Publicações

Poplar wood is a light, soft, and fast-growing timber from a hardwood species, characteristics that make it suitable for several applications. This study focused on the mechanical characterization of Portuguese poplar species, namely white poplar (Populus Alba) and black poplar (P. nigra), aiming for its structural use. Therefore, a sample of lamellae was assessed to determine its density and dynamic modulus of elasticity, using a non-destructive device, based on longitudinal vibrations. Clear wood specimens were obtained from a set of lamellae to perform tension and compression parallel-to-grain tests. These tests were used to determine the moduli of elasticity in tension and compression and the tensile and compressive strengths and strains. Also, typical stress-strain curves were identified for the sample studied. The results stressed the potential for structural applications of Portuguese poplar.

N/A

Four types of sandwich panels with multilayered designs were produced using wood veneer of Aleppo pine as face and inner sheets, and cork agglomerate as core,intended for use in construction as panelling or partition walls in interior applications. These multilayered sandwich panels were characterized regarding static hardnessand dimensional stability when facing changes in relative humidity and when subjected to a deformation. The panels showed a considerable increase in dimensional stability and shear strength with the increase of the number oflayers. The results suggest that the correct design choice, for example number of inner wood sheets and thickness of cork core layers, allows these sandwich panels to be used as non-structural construction elements such as partition walls.

Changes in flagellate protist communities of subterranean termite Reticulitermes gras-sei across different locations were evaluated following four predictions: (i) Rural endemic (Portugal mainland) termite populations will exhibit high diversity of symbionts; (ii) invasive urban populations (Horta city, Faial island, Azores), on the contrary, will exhibit lower diversity of symbionts, showing high similarity of symbiont assemblages through environmental filtering; (iii) recent historical colonization of isolated regions

This paper describes the use of non-destructive methods to assess the mechanical properties of structural glued laminated timber made from poplar. The longitudinal vibration method and transformed section method were considered. Full-scale tests were also performed to determine the most relevant mechanical properties of 18 beams, namely modulus of elasticity and bending strength. In addition, the bonding performance of each beam was checked by delamination and shear strength tests. Detailed analysis of the results was performed and combined with Levene's and Tukey's tests. The accuracy of the two non-destructive test methods was evaluated by linear regression analysis. The transformed section method showed stronger correlations with modulus of elasticity and shear strength. Slightly lower values were presented by the longitudinal vibration method. A strength class of GL24c can be assigned for glued laminated poplar made with timber with lower properties at the inner lamellas.

Pine (Pinus pinaster Ait.) wood samples were subjected to a combined treatment by densification and heat treatment. Samples were densified before and after heat treatment. The heat treatment was made inside an oven at 190ºC during 2 to 6 h and wood densification was made in a hot press at around 48 bar pressure and temperatures between 160ºC and 200ºC for 30 min. Compression-set, compression-set recovery after three cycles of water soaking followed by oven drying, density, hardness, bending strength and stiffness and durability against subterranean termites were determined after the treatment. Results show that densification increases density, hardness, bending strength, stiffness and durability against termites. Heat treatment applied after the densification is more effective in reducing compression-set recovery than if applied before.

The ability of subterranean termites to digest lignocellulose relies not onlyon their digestive tract physiology, but also on the symbiotic relationshipsestablished with flagellate protists and bacteria. The objective of this workwas to test the possible effect of different cellulose-based diets on the communitystructure (species richness and other diversity metrics) of the flagellateprotists of the subterranean termite Reticulitermes grassei. Termitesbelonging to the same colony were subjected to six different diets (naturaldiet, maritime pine wood, European beech, thermally modified Europeanbeech, cellulose powder and starvation), and their flagellate protist communitywas evaluated after the trials.All non-treated sound woods produced similar flagellate protist communitiesthat were more diverse and of high evenness (low dominance).On the contrary, flagellate protist communities from cellulose-fed termitesand starving termites were considered to be significantly different from allnon-treated woods; they were less diverse and some morphotypes becamedominant as a consequence of flagellate protist communities having sufferedmajor adaptations to these diets. The flagellate protist communitiesof untreated beech and thermally modified beech-fed termites were consideredto be significantly different in terms of abundance and morphotypediversity. This may be caused by a decrease in lignocellulose qualityavailable for termites and from an interference of thermally treated woodwith the chemical stability of the termite hindgut.Our study suggests that as a consequence of the strong division oflabour among these protists to accomplish the intricate process of lignocellulosedigestion, termite symbiotic flagellate protist communities are adynamic assemblage able to adapt to different conditions and diets. Thisstudy is important for the community-level alteration approach, and it isthe first study to investigate the effects of thermally modified wood on theflagellate protist communities of subterranean termites.

Serviceability limit states (related to deformation) rather than ultimate limit states (related to collapse)are often the reason for the need to assess existing timber structures. Prediction of timber members

Monitoring and evaluation of glued laminated timber structures in service is essential to warrant its integrity, where non-destructive techniques play an important role. This paper describes the results obtained on glued laminated timber beams of maritime pine, with and without preservative treatment, and of spruce, exposed to naturaloutdoor environment as well as to artificial weathering. The assessment of glue lines

This paper presents work carried out with the aim of characterizing the mechanical behavior and developing visual and machine strength grading systems for Portuguese maritime pine roundwood for structural applications. Two samples of forty maritime pine logs each were collected, one in a northern region of Portugal and another in an interior central region. After drying, the logs were visually graded andsubjected to nondestructive tests, using vibration and ultrasounds, for determination of dynamic modulus of elasticity. The logs were then subjected to destructive tests for determining bending and compression strength and bending modulus of elasticity. These results were analyzed in order to identify the features to be considered in the strength grading process. From this analysis, a proposal was developed tovisually grade Portuguese maritime pine roundwood in two strength grades. According to the European strength class standard for solid timber, the upper grade has similar mechanical properties to the C50 class, whereas the lower grade is similar to the C35. The machine grading showed good potential as a result of the good correlation presented between the dynamic modulus of elasticity and the mechanical properties. However, the ultrasounds showed slightly better correlation than the vibration method, whereas the last one is more practical.

Housing is crucial for living and well-being. Due to its vulnerability, one of the most severe consequences after natural disasters has been the destruction of houses, causing impressive numbers of homeless people.After those situations, it is imperative to start the reconstruction works and the provision of houses is a crucial task, since they can help to restore the livelihoods of the affected people. The urgency to supply housing quickly, has lead the formal construction sector to neglect user

Bridge falsework systems are frequently used in the construction, rehabilitation and retrofit works of bridge structures. These structures have a significant impact on the cost, construction rate and construction safety of the supported permanent structures. However, the relevant stakeholders often do not consider them as important as permanent structures, and in the recent years a high number of accidents involving bridge falsework systems have been reported. A research programme was initiated aiming to contribute to a better knowledge about the structural behaviour, reliability and robustness of bridge falsework systems. In this paper the advances and existing challenges in the design of bridge falsework systems will be resumed. Additionally, a framework for the structural design of these structures within the context of a risk informed decision-making will be presented.

No presente trabalho pretende-se apresentar os resultados mais relevantes obtidos num programa experimental desenvolvido no LNEC com o objetivo de caracterizar a aderência dos varões nervurados do tipo A500NR SD existentes no mercado, fundamentalmente para melhorar a modelação do comportamento dos elementos de betão armado de zonas críticas de estruturas inseridas em zonas sísmicas.O programa experimental desenvolvido pretende simular as condições de aderência existentes num varão horizontal de uma ligação viga-pilar e tem como principais variáveis varões de dois diâmetros frequentemente utilizados (16 e 25mm), dois níveis diferentes de área relativa das nervuras (A e B) e duas classes de betão (NSC e HSC), ambos representativos do betão utilizado nas construções mais relevantes.Os resultados obtidos quer nos ensaios monotónicos quer nos ensaios cíclicos apontam para um decréscimo da tensão de aderência com o aumento do diâmetro da ordem dos 10%. O aumento da área relativa das nervuras transversais traduz-se num incremento da tensão máxima de aderência da ordem dos 15%, com uma redução do deslizamento que ronda os 18%. Em termos de resistência do betão, verifica-se um aumento da tensão de aderência compatível com o aumento da resistência do betão mas mais significativo nos varões de 16mm.

Apresenta-se uma proposta de nomenclatura e classificação dos principais sistemas estruturais de madeira para habitação. A proposta justifica-se por não haver uma terminologia estabilizada para nomear cada sistema estrutural. Esta situação pode conduzir a erros de interpretação e comunicação. Constata-se que tanto a nível nacional como internacional, diferentes expressões podem designar o mesmo sistema, assim como a mesma expressão pode designar sistemas diferentes. As nomenclaturas variam em função dos contextos em que surgem, o que dificulta o reconhecimento dos sistemas quando se consultam manuais e textos da especialidade. Não é suficiente, por isso, um mero trabalho de tradução das designações dos sistemas, sendo importante esclarecer algumas ambiguidades encontradas. Efectuou-se uma consulta sistemática a manuais de construção em madeira e trabalhos académicos relevantes para o tema, reunindo-se as diferentes nomenclaturas e formas de classificação com os objectivos de identificar os sistemas referidos e auxiliar na execução da proposta apresentada. Na proposta estabeleceu-se uma primeira divisão dos sistemas estruturais de madeira em função da geometria dos elementos, em quatro grupos: 1) Sistemas de componentes lineares, 2) Sistemas de componentes planos, 3) Sistemas de componentes tridimensionais e 4) Sistemas mistos. Cada um destes grupos foi depois dividido em função do peso dos componentes (componentes leves e componentes pesados). Depois particularizaram-se os tipos genéricos de sistemas estruturais, em função das características dos componentes a colocar e montar em obra, identificando-se: 1.1.1) Reticulados leves; 1.2.1) Porticados; 1.2.2) Reticulados pesados; 2.1.1) Paredes leves; 2.1.2) Painéis leves; 2.2.1) Paredes pesadas; 2.2.2) Painéis pesados; 3.1.1) Módulos tridimensionais parciais; 3.2.1) Módulos tridimensionais completos; 4.1.1) Sistemas mistos leves; 4.1.2) Sistemas mistos pesados. Enumeraram-se depois os principais tipos estruturais específicos encontrados no mercado e na literatura. Para além de uma classificação com base nas características dos componentes incluíram-se duas alternativas organizadas do ponto de vista do grau de pré-fabricação e do ponto de vista das unidades de projecto envolvidas. Por fim, a proposta foi complementada com esquemas gráficos representando cada tipo específico através dos elementos essenciais da estrutura vertical, bem como uma caracterização básica dos tipos genéricos.

Subterranean termites are serious pests of wood in service in much of the world. One of the most effective techniques for monitoring and controlling termites is the use of in-ground baiting systems which comprise a wood or other cellulosic material bait and/or a termiticide bait held in a open plastic cage so facilitates examination and the termites' access. Wood and other cellulosic substrates are subjected not only to termite attack, but also to fungal decay, which may interfere both with usefulness of the baiting system and with termite attraction.Decay susceptibility of commercial baits was accessed during one year in the field. Variables evaluated were: mass loss of bait, meteorological data (cumulative rain, average temperature, average relative humidity), moisture content of substrate, termite presence, type of wood/ cellulose substrate (cellulose powder,Pinus spp., Populus spp., Pinus pinaster, Hevea brasiliensis, cardboard), baiting model (Advancetm, FirstLineTM,Terminatetm, LNEC)and a wood borate-based treatment.A multivariate analysis (RDA) was performed, resulting in 78.8% of mass losses variability being explained by the decay factors considered in this analysis. Five factors were considered significant (P

Ano: 2012

Número Páginas: 1.

Autor(es): Duarte, S.; Taylor, A.; Kim, J.; Lloyd, J.; Duarte, M; Lina Nunes

Keywords: Inground baiting systems; Bait design; Fungal decay; Subterranean termites

N/A

N/A

N/A

N/A

O Museu da Academia das Ciências de Lisboa possui uma preciosa xiloteca assinada pelo Mestre dos marceneiros portugueses, José Aniceto Rapozo contendo 1213 amostras de madeiras do Brasil e 12 de outras origens. A sua importância no progresso do conhecimento dos recursos florestais do Brasil naviragem dos séculos dezoito e dezanove conduziu ao estudo em curso. Dada a devastação verificada em vastas áreas florestais brasileiras, surgem dificuldades por certas espécies poderem ter distribuiçãogeográfica diferente (com eventual extinção, geral ou localizada), por insuficiência do material de comparação, e por ambiguidade das designações comerciais.Foi possível identificar esta xiloteca como uma de quatro encomendadas a Aniceto Rapozo pelo Príncipe Regente. A análise das amostras de madeira e a informação documental mostram que a colecçãotem por base uma remessa de 5008 amostras de madeiras do Brasil enviada em 1784 para o Arsenal Real do Exército, em Lisboa, pelo Vice-Rei do Brasil, Luís de Vasconcellos e Souza.O valor científico do conjunto é evidenciado pela identificação botânica das espéciesrepresentadas. Na situação actual, a identificação das espécies florestais representadas na amostragem foiinteiramente conseguida em 14% dos casos, conseguida mas ainda por confirmar em 27%. Dado o carácter preliminar deste estudo, os seus resultados serão ulteriormente publicados com mais pormenor. Among the Lisbon Academy of Sciences Museum collection there is a valuable xylarium by theleading Portuguese master cabinet-maker José Aniceto Rapozo (1756-1824), comprising 1213 wood samples from Brazil plus 12 from elsewhere. This collection is most important since it allows us to improve the knowledge on Brazilian forest resources by the end of the eighteenth century and thebeginning of the next. This study aims to establish its historical framework and scientific value. Owing tooverexploitation and even devastation of very large forest areas in Brazil, difficulties for our study aroseeither as some species may have now a different geographical distribution (and eventually may have underwent local or general extinction), by lack of adequate comparison material, or because of ambiguityof the commercial names.Results so far obtained allowed us to recognize the xylarium as one of the four commanded Rapozo by the Regent Prince, later King João VI (1767-1826). Taking into account the wood samples analyses as well as bibliographic data it is possible to conclude that the collection was prepared from a set 3 of 5008 Brazilian wood samples sent to the Royal Arsenal in Lisbon in 1784 by the Brazil

This work collects information about laboratory tests to evaluate the properties of agro-industrial wastes used for thermal insulation building materials considering them individually and in composits. It focuses on bio-susceptibility, as one of the main aspects to consider for bio-based building products.

Innovation in structures and construction materials demands a more accurate performance analysis during the life cycle. In addition, climatic changes pose new challenges to civil infrastructures that were not so relevant in the past. In most cases, the traditional test methods cannot accurately assess the complex phenomena involved in durability. The modern and complex factors require a different approach to durability analysis. The purpose of this chapter is to present innovative durability tests on construction materials: wood; rammed earth, cob and unfired blocks; natural stone; bituminous binders and mixtures; and Fibre Reinforced Polymers (FRP) to concrete bonded connections. Most of these tests concern the accelerated simulation of the main phenomena involved in durability performance

Laboratory tests were carried out to define production parameters of innovative eco-efficient composites made up of hazelnut shells as aggregate and a sodium silicate solution as adhesive. The aim was to maximize the content of bio-aggregates and minimize the amount of adhesive, guaranteeing the feasibility of producing samples. Therefore, after preliminary testing, the percentages of hazelnut shells and the sodium silicate solution were kept constant: 70% and 30% of the total volume, respectively. However, the characteristics of the considered composites did not allow the production of uniform samples. The sodium silicate solution was not rapidly absorbed by the bio-aggregates; during the drying process, it was deposited on the bottom side of the samples. The uniformity of the samples is required to guarantee a correct evaluation of their performance and future homogeneous panels. Hence, different production parameters were investigated, such as drying at T

The durability of construction materials is a key concern and can be related to different actions such as weathering conditions outdoors enhanced by climatic change, chemical and biological attack, abrasion, and other conditions of service over time. Frequently, several actions develop simultaneously, making it difficult to reproduce in situ conditions in laboratory. Furthermore, testing to assess durability depends largely on the nature of the material itself or on the way it has been assembled with other materials. The ageing techniques to assess long-term durability performance of construction materials are based on accelerated durability tests, which include, for example, thermal stress, freeze

This paper presents an overview of research carried out to assess the bonding suitability of Portuguese timbers.Most work developed in the last decades has focused Maritime pine timber, due to its traditional use in building construction, good mechanical properties and availability. Untreated, as well as preservative treated Maritime pine have been studied, as its impregnability allows deep treatment suitable for applications in Use Classes 3 and 4.Recent results on bonding preservative treated Maritime pine wood are discussed.Preliminary results regarding other species that are becoming available in the Portuguese market are also presented, as an attempt to reduce pressure on Maritime pine timber as well as to seek more valuable alternatives for their traditional uses.

No presente trabalho apresentam-se os resultados mais relevantes obtidos num programa experimental desenvolvido no LNEC com o objetivo de caracterizar a aderência dos varões nervurados do tipo A500NR SD existentes no mercado, fundamentalmente para melhorar a modelação do comportamento dos elementos de betão armado de zonas críticas de estruturas inseridas em zonas sísmicas.O programa experimental desenvolvido pretende simular as condições de aderência existentes num varão horizontal de uma ligação viga-pilar e tem como principais variáveis varões de dois diâmetros frequentemente utilizados (16 e 25 mm), dois níveis diferentes de área relativa das nervuras (A e B) e duas classes de betão (C1 e C2), ambos representativos do betão utilizado nas construções mais relevantes.Os resultados obtidos quer nos ensaios monotónicos quer nos ensaios cíclicos apontam para um decréscimo da tensão de aderência com o aumento do diâmetro da ordem dos 10%. O aumento da área relativa das nervuras transversais traduz-se num incremento da tensão máxima de aderência da ordem dos 15%, com uma redução do deslizamento que ronda os 15%. Nesse sentido, este estudo propôs que, no caso dos varões com maior área relativa das nervuras, a tensão de aderência máxima possa variar entre 2,35 e 2,65 vezes a raiz quadrada da resistência do betão à compressão e que o patamar onde a tensão de aderência é máxima se situe entre 0,5 e 1,5 mm de deslizamento.Explorou-se também o fenómeno da entrada em cedência da armadura tendo-se concluído que, em provetes que pretendem simular as condições de aderência existentes num varão horizontal de uma ligação viga-pilar, a entrada em cedência da armadura conduz a uma redução da tensão de aderência máxima inferior a 10%, quer regime monotónico quer em regime cíclico.

O presente trabalho de investigação refere-se à conservação de elementos estruturais de madeira medianamente degradados por fungos em edifícios antigos. Propõe-se estudar a compatibilidade entre produtos de tratamento e de consolidação por impregnação, aplicados sequencialmente. A avaliação do processo foi realizada maioritariamente em laboratório e na óptica do desempenho mecânico conjunto da madeira e produtos aplicados, por intermédio de ensaios físico-mecânicos destrutivos e não destrutivos e também por ensaios mecânicos não destrutivos realizados in situ. Foram utilizados produtos comerciais, aplicando-os às espécies de madeira correntemente encontradas nos edifícios antigos da zona de Lisboa: Pinho bravo e Casquinha. Procedeu-se à avaliação mecânica de madeira nova e antiga, em estado são e degradado; ao desenvolvimento de um método de medição da profundidade de penetração de produtos de tratamento; à avaliação da capacidade consolidante de madeira degradada por produtos poliméricos fluidos e à avaliação da sua actuação conjunta, estudada com e sem envelhecimento artificial. Os resultados obtidos indicaram significativos aumentos de capacidade mecânica da madeira degradada, quando submetida a tratamento e consolidação Este trabalho desenvolve, assim, uma proposta de solução para a madeira que não se encontra sã, mas que ainda possui capacidade resistente, não necessitando, por isso, de ser removida. O processo de tratamento e consolidação promove resistência aos agentes biológicos e, simultaneamente, recuperação de alguma resistência mecânica da madeira, conferindo-lhe capacidade para continuar em serviço.

Subterranean termites from the genus Reticulitermes are an important pest ofwood in service throughout southern Europe and elsewhere. For effective termitecontrol with long term protection but minimal environmental damage, newintegrated approaches to termite management are needed. Baiting-based systemsseem to be promising non-traditional methods for termite control, targeting thecolony as a whole. However, control through baiting is only feasible when it isknown that the toxicant can be transferred to all the colonies foraging on theinfested area and also throughout each individual colony. Accordingly, the workdescribed is specifically designed to achieve a better understanding of thedistribution and delimitation of colonies within a population of Reticulitermes,with parallel insights into foraging behaviour and colony organization.Initially, the species/subspecies spectrum present within the notionalReticulitermes group in Portugal was reassessed. It was shown that Reticulitermesgrassei is the only species encountered. Foraging activity was then assessed in anexperimental woodland site over two successive annual cycles, both by thesampling of natural lying dead wood and by a standard baiting grid. R. grasseiseem to select wood with larger diameter, with an apparent preference for materialalready decayed by fungi. Both termite and fungal attack on wood seems to bepromoted by higher moisture levels, such as prevail in larger litter items andduring seasonal rains. Termites were unable to detect and direct their foragingtowards sound wood in laboratory conditions, suggesting that the network ofinfochemical signals is more complex than just volatiles emanating from soundwood. Mark-release-recapture (MRR) was used to delineate foraging groups,which were then allocated to their parent colonies by the use of microsatellitemarkers. The results suggest that resource sharing is a facultative behaviour,specifically when food is not a limiting factor for colony development. Theimplications of all these findings for bait technology and protocols are discussed,with reference to the local population ecology of Reticulitermes.

The project CircularBuild -

Relatório final do projeto PTDC/ECM/099121/2008

O presente trabalho apresenta um projecto de versão portuguesa da Norma Europeia EN 10002-2, e insere-se numa série de estudos programados pelo autor, enquanto coordenador da normalização nacional no domínio dos ensaios mecânicos, físicos e não-destrutivos de materiais metálicos.O texto do projecto de norma apresentado consiste na versão final de uma proposta redigida pelo autor, na sequência dos estudos efectuados ao nível da Comissão Técnica de Normalização competente.

O presente trabalho apresenta um projecto de versão portuguesa da Norma Europeia EN 10002-5, e insere-se numa série de estudos programados pelo autor, enquanto coordenador da normalização nacional no domínio dos ensaios mecânicos, físicos e não-destrutivos de materiais metálicos.O texto do projecto de revisão apresentado consiste na versão final de uma proposta redigida pelo autor, na sequência dos estudos efectuados ao nível da Comissão Técnica de Normalização competente.

O presente relatório descreve a participação do LNEC no programa europeu de intercomparação de calibrações de forças

O presente trabalho apresenta um projecto de revisão da Norma Portuguesa NP 850 (1985)

O presente trabalho apresenta um projecto de revisão da Norma Portuguesa NP 386 (1965)

O presente trabalho apresenta um projecto de revisão das Normas Portuguesas NP 449 (1966)

O presente trabalho apresenta um projecto de revisão da Norma Portuguesa NP 450 (1966)

O presente trabalho apresenta um projecto de Norma Portuguesa relativo ao ensaio de dilatação de anéis de tubos metálicos, e insere-se numa série de estudos programados pelo autor, enquanto coordenador da normalização nacional no domínio dos ensaios mecânicos, físicos e não-destrutivos de materiais metálicos, com a finalidade de preencher lacunas da Normalização Portuguesa neste domínio que a indústria e as instituições ligadas ao controlo da qualidade considerem ser mais urgente colmatar.O texto apresentado consiste na versão final de uma proposta redigida pelo autor, na sequência dos estudos efectuados ao nível da Comissão Técnica de Normalização competente.

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A

N/A