Publicações

A monumental tetrastyle canopy (four columns topped by a hollow cap overlaying a statue), built in1948 at the centre of Kathmandu, Nepal, has suffered full collapse during the April 25, 2015 Mw7.8earthquake. Two video camera recordings let us recover the most important movements of thestructure. At a distance of 2.9 km from the monument, an accelerometric station (KATNP) recordedthe motion which we used as input of a model structure made with DEM. Geometry and dimensionsof main elements were mostly obtained from satellite images. Concrete and steel in columns wereconsidered as the common practice at that time. We performed some sensitivity analyses varyingthe mechanical properties due to the possibility of aging alterations in concrete and steel and toincorporate uncertainties on the geometric characteristics. Albeit the response has a significantvariability, results show that it is possible to reproduce well the video images, attesting theimportance of video cameras to capture the dynamic performance of structures, providing insightinto their behaviour and data to support numerical investigations.

In this study, the in-plane structural behavior, capacity, and performance of dry-joint stone masonry walls (DJSMWs)and the effects of the vertical stress level on these factors are investigated via a stochastic discontinuumanalysis that considers the material uncertainty. A discontinuum type of analysis is performed based on thediscrete element method (DEM), where each stone masonry unit is explicitly represented in the computationalmodel. To better simulate the cracking and shear failure modes within the stone units, a coupled fracture energybasedcontact constitutive model is implemented into a commercial discrete element code, 3DEC. First, theproposed modeling approach is validated by comparing to experimental findings in literature. Then, theapproach is used to explore the failure mechanism and the force

The installation of vibration-based structural health-monitoring systems relying in the study of natural frequencies to assess the condition of civil engineering structures is becoming more and more common. The extraction of these monitoring features can be achieved through automated operational modal analysis, combining output-only identification methods with cluster analyses, and comparing the identified modal properties with references, in a process known as modal tracking. However, changing environmental and operational conditions affect the dynamic behaviour of structures, disturbing the process of modal tracking, which may lead to the loss of important information and to misidentifications. In this context, this paperproposes a new methodology for modal tracking within the scope of automated operational modal analysis, especially prepared for scenarios with strong external influence on modal properties. A concrete arch dam with large variations of some natural frequencies is used as case study, and the proposed methodology is compared to a standard procedure using a quite unique monitoring data set continuously collected for 3 years.

Neste artigo apresenta-se a formulação e resultados da aplicação de dois modelos descontínuos tridimensionais que simulam a interação hidromecânica. Nestes modelos o comportamento mecânico é simulado de forma idêntica mas o comportamento hidráulico é simulado com duas abordagens diferentes. O primeiro modelo baseia-se numa formulação que admite o escoamento através de elementos planos de interface. O segundo modelo, que se propõe neste artigo, baseia-se numa discretização unidimensional, ocorrendo o escoamento através de elementos de canais. Os modelos hidromecânicos implementados no módulo computacional Parmac3D Fflow são verificados e validados através de exemplos simples, e o modelo proposto é calibrado de modo a serem obtidos, com os dois modelos, os mesmos valores de pressão e de caudal. Foi desenvolvido um modelo hidromecânico de um conjunto barragem/fundação, tendo em consideração a existência de cortina de impermeabilização e de sistema de drenagem na fundação. Salientam-se as vantagens do modelo proposto no estudo do comportamento hidromecânico de fundações de barragens.

Earthquake damage in historic masonry buildings is generally caused by the collapse of individual portions thatbecome detached form the structure and fail by overturning. These mechanisms are mainly governed by thediscrete nature and geometry of the block units. Analyses based on explicit micro-modelling in which each blockis considered separately are therefore of increasing importance. This paper offers a robust tool for the seismicassessment of masonry structures under either, quasi-static or dynamic loading. Algorithms for performing dynamicpulses and pushover analyses through the Discrete Element Method are developed and described, takinginto account the actual discrete nature and geometry of masonry. A numerical procedure is proposed thatautomatically detects the collapse mode and follows the evolution of the analysis until collapse. The implementedmethod is able to give a reliable estimate of the expected failure mechanism, providing the seismicacceleration required to trigger the motion and the ultimate displacement beyond which the collapse occurs.Finally, the implemented algorithms are applied to two case studies and the results are compared with thetraditional analysis based on rigid-block kinematics to outline the features and potentialities of the proposedapproach.

Conservation of the European-built heritage is nowadays closely related to interventions in masonry construction. Since a significant part of these structures are located in earthquake prone zones, designing protective measures that ensure their preservation requires the assessment of the associated seismic vulnerability and the understanding of their degradation mechanisms. However, due to the presence of discontinuities between its constituent elements, the numerical simulation of the non-linear response of masonry structures subjected to strong earthquakes is a cumbersome task, especially when performed using the traditional finite element method. As an alternative, the discrete element method is particularly suitable for the numerical analysis of such structures under large, damaging loads. By allowing discrete displacements/rotations of individual bodies, and by automatically recognising new contacts between bodies, while eliminating obsolete ones, this numerical approach can simulate the complete detachment of discrete bodies initially in contact.The present paper illustrates the use of the discrete element method to assess the seismic vulnerability of stone arches. A probabilistic approach allows to consider the variability of theseismic action and the uncertainties in the definition of the material properties. First, an unreinforced masonry arch is considered. Based on non-linear multi-directional incremental dynamic analyses, five damage states are proposed and the respective fragility curves are elaborated. Toimprove the arch

A seismic assessment study of two historical masonry arch bridges, with different geometries and spans, ispresented. The seismicity of the two locations was analyzed in order to define the seismic action to be applied.Artificial ground motion records were generated accordingly, and real ground motions were also used. The twonumerical models were created with a 3D discrete element code. The accuracy of the deformability of the blockmodels was verified by comparison with a finite element model. In situ measurements of the natural frequencieswere available for one of the bridges, providing further means for model calibration. Time domain dynamicanalyses were performed with each set of ground motions, allowing an evaluation of damage and failure modesunder seismic action. The shorter span bridge was found to withstand the regulatory records with minimumdamage. In contrast, the longer span bridge displayed a significant vulnerability to earthquake action. The studyshows that rigid block models have the ability to represent effectively the dynamic elastic response of the bridgesand can be calibrated by ambient vibration measurements. Furthermore, the discrete element models provide apowerful tool to investigate the nonlinear dynamic response and failure of these structures, which has to be basedon a comprehensive set of dynamic records.

Stability analyses of geotechnical structures in rock are traditionally performed using deterministic methods. In Europe, Eurocode7, introduced in the beginning of the 21st century, adopts limit state design and semi-probabilistic methods, using partial factors for the design of geotechnical structures. Meanwhile, reliability-based design, using probabilistic methods, is becoming more common in practical cases. The paper considers an intentionally simple case study?the analysis of a slope in a rock mass with one discontinuity, considered in a discrete way, forming a rock block to be stabilised by anchors?to compare the results obtained with the different methods. The objective is to calculate the force applied by the anchors so that the ultimate limit states of sliding of the rock block is verified. Deterministic-based design optimization considering both the traditional global safety factor approach and the partial factor approach following the Eurocode 7 are first applied. A reliability-based design optimization procedure?which takes geometrical and mechanical properties of the discontinuities as random variables?is then used, and the results are compared to the former ones. A discussion is presented concerning the consistency of the obtained results.

Civil engineering structures are generally supposed to have long operation life spans during which they aresubmitted to many factors, both environmentally and human-induced, that degrade their condition and performance,gradually leading to the occurrence of damages and malfunctions. Therefore, systems capable ofmonitoring and assessing structural performance automatically are highly desirable.In this context, this paper describes the vibration-based structural health monitoring of Baixo Sabor arch dam,in Portugal, detailing results from the several processing stages needed to achieve the ability to detect damage.Automated operational modal analysis is applied to the data obtained during the first three years of monitoring,after which environmental and operational conditions affecting modal properties are studied and their effectsminimised through the combined application of weighted regression models and principal components analysis.Finally, damages are simulated in a numerical model of the dam, and the results are used to test the ability ofdamage detection tools to find these anomalies.The present paper uses a quite unique set of experimental data to test for the first time the ability of avibration-based SHM system to identify realistic damages in an arch dam.

The paper investigates the effectiveness of two-dimensional Discrete Element Method as a tool forstructural analysis of arches provided with buttresses and backfill and strengthened with externallybonded reinforcement. Masonry vault and buttresses are modelled as an assembly of 2Drigid blocks interacting through non-linear contact joints, the backfill is discretized into deformableelastic-plastic triangular elements, while the reinforcement is modelled by means of trusselements bonded to the substrate through non-linear springs. A parametric analysis on theinfluence of material parameters and the effect of the discretization of the backfill is carriedout, and the outcome of different reinforcement systems, consisting of Steel Reinforced Groutapplied either at the intrados or at the extrados, are analysed. The comparison with experimentalfull-scale tests proved the ability of the numerical approach to capture hinges position, loadbearing capability, as well as the increase in deflection and load capacity provided by thereinforcement.

During the last decade, many vibration-based structural health monitoring systems have been successfully implemented in different structures such as bridges, towers, stadia roofs and wind turbines, with the aim of studying the structures dynamics and its evolution over time and even-tually detect the occurrence of novel structural behaviour that may indicate the presence of damage.Such vibration-based monitoring systems generally rely on the identification of modal proper-ties, which are then used as monitoring features. Therefore, from operational modal analysis to the tracking of the said features, many processing steps occur that depend on the accuracy of the identified modal properties in order to produce good results. Thus, the calculation of the uncertainties associated with the identified modal properties may act as an important tool in this process.In this context, data obtained from the continuous dynamic monitoring of a concrete arch dam has been used to test the effect of taking the uncertainties of identified modal properties into consideration when performing operational modal analysis and modal tracking.

A barragem de Pretarouca, no rio Balsemão (serra de Montemuro, concelho de Lamego), tem 29,70 m de altura e 305 m de desenvolvimento. A albufeira tem 3,2 hm3, destinando-se a água a abastecimento público. A obra, construída entre 2007 e 2009, é explorada pela empresa Águas do Norte, do grupo Águas de Portugal, com o apoio do LNEC nos aspetos relacionados com a segurança estrutural.Na comunicação apresentam-se os aspetos relevantes da análise e interpretação do comportamento observado da barragem durante o primeiro enchimento da albufeira, ocorrido em 2009, e o período de exploração subsequente. Na análise estrutural considerou-se um modelo plano do conjunto barragem-fundação, o comportamento viscoelástico dos materiais, a variação das ações da água e as variações térmicas que ocorreram no betão da obra.Os resultados numéricos são comparados com os resultados da observação contínua da obra, apresentando uma boa concordância.

This paper presents the relevant monitoring data and the main results of the analysis and interpretation of the structural behaviour of Bouçoais-Sonim dam, a medium-size gravity concrete dam of 42.5 m high, during the first filling of the reservoir, in March 2005, and the subsequent 10 years of operation.As usual, the dam safety control is performed by considering the data provided by the monitoring system, which is analysed and interpreted with the support of numerical models. These activities are particularly relevant during the first filling of the reservoir, which is a real load testing, and during the first years of operation, when the dam

O Laboratório Nacional de Engenharia Civil (LNEC), desde a sua criação, em 1946, tem dado um apoio significativo ao projeto, à construção e à exploração de barragens de betão e obras subterrâneas associadas, tanto em Portugal como no estrangeiro. Esta atividade tem sido muito diversificada e abrange todas as fases de vida das obras, podendo salientar-se os estudos e atividades relacionados com a caracterização dos maciços rochosos, a definição de formas estruturais e hidráulicas, utilizando modelação física e matemática, a análise estrutural por métodos experimentais e numéricos, a observação do comportamento e o controlo da segurança. No sentido de reduzir a dependência energética de Portugal, nos últimos anos tem vindo a ser aumentada a capacidade de produção hidroelétrica, com o reforço de potência de aproveitamentos existentes e com a construção de novos aproveitamentos. O presente trabalho apresenta os aspetos principais de algumas obras em que o LNEC tem estado envolvido, colaborando com a autoridade nacional, os donos de obra, os projetistas e os construtores. As atividades descritas têm vindo a ser desenvolvidas por uma vasta equipa de especialistas do LNEC, entre os quais se incluem os autores do presente trabalho.

The Baixo Sabor dam, whose construction ended in 2014, is a double curvature concrete arch dam 123 m high, built and owned by EDP Produção (a company of EDP-Energias de Portugal Group) in Sabor river, one of the right side tributaries of the river Douro in the North of Portugal. This structure creates a large reservoir whose first filling took place between 2015 and 2016. The estimate of the modal properties of this structure has been developed on the basis of two alternative procedures: (1) the performance of forced vibration tests based on the use of an eccentric mass vibrator and (2) the implementation of a vibration based structural health monitoring system, involving 20 uniaxial accelerometers, used to observe the dam behaviour during the first filling of the reservoir and the two first years of operation. This paper, apart from making a brief description of the dynamic tests performed, as well as, of the main characteristics of the monitoring system and results obtained during the first months of operation, presents a comparative analysis between the modal estimates achieved by the input-output and output-only modal identification techniques employed using the data associated to the performance of the forced vibration tests.

The Baixo Sabor hydroelectric power plant, located in the northeast of Portugal, includes a reservoir with a storage capacity of 630 million m3 of water created by a concrete double-curvature arch dam, 100 m high, which was equipped with a vibration based structural health monitoring system. This system involves 20 uni-axial accelerometers, 12 of them radially disposed in a gallery close to the dam crest, and the other 8 radially placed along two other galleries. The accelerometers are connected to a set of digitizers distributed in the three instrumented galleries and synchronized by GPS. This paper presents the main characteristics of the monitoring system and the results obtained during the first 18 months of operation, which include the first filling of the reservoir. These results include in particular the characterization of the accelerations amplitude and the evolution of the dam modal parameters (natural frequencies, modal damping ratios and mode shapes), as well as of the influence of the water level and tem-perature on the modal parameters. Suitable statistical models are applied to mitigate those effects in order to obtain time series of natural frequencies suitable for detection of structural changes.

No 14º encontro internacional de modelação numérica em barragens, organizado pela ICOLD, foi proposta a análise numérica de uma barragem de betão em arco localizada na Suécia sujeita a gradientes térmicos significativos ao longo do ano. Nesta comunicação apresentam-se os resultados numéricos obtidos com base numa discretização mais refinada do corpo da barragem, quando comparada com o modelo adotado no encontro internacional.A análise térmica transiente é realizada com um modelo de elementos finitos com condições de fronteira de Dirichlet (betão/água e fundação/água) e condições de fronteira de Robin (betão/ar e fundação/ar). A análise mecânica não linear é realizada numa primeira fase com elementos finitos do tipo cubo de 8 nós tendo por base os gradientes de temperatura obtidos na análise térmica. A armadura existente no paramento de montante e no paramento de jusante é modelada com elementos planos quadrangulares cujos pontos nodais se encontram rigidamente ligados aos elementos de volume tipo cubo. De modo a simular adequadamente o comportamento da ligação da barragem à fundação considerou-se de forma explícita a interface barragem/fundação mediante elementos de junta.Os resultados da análise mecânica realizada com um modelo de fenda discreta, em que se admite que cada elemento finito do tipo cubo adotado na discretização da barragem interage com os elementos vizinhos através de elementos de junta com comportamento não linear em tração e corte, são comparados com as observações in situ. Verifica-se que o modelo estrutural mais refinado permite obter resultados mais próximos dos observados, nomeadamente a distribuição de fendilhação no paramento de jusante e o campo de deslocamentos. Analisa-se ainda o efeito das armaduras distribuídas colocadas junto ao paramento de montante e ao paramento de jusante no controlo de deformação e fendilhação.

Pretende-se com este trabalho estudar o efeito das vibrações provocadas pelas explosões devidas a desmontes no comportamento da barragem de betão e respetiva fundação, avaliando a sua seguran-ça estrutural através de um modelo numérico híbrido descontínuo de elementos discretos e elemen-tos finitos recorrendo ao 3DEC.Apresentam-se os resultados do modelo numérico comparando-o com as medições de velocidades efetuadas no decorrer das obras envolvendo desmontes a fogo, sendo posteriormente analisado os efeitos na barragem. O presente trabalho deu origem ao desenvolvimento de um modelo numérico capaz de representar a resposta da estrutura às vibrações, minimizando a subjetividade da classifica-ção do seu grau de resistência.

O dimensionamento de barragens, de acordo com a regulamentação portuguesa, engloba a verifica-ção da segurança da obra para diversos cenários de rotura. Nesta comunicação, apresenta-se um exemplo de aplicação conjunta de métodos experimentais e numéricos para: i) determinação do coe-ficiente de segurança de uma barragem abóbada num cenário de rotura por deslizamento de parte do maciço de fundação para ações estáticas, ii) o estudo do comportamento dinâmico até à rotura uma barragem de gravidade por deslizamento ao longo da fundação. Os resultados experimentais foram comparados com os obtidos a partir de modelações matemáticas devidamente calibradas.

This paper presents the Hydropower Scheme of Baixo Sabor, a brief description of the tectonic framework scheme area, the studies to predict the seismic actions envisaging the dam

Masonry is a combination of units such as stones, bricks or blocks usually laid in a cementitious or limemortar. It is probably the oldest material used in construction and has proven to be both simple to buildand durable. Over the years, existing masonry constructions have inevitably suffered damage with time.Earthquakes, soil settlements, material degradation and lack of maintenance are the main reasons forthat. Careful and periodic assessment of such structures is necessary in order to evaluate their structuralcapacity and safety levels. However, performing the structural analysis of masonry construction is notan easy task. A review is presented of the main models based on the discrete element method and the available related numerical techniques that have been proposed for the analysis of masonry. The essential assumptions adopted by these models and numerical implementation issues are discussed. Differences between available models are illustrated by applications to various masonry problems including static and dynamic analysis of masonry arch bridges, walls, vaults, domes and ancient colonnades.This book is composed of 17 chapters authored/co-authored by 25 outstanding researchers from 11countries (Canada, France, Greece, Hungary, Iran,Italy, Mexico, Norway, Portugal, UK, USA), whichwere reviewed by 60 referees.

N/A

This chapter consists of two parts. First a general overview is given: the exact definition of the Discrete Element Method is provided, and the main types of existing models are introduced; then the theoretical fundaments of the most important approaches available today for masonry analysis are given. The second part of the chapter focuses on 3DEC, the most widespread commercial DEM code for masonry analysis. This second part begins with a theoretical overview. Application issues for masonry structures are then considered (block material behaviour, contact representation, structural elements like cables or bars etc.). Among the practical examples arches, barrel vaults, walls, coloumns and complete structures (like houses) are presented, including the issues of quasi-static versus dynamic analysis and of block fracture as well. The readers can find helpful advice on how to simulate their own problems most effectively.

N/A

Discrete element models have become a major tool for masonry analysis, allowing a suitable representation of its discontinuous nature and marked nonlinear behaviour. The chapter reviews the fundamental assumptions of the main DEM formulations available. It focuses more specifically on the widely used UDEC and 3DEC codes, explaining their relation with the other approaches, and the most relevant issues arising in their application to masonry. Applications to the main types of structures are reviewed, considering both static and dynamic analyses. Recent research providing comparisons of the numerical models with experimental and field data is particularly covered. The discussion of the different examples is aimed at clarifying the key capabilities of DEM and demonstrating the most effective ways of using it in a variety of masonry analysis situations.

This chapter is focused on the Portuguese experience on the developmentand exploration of systems for continuously monitoring dam vibrations, usingaccelerometers. The pioneer system for seismic and structural health monitoring(SSHM) installed in Cabril dam (the highest Portuguese arch dam: 132 m high) isdescribed in detail. The design of this system was the result of a long-term LNECresearch program, still ongoing. These monitoring systems should include softwaredeveloped to automatically perform the analysis of collected data, including theautomatic comparison with numerical results from 3DFE models. In view of thegood results obtained with the system in operation in Cabril dam since 2008, similarsystems have been installed in other large dams in Portugal, particularly in recentlybuilt dams. Finally, Baixo Sabor dam is presented as an example of a new Portuguesedam with a complete SSHM system, in operation since 2015. Themain experimentalresults obtained for both dams are shown, namely the evolution of natural frequenciesover time, mode shapes and the measured seismic response to earthquake events.

Para verificação do cumprimento das exigências de segurança das barragens,tanto relativamente à funcionalidade (cenários correntes), como em relação àsegurança ao colapso (cenários de rotura), é essencial utilizar modelos de simulação oude interpretação (no caso de obras existentes) do seu comportamento. Estes modelossão idealizações (simplificações) da realidade, tanto no que diz respeito às acções(modelos das acções), como no que respeita à componente estrutural (modelos estruturais).A solução destes modelos, através de adequados métodos de análise, quantificaparâmetros da resposta das estruturas que permitem avaliar a sua segurança, utilizandocritérios de segurança previamente definidos.A validação destes modelos pode ser feita, no caso de cenários correntes,através da sua comparação com os resultados da observação do comportamento debarragens. No caso de cenários de rotura, não existe muita experiência de comparaçãodestes resultados com situações reais: é pequeno o número de acidentes ocorrido e,mesmo nestes, o volume de informação é reduzido. Desta forma, o recurso a métodosexperimentais, para o estudo de cenários de rotura, tem uma importância acrescida.Assim o principal objectivo deste trabalho é contribuir para melhorar a capacidade deavaliação da segurança de barragens de betão envolvendo cenários de rotura pela fundação.Neste trabalho desenvolveram-se dois ensaios experimentais em modelosfísicos: um primeiro envolvendo uma barragem abóbada, para o estudo de cenários derotura da fundação para acções estáticas; e um segundo de uma barragem gravidadeensaiado em mesa sísmica, com vista a estudar a rotura pela fundação para acçõesdinâmicas.A previsão e interpretação dos ensaios foram efectuadas com modelosmatemáticos adequados, que permitiram a sua validação e posterior utilização no estudode outros cenários.

Neste trabalho apresenta-se o sistema para monitorização em contínuo do comportamento dinâmico da barragem do Cabril que foi instalado em 2008, pelo LNEC e pela EDP, referindo alguns dos principais resultados que têm sido obtidos a partir da análise dos dados recolhidos, quer sob excitação ambiente/operacional, quer sob ações sísmicas. Salienta-se a importância do desenvolvimento do software para tratamento, análise e gestão automática dos dados e apresentam-se os programas que têm vindo a ser desenvolvidos no LNEC, em MATLAB, para apoio a este tipo de sistemas, nomeadamente programas de identificação modal (Modal_ID2.0 e Modal_ID_Auto2.0) e programas de elementos finitos tridimensionais para análise do comportamento dinâmico de sistemas barragem-fundação-albufeira (DamDySSA2.0).

This document presents the research plan for the doctoral thesis of LNEC's Junior Research Fellow Margarida Espada. This work, to be submitted to the Faculty of Engineering of the University of Porto (FEUP), will be developed in the Modelling and Rock Mechanics Unit of the Concrete Dams Department, and it is part of the on-going P2I research project DEMRock6m. This work aims at developing more efficient methodologies to perform safety studies and seismic analysis of rock engineering structures, based on discrete element models and in the integrated use of probabilistic models for the geometric and shear strength parameters and for the water pressures in rock discontinuities. This will allow a more realistic definition of the rock mass in discrete element models and an adequate identification of the potential failure mechanisms.

Neste relatório é apresentado o método de Euler para calcular as órbitas do sistema n-corpos,por exemplo, o dos planetas do sistema Solar, tendo em conta a propagação das forçasgravíticas entre o Sol e os planetas e entre os planetas entre si. Apenas requer como dadosiniciais uma observação anterior das órbitas em termos de posição e velocidade. A correcçãoda interacção entre planetas não é suavizada, o que se justifica pelos seus valores. A correcçãorelativista é importante.

As equações de Navier-Stokes são equações de derivadas parciais. As incógnitas nocaso de incompressibilidade consistem no campo de velocidades. As pressões numa 1ªaproximação resultam de um equilíbrio estático.A principal causa de problemas relacionados com a solução destas equações é devida àparcela das acelerações convectivas que está na origem da turbulência.Pesando estas equações e integrando duas vezes por partes obtém-se uma forma fracadestas equações.Em problemas 3D as variáveis independentes são 3 espaciais e 1 temporal. Admite-seque o campo de velocidades pode ser desenvolvido em série de distribuições de Delta deDirac espaciais e suas derivadas com coeficientes funções do tempo. Com funções deteste polinomiais obtém-se a formulação distribucional proposta das equações deNavier-Stokes.

N/A

O objectivo deste relatório é o estudo da matemática aplicada à solução de problemasfísicos de propagação de ondas esféricas com operador espacial biharmónico,consideradas quânticas.As técnicas matemáticas usadas incluem a transformada de Laplace da função de ondaf e o cálculo de sua inversa tal como sugerida por Pipes e Harvill.O método matemático usado para descrever as ondas esféricas quânticas é compequenas adaptações o método causal não-linear descrito por Croca.

N/A

N/A

N/A

A análise do comportamento de barragens de betão com base em modelos de elementos finitos tridimensionais exige a definição da discretização a adoptar para o conjunto barragem-fundação, ou barragem-fundação-albufeira. A realização desta tarefa sem o recurso a programas de geração automática é muito dispendiosa pelo que tem vindo a ser desenvolvido no NMMF um módulo computacional para geração automática de malhas de elementos finitos tridimensionais especialmente adaptado para a geração de malhas tridimensionais de barragens abóbada. Inicialmente desenvolvido em FORTRAN, o referido módulo computacional para geração de malhas de elementos finitos tridimensionais tem vindo a ser objecto de diversos melhoramentos, os mais recentes centrados ao nível da interface com o utilizador. Assim, apresenta-se neste relatório o módulo computacional

This document presents a back analysis procedure for identification of the elastic parameters of transversely isotropic rock cores, containing an overcoring triaxial strain probe, from the strains measured during a biaxial test. A three-dimensional finite element model was developed to simulate the biaxial test on the overcored rock specimen and to compute the strains at the location of the strain gauges. Different optimisation algorithms were tested and the most suitable one was selected. The back analysis procedure was tested for identification of the five elastic parameters and the two orientation angles that characterise a transversely isotropic rock core. In spite that, with the developed methodology, convergence was reached and all those parameters could be identified, sensitivity analyses demonstrated that the results obtained were not stable and therefore they were not reliable. By introducing constrains based on common practice and previous experience, a stable and robust methodology was achieved: the three elastic parameters, E1, E2 and ?2, are reliably identified using the value of G2 calculated with Saint-Venant’s expression and a fixed value of ?1, while the orientation parameters are obtained from observation of overcored rock. Analysis of the results shows that application of this methodology represents an enormous step forward when compared with the traditional use of isotropy. Besides, the methodology is general and can also be used with other types of overcoring equipment. The five elastic parameters and the two orientation angles obtained can then be used, together with the overcoring strains, to compute the complete in situ state of stress.

This document presents the work developed by the PhD student Margarida Espada in the scope of the course unit Risk Analysis in Geotechnical Works of the Doctoral Program in Civil Engineering of the Faculty of Engineering of the University of Porto (FEUP). This work presents a reliability analysis, using the response surface method (RSM), for the case study of the left bank excavation slopes of the Baihetan arch dam foundation, which is one of the case studies of Margarida Espada's PhD thesis. The aim was to approximate an implicit limit state function by computing safety factors, using a discrete element model of the Baihetan left bank developed in 3DEC software, where the shear strength parameters of two important rock discontinuities were considered as random variables. The probability of failure was then obtained through an iterative process, using approximation methods. This work presents the 3DEC model developed to analyse the stability conditions in the Baihetan left bank and the results of the reliability analysis.

O problema da solução das equações de Navier Stokes é abordado neste trabalhopropondo-se uma técnica de representação das incógnitas deslocamentos e pressõesvariáveis no espaço e no tempo em série de Delta de Dirac e suas derivadas no tempocujos coeficientes se determinam com base na solução de sistemas de equaçõesdiferenciais definidos no espaço (problema com três variáveis espaciais independentesque pode ser estudado pelo método de Monge).

Neste relatório apresentam-se as equações básicas da elastodinâmica linear, as soluçõesfundamentais e o teorema da representação no domínio de tempo e de frequência.Para movimentos finitos de casca formula-se o teorema dos trabalhos virtuais e a suaimplementação pelo método dos elementos finitos.

Neste relatório apresentam-se os principais aspectos da modelação sísmica de barragensabóbada. Assim propõe-se: modelos numéricos de geração de sismos por uma falha; aforma como o sismo actua na barragem; modelos para estudar a influência da albufeirana vibração do conjunto; métodos para solução das equações do movimento; e novasformulações de elementos finitos para o problema estrutural.

In pressure tunnels and shafts, in addition to the mechanical effect that excavation has on the rock mass and the disturbance that it introduces in the water flow, also the contained water can interact from the mechanical and hydraulic points of view with the rock mass. Seepage in fractured rock masses is dominated by the flow that takes place through the joints, and this is highly d(;pendent on their properties, namely aperture and roughness. Joint aperture, in tum, i::; very sensitive to stress changes. Special attention must therefore be paid to the joints in hydromechanical analyses. In this report are presented some studies that were carried out for the hydromechanical characterization of joints of the Alto Lindoso rock mass and numerical simulations of the hydromechanical behaviour of two selected sections of the high pressure circuit.