Artigos de Revista
Info
Assessment of contact laws accounting for softening in 3D rigid concrete particle models
o obtain predictions closer to concrete behaviour, it is necessary to employ a particle model(PM) that considers contact softening. A bilinear softening contact model (BL) has been adoptedin PM studies. Several limitations in PM predictions have been identified that may be due to BLassumptions. For this reason, this paper compares BL predictions with those obtained with morecomplex models to assess if PM predictions can be improved. As shown, it is possible to calibrateeach contact model to reproduce the complex behaviour observed in concrete in uniaxial and biaxialloading. The predicted responses are similar, and the known PM limitations still occur independentlyof the adopted model. Under biaxial loading, it is shown that a response closer to that observed inconcrete can be obtained (higher normal-to-stiffness ratio of
Ano: 2024
Número Páginas:
29p..
Autor(es): Azevedo, N.; Braga Farinha, M. L.; Oliveira, S.
Revista: Buildings
Editor: MDPI
Volume:
14.
Keywords: concrete fracture; contact softening laws; discrete element; particle model
Info
3D dem model simulation of asphalt mastics with sunflower oil
A three-dimensional particle model, based on the asphalt mastic micro-structure representation following a discrete element model framework, was developed to investigate the influence of sunflower oil (rejuvenator) on the rheological properties of asphalt mastic. Dynamic shear rheometer tests in laboratory, for a frequency range of 0.1
Ano: 2023
Autor(es): Câmara, G.; Micaelo, R.; Azevedo, N.
Revista: Computational Particle Mechanics
Editor: Springer
Keywords: Sunflower oil; Self-healing; Viscoelasticity; Generalized Kelvin model; Discrete element model; Asphalt mastic
Info
Analysis and prediction of masonry wallette strength under combined compression-bending via stochastic computational modeling
The out-of-plane flexural bending capacity of masonry is a fundamental property for understanding the behavior of masonry structures. This study investigates the behavior of unreinforced masonry wallettes subjected to combined compression-flexural loading using the discrete element method (DEM), and provides a novel framework to estimate the masonry strength. A simplified micro-modeling strategy is utilized to analyze a masonry wallette, including the variation of the mechanical properties in masonry units and joints. Stochastic DEM analyses are performed to simulate brickwork assemblages, assuming a strong unit-weak joint material model typical of most masonry buildings, including historical ones. Once the proposed computational approach is validated against the experimental findings, the effect of spatial and non-spatial variation of mechanical properties is explored. Two failure types are identified: joint failure and brick failure. For each failure mechanism, the variability of the response and the effects of the modeling parameters on the load-carrying capacity is quantified. Afterward, Lasso regression is employed to determine predictive equations in terms of the material properties and vertical pressure on the wallette. The results show that the most important parameters changing the response are the joint tensile strength and the amount of vertical stress for joint failure, whereas the unit tensile strength dominates the response for brick failure. Overall, this research proposes a novel framework adopting validated advanced computational models that feed on simple test results to generate data that is further utilized for training response prediction models for complex structures.
Ano: 2023
Autor(es): Gonen, S.; Pulatsu, B.; Lourenço, P.; Lemos, J. V.; Tuncay, K.; Erduran, E.
Editor: Elsevier
Keywords: Masonry
Info
Application of Bonded-Block Models to Rock Failure Analysis
Discrete element models are being increasingly applied to model rock failure processes.Bonded-particle models, based on circular or spherical particle systems, have been successfully usedfor two decades. More recently, bonded-block models, using polygonal or polyhedral elements, have proven to be a powerful alternative. This paper describes the basis of the application of these models in the numerical simulation of failure in rock materials. The critical governing parameters are identified, and their influence is discussed. The model calibration procedure based on the analysis of laboratory tests is discussed. An application example of an underground excavation problem is presented using a simple bonded-block model employing rigid blocks and a bilinear softening contact model. The results show the capability of this approach to reproduce observed failure modes involving block fractures.
Ano: 2023
Autor(es): Lemos, J. V.
Editor: MDPI
Keywords: rock mechanics
Info
Dynamic analysis of masonry arches using Maxwell damping
Masonry arches are a fundamental component of historical structures. The assessment of the vulnerability ofthese heritage constructions to seismic loading requires reliable and efficient numerical models. Discrete element models are an alternative to finite element models, being particularly effective in modelling collapse mechanisms created by shearing and separation of the units along the joints. Discrete element codes typically rely on explicit methods of integration of the equations of motion for dynamic analysis, which may require large run times when the recommended stiffness-proportional component of Rayleigh damping is applied. A novel approach is proposed using an alternative damping model, Maxwell damping, which involves placing multiple spring-dashpot elements in the joints, in parallel with the standard stiffness springs. This damping model is tested in the dynamic analysis of masonry arches, under pulse and earthquake loading. The results obtained in this early investigation show a good performance in the simulation of collapse under dynamic loads, in general agreement with the analyses conducted with classical stiffness-proportional damping, but reducing significantly the computational effort.
Ano: 2023
Autor(es): Lemos, J. V.; Sarhosis, V.
Revista: Structures
Editor: Elsevier
Keywords: Masonry arches
Info
Generalised kelvin contact models for DEM modelling of asphalt mixtures
Rigid particle models based on the discrete element method (DEM) have been adopted to model creep, fracture, and the viscoelastic behaviour of asphalt mixtures considering an irregular micro-structure and particle contacts. Within a DEM framework, the Burgers contact model, which is known to have a narrow frequency and temperature range, is usually adopted to model viscoelastic properties. In this study, a new explicit three-dimensional generalised Kelvin (GK) contact model formulation for the DEM model is proposed for asphalt materials. The model is implemented following two different methodologies (GK and GK). The models are validated in uniaxial tension-compression sinusoidal tests for predicting the dynamic modulus () and phase angle (
Ano: 2023
Número Páginas:
15p.
Autor(es): Câmara, G.; Azevedo, N.; Micaelo, R.; Silva, H
Editor: Taylor & Francis
Volume:
24 (1).
Keywords: dynamicbehaviour; viscoelasticity; three-dimensional model; discrete element method; Asphalt mixture
Info
Impact of Rejuvenator-Modified Mastic on Asphalt Mixture Stiffness: Meso-Scale Discrete Element Method Approach
Encapsulated rejuvenators embedded in asphalt mixtures are a promising technology toextend the service life of asphalt pavements. However, their effects on the asphalt mixture
Ano: 2023
Número Páginas:
22p..
Autor(es): Câmara, G.; Azevedo, N.; Micaelo, R.
Revista: Buildings
Editor: MDPI
Volume:
13.
Keywords: capsules; encapsulated rejuvenator; rejuvenator-modified mastic; asphalt mixture; self-healing; discrete element modeling
Info
Numerical evaluation of transverse steel connector strengthening effect on the behavior of rubble stone masonry walls under compression using a particle model
The structural rehabilitation of historic/traditional rubble masonry wall constructionsrequires consolidation and retrofitting solutions to be employed in order to withstand dynamic loads,high vertical loads, and differential settlements. One of these strengthening techniques is basedon the use of steel bar connectors perpendicular to the wall, considered individually or integratedinto more complex strengthening techniques. The aim of this study is to evaluate numerically thestrengthening effect of transverse steel connectors on rubble masonry walls. With this purpose, a 2Dparticle-reinforced model (2D-PMR) was devised and applied to model uniaxial compression tests.The results presented show that predictions calculated using the proposed 2D-PMR model are veryclose to known experimental results, particularly in the corresponding failure modes, the increase ofthe maximum uniaxial compression value, and ductility. Parametric studies are also conducted byvarying the diameter of the steel bars and the level of strengthening to assess the influence of thebar-bond effect and lateral plates. The presented parametric numerical studies show that (i) a two-level strengthening solution guarantees a similar response to the three-level strengthening solutionadopted in the experiments; (ii) it is not relevant to apply a grout injection during the applicationprocess of the steel connectors if lateral plates are adopted; and (iii) the 2D-PMR model can be usedin the definition of the steel bar diameter and properties; as shown, a smaller (8 mm) bar diameterpredicts a similar strengthening effect to the (12 mm) bar size adopted in the experiments. Given theperformance of the proposed 2D-PMR model, further work is underway that will allow the 2D-PMRmodel to numerically assess other reinforcement techniques, namely, reinforced micro-concrete layersand textile reinforced mortar.
Ano: 2023
Número Páginas:
27p.
Autor(es): Cismasiu, I.; Azevedo, N.; Pinho, F.
Editor: MDPI
Keywords: uniaxial compression; transverse steel connectors; strengthening; rubble-stone masonry; particle model
Info
Site Specific Hazard Assessment and Multi-Level Seismic Performance Evaluation of Historical Mosque
This study highlights the continued need for numerical simulation methods to predict the earthquakeresponse and damage of masonry mosques, despite recent advances in research. TheKamanl
Ano: 2023
Autor(es): Saygili, O.; Lemos, J. V.; Moghimi, S.
Editor: Taylor & Francis
Keywords: seismic vulnerability
Info
A flexible particle model for rock fracture: Validation and assessment of the Influence of deformability on the macroscopic response
Circular/spherical rigid particle models that were initially applied to rock fracture studieswere not able to match the ratio of the compressive strength to tensile strength that occurs in rock.In addition, the predicted macroscopic friction angle was much lower than the known hard rockexperimental values. Several enhancements have been proposed to address these issues, namelythe use of a clumped particle logic or the adoption of polygonal/polyhedral grain structures, eitherrigid or flexible. In this work, a flexible 2D DEM based particle model (PM) that allows deformableparticles to interact in a simplified way is presented. The proposed flexible PM model keeps thecontact interaction simplicity and the reduced computational costs characteristic of circular rigidparticle models. The PM model is tested using biaxial tests and Brazilian tests. A discussion re-garding the influence of the grain deformability on the macroscopic elastic and strength response ispresented. It is shown that, when compared with a rigid model, the proposed flexible PM modelpredicts more reasonable indirect tensile strength to direct tensile strength ratio and requires asmaller value of contact fracture energy to give a good agreement with known experimental data.It is also shown that the proposed flexible PM model can predict a behaviour similar to that ob-tained using a flexible PM model through inner particle discretization that is more computationallydemanding.
Ano: 2022
Número Páginas:
27p.
Autor(es): Azevedo, N.; Braga Farinha, M. L.; Oliveira, S.
Revista: Geotechnics
Editor: MDPI
Volume:
2.
Keywords: grain deformability; discrete element; particle model; fracture; rock
|
Comunicações
Info
Modelação da fendilhação por origem térmica de uma barragem de betão em arco
No 14º encontro internacional de modelação numérica em barragens, organizado pela ICOLD, foi proposta a análise numérica de uma barragem de betão em arco localizada na Suécia sujeita a gradientes térmicos significativos ao longo do ano. Nesta comunicação apresentam-se os resultados numéricos obtidos com base numa discretização mais refinada do corpo da barragem, quando comparada com o modelo adotado no encontro internacional.A análise térmica transiente é realizada com um modelo de elementos finitos com condições de fronteira de Dirichlet (betão/água e fundação/água) e condições de fronteira de Robin (betão/ar e fundação/ar). A análise mecânica não linear é realizada numa primeira fase com elementos finitos do tipo cubo de 8 nós tendo por base os gradientes de temperatura obtidos na análise térmica. A armadura existente no paramento de montante e no paramento de jusante é modelada com elementos planos quadrangulares cujos pontos nodais se encontram rigidamente ligados aos elementos de volume tipo cubo. De modo a simular adequadamente o comportamento da ligação da barragem à fundação considerou-se de forma explícita a interface barragem/fundação mediante elementos de junta.Os resultados da análise mecânica realizada com um modelo de fenda discreta, em que se admite que cada elemento finito do tipo cubo adotado na discretização da barragem interage com os elementos vizinhos através de elementos de junta com comportamento não linear em tração e corte, são comparados com as observações in situ. Verifica-se que o modelo estrutural mais refinado permite obter resultados mais próximos dos observados, nomeadamente a distribuição de fendilhação no paramento de jusante e o campo de deslocamentos. Analisa-se ainda o efeito das armaduras distribuídas colocadas junto ao paramento de montante e ao paramento de jusante no controlo de deformação e fendilhação.
Ano: 2018
Autor(es): Azevedo, N.; Santos, E.; Leitão, N. S.; Braga Farinha, M. L.; Câmara, R.
Editor: GPBE - Grupo Português de Betão Estrutural
Keywords: Modelo de fenda discreta; Barragens de betão; Análise térmica
Info
Modelação do maciço rochoso para avaliação do comportamento de barragens de betão sujeitas a vibrações explosivas
Pretende-se com este trabalho estudar o efeito das vibrações provocadas pelas explosões devidas a desmontes no comportamento da barragem de betão e respetiva fundação, avaliando a sua seguran-ça estrutural através de um modelo numérico híbrido descontínuo de elementos discretos e elemen-tos finitos recorrendo ao 3DEC.Apresentam-se os resultados do modelo numérico comparando-o com as medições de velocidades efetuadas no decorrer das obras envolvendo desmontes a fogo, sendo posteriormente analisado os efeitos na barragem. O presente trabalho deu origem ao desenvolvimento de um modelo numérico capaz de representar a resposta da estrutura às vibrações, minimizando a subjetividade da classifica-ção do seu grau de resistência.
Ano: 2018
Autor(es): Fonseca, R.; Gomes, J. P.; Lemos, J. V.; Resende, R.
Editor: Associação Brasileira de Mecânica dos Solos
Keywords: Método elementos discretos; Modelação numérica; Análise dinâmica; Explosivos; Vibrações; Barragens
Info
Modelação numérica e experimental da rotura pela fundação de barragens de betão para ações estáticas e dinâmicas
O dimensionamento de barragens, de acordo com a regulamentação portuguesa, engloba a verifica-ção da segurança da obra para diversos cenários de rotura. Nesta comunicação, apresenta-se um exemplo de aplicação conjunta de métodos experimentais e numéricos para: i) determinação do coe-ficiente de segurança de uma barragem abóbada num cenário de rotura por deslizamento de parte do maciço de fundação para ações estáticas, ii) o estudo do comportamento dinâmico até à rotura uma barragem de gravidade por deslizamento ao longo da fundação. Os resultados experimentais foram comparados com os obtidos a partir de modelações matemáticas devidamente calibradas.
Ano: 2018
Autor(es): Gomes, J. P.; Lemos, J. V.
Editor: Associação Brasileira de Mecânica dos Solos
Keywords: Modelos numéricos; Modelos físicos; Rotura pela fundação; Barragens de betão
Info
Seismic monitoring system of Baixo Sabor scheme for structural dynamic behaviour monitoring and risk management
This paper presents the Hydropower Scheme of Baixo Sabor, a brief description of the tectonic framework scheme area, the studies to predict the seismic actions envisaging the dam
Ano: 2018
Autor(es): Gomes, J. P.; Magalhães, F.; Monteiro, G.; Palma, J.; Pereira, S.; Matos , D.
Editor: ICOLD 2018
Keywords: Concrete dam; Seismicity; Seismic hazard; Safety of dams; Induced seismicity; Feiticeiro dam; Dynamic monitoring; Baixo Sabor dam; Automated monitoring
Info
Installation and results from the first 6 months of operation of the dynamic monitoring system of Baixo Sabor arch dam
The Baixo Sabor hydroelectric power plant, located in the northeast of Portugal, includes a reservoir with a storage capacity of 630 million m3 of water created by a concrete double-curvature arch dam, 100 m high, which was equipped with a 20-channel vibration based structural health monitoring system.This paper, apart from describing the dam, presents the main characteristics of the monitoring system and the results obtained during the first 6 months of operation and the first filling of the reservoir. These results include in particular the characterization of the accelerations amplitude and the evolution of the dam modal parameters (natural frequencies, modal damping ratios and mode shapes). It is particular interesting to observe the influence of the water level on the modal parameters and the development of statistical models to mitigate this effect.
Ano: 2017
Autor(es): Pereira, S.; Magalhães, F.; Gomes, J. P.; Cunha, A.; Lemos, J. V.
Editor: Sapienza University of Rome
Keywords: Operational modal analysis; Dynamic monitoring; Arch dam
Info
Non-linear earthquake response of three minarets in Istanbul
Minarets are important elements of mosques. These slender structures have suffered notable damage as a result of past earthquakes. In this paper three historical masonry minarets located in Istanbul, Turkey are studied in the inelastic range using the Discrete Element Method. They are the minarets of the Hagia Sophia Museum, Süleymaniye Mosque and Mihrimah Sultan Mosque. The selected minarets are 16th century structures having different heights and body diameters. Dynamic behavior is simulated by means of ten different loading configurations as real and simulated earthquake time histories. Nonlinear dynamic response is characterized by the relative horizontal and normal dislocations of adjacent drums along the minaret body, as well as by its top displacement, all normalized by the body diameter. Damage patterns and collapse mechanisms are studied.
Ano: 2017
Autor(es): Cakti, E.; Saygili, O.; Oliveira, C.S.; Lemos, J. V.
Editor: 16WCEE
Keywords: Nonlinear dynamic modelling; Masonry; Slender structures
Info
Non-linear earthquake response of three minarets in Istanbul
Minarets are important elements of mosques. These slender structures have suffered notable damage as a result of past earthquakes. In this paper three historical masonry minarets located in Istanbul, Turkey are studied in the inelastic range using the Discrete Element Method. They are the minarets of the Hagia Sophia Museum, Süleymaniye Mosque and Mihrimah Sultan Mosque. The selected minarets are 16th century structures having different heights and body diameters. Dynamic behavior is simulated by means of ten different loading configurations as real and simulated earthquake time histories. Nonlinear dynamic response is characterized by the relative horizontal and normal dislocations of adjacent drums along the minaret body, as well as by its top displacement, all normalized by the body diameter. Damage patterns and collapse mechanisms are studied.
Ano: 2017
Número Páginas:
Paper N° 2903.
Autor(es): Cakti, E.; Saygili, O.; Oliveira, C.S.; Lemos, J. V.
Editor: 16 WCEE
Keywords: Masonry; Slender structures
Info
Stress measurements for underground powerhouses
Release of the in situ state of stress is often the most relevant action during the excavation of underground structures in rock masses, such as powerhouse caverns for hydroelectric schemes, which are often excavated at great depth and have large dimensions. Design of the supports, namely using numerical models, requires an estimate of the magnitude and direction of the principal stresses. However, a large number of factors influence the in situ stress field and its characterisation is a difficult task. Besides, the number of tests carried out for determination of the in situ stresses in rock masses is usually small, due to cost and time constraints, and all the testing methods have limitations inherent to their nature.The paper presents methodologies for analysis of the stress field obtained from the results of in situ stress measurements using three methods: overcoring, hydraulic fracturing and flat jacks. These methodologies integrate all stress measurements and use numerical models of the rock mass that represent the ground topography, the lithology and the underground openings geometry, so that the most likely stress field in the zone of interest for the design of the underground openings is obtained. Instances of application to three underground powerhouses are presented.
Ano: 2017
Número Páginas:
24p.
Autor(es): Lamas, L.; Espada, M.; Figueiredo, B.; Muralha, J.
Editor: The Southern African Institute of Mining and Metallurgy
Keywords: Underground powerhouse; Stress measurements; Rock mechanics
Info
VGCM3D - A 3D rigid particle model for rock fracture following the Voronoi tessellation of the grain structure: Formulation and validation
Detailed particle models by taking into account the material grain structureexplicitly consider the material randomness, including a size limiter for damage localization.A VGMC3D contact model is presented that considers the polyhedral particle shape in anapproximate way. The VGCM3D flexible contact model is validated against knownexperimental data on a granite rock, namely triaxial tests and Brazilian tests.
Ano: 2017
Número Páginas:
99-110pp.
Autor(es): Candeias, M.; Azevedo, N.; Braga Farinha, M. L.
Editor: International Center for Numerical Methods in Engineering (CIMNE)
Keywords: Calibration; Particle shape; Particle models; Fracture
Info
Análise Sísmica da Igreja de Kuño Tambo
Esta comunicação apresenta um estudo sobre a vulnerabilidade sísmica da igreja deKuño Tambo (Peru) com recurso ao Método dos Elementos Discretos. A avaliação docomportamento sísmico da igreja foi efetuada através de dois modelos numéricos,nomeadamente: (a) Modelo da secção transversal da parede da nave considerando amorfologia do aparelho da alvenaria, tendo por objetivo avaliar o seu comportamentopara fora do plano; (b) Modelo 3D da fachada com parte das paredes ortogonais danave, tendo por objetivo avaliar a sua resposta para fora do plano. Os resultados daanálise permitiram concluir que a ligação entre paredes ortogonais têm influênciasignificativa no comportamento da fachada.
Ano: 2016
Autor(es): Mendes, N.; Zanotti, S.; Lourenço, P.; Lemos, J. V.
Editor: SPES
Keywords: Análise sísmica; Adobe; MED
|
Livros
Info
Computational modeling of masonry structures using the discrete element method
Masonry is a combination of units such as stones, bricks or blocks usually laid in a cementitious or limemortar. It is probably the oldest material used in construction and has proven to be both simple to buildand durable. Over the years, existing masonry constructions have inevitably suffered damage with time.Earthquakes, soil settlements, material degradation and lack of maintenance are the main reasons forthat. Careful and periodic assessment of such structures is necessary in order to evaluate their structuralcapacity and safety levels. However, performing the structural analysis of masonry construction is notan easy task. A review is presented of the main models based on the discrete element method and the available related numerical techniques that have been proposed for the analysis of masonry. The essential assumptions adopted by these models and numerical implementation issues are discussed. Differences between available models are illustrated by applications to various masonry problems including static and dynamic analysis of masonry arch bridges, walls, vaults, domes and ancient colonnades.This book is composed of 17 chapters authored/co-authored by 25 outstanding researchers from 11countries (Canada, France, Greece, Hungary, Iran,Italy, Mexico, Norway, Portugal, UK, USA), whichwere reviewed by 60 referees.
Ano: 2016
Número Páginas:
505p.
Autor(es): Sarhosis, V.; Bagi, K.; Lemos, J. V.; Milani, G.
Editor: IGI Global
Keywords: Elementos discretos; Modelação numérica; Alvenaria
Info
Contribuição de Manuel Rocha para a mecânica das rochas e as fundações de barragens
N/A
Ano: 2013
Número Páginas:
296pp.
Autor(es): Lemos, J. V.; Lamas, L.
Editor: LNEC
Keywords: Investigação científica e técnica; Barragem de betão; Fundação rochosa; Fundação de barragem; Mecânica das rochas; Pt
|
Capítulos de Livros
Info
Chapter 5 Discrete Element Modeling
This chapter consists of two parts. First a general overview is given: the exact definition of the Discrete Element Method is provided, and the main types of existing models are introduced; then the theoretical fundaments of the most important approaches available today for masonry analysis are given. The second part of the chapter focuses on 3DEC, the most widespread commercial DEM code for masonry analysis. This second part begins with a theoretical overview. Application issues for masonry structures are then considered (block material behaviour, contact representation, structural elements like cables or bars etc.). Among the practical examples arches, barrel vaults, walls, coloumns and complete structures (like houses) are presented, including the issues of quasi-static versus dynamic analysis and of block fracture as well. The readers can find helpful advice on how to simulate their own problems most effectively.
Ano: 2023
Autor(es): Lemos, J. V.; Bagi, K.
Revista: Discrete Computational Mechanics of Masonry Structures
Editor: Springer
Keywords: Masonry models
Info
Discrete Element Modelling of Masonry Arch Bridges, Arches and Vaults
N/A
Ano: 2022
Autor(es): Lemos, J. V.; Gobbin, F.; Forgacs, T.; Sarhosis, V.
Revista: From Corbel Arches to Double Curvature Vaults.
Editor: Springer
Keywords: numerical modelling; masonry
Info
DEM modelling of the non-linear static and dynamic response of masonry structures
Discrete element models have become a major tool for masonry analysis, allowing a suitable representation of its discontinuous nature and marked nonlinear behaviour. The chapter reviews the fundamental assumptions of the main DEM formulations available. It focuses more specifically on the widely used UDEC and 3DEC codes, explaining their relation with the other approaches, and the most relevant issues arising in their application to masonry. Applications to the main types of structures are reviewed, considering both static and dynamic analyses. Recent research providing comparisons of the numerical models with experimental and field data is particularly covered. The discussion of the different examples is aimed at clarifying the key capabilities of DEM and demonstrating the most effective ways of using it in a variety of masonry analysis situations.
Ano: 2019
Número Páginas:
469-501pp.
Autor(es): Sarhosis, V.; Lemos, J. V.; Bagi, K.
Revista: Numerical Modeling of Masonry and Historical Structures - From Theory to Application
Editor: Elsevier
Keywords: DEM; Masonry structures
Info
Seismic and Structural Health Monitoring of Dams in Portugal
This chapter is focused on the Portuguese experience on the developmentand exploration of systems for continuously monitoring dam vibrations, usingaccelerometers. The pioneer system for seismic and structural health monitoring(SSHM) installed in Cabril dam (the highest Portuguese arch dam: 132 m high) isdescribed in detail. The design of this system was the result of a long-term LNECresearch program, still ongoing. These monitoring systems should include softwaredeveloped to automatically perform the analysis of collected data, including theautomatic comparison with numerical results from 3DFE models. In view of thegood results obtained with the system in operation in Cabril dam since 2008, similarsystems have been installed in other large dams in Portugal, particularly in recentlybuilt dams. Finally, Baixo Sabor dam is presented as an example of a new Portuguesedam with a complete SSHM system, in operation since 2015. Themain experimentalresults obtained for both dams are shown, namely the evolution of natural frequenciesover time, mode shapes and the measured seismic response to earthquake events.
Ano: 2019
Número Páginas:
87-113pp..
Autor(es): Oliveira, S.; Alegre, A.
Revista: Seismic Structural Health Monitoring - From Theory to Successful Applications
Editor: Springer
Keywords: Modal identification · Concrete dams · Ambient and seismic vibrations
|
Teses de Doutoramento
Info
Análise experimental de cenários de rotura em fundações de barragens de betão
Para verificação do cumprimento das exigências de segurança das barragens,tanto relativamente à funcionalidade (cenários correntes), como em relação àsegurança ao colapso (cenários de rotura), é essencial utilizar modelos de simulação oude interpretação (no caso de obras existentes) do seu comportamento. Estes modelossão idealizações (simplificações) da realidade, tanto no que diz respeito às acções(modelos das acções), como no que respeita à componente estrutural (modelos estruturais).A solução destes modelos, através de adequados métodos de análise, quantificaparâmetros da resposta das estruturas que permitem avaliar a sua segurança, utilizandocritérios de segurança previamente definidos.A validação destes modelos pode ser feita, no caso de cenários correntes,através da sua comparação com os resultados da observação do comportamento debarragens. No caso de cenários de rotura, não existe muita experiência de comparaçãodestes resultados com situações reais: é pequeno o número de acidentes ocorrido e,mesmo nestes, o volume de informação é reduzido. Desta forma, o recurso a métodosexperimentais, para o estudo de cenários de rotura, tem uma importância acrescida.Assim o principal objectivo deste trabalho é contribuir para melhorar a capacidade deavaliação da segurança de barragens de betão envolvendo cenários de rotura pela fundação.Neste trabalho desenvolveram-se dois ensaios experimentais em modelosfísicos: um primeiro envolvendo uma barragem abóbada, para o estudo de cenários derotura da fundação para acções estáticas; e um segundo de uma barragem gravidadeensaiado em mesa sísmica, com vista a estudar a rotura pela fundação para acçõesdinâmicas.A previsão e interpretação dos ensaios foram efectuadas com modelosmatemáticos adequados, que permitiram a sua validação e posterior utilização no estudode outros cenários.
Ano: 2009
Autor(es): Gomes, J. P.
Keywords: Método dos elementos discretos; Método dos elementos finitos; Modelos numéricos; Mesa sísmica; Análise dimensional; Modelos físicos; Análise até à rotura; Controlo da segurança de barragens; Barragens de betão
|
|
Relatórios
Info
DEMRock6m
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto DEMRock6m do P2I/LNEC 2013-2020. Os resultados da atividade desenvolvida são analisados e avaliados em face dos objetivos inicialmente previstos.
Ano: 2024
Autor(es): Muralha, J.; Lemos, J. V.; Lamas, L.
Keywords: Estruturas de alvenaria; Barragens de betão; DEMRock6m; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
MEBAD
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto MEBAD do P2I/LNEC 2013-2020, no período 2016-2023. Os resultados da atividade são analisados e avaliados, em face dos objetivos previstos.
Ano: 2023
Autor(es): Lemos, J. V.; Batista, A. L.; Gomes, J. P.
Keywords: Estruturas de alvenaria; Barragens de betão; MEBAD; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
RockGeoStat
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto RockGeoStat do P2I/LNEC 2013-2020. Os resultados da atividade desenvolvida são analisados e avaliados em face dos objetivos inicialmente previstos.
Ano: 2023
Autor(es): Lamas, L.; Muralha, J.; Pereira, R.
Keywords: Modelação numérica; Heterogeneidade; Mecânica das rochas; RockGeoStat
Info
Development of DamDamage3D1.0 - A MATLAB program for non-linear analysis of arch dams using a damage model
The main goal of this report is to present DamDamage3D1.0, a 3D finite element-based program for non-linear static analysis of arch dams, developed using MATLAB. The non-linear simulations are performed using a damage law and an iterative numerical method based on the stress-transfer technique, considering the redistribution of unbalanced forces in each iteration due to material damage. The concrete
Ano: 2019
Autor(es): Alegre, A.; Oliveira, S.
Keywords: Non-linear behaviour; Cabril dam; Compression damage; Tension damage; DamDamage3D1.0; Damage model; Concrete strength decrease scenario; Concrete arch dams; MATLAB 3DFEM program
Info
Development of DamDamage3D1.0. A MATLAB program for non-linear analysis of arch dams using a damage model
The main goal of this report is to present DamDamage3D1.0, a 3D finite element-based program for non-linear static analysis of arch dams, developed using MATLAB. The non-linear simulations are performed using a damage law and an iterative numerical method based on the stress-transfer technique, considering the redistribution of unbalanced forces in each iteration due to material damage. The concrete
Ano: 2019
Autor(es): Alegre, A.; Oliveira, S.
Editor: LNEC
Keywords: DamDamage3D1.0 / MATLAB 3DFEM program / Concrete arch dams / Cabril dam / Non-linear behaviour / Concrete strength decrease scenario / Damage model / Tension damage / Compression damage
Info
Development of GDams2D 1.0 - A MATLAB code for structural analysis of gravity dams using Lagrangian finite elements with 9 nodes
In this work we present the version 1.0 of the GDams2D 1.0 program developed for 2D analysis of gravity dams using the finite element method. This initial version of the program is prepared to analyze the structural behavior of gravity dams for static loads, considering linear-elastic behavior, and using Lagrange finite elements of 4 sides, with 9 nodal points. The GDams2D 1.0 program, developed in MATLAB, includes a module for automatic generation of meshes with a great level of refinement (generated from coarse meshes of quadrilaterals, with 4 nodal points at the vertices) and is designed for easy adaptation to non-linear analyzes, using stress-transfer modules such as those recently developed for the DamSlide3D and DamDamage3D programs. After a brief reference to the fundamentals of solid mechanics and to the simplified hypotheses of plane elasticity, the Fundamentals of the Finite Element Method (FEM) are presented, referring in particular the formulation of the four-node, linear and isoparametric, finite element (FE4nos), with two translation d.o.f per node, and the quadrangular FEs of 9 nodes (FE9nos) used in GDams2D 1.0. Based on some examples of application to simple 2D structures whose response is knownanalytically, the advantages of FEs are emphasized in relation to FE4nos and the verification and operability of GDams2D 1.0 is made using various discretizations. Finally, the case of a gravity dam (25 m high) is presented. The dam
Ano: 2019
Autor(es): Rodrigues, M.; Oliveira, S.
Keywords: Solid mechanics; p-refinement and h-refinement; Gravity dams; 2D Lagrangian finite elements; FEM convergence; Linear-elastic behavior
Info
Structural analysis of gravity dams considering non-linear behavior in the dam-foundation interface - Development of a 3DFE code using MATLAB: DamSlide3D
The main objective of this work is the development and presentation of a three-dimensional finite element program, DamSlide3D, to study the behavior of gravity dams for scenarios of sliding through the dam-foundation interface. The DamSlide3D, developed using MATLAB, includes cube-type finite elements with 20 nodal points ("serendipity") and finite interface elements with 16 nodal points (joint elements). Initially, we present the fundamental equations of Solid Mechanics, referring to the main simplified hypotheses considered in the computationally implemented formulation, which is presented mathematically as a problem of boundary values using a displacement formulation. For the structure body and for the foundation, the hypothesis of isotropic materials with linear elastic behavior is assumed and for the interfaces the hypothesis of non-linear behavior is considered using the Mohr- Coulomb criterion. The DamSlide3D input data is provided in an excel file and includes structure geometry data, material properties, support conditions and load parameters. As output, the program graphically displays the stress field (principal stresses) and the displacement field (deformed structure). The program was verified throughout three numerical tests with known theoretical solutions. In these tests a simple structure was used, composed by a column discretized in 3DFE. At the contact surface between the column and the base (horizontal surface) it was considered an interface discretized using joint finite elements. A plane surface that crosses the column with a given slope is also considered, discretized using the same type of joint finite elements. In the first test, the field of elastic stresses at the base, due to self-weight (SW) and hydrostatic pressure (HP), was compared with the theoretical results. In the second test the nonlinear column response was studied for different values of thefriction angle at the inclined interface (in this test the structure is only submitted to SW). In the third test, for the main SW + HP loads, the stability of the column is studied for a variation of the friction angle, and for a variation of the water level. In these three numerical tests the results were always consistent with the theoretical solutions. Finally, as an example of application, a gravity dam structural behavior was analyzed considering the non-linear behavior in the dam-foundation interface. The dam was subjected to self-weight and hydrostatic pressure. A parametric study was developed in order to study the dam stability for differentvalues of water level and friction angle.
Ano: 2019
Autor(es): Rodrigues, M.; Oliveira, S.
Keywords: Dam-foundation interface friction angle; Gravity dam; Mohr-Coulomb failure criterion; Stress-transfer; Interface non-linear behavior; Joint finite elements; 3D solid finite elements
Info
CoMatFail
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto CoMatFail até ao final de 2017. É feita a apreciação da atividade desenvolvida, nomeadamente quanto ao grau de cumprimento do plano de trabalhos, bem como dos objetivos específicos e dos indicadores de desempenho propostos na ficha de projeto. São ainda referidas as aplicações dos resultados da investigação em trabalhos contratados ao LNEC e as candidaturas a financiamento externo desenvolvidas no âmbito do projeto. Inclui-se em anexo a ficha do projeto atualizada, que contempla a revisão do plano de trabalhos.
Ano: 2018
Autor(es): Dias, I. M.; Lemos, J. V.; Mata, J.
Keywords: Análise até à rotura; Controlo de segurança; CoMatFail; Barragens de betão; Modelação numérica; Fratura material
Info
DEMRock6m
Neste relatório apresenta-se de forma sucinta a descrição da atividade de investigação realizada no âmbito do projeto DEMRock6m no período 2016-2017. Os resultados da atividade são analisados e avaliados em face dos objetivos inicialmente previstos, sendo proposta uma revisão do plano de atividades para os próximos três anos.
Ano: 2018
Autor(es): Muralha, J.; Lemos, J. V.; Espada, M.; Lamas, L.
Keywords: Estruturas de alvenaria; Barragens de betão; DEMRock6m; Mecânica das rochas; Modelos de elementos discretos; Modelos numéricos
Info
RockGeoStat
Neste relatório apresenta-se, de forma sucinta, a descrição da atividade de investigação realizada no âmbito do projeto RockGeoStat no período 2016-2017. Os resultados da atividade são analisados e avaliados em face dos objetivos inicialmente previstos, sendo proposto um prolongamento do projeto até ao final de 2018.
Ano: 2018
Autor(es): Lamas, L.; Muralha, J.; Espada, M.
Keywords: Modelação numérica; Heterogeneidade; Mecânica das rochas; RockGeoStat
|
Informações Científicas e Técnicas
Info
Identification of transversely isotropic parameters in overcored rock specimens - A back analysis approach
This document presents a back analysis procedure for identification of the elastic parameters of transversely isotropic rock cores, containing an overcoring triaxial strain probe, from the strains measured during a biaxial test. A three-dimensional finite element model was developed to simulate the biaxial test on the overcored rock specimen and to compute the strains at the location of the strain gauges. Different optimisation algorithms were tested and the most suitable one was selected. The back analysis procedure was tested for identification of the five elastic parameters and the two orientation angles that characterise a transversely isotropic rock core. In spite that, with the developed methodology, convergence was reached and all those parameters could be identified, sensitivity analyses demonstrated that the results obtained were not stable and therefore they were not reliable. By introducing constrains based on common practice and previous experience, a stable and robust methodology was achieved: the three elastic parameters, E1, E2 and ?2, are reliably identified using the value of G2 calculated with Saint-Venants expression and a fixed value of ?1, while the orientation parameters are obtained from observation of overcored rock. Analysis of the results shows that application of this methodology represents an enormous step forward when compared with the traditional use of isotropy. Besides, the methodology is general and can also be used with other types of overcoring equipment. The five elastic parameters and the two orientation angles obtained can then be used, together with the overcoring strains, to compute the complete in situ state of stress.
Ano: 2018
Autor(es): Espada, M.; Lamas, L.
Keywords: Transversely isotropic rock; Numerical method; Rock test; Optimisation; Triaxial strain probe; In situ stress; Overcoring; Biaxial test
Info
Stability analysis of excavation slopes of Baihetan arch dam foundation - Reliability analysis by application of the response surface method
This document presents the work developed by the PhD student Margarida Espada in the scope of the course unit Risk Analysis in Geotechnical Works of the Doctoral Program in Civil Engineering of the Faculty of Engineering of the University of Porto (FEUP). This work presents a reliability analysis, using the response surface method (RSM), for the case study of the left bank excavation slopes of the Baihetan arch dam foundation, which is one of the case studies of Margarida Espada's PhD thesis. The aim was to approximate an implicit limit state function by computing safety factors, using a discrete element model of the Baihetan left bank developed in 3DEC software, where the shear strength parameters of two important rock discontinuities were considered as random variables. The probability of failure was then obtained through an iterative process, using approximation methods. This work presents the 3DEC model developed to analyse the stability conditions in the Baihetan left bank and the results of the reliability analysis.
Ano: 2018
Autor(es): Espada, M.
Keywords: Dam foundation; Baihetan dam; Discrete element method; Reliability; Slopes stability
Info
Contribuição para o problema da existência e suavidade da solução da equação de Navier- Stokes
O problema da solução das equações de Navier Stokes é abordado neste trabalhopropondo-se uma técnica de representação das incógnitas deslocamentos e pressõesvariáveis no espaço e no tempo em série de Delta de Dirac e suas derivadas no tempocujos coeficientes se determinam com base na solução de sistemas de equaçõesdiferenciais definidos no espaço (problema com três variáveis espaciais independentesque pode ser estudado pelo método de Monge).
Ano: 2011
Número Páginas:
12pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Equação de navier-stokes
Info
Elastodinâmica
Neste relatório apresentam-se as equações básicas da elastodinâmica linear, as soluçõesfundamentais e o teorema da representação no domínio de tempo e de frequência.Para movimentos finitos de casca formula-se o teorema dos trabalhos virtuais e a suaimplementação pelo método dos elementos finitos.
Ano: 2007
Número Páginas:
54pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Método dos elementos finitos; Elastodinâmica
Info
Modelação sísmica de barragens abóboda
Neste relatório apresentam-se os principais aspectos da modelação sísmica de barragensabóbada. Assim propõe-se: modelos numéricos de geração de sismos por uma falha; aforma como o sismo actua na barragem; modelos para estudar a influência da albufeirana vibração do conjunto; métodos para solução das equações do movimento; e novasformulações de elementos finitos para o problema estrutural.
Ano: 2005
Número Páginas:
72pp.
Autor(es): Câmara, R.
Editor: LNEC
Keywords: Método dos elementos finitos; Simulação numérica; Comportamento sísmico de estruturas; Comportamento de barragens; Barragem abóboda
Info
An experimental and numerical study for analysis of the hydromechanical behavior of the Alto Lindoso high pressure circuit
In pressure tunnels and shafts, in addition to the mechanical effect that excavation has on the rock mass and the disturbance that it introduces in the water flow, also the contained water can interact from the mechanical and hydraulic points of view with the rock mass. Seepage in fractured rock masses is dominated by the flow that takes place through the joints, and this is highly d(;pendent on their properties, namely aperture and roughness. Joint aperture, in tum, i::; very sensitive to stress changes. Special attention must therefore be paid to the joints in hydromechanical analyses. In this report are presented some studies that were carried out for the hydromechanical characterization of joints of the Alto Lindoso rock mass and numerical simulations of the hydromechanical behaviour of two selected sections of the high pressure circuit.
Ano: 1994
Autor(es): Lamas, L.
Keywords: Simulação numérica; Barragem de Alto Lindoso; Percolação no solo; Maciço rochoso; Comportamento hidromecânico; Interacção solo-água-estrutura; Circuito hidráulico
|
|
|