened with externallybonded reinforcement. Masonry vault and buttresses are modelled as an assembly of 2Drigid blocks interacting through non-linear contact joints, the backfill is discretized into deformableelastic-plastic triangular elements, while the reinforcement is modelled by means of trusselements bonded to the substrate through non-linear springs. A parametric analysis on theinfluence of material parameters and the effect of the discretization of the backfill is carriedout, and the outcome of different reinforcement systems, consisting of Steel Reinforced Groutapplied either at the intrados or at the extrados, are analysed. The comparison with experimentalfull-scale tests proved the ability of the numerical approach to capture hinges position, loadbearing capability, as well as the increase in deflection and load capacity provided by thereinforcement.

Use of SSHM data for dynamic behaviour analysis and damage detection on large dams. The cases of Cabril dam and Cahora Bassa dam

Nesta comunicação é apresentado um modelo de partículas 3D (MP), baseado nométodo dos elementos discretos, que inclui de forma aproximada a deformabilidade dapartícula e a geometria poliédrica. Neste modelo MP, o interior de cada partícula édiscretizado com uma malha de elementos finitos do tipo tetraédrico. Por razõescomputacionais procurou-se manter o modelo de contacto o mais simples possível,deste modo as partículas poliédricas são aproximadas por partículas esféricas, queinteragem entre si com base num modelo de contacto múltiplo em que a superfície decontacto é definida com base na faceta comum aos diagramas de Laguerre-Voronoique representam as partículas em contacto. Apresentam-se os resultados numéricosobtidos em ensaios triaxiais em rocha com o modelo de partículas flexivel (VGM3D-F)e comparam-se com os obtidos com um modelo de partículas rígidos. O estudoapresentado permite concluir que a inclusão da deformabilidade da partícula aumentao desempenho dos modelos do tipo MP.

As barragens de Ferradosa e Olgas, localizadas no Alto Douro, nos concelhos de Freixo de Espada à Cinta e Moncorvo, respetivamente, foram construídas entre 2007 e 2009. São estruturas gravidade de betão com cerca de 30 m de altura. A água das respetivas albufeiras destina-se ao abastecimento público, sendo exploradas pela empresa Águas do Norte, do grupo Águas de Portugal, com o apoio do LNEC nos aspetos relacionados com a segurança estrutural.Na comunicação apresentam-se os aspetos relevantes da análise e interpretação do comportamento observado das barragens durante o primeiro enchimento da albufeira e os primeiros 10 anos de exploração.Na análise estrutural consideraram-se modelos planos de elementos finitos das barragens e respetivas fundações, o comportamento viscoelástico dos materiais, a variação das ações da água e as variações térmicas no betão das obras.Os resultados numéricos são comparados com os resultados da observação contínua das obras, apresentando uma boa concordância.

Concrete gravity dams are mass concrete structures which resist to external loads mainly by their dead weight. The geometrical solution currently considered, which evolved from the reasoned application of mathematical theory to structural engineering, are characterized by right-angled triangular profiles with downstream face slopes of 0.7 to 0.8. In medium to high seismic intensity zones, such as Portugal, other constructive dispositions may be necessary. Under seismic loadings, it is generally accepted that the gravity profile keyed into the foundation at a depth corresponding to 10% of the dam height is a crucial contribution to ensure structural stability conditions. However, this detail is often not considered in stability analyses, which is generally understood as a conservative strategy. In this work, the benefits from considering the keyed depth in stability analyses are evaluated. For that, 100-meter-high hypothetical gravity profiles, keyed at a depth of 10 meters, are considered. To allow the development of rigid-body failure mechanisms, a downstream rock wedge, inclined at a critical angle, is assumed. At first, the analytical expressions that describe the failure mechanisms identified, considering the dam-foundation interface as a dominant failure surface, are deduced and validated through numerical modelling. Afterwards, the frictional properties of the interface, for several loading conditions which result in different total net forces and the corresponding application points, are computed. Lastly, the stability benefit is evaluated by comparing the safety factor obtained with the correspondent of an unkeyed profile. When explicitly considering the keyed depth in stability analyses, higher safety levels are obtained which can be crucial to ensure stability conditions. It was proved that, under the same load conditions, the consideration of unkeyed profiles would demand higher values of the friction angle, up to 12º more than considering the correspondent keyed profile. Moreover, this also ensures stability conditions for more inclined resultant net forces.

The Foz Tua hydroelectric development is located in the north of Portugal at the mouth of the Tua river, a tributary of the Douro river, and is equipped with 270 MW of power capacity, making it a very important asset in the country

The continuous displacement monitoring is essential for the safety control of large dams. It shouldbe based on the comparison between numerical model results and monitoring data, e.g. observeddisplacements using plumb lines, geodetic methods or, more recently, with GNSS (GlobalNavigation Satellite System). For Cabril dam, the case study presented in this paper, no plumblines were installed in the central section. Thus, the displacement monitoring in this section iscarried out by classical geodetic methods that do not allow continuous monitoring (only twoobservation campaigns per year). So, in this case, the use of GNSS was considered particularlyuseful, as it allows continuous monitoring of displacements at the top of the central section. AsCabril dam presents cracking problems since the first filling, it is important to continuously monitorseveral notable points, which includes the point at the top of the central section. The present workfocuses on the validation of the displacements obtained by GNSS, at Cabril dam, using a 3D finiteelement model, developed in MATLAB, in which the horizontal cracking at the upper zone issimulated through joint elements. The 3DFE model was calibrated based on the displacementsobserved by plumb lines (in two non-central sections) and by classical geodetic methods,considering variations in hydrostatic pressure and annual temperature variations. Thedisplacement evolution observed by plumb lines and geodetic methods were analyzed usingHSCT (Hydrostatic, Seasonal, Creep and other Time effects) separation of effects models, tofacilitate the comparison process between the observed displacements and the numerical results.In this way, the 3DFE model was firstly calibrated using plumb lines results and then it was usedto validate GNSS measurements.

Dam Safety Control has been at the front line of technology adoption in what concerns dataacquisition. However, it does not take full advantage of the latest advancements when it comes toin-situ, real-time, information visualization. This work explores the application of Augmented Realityto the inspection and monitoring of large Civil Engineering structures, namely concrete dams. Theproposed approach focuses on offering new visualization possibilities, that are not accessiblethrough traditional means, to Dam Safety Control. In that scope, it depicts the specification anddevelopment of a proof-of-concept prototype that allows the monitoring of relevant structural-relatedinformation in an Augmented Reality environment. In particular, it offers an easy and straightforwardway for Civil Engineers and Observation Technicians a mean to access data from the network ofsensors situated in the downstream face and the interior of the structure. Besides providinginsightful information on the current status, it allows exploring the evolution in time of valuesregistered in each sensor. A preliminary study aimed at validating the proposed approach showsthat Augmented Reality technologies can be used efficiently in Dam Safety Control.

A barragem da Bemposta, no trecho internacional do rio Douro, foi construída entre 1960 e 1964. Destina?se à produção de energia, permitindo ainda alguma regularização de caudais. Trata?se de uma barragem em arco?gravidade de betão, aligeirada com um grande vazamento junto à fundação. É definida em planta por arcos circulares e tem cerca de 87 m de altura máxima acima da fundação. O betão da barragem está afetado por reações expansivas, do tipo álcalis?sílica, de moderada magnitude, pelo que os seus efeitos estruturais aparentes são pouco significativos. Para interpretação do comportamento observado da barragem e dos efeitos das reações expansivas, foi elaborado um modelo estrutural que considerou a evolução no tempo das principais ações (pressão hidrostática, variações de temperatura e expansões) e das propriedades do betão. As variações de temperatura no corpo da barragem foram calculadas com um modelo térmico que teve em consideração as temperaturas do ar e da água nas superfícies exteriores da barragem e os efeitos da radiação solar. O modelo estrutural foi analisado em regime viscoelástico, para ter em consideração a fluência e a relaxação do betão. Foi obtido um ajuste notável entre os resultados da observação e das modelações térmica e estrutural. Os resultados evidenciam que os efeitos das expansões são já dominantes no comportamento da obra, em termos de deslocamentos horizontais e verticais e de tensões.

According to the general guidelines of the International Commission on Large Dams (ICOLD) regarding structural safety and health monitoring, the performance of dams under operational/ambient vibrations and during seismic events must be evaluated. This is particularly important considering that dams are civil engineering structures of great relevance for populations which entail a high potential risk1. Therefore, Seismic and Structural Health Monitoring (SSHM) is a topic that has gained importance and thus the installation of monitoring systems for continuously measuring vibrations has been proposed for most of the new large dams, to evaluate their behaviour since the early stages of their service life, and for some of the older dams, built several decades ago, in which deterioration problems (e.g. swelling reactions) may have evolved over the years.In this scope, the present paper focuses on studying the dynamic behaviour of large dams over time, including identification of modal parameters (natural frequencies, modal damping ratios and mode shapes) and seismic response analysis, based on measured accelerations time histories. A comparison between experimental results obtained from continuous vibrations monitoring data and numerical modelling results from 3DFE models is presented. The goal is to emphasize the interest of the combined use of recorded data from continuous dynamic monitoring systems and of numerical modelling software for SSHM of dams.The case studies are two large arch dams that have been under continuous dynamic monitoring over the last ten years: Cabril dam (132 m high), the highest Portuguese dam, and Cahora Bassa dam (170 m high), located in Mozambique, one of the highest dams in Africa. The monitoring systems installed in both dams have similar schemes and were designed to continuously record acceleration time series in several points located in the dam body (upper part) and near the dam-foundation interface, using uniaxial and triaxial accelerometers. Specific software was developed for analysing monitoring data, including automatic modal identification and automatic detection of seismic events. The main experimental outputs are presented for Cabril dam and Cahora Bassa dam, with emphasis on the evolution of natural frequencies over time, on vibration mode shapes for various water levels, and, finally, on the measured response in accelerations during seismic events. The numerical results are computed using a 3DFEM program, based on a solid-fluid coupled formulation to simulate the dam-reservoir-foundation system, considering the dam-water dynamic interaction and the propagation of pressure waves throughout the reservoir.

This paper presents a study on the non-linear seismic response of Cabril arch dam (Portugal), for a load combination including the dam

Masonry is a combination of units such as stones, bricks or blocks usually laid in a cementitious or limemortar. It is probably the oldest material used in construction and has proven to be both simple to buildand durable. Over the years, existing masonry constructions have inevitably suffered damage with time.Earthquakes, soil settlements, material degradation and lack of maintenance are the main reasons forthat. Careful and periodic assessment of such structures is necessary in order to evaluate their structuralcapacity and safety levels. However, performing the structural analysis of masonry construction is notan easy task. A review is presented of the main models based on the discrete element method and the available related numerical techniques that have been proposed for the analysis of masonry. The essential assumptions adopted by these models and numerical implementation issues are discussed. Differences between available models are illustrated by applications to various masonry problems including static and dynamic analysis of masonry arch bridges, walls, vaults, domes and ancient colonnades.This book is composed of 17 chapters authored/co-authored by 25 outstanding researchers from 11countries (Canada, France, Greece, Hungary, Iran,Italy, Mexico, Norway, Portugal, UK, USA), whichwere reviewed by 60 referees.

N/A

This chapter consists of two parts. First a general overview is given: the exact definition of the Discrete Element Method is provided, and the main types of existing models are introduced; then the theoretical fundaments of the most important approaches available today for masonry analysis are given. The second part of the chapter focuses on 3DEC, the most widespread commercial DEM code for masonry analysis. This second part begins with a theoretical overview. Application issues for masonry structures are then considered (block material behaviour, contact representation, structural elements like cables or bars etc.). Among the practical examples arches, barrel vaults, walls, coloumns and complete structures (like houses) are presented, including the issues of quasi-static versus dynamic analysis and of block fracture as well. The readers can find helpful advice on how to simulate their own problems most effectively.

N/A

Discrete element models have become a major tool for masonry analysis, allowing a suitable representation of its discontinuous nature and marked nonlinear behaviour. The chapter reviews the fundamental assumptions of the main DEM formulations available. It focuses more specifically on the widely used UDEC and 3DEC codes, explaining their relation with the other approaches, and the most relevant issues arising in their application to masonry. Applications to the main types of structures are reviewed, considering both static and dynamic analyses. Recent research providing comparisons of the numerical models with experimental and field data is particularly covered. The discussion of the different examples is aimed at clarifying the key capabilities of DEM and demonstrating the most effective ways of using it in a variety of masonry analysis situations.

This chapter is focused on the Portuguese experience on the developmentand exploration of systems for continuously monitoring dam vibrations, usingaccelerometers. The pioneer system for seismic and structural health monitoring(SSHM) installed in Cabril dam (the highest Portuguese arch dam: 132 m high) isdescribed in detail. The design of this system was the result of a long-term LNECresearch program, still ongoing. These monitoring systems should include softwaredeveloped to automatically perform the analysis of collected data, including theautomatic comparison with numerical results from 3DFE models. In view of thegood results obtained with the system in operation in Cabril dam since 2008, similarsystems have been installed in other large dams in Portugal, particularly in recentlybuilt dams. Finally, Baixo Sabor dam is presented as an example of a new Portuguesedam with a complete SSHM system, in operation since 2015. Themain experimentalresults obtained for both dams are shown, namely the evolution of natural frequenciesover time, mode shapes and the measured seismic response to earthquake events.

Para verificação do cumprimento das exigências de segurança das barragens,tanto relativamente à funcionalidade (cenários correntes), como em relação àsegurança ao colapso (cenários de rotura), é essencial utilizar modelos de simulação oude interpretação (no caso de obras existentes) do seu comportamento. Estes modelossão idealizações (simplificações) da realidade, tanto no que diz respeito às acções(modelos das acções), como no que respeita à componente estrutural (modelos estruturais).A solução destes modelos, através de adequados métodos de análise, quantificaparâmetros da resposta das estruturas que permitem avaliar a sua segurança, utilizandocritérios de segurança previamente definidos.A validação destes modelos pode ser feita, no caso de cenários correntes,através da sua comparação com os resultados da observação do comportamento debarragens. No caso de cenários de rotura, não existe muita experiência de comparaçãodestes resultados com situações reais: é pequeno o número de acidentes ocorrido e,mesmo nestes, o volume de informação é reduzido. Desta forma, o recurso a métodosexperimentais, para o estudo de cenários de rotura, tem uma importância acrescida.Assim o principal objectivo deste trabalho é contribuir para melhorar a capacidade deavaliação da segurança de barragens de betão envolvendo cenários de rotura pela fundação.Neste trabalho desenvolveram-se dois ensaios experimentais em modelosfísicos: um primeiro envolvendo uma barragem abóbada, para o estudo de cenários derotura da fundação para acções estáticas; e um segundo de uma barragem gravidadeensaiado em mesa sísmica, com vista a estudar a rotura pela fundação para acçõesdinâmicas.A previsão e interpretação dos ensaios foram efectuadas com modelosmatemáticos adequados, que permitiram a sua validação e posterior utilização no estudode outros cenários.

A brief description of the phenomena and problems associated with underground structures in hydraulic projects is presented, namely in what concerns the powerhouses, surge chambers and pressure tunnels and shafts. An analysis of the calculation methodologies followed in the structural design of this works is presented, as well as of the numerical models usually adopted, namely finite and boundary element models. Finally, some applications of computational mechanics are presented. First, a parameter study for underground powerhouses, with special emphasis in the definition of shapes, existence of several caverns,and in the tridimensional equilibria is described. Afterwards, examples of application to some hydraulic projects are illustrated: a large underground powerhouse in Mozambique, the Alto Lindoso hydroelectric power scheme in construction in the north of Portugal, and the Castelo do Bode tunnel, in operation, integrated in the water supply system to Lisbon.

O presente trabalho aborda a origem do estado de tensão interna dos maciços rochosos e apresenta os factores que o influenciam. Apresentam-se as técnicas e a aparelhagem correntemente utiiizada na determinação do estado de tensão, bem como a interpretação dos ensaios mais comuns, dando-se maior relevo aos ensaios com macacos planos pequenos (S F J) e com o extensómetro tridimensional (S T T),efectuados correntemente pelo LNEC.

Descreve-se sucintamente uma técnica para amostragem linear de descontinuidades em faces expostas de maciços rochosos e referem-se métodos para tratamento dos dados de campo com vista à definição defamílias de descontinuidades e caracterização de uma forma estatística da sua orientação, espaçamento e extensão. Apresentam-se os resultados obtidos para o caso de uma galeria subterrânea no aproveitamentohidroeléctrico do Alto Lindoso. Para as famílias de descontinuidade identificadas apresenta-se um estudo dos blocos tetraédricos que se poderão formar nas diferentes faces de rocha e analisam-se as suas condições de estabilidade.

N/A

Apresentam-se, neste relatório, modelos numéricos baseados no método dos elementos da fronteira, desenvolvidos no LNEC para análise de estruturas subterrâneas. Tecem-se algumas considerações sobre o método dos elementos de fronteira, descrevem-se os modelos desenvolvidos para equilíbrios planos e tridimensionais e apresentam-se alguns exemplos de aplicação.

N/A

N/A

N/A

This document presents a back analysis procedure for identification of the elastic parameters of transversely isotropic rock cores, containing an overcoring triaxial strain probe, from the strains measured during a biaxial test. A three-dimensional finite element model was developed to simulate the biaxial test on the overcored rock specimen and to compute the strains at the location of the strain gauges. Different optimisation algorithms were tested and the most suitable one was selected. The back analysis procedure was tested for identification of the five elastic parameters and the two orientation angles that characterise a transversely isotropic rock core. In spite that, with the developed methodology, convergence was reached and all those parameters could be identified, sensitivity analyses demonstrated that the results obtained were not stable and therefore they were not reliable. By introducing constrains based on common practice and previous experience, a stable and robust methodology was achieved: the three elastic parameters, E1, E2 and ?2, are reliably identified using the value of G2 calculated with Saint-Venant’s expression and a fixed value of ?1, while the orientation parameters are obtained from observation of overcored rock. Analysis of the results shows that application of this methodology represents an enormous step forward when compared with the traditional use of isotropy. Besides, the methodology is general and can also be used with other types of overcoring equipment. The five elastic parameters and the two orientation angles obtained can then be used, together with the overcoring strains, to compute the complete in situ state of stress.

This document presents the work developed by the PhD student Margarida Espada in the scope of the course unit Risk Analysis in Geotechnical Works of the Doctoral Program in Civil Engineering of the Faculty of Engineering of the University of Porto (FEUP). This work presents a reliability analysis, using the response surface method (RSM), for the case study of the left bank excavation slopes of the Baihetan arch dam foundation, which is one of the case studies of Margarida Espada's PhD thesis. The aim was to approximate an implicit limit state function by computing safety factors, using a discrete element model of the Baihetan left bank developed in 3DEC software, where the shear strength parameters of two important rock discontinuities were considered as random variables. The probability of failure was then obtained through an iterative process, using approximation methods. This work presents the 3DEC model developed to analyse the stability conditions in the Baihetan left bank and the results of the reliability analysis.

O problema da solução das equações de Navier Stokes é abordado neste trabalhopropondo-se uma técnica de representação das incógnitas deslocamentos e pressõesvariáveis no espaço e no tempo em série de Delta de Dirac e suas derivadas no tempocujos coeficientes se determinam com base na solução de sistemas de equaçõesdiferenciais definidos no espaço (problema com três variáveis espaciais independentesque pode ser estudado pelo método de Monge).

Neste relatório apresentam-se as equações básicas da elastodinâmica linear, as soluçõesfundamentais e o teorema da representação no domínio de tempo e de frequência.Para movimentos finitos de casca formula-se o teorema dos trabalhos virtuais e a suaimplementação pelo método dos elementos finitos.

Neste relatório apresentam-se os principais aspectos da modelação sísmica de barragensabóbada. Assim propõe-se: modelos numéricos de geração de sismos por uma falha; aforma como o sismo actua na barragem; modelos para estudar a influência da albufeirana vibração do conjunto; métodos para solução das equações do movimento; e novasformulações de elementos finitos para o problema estrutural.

In pressure tunnels and shafts, in addition to the mechanical effect that excavation has on the rock mass and the disturbance that it introduces in the water flow, also the contained water can interact from the mechanical and hydraulic points of view with the rock mass. Seepage in fractured rock masses is dominated by the flow that takes place through the joints, and this is highly d(;pendent on their properties, namely aperture and roughness. Joint aperture, in tum, i::; very sensitive to stress changes. Special attention must therefore be paid to the joints in hydromechanical analyses. In this report are presented some studies that were carried out for the hydromechanical characterization of joints of the Alto Lindoso rock mass and numerical simulations of the hydromechanical behaviour of two selected sections of the high pressure circuit.